diff --git a/data/mappings/info_config.hjson b/data/mappings/info_config.hjson
index e53d90da39b3..56d6216c421b 100644
--- a/data/mappings/info_config.hjson
+++ b/data/mappings/info_config.hjson
@@ -117,6 +117,7 @@
"RGBLIGHT_LAYER_BLINK": {"info_key": "rgblight.layers.blink", "value_type": "bool"},
"RGBLIGHT_LAYERS": {"info_key": "rgblight.layers.enabled", "value_type": "bool"},
"RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF": {"info_key": "rgblight.layers.override_rgb", "value_type": "bool"},
+ "RGBLIGHT_LED_MAP": {"info_key": "rgblight.led_map", "value_type": "array.int"},
"RGBLIGHT_LIMIT_VAL": {"info_key": "rgblight.max_brightness", "value_type": "int"},
"RGBLIGHT_MAX_LAYERS": {"info_key": "rgblight.layers.max", "value_type": "int"},
"RGBLIGHT_SAT_STEP": {"info_key": "rgblight.saturation_steps", "value_type": "int"},
diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema
index ba4a7eec5570..a6213d6a7cdf 100644
--- a/data/schemas/keyboard.jsonschema
+++ b/data/schemas/keyboard.jsonschema
@@ -491,6 +491,11 @@
}
},
"led_count": {"$ref": "qmk.definitions.v1#/unsigned_int"},
+ "led_map": {
+ "type": "array",
+ "minItems": 2,
+ "items": {"$ref": "qmk.definitions.v1#/unsigned_int"}
+ },
"max_brightness": {"$ref": "qmk.definitions.v1#/unsigned_int_8"},
"pin": {
"$ref": "qmk.definitions.v1#/mcu_pin",
diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md
index 5131658ae158..7deda1f8d517 100644
--- a/docs/feature_rgblight.md
+++ b/docs/feature_rgblight.md
@@ -524,37 +524,6 @@ By defining `RGBLIGHT_LED_MAP` as in the example below, you can specify the LED
```
-For keyboards that use the RGB LEDs as a backlight for each key, you can also define it as in the example below.
-
-```c
-// config.h
-
-#define RGBLED_NUM 30
-
-/* RGB LED Conversion macro from physical array to electric array */
-#define LED_LAYOUT( \
- L00, L01, L02, L03, L04, L05, \
- L10, L11, L12, L13, L14, L15, \
- L20, L21, L22, L23, L24, L25, \
- L30, L31, L32, L33, L34, L35, \
- L40, L41, L42, L43, L44, L45 ) \
- { \
- L05, L04, L03, L02, L01, L00, \
- L10, L11, L12, L13, L14, L15, \
- L25, L24, L23, L22, L21, L20, \
- L30, L31, L32, L33, L34, L35, \
- L46, L45, L44, L43, L42, L41 \
- }
-
-/* RGB LED logical order map */
-/* Top->Bottom, Right->Left */
-#define RGBLIGHT_LED_MAP LED_LAYOUT( \
- 25, 20, 15, 10, 5, 0, \
- 26, 21, 16, 11, 6, 1, \
- 27, 22, 17, 12, 7, 2, \
- 28, 23, 18, 13, 8, 3, \
- 29, 24, 19, 14, 9, 4 )
-
```
## Clipping Range
diff --git a/keyboards/25keys/zinc/rev1/post_config.h b/keyboards/25keys/zinc/rev1/post_config.h
index 15857d3b0b30..8588d07f025d 100644
--- a/keyboards/25keys/zinc/rev1/post_config.h
+++ b/keyboards/25keys/zinc/rev1/post_config.h
@@ -34,7 +34,6 @@ along with this program. If not, see .
#ifdef RGBLED_CONT
#define RGBLED_NUM 60
#define RGBLED_SPLIT { 30, 30 }
-// #define RGBLIGHT_LED_MAP {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29}
#else
#define RGBLED_NUM 30
#endif
diff --git a/keyboards/25keys/zinc/reva/post_config.h b/keyboards/25keys/zinc/reva/post_config.h
index 15857d3b0b30..8588d07f025d 100644
--- a/keyboards/25keys/zinc/reva/post_config.h
+++ b/keyboards/25keys/zinc/reva/post_config.h
@@ -34,7 +34,6 @@ along with this program. If not, see .
#ifdef RGBLED_CONT
#define RGBLED_NUM 60
#define RGBLED_SPLIT { 30, 30 }
-// #define RGBLIGHT_LED_MAP {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29}
#else
#define RGBLED_NUM 30
#endif
diff --git a/keyboards/avalanche/v4/config.h b/keyboards/avalanche/v4/config.h
index d60748d9bcdd..37d139eaad6f 100644
--- a/keyboards/avalanche/v4/config.h
+++ b/keyboards/avalanche/v4/config.h
@@ -21,29 +21,6 @@
# define RGBLIGHT_EFFECT_KNIGHT
# define RGBLIGHT_EFFECT_SNAKE
# define RGBLIGHT_EFFECT_CHRISTMAS
-
-
-// RGB LED Conversion macro from physical array to electric array. This results in better looking animated effects.
-# define LED_LAYOUT( \
- /* LED matrix */ \
- L01, L02, L03, L04, L05, L06, L011, L012, L013, L014, L015, L016, \
- L11, L12, L13, L14, L15, L16, L111, L112, L113, L114, L115, L116, \
- L20, L21, L22, L23, L24, L25, L26, L211, L212, L213, L214, L215, L216, L217, \
- L31, L32, L33, L34, L35, L36, L37, L38, L39, L310, L311, L312, L313, L314, L315, L316, \
- L44, L45, L46, L47, L48, L49, L410, L411, L412, L413 )\
- { \
- /* left half - electrical wiring order */ \
- L47,L48,L38,L37,L36,L26,L16,L06,L05,L15,L25,L35,L46,L45,L34,L24,L14,L04,L03,L13,L23,L33,L44,L32,L22,L12,L02,L01,L11,L21,L31,L20, \
- /* right half - electrical wiring order */ \
- L410,L49,L39,L310,L311,L211,L111,L011,L012,L112,L212,L312,L411,L412,L313,L213,L113,L013,L014,L114,L214,L314,L413,L315,L215,L115,L015,L016,L116,L216,L316,L217 \
- }
-# define RGBLIGHT_LED_MAP LED_LAYOUT( \
- /* animation order. */ \
- 4, 8, 12, 17, 22, 27, 40, 45, 50, 54, 58, 62, \
- 3, 7, 11, 16, 21, 26, 39, 44, 49, 53, 57, 61, \
- 0, 2, 6, 10, 15, 20, 25, 38, 43, 48, 52, 56, 60, 63, \
- 1, 5, 9, 14, 19, 24, 29, 31, 33, 35, 37, 42, 47, 51, 55, 59, \
- 13, 18, 23, 28, 30, 32, 34, 36, 41, 46 )
#endif
#ifdef OLED_ENABLE
diff --git a/keyboards/avalanche/v4/info.json b/keyboards/avalanche/v4/info.json
index 399ebb82a344..10591c3129e2 100644
--- a/keyboards/avalanche/v4/info.json
+++ b/keyboards/avalanche/v4/info.json
@@ -26,6 +26,7 @@
},
"rgblight": {
"max_brightness": 100,
+ "led_map": [28, 30, 31, 29, 24, 25, 26, 27, 22, 21, 20, 19, 23, 18, 14, 15, 16, 17, 12, 11, 10, 9, 13, 5, 6, 7, 8, 4, 3, 2, 1, 0, 34, 32, 33, 35, 37, 38, 39, 40, 45, 44, 43, 42, 36, 41, 47, 48, 49, 50, 54, 53, 52, 51, 46, 55, 56, 57, 58, 62, 61, 60, 59, 63],
"split_count": [32, 32]
},
"processor": "atmega32u4",
diff --git a/keyboards/barleycorn_smd/config.h b/keyboards/barleycorn_smd/config.h
index 167c3b5c87c4..52681e9a0b06 100644
--- a/keyboards/barleycorn_smd/config.h
+++ b/keyboards/barleycorn_smd/config.h
@@ -49,7 +49,6 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
-#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 5 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/barleycorn_smd/info.json b/keyboards/barleycorn_smd/info.json
index 0f759e5f4d53..471369812c2d 100644
--- a/keyboards/barleycorn_smd/info.json
+++ b/keyboards/barleycorn_smd/info.json
@@ -12,6 +12,9 @@
"caps_lock": "B2",
"num_lock": "B3"
},
+ "rgblight": {
+ "led_map": [0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, 12, 13, 14, 5]
+ },
"ws2812": {
"pin": "E6"
},
diff --git a/keyboards/chlx/str_merro60/config.h b/keyboards/chlx/str_merro60/config.h
index 62b31cf95bf4..a16b45e8d7cd 100644
--- a/keyboards/chlx/str_merro60/config.h
+++ b/keyboards/chlx/str_merro60/config.h
@@ -29,7 +29,6 @@ along with this program. If not, see .
# define RGBLIGHT_EFFECT_TWINKLE
# define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL + 5
# define RGBLED_NUM 12
-# define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/contender/config.h b/keyboards/contender/config.h
index 971253f396aa..ef0a28061108 100644
--- a/keyboards/contender/config.h
+++ b/keyboards/contender/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see .
#pragma once
#define RGBLED_NUM 33
-#define RGBLIGHT_LED_MAP { \
- 0, 1, 2, 3, \
- 7, 6, 5, 4, \
- 8, 9, 10, 11, \
- 15, 14, 13, 12, \
- 16, 17, 18, 19, \
- 22, 21, 20, \
- 25, 24, 23, 26, 27, 28, 29, 30, 31, 32 }
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/contender/info.json b/keyboards/contender/info.json
index 8a81ae164d7a..3eaaf23cd41d 100644
--- a/keyboards/contender/info.json
+++ b/keyboards/contender/info.json
@@ -12,7 +12,8 @@
"pin": "C6"
},
"rgblight": {
- "max_brightness": 32
+ "max_brightness": 32,
+ "led_map": [0, 1, 2, 3, 7, 6, 5, 4, 8, 9, 10, 11, 15, 14, 13, 12, 16, 17, 18, 19, 22, 21, 20, 25, 24, 23, 26, 27, 28, 29, 30, 31, 32]
},
"matrix_pins": {
"cols": ["C7", "D6", "B3", "B0", "B1"],
diff --git a/keyboards/drop/thekey/v2/config.h b/keyboards/drop/thekey/v2/config.h
deleted file mode 100644
index ca6944c2c9a0..000000000000
--- a/keyboards/drop/thekey/v2/config.h
+++ /dev/null
@@ -1,5 +0,0 @@
-// Copyright 2023 Massdrop, Inc.
-// SPDX-License-Identifier: GPL-2.0-or-later
-#pragma once
-
-#define RGBLIGHT_LED_MAP {4, 0, 1, 2, 3}
diff --git a/keyboards/drop/thekey/v2/info.json b/keyboards/drop/thekey/v2/info.json
index 7870599fe181..ced9901bea0b 100644
--- a/keyboards/drop/thekey/v2/info.json
+++ b/keyboards/drop/thekey/v2/info.json
@@ -25,6 +25,7 @@
"diode_direction": "ROW2COL",
"rgblight": {
"led_count": 5,
+ "led_map": [4, 0, 1, 2, 3],
"sleep": true,
"animations": {
"alternating": true,
diff --git a/keyboards/ergodox_ez/ergodox_ez.h b/keyboards/ergodox_ez/ergodox_ez.h
index 0c23a1296901..befc1146177e 100644
--- a/keyboards/ergodox_ez/ergodox_ez.h
+++ b/keyboards/ergodox_ez/ergodox_ez.h
@@ -139,25 +139,3 @@ typedef union {
} keyboard_config_t;
extern keyboard_config_t keyboard_config;
-
-/* ---- LEFT HAND ---- ---- RIGHT HAND ---- */
-#define LED_LAYOUT_ergodox_pretty( \
- L01,L02,L03,L04,L05, R01,R02,R03,R04,R05, \
- L11,L12,L13,L14,L15, R11,R12,R13,R14,R15, \
- L21,L22,L23,L24,L25, R21,R22,R23,R24,R25, \
- L31,L32,L33,L34,L35, R31,R32,R33,R34,R35, \
- L41,L42,L43,L44, R42,R43,R44,R45 ) \
- \
- /* matrix positions */ \
- { R01, R02, R03, R04, R05, \
- R11, R12, R13, R14, R15, \
- R21, R22, R23, R24, R25, \
- R31, R32, R33, R34, R35, \
- R42, R43, R44, R45, \
- \
- L05, L04, L03, L02, L01, \
- L15, L14, L13, L12, L11, \
- L25, L24, L23, L22, L21, \
- L35, L34, L33, L32, L31, \
- L44, L43, L42, L41 \
- }
diff --git a/keyboards/flxlb/zplit/config.h b/keyboards/flxlb/zplit/config.h
index 9c1d35d13641..ad1612280cac 100644
--- a/keyboards/flxlb/zplit/config.h
+++ b/keyboards/flxlb/zplit/config.h
@@ -30,7 +30,6 @@ along with this program. If not, see .
/* ws2812 RGB LED */
#define RGBLED_NUM 16
-#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8}
#define RGBLIGHT_SPLIT
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/flxlb/zplit/info.json b/keyboards/flxlb/zplit/info.json
index dbd075a2e482..fb30fe2ab752 100644
--- a/keyboards/flxlb/zplit/info.json
+++ b/keyboards/flxlb/zplit/info.json
@@ -19,6 +19,7 @@
]
},
"rgblight": {
+ "led_map": [0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8],
"split_count": [8, 8]
},
"ws2812": {
diff --git a/keyboards/giabalanai/config.h b/keyboards/giabalanai/config.h
index fda301537fb9..1471806690bf 100644
--- a/keyboards/giabalanai/config.h
+++ b/keyboards/giabalanai/config.h
@@ -41,28 +41,6 @@ along with this program. If not, see .
// By default, LEDs of the buttons which are pressed turn on.
// # define RGBLIGHT_EFFECT_TWINKLE
// # define RGBLIGHT_EFFECT_KNIGHT
-
-
-// RGBLIGHT LED MAP
-// Right 1st row (12 LEDs)
-// ENCODER
-// Right 2nd .. 5th row(13, 12, 13, 12 LEDs)
-// Left 1st .. 5th row (12 LEDs x 5 rows)
-
-# define RGBLIGHT_LED_MAP { \
- 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, \
- 97, \
- 84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, \
- 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, \
- 110, 109, 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, \
- 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, \
- \
- 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, \
- 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, \
- 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, \
- 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
- 59, 58, 57, 56, 55, 54, 53, 52, 51, 50, 49, 48 \
- }
#endif
#ifdef RGB_MATRIX_ENABLE
diff --git a/keyboards/giabalanai/info.json b/keyboards/giabalanai/info.json
index 7c2fa72047e7..7274505f9b00 100644
--- a/keyboards/giabalanai/info.json
+++ b/keyboards/giabalanai/info.json
@@ -12,7 +12,8 @@
"driver": "WS2812"
},
"rgblight": {
- "max_brightness": 80
+ "max_brightness": 80,
+ "led_map": [60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 97, 84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 110, 109, 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 59, 58, 57, 56, 55, 54, 53, 52, 51, 50, 49, 48]
},
"matrix_pins": {
"cols": ["B1", "F7", "F6", "F5", "F4", "B3", "B2", "B6", "D0", "D1"],
diff --git a/keyboards/handwired/freoduo/config.h b/keyboards/handwired/freoduo/config.h
index e4045a37905a..22da5b95eb36 100644
--- a/keyboards/handwired/freoduo/config.h
+++ b/keyboards/handwired/freoduo/config.h
@@ -21,8 +21,6 @@ along with this program. If not, see .
#if !defined(RGBLED_NUM)
# define RGBLED_NUM 30
# define RGBLIGHT_SPLIT
-// Switch RGB sides with LED MAP.
-# define RGBLIGHT_LED_MAP { 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30}
# define RGBLIGHT_LAYERS
#endif
#define RGBLIGHT_EFFECT_BREATHING
diff --git a/keyboards/handwired/freoduo/info.json b/keyboards/handwired/freoduo/info.json
index a4d6144cf95d..347b832a401c 100644
--- a/keyboards/handwired/freoduo/info.json
+++ b/keyboards/handwired/freoduo/info.json
@@ -17,6 +17,7 @@
"soft_serial_pin": "D0"
},
"rgblight": {
+ "led_map": [15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30],
"split_count": [16, 14]
},
"ws2812": {
diff --git a/keyboards/handwired/macroboard/config.h b/keyboards/handwired/macroboard/config.h
index d20625da0858..e041e181cade 100644
--- a/keyboards/handwired/macroboard/config.h
+++ b/keyboards/handwired/macroboard/config.h
@@ -23,7 +23,6 @@ along with this program. If not, see .
#define WS2812_DMA_STREAM STM32_DMA1_STREAM6 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_PWM_TARGET_PERIOD 800000
-#define RGBLIGHT_LED_MAP { 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 23, 21, 19, 17, 15, 13, 11, 9, 7, 5, 3, 1 }
# define RGBLED_NUM 24
# define RGBLIGHT_HUE_STEP 8
diff --git a/keyboards/handwired/macroboard/info.json b/keyboards/handwired/macroboard/info.json
index b82cee4fb523..ba597d39f62c 100644
--- a/keyboards/handwired/macroboard/info.json
+++ b/keyboards/handwired/macroboard/info.json
@@ -8,6 +8,9 @@
"pid": "0x2137",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "led_map": [0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 23, 21, 19, 17, 15, 13, 11, 9, 7, 5, 3, 1]
+ },
"ws2812": {
"pin": "B9"
},
diff --git a/keyboards/jones/v03_1/config.h b/keyboards/jones/v03_1/config.h
index b3eb44a1566a..7625c2cdb4d2 100644
--- a/keyboards/jones/v03_1/config.h
+++ b/keyboards/jones/v03_1/config.h
@@ -49,7 +49,6 @@ along with this program. If not, see .
#endif
#define RGBLED_NUM 14 // Left(4) + Right(2) + Under(8)
- #define RGBLIGHT_LED_MAP {0,1,2,3,13,12,4,5,6,7,8,9,10,11} // Left --> Right --> Under
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/jones/v03_1/info.json b/keyboards/jones/v03_1/info.json
index d0fec4e57167..fa5e1bf38528 100644
--- a/keyboards/jones/v03_1/info.json
+++ b/keyboards/jones/v03_1/info.json
@@ -14,6 +14,9 @@
{"pin_a": "B3", "pin_b": "B2"}
]
},
+ "rgblight": {
+ "led_map": [0, 1, 2, 3, 13, 12, 4, 5, 6, 7, 8, 9, 10, 11]
+ },
"ws2812": {
"pin": "F0"
},
diff --git a/keyboards/keebio/foldkb/rev1/config.h b/keyboards/keebio/foldkb/rev1/config.h
index efdd195b5d1a..917475fab75b 100644
--- a/keyboards/keebio/foldkb/rev1/config.h
+++ b/keyboards/keebio/foldkb/rev1/config.h
@@ -35,5 +35,4 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 16 // Number of LEDs
-#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 12, 13, 14, 15, 4, 5, 6, 7, 8, 9, 10, 11 }
#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
diff --git a/keyboards/keebio/foldkb/rev1/info.json b/keyboards/keebio/foldkb/rev1/info.json
index 705bd7cc8a6d..467aaaa4b64d 100644
--- a/keyboards/keebio/foldkb/rev1/info.json
+++ b/keyboards/keebio/foldkb/rev1/info.json
@@ -25,6 +25,7 @@
"soft_serial_pin": "D0"
},
"rgblight": {
+ "led_map": [0, 1, 2, 3, 12, 13, 14, 15, 4, 5, 6, 7, 8, 9, 10, 11],
"split_count": [8, 8]
},
"ws2812": {
diff --git a/keyboards/keebio/kbo5000/rev1/config.h b/keyboards/keebio/kbo5000/rev1/config.h
index c22aff38be5c..d8a0161dbaa1 100644
--- a/keyboards/keebio/kbo5000/rev1/config.h
+++ b/keyboards/keebio/kbo5000/rev1/config.h
@@ -39,4 +39,3 @@ along with this program. If not, see .
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 16 // Number of LEDs
-#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 }
diff --git a/keyboards/keebio/kbo5000/rev1/info.json b/keyboards/keebio/kbo5000/rev1/info.json
index e1b4d90492f8..78bbb01357e4 100644
--- a/keyboards/keebio/kbo5000/rev1/info.json
+++ b/keyboards/keebio/kbo5000/rev1/info.json
@@ -22,6 +22,7 @@
"pin": "B5"
},
"rgblight": {
+ "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8],
"split_count": [8, 8]
},
"ws2812": {
diff --git a/keyboards/keebio/quefrency/rev2/config.h b/keyboards/keebio/quefrency/rev2/config.h
index 20f625af304a..29c55072ea53 100644
--- a/keyboards/keebio/quefrency/rev2/config.h
+++ b/keyboards/keebio/quefrency/rev2/config.h
@@ -24,7 +24,6 @@ along with this program. If not, see .
/* ws2812 RGB LED */
#define RGBLED_NUM 16 // Number of LEDs
-#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 }
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/keebio/quefrency/rev2/info.json b/keyboards/keebio/quefrency/rev2/info.json
index d9bbab9795df..d1871c887bd5 100644
--- a/keyboards/keebio/quefrency/rev2/info.json
+++ b/keyboards/keebio/quefrency/rev2/info.json
@@ -22,6 +22,7 @@
"pin": "B5"
},
"rgblight": {
+ "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8],
"split_count": [8, 8]
},
"ws2812": {
diff --git a/keyboards/keebio/quefrency/rev3/config.h b/keyboards/keebio/quefrency/rev3/config.h
index 20f625af304a..29c55072ea53 100644
--- a/keyboards/keebio/quefrency/rev3/config.h
+++ b/keyboards/keebio/quefrency/rev3/config.h
@@ -24,7 +24,6 @@ along with this program. If not, see .
/* ws2812 RGB LED */
#define RGBLED_NUM 16 // Number of LEDs
-#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 }
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/keebio/quefrency/rev3/info.json b/keyboards/keebio/quefrency/rev3/info.json
index 4f14a0f6a829..93dd6774b57d 100644
--- a/keyboards/keebio/quefrency/rev3/info.json
+++ b/keyboards/keebio/quefrency/rev3/info.json
@@ -22,6 +22,7 @@
"pin": "B5"
},
"rgblight": {
+ "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8],
"split_count": [8, 8]
},
"ws2812": {
diff --git a/keyboards/keebio/quefrency/rev4/config.h b/keyboards/keebio/quefrency/rev4/config.h
index da173dde3ee5..84e9d85dd465 100644
--- a/keyboards/keebio/quefrency/rev4/config.h
+++ b/keyboards/keebio/quefrency/rev4/config.h
@@ -25,7 +25,6 @@ along with this program. If not, see .
/* ws2812 RGB LED */
#define RGBLED_NUM 16 // Number of LEDs
-#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 }
#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/keebio/quefrency/rev4/info.json b/keyboards/keebio/quefrency/rev4/info.json
index 64a2361f81b0..53b30b5d7048 100644
--- a/keyboards/keebio/quefrency/rev4/info.json
+++ b/keyboards/keebio/quefrency/rev4/info.json
@@ -19,6 +19,7 @@
]
},
"rgblight": {
+ "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8],
"split_count": [8, 8]
},
"ws2812": {
diff --git a/keyboards/keebio/quefrency/rev5/config.h b/keyboards/keebio/quefrency/rev5/config.h
index da173dde3ee5..84e9d85dd465 100644
--- a/keyboards/keebio/quefrency/rev5/config.h
+++ b/keyboards/keebio/quefrency/rev5/config.h
@@ -25,7 +25,6 @@ along with this program. If not, see .
/* ws2812 RGB LED */
#define RGBLED_NUM 16 // Number of LEDs
-#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 }
#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/keebio/quefrency/rev5/info.json b/keyboards/keebio/quefrency/rev5/info.json
index 3d60d7904876..15aeef9426b0 100644
--- a/keyboards/keebio/quefrency/rev5/info.json
+++ b/keyboards/keebio/quefrency/rev5/info.json
@@ -19,6 +19,7 @@
]
},
"rgblight": {
+ "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8],
"split_count": [8, 8]
},
"ws2812": {
diff --git a/keyboards/keebio/sinc/rev1/config.h b/keyboards/keebio/sinc/rev1/config.h
index c394777a8f82..8894354d4313 100644
--- a/keyboards/keebio/sinc/rev1/config.h
+++ b/keyboards/keebio/sinc/rev1/config.h
@@ -26,8 +26,6 @@ along with this program. If not, see .
/* Synchronize Caps Lock LED across halves */
#define SPLIT_LED_STATE_ENABLE
-/* ws2812 RGB LED */
-#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 }
#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
diff --git a/keyboards/keebio/sinc/rev1/info.json b/keyboards/keebio/sinc/rev1/info.json
index d9b09568bdad..5ddb54ee6038 100644
--- a/keyboards/keebio/sinc/rev1/info.json
+++ b/keyboards/keebio/sinc/rev1/info.json
@@ -49,6 +49,7 @@
},
"rgblight": {
"led_count": 16,
+ "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8],
"split_count": [8, 8],
"animations": {
"alternating": true,
diff --git a/keyboards/keebio/sinc/rev2/config.h b/keyboards/keebio/sinc/rev2/config.h
index c394777a8f82..8894354d4313 100644
--- a/keyboards/keebio/sinc/rev2/config.h
+++ b/keyboards/keebio/sinc/rev2/config.h
@@ -26,8 +26,6 @@ along with this program. If not, see .
/* Synchronize Caps Lock LED across halves */
#define SPLIT_LED_STATE_ENABLE
-/* ws2812 RGB LED */
-#define RGBLIGHT_LED_MAP { 1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8 }
#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
diff --git a/keyboards/keebio/sinc/rev2/info.json b/keyboards/keebio/sinc/rev2/info.json
index d9372d9e9479..0c86727abeda 100644
--- a/keyboards/keebio/sinc/rev2/info.json
+++ b/keyboards/keebio/sinc/rev2/info.json
@@ -49,6 +49,7 @@
},
"rgblight": {
"led_count": 16,
+ "led_map": [1, 2, 3, 12, 13, 14, 15, 0, 7, 6, 5, 4, 11, 10, 9, 8],
"split_count": [8, 8],
"animations": {
"alternating": true,
diff --git a/keyboards/matrix/cain_re/config.h b/keyboards/matrix/cain_re/config.h
index 017961460c49..df138027a601 100644
--- a/keyboards/matrix/cain_re/config.h
+++ b/keyboards/matrix/cain_re/config.h
@@ -36,7 +36,6 @@
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_SLEEP
-#define RGBLIGHT_LED_MAP { 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 1, 2, 3 }
#define CAPS_PIN D3
#define NUM_PIN F7
diff --git a/keyboards/matrix/cain_re/info.json b/keyboards/matrix/cain_re/info.json
index 5b89ed83ef78..f9af90c15e41 100644
--- a/keyboards/matrix/cain_re/info.json
+++ b/keyboards/matrix/cain_re/info.json
@@ -8,6 +8,9 @@
"pid": "0x0106",
"device_version": "0.0.1"
},
+ "rgblight": {
+ "led_map": [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 1, 2, 3]
+ },
"ws2812": {
"pin": "E6"
},
diff --git a/keyboards/moonlander/moonlander.h b/keyboards/moonlander/moonlander.h
index f68b60379c23..0e5282c511a6 100644
--- a/keyboards/moonlander/moonlander.h
+++ b/keyboards/moonlander/moonlander.h
@@ -34,37 +34,6 @@ extern bool mcp23018_leds[];
#define ML_LED_5(status) mcp23018_leds[1] = (bool)status
#define ML_LED_6(status) mcp23018_leds[2] = (bool)status
-
-// clang-format off
-#define LED_LAYOUT_moonlander( \
- l00, l01, l02, l03, l04, l05, l06, l60, l61, l62, l63, l64, l65, l66, \
- l10, l11, l12, l13, l14, l15, l16, l70, l71, l72, l73, l74, l75, l76, \
- l20, l21, l22, l23, l24, l25, l26, l80, l81, l82, l83, l84, l85, l86, \
- l30, l31, l32, l33, l34, l35, l91, l92, l93, l94, l95, l96, \
- l40, l41, l42, l43, l44, l53, lb3, la2, la3, la4, la5, la6, \
- l50, l51, l52, lb4, lb5, lb6 \
-) \
-{ \
- l00, l10, l20, l30, l40, \
- l01, l11, l21, l31, l41, \
- l02, l12, l22, l32, l42, \
- l03, l13, l23, l33, l43, \
- l04, l14, l24, l34, l44, \
- l05, l15, l25, l35, \
- l06, l16, l26, \
- l50, l51, l52, l53, \
-\
- l66, l76, l86, l96, la6, \
- l65, l75, l85, l95, la5, \
- l64, l74, l84, l94, la4, \
- l63, l73, l83, l93, la3, \
- l62, l72, l82, l92, la2, \
- l61, l71, l81, l91, \
- l60, l70, l80, \
- lb6, lb5, lb4, lb3 \
-}
-// clang-format on
-
enum planck_ez_keycodes {
TOGGLE_LAYER_COLOR = QK_KB_0,
LED_LEVEL,
diff --git a/keyboards/neito/config.h b/keyboards/neito/config.h
index ef9b51892005..fb5d1cd72ea5 100644
--- a/keyboards/neito/config.h
+++ b/keyboards/neito/config.h
@@ -30,7 +30,6 @@
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 11
-#define RGBLIGHT_LED_MAP { 4, 3, 2, 1, 0, 10, 9, 8, 7, 6, 5 }
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/neito/info.json b/keyboards/neito/info.json
index a226d236c315..dede656f17ab 100644
--- a/keyboards/neito/info.json
+++ b/keyboards/neito/info.json
@@ -30,7 +30,8 @@
"pin": "D5"
},
"rgblight": {
- "max_brightness": 200
+ "max_brightness": 200,
+ "led_map": [4, 3, 2, 1, 0, 10, 9, 8, 7, 6, 5]
},
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
diff --git a/keyboards/nullbitsco/snap/config.h b/keyboards/nullbitsco/snap/config.h
index cbc354a13a1b..1fbe05d9d570 100644
--- a/keyboards/nullbitsco/snap/config.h
+++ b/keyboards/nullbitsco/snap/config.h
@@ -59,7 +59,6 @@
/* Optional SMT LED pins */
#define RGBLED_NUM 10
-#define RGBLIGHT_LED_MAP { 8, 9, 0, 1, 2, 6, 7, 3, 4, 5 }
#define RGBLIGHT_SLEEP
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
diff --git a/keyboards/nullbitsco/snap/info.json b/keyboards/nullbitsco/snap/info.json
index fcb224d30ad9..6604b19fdbfc 100644
--- a/keyboards/nullbitsco/snap/info.json
+++ b/keyboards/nullbitsco/snap/info.json
@@ -8,6 +8,7 @@
"device_version": "0.0.1"
},
"rgblight": {
+ "led_map": [8, 9, 0, 1, 2, 6, 7, 3, 4, 5],
"split_count": [5, 5]
},
"ws2812": {
diff --git a/keyboards/obosob/arch_36/config.h b/keyboards/obosob/arch_36/config.h
index 3852baf5a7fa..e584bb045cef 100644
--- a/keyboards/obosob/arch_36/config.h
+++ b/keyboards/obosob/arch_36/config.h
@@ -19,8 +19,6 @@ along with this program. If not, see .
#ifdef RGBLIGHT_ENABLE
#define RGBLED_NUM 12
-#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, \
- 11, 10, 9, 8, 7, 6 }
#endif
#define OLED_DISPLAY_128X64
diff --git a/keyboards/obosob/arch_36/info.json b/keyboards/obosob/arch_36/info.json
index cffa4e8e4466..b888049bc511 100644
--- a/keyboards/obosob/arch_36/info.json
+++ b/keyboards/obosob/arch_36/info.json
@@ -17,6 +17,7 @@
"soft_serial_pin": "D2"
},
"rgblight": {
+ "led_map": [0, 1, 2, 3, 4, 5, 11, 10, 9, 8, 7, 6],
"split_count": [6, 6]
},
"ws2812": {
diff --git a/keyboards/ogre/ergo_single/config.h b/keyboards/ogre/ergo_single/config.h
index c6739d7f6657..690b44eb064e 100644
--- a/keyboards/ogre/ergo_single/config.h
+++ b/keyboards/ogre/ergo_single/config.h
@@ -18,7 +18,6 @@ along with this program. If not, see .
#pragma once
#define RGBLED_NUM 14
-#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 13, 12,11, 10, 9, 8, 7}
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/ogre/ergo_single/info.json b/keyboards/ogre/ergo_single/info.json
index 4a5b96b8add4..c51af75fe02e 100644
--- a/keyboards/ogre/ergo_single/info.json
+++ b/keyboards/ogre/ergo_single/info.json
@@ -13,6 +13,9 @@
"rows": ["D3", "D2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"]
},
"diode_direction": "COL2ROW",
+ "rgblight": {
+ "led_map": [0, 1, 2, 3, 4, 5, 6, 13, 12, 11, 10, 9, 8, 7]
+ },
"ws2812": {
"pin": "B6"
},
diff --git a/keyboards/ogre/ergo_split/config.h b/keyboards/ogre/ergo_split/config.h
index 20bff507def5..adff7abc3ebf 100644
--- a/keyboards/ogre/ergo_split/config.h
+++ b/keyboards/ogre/ergo_split/config.h
@@ -20,7 +20,6 @@ along with this program. If not, see .
#define SPLIT_HAND_PIN D1
#define RGBLED_NUM 14
-#define RGBLIGHT_LED_MAP { 6, 5, 4, 3, 2, 1, 0, 13, 12,11, 10, 9, 8, 7}
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/ogre/ergo_split/info.json b/keyboards/ogre/ergo_split/info.json
index 1055724b5ffa..3321f0e1be1c 100644
--- a/keyboards/ogre/ergo_split/info.json
+++ b/keyboards/ogre/ergo_split/info.json
@@ -17,6 +17,7 @@
"soft_serial_pin": "D3"
},
"rgblight": {
+ "led_map": [6, 5, 4, 3, 2, 1, 0, 13, 12, 11, 10, 9, 8, 7],
"split_count": [7, 7]
},
"ws2812": {
diff --git a/keyboards/om60/config.h b/keyboards/om60/config.h
index 16957f9a0a1f..1936b2438226 100644
--- a/keyboards/om60/config.h
+++ b/keyboards/om60/config.h
@@ -36,23 +36,6 @@ along with this program. If not, see .
#ifndef RGBLED_NUM
#define RGBLED_NUM 69
- #define RGBLIGHT_LED_MAP { \
- 0, 1, 2, 3, \
- 8, 7, 6, 5, 4, \
- 9,10,11,12,13, \
- 18,17,16,15,14, \
- 19,20,21,22,23, \
- 28,27,26,25,24, \
- 29,30,31,32,33, \
- 38,37,36,35,34, \
- 39,40,41,42,43, \
- 48,47,46,45,44, \
- 49,50,51,52,53, \
- 58,57,56,55,54, \
- 59,60,61,62,63, \
- 68,67,66,65,64 \
- }
-
#define RGBLIGHT_SLEEP
#endif
diff --git a/keyboards/om60/info.json b/keyboards/om60/info.json
index 7efa8097d602..288c5aace442 100644
--- a/keyboards/om60/info.json
+++ b/keyboards/om60/info.json
@@ -13,6 +13,9 @@
{"pin_a": "B4", "pin_b": "B5"}
]
},
+ "rgblight": {
+ "led_map": [0, 1, 2, 3, 8, 7, 6, 5, 4, 9, 10, 11, 12, 13, 18, 17, 16, 15, 14, 19, 20, 21, 22, 23, 28, 27, 26, 25, 24, 29, 30, 31, 32, 33, 38, 37, 36, 35, 34, 39, 40, 41, 42, 43, 48, 47, 46, 45, 44, 49, 50, 51, 52, 53, 58, 57, 56, 55, 54, 59, 60, 61, 62, 63, 68, 67, 66, 65, 64]
+ },
"ws2812": {
"pin": "D3"
},
diff --git a/keyboards/omkbd/ergodash/rev1/config.h b/keyboards/omkbd/ergodash/rev1/config.h
index 851116d455ae..04de28d2b343 100644
--- a/keyboards/omkbd/ergodash/rev1/config.h
+++ b/keyboards/omkbd/ergodash/rev1/config.h
@@ -42,10 +42,6 @@ along with this program. If not, see .
#define RGBLED_NUM 24
#define RGBLIGHT_SPLIT
-// The LEDs on the slave half go in reverse order
-#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, \
- 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12}
-
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
diff --git a/keyboards/omkbd/ergodash/rev1/info.json b/keyboards/omkbd/ergodash/rev1/info.json
index 3a395bde83ec..b73694688cc5 100644
--- a/keyboards/omkbd/ergodash/rev1/info.json
+++ b/keyboards/omkbd/ergodash/rev1/info.json
@@ -21,6 +21,7 @@
"soft_serial_pin": "D0"
},
"rgblight": {
+ "led_map": [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12],
"split_count": [12, 12]
},
"ws2812": {
diff --git a/keyboards/s_ol/0xc_pad/0xc_pad.c b/keyboards/s_ol/0xc_pad/0xc_pad.c
index c471da92cc5f..ba8cd96aec20 100644
--- a/keyboards/s_ol/0xc_pad/0xc_pad.c
+++ b/keyboards/s_ol/0xc_pad/0xc_pad.c
@@ -13,7 +13,7 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*/
-#include "0xc_pad.h"
+#include "quantum.h"
#ifdef RGB_MATRIX_ENABLE
led_config_t g_led_config = { {
diff --git a/keyboards/s_ol/0xc_pad/0xc_pad.h b/keyboards/s_ol/0xc_pad/0xc_pad.h
deleted file mode 100644
index 013f4c89dcb9..000000000000
--- a/keyboards/s_ol/0xc_pad/0xc_pad.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Copyright 2021 s-ol
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-#pragma once
-
-#include "quantum.h"
-
-#define LED_LAYOUT( \
- \
- k01, k05, k02, k06, k10, k03, k07, k11, k15, k08, k12, k16) \
- \
- { k01, k02, k03, k08, k07, k06, k05, k10, k11, k12, k16, k15, }
diff --git a/keyboards/salicylic_acid3/naked64/rev1/config.h b/keyboards/salicylic_acid3/naked64/rev1/config.h
index 33ee2b503027..1cf00110ac58 100644
--- a/keyboards/salicylic_acid3/naked64/rev1/config.h
+++ b/keyboards/salicylic_acid3/naked64/rev1/config.h
@@ -24,7 +24,6 @@ along with this program. If not, see .
#define LOCKING_RESYNC_ENABLE
#define RGBLED_NUM 12 // Number of LEDs
-#define RGBLIGHT_LED_MAP { 0, 1, 3, 2, 2, 3, 2, 3, 4, 5, 6, 7 }
#ifndef IOS_DEVICE_ENABLE
#define RGBLIGHT_LIMIT_VAL 180
diff --git a/keyboards/salicylic_acid3/naked64/rev1/info.json b/keyboards/salicylic_acid3/naked64/rev1/info.json
index a58acf807b00..cb9a7b341f1f 100644
--- a/keyboards/salicylic_acid3/naked64/rev1/info.json
+++ b/keyboards/salicylic_acid3/naked64/rev1/info.json
@@ -22,6 +22,9 @@
}
}
},
+ "rgblight": {
+ "led_map": [0, 1, 3, 2, 2, 3, 2, 3, 4, 5, 6, 7]
+ },
"ws2812": {
"pin": "B6"
},
diff --git a/keyboards/sets3n/kk980/config.h b/keyboards/sets3n/kk980/config.h
index d7b29ad73281..bff26cfc80b8 100644
--- a/keyboards/sets3n/kk980/config.h
+++ b/keyboards/sets3n/kk980/config.h
@@ -34,14 +34,6 @@
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 102
-#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,\
- 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, \
- 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \
- 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, \
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, \
- 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, \
- 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, \
- 96, 97, 98, 99, 100, 101, 102 } // 1 --> ScollLock 2 --> CapsLock 3 --> Bluetooth 4 --> NumLock
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/silverbullet44/config.h b/keyboards/silverbullet44/config.h
index 67d78aa0c62d..39a96f10c62b 100644
--- a/keyboards/silverbullet44/config.h
+++ b/keyboards/silverbullet44/config.h
@@ -36,8 +36,6 @@ along with this program. If not, see .
#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_TYPING_HEATMAP
#else
- #define RGBLIGHT_LED_MAP { 0,1,2,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,3,4,5,6, \
- 26,27,28,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,29,30,31,32 }
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/silverbullet44/info.json b/keyboards/silverbullet44/info.json
index 9ca5218d120b..4146b4feeeda 100644
--- a/keyboards/silverbullet44/info.json
+++ b/keyboards/silverbullet44/info.json
@@ -16,6 +16,7 @@
},
"rgblight": {
"max_brightness": 150,
+ "led_map": [0, 1, 2, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 3, 4, 5, 6, 26, 27, 28, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 29, 30, 31, 32],
"split_count": [26, 26]
},
"matrix_pins": {
diff --git a/keyboards/sofle/keyhive/config.h b/keyboards/sofle/keyhive/config.h
index 2dccaba6ba4b..9584b56b4eaf 100755
--- a/keyboards/sofle/keyhive/config.h
+++ b/keyboards/sofle/keyhive/config.h
@@ -37,30 +37,4 @@
# define RGBLIGHT_VAL_STEP 17
//# define RGBLIGHT_LAYERS //Enable layer light indicators. Not required as updates are done in layer_state_set_user and led_update_user (+588).
# define RGBLIGHT_SLEEP //Turn off LEDs when computer sleeping (+72)
-
-//RGB LED Conversion macro from physical array to electric array (+146). This results in better looking animated effects.
-//First section is the LED matrix, second section is the electrical wiring order, and the third section is the desired mapping
-# define LED_LAYOUT( \
- L00, L01, L02, L03, L04, L05, L08, L09, L010, L011, L012, L013, \
- L10, L12, L14, L19, L111, L113, \
- L20, L21, L22, L23, L24, L25, L28, L29, L210, L211, L212, L213, \
- L30, L31, L32, L33, L34, L35, L38, L39, L310, L311, L312, L313, \
- L40, L42, L44, L49, L411, L413, \
- L50, L51, L52, L53, L54, L55, L58, L59, L510, L511, L512, L513, \
- L62, L63, L64, L65, L66, L67, L68, L69, L610, L611, \
- L71, L76, L77, L712 )\
- { \
- L14,L12,L10,L40,L42,L44,L71,L76,L66,L65,L55,L35,L25,L05,L04,L24,L34,L54,L64,L63,L53,L33,L23,L03,L02,L22,L32,L52,L62,L51,L31,L21,L01,L00,L20,L30,L50,L19,L111,L113,L413,L411,L49,L712,L77,L67,L68,L58,L38,L28,L08,L09,L29,L39,L59,L69,L610,L510,L310,L210,L010,L011,L211,L311,L511,L611,L512,L312,L212,L012,L013,L213,L313,L513, \
- }
-//RGB LED logical order map
-# define RGBLIGHT_LED_MAP LED_LAYOUT( \
- 5, 6, 17, 18, 29, 30, 43, 44, 55, 56, 67, 68, \
- 4, 16, 28, 45, 57, 69, \
- 3, 7, 15, 19, 27, 31, 42, 46, 54, 58, 66, 70, \
- 2, 8, 14, 20, 26, 32, 41, 47, 53, 59, 65, 71, \
- 1, 13, 25, 48, 60, 72, \
- 0, 9, 12, 21, 24, 33, 40, 49, 52, 61, 64, 73, \
- 11, 22, 23, 34, 35, 38, 39, 50, 51, 62, \
- 10, 36, 37, 63 )
-
#endif
diff --git a/keyboards/sofle/keyhive/info.json b/keyboards/sofle/keyhive/info.json
index 12053234fffe..93bbae19dc71 100644
--- a/keyboards/sofle/keyhive/info.json
+++ b/keyboards/sofle/keyhive/info.json
@@ -11,6 +11,7 @@
},
"rgblight": {
"max_brightness": 100,
+ "led_map": [28, 16, 4, 1, 13, 25, 10, 36, 35, 34, 33, 32, 31, 30, 29, 27, 26, 24, 23, 22, 21, 20, 19, 18, 17, 15, 14, 12, 11, 9, 8, 7, 6, 5, 3, 2, 0, 45, 57, 69, 72, 60, 48, 63, 37, 38, 39, 40, 41, 42, 43, 44, 46, 47, 49, 50, 51, 52, 53, 54, 55, 56, 58, 59, 61, 62, 64, 65, 66, 67, 68, 70, 71, 73],
"split_count": [37, 37]
},
"matrix_pins": {
diff --git a/keyboards/star75/config.h b/keyboards/star75/config.h
index 980009fe0bd2..e686b9c6bdb3 100644
--- a/keyboards/star75/config.h
+++ b/keyboards/star75/config.h
@@ -21,7 +21,6 @@ SPDX-License-Identifier: GPL-2.0-or-later */
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 1
#define RGBLIGHT_LAYERS
-#define RGBLIGHT_LED_MAP { 0, 1 }
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/taleguers/taleguers75/config.h b/keyboards/taleguers/taleguers75/config.h
index b62209abaad4..66d2753bf366 100644
--- a/keyboards/taleguers/taleguers75/config.h
+++ b/keyboards/taleguers/taleguers75/config.h
@@ -33,7 +33,6 @@
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#define RGBLED_NUM 6
-#define RGBLIGHT_LED_MAP { 5, 4, 3, 2, 1, 0 }
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/taleguers/taleguers75/info.json b/keyboards/taleguers/taleguers75/info.json
index 229894fa9d05..02feec7ab8bb 100644
--- a/keyboards/taleguers/taleguers75/info.json
+++ b/keyboards/taleguers/taleguers75/info.json
@@ -18,6 +18,9 @@
{"pin_a": "B6", "pin_b": "B5"}
]
},
+ "rgblight": {
+ "led_map": [5, 4, 3, 2, 1, 0]
+ },
"ws2812": {
"pin": "D3"
},
diff --git a/keyboards/toffee_studio/blueberry/config.h b/keyboards/toffee_studio/blueberry/config.h
index 07a4bae2be0d..4b24094b220e 100644
--- a/keyboards/toffee_studio/blueberry/config.h
+++ b/keyboards/toffee_studio/blueberry/config.h
@@ -17,15 +17,6 @@
#pragma once
# define RGBLED_NUM 22
-
-/* RGB LED logical order map */
-/* Top->Bottom, Right->Left */
-#define RGBLIGHT_LED_MAP { \
- 19, 18, 17, 16, 15, 14, 13, 12, 11, \
- 20, 10, \
- 21, 9, \
- 0, 1, 2, 3, 4, 5, 6, 7, 8 }
-
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
diff --git a/keyboards/toffee_studio/blueberry/info.json b/keyboards/toffee_studio/blueberry/info.json
index 6acd8f4a589c..eb32a1209dad 100644
--- a/keyboards/toffee_studio/blueberry/info.json
+++ b/keyboards/toffee_studio/blueberry/info.json
@@ -12,7 +12,8 @@
"pin": "D0"
},
"rgblight": {
- "max_brightness": 192
+ "max_brightness": 192,
+ "led_map": [19, 18, 17, 16, 15, 14, 13, 12, 11, 20, 10, 21, 9, 0, 1, 2, 3, 4, 5, 6, 7, 8]
},
"matrix_pins": {
"cols": ["B6", "D4", "D6", "D7", "B4", "B5", "C6", "C7"],
diff --git a/keyboards/unison/v04/config.h b/keyboards/unison/v04/config.h
index d80dc827f6b6..af4aaefea3a4 100644
--- a/keyboards/unison/v04/config.h
+++ b/keyboards/unison/v04/config.h
@@ -27,7 +27,6 @@ along with this program. If not, see .
/* RGB Lighting */
#define RGBLED_NUM 7 // Layer Indicator(2) + Rotary Encoder(5)
- #define RGBLIGHT_LED_MAP {1, 2, 0, 3, 4, 5, 6} // align LEDs from Left to Right
#define RGBLIGHT_HUE_STEP 4
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/unison/v04/info.json b/keyboards/unison/v04/info.json
index 481c07f7a9af..b3c9a59392b7 100644
--- a/keyboards/unison/v04/info.json
+++ b/keyboards/unison/v04/info.json
@@ -12,6 +12,9 @@
"cols": ["B3", "E6", "F1", "F5", "F7", "B2", "F0", "F4", "F6", "C7"],
"rows": ["B3", "E6", "F1", "F5", "F7", "B2", "F0", "F4", "F6", "C7"]
},
+ "rgblight": {
+ "led_map": [1, 2, 0, 3, 4, 5, 6]
+ },
"ws2812": {
"pin": "B7"
},
diff --git a/keyboards/yoichiro/lunakey_mini/config.h b/keyboards/yoichiro/lunakey_mini/config.h
index 9c2fd0d8eff4..5663505876dd 100644
--- a/keyboards/yoichiro/lunakey_mini/config.h
+++ b/keyboards/yoichiro/lunakey_mini/config.h
@@ -19,8 +19,6 @@ along with this program. If not, see .
#define RGBLED_NUM 12
#define RGBLIGHT_SPLIT
- #define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, \
- 11, 10, 9, 8, 7, 6 }
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/yoichiro/lunakey_mini/info.json b/keyboards/yoichiro/lunakey_mini/info.json
index c255c431c225..59741d4aa01d 100644
--- a/keyboards/yoichiro/lunakey_mini/info.json
+++ b/keyboards/yoichiro/lunakey_mini/info.json
@@ -17,6 +17,7 @@
"soft_serial_pin": "D2"
},
"rgblight": {
+ "led_map": [0, 1, 2, 3, 4, 5, 11, 10, 9, 8, 7, 6],
"split_count": [6, 6]
},
"ws2812": {
diff --git a/keyboards/yoichiro/lunakey_pico/config.h b/keyboards/yoichiro/lunakey_pico/config.h
index cf819293be9a..a95edc0358b7 100644
--- a/keyboards/yoichiro/lunakey_pico/config.h
+++ b/keyboards/yoichiro/lunakey_pico/config.h
@@ -15,9 +15,6 @@
#define WS2812_PIO_USE_PIO1
-#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, \
- 11, 10, 9, 8, 7, 6 }
-
/*
* Feature disable options
* These options are also useful to firmware size reduction.
diff --git a/keyboards/yoichiro/lunakey_pico/info.json b/keyboards/yoichiro/lunakey_pico/info.json
index 2b477e726c25..bf4b2a251094 100644
--- a/keyboards/yoichiro/lunakey_pico/info.json
+++ b/keyboards/yoichiro/lunakey_pico/info.json
@@ -26,6 +26,7 @@
},
"rgblight": {
"led_count": 12,
+ "led_map": [0, 1, 2, 3, 4, 5, 11, 10, 9, 8, 7, 6],
"sleep": true,
"split": true,
"split_count": [6, 6],
diff --git a/keyboards/yushakobo/navpad/10/rev1/config.h b/keyboards/yushakobo/navpad/10/rev1/config.h
deleted file mode 100644
index d4a4e48d776e..000000000000
--- a/keyboards/yushakobo/navpad/10/rev1/config.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
-Copyright 2021 yushakobo
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
-#pragma once
-
-# define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 8, 7 }
diff --git a/keyboards/yushakobo/navpad/10/rev1/info.json b/keyboards/yushakobo/navpad/10/rev1/info.json
index bd20c0d0b479..a35dc4d5e977 100644
--- a/keyboards/yushakobo/navpad/10/rev1/info.json
+++ b/keyboards/yushakobo/navpad/10/rev1/info.json
@@ -2,6 +2,9 @@
"usb": {
"device_version": "0.0.1"
},
+ "rgblight": {
+ "led_map": [0, 1, 2, 3, 4, 5, 6, 8, 7]
+ },
"matrix_pins": {
"cols": ["F5", "F6", "B2", "B3", "B1", "F7"],
"rows": ["D4", "C6", "D7", "E6", "B4", "F4"]
diff --git a/keyboards/yushakobo/navpad/10_helix_r/config.h b/keyboards/yushakobo/navpad/10_helix_r/config.h
index fd88d5eab695..19eabd8dcdb8 100644
--- a/keyboards/yushakobo/navpad/10_helix_r/config.h
+++ b/keyboards/yushakobo/navpad/10_helix_r/config.h
@@ -18,14 +18,6 @@ along with this program. If not, see .
#pragma once
#define EE_HANDS
-
-# define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 8, 7, \
- 9, 10, 11, 12, 13, 14, \
- 20, 19, 18, 17, 16, 15, \
- 21, 22, 23, 24, 25, 26, \
- 33, 32, 31, 30, 29, 28, 27, \
- 34, 35, 36, 37, 38, 39, 40 }
-
# define RGBLED_NUM 9+32
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
diff --git a/keyboards/yushakobo/navpad/10_helix_r/info.json b/keyboards/yushakobo/navpad/10_helix_r/info.json
index 9c51e8ad746e..2b14fccf5834 100644
--- a/keyboards/yushakobo/navpad/10_helix_r/info.json
+++ b/keyboards/yushakobo/navpad/10_helix_r/info.json
@@ -39,6 +39,7 @@
},
"rgblight": {
"max_brightness": 120,
+ "led_map": [0, 1, 2, 3, 4, 5, 6, 8, 7, 9, 10, 11, 12, 13, 14, 20, 19, 18, 17, 16, 15, 21, 22, 23, 24, 25, 26, 33, 32, 31, 30, 29, 28, 27, 34, 35, 36, 37, 38, 39, 40],
"split_count": [9, 32]
},
"processor": "atmega32u4",
diff --git a/keyboards/yushakobo/quick17/config.h b/keyboards/yushakobo/quick17/config.h
index 00018d319c4c..118a47eba64f 100644
--- a/keyboards/yushakobo/quick17/config.h
+++ b/keyboards/yushakobo/quick17/config.h
@@ -42,11 +42,6 @@ along with this program. If not, see .
#ifdef RGBLIGHT_ENABLE
-# define RGBLIGHT_LED_MAP {\
- 6, 7, 12, 13, 14, 15,\
- 16, 17, 11, 10, 9, 8,\
- 0, 1, 2, 3, 4, 5\
- }
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/yushakobo/quick17/info.json b/keyboards/yushakobo/quick17/info.json
index 1889a006438c..ce8c77933afe 100644
--- a/keyboards/yushakobo/quick17/info.json
+++ b/keyboards/yushakobo/quick17/info.json
@@ -12,7 +12,8 @@
"driver": "WS2812"
},
"rgblight": {
- "max_brightness": 150
+ "max_brightness": 150,
+ "led_map": [6, 7, 12, 13, 14, 15, 16, 17, 11, 10, 9, 8, 0, 1, 2, 3, 4, 5]
},
"matrix_pins": {
"cols": ["F5", "D4", "E6", "F7", "C6", "D7"],