Installing EmuFlight

How to install EmuFlight firmware on your FC:

Using EmuFlight Configurator, select the Firmware Flasher tab and select what firmware to flash in one of two different ways, online or local firmware.

1. Load online firmware.
   Select Target and Version in the upper left corner. Press "Load Firmware [Online]", lower right part of the screen.
2. Load local firmware.
   Press the "Load firmware [Local]" button, you can now browse to the folder you have the local EmuFlight firmware file. Select the correct firmware hex-file matching your Flight Controller.

Leaving all options unchecked ** (defaults) press "Flash firmware". The Configuration tool should now erase the target and flash the selected firmware to your Flight controller. All this assumes you have the correct drivers etc setup correctly, read further on for details.

If you are having trouble connecting to your flight controller:

In Progress