Skip to content

Latest commit

 

History

History

std

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
src
src
 
 
Cargo.lock
Cargo.lock
 
 
Cargo.toml
Cargo.toml
 
 
README.adoc
README.adoc
 
 

README.adoc

std esp8266 example

This example demonstrates using a driver written for embedded on a standard computer with a module attached to a USB-to-Serial cable.

The application runs out of the box on a PC with a ESP8266 breakout module flashed with AT firmware attached using a USB-to-Serial cable.

Prerequisites

Hardware

  • USB to Serial cable

  • ESP8266 module with AT-command firmware version 1.7.x or newer.

Software

  • To build the example, you need to have rustup.

  • A TCP server (ncat) or a service like Drogue IoT Cloud. See drogue-cloud for how to run that, or use the sandbox (requires TLS).

Configuring

Credentials for your local WiFi network will come from these entries in ~/.drogue/config.toml:

wifi-ssid = "..."
wifi-password = "..."

HTTP authentication will come from these entries in ~/.drogue/config.toml:

http-username = "..."
http-password = "..."

For Drogue IoT Cloud, the username/password is stored in this form: device_id@application.

Running with plain TCP

You can configure the IP constant to point to any HTTP server to receive events, or you can use drogue cloud locally. For simplicity, start a local HTTP server in python that echoes the HTTP payload back:

curl -s https://raw.githubusercontent.com/drogue-iot/drogue-device/main/apps/wifi/server.py | python3

To run the firmware:

cargo run --release

The application will wait until the ESP8266 is reset, some breakout modules provide a reset button, others require you to power the ESP8266 separately from the serial cable in order to proberly reset.

Once reset, the application will connect to the WiFi access point and send a test message from your device.

Running with TLS

When the tls flag is enabled, the example is configured to use the Drogue IoT Cloud sandbox. To use this example with your own Drogue IoT Cloud instance, you need to edit the HOST and PORT constants in src/main.rs.

To run the firmware:

cargo +nightly run --release --features tls

The application will wait until the ESP8266 is reset, some breakout modules provide a reset button, others require you to power the ESP8266 separately from the serial cable in order to proberly reset.

Once reset, the application will connect to the WiFi access point and send a test message from your device.