RefundablePostDeliveryCrowdsaleImpl.sol

pragma solidity ^0.5.2;

/**
 * @title ERC20 interface
 * @dev see https://eips.ethereum.org/EIPS/eip-20
 */
interface IERC20 {
    function transfer(address to, uint256 value) external returns (bool);

    function approve(address spender, uint256 value) external returns (bool);

    function transferFrom(address from, address to, uint256 value) external returns (bool);

    function totalSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/**
 * @title SafeMath
 * @dev Unsigned math operations with safety checks that revert on error
 */
library SafeMath {
    /**
     * @dev Multiplies two unsigned integers, reverts on overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b);

        return c;
    }

    /**
     * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Adds two unsigned integers, reverts on overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);

        return c;
    }

    /**
     * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
     * reverts when dividing by zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0);
        return a % b;
    }
}

/**
 * Utility library of inline functions on addresses
 */
library Address {
    /**
     * Returns whether the target address is a contract
     * @dev This function will return false if invoked during the constructor of a contract,
     * as the code is not actually created until after the constructor finishes.
     * @param account address of the account to check
     * @return whether the target address is a contract
     */
    function isContract(address account) internal view returns (bool) {
        uint256 size;
        // XXX Currently there is no better way to check if there is a contract in an address
        // than to check the size of the code at that address.
        // See https://ethereum.stackexchange.com/a/14016/36603
        // for more details about how this works.
        // TODO Check this again before the Serenity release, because all addresses will be
        // contracts then.
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
}

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require((value == 0) || (token.allowance(address(this), spender) == 0));
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value);
        callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must equal true).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves.

        // A Solidity high level call has three parts:
        //  1. The target address is checked to verify it contains contract code
        //  2. The call itself is made, and success asserted
        //  3. The return value is decoded, which in turn checks the size of the returned data.

        require(address(token).isContract());

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = address(token).call(data);
        require(success);

        if (returndata.length > 0) { // Return data is optional
            require(abi.decode(returndata, (bool)));
        }
    }
}

/**
 * @title Helps contracts guard against reentrancy attacks.
 * @author Remco Bloemen <remco@2π.com>, Eenae <alexey@mixbytes.io>
 * @dev If you mark a function `nonReentrant`, you should also
 * mark it `external`.
 */
contract ReentrancyGuard {
    /// @dev counter to allow mutex lock with only one SSTORE operation
    uint256 private _guardCounter;

    constructor () internal {
        // The counter starts at one to prevent changing it from zero to a non-zero
        // value, which is a more expensive operation.
        _guardCounter = 1;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _guardCounter += 1;
        uint256 localCounter = _guardCounter;
        _;
        require(localCounter == _guardCounter);
    }
}

/**
 * @title Crowdsale
 * @dev Crowdsale is a base contract for managing a token crowdsale,
 * allowing investors to purchase tokens with ether. This contract implements
 * such functionality in its most fundamental form and can be extended to provide additional
 * functionality and/or custom behavior.
 * The external interface represents the basic interface for purchasing tokens, and conforms
 * the base architecture for crowdsales. It is *not* intended to be modified / overridden.
 * The internal interface conforms the extensible and modifiable surface of crowdsales. Override
 * the methods to add functionality. Consider using 'super' where appropriate to concatenate
 * behavior.
 */
contract Crowdsale is ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // The token being sold
    IERC20 private _token;

    // Address where funds are collected
    address payable private _wallet;

    // How many token units a buyer gets per wei.
    // The rate is the conversion between wei and the smallest and indivisible token unit.
    // So, if you are using a rate of 1 with a ERC20Detailed token with 3 decimals called TOK
    // 1 wei will give you 1 unit, or 0.001 TOK.
    uint256 private _rate;

    // Amount of wei raised
    uint256 private _weiRaised;

    /**
     * Event for token purchase logging
     * @param purchaser who paid for the tokens
     * @param beneficiary who got the tokens
     * @param value weis paid for purchase
     * @param amount amount of tokens purchased
     */
    event TokensPurchased(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);

    /**
     * @param rate Number of token units a buyer gets per wei
     * @dev The rate is the conversion between wei and the smallest and indivisible
     * token unit. So, if you are using a rate of 1 with a ERC20Detailed token
     * with 3 decimals called TOK, 1 wei will give you 1 unit, or 0.001 TOK.
     * @param wallet Address where collected funds will be forwarded to
     * @param token Address of the token being sold
     */
    constructor (uint256 rate, address payable wallet, IERC20 token) public {
        require(rate > 0);
        require(wallet != address(0));
        require(address(token) != address(0));

        _rate = rate;
        _wallet = wallet;
        _token = token;
    }

    /**
     * @dev fallback function ***DO NOT OVERRIDE***
     * Note that other contracts will transfer funds with a base gas stipend
     * of 2300, which is not enough to call buyTokens. Consider calling
     * buyTokens directly when purchasing tokens from a contract.
     */
    function () external payable {
        buyTokens(msg.sender);
    }

    /**
     * @return the token being sold.
     */
    function token() public view returns (IERC20) {
        return _token;
    }

    /**
     * @return the address where funds are collected.
     */
    function wallet() public view returns (address payable) {
        return _wallet;
    }

    /**
     * @return the number of token units a buyer gets per wei.
     */
    function rate() public view returns (uint256) {
        return _rate;
    }

    /**
     * @return the amount of wei raised.
     */
    function weiRaised() public view returns (uint256) {
        return _weiRaised;
    }

    /**
     * @dev low level token purchase ***DO NOT OVERRIDE***
     * This function has a non-reentrancy guard, so it shouldn't be called by
     * another `nonReentrant` function.
     * @param beneficiary Recipient of the token purchase
     */
    function buyTokens(address beneficiary) public nonReentrant payable {
        uint256 weiAmount = msg.value;
        _preValidatePurchase(beneficiary, weiAmount);

        // calculate token amount to be created
        uint256 tokens = _getTokenAmount(weiAmount);

        // update state
        _weiRaised = _weiRaised.add(weiAmount);

        _processPurchase(beneficiary, tokens);
        emit TokensPurchased(msg.sender, beneficiary, weiAmount, tokens);

        _updatePurchasingState(beneficiary, weiAmount);

        _forwardFunds();
        _postValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met.
     * Use `super` in contracts that inherit from Crowdsale to extend their validations.
     * Example from CappedCrowdsale.sol's _preValidatePurchase method:
     *     super._preValidatePurchase(beneficiary, weiAmount);
     *     require(weiRaised().add(weiAmount) <= cap);
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        require(beneficiary != address(0));
        require(weiAmount != 0);
    }

    /**
     * @dev Validation of an executed purchase. Observe state and use revert statements to undo rollback when valid
     * conditions are not met.
     * @param beneficiary Address performing the token purchase
     * @param weiAmount Value in wei involved in the purchase
     */
    function _postValidatePurchase(address beneficiary, uint256 weiAmount) internal view {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends
     * its tokens.
     * @param beneficiary Address performing the token purchase
     * @param tokenAmount Number of tokens to be emitted
     */
    function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
        _token.safeTransfer(beneficiary, tokenAmount);
    }

    /**
     * @dev Executed when a purchase has been validated and is ready to be executed. Doesn't necessarily emit/send
     * tokens.
     * @param beneficiary Address receiving the tokens
     * @param tokenAmount Number of tokens to be purchased
     */
    function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
        _deliverTokens(beneficiary, tokenAmount);
    }

    /**
     * @dev Override for extensions that require an internal state to check for validity (current user contributions,
     * etc.)
     * @param beneficiary Address receiving the tokens
     * @param weiAmount Value in wei involved in the purchase
     */
    function _updatePurchasingState(address beneficiary, uint256 weiAmount) internal {
        // solhint-disable-previous-line no-empty-blocks
    }

    /**
     * @dev Override to extend the way in which ether is converted to tokens.
     * @param weiAmount Value in wei to be converted into tokens
     * @return Number of tokens that can be purchased with the specified _weiAmount
     */
    function _getTokenAmount(uint256 weiAmount) internal view returns (uint256) {
        return weiAmount.mul(_rate);
    }

    /**
     * @dev Determines how ETH is stored/forwarded on purchases.
     */
    function _forwardFunds() internal {
        _wallet.transfer(msg.value);
    }
}

/**
 * @title TimedCrowdsale
 * @dev Crowdsale accepting contributions only within a time frame.
 */
contract TimedCrowdsale is Crowdsale {
    using SafeMath for uint256;

    uint256 private _openingTime;
    uint256 private _closingTime;

    /**
     * Event for crowdsale extending
     * @param newClosingTime new closing time
     * @param prevClosingTime old closing time
     */
    event TimedCrowdsaleExtended(uint256 prevClosingTime, uint256 newClosingTime);

    /**
     * @dev Reverts if not in crowdsale time range.
     */
    modifier onlyWhileOpen {
        require(isOpen());
        _;
    }

    /**
     * @dev Constructor, takes crowdsale opening and closing times.
     * @param openingTime Crowdsale opening time
     * @param closingTime Crowdsale closing time
     */
    constructor (uint256 openingTime, uint256 closingTime) public {
        // solhint-disable-next-line not-rely-on-time
        require(openingTime >= block.timestamp);
        require(closingTime > openingTime);

        _openingTime = openingTime;
        _closingTime = closingTime;
    }

    /**
     * @return the crowdsale opening time.
     */
    function openingTime() public view returns (uint256) {
        return _openingTime;
    }

    /**
     * @return the crowdsale closing time.
     */
    function closingTime() public view returns (uint256) {
        return _closingTime;
    }

    /**
     * @return true if the crowdsale is open, false otherwise.
     */
    function isOpen() public view returns (bool) {
        // solhint-disable-next-line not-rely-on-time
        return block.timestamp >= _openingTime && block.timestamp <= _closingTime;
    }

    /**
     * @dev Checks whether the period in which the crowdsale is open has already elapsed.
     * @return Whether crowdsale period has elapsed
     */
    function hasClosed() public view returns (bool) {
        // solhint-disable-next-line not-rely-on-time
        return block.timestamp > _closingTime;
    }

    /**
     * @dev Extend parent behavior requiring to be within contributing period
     * @param beneficiary Token purchaser
     * @param weiAmount Amount of wei contributed
     */
    function _preValidatePurchase(address beneficiary, uint256 weiAmount) internal onlyWhileOpen view {
        super._preValidatePurchase(beneficiary, weiAmount);
    }

    /**
     * @dev Extend crowdsale
     * @param newClosingTime Crowdsale closing time
     */
    function _extendTime(uint256 newClosingTime) internal {
        require(!hasClosed());
        require(newClosingTime > _closingTime);

        emit TimedCrowdsaleExtended(_closingTime, newClosingTime);
        _closingTime = newClosingTime;
    }
}

/**
 * @title FinalizableCrowdsale
 * @dev Extension of TimedCrowdsale with a one-off finalization action, where one
 * can do extra work after finishing.
 */
contract FinalizableCrowdsale is TimedCrowdsale {
    using SafeMath for uint256;

    bool private _finalized;

    event CrowdsaleFinalized();

    constructor () internal {
        _finalized = false;
    }

    /**
     * @return true if the crowdsale is finalized, false otherwise.
     */
    function finalized() public view returns (bool) {
        return _finalized;
    }

    /**
     * @dev Must be called after crowdsale ends, to do some extra finalization
     * work. Calls the contract's finalization function.
     */
    function finalize() public {
        require(!_finalized);
        require(hasClosed());

        _finalized = true;

        _finalization();
        emit CrowdsaleFinalized();
    }

    /**
     * @dev Can be overridden to add finalization logic. The overriding function
     * should call super._finalization() to ensure the chain of finalization is
     * executed entirely.
     */
    function _finalization() internal {
        // solhint-disable-previous-line no-empty-blocks
    }
}

/**
 * @title Secondary
 * @dev A Secondary contract can only be used by its primary account (the one that created it)
 */
contract Secondary {
    address private _primary;

    event PrimaryTransferred(
        address recipient
    );

    /**
     * @dev Sets the primary account to the one that is creating the Secondary contract.
     */
    constructor () internal {
        _primary = msg.sender;
        emit PrimaryTransferred(_primary);
    }

    /**
     * @dev Reverts if called from any account other than the primary.
     */
    modifier onlyPrimary() {
        require(msg.sender == _primary);
        _;
    }

    /**
     * @return the address of the primary.
     */
    function primary() public view returns (address) {
        return _primary;
    }

    /**
     * @dev Transfers contract to a new primary.
     * @param recipient The address of new primary.
     */
    function transferPrimary(address recipient) public onlyPrimary {
        require(recipient != address(0));
        _primary = recipient;
        emit PrimaryTransferred(_primary);
    }
}

/**
  * @title Escrow
  * @dev Base escrow contract, holds funds designated for a payee until they
  * withdraw them.
  * @dev Intended usage: This contract (and derived escrow contracts) should be a
  * standalone contract, that only interacts with the contract that instantiated
  * it. That way, it is guaranteed that all Ether will be handled according to
  * the Escrow rules, and there is no need to check for payable functions or
  * transfers in the inheritance tree. The contract that uses the escrow as its
  * payment method should be its primary, and provide public methods redirecting
  * to the escrow's deposit and withdraw.
  */
contract Escrow is Secondary {
    using SafeMath for uint256;

    event Deposited(address indexed payee, uint256 weiAmount);
    event Withdrawn(address indexed payee, uint256 weiAmount);

    mapping(address => uint256) private _deposits;

    function depositsOf(address payee) public view returns (uint256) {
        return _deposits[payee];
    }

    /**
     * @dev Stores the sent amount as credit to be withdrawn.
     * @param payee The destination address of the funds.
     */
    function deposit(address payee) public onlyPrimary payable {
        uint256 amount = msg.value;
        _deposits[payee] = _deposits[payee].add(amount);

        emit Deposited(payee, amount);
    }

    /**
     * @dev Withdraw accumulated balance for a payee.
     * @param payee The address whose funds will be withdrawn and transferred to.
     */
    function withdraw(address payable payee) public onlyPrimary {
        uint256 payment = _deposits[payee];

        _deposits[payee] = 0;

        payee.transfer(payment);

        emit Withdrawn(payee, payment);
    }
}

/**
 * @title ConditionalEscrow
 * @dev Base abstract escrow to only allow withdrawal if a condition is met.
 * @dev Intended usage: See Escrow.sol. Same usage guidelines apply here.
 */
contract ConditionalEscrow is Escrow {
    /**
     * @dev Returns whether an address is allowed to withdraw their funds. To be
     * implemented by derived contracts.
     * @param payee The destination address of the funds.
     */
    function withdrawalAllowed(address payee) public view returns (bool);

    function withdraw(address payable payee) public {
        require(withdrawalAllowed(payee));
        super.withdraw(payee);
    }
}

/**
 * @title RefundEscrow
 * @dev Escrow that holds funds for a beneficiary, deposited from multiple
 * parties.
 * @dev Intended usage: See Escrow.sol. Same usage guidelines apply here.
 * @dev The primary account (that is, the contract that instantiates this
 * contract) may deposit, close the deposit period, and allow for either
 * withdrawal by the beneficiary, or refunds to the depositors. All interactions
 * with RefundEscrow will be made through the primary contract. See the
 * RefundableCrowdsale contract for an example of RefundEscrow’s use.
 */
contract RefundEscrow is ConditionalEscrow {
    enum State { Active, Refunding, Closed }

    event RefundsClosed();
    event RefundsEnabled();

    State private _state;
    address payable private _beneficiary;

    /**
     * @dev Constructor.
     * @param beneficiary The beneficiary of the deposits.
     */
    constructor (address payable beneficiary) public {
        require(beneficiary != address(0));
        _beneficiary = beneficiary;
        _state = State.Active;
    }

    /**
     * @return the current state of the escrow.
     */
    function state() public view returns (State) {
        return _state;
    }

    /**
     * @return the beneficiary of the escrow.
     */
    function beneficiary() public view returns (address) {
        return _beneficiary;
    }

    /**
     * @dev Stores funds that may later be refunded.
     * @param refundee The address funds will be sent to if a refund occurs.
     */
    function deposit(address refundee) public payable {
        require(_state == State.Active);
        super.deposit(refundee);
    }

    /**
     * @dev Allows for the beneficiary to withdraw their funds, rejecting
     * further deposits.
     */
    function close() public onlyPrimary {
        require(_state == State.Active);
        _state = State.Closed;
        emit RefundsClosed();
    }

    /**
     * @dev Allows for refunds to take place, rejecting further deposits.
     */
    function enableRefunds() public onlyPrimary {
        require(_state == State.Active);
        _state = State.Refunding;
        emit RefundsEnabled();
    }

    /**
     * @dev Withdraws the beneficiary's funds.
     */
    function beneficiaryWithdraw() public {
        require(_state == State.Closed);
        _beneficiary.transfer(address(this).balance);
    }

    /**
     * @dev Returns whether refundees can withdraw their deposits (be refunded). The overridden function receives a
     * 'payee' argument, but we ignore it here since the condition is global, not per-payee.
     */
    function withdrawalAllowed(address) public view returns (bool) {
        return _state == State.Refunding;
    }
}

/**
 * @title RefundableCrowdsale
 * @dev Extension of FinalizableCrowdsale contract that adds a funding goal, and the possibility of users
 * getting a refund if goal is not met.
 *
 * Deprecated, use RefundablePostDeliveryCrowdsale instead. Note that if you allow tokens to be traded before the goal
 * is met, then an attack is possible in which the attacker purchases tokens from the crowdsale and when they sees that
 * the goal is unlikely to be met, they sell their tokens (possibly at a discount). The attacker will be refunded when
 * the crowdsale is finalized, and the users that purchased from them will be left with worthless tokens.
 */
contract RefundableCrowdsale is FinalizableCrowdsale {
    using SafeMath for uint256;

    // minimum amount of funds to be raised in weis
    uint256 private _goal;

    // refund escrow used to hold funds while crowdsale is running
    RefundEscrow private _escrow;

    /**
     * @dev Constructor, creates RefundEscrow.
     * @param goal Funding goal
     */
    constructor (uint256 goal) public {
        require(goal > 0);
        _escrow = new RefundEscrow(wallet());
        _goal = goal;
    }

    /**
     * @return minimum amount of funds to be raised in wei.
     */
    function goal() public view returns (uint256) {
        return _goal;
    }

    /**
     * @dev Investors can claim refunds here if crowdsale is unsuccessful
     * @param refundee Whose refund will be claimed.
     */
    function claimRefund(address payable refundee) public {
        require(finalized());
        require(!goalReached());

        _escrow.withdraw(refundee);
    }

    /**
     * @dev Checks whether funding goal was reached.
     * @return Whether funding goal was reached
     */
    function goalReached() public view returns (bool) {
        return weiRaised() >= _goal;
    }

    /**
     * @dev escrow finalization task, called when finalize() is called
     */
    function _finalization() internal {
        if (goalReached()) {
            _escrow.close();
            _escrow.beneficiaryWithdraw();
        } else {
            _escrow.enableRefunds();
        }

        super._finalization();
    }

    /**
     * @dev Overrides Crowdsale fund forwarding, sending funds to escrow.
     */
    function _forwardFunds() internal {
        _escrow.deposit.value(msg.value)(msg.sender);
    }
}

/**
 * @title PostDeliveryCrowdsale
 * @dev Crowdsale that locks tokens from withdrawal until it ends.
 */
contract PostDeliveryCrowdsale is TimedCrowdsale {
    using SafeMath for uint256;

    mapping(address => uint256) private _balances;

    /**
     * @dev Withdraw tokens only after crowdsale ends.
     * @param beneficiary Whose tokens will be withdrawn.
     */
    function withdrawTokens(address beneficiary) public {
        require(hasClosed());
        uint256 amount = _balances[beneficiary];
        require(amount > 0);
        _balances[beneficiary] = 0;
        _deliverTokens(beneficiary, amount);
    }

    /**
     * @return the balance of an account.
     */
    function balanceOf(address account) public view returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev Overrides parent by storing balances instead of issuing tokens right away.
     * @param beneficiary Token purchaser
     * @param tokenAmount Amount of tokens purchased
     */
    function _processPurchase(address beneficiary, uint256 tokenAmount) internal {
        _balances[beneficiary] = _balances[beneficiary].add(tokenAmount);
    }

}

/**
 * @title RefundablePostDeliveryCrowdsale
 * @dev Extension of RefundableCrowdsale contract that only delivers the tokens
 * once the crowdsale has closed and the goal met, preventing refunds to be issued
 * to token holders.
 */
contract RefundablePostDeliveryCrowdsale is RefundableCrowdsale, PostDeliveryCrowdsale {
    function withdrawTokens(address beneficiary) public {
        require(finalized());
        require(goalReached());

        super.withdrawTokens(beneficiary);
    }
}

contract RefundablePostDeliveryCrowdsaleImpl is RefundablePostDeliveryCrowdsale {
    constructor (
        uint256 openingTime,
        uint256 closingTime,
        uint256 rate,
        address payable wallet,
        IERC20 token,
        uint256 goal
    )
        public
        Crowdsale(rate, wallet, token)
        TimedCrowdsale(openingTime, closingTime)
        RefundableCrowdsale(goal)
    {
        // solhint-disable-previous-line no-empty-blocks
    }
}