Skip to content

Latest commit

 

History

History
68 lines (46 loc) · 1.94 KB

INSTALL-FEDORA-CENTOS.md

File metadata and controls

68 lines (46 loc) · 1.94 KB
Raw

Installation on stock Fedora

The following are instructions for setting up a system starting from a stock system images.

These instructions were tested on a 64-bit systems from https://github.com/opscode/bento, and using the Junos PyEZ library version 2.1.0.

Operating Systems

  • Fedora 25
  • Fedora 24
  • CentOS 7.3
  • CentOS 6.8

Step 1: Install Python and PIP

For Python 2.x:
For Fedora:
    sudo yum install python-pip python-devel
For CentOS:
    sudo yum install python-devel
    wget https://bootstrap.pypa.io/get-pip.py -O - | sudo python
For Python 3.x:
For Fedora:
    sudo yum install python3-devel
For CentOS:
    (Python 3 packages for CentOS are not provided.)

Step 1: Install packages for Junos PyEZ

sudo yum install libxml2-devel libxslt-devel gcc openssl-devel libffi-devel redhat-rpm-config

Step 2: Install Junos PyEZ

For Python 2.x:
    sudo pip install junos-eznc
For Python 3.x:
    sudo pip3 install junos-eznc

Step 3: Verify

Once you've completed the above step, you should be able to create a Device instance, connect to a Junos system, and display the "facts", as illustrated in the README.md file.

Enjoy!

Installing from GitHub

Development code can be installed directly from GitHub based on any branch, commit, or tag.

Steps 1 -3 are still required.

Alternate Step 4: Install Junos PyEZ from GitHub

Step 4a: Install Git from OS packages

sudo yum install git

Step 4b: Install Junos PyEZ from GitHub

For Python 2.x:
    sudo pip install git+https://github.com/Juniper/py-junos-eznc.git
    or
    sudo pip install git+https://github.com/Juniper/py-junos-eznc.git@<branch,tag,commit>
For Python 3.x:
    sudo pip3 install git+https://github.com/Juniper/py-junos-eznc.git
    or
    sudo pip3 install git+https://github.com/Juniper/py-junos-eznc.git@<branch,tag,commit>