AVATTO ZWSM16-2-Zigbee

[LeoeLeoeL]

Is there already an existing issue for this?

• I have searched the existing issues and there is none for my device

Product name

AVATTO ZWSM16-2-Zigbee

Manufacturer

_TZ3000_mtnpt6ws

Model identifier

TS0002

Device type to add

Light

Node info

Endpoints and clusters

Basic

Further relevant clusters

Power Configuration

On/Off

Level Control

Color Control

Thermostat

Simple Metering

Electrical Measurement

Any other cluster of relevance/interest

[LeoeLeoeL]

If I set ON light 10 , light 11 switches to ON too.

[SirBarkAlot]

i have one to, if there is support i would realy love it
if you would need somone to test it
PM me

[LeoeLeoeL]

I have 4 of them.
2 are paired to zigbee2Mqtt and work OK.

I think the energy meter is disabled by firmware

[LeoeLeoeL]

Is there any "work in progress" regarding this device?
I need to buy and install 2 more.

[github-actions]

As there has not been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.

[LeoeLeoeL]

It could be a good thing to integrate this device because is not expensive.

[Mimiix]

@Smanar Can you take a look if you have time :)?

[Smanar]

Hello can you try this DDF

{
  "schema": "devcap1.schema.json",
  "manufacturername": [
    "_TZ3000_zmy4lslw",
    "_TZ3000_lmlsduws",
    "_TZ3000_mtnpt6ws",
    "_TZ3000_nuenzetq"
  ],
  "modelid": [
   "TS0002",
   "TS0002",
   "TS0002",
   "TS0002"
  ],
  "product": "Tuya 2 output module",
  "sleeper": false,
  "status": "Gold",
  "subdevices": [
    {
      "type": "$TYPE_ON_OFF_OUTPUT",
      "restapi": "/lights",
      "uuid": [
        "$address.ext",
        "0x01"
      ],
      "items": [
        {
          "name": "attr/id"
        },
        {
          "name": "attr/lastannounced"
        },
        {
          "name": "attr/lastseen"
        },
        {
          "name": "attr/manufacturername"
        },
        {
          "name": "attr/modelid"
        },
        {
          "name": "attr/name"
        },
        {
          "name": "attr/swversion",                   
          "refresh.interval": 86400,
          "parse": {"fn": "zcl:attr", "ep": 1, "cl": "0x0000", "at": "0x0001", "script": "tuya_swversion.js"},
          "read": {"fn": "zcl:attr", "ep": 1, "cl": "0x0000", "at": "0x0001"}
        },
        {
          "name": "attr/type"
        },
        {
          "name": "attr/uniqueid"
        },
        {
          "name": "state/on"
        },
        {
          "name": "state/reachable"
        },
        {
          "name": "config/tuya_unlock"
        }
      ]
    },
    {
      "type": "$TYPE_ON_OFF_OUTPUT",
      "restapi": "/lights",
      "uuid": [
        "$address.ext",
        "0x02"
      ],
      "items": [
        {
          "name": "attr/id"
        },
        {
          "name": "attr/lastannounced"
        },
        {
          "name": "attr/lastseen"
        },
        {
          "name": "attr/manufacturername"
        },
        {
          "name": "attr/modelid"
        },
        {
          "name": "attr/name"
        },
        {
          "name": "attr/swversion",                   
          "refresh.interval": 86400,
          "parse": {"fn": "zcl:attr", "ep": 1, "cl": "0x0000", "at": "0x0001", "script": "tuya_swversion.js"},
          "read": {"fn": "zcl:attr", "ep": 1, "cl": "0x0000", "at": "0x0001"}
        },
        {
          "name": "attr/type"
        },
        {
          "name": "attr/uniqueid"
        },
        {
          "name": "state/on"
        },
        {
          "name": "state/reachable"
        }
      ]
    }
  ]
}

Or if you want, just edit this DDF devices\tuya_TZ3000_2channel_module.json

You need to re-include the DDF after that, because the tuya unlock sequence is done at inclusion or every 24h (you can wait 24h too)

[LeoeLeoeL]

It has been impossible to load your DDF so I copied your items (violet, blue and green) and generated this one:

{
"schema": "devcap1.schema.json",
"manufacturername": "_TZ3000_mtnpt6ws",
"modelid": "TS0002",
"product": "TS0002",
"sleeper": false,
"status": "Gold",
"subdevices": [
{
"type": "$TYPE_ON_OFF_OUTPUT",
"restapi": "/lights",
"uuid": [
"$address.ext",
"0x01"
],
"items": [
{
"name": "attr/id"
},
{
"name": "attr/lastannounced"
},
{
"name": "attr/lastseen"
},
{
"name": "attr/manufacturername"
},
{
"name": "attr/modelid"
},
{
"name": "attr/name"
},
{
"name": "attr/swversion"
},
{
"name": "attr/type"
},
{
"name": "attr/uniqueid"
},
{
"name": "config/tuya_unlock",
"public": false,
"description": "Tuya sequence to unlock some device.",
"refresh.interval": 86400,
"default": false
},
{
"name": "state/on",
"description": "True when device is on; false when off.",
"refresh.interval": 5
},
{
"name": "state/reachable"
}
]
},
{
"type": "$TYPE_ON_OFF_OUTPUT",
"restapi": "/lights",
"uuid": [
"$address.ext",
"0x01"
],
"items": [
{
"name": "attr/id"
},
{
"name": "attr/lastannounced"
},
{
"name": "attr/lastseen"
},
{
"name": "attr/manufacturername"
},
{
"name": "attr/modelid"
},
{
"name": "attr/name"
},
{
"name": "attr/swversion"
},
{
"name": "attr/type"
},
{
"name": "attr/uniqueid"
},
{
"name": "state/on",
"description": "True when device is on; false when off.",
"refresh.interval": 5
},
{
"name": "state/reachable"
}
]
}
]
}

Now the two ON/OFF switches are separated; If I switch on number 1 the number 2 stays off.
Too much easy. What's the catch?

[LeoeLeoeL]

I successfully overwrote your DDF over the mine and works.

[Smanar]

So it mean the first DDF is working ?
Can add your device to the previous DDF officialy ?

[LeoeLeoeL]

Both DDF work but I'm using yor DDF because I think it's better.
My DDF has something strange for me:
...
{
"type": "$TYPE_ON_OFF_OUTPUT",
"restapi": "/lights",
"uuid": [
"$address.ext",
"0x01"
...
{
"type": "$TYPE_ON_OFF_OUTPUT",
"restapi": "/lights",
"uuid": [
"$address.ext",
"0x01"
],
...
while yours has
...
{
"type": "$TYPE_ON_OFF_OUTPUT",
"restapi": "/lights",
"uuid": [
"$address.ext",
"0x01"
],
...
{
"type": "$TYPE_ON_OFF_OUTPUT",
"restapi": "/lights",
"uuid": [
"$address.ext",
"0x02"
],
...
My DDF doesn't have 0x02 for the 2nd switch. Is it normal?

[Smanar]

My DDF doesn't have 0x02 for the 2nd switch. Is it normal?

No ^^.
It's the endpoint, it's the number on title node, on your you have "01" "02 "F2", 0x01 is for the first gand and 0x02 for the second one.
So strange your DDF are working ....

BTW have added the device here #7712

[LeoeLeoeL]

Thank you