Skip to content

Latest commit

 

History

History
85 lines (60 loc) · 5.17 KB

README.md

File metadata and controls

85 lines (60 loc) · 5.17 KB
Raw

margerine

Episode 2: Revenge of the ¯\_(ツ)_/¯

margerine is a root exploit and adb enabler for the DJI Air Unit (wm150), Caddx Vista (lt150), FPV Goggles V1 (gl150), and FPV Googles V2 (gl170/gp150) from the same people that brought you USB Video Out.

Currently only works reliably on Windows and Mac OS X, Linux has strange issues in the USB stack - YMMW.

tl;dr;

Install nodejs v16 or above and the Javascript dependencies:

npm install

Remove your SD card for the duration of the exploit, power up the device, connect it via USB and run:

node margerine.js unlock

Have fun! consider donating and join us on our Discord.

Troubleshooting

  • waving wand, result e0 - make sure you've followed all the instructions below, reboot your Goggles and try again. It should eventually work.
  • The device might change it's COM port number on Windows (eg. COM4 -> COM5) in the middle of the exploit and error out. That's a good sign! Look up the new COM port in Device Manager (if auto detect didn't work for you) and re-run the exploit to finish everything up.
  • The device being exploited should not be connected to anything else; i.e. Googles to AU or AU to Goggles.
  • Make sure there's no SD card in your device.
  • V2 Goggles must be flashed from DIY mode to 01.00.0606.
    • Checking the menus in DIY mode is insufficient. Make sure Assistant says "Refresh" next to 0606, rather than "Downgrade". If you see "Downgrade", go ahead and downgrade.
    • If you've flashed to 01.02.0015 in drone mode the exploit won't work and you can't downgrade at the moment, sorry.
    • Despite the bigger version number 01.02.0020 in drone mode, goggles can be downgraded to 0606 in DIY mode.

Other notes

  • Requires an internet connection. Challange signing procedure happens on Drone-Hacks server kindly provided by @bin4ry.
  • Takes few minutes. Make sure your battery is not too low when powering AU/Vista from a quad.
  • You have to run node margerine.js lock before the Assistant will allow you to flash firmwares again.
  • Disables SELinux for you
  • On *150 remounts /proc/cmdline so that mp_state=engineering, which enables adb
  • With great power comes great responsibility - you CAN bootloop/brick your device if you modify or delete important files. There are currently no low level recovery methods available.

What can I do with this?

  • Play Doom
  • Customize the UI theme in /system/gui/xml/themes/defult/theme.xml
  • Pair an Air Unit (or Vista) to another Air Unit using /system/bin/modem_info.sh reverse on one of them.
  • Talk to connected devices via TCP or UDP. Goggles are 192.168.41.1 and air side is 192.168.41.2.
  • Debug USB devices such as input on V2 Goggles (no OTG on V1) by adb shell-ing into a connected Vista/AU and then using adb connect 192.168.41.1 && adb shell to debug wirelessily.
  • Build stuff with the latest Android NDK armv7 architecture, target platform 23.
    • A modified Directfb framebuffer library is available for drawing to an ARGB target to be overlaid on top of the video feed.
    • Direct access to the framebuffer is not available, except via special undocumented DMI bullsh*t.
    • Check out the dfbdoom project.
  • Reverse engineer stuff with IDA, Ghidra and/or Frida.

Additional Documentation

Check out our wonderful wiki.

Advanced usage

node margerine --help
margerine <command>

Commands:
  margerine unlock [serialport]        unlock device and enable adb
  margerine lock [serialport]          disable adb and relock device
  margerine proxy [port]               start the built in http -> https proxy
  margerine.js shell <command> [port]  execute a command on rooted device,
                                       once per reboot
Options:
  --help     Show help                                               
  --version  Show version number

To-do

See the wiki.

It's spelled margarine

No, it's not.

Credits

While this is an original exploit by Joonas Trussmann, it would not have been even remotely possible without work by @tmbinc and @bin4ry. Also a shout out to the rest of the OG's for all their work on dji-firmware-tools.

Special thanks go to: @jaanuke, @funnel and @fichek over on our Discord.

Support the effort

If you'd like, you can support the effort on Open Collective, send some ETH to 0xbAB1fec80922328F27De6E2F1CDBC2F322397637 or BTC to 3L7dE5EHtyd2b1tXBwdnWC2MADkV2VTbrq.