Skip to content

Latest commit

 

History

History
59 lines (35 loc) · 1.94 KB

README.md

File metadata and controls

59 lines (35 loc) · 1.94 KB
Raw

Bear Frame Upgrade 2.1

MMU2(S) Frame Holder for Bear Frame

Table of contents

  1. Introduction
  2. Pictures
  3. Compatibility
  4. Bill of materials
  5. Printed parts
  6. Print Settings

Introduction

MMU2 and MMU2S frame holder for the Bear Frame Upgrade.

Pictures

MMU2(S) mount

MMU2(S) mount

Compatibility

This MMU2(S) frame holder is compatible with both MMU2 and MMU2S.

Bill of materials

Part Quantity Example
M5x10mm button head screw (ISO 7380) 2
Drop-in tee-nuts M5 2 Openbuilds

Printed parts

⚠️ Warning: It is important to follow the recommended print settings and to calibrate your extrusion multiplier before printing the parts (for each and every spool that you use). Check our calibration guide here.

Use this link to download the STL: mmu2_frame_holder.stl

Print settings

⚠️ Warning: It is important to follow the recommended print settings and to calibrate your extrusion multiplier before printing the parts (for each and every spool that you use). Check our calibration guide here.

  • Slicer : PrusaSlicer recommended
  • Infill type : Gyroid recommended
  • Support : No
  • Brim : No
  • Detect thin walls : No
  • Perimeters width (internal and external) : 0.45mm
Layer Height Infill Perimeters Top/Bottom Layers
0.20mm 20% 3-4 5