WIFI reset

[bastos1505]

Hi guys, I'm using ESP12 and I'm facing a problem with wifi connection. I connected my ESP in my router and everything was ok up to my Set-Top-Box (that as well is connected in same router) be turned ON.
All the pins are OK and the VCC is very fine. I can't have a LOG because the ESP just resets.

The reset msg is: rst #1 (normal boot). There is no glitches in VCC. I measured with a scope and didn't see anything.

Facts:

• When I disconnect the ESP from my router, the problem doesn't happens;
• The problem just happens when my Set-Top-Box is booting;
• Even with a big data traffic, there's no problem;
• I can't have a LOG, because the ESP just resets;
• I'm using nodemcu 1.5.1 integer (Master) WIFI, UART, FILE, GPIO, HTTP, NODE, NET, TIMER.

[igrr]

You are using Nodemcu firmware? So you probably meant to open an issue at https://github.com/nodemcu/nodemcu-firmware/issues?