diff --git a/octoprint_telegram/__init__.py b/octoprint_telegram/__init__.py
index e7a3e4c..590f7f4 100644
--- a/octoprint_telegram/__init__.py
+++ b/octoprint_telegram/__init__.py
@@ -86,20 +86,9 @@ def run(self):
 							elif command=="/status":
 								if self.main._printer.is_printing():
 									status = self.main._printer.get_current_data()
-									self.main.on_event("TelegramSendStatus", {'z': (status['currentZ'] or 0.0)})
+									self.main.on_event("TelegramSendPrintingStatus", {'z': (status['currentZ'] or 0.0)})
 								else:
-									temps = self.main._printer.get_current_temperatures()
-									# {'bed': {'actual': 1.0, 'target': 1.0, 'offset': 0}, 'tool0': {'actual': 164.76, 'target': 220.0, 'offset': 0}}
-									# {'bed': {'actual': 0.0, 'target': 0.0, 'offset': 0}, 'tool0': {'actual': 18.7, 'target': 0.0, 'offset': 0}}
-									msg = "Not printing."
-									msg+="\n\nTemperatures:\n"
-									if not (temps['bed']['actual']==0.0 and temps['bed']['target']==0.0) and not (temps['bed']['actual']==1.0 and temps['bed']['target']==1.0):
-										msg += "Bed: " + str(temps['bed']['actual']) + "/" + str(temps['bed']['target']) + "\n"
-									if "tool0" in temps:
-										msg += "Extruder 1: {0} (Target {1})\n".format(temps['tool0']['actual'], temps['tool0']['target'])
-									if "tool1" in temps:
-										msg += "Extruder 2: {0} (Target {1})".format(temps['tool1']['actual'], temps['tool1']['target'])
-									self.main.send_msg(msg)
+									self.main.on_event("TelegramSendNotPrintingStatus", {})
 							elif command=="/help":
 								msg = "You can use following commands:\n"
 								msg+= "/photo - Sends a current photo.\n"
@@ -194,6 +183,7 @@ def get_settings_defaults(self):
 				PrintFailed = "Printing {file} failed.",
 				ZChange = "Printing at Z={z}.\nBed {bed_temp}/{bed_target}, Extruder {e1_temp}/{e1_target}.\n{time_done}, {percent}% done, {time_left} remaining.",
 				PrintDone = "Finished printing {file}.",
+				TelegramSendNotPrintingStatus = "Not printing.\nBed {bed_temp}/{bed_target}, Extruder {e1_temp}/{e1_target}."
 			)
 		)
 	
@@ -221,7 +211,7 @@ def is_notification_necessary(self, new_z, old_z):
 		
 	def on_event(self, event, payload, *args, **kwargs):
 		try:
-			if event != "PrintDone" and event != "PrintStarted" and event != "ZChange" and event!="PrintFailed" and event!="TelegramSendStatus":
+			if event != "PrintDone" and event != "PrintStarted" and event != "ZChange" and event!="PrintFailed" and event!="TelegramSendPrintingStatus" and event!="TelegramSendNotPrintingStatus":
 				# return as fast as possible
 				return
 			
@@ -260,7 +250,7 @@ def on_event(self, event, payload, *args, **kwargs):
 					return
 				if not self._settings.get_boolean(["message_at_print_failed"]):
 					return
-			elif event=="TelegramSendStatus":
+			elif event=="TelegramSendPrintingStatus":
 				z = payload['z']
 				# Change the event type in order to generate a ZChange message
 				event = "ZChange"
diff --git a/octoprint_telegram/templates/telegram_settings.jinja2 b/octoprint_telegram/templates/telegram_settings.jinja2
index 13b8544..d415f3e 100644
--- a/octoprint_telegram/templates/telegram_settings.jinja2
+++ b/octoprint_telegram/templates/telegram_settings.jinja2
@@ -84,6 +84,11 @@
 			<textarea rows="4" class="block" data-bind="value: settings.settings.plugins.telegram.messages.ZChanged"></textarea>
 		</div>
 	</div>
-
+	<div class="control-group">
+		<label class="control-label">{{ _('Message for /status when not printing') }}</label>
+		<div class="controls">
+			<textarea rows="4" class="block" data-bind="value: settings.settings.plugins.telegram.messages.TelegramSendNotPrintingStatus"></textarea>
+		</div>
+	</div>
 	
 </form>
\ No newline at end of file