Skip to content

Files

Latest commit

32c8476 · May 25, 2016

History

History
140 lines (106 loc) · 5.64 KB

README.md

File metadata and controls

140 lines (106 loc) · 5.64 KB

Using Python Layers in your Caffe models with DIGITS

Caffe gives users the ability to define custom layer types in Python, instead of the usual C++/CUDA. This can be a very useful feature, but it is poorly documented and tricky to implement correctly. This walkthrough will show you how to get started with Python layers in DIGITS.

NOTE: This feature is included automatically if you are building Caffe with CMake or installing the Deb package. If you are building with Make, you will need to uncomment "WITH_PYTHON_LAYER := 1" in your Makefile.config to enable it.

Adding Occlusions to MNIST

For this example, we are going to train LeNet on the MNIST dataset, but we are going to add a Python layer which cuts out one fourth of the image before feeding it through the network. This simulates occluded data and should result in a model which is robust to occlusions.

For example, before occlusion might become after occlusion.

Create a Dataset

First, follow these instructions to create the MNIST dataset in DIGITS (if you haven't already).

Create a Python File

Next, you'll want to create a Python file which contains the definition for your Python layer. Open up a text editor and create a new file with these contents.

import caffe
import random

class BlankSquareLayer(caffe.Layer):

    def setup(self, bottom, top):
        assert len(bottom) == 1,            'requires a single layer.bottom'
        assert bottom[0].data.ndim >= 3,    'requires image data'
        assert len(top) == 1,               'requires a single layer.top'

    def reshape(self, bottom, top):
        # Copy shape from bottom
        top[0].reshape(*bottom[0].data.shape)

    def forward(self, bottom, top):
        # Copy all of the data
        top[0].data[...] = bottom[0].data[...]
        # Then zero-out one fourth of the image
        height = top[0].data.shape[-2]
        width = top[0].data.shape[-1]
        h_offset = random.randrange(height/2)
        w_offset = random.randrange(width/2)
        top[0].data[...,
                h_offset:(h_offset + height/2),
                w_offset:(w_offset + width/2),
                ] = 0

    def backward(self, top, propagate_down, bottom):
        pass

Save the file. We'll upload it along with your model in the next section.

Create a Model

NOTE: If you've never created a model in DIGITS before, you might want to follow the walkthrough in the Getting Started guide before proceeding.

  1. Click on New Model > Images > Classification from the homepage.
  2. Select your MNIST dataset from the list of datasets.
  3. Click on Use client side file and select the Python file that you created earlier.
  4. Click on LeNet under Standard Networks > Caffe.
  5. Click on the Customize link which appears to the right.

create model

That will take us to a pane where we can customize LeNet to add our custom Python layer. We are going to insert our layer in between the scale layer and the conv1 layer. Find those layers (a few lines from the top) and insert this snippet of prototxt in-between:

layer {
  name: "blank_square"
  type: "Python"
  bottom: "scaled"
  top: "scaled"
  python_param {
    module: "digits_python_layers"
    layer: "BlankSquareLayer"
  }
}

When you click on Visualize, you should see this:

network visualization

Then simply give your model a name and click Create. You should see your model training session start. If you're paying attention, you'll notice that this model reaches a lower accuracy than the default LeNet network. Why is that?

NOTE: The current version of Caffe doesn't allow multi-GPU for networks with Python layers. If you want to use a Python layer, you need to use a single GPU for training. See BVLC/caffe#2936.

Testing the Model

Now for the fun part. Find an image in the MNIST test set and upload it to Test a single image (at the bottom of the page). Don't forget to click on Show visualizations and statistics! The original image is displayed on the top left, next to the predicted class. In the Visualization column, you'll see the result of subtracting the mean image as the data activation. Just below it, you'll see the result of down-scaling the image from [0 - 255] to [-1 - 1]. You'll also see that a random fourth of the image has been removed - that's thanks to our Python layer!

lenet activations

NOTE: The second activation is displayed as a colorful heatmap, even though the underlying data is still single-channel and could be displayed as a grayscale image. The "data" activation is treated as a special case and all other activations are converted to heatmaps.

Congratulations, you have completed this tutorial!

Extra credit

For extra credit, try to change your Python layer to crop out two smaller squares instead of one big one:

two small squares

Or try adding the layer to AlexNet instead of LeNet:

alexnet activations

Discussion

If you actually wanted to build an occlusion-resistant model, you would only want to add occlusions to the training data - not to the validation or test data. To do that, use this prototxt snippet instead to exclude the layer from the validation/test phases:

layer {
  name: "blank_square"
  type: "Python"
  bottom: "scale"
  top: "scale"
  python_param {
    module: "digits_python_layers"
    layer: "BlankSquareLayer"
  }
  include {
    phase: TRAIN
  }
}