diff --git a/components/esp_hw_support/linker.lf b/components/esp_hw_support/linker.lf
index e17a7c5aa61..468f03d4bae 100644
--- a/components/esp_hw_support/linker.lf
+++ b/components/esp_hw_support/linker.lf
@@ -43,3 +43,5 @@ entries:
         mspi_timing_config (noflash)
     if ADC_ONESHOT_CTRL_FUNC_IN_IRAM = y:
         sar_periph_ctrl (noflash)
+    else:
+        sar_periph_ctrl: sar_periph_ctrl_power_enable (noflash)
diff --git a/components/esp_hw_support/sleep_modes.c b/components/esp_hw_support/sleep_modes.c
index 95c6e828687..97f939000ba 100644
--- a/components/esp_hw_support/sleep_modes.c
+++ b/components/esp_hw_support/sleep_modes.c
@@ -385,8 +385,12 @@ static void IRAM_ATTR flush_uarts(void)
     }
 }
 
-static void IRAM_ATTR suspend_uarts(void)
+/**
+ * Suspend enabled uarts and return suspended uarts bit map
+ */
+static uint32_t IRAM_ATTR suspend_uarts(void)
 {
+    uint32_t suspended_uarts_bmap = 0;
     for (int i = 0; i < SOC_UART_NUM; ++i) {
 #ifndef CONFIG_IDF_TARGET_ESP32
         if (!periph_ll_periph_enabled(PERIPH_UART0_MODULE + i)) {
@@ -394,6 +398,7 @@ static void IRAM_ATTR suspend_uarts(void)
         }
 #endif
         uart_ll_force_xoff(i);
+        suspended_uarts_bmap |= BIT(i);
 #if SOC_UART_SUPPORT_FSM_TX_WAIT_SEND
         uint32_t uart_fsm = 0;
         do {
@@ -403,17 +408,16 @@ static void IRAM_ATTR suspend_uarts(void)
         while (uart_ll_get_fsm_status(i) != 0) {}
 #endif
     }
+    return suspended_uarts_bmap;
 }
 
-static void IRAM_ATTR resume_uarts(void)
+static void IRAM_ATTR resume_uarts(uint32_t uarts_resume_bmap)
 {
     for (int i = 0; i < SOC_UART_NUM; ++i) {
-#ifndef CONFIG_IDF_TARGET_ESP32
-        if (!periph_ll_periph_enabled(PERIPH_UART0_MODULE + i)) {
-            continue;
+        if (uarts_resume_bmap & 0x1) {
+            uart_ll_force_xon(i);
         }
-#endif
-        uart_ll_force_xon(i);
+        uarts_resume_bmap >>= 1;
     }
 }
 
@@ -478,6 +482,8 @@ static uint32_t IRAM_ATTR esp_sleep_start(uint32_t pd_flags, esp_sleep_mode_t mo
     // For deep sleep, wait for the contents of UART FIFO to be sent.
     bool deep_sleep = (mode == ESP_SLEEP_MODE_DEEP_SLEEP);
     bool should_skip_sleep = false;
+    uint32_t suspended_uarts_bmap = 0;
+
 
     if (deep_sleep) {
         flush_uarts();
@@ -488,7 +494,7 @@ static uint32_t IRAM_ATTR esp_sleep_start(uint32_t pd_flags, esp_sleep_mode_t mo
         } else
 #endif
         {
-            suspend_uarts();
+            suspended_uarts_bmap = suspend_uarts();
         }
     }
 
@@ -713,8 +719,7 @@ static uint32_t IRAM_ATTR esp_sleep_start(uint32_t pd_flags, esp_sleep_mode_t mo
     }
 
     // re-enable UART output
-    resume_uarts();
-
+    resume_uarts(suspended_uarts_bmap);
     return result;
 }