From d164df89de350aa945ccb0cb4261f56306bfdb3c Mon Sep 17 00:00:00 2001 From: Luca Burelli Date: Wed, 22 May 2024 12:59:07 +0200 Subject: [PATCH] fix: remove "programmer.default" from Nano ESP32 (#9666) Setting programmer.default has unfortunately multiple effects: - sets the tick by default in the Tool menu in the IDE (which was the expected behavior), - forces the CLI to use the specified programmer every time an upload is attempted (which is confusing users). For this reason, it is better to remove the "programmer.default" setting from the board definition and let the user choose the programmer in the IDE menus, as it was before. --- boards.txt | 1 - 1 file changed, 1 deletion(-) diff --git a/boards.txt b/boards.txt index 2af28bd93a5..b8110d6eeb5 100644 --- a/boards.txt +++ b/boards.txt @@ -35606,7 +35606,6 @@ nano_nora.debug.additional_config=debug_config.nano_nora nano_nora.tools.esptool_py.program.pattern_args=--chip {build.mcu} --port "{serial.port}" --before default_reset --after hard_reset write_flash -z --flash_mode {build.flash_mode} --flash_freq {build.flash_freq} --flash_size {build.flash_size} {build.bootloader_addr} "{build.path}/{build.project_name}.bootloader.bin" 0x8000 "{build.path}/{build.project_name}.partitions.bin" 0xe000 "{runtime.platform.path}/tools/partitions/boot_app0.bin" 0xf70000 "{build.variant.path}/extra/nora_recovery/nora_recovery.ino.bin" 0x10000 "{build.path}/{build.project_name}.bin" nano_nora.tools.esptool_py.erase.pattern_args=--chip {build.mcu} --port "{serial.port}" --before default_reset --after hard_reset erase_flash -nano_nora.programmer.default=esptool nano_nora.debug.executable= nano_nora.menu.PartitionScheme.default=With FAT partition (default)