Guru Meditation Error and then Reboot when sending datas with NewKaku protocol

[WinZs]

Hi ! first of all, thanks for all the amazing work you did !
I need some help please.
Receiving data works like a charm but I have issues with emission :
my ESP32 nodeMCU always crash when I try to send data with the NewKaku protocol (I have DIO stuffs)
It seem's that the crash only occurs with NewKaku protocol ; I've tried some example from https://www.rflink.nl/protref.php Sample data of transmitted RF packets with others protocols : no crash.

Here is the serial output log with 5 different data sent.
NewKaku always crash the esp with Guru Mediatation error and then reboot :

12:41:53.615 -> NTP synchronized: 2023-07-09 10:41:52
12:42:39.179 -> [2K Message arrived [Serial]:10;Kaku;01769f0a;2;ON
12:42:39.179 -> 20;01;CMD UNKNOWN;
12:43:20.029 -> [2K Message arrived [Serial]:10;DELTRONIC;001c33;
12:43:20.029 -> 20;02;CMD UNKNOWN;
12:43:37.909 -> [2K Message arrived [Serial]:10;HomeEasy;7900b100;3;ON
12:43:37.943 -> 20;03;CMD UNKNOWN;
12:43:53.175 -> [2K Message arrived [Serial]:10;Kaku;00004d;1;OFF;
12:43:53.578 -> 20;04;OK;
12:44:11.549 -> [2K Message arrived [Serial]:10;NewKaku;128ac4d;1;OFF;
12:44:11.850 -> Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
12:44:11.850 ->
12:44:11.850 -> Core 1 register dump:
12:44:11.850 -> PC : 0x4008476c PS : 0x00060c35 A0 : 0x800847ae A1 : 0x3ffb2110
12:44:11.850 -> A2 : 0x3ff5f070 A3 : 0x10ddd41a A4 : 0x00000017 A5 : 0x3ffb81e8
12:44:11.850 -> A6 : 0x00ff0000 A7 : 0xff000000 A8 : 0x10ddd41a A9 : 0x3ff5f078
12:44:11.884 -> A10 : 0x00000001 A11 : 0x00060c23 A12 : 0x00060c20 A13 : 0x00000001
12:44:11.884 -> A14 : 0x00000019 A15 : 0x00000001 SAR : 0x00000009 EXCCAUSE: 0x00000006
12:44:11.884 -> EXCVADDR: 0x00000000 LBEG : 0x40084781 LEND : 0x40084789 LCOUNT : 0x00000027
12:44:11.884 ->
12:44:11.884 ->
12:44:11.884 -> Backtrace: 0x40084769:0x3ffb2110 0x400847ab:0x3ffb2130 0x400f831c:0x3ffb2150 0x400dbeec:0x3ffb2170 0x400de5f1:0x3ffb21b0 0x400e391a:0x3ffb21e0 0x400e5278:0x3ffb2200 0x400dcae5:0x3ffb2220 0x400e4f46:0x3ffb2240 0x400e5467:0x3ffb2270 0x400f9075:0x3ffb2290
12:44:11.917 ->
12:44:11.917 ->
12:44:11.917 -> Core 0 register dump:
12:44:11.917 -> PC : 0x401949ea PS : 0x00060e35 A0 : 0x801029c4 A1 : 0x3ffbca50
12:44:11.917 -> A2 : 0x00000000 A3 : 0x80000001 A4 : 0x800858f2 A5 : 0x3ffbf68c
12:44:11.950 -> A6 : 0x3ffbe5dc A7 : 0x3ffc92ec A8 : 0x8010249a A9 : 0x3ffbca20
12:44:11.950 -> A10 : 0x00000000 A11 : 0x80000001 A12 : 0x80090ddc A13 : 0x3ffbc950
12:44:11.950 -> A14 : 0x00000003 A15 : 0x00060023 SAR : 0x0000001d EXCCAUSE: 0x00000006
12:44:11.950 -> EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000
12:44:11.950 ->
12:44:11.950 ->
12:44:11.950 -> Backtrace: 0x401949e7:0x3ffbca50 0x401029c1:0x3ffbca70 0x4008eea8:0x3ffbca90
12:44:11.984 ->
12:44:11.984 ->
12:44:11.984 ->
12:44:11.984 ->
12:44:11.984 -> ELF file SHA256: 2e886cce41b4d59b
12:44:11.984 ->
12:44:11.984 -> E (16509) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
12:44:11.984 -> Rebooting...
12:44:11.984 -> ets Jun 8 2016 00:22:57
12:44:11.984 ->
12:44:11.984 -> rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
12:44:11.984 -> configsip: 0, SPIWP:0xee
12:44:11.984 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
12:44:12.018 -> mode:DIO, clock div:2
12:44:12.018 -> load:0x3fff0030,len:1184
12:44:12.018 -> load:0x40078000,len:13192
12:44:12.018 -> load:0x40080400,len:3028
12:44:12.018 -> entry 0x400805e4
12:44:12.520 -> E (522) esp_core_dump_flash: No core d⸮f⸮⸮ partition found!
12:44:12.520 -> E (522) esp_core_dump_flash: No core dump partition found!
12:44:12.788 ->
12:44:12.788 -> Arduino IDE Version : 10812
12:44:12.788 -> ESP SDK version: v4.4.4
12:44:12.788 -> Sketch File : RFLink/RFLink.cpp
12:44:12.788 -> Compiled on : Jul 1 2023 at 14:05:45
12:44:12.788 -> 20;00;RFLink_ESP;VER=5.1;BUILD=unknown;
12:44:12.788 -> Loading persistent filesystem... OK. File system usage: 12/320KB.
12:44:12.821 -> Now opening JSON config file '/config.json'
12:44:12.855 -> JSON file mem usage: 1875 / 4096
12:44:12.855 -> Now dumping JSON file content:

[cpainchaud]

Hi,

Did you compile it by yourself? or used an image from this repo (or another?)

thank you

[WinZs]

Hi !
I 've used RFLink32-master.zip from here and compiled with Plateformio IDE as recommanded in documentation.
It was the first time I used Plateformio... so it is more than possible that I've missed someting..?.. In that case sorry for inconvenience. I will try to use last nightly bin image and give feedback.
Thanks for all
Greetings

[WinZs]

Dear C. Painchaud,
I 've updated from web interface firmware via http url : https://github.com/cpainchaud/RFLink32/releases/download/nightly/esp32-firmware-OTA.bin

But still error Guru Meditation error when emmitting (serial or mqtt)

I have 2 standard Rf module Qiachip WL 101 102
Receiving no problem , Mqtt works fine too

Arduino IDE Version : 10812
ESP SDK version: v4.4.4
Sketch File : RFLink/RFLink.cpp
Compiled on : Jul 10 2023 at 08:09:39
20;00;RFLink_ESP;VER=5.1;BUILD=20230710-080645-master;
Loading persistent filesystem... OK. File system usage: 12/320KB.
Now opening JSON config file '/config.json'
JSON file mem usage: 1875 / 4096
Now dumping JSON file content:
{"wifi":{"client_enabled":true,"client_dhcp_enabled":true,"client_ssid":"XXXXXXXXXXXXXXX","client_password":"XXXXXXXXXXXXXXX","client_ip":"XXXXXXXXXXXXXXX","client_mask":"255.255.255.0","client_gateway":"XXXXXXXXXXXXXXX","client_dns":"XXXXXXXXXXXXXXX","client_hostname":"XXXXXXXXXXXXXXX","ap_enabled":true,"ap_ssid":"RFLink-AP","ap_password":"","ap_ip":"192.168.4.1","ap_network":"192.168.4.0","ap_mask":"255.255.255.0"},"mqtt":{"enabled":true,"server":"XXXXXXXXXXXXXXX","port":1883,"id":"RFLink32","user":"XXXXXXXXXXXXXXX","password":"XXXXXXXXXXXXXXX","topic_in":"/ESP00/cmd","topic_out":"/ESP00/msg","lwt_enabled":true,"topic_lwt":"/ESP00/lwt","ssl_enabled":false,"ssl_insecure":true,"ca_cert":""},"serial2net":{"enabled":false,"port":1900},"portal":{"enabled":true,"auth_enabled":true,"auth_user":"XXXXXXXXXXXXXXX","auth_password":"XXXXXXXXXXXXXXX"},"signal":{"async_mode_enabled":false,"sample_rate":1,"min_raw_pulses":24,"seek_timeout":25,"min_preamble":100,"min_pulse_len":90,"signal_end_timeout":5000,"signal_repeat_time":250,"scan_high_time":50},"radio":{"hardware":"generic","rx_data":21,"rx_vcc":-1,"rx_nmos":-1,"rx_pmos":-1,"rx_gnd":-1,"rx_na":-1,"rx_reset":-1,"rx_cs":-1,"tx_data":23,"tx_vcc":-1,"tx_nmos":-1,"tx_pmos":-1,"tx_gnd":-1}}
Now trying to initialize hardware 'generic'
Hardware initialization was successful!
Applied slicer 'Legacy'
Signal parameters have changed.

• WIFI AP starting with SSID 'RFLink-AP' and band=9... OK
  Trying to connect WIFI SSID XXXXXXXXXXXXXXX. A status will be given whenever it occurs.
  Radio pin RF_RX_DATA : 21
  Radio pin RF_TX_DATA : 23
  Starting WebServer... OK
  Connected to AP SSID:XXXXXXXXXXXXXXX BSSID: XXXXXXXXXXXXXXX Channel: 11 Auth mode: 3
  WiFi Client has received a new IP: XXXXXXXXXXXXXXX
  MQTT parameters have changed, first disconnecting...
  MQTT parameters have changed, now applying...
  Trying to connect to MQTT Server 'XXXXXXXXXXXXXXX' ... Established
  MQTT ID : RFLink32
  MQTT Username : XXXXXXXXXXXXXXX

NTP synchronized: 2023-07-10 09:12:29

20;01;NewKaku;ID=XXXXXXXXXXXXXXX;SWITCH=1;CMD=ON;
20;02;NewKaku;ID=XXXXXXXXXXXXXXX;SWITCH=2;CMD=OFF;
20;03;NewKaku;ID=XXXXXXXXXXXXXXX;SWITCH=2;CMD=ON;

Message arrived [MQTT] 10;NewKaku;XXXXXXXXXXXXXXX;2;ON;
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).

Core 1 register dump:
PC : 0x400f83f0 PS : 0x00060f35 A0 : 0x800dbf3f A1 : 0x3ffb2070
A2 : 0x00000000 A3 : 0x04719bf3 A4 : 0x3ffd397c A5 : 0x3ffb81e8
A6 : 0x00ff0000 A7 : 0xff000000 A8 : 0x800f83cf A9 : 0x3ffb2050
A10 : 0x047198f1 A11 : 0x00000000 A12 : 0x047196df A13 : 0x00000001
A14 : 0x3ffc712c A15 : 0x3ffc7144 SAR : 0x00000009 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x40084781 LEND : 0x40084789 LCOUNT : 0x00000026

Backtrace: 0x400f83ed:0x3ffb2070 0x400dbf3c:0x3ffb2090 0x400de641:0x3ffb20d0 0x400e396a:0x3ffb2100 0x400e52cc:0x3ffb2120 0x400dc9ea:0x3ffb2140 0x400e3d37:0x3ffb2160 0x40192ee7:0x3ffb2180 0x400e5c71:0x3ffb21a0 0x400e468a:0x3ffb21e0 0x400e4f8b:0x3ffb2240 0x400e54bb:0x3ffb2270 0x400f9125:0x3ffb2290

#0 0x400f83ed:0x3ffb2070 in initArduino at C:/Users/XXXXXXXXXXXXXXX/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-misc.c:220
#1 0x400dbf3c:0x3ffb2090 in RFLink::Signal::AC_Send(unsigned long, unsigned char) at RFLink/2_Signal.cpp:910
#2 0x400de641:0x3ffb20d0 in Plugin_016(unsigned char, char const*) at RFLink/./Plugins/Plugin_016.c:37
#3 0x400e396a:0x3ffb2100 in saveRTSRecord(unsigned char, unsigned int, unsigned short) at RFLink/./Plugins/Plugin_017.c:554
#4 0x400e52cc:0x3ffb2120 in ArduinoJson6185_91::VariantSlot::next() at .pio/libdeps/genericESP32/ArduinoJson/src/ArduinoJson/Variant/VariantSlot.hpp:42
(inlined by) ArduinoJson6185_91::VariantSlot* ArduinoJson6185_91::CollectionData::getSlot<ArduinoJson6185_91::StringAdapter<char const*, false, void> >(ArduinoJson6185_91::StringAdapter<char const*, false, void>) const at .pio/libdeps/genericESP32/ArduinoJson/src/ArduinoJson/Collection/CollectionImpl.hpp:112
(inlined by) ArduinoJson6185_91::VariantData* ArduinoJson6185_91::CollectionData::getOrAddMember<ArduinoJson6185_91::StringAdapter<char const*, false, void> >(ArduinoJson6185_91::StringAdapter<char const*, false, void>, ArduinoJson6185_91::MemoryPool*) at .pio/libdeps/genericESP32/ArduinoJson/src/ArduinoJson/Collection/CollectionImpl.hpp:148
(inlined by) ArduinoJson6185_91::VariantData* ArduinoJson6185_91::objectGetOrAddMember<ArduinoJson6185_91::StringAdapter<char const*, false, void>

(ArduinoJson6185_91::CollectionData*, ArduinoJson6185_91::StringAdapter<char const*, false, void>, ArduinoJson6185_91::MemoryPool*) at .pio/libdeps/genericESP32/ArduinoJson/src/ArduinoJson/Object/ObjectFunctions.hpp:49
#5 0x400dc9ea:0x3ffb2140 in HardwareSerialExtended::readBytesUntilNewLine(char*, unsigned int) at RFLink/3_Serial.cpp:37
(inlined by) ReadSerial() at RFLink/3_Serial.cpp:114
#6 0x400e3d37:0x3ffb2160 in RFLink::Mqtt::reconnect(int, bool) at RFLink/6_MQTT.cpp:263
#7 0x40192ee7:0x3ffb2180 in RFLink::Utils::BitArray::BitArray() at RFLink/7_Utils.cpp:511
#8 0x400e5c71:0x3ffb21a0 in PubSubClient::setBufferSize(unsigned short) at .pio/libdeps/genericESP32/PubSubClient/src/PubSubClient.cpp:743
#9 0x400e468a:0x3ffb21e0 in _GLOBAL__sub_D_WIFIClient at RFLink/6_MQTT.cpp:75
(inlined by) _GLOBAL__sub_D_WIFIClient at RFLink/6_MQTT.cpp:476
#10 0x400e4f8b:0x3ffb2240 in RFLink::sendRawPrint(char const*, bool) at RFLink/RFLink.cpp:211
#11 0x400e54bb:0x3ffb2270 in std::function<void (char*, unsigned char*, unsigned int)>::~function() at c:\users\XXXXXXXXXXXXXXX.platformio\packages\toolchain-xtensa-esp32\xtensa-esp32-elf\include\c++\8.4.0\bits/std_function.h:370
(inlined by) PubSubClient::~PubSubClient() at .pio/libdeps/genericESP32/PubSubClient/src/PubSubClient.cpp:161
#12 0x400f9125:0x3ffb2290 in cpu_ll_get_cycle_count at C:/Users/XXXXXXXXXXXXXXX/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/esp32/include/hal/cpu_ll.h:45
(inlined by) pulseIn at C:/Users/XXXXXXXXXXXXXXX/.platformio/packages/framework-arduinoespressif32/cores/esp32/wiring_pulse.c:41

Core 0 register dump:
PC : 0x40194bfe PS : 0x00060335 A0 : 0x80102a74 A1 : 0x3ffbca50
A2 : 0x00000000 A3 : 0x80000001 A4 : 0x80090ddc A5 : 0x3ffbc970
A6 : 0x00000003 A7 : 0x00060023 A8 : 0x8010254a A9 : 0x3ffbca20
A10 : 0x00000000 A11 : 0x003fffff A12 : 0x80083fc7 A13 : 0x3ffbc940
A14 : 0x00000001 A15 : 0x3ffbc720 SAR : 0x0000001d EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000

Backtrace: 0x40194bfb:0x3ffbca50 0x40102a71:0x3ffbca70 0x4008eea8:0x3ffbca90

#0 0x40194bfb:0x3ffbca50 in mbedtls_ssl_update_out_pointers at ??:?
#1 0x40102a71:0x3ffbca70 in esp_register_freertos_tick_hook_for_cpu at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/esp_system/freertos_hooks.c:101
(inlined by) esp_register_freertos_tick_hook_for_cpu at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/esp_system/freertos_hooks.c:88
#2 0x4008eea8:0x3ffbca90 in prvIdleTask at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/freertos/tasks.c:3987

ELF file SHA256: ce9095aa4c778add

E (3267) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting...
ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13192
load:0x40080400,len:3028
entry 0x400805e4
E (522) esp_core_dump_flash: No core du���partition found!
E (522) esp_core_dump_flash: No core dump partition found!

Arduino IDE Version : 10812
ESP SDK version: v4.4.4
Sketch File : RFLink/RFLink.cpp
Compiled on : Jul 10 2023 at 08:09:39
20;00;RFLink_ESP;VER=5.1;BUILD=20230710-080645-master;
Loading persistent filesystem... OK. File system usage: 12/320KB.
[...]