From 8c66d6d2a1a572768616ddca2c3863384b14d846 Mon Sep 17 00:00:00 2001 From: Takashi Yoshii Date: Fri, 16 Nov 2012 10:53:31 +0900 Subject: [PATCH] serial: sh-sci: fix common SCIFB regmap definition About FIFO count, there are two variants of SCIFs which show a) TX count in upper, RX count in lower byte of FDR register b) TX count in TFDR register, RX count in RFDR register Common SCIFB regmap in current source code is defined as "a". At least 7372 and 73a0 HW manual say their SICFB are "b". This patch alters the definition to "b", considering the current one has come from a mistake. The reason is as follows. The flag SCIFB sh-sci driver means it has 256 byte FIFO. The count is from 0(empty) to 256(full), that makes 9-bit. Because FDR is 16-bit register, it can not hold two 9-bits. That's why, SCIFB can not be "a". Signed-off-by: Takashi Yoshii Signed-off-by: Shinya Kuribayashi Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sh-sci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index c2d359cba55d47..107801b1279a18 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -196,9 +196,9 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCxSR] = { 0x14, 16 }, [SCxRDR] = { 0x60, 8 }, [SCFCR] = { 0x18, 16 }, - [SCFDR] = { 0x1c, 16 }, - [SCTFDR] = sci_reg_invalid, - [SCRFDR] = sci_reg_invalid, + [SCFDR] = sci_reg_invalid, + [SCTFDR] = { 0x38, 16 }, + [SCRFDR] = { 0x3c, 16 }, [SCSPTR] = sci_reg_invalid, [SCLSR] = sci_reg_invalid, },