From ce3cadac11a99bfb8ad9c572b5d1de455e235cd0 Mon Sep 17 00:00:00 2001 From: Foxies Date: Sun, 29 Nov 2020 14:32:27 +0100 Subject: [PATCH] Delete PS-2.3.0.a4_config-PLA_FLSUN_QQS-v1.ini.ini --- ...S-2.3.0.a4_config-PLA_FLSUN_QQS-v1.ini.ini | 250 ------------------ 1 file changed, 250 deletions(-) delete mode 100644 Marlin/Slicers/PS-2.3.0.a4_config-PLA_FLSUN_QQS-v1.ini.ini diff --git a/Marlin/Slicers/PS-2.3.0.a4_config-PLA_FLSUN_QQS-v1.ini.ini b/Marlin/Slicers/PS-2.3.0.a4_config-PLA_FLSUN_QQS-v1.ini.ini deleted file mode 100644 index d31616e06c06..000000000000 --- a/Marlin/Slicers/PS-2.3.0.a4_config-PLA_FLSUN_QQS-v1.ini.ini +++ /dev/null @@ -1,250 +0,0 @@ -# generated by PrusaSlicer 2.3.0-alpha4+win64 on 2020-11-28 at 14:20:54 UTC -avoid_crossing_perimeters = 0 -bed_custom_model = -bed_custom_texture = -bed_shape = 129.505x11.3302,128.025x22.5743,125.57x33.6465,122.16x44.4626,117.82x54.9404,112.583x65,106.49x74.5649,99.5858x83.5624,91.9239x91.9239,83.5624x99.5858,74.5649x106.49,65x112.583,54.9404x117.82,44.4626x122.16,33.6465x125.57,22.5743x128.025,11.3302x129.505,7.9602e-15x130,-11.3302x129.505,-22.5743x128.025,-33.6465x125.57,-44.4626x122.16,-54.9404x117.82,-65x112.583,-74.5649x106.49,-83.5624x99.5858,-91.9239x91.9239,-99.5858x83.5624,-106.49x74.5649,-112.583x65,-117.82x54.9404,-122.16x44.4626,-125.57x33.6465,-128.025x22.5743,-129.505x11.3302,-130x1.59204e-14,-129.505x-11.3302,-128.025x-22.5743,-125.57x-33.6465,-122.16x-44.4626,-117.82x-54.9404,-112.583x-65,-106.49x-74.5649,-99.5858x-83.5624,-91.9239x-91.9239,-83.5624x-99.5858,-74.5649x-106.49,-65x-112.583,-54.9404x-117.82,-44.4626x-122.16,-33.6465x-125.57,-22.5743x-128.025,-11.3302x-129.505,-2.38806e-14x-130,11.3302x-129.505,22.5743x-128.025,33.6465x-125.57,44.4626x-122.16,54.9404x-117.82,65x-112.583,74.5649x-106.49,83.5624x-99.5858,91.9239x-91.9239,99.5858x-83.5624,106.49x-74.5649,112.583x-65,117.82x-54.9404,122.16x-44.4626,125.57x-33.6465,128.025x-22.5743,129.505x-11.3302,130x-3.18408e-14 -bed_temperature = 60 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -between_objects_gcode = -bottom_fill_pattern = rectilinear -bottom_solid_layers = 4 -bottom_solid_min_thickness = 0 -bridge_acceleration = 0 -bridge_angle = 0 -bridge_fan_speed = 100 -bridge_flow_ratio = 0.95 -bridge_speed = 25 -brim_width = 0 -clip_multipart_objects = 1 -color_change_gcode = M600 -colorprint_heights = -compatible_printers_condition_cummulative = ;"! (printer_notes=~/.*PRINTER_VENDOR_*/ and printer_notes=~/.*PRINTER_MODEL_*/ and single_extruder_multi_material)" -complete_objects = 0 -cooling = 1 -cooling_tube_length = 5 -cooling_tube_retraction = 91.5 -default_acceleration = 0 -default_filament_profile = "Generic PLA @QQS" -default_print_profile = 0.20mm QUALITY @QQS -deretract_speed = 40 -disable_fan_first_layers = 1 -dont_support_bridges = 1 -draft_shield = 0 -duplicate_distance = 6 -elefant_foot_compensation = 0 -end_filament_gcode = "; Filament-specific end gcode" -end_gcode = ; printing object ENDGCODE\nG92 E0.0 ; prepare to retract\nG1 E-6 F3000; retracter pour eviter les fils d'ange\n\n; Anti-stringing end wiggle\n{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Souleve la tete de 100mm au-dessus de l'objet\nG1 X0 Y120 F3000 ; present print\nM150 P U255 ; Set NeoPixel Green\n\n; Reset print setting overrides\nG92 E0\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extruder factor to 100%\nM900 K0 ; reset linear acceleration\n\n; Arret de l'imprimante\nM104 S0 ; arret temperature\nM140 S0 ; arret chauffe plateau\nM107 ; Arret ventilos\nM18 S180 ;M84 ; arret des servo-moteurs apres 3 mn\nM300 S40 P10 ; Bip\nM117 Fin d'impression. -ensure_vertical_shell_thickness = 1 -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 80 -external_perimeters_first = 0 -extra_loading_move = -2 -extra_perimeters = 0 -extruder_clearance_height = 25 -extruder_clearance_radius = 45 -extruder_colour = #FFFF00 -extruder_offset = 0x0 -extrusion_axis = E -extrusion_multiplier = 1 -extrusion_width = 0.4 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #F9B006 -filament_cooling_final_speed = 3.4 -filament_cooling_initial_speed = 2.2 -filament_cooling_moves = 4 -filament_cost = 28.99 -filament_density = 1.24 -filament_deretract_speed = nil -filament_diameter = 1.74 -filament_load_time = 0 -filament_loading_speed = 28 -filament_loading_speed_start = 3 -filament_max_volumetric_speed = 15 -filament_minimal_purge_on_wipe_tower = 15 -filament_notes = "List of materials tested with standard PLA print settings:\n\nEryone PLA Glitter\n" -filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" -filament_retract_before_travel = nil -filament_retract_before_wipe = nil -filament_retract_layer_change = nil -filament_retract_length = nil -filament_retract_lift = nil -filament_retract_lift_above = nil -filament_retract_lift_below = nil -filament_retract_restart_extra = nil -filament_retract_speed = nil -filament_settings_id = "ERYONE PLA Glitter @QQS" -filament_soluble = 0 -filament_spool_weight = 0 -filament_toolchange_delay = 0 -filament_type = PLA -filament_unload_time = 0 -filament_unloading_speed = 90 -filament_unloading_speed_start = 100 -filament_vendor = (Unknown) -filament_wipe = nil -fill_angle = 45 -fill_density = 30% -fill_pattern = rectilinear -first_layer_acceleration = 0 -first_layer_bed_temperature = 60 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 25 -first_layer_temperature = 220 -gap_fill_speed = 120 -gcode_comments = 0 -gcode_flavor = marlin -gcode_label_objects = 1 -high_current_on_filament_swap = 0 -host_type = octoprint -infill_acceleration = 0 -infill_anchor = 1000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 85 -interface_shells = 0 -ironing = 0 -ironing_flowrate = 15% -ironing_spacing = 0.1 -ironing_speed = 15 -ironing_type = top -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\nG4 P1;Octolapse -layer_height = 0.25 -machine_limits_usage = emit_to_gcode -machine_max_acceleration_e = 3000 -machine_max_acceleration_extruding = 1000 -machine_max_acceleration_retracting = 1000 -machine_max_acceleration_x = 3000 -machine_max_acceleration_y = 3000 -machine_max_acceleration_z = 3000 -machine_max_feedrate_e = 200 -machine_max_feedrate_x = 250 -machine_max_feedrate_y = 250 -machine_max_feedrate_z = 250 -machine_max_jerk_e = 5 -machine_max_jerk_x = 10 -machine_max_jerk_y = 10 -machine_max_jerk_z = 10 -machine_min_extruding_rate = 0 -machine_min_travel_rate = 0 -max_fan_speed = 90 -max_layer_height = 0.3 -max_print_height = 361 -max_print_speed = 150 -max_volumetric_speed = 0 -min_fan_speed = 50 -min_layer_height = 0.08 -min_print_speed = 15 -min_skirt_length = 4 -notes = 20201120 -nozzle_diameter = 0.4 -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = {printer_model}_{filament_type[0]}_{layer_height}mm _ {input_filename_base}.gcode -overhangs = 1 -parking_pos_retraction = 92 -pause_print_gcode = M601 -perimeter_acceleration = 0 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 85 -perimeters = 3 -post_process = -print_host = -print_settings_id = 0.25mm OPTIMISE @QQS -printer_model = AKLP -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_QQS\nPRINTER_HAS_BOWDEN\n -printer_settings_id = FLSun - QQS-Pro_v1 -printer_technology = FFF -printer_variant = 0.4 -printer_vendor = -printhost_apikey = -printhost_cafile = -raft_layers = 0 -remaining_times = 1 -resolution = 0 -retract_before_travel = 2 -retract_before_wipe = 70% -retract_layer_change = 1 -retract_length = 5 -retract_length_toolchange = 1 -retract_lift = 0.6 -retract_lift_above = 0 -retract_lift_below = 0 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 -retract_speed = 60 -seam_position = nearest -silent_mode = 0 -single_extruder_multi_material = 0 -single_extruder_multi_material_priming = 1 -skirt_distance = 4 -skirt_height = 1 -skirts = 1 -slice_closing_radius = 0.049 -slowdown_below_layer_time = 20 -small_perimeter_speed = 25 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 50 -spiral_vase = 0 -standby_temperature_delta = -5 -start_filament_gcode = "; Filament gcode\n;M420 L0;Chargement nivellement Bed 60C\nM900 K0;,22;{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}0.2{endif};Filament gcode" -start_gcode = ;STARTGCODE\nM117 Initialisation\n;M150 P R255 B255 U255 ; Set NeoPixel White\n; Reglage des coordonnees\nG90 ; se met en coordonnees absolues\nM83 ; extruder relative mode\n\n; Reset vitesse et de l'extrusion\nM200 D0 ; disable volumetric E\nM220 S100 ; initialisation vitesse a 100mm/s\n\n; Cycle initiale de prechauffe\nM117 Lancement PreChauffe\nM150 P R255 ; Set NeoPixel Red\nM104 S{first_layer_temperature[0]-40} ; lance la temp de la buse a 40 de moins pour prevenir l'ecoulement en continue.\nM140 S[first_layer_bed_temperature] ; lance la temp. plateau, continue on\nM109 S{first_layer_temperature[0]-40} ; attente la temp. d'extrusion\nM190 S[first_layer_bed_temperature] ; attente la temp. du plateau\nM300 S40 P10 ; Bip\n\n; Initialisation des axes (Home)\nM117 Initialisation Axes\nG28 ; Initialisation des axes sans nivellement\n;M420 S1\n\n; Cycle final de prechauffe\nM117 Chauffe finale\nM140 S[first_layer_bed_temperature] ; lance la temperature finale du plateau\nM104 S[first_layer_temperature] ; Lance la temperature finale de l'extrudeur\nM109 S[first_layer_temperature] ; attente temperature finale de l'extrudeur\nM190 S[first_layer_bed_temperature] ; attente temperature finale du plateau\nM300 S440 P200 ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250 ; wait between dual beep\nM300 S440 P200 ; 2nd beep for printer ready\nG4 S10 ; wait to clean the nozzle\nM300 S440 P200 ; 3rd beep for ready to start printing\n\n; Cycle ligne d'intro\nM117 Impression ligne d'intro\nM900 K0; Desactive fct Linear Advance pour la ligne d'intro\nG92 E0.0 ; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0\nG1 F1000\nG1 X-52.931 Y-96.185 E0.300\nG1 X-50.985 Y-97.231 E0.331\nG1 X-49.018 Y-98.238 E0.331\nG1 X-47.032 Y-99.205 E0.331\nG1 X-45.026 Y-100.132 E0.331\nG1 X-43.003 Y-101.019 E0.331\nG1 X-40.961 Y-101.864 E0.331\nG1 X-38.904 Y-102.668 E0.331\nG1 X-36.83 Y-103.431 E0.331\nG1 X-34.742 Y-104.152 E0.331\nG1 X-32.639 Y-104.83 E0.331\nG1 X-30.523 Y-105.466 E0.331\nG1 X-28.395 Y-106.06 E0.331\nG1 X-26.255 Y-106.61 E0.331\nG1 X-24.105 Y-107.117 E0.331\nG1 X-21.945 Y-107.581 E0.331\nG1 X-19.776 Y-108.001 E0.331\nG1 X-17.599 Y-108.377 E0.331\nG1 X-15.415 Y-108.71 E0.331\nG1 X-13.224 Y-108.998 E0.331\nG1 X-11.028 Y-109.242 E0.331\nG1 X-8.828 Y-109.442 E0.331\nG1 X-6.624 Y-109.598 E0.331\nG1 X-4.418 Y-109.709 E0.331\nG1 X-2.209 Y-109.776 E0.332\nG1 X0 Y-109.798 E0.331\nG1 X2.209 Y-109.776 E0.690\nG1 X4.418 Y-109.709 E0.691\nG1 X6.624 Y-109.598 E0.690\nG1 X8.828 Y-109.442 E0.690\nG1 X11.028 Y-109.242 E0.690\nG1 X13.224 Y-108.998 E0.690\nG1 X15.415 Y-108.71 E0.691\nG1 X17.599 Y-108.377 E0.690\nG1 X19.776 Y-108.001 E0.690\nG1 X21.945 Y-107.581 E0.690\nG1 X24.105 Y-107.117 E0.690\nG1 X26.255 Y-106.61 E0.690\nG1 X28.395 Y-106.06 E0.690\nG1 X30.523 Y-105.466 E0.690\nG1 X32.639 Y-104.83 E0.690\nG1 X34.742 Y-104.152 E0.690\nG1 X36.83 Y-103.431 E0.690\nG1 X38.904 Y-102.668 E0.691\nG1 X40.961 Y-101.864 E0.690\nG1 X43.003 Y-101.019 E0.691\nG1 X45.026 Y-100.132 E0.690\nG1 X47.032 Y-99.205 E0.691\nG1 X49.018 Y-98.238 E0.690\nG1 X50.985 Y-97.231 E0.691\nG1 X52.931 Y-96.185 E0.690\nG1 X54.672 Y-95.203 E0.625\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\nM150 P255 R255 B255 U255; Set NeoPixel White\n\n;Mode TMC\n;M913 X150 Y150 Z150 ; Reglage limit Hybrid TMC \n;M569 S1 X Y Z ; mode stealthshop(silent)\n;M569 S0 Z E\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nM117 Impression [input_filename] -support_material = 1 -support_material_angle = 0 -support_material_auto = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.3 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.38 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 40 -support_material_synchronize_layers = 0 -support_material_threshold = 55 -support_material_with_sheath = 0 -support_material_xy_spacing = 50% -temperature = 215 -template_custom_gcode = -thin_walls = 0 -threads = 8 -thumbnails = 32x32,260x260 -toolchange_gcode = -top_fill_pattern = rectilinear -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 40 -top_solid_layers = 5 -top_solid_min_thickness = 0 -travel_speed = 150 -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 1 -wipe = 1 -wipe_into_infill = 0 -wipe_into_objects = 0 -wipe_tower = 0 -wipe_tower_bridging = 10 -wipe_tower_no_sparse_layers = 0 -wipe_tower_rotation_angle = 0 -wipe_tower_width = 60 -wipe_tower_x = 170 -wipe_tower_y = 140 -wiping_volumes_extruders = 70,70 -wiping_volumes_matrix = 0 -xy_size_compensation = 0 -z_offset = 0