Merge branch 'bugfix-2.0.x' into my_build

.github/workflows/test-builds.yml

@@ -66,7 +66,7 @@ jobs:
         - mks_robin_lite_maple
         - mks_robin_pro_maple
         #- mks_robin_nano35_maple
-        #- STM32F103RET6_creality_maple
+        #- STM32F103RE_creality_maple
         - STM32F103VE_ZM3E4V2_USB_maple
 
         # STM32 (ST) Environments
@@ -75,7 +75,7 @@ jobs:
         #- STM32F103RC_btt_USB
         - STM32F103RE_btt
         - STM32F103RE_btt_USB
-        - STM32F103RET6_creality
+        - STM32F103RE_creality
         - STM32F103VE_longer
         - STM32F407VE_black
         - STM32F401VE_STEVAL

.gitignore

@@ -41,7 +41,6 @@ applet/
 *.rej
 *.bak
 *.idea
-*.s
 *.i
 *.ii
 *.swp

.vscode/extensions.json

@@ -4,5 +4,8 @@
     "recommendations": [
         "marlinfirmware.auto-build",
         "platformio.platformio-ide"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
     ]
 }

Marlin/Configuration.h

@@ -371,8 +371,12 @@
   //#define PS_OFF_SOUND            // Beep 1s when power off
   #define PSU_ACTIVE_STATE LOW      // Set 'LOW' for ATX, 'HIGH' for X-Box
 
-  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
-  //#define PSU_POWERUP_DELAY 250   // (ms) Delay for the PSU to warm up to full power
+  //#define PSU_DEFAULT_OFF               // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY      250    // (ms) Delay for the PSU to warm up to full power
+  //#define LED_POWEROFF_TIMEOUT 10000    // (ms) Turn off LEDs after power-off, with this amount of delay
+
+  //#define POWER_OFF_TIMER               // Enable M81 D<seconds> to power off after a delay
+  //#define POWER_OFF_WAIT_FOR_COOLDOWN   // Enable M81 S to power off only after cooldown
 
   //#define PSU_POWERUP_GCODE  "M355 S1"  // G-code to run after power-on (e.g., case light on)
   //#define PSU_POWEROFF_GCODE "M355 S0"  // G-code to run before power-off (e.g., case light off)
@@ -384,12 +388,14 @@
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN
     #define AUTO_POWER_COOLER_FAN
-    //#define AUTO_POWER_E_TEMP        50 // (°C) Turn on PSU if any extruder is over this temperature
-    //#define AUTO_POWER_CHAMBER_TEMP  30 // (°C) Turn on PSU if the chamber is over this temperature
-    //#define AUTO_POWER_COOLER_TEMP   26 // (°C) Turn on PSU if the cooler is over this temperature
     #define POWER_TIMEOUT              30 // (s) Turn off power if the machine is idle for this duration
     //#define POWER_OFF_DELAY          60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
   #endif
+  #if EITHER(AUTO_POWER_CONTROL, POWER_OFF_WAIT_FOR_COOLDOWN)
+    //#define AUTO_POWER_E_TEMP        50 // (°C) PSU on if any extruder is over this temperature
+    //#define AUTO_POWER_CHAMBER_TEMP  30 // (°C) PSU on if the chamber is over this temperature
+    //#define AUTO_POWER_COOLER_TEMP   26 // (°C) PSU on if the cooler is over this temperature
+  #endif
 #endif
 
 //===========================================================================
@@ -431,6 +437,9 @@
  *     5 : 100kΩ  ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C
  *   501 : 100kΩ  Zonestar - Tronxy X3A
  *   502 : 100kΩ  Zonestar - used by hot bed in Zonestar Průša P802M
+ *   503 : 100kΩ  Zonestar (Z8XM2) Heated Bed thermistor
+ *   504 : 100kΩ  Zonestar P802QR2 (Part# QWG-104F-B3950) Hotend Thermistor
+ *   505 : 100kΩ  Zonestar P802QR2 (Part# QWG-104F-3950) Bed Thermistor
  *   512 : 100kΩ  RPW-Ultra hotend
  *     6 : 100kΩ  EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)
  *     7 : 100kΩ  Honeywell 135-104LAG-J01
@@ -450,6 +459,7 @@
  *    61 : 100kΩ  Formbot/Vivedino 350°C Thermistor - beta 3950
  *    66 : 4.7MΩ  Dyze Design High Temperature Thermistor
  *    67 : 500kΩ  SliceEngineering 450°C Thermistor
+ *    68 : PT100 amplifier board from Dyze Design
  *    70 : 100kΩ  bq Hephestos 2
  *    75 : 100kΩ  Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32
  *  2000 : 100kΩ  Ultimachine Rambo TDK NTCG104LH104KT1 NTC100K motherboard Thermistor
@@ -1911,8 +1921,7 @@
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z_raise }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
-  //#define NOZZLE_PARK_X_ONLY          // X move only is required to park
-  //#define NOZZLE_PARK_Y_ONLY          // Y move only is required to park
+  #define NOZZLE_PARK_MOVE          0   // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE    5   // (mm/s) Z axis feedrate (not used for delta printers)
@@ -2819,7 +2828,7 @@
 // Ender-3 v2 OEM display. A DWIN display with Rotary Encoder.
 //
 //#define DWIN_CREALITY_LCD           // Creality UI
-//#define DWIN_CREALITY_LCD_ENHANCED  // Enhanced UI
+//#define DWIN_LCD_PROUI              // Pro UI by MRiscoC
 //#define DWIN_CREALITY_LCD_JYERSUI   // Jyers UI by Jacob Myers
 //#define DWIN_MARLINUI_PORTRAIT      // MarlinUI (portrait orientation)
 //#define DWIN_MARLINUI_LANDSCAPE     // MarlinUI (landscape orientation)
@@ -2832,7 +2841,7 @@
   #define BUTTON_DELAY_EDIT  50 // (ms) Button repeat delay for edit screens
   #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
 
-  //#define TOUCH_IDLE_SLEEP 300 // (secs) Turn off the TFT backlight if set (5mn)
+  //#define TOUCH_IDLE_SLEEP 300 // (s) Turn off the TFT backlight if set (5mn)
 
   #define TOUCH_SCREEN_CALIBRATION
 

Marlin/src/HAL/AVR/HAL.cpp

@@ -36,7 +36,7 @@
 // ------------------------
 
 // Don't initialize/override variable (which would happen in .init4)
-uint8_t reset_reason __attribute__((section(".noinit")));
+uint8_t MarlinHAL::reset_reason __attribute__((section(".noinit")));
 
 // ------------------------
 // Public functions
@@ -45,22 +45,22 @@ uint8_t reset_reason __attribute__((section(".noinit")));
 __attribute__((naked))             // Don't output function pro- and epilogue
 __attribute__((used))              // Output the function, even if "not used"
 __attribute__((section(".init3"))) // Put in an early user definable section
-void HAL_save_reset_reason() {
+void save_reset_reason() {
   #if ENABLED(OPTIBOOT_RESET_REASON)
     __asm__ __volatile__(
       A("STS %0, r2")
-      : "=m"(reset_reason)
+      : "=m"(hal.reset_reason)
     );
   #else
-    reset_reason = MCUSR;
+    hal.reset_reason = MCUSR;
   #endif
 
   // Clear within 16ms since WDRF bit enables a 16ms watchdog timer -> Boot loop
-  MCUSR = 0;
+  hal.clear_reset_source();
   wdt_disable();
 }
 
-void HAL_init() {
+void MarlinHAL::init() {
   // Init Servo Pins
   #define INIT_SERVO(N) OUT_WRITE(SERVO##N##_PIN, LOW)
   #if HAS_SERVO_0
@@ -75,9 +75,11 @@ void HAL_init() {
   #if HAS_SERVO_3
     INIT_SERVO(3);
   #endif
+
+  init_pwm_timers();   // Init user timers to default frequency - 1000HZ
 }
 
-void HAL_reboot() {
+void MarlinHAL::reboot() {
   #if ENABLED(USE_WATCHDOG)
     while (1) { /* run out the watchdog */ }
   #else
@@ -93,20 +95,20 @@ void HAL_reboot() {
 
 #else // !SDSUPPORT
 
-extern "C" {
-  extern char __bss_end;
-  extern char __heap_start;
-  extern void* __brkval;
-
-  int freeMemory() {
-    int free_memory;
-    if ((int)__brkval == 0)
-      free_memory = ((int)&free_memory) - ((int)&__bss_end);
-    else
-      free_memory = ((int)&free_memory) - ((int)__brkval);
-    return free_memory;
+  extern "C" {
+    extern char __bss_end;
+    extern char __heap_start;
+    extern void* __brkval;
+
+    int freeMemory() {
+      int free_memory;
+      if ((int)__brkval == 0)
+        free_memory = ((int)&free_memory) - ((int)&__bss_end);
+      else
+        free_memory = ((int)&free_memory) - ((int)__brkval);
+      return free_memory;
+    }
   }
-}
 
 #endif // !SDSUPPORT