Skip to content

Latest commit

 

History

History

seat_service

README.md

Seat Service Example

Overview

This represents the example seat control service. More elaborate or completely differing implementations are target of particular projects providing a vehicle abstraction layer.

Context

SeatService_context

Internals

SeatService_internal

Development environment

Building/testing in Github codespaces

For aarch64 hosts or for quickly testing a pull request it is easier to use Github codespaces.

  • Create a codespace from here
  • Choose: Configure and create codespace
  • Choose a branch to run on. If you just see main and need to test a PR, you can select Files changed in the PR, then Review in codespace
  • Wait several minutes for building codespace devcontainer.
  • If everything is OK, you'll see several vscode tasks running sequentially (e.g run-<component>)
  • run-seatservice will build the Seat Service from sources using build-release.sh
  • If you need to start another vscode task / or stop them all, use F1, Tasks: Run Task, select desired task
  • There are 2 integration-test tasks for testing local versions or released containers

Local development

Prerequisites

Most existing build scripts rely on that you have Docker installed. Some scripts also assumes that you use Ubuntu 22.04 as development environment, by for example building binaries locally and then copying to a docker environment based on Ubuntu 22.04. Conan config is setup to verify gcc-version against configuration in toolchains.

  1. Install and configure (if needed) local authentication proxy e.g. CNTLM or Px
  2. Install and configure docker: Get Docker

Some hints if you want to update to a different environment and not change overall architecture

  1. Select the new Debian version to use
  2. Update base-image accordingly in all Dockerfile and in repo .github/workflows for seat service.
  3. Check default gccversion in that Ubuntu version and update version in files in toolchains.

Usage on CLI

NOTE: Building Seat Service on aarch64 host is not supported at the moment.

Building on Ubuntu 22.04

You can use dedicated build docker script docker-build.sh if host environment matches target (Ubuntu 20.04). Note that you may need to install dependencies - use .devcontainer/Dockerfile as reference.

# Linux: [Ubuntu 20.04]
./seat_service/docker-build.sh

USAGE: ./docker-build.sh [OPTIONS] TARGETS
Standalone build helper for seat_service docker image.

OPTIONS:
  -l, --local      local docker import (does not export tar)
  -v, --verbose    enable plain docker output and disable cache
      --help       show help

TARGETS:
  x86_64|amd64, aarch64|amd64    Target arch to build for, if not set - defaults to multiarch
Creating Docker container for build

If you are using different distro / version, you may use the devcontainer to compile seat service binaries. First build the Docker container

$ cd seat_service/.devcontainer
$ docker build -f Dockerfile -t seat_service_env:latest .

From the seat_service folder, use Docker like below where <build-command>is the command you intend to run

cd seat_service

# Linux: [x86_64, any version]
docker run --rm -it -v $(pwd):/workspace seat_service_env:latest <build-command>

# Windows (cmd)
docker run --rm -it -v %cd%:/workspace seat_service_env:latest <build-command>

# Windows (Powershell)
docker run --rm -it -v ${PWD}:/workspace seat_service_env:latest <build-command>
Build Seat Service binaries

Building the seat service via dev container must be triggered from the seat_service root folder, e.g.:

# Linux

cd seat_service

# Cleanup any build artifacts
rm -rf bin_vservice-seat_*.tar.gz target/

# Generate bin_vservice-seat_*.tar.gz files for packing seat service container
docker run --rm -it -v $(pwd):/workspace seat_service_env:latest /bin/bash -c \
  "./build-release.sh --pack"

# Check if release package is build
ls -la bin_vservice-seat_*.tar.gz

It shall now be possible to start the service

$ docker run --rm -it -v $(pwd):/workspace seat_service_env:latest target/x86_64/release/install/bin/seat_service
Usage: target/x86_64/release/install/bin/seat_service CAN_IF_NAME [LISTEN_ADDRESS [PORT]]

Environment: SEAT_DEBUG=1 to enable SeatDataFeeder dumps
Build Seat Service container

Build the container using pre-built binaries: seat_service/bin_vservice-seat_*.tar.gz

# Linux
ce seat_service
docker build -t seat_service -f Dockerfile .

Usage in Visual Studio Code

It is also possible to open the seat_service directory as a remote container in VScode using the approach Developing inside a Container. All needed tools for VScode are automatically installed in this case

  1. Install VScode extension with ID ms-vscode-remote.remote-containers
  2. Hit F1 and type Remote-Containers: Reopen in Container
root@aeefe5ca40f5:/workspaces/incubation3/seat_service# ./build-release.sh
root@aeefe5ca40f5:/workspaces/incubation3/seat_service# target/x86_64/release/install/bin/seat_service 
Usage: target/x86_64/release/install/bin/seat_service CAN_IF_NAME [LISTEN_ADDRESS [PORT]]

Environment: SEAT_DEBUG=1 to enable SeatDataFeeder dumps

Configuration

Command line arguments

./seat_service can_if_name [listen_address [listen_port]]
cli parameter default value description
can_if_name - Use socketCAN device
listen_address "localhost" Listen address for grpc calls
listen_port 50051 Listen port for grpc calls

Environment variables

Environment variable default value description
BROKER_ADDR "localhost:55555" Connect to databroker host:port
VSS 4 VSS compatibility mode [3, 4]
DAPR_GRPC_PORT 55555 Dapr mode: override databroker port replacing port value in $BROKER_ADDR
VEHICLEDATABROKER_DAPR_APP_ID "vehicledatabroker" Dapr app id for databroker
SEAT_DEBUG 1 Seat Service debug: 0=ERR, 1=INFO, ...
DBF_DEBUG 1 DatabrokerFeeder debug: 0=ERR, 1=INFO, ...

Entrypoint script variables

There is dedicated entry point script val_start.sh that runs seat service with additional Environment variable configuration:

Environment variable default value description
CAN "can0" Overrides can_if_name cli argument
SERVICE_HOST "0.0.0.0" Overrides listen_address cli argument
SERVICE_PORT 50051 Overrides listen_port cli argument
SC_RESET - If != "0", executes ecu-reset script to calibrate seat motors

NOTE: Check val_start.sh script comments for less-important Environment variables.

Seat Controller configuration

Further configuration of the seat controller see Seat Controller Documentation.

Seat Controller Documentation

Seat Controller module handles SocketCAN messaging and provides Control Loop for moving a seat to desired position. It also provides cansim module for simulating a HW Seat ECU even without vcan support (e.g. CI pipeline).

For more details about Seat Controller, Seat CAN Simulator and related tools, check SeatController README

Generate documentation

  • Run Doxygen: doxygen is able to run with the following command from the main directory:

    doxygen ./docs/doxygen/doxyfile

    or using:

    build-docu.sh

  • The output will be stored to ./docs/out. You can watch the documentation with open the following file in the browser: ./docs/doxygen/out/html/index.html

KUKSA.val and VSS version dependency

The service examples and related tests in this repository use VSS signals. VSS signals may change over time, and backward incompatible changes may be introduced as part of major releases. Some of the tests in this repository relies on using latest version of KUKSA.val Databroker and KUKSA CAN Provider. Some code in the repository (like Proto definitions) have been copied from KUKSA.val.

This means that regressions may occur when KUKSA.val or KUKSA.val Feeders are updated. The intention for other KUKSA.val repositories is to use the latest official VSS release as default. There is a script for manual updating of KUKSA.val proto files: update-protobuf.sh.

cd integration_test/
./update-protobuf.sh --force

Seat Service currently supports 2 modes: (VSS 3.X and 4.0). As part of VSS 4.0 the instance scheme for seat positions was changed to be based on DriverSide/Middle/PassengerSide rather than Pos1, Pos2, Pos3.

By default Seat Service uses VSS 4.0 seat position, but for older dependencies it can be changed to VSS 3.X compatible by setting Environment variable VSS=3 for seat service container / cmdline.

Known locations where an explicit VSS or KUKSA.val version is mentioned

  • In integration_test.yml Uncomment the following line to force VSS 3.X version support in databroker. # KDB_OPT: "--vss vss_release_3.1.1.json"

  • In run-databroker.sh The script gets both VSS3 and 4 json files from KUKSA.val master and starts databroker with the correct version, based on environment variable USE_VSS3=1:

    wget -q "https://raw.githubusercontent.com/eclipse/kuksa.val/master/data/vss-core/vss_release_3.0.json" -O "$DATABROKER_BINARY_PATH/vss3.json"
wget -q "https://raw.githubusercontent.com/eclipse/kuksa.val/master/data/vss-core/vss_release_4.0.json" -O "$DATABROKER_BINARY_PATH/vss4.json"

  • In prerequisite_settings.json hardcoded versions are mentioned for KUKSA.val Databroker, KUKSA.val DBC Feeder and KUKSA.val Client.

  • In test_val_seat.py. Tests for proper seat position datapoint, according to environment variable USE_VSS3.

  • In Seat Service main.cc: 2 different Datapoint sets are registered, based on environment variable VSS (3 or 4).

NOTE: Above mentioned locations should be checked for breaking VSS changes on master.