From a6521b8521f56f39c3aa5054bf04307190de9035 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E3=83=95=E3=82=A3=E3=83=AB=E3=82=BF=E3=83=BC=E3=83=9A?= =?UTF-8?q?=E3=83=BC=E3=83=91=E3=83=BC?= <76888457+filterpaper@users.noreply.github.com> Date: Fri, 17 Nov 2023 01:48:24 +0800 Subject: [PATCH] [Doc] Improve converter references (#21801) --- docs/feature_converters.md | 41 +++++++++++++------------------------- 1 file changed, 14 insertions(+), 27 deletions(-) diff --git a/docs/feature_converters.md b/docs/feature_converters.md index b1abfa373ad8..11bdbed576b5 100644 --- a/docs/feature_converters.md +++ b/docs/feature_converters.md @@ -1,12 +1,10 @@ # Converters -Since many drop-in replacement controllers now exist, we've done our best to make them easy to use in existing designs. +This page documents the automated process for converting keyboards to use drop-in replacement controllers. This process is designed to be easy to use and can be completed in a few simple steps. -This page documents the handy automated process for converting keyboards. +## Supported Converters -### Supported Converters - -Currently the following converters are available: +The following converters are available at this time: | From | To | |------------|-------------------| @@ -28,14 +26,10 @@ Currently the following converters are available: | `elite_c` | `helios` | | `elite_c` | `liatris` | -See below for more in depth information on each converter. ## Overview -Each converter category is broken down by its declared `pin compatibility`. -This ensures that only valid combinations are attempted. - -You can generate the firmware by appending `-e CONVERT_TO=` to your compile/flash command. For example: +Each converter category is broken down by its declared `pin compatibility`. This ensures that only valid combinations are attempted. You can generate the firmware by appending `-e CONVERT_TO=` to your compile/flash command. For example: ```sh qmk flash -c -kb keebio/bdn9/rev1 -km default -e CONVERT_TO=proton_c @@ -59,14 +53,12 @@ Once a converter is enabled, it exposes the `CONVERT_TO_` flag ### Pin Compatibility -To ensure compatibility, provide validation, and power future workflows, a keyboard should declare its `pin compatibility`. For legacy reasons, this is currently assumed to be `promicro`. - -Currently the following pin compatibility interfaces are defined: +To ensure compatibility, provide validation, and enable future workflows, a keyboard should declare its `pin compatibility`. For legacy reasons, this is currently assumed to be `promicro`. The following pin compatibility interfaces are currently defined: -| Pinout | Notes | -|------------|-----------------------------------| -| `promicro` | Includes RX/TX LEDs | -| `elite_c` | Includes bottom row pins, no LEDs | +| Pin Compatibility | Notes | +|-------------------|-----------------------------------| +| `promicro` | Includes RX/TX LEDs | +| `elite_c` | Includes bottom row pins, no LEDs | To declare the base for conversions, add this line to your keyboard's `rules.mk`: @@ -140,7 +132,7 @@ The following defaults are based on what has been implemented for [RP2040](platf ### SparkFun Pro Micro - RP2040, Blok, Bit-C PRO and Michi :id=promicro_rp2040 -Currently identical to [Adafruit KB2040](#kb2040). +Feature set is identical to [Adafruit KB2040](#kb2040). ### STeMCell :id=stemcell @@ -150,9 +142,7 @@ There are two versions of STeMCell available, with different pinouts: - v2.0.0 (pre-release v1.0.1, v1.0.2) Default official firmware only supports v2.0.0 STeMCell. -STeMCell has support to swap UART and I2C pins, to enable single-wire uart communication in STM chips. - -The following additional flags has to be used while compiling, based on the pin used for split communication. +STeMCell has support to swap UART and I2C pins to enable single-wire uart communication in STM chips. The following additional flags has to be used while compiling, based on the pin used for split communication: | Split Pin | Compile flags | |-----------|---------------| @@ -173,11 +163,8 @@ The Bonsai C4 only has one on-board LED (B2), and by default, both the Pro Micro ### RP2040 Community Edition - Elite-Pi, Helios, and Liatris :id=rp2040_ce -Feature set currently identical to [Adafruit KB2040](#kb2040). - -Enables VBUS detection by default for superior split keyboard support. +Feature set is identical to [Adafruit KB2040](#kb2040). VBUS detection is enabled by default for superior split keyboard support. For more information, refer to the [Community Edition pinout](platformdev_rp2040.md#rp2040_ce) docs. -For more information, refer to the [RP2040 Community Edition](platformdev_rp2040.md#rp2040_ce) docs. ## Elite-C @@ -202,8 +189,8 @@ Converter summary: ### STeMCell :id=stemcell_elite -Currently identical to [STeMCell](#stemcell) with support for the additional bottom row of pins. +Identical to [Pro Micro - STeMCell](#stemcell) with support for the additional bottom row of pins. ### RP2040 Community Edition :id=rp2040_ce_elite -Currently identical to [RP2040 Community Edition](#rp2040_ce), with support for the additional bottom row of pins. +Identical to [Pro Micro - RP2040 Community Edition](#rp2040_ce) with support for the additional bottom row of pins.