Skip to content

Latest commit

 

History

History
133 lines (91 loc) · 10.7 KB

linux-instructions.md

File metadata and controls

133 lines (91 loc) · 10.7 KB
Raw

Build CoreCLR on Linux

This guide will walk you through building CoreCLR on Linux.

As mentioned in the Linux requirements doc, there are two options to build CoreCLR on Linux:

  • Build using Docker.
  • Build using your own environment.

Build using Docker

Building using Docker will require that you choose the correct image for your environment.

Note that the OS is strictly speaking not important. For example if you are on Ubuntu 20.04 and build using the Ubuntu 18.04 x64 image there should be no issues. You can even use Linux images on a Windows OS if you have WSL enabled. However, note that you can't run multiple OS's on the same Docker Daemon, as it takes resources from the underlying kernel as needed. In other words, you can run either Linux on WSL, or Windows containers. You have to switch between them if you need both, and restart Docker.

The target architecture is more important, as building arm32 using the x64 image will not work. There will be missing rootfs components required by the build. See Docker Images below, for more information on choosing an image to build with.

NOTE: The image's architecture has to match your machine's supported platforms. For example, you can't run arm32 images on an x64 machine. But you could run x64 and arm64 images on an M1 Mac, for example. This is thanks to the Rosetta emulator that Apple Silicon provides. Same case applies to running x86 on an x64 Windows machine thanks to Windows' SYSWOW64. Likewise, you can run Linux arm32 images on a Linux arm64 host.

Please note that choosing the same image as the host OS you are running on will allow you to run the product/tests outside of the docker container you built in.

Once you have chosen an image, the build is one command run from the root of the runtime repository:

docker run --rm \
  -v <RUNTIME_REPO_PATH>:/runtime \
  -w /runtime \
  mcr.microsoft.com/dotnet-buildtools/prereqs:ubuntu-22.04 \
  ./build.sh --subset clr

Dissecting the command:

  • --rm: Erase the created container after use.
  • -v <RUNTIME_REPO_PATH>:/runtime: Mount the runtime repository under /runtime. Replace <RUNTIME_REPO_PATH> with the full path to your runtime repo clone, e.g., -v /home/user/runtime:/runtime.
  • -w: /runtime: Set /runtime as working directory for the container.
  • mcr.microsoft.com/dotnet-buildtools/prereqs:centos-7-20210714125435-9b5bbc2: Docker image name.
  • ./build.sh: Command to be run in the container: run the root build command.
  • -subset clr: Build the clr subset (excluding libraries and installers).

To do cross-building using Docker, you need to use either specific images designated for this purpose, or configure your own. Detailed information on this can be found in the cross-building doc. Note that the official build images are all cross-build images, even when targeting the same architecture as the host image. This is because they target versions of glibc or musl libc that are included in the cross-build rootfs, and not the host OS.

Docker Images

The images used for our official builds can be found in the pipeline resources of our Azure DevOps builds under the container key of the platform you plan to build. Our build infrastructure will automatically use the latest version of the image.

Host OS Target OS Target Arch Image crossrootfs dir
Azure Linux (x64) Alpine 3.13 x64 mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-amd64-alpine-net9.0 /crossrootfs/x64
Azure Linux (x64) Ubuntu 16.04 x64 mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-amd64-net9.0 /crossrootfs/x64
Azure Linux (x64) Alpine arm32 (armhf) mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-arm-alpine-net9.0 /crossrootfs/arm
Azure Linux (x64) Ubuntu 16.04 arm32 (armhf) mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-arm-net9.0 /crossrootfs/arm
Azure Linux (x64) Alpine arm64 (arm64v8) mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-arm64-alpine-net9.0 /crossrootfs/arm64
Azure Linux (x64) Ubuntu 16.04 arm64 (arm64v8) mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-arm64-net9.0 /crossrootfs/arm64
Azure Linux (x64) Ubuntu 16.04 x86 mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-x86-net9.0 /crossrootfs/x86

Notes:

  • All official builds are cross-builds with a rootfs for the target OS, and use the clang version available on the container.
  • These images are built using Dockerfiles maintained in the dotnet-buildtools-prereqs-docker repo.

The following images are used for more extended scenarios, including for community-supported builds, and may require different patterns of use.

Host OS Target OS Target Arch Image crossrootfs dir
Azure Linux (x64) Android Bionic x64 mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-android-amd64-net9.0
Azure Linux (x64) Android Bionic (w/OpenSSL) x64 mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-android-openssl-net9.0
Azure Linux (x64) Android Bionic (w/Docker) x64 mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-android-docker-net9.0
Azure Linux (x64) Azure Linux 3.0 x64 mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-fpm-net9.0
Azure Linux (x64) FreeBSD 13 x64 mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-freebsd-13-net9.0 /crossrootfs/x64
Azure Linux (x64) Ubuntu 18.04 PPC64le mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-ppc64le-net9.0 /crossrootfs/ppc64le
Azure Linux (x64) Ubuntu 24.04 RISC-V mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-riscv64-net9.0 /crossrootfs/riscv64
Azure Linux (x64) Ubuntu 18.04 S390x mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-cross-s390x-net9.0 /crossrootfs/s390x
Azure Linux (x64) Ubuntu 16.04 (Wasm) x64 mcr.microsoft.com/dotnet-buildtools/prereqs:azurelinux-3.0-webassembly-amd64-net9.0 /crossrootfs/x64
Debian (x64) Debian 12 x64 mcr.microsoft.com/dotnet-buildtools/prereqs:debian-12-gcc14-amd64 /crossrootfs/armv6
Ubuntu (x64) Ubuntu 22.04 x64 mcr.microsoft.com/dotnet-buildtools/prereqs:ubuntu-22.04-debpkg
Ubuntu (x64) Tizen 9.0 Arm32 (armel) mcr.microsoft.com/dotnet-buildtools/prereqs:ubuntu-22.04-cross-armel-tizen /crossrootfs/armel
Ubuntu (x64) Ubuntu 20.04 Arm32 (v6) mcr.microsoft.com/dotnet-buildtools/prereqs:ubuntu-20.04-cross-armv6-raspbian-10 /crossrootfs/armv6

Build using your own Environment

Ensure you have all of the prerequisites installed from the Linux Requirements.

Set the maximum number of file-handles

To ensure that your system can allocate enough file-handles for the libraries build, run the command in your terminal sysctl fs.file-max. If it is less than 100000, add fs.file-max = 100000 to /etc/sysctl.conf, and then run sudo sysctl -p.

Build the Runtime

To build CoreCLR on Linux, run build.sh while specifying the clr subset:

./build.sh --subset clr <other args>

After the build is completed, there should be some files placed in artifacts/bin/coreclr/linux.<arch>.<configuration> (for example artifacts/bin/coreclr/linux.x64.Release). The most important binaries are the following:

  • corerun: The command line host. This program loads and starts the CoreCLR runtime and passes the managed program (e.g. program.dll) you want to run with it.
  • libcoreclr.so: The CoreCLR runtime itself.
  • System.Private.CoreLib.dll: The core managed library, containing definitions of Object and base functionality.

Cross-Compilation

Just like you can use specialized Docker images, you can also do any of the supported cross-builds for ARM32 or ARM64 on your own Linux environment. Detailed instructions are found in the cross-building doc.

Create the Core_Root

The Core_Root provides one of the main ways to test your build. Full instructions on how to build it in the CoreCLR testing doc, and we also have a detailed guide on how to use it for your own testing in its own dedicated doc.

Native Sanitizers

CoreCLR can be built with native sanitizers like AddressSanitizer to help catch memory safety issues. To build the project with native sanitizers, add the -fsanitize address argument to the build script like the following:

build.sh -s clr -fsanitize address

When building the repo with any native sanitizers, you should build all native components in the repo with the same set of sanitizers.

The following sanitizers are supported for CoreCLR on Linux:

Sanitizer Name -fsanitize argument Support Status
AddressSanitize address regularly tested on x64