Skip to content

Latest commit

 

History

History
297 lines (233 loc) · 13.8 KB

CONTRIBUTING.md

File metadata and controls

297 lines (233 loc) · 13.8 KB
Raw

Syncing with upstream

Assumptions

This guide uses 'Loki Distributed' chart as an example which is one of the charts held in upstream helm-charts repo.

I want to easily track it, but also be able to submit patches to upstream as well as make some specific changes that I never want to go to upstream.

Repositories types and setup

We will be working with 3 git repositories per project. This covers the most complex scenario, where we track upstream repo that hosts multiple charts in a single repository and we want to track all of them, but finally get just a single chart from there.

Please note, that for a simpler scenario, where you just want to track a subdirectory of an upstream repository and in general repository layout is very similar to what you have or when you don't plan to submit patches to upstream, you can successfully use this method with just 2 repositories, "upstream" and "chart repo".

The three repos we're going to use are:

  • Original upstream repo https://github.com/grafana/helm-charts/tree/main/charts/loki-distributed. Every time I say "upstream" repo, I mean this one. It is read-only for us and maintaned by external organization.
  • (Optional, but recommended) Our copy for tracking the "upstream". We will fork the upstream to create what we call "upstream copy" repo. This repo will be used for easily contributing changes into the upstream repo. In this repo we prepare patches we hope can be accepted by upstream. Our workflow allows us to submit a patch to "upstream" and either use the patch before it is accepted or wait until it is accepted upstream and shows in one of the branches of "upstream". If this repo is a multi-chart repo, where all the charts share some code, it is also a perfect place to apply patches to the shared code, whether we want to submit them to upstream or not.
  • Chart repo. The "chart repo" is the one where we keep a single chart we want to build for the app platform. Here we apply all the changes and patches that we need to make it work, but also don't really want to send to "upstream" (so, any Giant Swarm specific stuff).

Setting up repos

Everything here will be shown as an example based on the grafana's helm charts repo. Please make sure to go there and have a look at how the repo is organized before you read on.

Upstream copy

Let's start with creating "upstream copy". Go on github to the "upstream" repo and fork it. Make sure to change the default repo name into something meaningful and ending with "-upstream". In my example, the default repo name was giantswarm/helm-charts, but I changed it to grafana-helm-charts-upstream.

Now, clone the "upstream copy" repo to your machine:

git clone [email protected]:giantswarm/grafana-helm-charts-upstream.git
cd grafana-helm-charts-upstream

We will use the "upstream copy" repo in the following way:

  • main (or master) - this is the branch we will use in "chart repo". It is tracking "upstream", but also will include all our patches to "upstream" that we hope to be accepted by upstream project some day, but need to use right away.

  • upstream-main - to directly track main/master branch from "upstream". This branch is read-only for us; we only use it to synchronize with "upstream". We set it up by adding a new remote and setting merge config for it:

    git checkout -b "upstream-main"
git remote add -f upstream https://github.com/grafana/helm-charts.git
git branch -u upstream/main
git push origin upstream-main
# now we can pull changes from "upstream"/main and merge to our "upstream copy"/upstream-main

  • or using the new Git syntax:

    git remote add -f upstream https://github.com/grafana/helm-charts.git
git switch -c upstream-main upstream/main # creates branch and sets tracking
git push origin upstream-main

Chart repo

Now, it's time to create our "chart repo" and reference the code we have in "upstream copy". Go to github and create a new repo using the ginatswarm-template-app template. I've created https://github.com/giantswarm/loki-app.

Clone this repo to your local machine and setup "upstream copy" as remote to track:

git clone [email protected]:giantswarm/loki-app.git
cd loki-app
git rm -r helm/APP-NAME-app && git commit -am "remove template chart" && git push  # optionally remove the chart template
git remote add -f --no-tags upstream-copy [email protected]:giantswarm/grafana-helm-charts-upstream.git  # add remote

Please not the --no-tags flag. If you add it, no tags from remote repo will be added to yours. This means you won't "pollute" your local repo, which is a good thing, but also it will make impossible to check what upstream means by specific tag. This might be useful, especially when you're migrating to the subtree workflow. The decision to include tags is yours, but as a rule of thumb it's better to not include them unless you know they are useful for you.

Now, we add code from "upstream-copy" as subtree. We have 2 options here:

  1. We add the whole "upstream-copy" repo, as it is in main branch, as a subdirectory in the current repo

    git subtree add --prefix helm/loki-app upstream-copy main --squash
git push

    That's it, now your helm/loki-app has the same content as is present in the main branch of upstream-copy remote. The --squash option squashes all the incoming commits into one big commit, which is a good thing, as otherwise you'll put all the commits from upstream into your local repo and make the history really noisy.

  2. More complex scenario: we want to add only the charts/loki-distributed subdirectory from the main branch of upstream-copy. To do that, we first need to use the subtree split command to go over all commits and split only these that altered files in this directory into a temporary branch temp-split-branch. Then we add this branch as a subtree:

    git fetch upstream-copy main  # fetch the most recent state from "upstream copy/main"
git checkout upstream-copy/main  # it's OK to be in detached head, we won't change anything
git subtree split -P charts/helm-distributed -b temp-split-branch
git checkout master
git subtree add --squash -P helm/loki-distributed temp-split-branch

    Important: here we use main from upstream-copy as the state we want Most probably it makes more sense for you to use some other state of the upstream-copy, like a vX.Y.Z tag, which means a stable release of the chart. Here we're tracking the cutting edge in main repo.

Workflows

I want to setup my local repos after they were already created for the first time

  • to setup "upstream-copy":

    git clone [email protected]:giantswarm/grafana-helm-charts-upstream.git
cd grafana-helm-charts-upstream
git checkout upstream-main
git remote add -f upstream https://github.com/grafana/helm-charts.git

  • to setup "chart repo"

    git clone [email protected]:giantswarm/loki-app.git
cd loki-app
git remote add -f --no-tags upstream-copy [email protected]:giantswarm/grafana-helm-charts-upstream.git  # add remote

I want to update to the latest version from upstream

Assuming you want to get to the state of main branch in upstream-main. If you want any other state, replace upstream/main with any other branch or just tag: v.X.Y.Z (to see upstream tags, you need to skip the --skip-tags flag, as explained above in set up instructions).

  1. In "upstream-copy" repo
  • checkout "upstream-main" branch
  • fetch changes from "upstream/main", merge them with "upstream-main"
  • checkout "main", merge "upstream-main" to it, push "master"
  • example commands:
git checkout upstream-main
git fetch upstream
git merge upstream/main  
# create PR in github from upstream-main to main XOR run
git checkout main
git merge upstream-main
git push
  1. In "chart repo"
  • if the subtree is tracking the whole "upstream copy" repo
git fetch upstream-copy main
git subtree pull --prefix helm/loki-app upstream-copy main --squash
  • if the subtree is tracking a subdir of "upstream copy":
git fetch upstream-copy main  # fetch the most recent state from "upstream copy/main"
git checkout upstream-copy/main  # it's OK to be in detached head, we won't change anything
git subtree split -P charts/loki-distributed -b temp-split-branch
git checkout master
git subtree merge --squash -P helm/loki temp-split-branch
git push 
git branch -D temp-split-branch

I want to send non-urgent patch for upstream

Do this if you want to submit a patch for "upstream", but you also want to wait it until it is accepted by upstream (so, you'll get your patch applied and then get it from "upstream" someday):

  • go to "upstream copy", update remote "upstream" and fetch changes into the "upstream-main" branch
  • create a branch "my-feature" from "upstream-main"
  • when ready, create a PR for "upstream"
  • when PR is merged, remove local "my-feature" branch and update our dependencies as in normal upstream update

I want to send urgent patch for upstream and use it already

Do this if you want to submit a patch for "upstream" and you need to use it right away, without waiting for being accepted by upstream:

  • go to "upstream copy", update remote "upstream" and fetch changes into the "upstream-main" branch
  • create a branch "my-feature" from "upstream-main"
  • when ready, create a PR (PR1) for "upstream"
  • create another PR (PR2) to merge "my-feature" into "main"
  • when PR2 is merged, update "chart repo" dependency on "upstream-copy/master" as in point 2 in normal upstream update
  • when PR1 is merged, remove local "my-feature" branch and update our dependencies as in normal upstream update

I want to make changes that I don't want to be ever sent to upstream

Do this if you want to make any Giant Swarm specific changes to the chart. We have two options about where to do that and it's up to you to think where it makes the most sense.

  1. In the "chart repo" - this should be your default.
  • just do it - you can commit and change anything you want in the "subtree" catalog and your changes won't be lost when you update it.
  1. In the "upstream copy" repo - makes sense for cases where multiple charts include some shared sub-chart and you want to patch it.
  • go to "upstream copy", checkout and update "main" branch
  • create a branch "my-feature" from "main"
  • when ready, create a PR from "my-feature" to "main"
  • when PR is merged, update "chart repo" dependency on "upstream-copy/master" as in point 2 in normal upstream update

I want to switch from another way of tracking upstream to the git-subtree way

In general, we have two options here:

  1. Git-supported. It works like this: we start by figuring our a commit (tag, branch, anything) in our current repo that was an exact copy of a known upstream version. Let's say this is reperesented by the vX.Y.Z tag. Now, I can save a diff between that clean state (a state of my repo when I got it from the "upstream" but before I applied any custom changes) and my current most recent state. The result should include everything we've changed since vX.Y.Z comparing to upstream. Now we remove the code from our repo, then include it again in the exactly same vX.Y.Z version, but this time using the git-subtree command. Then, we apply our patch file on the subtree and commit it. From now on, we can do any update as described above.

    Example: I want to switch my grafana-app repo to use git subtree from "upstream copy". I know that my repo in the commit 1111111 has the same code as the "upstream" repo had in the grafana-6.1.3 tag. We also want to do the migration in separate branch switch-to-subtree to be able to create a valid PR for the change and not work on the master directly.

    git checkout -b switch-to-subtree
git diff 1111111 -- helm/grafana-app > chart.diff
git remove -r helm/grafana-app
git commit -am "chart code deleted"
git checkout grafana-6.1.3
git subtree split -P charts/grafana -b temp-split-branch
git checkout switch-to-subtree
git subtree add --squash -P helm/grafana-app temp-split-branch # switched to subtree
git apply chart.diff # applied any custom changes
git commit -am "applied custom changes"
# you're ready continue with updating to the current state

  2. Manual way. We copy our current state somewhere (outside the current git tree), then we remove all the code we want to get from "upstream" or "upstream-copy". We add the code back using git subtree. Then we manually go over our backup copy and apply any chnages needed by editing the code. Then we commit the changes. From now on, we can do any update as described above.

    Example:

    git checkout -b switch-to-subtree
cp -a helm/grafana-app /tmp
git remove -r helm/grafana-app
git commit -am "chart code deleted"
git checkout grafana-7.1.0 # a version I want to update to
git subtree split -P charts/grafana -b temp-split-branch
git checkout switch-to-subtree
git subtree add --squash -P helm/grafana-app temp-split-branch # switched to subtree
# the hard part: compare what you have in /tmp/grafana-app with the helm/grafana-app and apply
# all the missing changes
git commit -am "applied custom changes"
# you're ready continue with updating to the current state