Overview
versionssidpasswordchannelhiddencaptivePortallangautosaveautosaveTimedisplayInterfacedisplayTimeoutserialInterfaceserialEchowebInterfacewebSpiffsledEnabledmaxChmacAPmacStchTimeminDeauthsattackTimeoutforcePacketsdeauthsPerTargetdeauthReasonbeaconChannelbeaconIntervalrandomTxprobesPerSSID
String version = VERSION;
Version number, i.e. v2.0.
PLEASE NOTE that this setting can only be changed in the source code.
String ssid = "pwned";
SSID of access point used for the web interface (if enabled).
The length must be between 1 and 31 characters.
String password = "deauther";
Password of access point used for the web interface (if enabled).
The length must be between 8 and 31 characters.
uint8_t channel = 1;
Default WiFi channel that is used when starting.
HIDDEN
bool hidden = false
Hides the access point that is used for the web interface (if enabled).
bool captivePortal = true;
Enables captive portal for access point (if enabled).
String lang = "en";
Default language for the web interface.
Be sure the language file exists!
bool autosave = true;
Enables automatic saving of SSIDs, device names and settings.
uint32_t autosaveTime = 30000;
Time interval for automatic saving in milliseconds.
bool displayInterface = false;
Enables display interface.
uint32_t displayTimeout = 600
Time in seconds after which the display turns off when inactive.
To disable the display timeout, set it to 0.
bool serialInterface = true;
Enables serial interface.
bool serialEcho = true
Enables echo for each incoming message over serial.
bool webInterface = false;
Enables web interface.
bool webSpiffs = false
Enables SPIFFS for all web files.
Can lead to longer loading times but it nice if you need to edit the the web files regularly.
bool ledEnabled = true
Enables the (RGB) LED feature.
uint8_t maxCh = 13;
Max channel to scan on.
US = 11, EU = 13, Japan = 14.
For more information click here.
uint8_t* macAP;
Mac address used for the access point mode.
Please note that the mac address will only replace the internal mac address when the accesspoint mode is enabled.
You can set a random mac address with set macap random.
uint8_t* macSt;
Mac address used for the station mode.
Please note that the mac address will only replace the internal mac address when the station mode is enabled.
You can set a random mac address with set macst random.
uint16_t chTime = 384;
Time for scanning one channel before going to the next in milliseconds (only if channel hopping is enabled).
uint16_t minDeauths = 3
Minimum number of deauthentication frames when scanning to change the LED to deauth mode.
uint32_t attackTimeout = 600
After what amount of time (in seconds) the attack will stop automatically.
Set it to 0 to disable it.
uint8_t forcePackets = 1;
How many attempts to send out a packet.
Set this value higher if you want to achieve a better packet rate in a busy area.
Be careful this setting could make the device slower or more unstable.
Max value is 255.
uint16_t deauthsPerTarget = 10;
How many deauthentication and disassociation frames are sent out for each target.
uint8_t deauthReason = 1;
The reason code that is sent with the deauth frames to tell the target device why the connection will be closed.
bool beaconChannel = false;
If enabled, will sent all beacon and probe frames on different channels when running a beacon attack.
bool beaconInterval = false;
If set true, beacons will be sent out every second. If set to false, the interval will be 100ms.
A longer interval means more stability and less spamming of packets, but it could take longer
until the clients find the ssids when scanning.
bool randomTX = false
Enables randomized transmission power for sending out beacon and probe request frames.
uint8_t probesPerSSID = 1
How many probe request frames are sent for each SSID.