prusaslicer-lulzbot-taz

LulzBot TAZ printer and material profiles for use with PrusaSlicer.

Objective

This project intends to create standard LulzBot Taz printer profiles for use with PrusaSlicer. The profiles here are derived from the LulzBot Cura defaults with some modifications based on the behavior and style of PrusaSlicer configurations.

Supported Printers and Configurations

• LulzBot Taz 5 Single Extruder (0.50mm)
• LulzBot Taz 6 Single Extruder (0.50mm)
• LulzBot Taz Mini Single Extruder (0.50mm)
• LulzBot Taz Mini 2 Aero (0.50mm)

Installation

The configuration can be loaded as a configuration bundle through the PrusaSlicer interface. To import the file, select File > Import > Import Config Bundle ... and select the downloaded configuration file.

Notes

• Wipe temperatures for calibration use an expression based on the bed and nozzle temperature of the material. This gets reasonably close to correct wipe temperatures for common materials such as PLA. However, for materials with some higher printing temperatures don't precisely fit the curve.

  {temperature[0] * 0.848 + bed_temperature[0] * 0.135 - 36.8}
  

  To guarantee that the nozzle is clean, the print will pause following wipe and before probe in all Taz models capable of automatic probing. Probe temperature is fixed at 145 deg C.