my_machine.h

/*
  my_machine.h - configuration for STM32F103C8 ARM processors

  Part of grblHAL

  Copyright (c) 2020-2023 Terje Io

  Grbl is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  Grbl is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with Grbl.  If not, see <http://www.gnu.org/licenses/>.
*/

// NOTE: Only one board may be enabled!
// If none is enabled pin mappings from generic_map.h will be used.
//#define BOARD_CNC3040
//#define BOARD_CNC_BOOSTERPACK
//#define BOARD_MACH3_BOB
//#define BOARD_BTT_SKR_MINI_E3_V20
//#define BOARD_BTT_SKR_MINI_E3_V20_ALT2
//#define BOARD_MY_MACHINE // Add my_machine_map.h before enabling this!

// Configuration
// Uncomment to enable.

#ifndef USB_SERIAL_CDC
#define USB_SERIAL_CDC       1 // Serial communication via native USB. Comment out for UART communication.
#endif
//#define SAFETY_DOOR_ENABLE 1 // Enable safety door input.
//#define SDCARD_ENABLE      1 // Run gcode programs from SD card, requires sdcard plugin.
//#define KEYPAD_ENABLE      1 // Set to 1 for I2C keypad, 2 for other input such as serial data
//#define ODOMETER_ENABLE    1 // Odometer plugin.
//#define TRINAMIC_ENABLE 2130 // Trinamic TMC2130 stepper driver support. NOTE: work in progress.
//#define TRINAMIC_ENABLE 5160 // Trinamic TMC5160 stepper driver support. NOTE: work in progress.
//#define TRINAMIC_I2C       0 // Trinamic I2C - SPI bridge interface.
//#define TRINAMIC_DEV       1 // Development mode, adds a few M-codes to aid debugging. Do not enable in production code.
//#define EEPROM_ENABLE      1 // I2C EEPROM support. Set to 1 for 24LC16(2K), 2 for larger sizes. Requires eeprom plugin.
//#define EEPROM_IS_FRAM     1 // Uncomment when EEPROM is enabled and chip is FRAM, this to remove write delay.

/**/