From eddb2c058df7842c0239ee33d423625eca26254e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 21:36:48 +0530 Subject: [PATCH 001/490] New translations strings.xml (Afrikaans) --- app/src/donate/res/values-af/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-af/strings.xml diff --git a/app/src/donate/res/values-af/strings.xml b/app/src/donate/res/values-af/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-af/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 2de550043cae83d06518823fe732bc4a5534dead Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 21:36:49 +0530 Subject: [PATCH 002/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-ko/strings.xml diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-ko/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 943089c0688a127de4be17ae828b6bf35c64e844 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 21:36:51 +0530 Subject: [PATCH 003/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-pt/strings.xml diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-pt/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 49e04c68587f472ab524128c014826fa75fa5ecc Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 21:36:52 +0530 Subject: [PATCH 004/490] New translations strings.xml (Portuguese) --- app/src/donate/res/values-pt/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-pt/strings.xml diff --git a/app/src/donate/res/values-pt/strings.xml b/app/src/donate/res/values-pt/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-pt/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 97e6e3a657aee7f30e92197af48624bb703fb7b7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 21:36:53 +0530 Subject: [PATCH 005/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 102 ++++++++++++++++++++----- 1 file changed, 82 insertions(+), 20 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 47d62ed5..00ba87c0 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -1,5 +1,6 @@ - + + Uruchom Night Light Główny przełącznik do włączenia/wyłączenia night light Brak dostepu do root @@ -7,21 +8,38 @@ Niekompatybilny Twój kernel nie obsługuje KCAL. KCAL to podrasowany sterownik ekranowy dla telefonów z procesorem Qualcomm. By aplikacja działała potrzebne jest wsparcie dla KCAL Automatyczny przełacznik - "Automatycznie uruchamiaj Night Light pomiędzy ustalonymi godzinami. Night Light będzie automatycznie wyłączany za tymi zakresami godzin." + Automatycznie uruchamiaj Night Light pomiędzy ustalonymi godzinami. Night Light będzie automatycznie wyłączany za tymi zakresami godzin. Godzina uruchomienia Godzina wyłączenia + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time Włącz Wyłącz O aplikacji Night light używa KCAL, który jest podrasowanym sterownikiem ekranowynm dla urządzeń z procesorem od Qualcomm. Pozwala on na dostosowanie intensywności zielonego i niebieskiego swiatła co czyni ekran bardziej konfortowy do czytania w ciemnych pomieszczeniach i pozwala także łatwiej zasnąć. Zmiany które wprowadza są w warstwie sterownika i nie używa on żadnego oprogramowania nadpisującego ekran. Także jest on przyjazny dla bateri i zmiany możemy zobaczyć w każdej aplikacji Włącz/Wyłącz  (Następny dzień) - Nie można uzyskać ostatnio znanej lokalizacji Użyj ustawień czasu słońca / wschodu słońca + Nie można uzyskać ostatnio znanej lokalizacji Lubisz tą aplikcaje? Jeśli podoba ci się ta aplikacja, możesz rozważyć uzyskanie płatnej wersji aplikacji. Mimo że nie ma ona żadnych dodatkowych funkcji niż ta wersja, pokazujesz swoje wsparcie i uznanie dla aplikacji, a to zmotywuje programistę i wspomoże rozwój aplikacji :) - Zielony + Zachowaj aktualne wartości KCAL + O aplikacji + Współtwórcy + Temperatura kolorów + Wartośc temperatury kolorów. Im niższa temperatura tym konfortowsze jest patrzenie na ekran przy słabym świetle. + Ustaw opóźnienie po uruchomieniu telefonu + Ustaw opóźnienie po którym Night Light przywróci ustawienia i wdroży je po uruchomieniu. Ustawienia Night Light będą ustawione z %s opóźnieniem. + Wygląda na to że ustawienia Night Light zostały przywrócone ale nie zostały wdrożone. Zalecane jest wydłużenie czasu opóżnienia po jakim ustawienia zostaną wdrożone. + KCAL Backup + Ustawienia zapasowe KCAL Tutaj możesz skonfigurować twoje stare ustawienia KCAL. Te ustawienia będą używane gdy night light nie będzie używany + Czerwony + Zielony + Niebieski + Skonfiguruj ustawienia zapasowe KCAL Profile Utwórz profil Utwórz profil (kolekcje ustawień), które możesz ustawic za pomocą jednego kliknięcia, albo użyć aplikacji takiej jak Tasker który zrobi to za ciebie @@ -42,25 +60,69 @@ Jesteś pewny, że chcesz używać profilu %1$s jako część rutyny pluginu Tasker? Night Light wyłączony Aby używac pluginu tasker, najpierw musisz włączyć główny przełącznik. - Akcje - Oceń aplikacj w Sklepie Play - Uzyskaj wersję wspierającą tej aplikacji Główne przełączniki Kontrola kolorów Ustaw podczas uruchaminia telefonu Automatyzacja Lista stworzonych profili Profile to kolekcja ustawień które możesz ustawić za pomocą jednego kliknięcie, albo pozwlić by aplikacji taka jak Tasker używajac swoich automatycznch profili zrobiła to za ciebie. - Współtwórcy - Skonfiguruj ustawienia zapasowe KCAL - Wartośc temperatury kolorów. Im niższa temperatura tym konfortowsze jest patrzenie na ekran przy słabym świetle. - Czerwony - Ustawienia zapasowe KCAL - O aplikacji - Niebieski - Temperatura kolorów - Ustaw opóźnienie po uruchomieniu telefonu - Ustaw opóźnienie po którym Night Light przywróci ustawienia i wdroży je po uruchomieniu. Ustawienia Night Light będą ustawione z %s opóźnieniem. - Wygląda na to że ustawienia Night Light zostały przywrócone ale nie zostały wdrożone. Zalecane jest wydłużenie czasu opóżnienia po jakim ustawienia zostaną wdrożone. - Zachowaj aktualne wartości KCAL - \ No newline at end of file + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 0f9d9ce6319fb6ff10f0029f15860c4a87a3d78a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 21:36:54 +0530 Subject: [PATCH 006/490] New translations strings.xml (Polish) --- app/src/donate/res/values-pl/strings.xml | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/app/src/donate/res/values-pl/strings.xml b/app/src/donate/res/values-pl/strings.xml index c5de5dd2..499df6b5 100644 --- a/app/src/donate/res/values-pl/strings.xml +++ b/app/src/donate/res/values-pl/strings.xml @@ -1,5 +1,6 @@ - - Dziękuje - Za używanie płatnej wersji aplikacji :) - \ No newline at end of file + + + Dziękuje + Za używanie płatnej wersji aplikacji :) + From 7d556666a93c79f220e02c8da2ff98243aad2231 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 21:36:56 +0530 Subject: [PATCH 007/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-no/strings.xml diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-no/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 39c5f1835c28d11101a99f201c276adfd5e4d3d6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 21:36:57 +0530 Subject: [PATCH 008/490] New translations strings.xml (Norwegian) --- app/src/donate/res/values-no/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-no/strings.xml diff --git a/app/src/donate/res/values-no/strings.xml b/app/src/donate/res/values-no/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-no/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From d168b8ab3d2566832cb52f57988729b6d25a3d6d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 21:36:58 +0530 Subject: [PATCH 009/490] New translations strings.xml (Korean) --- app/src/donate/res/values-ko/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-ko/strings.xml diff --git a/app/src/donate/res/values-ko/strings.xml b/app/src/donate/res/values-ko/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-ko/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 6132856f262d582ab30eefb63e36a4ff0f289ae1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:02:58 +0530 Subject: [PATCH 010/490] New translations strings.xml (Chinese Simplified) --- app/src/donate/res/values-zh/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-zh/strings.xml diff --git a/app/src/donate/res/values-zh/strings.xml b/app/src/donate/res/values-zh/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-zh/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 13617254d0fcf9449bfb99a7800e1f048a64f3a7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:02:59 +0530 Subject: [PATCH 011/490] New translations strings.xml (Italian) --- app/src/donate/res/values-it/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-it/strings.xml diff --git a/app/src/donate/res/values-it/strings.xml b/app/src/donate/res/values-it/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-it/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From b65a3cc52198828ef49d2b9cf0445c02a351e5bd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:01 +0530 Subject: [PATCH 012/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-it/strings.xml diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-it/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 5e3071b17cd2f6de327a96a59a6bec051284c357 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:02 +0530 Subject: [PATCH 013/490] New translations strings.xml (Japanese) --- app/src/donate/res/values-ja/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-ja/strings.xml diff --git a/app/src/donate/res/values-ja/strings.xml b/app/src/donate/res/values-ja/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-ja/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 643993552c02b8b7e26f9b70fa9386832bfbcc67 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:04 +0530 Subject: [PATCH 014/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-ja/strings.xml diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-ja/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From ad360b439897f49da17d7b8d96448fe71c01a2f6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:08 +0530 Subject: [PATCH 015/490] New translations strings.xml (Irish) --- app/src/donate/res/values-ga/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-ga/strings.xml diff --git a/app/src/donate/res/values-ga/strings.xml b/app/src/donate/res/values-ga/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-ga/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From b274c510994c170169cc67362b713f3435ac976d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:09 +0530 Subject: [PATCH 016/490] New translations strings.xml (Russian) --- app/src/donate/res/values-ru/strings.xml | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/app/src/donate/res/values-ru/strings.xml b/app/src/donate/res/values-ru/strings.xml index d0d720d9..4476954d 100644 --- a/app/src/donate/res/values-ru/strings.xml +++ b/app/src/donate/res/values-ru/strings.xml @@ -1,4 +1,6 @@ - - Спасибо - За приобретение пожертвованной версии приложения :) + + + + Спасибо + За приобретение пожертвованной версии приложения :) From 0012ea5c1e09cfaf422e54ff9c4685a3ee74238f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:11 +0530 Subject: [PATCH 017/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 138 +++++++++++++++++++------ 1 file changed, 109 insertions(+), 29 deletions(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 5938e8a0..613d91f4 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -1,48 +1,128 @@ - - + + + Включить Night Light Главный переключатель для включения/отключения ночного света. - + Нет рут-доступа + Для работы Night Light необходим рут-доступ + Несовместимый + Ваше ядро не поддерживает KCAL. KCAL - это функция настройки драйвера дисплея для устройств Qualcomm. Поддержка KCAL необходима для работы ночного света. Автоматическое вкл. Night Light Автоматическое включение ночного света между указанным диапазоном временем. Ночной свет будет автоматически отключен за пределами этого диапазона времени. - От заката до рассвета Время начала Время окончания -  (Следующий день) - + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time Вкл. Выкл. - + О приложении + Ночной свет использует KCAL, который является функцией настройки драйвера дисплея для нового поколения Qualcomm устройств. Ночной свет регулирует интенсивность синего света, что делает его более удобным для ваших глаз, когда вы используете телефон в тёмное время суток и это помогает вам заснуть. Поскольку данное приложение вносит изменения на уровне драйвера и не использует никакие наложения программного обеспечения, то батарея более дружественная, и изменение можно увидеть повсюду на дисплее. + Вкл./Откл. +  (Следующий день) + От заката до рассвета + Невозможно получить ваше последнее известное местоположение. + Вам нравится это приложение? + Если вам нравится это приложение, то вы можете рассмотреть возможность получения пожертвованной версии приложения. Хотя он поставляется без дополнительных функций, чем эта версия, он показывает вашу поддержку и оценку для приложения, и он будет мотивировать разработчика и поддерживать разработку приложения :) + Оберегать исходные параметры KCAL + О приложении + Авторы Цветовая температура Здесь вы устанавливаете значение цветовой температуры. Более низкие температуры лучше подходят для просмотра в недостаточной освещенности. - Установить задержку запуска Установите задержку, после которой параметры ночного света будут восстановлены и применены после загрузки. Параметры ночного света будут применены после %s сек. Похоже, параметры ночного света были восстановлены, но они не применились после последней загрузки. Рассмотрите возможность увеличения задержки, чтобы параметры можно было успешно восстановить и применить после загрузки. - - Оберегать исходные параметры KCAL - Настроить резервное копирование KCAL? + KCAL Backup Настройки резервного копирования KCAL Здесь вы можете настроить свои исходные параметры KCAL. Эти параметры будут применены при выключении Night Light. Красный Зеленый Синий - - Невозможно получить ваше последнее известное местоположение. - - Вкл./Откл. - - Нет рут-доступа - Для работы Night Light необходим рут-доступ - Несовместимый - Ваше ядро не поддерживает KCAL. KCAL - это функция настройки драйвера дисплея для устройств Qualcomm. Поддержка KCAL необходима для работы ночного света. - - О приложении - О приложении - Ночной свет использует KCAL, который является функцией настройки драйвера дисплея для нового поколения Qualcomm устройств. Ночной свет регулирует интенсивность синего света, что делает его более удобным для ваших глаз, когда вы используете телефон в тёмное время суток и это помогает вам заснуть. Поскольку данное приложение вносит изменения на уровне драйвера и не использует никакие наложения программного обеспечения, то батарея более дружественная, и изменение можно увидеть повсюду на дисплее. - - Авторы - - Вам нравится это приложение? - Если вам нравится это приложение, то вы можете рассмотреть возможность получения пожертвованной версии приложения. Хотя он поставляется без дополнительных функций, чем эта версия, он показывает вашу поддержку и оценку для приложения, и он будет мотивировать разработчика и поддерживать разработку приложения :) + Настроить резервное копирование KCAL? + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version From 25c53de3a50e92bd1ee75ef7cb8dc5bbbd4c86fe Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:12 +0530 Subject: [PATCH 018/490] New translations strings.xml (Spanish) --- app/src/donate/res/values-es/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-es/strings.xml diff --git a/app/src/donate/res/values-es/strings.xml b/app/src/donate/res/values-es/strings.xml new file mode 100644 index 00000000..94624e41 --- /dev/null +++ b/app/src/donate/res/values-es/strings.xml @@ -0,0 +1,6 @@ + + + + Gracias + Por obtener la versión de donación de la aplicación :) + From 9557a0423ac7a31c6d9dfcd30c3de17e1d665dd6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:14 +0530 Subject: [PATCH 019/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-es/strings.xml diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml new file mode 100644 index 00000000..9e541756 --- /dev/null +++ b/app/src/main/res/values-es/strings.xml @@ -0,0 +1,128 @@ + + + + Habilita Night Light + Interruptor maestro para activar/desactivar Night Light. + Sin acceso a la base + Se necesita acceso a la base para que Night Light funcione. + Incompatible + Su núcleo no soporta KCAL. KCAL es una función de ajuste que controla la pantalla para equipos Qualcomm. Se necesita que se soporte KCAL para que Night Light funcione. + Interuptor automático + Activar automáticamente Night Light entre el tiempo especificado. Night Light será desactivado automáticamente fuera de este rango de tiempo. + Hora de inicio + Hora de fin + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + Encendido + Apagado + Sobre + Night Light usa KCAL, que es una función de ajuste que controla la pantalla para la nueva generación de equipos Qualcomm, para ajustar la intensidad de la luz azul, permitiendo que sea más cómodo para tus ojos cuando estés usando tu telefono en la oscuridad y te ayudaría a dormirte. Ya que hace cambios a nivel del driver, y no usa superposiciones de software, es amigable con la batería y el cambio puede ser visto en toda la pantalla. + Alternado encendido/apagado +  (siguiente día) + Usa tiempos de amanecer/atardecer + Incapaz de localizar tu última ubicación conocida. + ¿Te gusta esta aplicación? + Si te gusta esta aplicación, usted puede considerar obtener la versión de donación de esta aplicación. Aunque no posee las características adicionales que tiene esta versión, muestra su apoyo y aprecio a la aplicación, y motivará al desarrollador y soporte el desarrollo de esta aplicación :) + Mantener los valores actuales de KCAL + Sobre + Contribuyentes + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 85e42d0cbd8b5686d8bd72179f8bb8c76ecc0e9c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:15 +0530 Subject: [PATCH 020/490] New translations strings.xml (Thai) --- app/src/donate/res/values-th/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-th/strings.xml diff --git a/app/src/donate/res/values-th/strings.xml b/app/src/donate/res/values-th/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-th/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From e7590937384988a60359aee66599f25af1091b19 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:17 +0530 Subject: [PATCH 021/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-th/strings.xml diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-th/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From ca59c7b7595b6803e2c42db16770cf661f5df24c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:18 +0530 Subject: [PATCH 022/490] New translations strings.xml (Turkish) --- app/src/donate/res/values-tr/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-tr/strings.xml diff --git a/app/src/donate/res/values-tr/strings.xml b/app/src/donate/res/values-tr/strings.xml new file mode 100644 index 00000000..2ff24096 --- /dev/null +++ b/app/src/donate/res/values-tr/strings.xml @@ -0,0 +1,6 @@ + + + + Teşekkür ederim + Uygulamanın bağış sürümü edinmek için :) + From 8bf50e306e1434a6a211fe0b2c6cf4dc8620fce1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:19 +0530 Subject: [PATCH 023/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-ga/strings.xml diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-ga/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From aaf62ed994793ae239bb7e7cb8af7c123f459514 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:21 +0530 Subject: [PATCH 024/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-id/strings.xml diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml new file mode 100644 index 00000000..a5aa784d --- /dev/null +++ b/app/src/main/res/values-id/strings.xml @@ -0,0 +1,128 @@ + + + + Mengaktifkan Lampu Malam + Beralih master untuk mengaktifkan/menonaktifkan Lampu Malam. + Tidak ada akses root + Akses Root diperlukan untuk Cahaya Malam untuk bekerja. + Tidak kompatibel + Kernel anda tidak mendukung KCAL. KCAL adalah sebuah display driver tuning fitur untuk perangkat Qualcomm. KCAL dukungan yang dibutuhkan untuk Cahaya Malam untuk bekerja. + Saklar otomatis + Secara otomatis mengaktifkan Lampu Malam antara waktu yang ditentukan. Malam Cahaya akan otomatis dinonaktifkan di luar rentang waktu ini. + Waktu di mulai + Waktu berakhir + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + Aktif + Nonaktif + Tentang + Cahaya malam menggunakan KCAL, yang merupakan display driver tuning fitur untuk generasi baru perangkat Qualcomm, untuk mengatur intensitas cahaya biru, yang membuatnya lebih nyaman untuk mata anda ketika anda menggunakan ponsel anda dalam gelap dan membantu anda tertidur. Sejak itu membuat perubahan di tingkat driver, dan tidak menggunakan software apapun overlay, ini adalah baterai ramah dan perubahan dapat dilihat di mana-mana pada layar. + Beralih hidup/mati +  (hari Berikutnya) + Gunakan timing matahari terbit/matahari terbenam + Tidak bisa mendapatkan lokasi terakhir yang diketahui. + Seperti aplikasi ini? + Jika anda menyukai aplikasi ini, anda dapat mempertimbangkan untuk mendapatkan versi donasi dari aplikasi. Meskipun ia datang dengan fitur tambahan dari versi ini, itu menunjukkan dukungan dan apresiasi kepada aplikasi, dan hal ini akan memotivasi para pengembang dan mendukung pengembangan aplikasi ini :) + Melestarikan saat ini KCAL nilai-nilai + Tentang + Kontributor + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From bbb8deedbcc61fa60d1b742cea18f4c18b7aa63a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:23 +0530 Subject: [PATCH 025/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-zh/strings.xml diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-zh/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 1b92a92880438766c26046c6bfe93338d9c71cfb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:24 +0530 Subject: [PATCH 026/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-fi/strings.xml diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-fi/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 86efb6534cfb88884760c308939db21b889ac13a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:25 +0530 Subject: [PATCH 027/490] New translations strings.xml (Croatian) --- app/src/donate/res/values-hr/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-hr/strings.xml diff --git a/app/src/donate/res/values-hr/strings.xml b/app/src/donate/res/values-hr/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-hr/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From adf8312dc551807004899f3bef9ed525db836a26 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:27 +0530 Subject: [PATCH 028/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-hr/strings.xml diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-hr/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 72e887043f815109c7a3f9aff1dc82514da3f693 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:28 +0530 Subject: [PATCH 029/490] New translations strings.xml (Czech) --- app/src/donate/res/values-cs/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-cs/strings.xml diff --git a/app/src/donate/res/values-cs/strings.xml b/app/src/donate/res/values-cs/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-cs/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 987f66a6d00cf37925adb37c051c40d717773ac0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:30 +0530 Subject: [PATCH 030/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-cs/strings.xml diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-cs/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From b8f4730dda213750e360557949c11394029309c4 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:31 +0530 Subject: [PATCH 031/490] New translations strings.xml (Dutch) --- app/src/donate/res/values-nl/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-nl/strings.xml diff --git a/app/src/donate/res/values-nl/strings.xml b/app/src/donate/res/values-nl/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-nl/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 72b12f3dc2776e4e7efe125026e0b40ad7cdca58 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:32 +0530 Subject: [PATCH 032/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-nl/strings.xml diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-nl/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 836485a40b7c43e627507e2ee04876a18a03cb4b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:35 +0530 Subject: [PATCH 033/490] New translations strings.xml (Filipino) --- app/src/donate/res/values-fil/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-fil/strings.xml diff --git a/app/src/donate/res/values-fil/strings.xml b/app/src/donate/res/values-fil/strings.xml new file mode 100644 index 00000000..345546b6 --- /dev/null +++ b/app/src/donate/res/values-fil/strings.xml @@ -0,0 +1,6 @@ + + + + Salamat + Para sa pagkuha ng donasyon na bersyon ng app :) + From 344f77606c78da37869761e79422675ef629b40e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:36 +0530 Subject: [PATCH 034/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 128 ++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-fil/strings.xml diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml new file mode 100644 index 00000000..de7fcb4f --- /dev/null +++ b/app/src/main/res/values-fil/strings.xml @@ -0,0 +1,128 @@ + + + + Paganahin ang Night Light + Master switch upang paganahin / huwag paganahin ang Night Light. + Walang root access + Kinakailangan ang root access para sa Night Light upang gumana. + Hindi kaayon + Ang iyong kernel ay hindi sumusuporta sa KCAL. Ang KCAL ay isang display na tampok ng tuning ng driver para sa mga aparatong Qualcomm. KCAL support ay kailangan para sa Night Light upang gumana. + Awtomatikong switch + Awtomatikong paganahin ang Night Light sa pagitan ng tinukoy na oras. Ay awtomatikong hindi pinagana ang Night Light sa labas ng saklaw ng oras na ito. + Oras ng simula + Oras ng pagtatapos + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + Bukas + Off + Tungkol Dito + Ang Night Light ay gumagamit ng KCAL, na isang display tuning feature para sa mga bagong henerasyon ng mga aparatong Qualcomm, upang ayusin ang intensity ng blue light, na ginagawang mas kumportable para sa iyong mga mata kapag ginagamit mo ang iyong telepono sa madilim at tinutulungan kang matulog. Dahil gumagawa ito ng mga pagbabago sa antas ng driver, at hindi ito gumagamit ng anumang overlay ng software, ito ay friendly na baterya at ang pagbabago ay makikita sa lahat ng dako sa display. + I-toggle ang on / off +  (Susunod na araw) + Gumamit ng mga oras ng paglubog ng araw / pagsikat ng araw + Hindi makuha ang iyong huling kilalang lokasyon. + Gusto ang app na ito? + Kung gusto mo ang app na ito, maaari mong isaalang-alang ang pagkuha ng bersyon ng donasyon ng app. Kahit na wala itong dagdag na tampok kaysa sa bersyon na ito, ipinapakita nito ang iyong suporta at pagpapahalaga sa app, at ito ay ganyakin ang developer at suportahan ang pagbuo ng app :) + Panatilihin ang mga kasalukuyang halaga ng KCAL + Tungkol Dito + Mga Kontribyutor + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 5f3fff03be509a774d310dbc8c3490d3fe911e11 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:37 +0530 Subject: [PATCH 035/490] New translations strings.xml (Finnish) --- app/src/donate/res/values-fi/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-fi/strings.xml diff --git a/app/src/donate/res/values-fi/strings.xml b/app/src/donate/res/values-fi/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-fi/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 1c381482cbe603a9bc6ac8d67de186eda5e611b9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:38 +0530 Subject: [PATCH 036/490] New translations strings.xml (French) --- app/src/donate/res/values-fr/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-fr/strings.xml diff --git a/app/src/donate/res/values-fr/strings.xml b/app/src/donate/res/values-fr/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-fr/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 1a413be4948d3d158cdd66ffa23a31ef282ae2a8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:41 +0530 Subject: [PATCH 037/490] New translations strings.xml (Indonesian) --- app/src/donate/res/values-id/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-id/strings.xml diff --git a/app/src/donate/res/values-id/strings.xml b/app/src/donate/res/values-id/strings.xml new file mode 100644 index 00000000..e3a23686 --- /dev/null +++ b/app/src/donate/res/values-id/strings.xml @@ -0,0 +1,6 @@ + + + + Terima kasih + Untuk mendapatkan versi donasi dari aplikasi ini :) + From 8e8d5f89a46dec4f8553a938645e7ca99b6549ab Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:43 +0530 Subject: [PATCH 038/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-fr/strings.xml diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-fr/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 6f32d2c4cfc4aab1943329a0039950094a75fe6e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:44 +0530 Subject: [PATCH 039/490] New translations strings.xml (German) --- app/src/donate/res/values-de/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-de/strings.xml diff --git a/app/src/donate/res/values-de/strings.xml b/app/src/donate/res/values-de/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-de/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From ea5ac16714602dd2b6a990e9a161df254483b0d4 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:46 +0530 Subject: [PATCH 040/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-de/strings.xml diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-de/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From a6a132e1447b3e33da3d15e7fcf145d15ce3fb99 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:47 +0530 Subject: [PATCH 041/490] New translations strings.xml (Greek) --- app/src/donate/res/values-el/strings.xml | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/app/src/donate/res/values-el/strings.xml b/app/src/donate/res/values-el/strings.xml index c1f3aae0..b5668fd3 100644 --- a/app/src/donate/res/values-el/strings.xml +++ b/app/src/donate/res/values-el/strings.xml @@ -1,4 +1,6 @@ - - Ευχαριστώ - Για την απόκτηση της έκδοσης δωρεάς της εφαρμογής :) + + + + Ευχαριστώ + Για την απόκτηση της έκδοσης δωρεάς της εφαρμογής :) From a72760fd36ebb69f9ca2012017c4050b852a3959 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:49 +0530 Subject: [PATCH 042/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 119 ++++++++++++++++++++++--- 1 file changed, 107 insertions(+), 12 deletions(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index d5341b4b..92067175 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -1,33 +1,128 @@ - - + + + Ενεργοποίηση Night Light Γενικός διακόπτης για ενεργοποίηση/απενεργοποίηση του Night Light. - Δεν υπάρχει root πρόσβαση Απαιτείται root πρόσβαση για να λειτουργήσει το Night Light. - Ασύμβατο Ο kernel σας δεν υποστηρίζει KCAL. Το KCAL είναι ένα χαρακτηριστικό συντονισμού των οθονών για συσκευές Qualcomm. Η υποστήριξη KCAL είναι απαραίτητη για να λειτουργήσει το Night Light. - Αυτόματος διακόπτης Αυτόματη ενεργοποίηση του Night Light στο ορισμένο χρονικό διάστημα. Το Night Light θα απενεργοποιηθεί αυτόματα εκτός αυτού του διαστήματος. Ώρα έναρξης Ώρα λήξης - + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time Ενεργό Ανενεργό - Σχετικά Το Night Light χρησιμοποιεί KCAL, το οποίο είναι ένα χαρακτηριστικό συντονισμού των οθονών για συσκευές Qualcomm νέας γενιάς, για την ρύθμιση έντασης του μπλε φωτός, που καθιστά πιο ξεκούραστη για τα μάτια την χρήση του κινητού στο σκοτάδι και βοηθά στον ύπνο. Εφόσον πραγματοποιεί αλλαγές σε επίπεδο driver και δεν χρησιμοποιεί επικαλύψεις λογισμικού, δεν έχει αντίκτυπο στην μπαταρία και η αλλαγή είναι ορατή σε όλη την οθόνη. - Ενεργοποίηση/Απενεργοποίηση -  (Επόμενη ημέρα) - Χρήση ωρών Ανατολής/Δύσης Ηλίου - Δεν ήταν δυνατή η λήψη της τελευταίας σας γνωστής τοποθεσίας. - Σας αρέσει η εφαρμογή; Αν σας αρέσει η εφαρμογή, μπορείτε να αποκτήσετε την έκδοση δωρεάς της εφαρμογής. Παρόλο που δεν περιέχει επιπλέον λειτουργίες από αυτή την έκδοση, δείχνει την υποστήριξη και την εκτίμησή σας για την εφαρμογή, θα δώσει κίνητρο στον developer και θα υποστηρίξει την ανάπτυξη της εφαρμογής :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version From 017b84cfb8a128ea5698394e54379c9237b37cdd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:50 +0530 Subject: [PATCH 043/490] New translations strings.xml (Hebrew) --- app/src/donate/res/values-he/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-he/strings.xml diff --git a/app/src/donate/res/values-he/strings.xml b/app/src/donate/res/values-he/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-he/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From 7418076f59a00d283bcc62007f3a1c86cb46911d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:51 +0530 Subject: [PATCH 044/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-he/strings.xml diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-he/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 5022c6d96469e980b58f8d3030a97fc03fcbb88d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:53 +0530 Subject: [PATCH 045/490] New translations strings.xml (Hindi) --- app/src/donate/res/values-hi/strings.xml | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 app/src/donate/res/values-hi/strings.xml diff --git a/app/src/donate/res/values-hi/strings.xml b/app/src/donate/res/values-hi/strings.xml new file mode 100644 index 00000000..6d777f9b --- /dev/null +++ b/app/src/donate/res/values-hi/strings.xml @@ -0,0 +1,6 @@ + + + + Thank you + For getting the donation version of the app :) + From f18f9ff2289e785d903afd29bbe8aad618286df9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:54 +0530 Subject: [PATCH 046/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-hi/strings.xml diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml new file mode 100644 index 00000000..6419981a --- /dev/null +++ b/app/src/main/res/values-hi/strings.xml @@ -0,0 +1,128 @@ + + + + Enable Night Light + Master switch to enable/disable Night Light. + No root access + Root access is needed for Night Light to work. + Incompatible + Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. + Automatic switch + Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Start time + End time + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + On + Off + About + Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. + Toggle on/off +  (Next day) + Use sunset/sunrise timings + Unable to get your last known location. + Like this app? + If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) + Preserve current KCAL values + About + Contributors + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From 45a924f3ac537c49a2af72808bca2f164d47a7fb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 26 Nov 2018 22:03:56 +0530 Subject: [PATCH 047/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 128 +++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 app/src/main/res/values-tr/strings.xml diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml new file mode 100644 index 00000000..b5e16549 --- /dev/null +++ b/app/src/main/res/values-tr/strings.xml @@ -0,0 +1,128 @@ + + + + Night Lamb\'ı etkinleştir + Night Light\'ı etkinleştirmek/devredışı bırakmak için ana halteri kullan. + Üst üye erişimi yok + Night Light\'ın çalışması için üst üye erişimi gerekiyor. + Uyumsuz + Çekirdeğiniz KCAL\'ı desteklemiyor. KCAL, Qualcomm aygıtları için hazırlanan bir ekran sürücüsü ayarlama özelliğidir. Night Light\'ın çalışması için KCAL desteği gereklidir. + Otomatik geçiş + Belirlenen zamanlarda Night Light\'ı otomatik olarak etkinleştir. Bu zaman aralığı dışında Night Light otomatik olarak devredışı bırakılacaktır. + Başlama zamanı + Bitiş zamanı + Enable dark hours + This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. + Dark hours start time + Time must be in between schedule start time and end time + Açık + Kapalı + Hakkında + Night Lamb, karanlıkta telefonunuzu kullandığınızda gözleriniz için daha uygun olan mavi ışığın yoğunluğunu ayarlamak amacıyla Qualcomm cihazlarının yeni üretimi için ekran sürücüsü ayarlama özelliği olan KCAL\'ı kullanır ve uykuya dalmanıza yardım eder. Sürücü seviyesinde değişiklikler yaptığı ve yazılım bindirmesi kullanmadığı için batarya dostudur ve değişim ekranın her yerinde görülebilir. + Aç/kapa +  (Sonraki gün) + Günbatımı/gündoğumu zamanlamalarını kullan + Bilinen son konumunuz alınamıyor. + Bu uygulamayı sevdiniz mi? + Eğer bu uygulamayı severseniz, uygulamanın bağış sürümünü almayı düşünebilirsiniz. Bu sürümden daha fazla özellikli olmamasına rağmen, uygulamaya desteğinizi ve memnuniyetinizi gösterir ve geliştiricileri motive edecek ve uygulamanın gelişimini destekleyecektir:) + Mevcut KCAL değerlerini koru + Hakkında + Katkıda Bulunanlar + Color Temperature + Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. + Set on boot delay + Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. + Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. + KCAL Backup + KCAL Backup Settings + You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Red + Green + Blue + Configure + Profiles + Create profile + Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, + Edit profile + Edit an existing profile + Setting mode + Night Light switch + Setting unavailable + Profile name + A profile with same name already exists, please try another name. + No profiles created + Tap the + button to start setting up a profile + Apply + Edit + Delete + Are you sure want to delete the %1$s profile? + Confirm + Are you sure you want use %1$s profile as a part of your Tasker plugin routine? + Night Light disabled + To use tasker plugin, you must enable Master Switch first. + Master controls + Color controls + Set on boot + Automation + List of profiles created + Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. + Backup current KCAL values every time before Night Light is enabled + F.A.Q + Q. Why does the app require root access? + Root access is required to modify KCAL values. This is impossible without root access. + Q. What does the master switch do? + It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. + Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. + Q. What does the KCAL backup options do? + This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Q. Since KCAL values are reset after boot, will the app will still be able function after that? + Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. + Q. What\'s with the various filtering modes? + There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. + Q. What are minimum and maximum intensities? + Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). + Q. Why does the app require Location permission? + Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. + Q. Is there any way for the user to toggle Night Light on/off without opening the app? + Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. + Q. How does the quick toggles work? + Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. + Q. What are dark hours? + Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). + Q. What is the point of having dark hours? + The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. + Q. Do I get any extra feature in the donate version? + No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Dashboard + Night Light is on + Night Light is off + Night Light is disabled + Turn on master switch to enable Night Light. + Automatic schedule is not configured. + Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). + Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Settings + Manual Mode + Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. + Intensity type + Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. + Maximum + Minimum + Toggle intensity + KCAL Driver + KCAL Driver Information + Implementation name + Switch path + RGB file path(s) + Format specification + Version + Overview + Theme + Enable light theme + Enables light theme with light background and slightly different looks. + Show support + Rate this app + Donate using PayPal + Get donate version + From d6dff1e5f389b7d4c683a7f691128bcc933182ff Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 00:50:44 +0530 Subject: [PATCH 048/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index b5e16549..67492083 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -1,7 +1,7 @@ - Night Lamb\'ı etkinleştir + Night Light\'ı etkinleştir Night Light\'ı etkinleştirmek/devredışı bırakmak için ana halteri kullan. Üst üye erişimi yok Night Light\'ın çalışması için üst üye erişimi gerekiyor. From 026806aa69fcee29cf95ff6486106511bddfa00d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:23 +0530 Subject: [PATCH 049/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From ddbb22af4b0fab92b5fb79ecf96db36791639cb3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:25 +0530 Subject: [PATCH 050/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 7761b1cdeef39887793306a7cc279d1a4a505be8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:26 +0530 Subject: [PATCH 051/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From dc9f24fc81f9c11a8bf7a971a5dab591ec178439 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:28 +0530 Subject: [PATCH 052/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From ccf669516382f372ff024a000b958f088050024f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:30 +0530 Subject: [PATCH 053/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 00ba87c0..dcf39ab5 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From ecbf4ec567828f50e2e0c4f9409db38b66e6a6d5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:32 +0530 Subject: [PATCH 054/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 4d73955dc5cf7c755c21213a7a2214fd189a764a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:34 +0530 Subject: [PATCH 055/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 613d91f4..a20bd083 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 61473057cdc714b9631451158bd8d1cebab47ed9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:35 +0530 Subject: [PATCH 056/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 9e541756..8f7cc35d 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 4e54cd057244a284a5390b13ad26704a657bd831 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:37 +0530 Subject: [PATCH 057/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 69a5874e1da90c12b68f421ede505231a12d8e10 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:39 +0530 Subject: [PATCH 058/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 162c426a332774f97c3235157bb0dff8e3bf663f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:41 +0530 Subject: [PATCH 059/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index a5aa784d..3958e00f 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 155ef1e8fbb65c288cf037ba034f12a83172f205 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:42 +0530 Subject: [PATCH 060/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 821693eada1da724befe22918f088f5fb7c5357d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:44 +0530 Subject: [PATCH 061/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From bdef977e85af082f37522b3315b2175819bfc129 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:46 +0530 Subject: [PATCH 062/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 1d53f697253f56bbf26fb201a3a1c9de618fdef2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:48 +0530 Subject: [PATCH 063/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From d66c64abd742b6067716a1204c29442ae525583b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:49 +0530 Subject: [PATCH 064/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 6fd3871bb73ff7065f833c776c3325c55feae56f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:51 +0530 Subject: [PATCH 065/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index de7fcb4f..e30e50b2 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 6254c6e8fa1a7b1572b53401479543c60b9b365b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:53 +0530 Subject: [PATCH 066/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 2368abfd52bdddd11eafad5bdfb876bfc44c1862 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:55 +0530 Subject: [PATCH 067/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 4ca58b33b0af379db7c948a91bf5b04ec53b1499 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:56 +0530 Subject: [PATCH 068/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 92067175..12068ffb 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 2d3aaf514060aa91488de0d40087df39a5036c86 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:51:58 +0530 Subject: [PATCH 069/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From c0e5098a87ed0fdfa2b9ba29d845b3685bfa7ece Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:52:00 +0530 Subject: [PATCH 070/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 6419981a..9fd1789e 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From 70babc35d825429157aab1deae0b75989cd4646d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 02:52:01 +0530 Subject: [PATCH 071/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 67492083..5c927872 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -102,7 +102,7 @@ Automatic schedule is not configured. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Settings + Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type @@ -125,4 +125,5 @@ Rate this app Donate using PayPal Get donate version + Translate this app From fe5ae97041e27dd79b273eea5331e63128d3b460 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 15:02:58 +0530 Subject: [PATCH 072/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index dcf39ab5..c318c9ab 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -110,20 +110,20 @@ Maximum Minimum Toggle intensity - KCAL Driver + Sterownik KCAL KCAL Driver Information Implementation name Switch path RGB file path(s) Format specification - Version + Wersja Overview - Theme + Motyw Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version - Translate this app + Wesprzyj przez PayPal + Uzyskaj wersję dotacyjną aplikacji + Przetłumacz aplikację From ef246f1f4ff2ee2aaee266e2176d7ceb280b5303 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Tue, 27 Nov 2018 15:13:05 +0530 Subject: [PATCH 073/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 32 +++++++++++++------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index c318c9ab..88650d05 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -33,7 +33,7 @@ Ustaw opóźnienie po uruchomieniu telefonu Ustaw opóźnienie po którym Night Light przywróci ustawienia i wdroży je po uruchomieniu. Ustawienia Night Light będą ustawione z %s opóźnieniem. Wygląda na to że ustawienia Night Light zostały przywrócone ale nie zostały wdrożone. Zalecane jest wydłużenie czasu opóżnienia po jakim ustawienia zostaną wdrożone. - KCAL Backup + Kopia zapasowa KCAL Ustawienia zapasowe KCAL Tutaj możesz skonfigurować twoje stare ustawienia KCAL. Te ustawienia będą używane gdy night light nie będzie używany Czerwony @@ -68,10 +68,10 @@ Profile to kolekcja ustawień które możesz ustawić za pomocą jednego kliknięcie, albo pozwlić by aplikacji taka jak Tasker używajac swoich automatycznch profili zrobiła to za ciebie. Backup current KCAL values every time before Night Light is enabled F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. + Q. Dlaczego aplikacja wymaga dostępu do konta roota? + Dostęp do roota jest wymagany do modyfikowania wartości KCAL. Jest to niemożliwe bez dostępu do konta roota. + Q. jak działa przełącznik główny? + Umożliwia on w zasadzie włączenie wszystkich funkcji aplikacji. Jeśli główny przełącznik jest wyłączony, żadna z funkcji nie zostanie uruchomiona, i na odwrót. Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. Q. What does the KCAL backup options do? @@ -107,22 +107,22 @@ Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. Intensity type Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. - Maximum + Maksymalny Minimum Toggle intensity Sterownik KCAL - KCAL Driver Information - Implementation name - Switch path - RGB file path(s) - Format specification + Informacje o sterowniku KCAL + Nazwa implementacji KCAL + Ścieżka przełącznika + Ścieżki plików RGB + Specyfikacja formatu Wersja - Overview + Opis Motyw - Enable light theme - Enables light theme with light background and slightly different looks. - Show support - Rate this app + Włącz jasny motyw + Włącz jasny motyw z jasnym tłem i nieco innym wyglądem. + Pokaż wsparcie + Oceń tę aplikację Wesprzyj przez PayPal Uzyskaj wersję dotacyjną aplikacji Przetłumacz aplikację From 73b5b74ec8f285af53993cccd177044ea721338b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 29 Nov 2018 18:31:48 +0530 Subject: [PATCH 074/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 88650d05..a4f8b0fb 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -11,10 +11,10 @@ Automatycznie uruchamiaj Night Light pomiędzy ustalonymi godzinami. Night Light będzie automatycznie wyłączany za tymi zakresami godzin. Godzina uruchomienia Godzina wyłączenia - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Włącz ciemne godziny + Umożliwia to stosowanie minimalnych i maksymalnych natężeń w ramach zautomatyzowanego harmonogramu. Jeśli włączone, zostaną zastosowane minimalne natężenie od godziny rozpoczęcia do godziny rozpoczęcia czasu ciemnego, a maksymalna intensywność będzie używany następnie do czasu zakończenia harmonogramu. + Godzina rozpoczęcia ciemnych godzin + Czas musi być pomiędzy harmonogramem czas rozpoczęcia i czas zakończenia Włącz Wyłącz O aplikacji @@ -66,7 +66,7 @@ Automatyzacja Lista stworzonych profili Profile to kolekcja ustawień które możesz ustawić za pomocą jednego kliknięcie, albo pozwlić by aplikacji taka jak Tasker używajac swoich automatycznch profili zrobiła to za ciebie. - Backup current KCAL values every time before Night Light is enabled + Kopii zapasowej bieżącej wartości KCAL każdorazowo przed aktywacja Night Light jest włączona F.A.Q Q. Dlaczego aplikacja wymaga dostępu do konta roota? Dostęp do roota jest wymagany do modyfikowania wartości KCAL. Jest to niemożliwe bez dostępu do konta roota. @@ -94,12 +94,12 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. - Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. + Pulpit nawigacyjny + Night Light jest włączony + Night Light jest wyłączony + Night Light wyłączony + Włączyć główny przełącznik, aby włączyć Night Light. + Nie skonfigurowano automatycznego harmonogramu. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). Options From 1c22826ff442e54c42130a61e127b0b707e14906 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 29 Nov 2018 23:11:35 +0530 Subject: [PATCH 075/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index a4f8b0fb..29c76edb 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -101,15 +101,15 @@ Włączyć główny przełącznik, aby włączyć Night Light. Nie skonfigurowano automatycznego harmonogramu. Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). - Options - Manual Mode - Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Poza okresem automatycznego harmonogramu. Night Light zostanie automatycznie uruchomiony za %1$d godzin(y). + Opcje + Tryb ręczny + Ręczne sterowanie kolorami KCAL daje pełną swobodę nad doborem temperatury barwowej wyświetlacza, tak, aby potrzeby były zaspokojone. + Typ intensywności Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maksymalny Minimum - Toggle intensity + Przełącz intensywność Sterownik KCAL Informacje o sterowniku KCAL Nazwa implementacji KCAL From 3371d81ce17d10b6cf82f9d4e0f7cb08c3f926cc Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:46 +0530 Subject: [PATCH 076/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 2fdb1c0c7b7aeccba05564c672559c8072112277 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:47 +0530 Subject: [PATCH 077/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 51d6d8f8b45f1c8bdc0dcf6da197935d717df013 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:49 +0530 Subject: [PATCH 078/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 3748e98aee9b537d1e563ac41d0d2585fef5c28f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:50 +0530 Subject: [PATCH 079/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 8f7cc35d..1070d8d9 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -23,8 +23,6 @@  (siguiente día) Usa tiempos de amanecer/atardecer Incapaz de localizar tu última ubicación conocida. - ¿Te gusta esta aplicación? - Si te gusta esta aplicación, usted puede considerar obtener la versión de donación de esta aplicación. Aunque no posee las características adicionales que tiene esta versión, muestra su apoyo y aprecio a la aplicación, y motivará al desarrollador y soporte el desarrollo de esta aplicación :) Mantener los valores actuales de KCAL Sobre Contribuyentes @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 38b0839eb4602776be6d98ad2be503f41ed3efd7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:51 +0530 Subject: [PATCH 080/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index a20bd083..6f4c8f9f 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -23,8 +23,6 @@  (Следующий день) От заката до рассвета Невозможно получить ваше последнее известное местоположение. - Вам нравится это приложение? - Если вам нравится это приложение, то вы можете рассмотреть возможность получения пожертвованной версии приложения. Хотя он поставляется без дополнительных функций, чем эта версия, он показывает вашу поддержку и оценку для приложения, и он будет мотивировать разработчика и поддерживать разработку приложения :) Оберегать исходные параметры KCAL О приложении Авторы @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From c5b320e9089276bcf7919ce809fe1af53cd4e77d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:53 +0530 Subject: [PATCH 081/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 03ec43720fa42c30d24973a781599c71e1b6b39f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:54 +0530 Subject: [PATCH 082/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 29c76edb..ff10a493 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -23,8 +23,6 @@  (Następny dzień) Użyj ustawień czasu słońca / wschodu słońca Nie można uzyskać ostatnio znanej lokalizacji - Lubisz tą aplikcaje? - Jeśli podoba ci się ta aplikacja, możesz rozważyć uzyskanie płatnej wersji aplikacji. Mimo że nie ma ona żadnych dodatkowych funkcji niż ta wersja, pokazujesz swoje wsparcie i uznanie dla aplikacji, a to zmotywuje programistę i wspomoże rozwój aplikacji :) Zachowaj aktualne wartości KCAL O aplikacji Współtwórcy @@ -123,7 +121,6 @@ Włącz jasny motyw z jasnym tłem i nieco innym wyglądem. Pokaż wsparcie Oceń tę aplikację - Wesprzyj przez PayPal - Uzyskaj wersję dotacyjną aplikacji + Donate Przetłumacz aplikację From 67e203ec24410bcc8cd8c2bf00b84defeb417403 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:56 +0530 Subject: [PATCH 083/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 4054335e8961913a97affb37c5c9ef1fe1cc3c5f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:57 +0530 Subject: [PATCH 084/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 57aa814a89bb63fcb5c2594735b5e8ce1f8dba58 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:11:59 +0530 Subject: [PATCH 085/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 4fd24ba7a89b080be4f56ebb090c6f87abf10840 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:00 +0530 Subject: [PATCH 086/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From c07a905251c6f77fde2d7fdc4d56de24705840c9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:02 +0530 Subject: [PATCH 087/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 3958e00f..d06558f3 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -23,8 +23,6 @@  (hari Berikutnya) Gunakan timing matahari terbit/matahari terbenam Tidak bisa mendapatkan lokasi terakhir yang diketahui. - Seperti aplikasi ini? - Jika anda menyukai aplikasi ini, anda dapat mempertimbangkan untuk mendapatkan versi donasi dari aplikasi. Meskipun ia datang dengan fitur tambahan dari versi ini, itu menunjukkan dukungan dan apresiasi kepada aplikasi, dan hal ini akan memotivasi para pengembang dan mendukung pengembangan aplikasi ini :) Melestarikan saat ini KCAL nilai-nilai Tentang Kontributor @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From ee73b73e9b13d69d39e66fdeb8c364641c58d349 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:04 +0530 Subject: [PATCH 088/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From a6c4840fbdc33c4033fc25642966ab5133b7aa64 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:05 +0530 Subject: [PATCH 089/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 467d4133344666233ee5d1ac346c40eea352d2d8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:07 +0530 Subject: [PATCH 090/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 5e3efc59ec343a1b5762c1e65a26f00ff2acc430 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:09 +0530 Subject: [PATCH 091/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 12068ffb..72b962b5 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -23,8 +23,6 @@  (Επόμενη ημέρα) Χρήση ωρών Ανατολής/Δύσης Ηλίου Δεν ήταν δυνατή η λήψη της τελευταίας σας γνωστής τοποθεσίας. - Σας αρέσει η εφαρμογή; - Αν σας αρέσει η εφαρμογή, μπορείτε να αποκτήσετε την έκδοση δωρεάς της εφαρμογής. Παρόλο που δεν περιέχει επιπλέον λειτουργίες από αυτή την έκδοση, δείχνει την υποστήριξη και την εκτίμησή σας για την εφαρμογή, θα δώσει κίνητρο στον developer και θα υποστηρίξει την ανάπτυξη της εφαρμογής :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From c7b33b6b58349ef3a88654d474d23010550297af Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:10 +0530 Subject: [PATCH 092/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 1fb8694ee11852254117c10eb5043682dcf04819 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:11 +0530 Subject: [PATCH 093/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From e9b6722cc9ef88621a48e74ac0724e1392eb55a8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:13 +0530 Subject: [PATCH 094/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From db838664a4d3cdd24aacb28e39b9ac9df771800a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:14 +0530 Subject: [PATCH 095/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index e30e50b2..b87e4457 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -23,8 +23,6 @@  (Susunod na araw) Gumamit ng mga oras ng paglubog ng araw / pagsikat ng araw Hindi makuha ang iyong huling kilalang lokasyon. - Gusto ang app na ito? - Kung gusto mo ang app na ito, maaari mong isaalang-alang ang pagkuha ng bersyon ng donasyon ng app. Kahit na wala itong dagdag na tampok kaysa sa bersyon na ito, ipinapakita nito ang iyong suporta at pagpapahalaga sa app, at ito ay ganyakin ang developer at suportahan ang pagbuo ng app :) Panatilihin ang mga kasalukuyang halaga ng KCAL Tungkol Dito Mga Kontribyutor @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 87e0185ab3428e50d3e3f4bde95ae22994424300 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:16 +0530 Subject: [PATCH 096/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From e5585d4f4e605f49ae86386bbcf3c962840e360e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:17 +0530 Subject: [PATCH 097/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 9fd1789e..e4f8393e 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -23,8 +23,6 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Like this app? - If you like this app, you can consider getting the donation version of the app. Although it comes with no extra features than this version, it shows your support and appreciation to the app, and it will motivate the developer and support the development of the app :) Preserve current KCAL values About Contributors @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From 6f246bda43c8ebe7856cc6a84f323b7717acf7df Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 11 Jan 2019 17:12:19 +0530 Subject: [PATCH 098/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 5c927872..bf74f699 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -23,8 +23,6 @@  (Sonraki gün) Günbatımı/gündoğumu zamanlamalarını kullan Bilinen son konumunuz alınamıyor. - Bu uygulamayı sevdiniz mi? - Eğer bu uygulamayı severseniz, uygulamanın bağış sürümünü almayı düşünebilirsiniz. Bu sürümden daha fazla özellikli olmamasına rağmen, uygulamaya desteğinizi ve memnuniyetinizi gösterir ve geliştiricileri motive edecek ve uygulamanın gelişimini destekleyecektir:) Mevcut KCAL değerlerini koru Hakkında Katkıda Bulunanlar @@ -123,7 +121,6 @@ Enables light theme with light background and slightly different looks. Show support Rate this app - Donate using PayPal - Get donate version + Donate Translate this app From b5ad78ac42c0b54fdd15ea772554d16bce296fb8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 9 Feb 2019 23:26:06 +0530 Subject: [PATCH 099/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index ff10a493..04be8671 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -121,6 +121,6 @@ Włącz jasny motyw z jasnym tłem i nieco innym wyglądem. Pokaż wsparcie Oceń tę aplikację - Donate + Wesprzyj Przetłumacz aplikację From 5823d117133e31d5c1f83a8eda3b36a68b327fd4 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 Feb 2019 11:41:23 +0530 Subject: [PATCH 100/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 1070d8d9..54de6c53 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -11,7 +11,7 @@ Activar automáticamente Night Light entre el tiempo especificado. Night Light será desactivado automáticamente fuera de este rango de tiempo. Hora de inicio Hora de fin - Enable dark hours + Activar horas oscuras This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time From feac13736db8fd7e11fde2069a0970f0f5ca3b9c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:39 +0530 Subject: [PATCH 101/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From c17a4dda2f0bb5d0433219bd3c6172b1e6e6f48a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:41 +0530 Subject: [PATCH 102/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From edd3014cbfd4a1eea01c868a16f0dc2360f30a25 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:42 +0530 Subject: [PATCH 103/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From adcd403be320163b20343e319426ea647ce2ead0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:44 +0530 Subject: [PATCH 104/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 54de6c53..3bd19bb3 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From bf534f85903bdd5486c88b6f271f217caa94da25 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:45 +0530 Subject: [PATCH 105/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 6f4c8f9f..8ec12873 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From b884516050f6544b019b48487fee2fab7380f2df Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:47 +0530 Subject: [PATCH 106/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 9bc5151d5b78b024528cb3c13f28ee36ffb358ab Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:48 +0530 Subject: [PATCH 107/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 04be8671..c8e48d36 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -116,11 +116,12 @@ Specyfikacja formatu Wersja Opis - Motyw Włącz jasny motyw Włącz jasny motyw z jasnym tłem i nieco innym wyglądem. Pokaż wsparcie Oceń tę aplikację Wesprzyj Przetłumacz aplikację + Show info + Shows information about various controls From 3f9f17c5af3aac08d91e6568953043f980eddc66 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:50 +0530 Subject: [PATCH 108/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 65b2911967c473b389e66892e25433d7c5906818 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:51 +0530 Subject: [PATCH 109/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 1fa9ec855df5611bfe2ae164f72188c9ec6b38c0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:52 +0530 Subject: [PATCH 110/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 1348bd06dc5b3bd45def8fcee14264bbe962fe2f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:54 +0530 Subject: [PATCH 111/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 8be0aaf949858a238d8e65bdc842b6ea8c95eca1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:55 +0530 Subject: [PATCH 112/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index d06558f3..783915df 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From e3870b3bc805eb051f460f2b9aecd3f75332599a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:57 +0530 Subject: [PATCH 113/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 945cf7d8c517f22580fe265f43d8829c6e17c27e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:12:58 +0530 Subject: [PATCH 114/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 6d0b9e1bfe3eb7de19758eee20558677eace04ff Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:13:00 +0530 Subject: [PATCH 115/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From bf0961102a59c1f468ec2bd67645fa9d2e251c94 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:13:02 +0530 Subject: [PATCH 116/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 72b962b5..3634fd47 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From b56a24f0e05aae414a6a29bf4acd728e9b64afda Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:13:05 +0530 Subject: [PATCH 117/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 395bbf588f8635cb9a81d493a548aab1ab99ceee Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:13:09 +0530 Subject: [PATCH 118/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 25801db82cb2c6314c4936278012de36b369ce6d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:13:11 +0530 Subject: [PATCH 119/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 0792caec951923ea27e4471fd15a2968ebe4f6c9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:13:13 +0530 Subject: [PATCH 120/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index b87e4457..b566608a 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 428cddaaff93fb8c69fc4048f0525dfc7de4f742 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:13:15 +0530 Subject: [PATCH 121/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 3e638513016d6ea7e2527139cbc609e545219ce5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:13:16 +0530 Subject: [PATCH 122/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index e4f8393e..04ac766b 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 1f941f7630d12e73aa087d1fd1b6d38dc784d715 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 3 Apr 2019 22:13:18 +0530 Subject: [PATCH 123/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index bf74f699..4782c737 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -116,11 +116,12 @@ Format specification Version Overview - Theme Enable light theme Enables light theme with light background and slightly different looks. Show support Rate this app Donate Translate this app + Show info + Shows information about various controls From 6b7b19d0a9ccf360aeec61861b6fe24934d108b8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 20:13:05 +0530 Subject: [PATCH 124/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 783915df..6cbcfbbf 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -1,14 +1,14 @@ - Mengaktifkan Lampu Malam - Beralih master untuk mengaktifkan/menonaktifkan Lampu Malam. + Mengaktifkan Night Light + Beralih master untuk mengaktifkan/menonaktifkan Night Light. Tidak ada akses root Akses Root diperlukan untuk Cahaya Malam untuk bekerja. Tidak kompatibel Kernel anda tidak mendukung KCAL. KCAL adalah sebuah display driver tuning fitur untuk perangkat Qualcomm. KCAL dukungan yang dibutuhkan untuk Cahaya Malam untuk bekerja. Saklar otomatis - Secara otomatis mengaktifkan Lampu Malam antara waktu yang ditentukan. Malam Cahaya akan otomatis dinonaktifkan di luar rentang waktu ini. + Secara otomatis mengaktifkan Night Light antara waktu yang ditentukan. Malam Cahaya akan otomatis dinonaktifkan di luar rentang waktu ini. Waktu di mulai Waktu berakhir Enable dark hours From 776bb0a3d57f042682c345c4b35f2afb2b749a91 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 20:53:03 +0530 Subject: [PATCH 125/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index c8e48d36..f8d1d3c4 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -9,19 +9,19 @@ Twój kernel nie obsługuje KCAL. KCAL to podrasowany sterownik ekranowy dla telefonów z procesorem Qualcomm. By aplikacja działała potrzebne jest wsparcie dla KCAL Automatyczny przełacznik Automatycznie uruchamiaj Night Light pomiędzy ustalonymi godzinami. Night Light będzie automatycznie wyłączany za tymi zakresami godzin. - Godzina uruchomienia + Godzina włączenia Godzina wyłączenia Włącz ciemne godziny Umożliwia to stosowanie minimalnych i maksymalnych natężeń w ramach zautomatyzowanego harmonogramu. Jeśli włączone, zostaną zastosowane minimalne natężenie od godziny rozpoczęcia do godziny rozpoczęcia czasu ciemnego, a maksymalna intensywność będzie używany następnie do czasu zakończenia harmonogramu. Godzina rozpoczęcia ciemnych godzin - Czas musi być pomiędzy harmonogramem czas rozpoczęcia i czas zakończenia + Czas musi być pomiędzy harmonogramem czasu rozpoczęcia i czasu zakończenia Włącz Wyłącz O aplikacji - Night light używa KCAL, który jest podrasowanym sterownikiem ekranowynm dla urządzeń z procesorem od Qualcomm. Pozwala on na dostosowanie intensywności zielonego i niebieskiego swiatła co czyni ekran bardziej konfortowy do czytania w ciemnych pomieszczeniach i pozwala także łatwiej zasnąć. Zmiany które wprowadza są w warstwie sterownika i nie używa on żadnego oprogramowania nadpisującego ekran. Także jest on przyjazny dla bateri i zmiany możemy zobaczyć w każdej aplikacji + Night light używa KCAL, który jest podrasowanym sterownikiem ekranowynm dla urządzeń z procesorem od Qualcomm. Pozwala on na dostosowanie intensywności zielonego i niebieskiego światła co czyni ekran bardziej komfortowy do czytania w ciemnych pomieszczeniach i pozwala także łatwiej zasnąć. Zmiany które wprowadza są w warstwie sterownika i nie używa on żadnego oprogramowania nadpisującego ekran. Także jest on przyjazny dla baterii i zmiany możemy zobaczyć w każdej aplikacji. Włącz/Wyłącz  (Następny dzień) - Użyj ustawień czasu słońca / wschodu słońca + Użyj ustawień czasu zachodu słońca / wschodu słońca Nie można uzyskać ostatnio znanej lokalizacji Zachowaj aktualne wartości KCAL O aplikacji @@ -33,11 +33,11 @@ Wygląda na to że ustawienia Night Light zostały przywrócone ale nie zostały wdrożone. Zalecane jest wydłużenie czasu opóżnienia po jakim ustawienia zostaną wdrożone. Kopia zapasowa KCAL Ustawienia zapasowe KCAL - Tutaj możesz skonfigurować twoje stare ustawienia KCAL. Te ustawienia będą używane gdy night light nie będzie używany + Tutaj możesz skonfigurować stare ustawienia KCAL. Te ustawienia będą używane gdy Night Light nie będzie używany. Czerwony Zielony Niebieski - Skonfiguruj ustawienia zapasowe KCAL + Ustawienia Profile Utwórz profil Utwórz profil (kolekcje ustawień), które możesz ustawic za pomocą jednego kliknięcia, albo użyć aplikacji takiej jak Tasker który zrobi to za ciebie From 30be5bcbe632f1825b73bb999a456a3a4aa0d496 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:12:49 +0530 Subject: [PATCH 126/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 6d157830cf23a563c06c406e46f332e12fc480d8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:12:51 +0530 Subject: [PATCH 127/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From e24bb396bf41e2656f1ad0c7f32b641827dfd29a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:12:52 +0530 Subject: [PATCH 128/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 600a33e56bbf2ecc8299f2b646a4be9cfc7816d3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:12:54 +0530 Subject: [PATCH 129/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 3bd19bb3..8b51adbd 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - Encendido - Apagado Sobre Night Light usa KCAL, que es una función de ajuste que controla la pantalla para la nueva generación de equipos Qualcomm, para ajustar la intensidad de la luz azul, permitiendo que sea más cómodo para tus ojos cuando estés usando tu telefono en la oscuridad y te ayudaría a dormirte. Ya que hace cambios a nivel del driver, y no usa superposiciones de software, es amigable con la batería y el cambio puede ser visto en toda la pantalla. Alternado encendido/apagado @@ -24,7 +22,6 @@ Usa tiempos de amanecer/atardecer Incapaz de localizar tu última ubicación conocida. Mantener los valores actuales de KCAL - Sobre Contribuyentes Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 2eb3bc5a1c98a259877046bdaa5e09a02f18ec66 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:12:55 +0530 Subject: [PATCH 130/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 8ec12873..84218046 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - Вкл. - Выкл. О приложении Ночной свет использует KCAL, который является функцией настройки драйвера дисплея для нового поколения Qualcomm устройств. Ночной свет регулирует интенсивность синего света, что делает его более удобным для ваших глаз, когда вы используете телефон в тёмное время суток и это помогает вам заснуть. Поскольку данное приложение вносит изменения на уровне драйвера и не использует никакие наложения программного обеспечения, то батарея более дружественная, и изменение можно увидеть повсюду на дисплее. Вкл./Откл. @@ -24,7 +22,6 @@ От заката до рассвета Невозможно получить ваше последнее известное местоположение. Оберегать исходные параметры KCAL - О приложении Авторы Цветовая температура Здесь вы устанавливаете значение цветовой температуры. Более низкие температуры лучше подходят для просмотра в недостаточной освещенности. From a288ee5fc2644ad5dd41999c2f894c904032dca8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:12:57 +0530 Subject: [PATCH 131/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 20d61bade7eb2343fdd4273bc178bdf61c2dcb90 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:12:59 +0530 Subject: [PATCH 132/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index f8d1d3c4..4c77e6bd 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -15,8 +15,6 @@ Umożliwia to stosowanie minimalnych i maksymalnych natężeń w ramach zautomatyzowanego harmonogramu. Jeśli włączone, zostaną zastosowane minimalne natężenie od godziny rozpoczęcia do godziny rozpoczęcia czasu ciemnego, a maksymalna intensywność będzie używany następnie do czasu zakończenia harmonogramu. Godzina rozpoczęcia ciemnych godzin Czas musi być pomiędzy harmonogramem czasu rozpoczęcia i czasu zakończenia - Włącz - Wyłącz O aplikacji Night light używa KCAL, który jest podrasowanym sterownikiem ekranowynm dla urządzeń z procesorem od Qualcomm. Pozwala on na dostosowanie intensywności zielonego i niebieskiego światła co czyni ekran bardziej komfortowy do czytania w ciemnych pomieszczeniach i pozwala także łatwiej zasnąć. Zmiany które wprowadza są w warstwie sterownika i nie używa on żadnego oprogramowania nadpisującego ekran. Także jest on przyjazny dla baterii i zmiany możemy zobaczyć w każdej aplikacji. Włącz/Wyłącz @@ -24,7 +22,6 @@ Użyj ustawień czasu zachodu słońca / wschodu słońca Nie można uzyskać ostatnio znanej lokalizacji Zachowaj aktualne wartości KCAL - O aplikacji Współtwórcy Temperatura kolorów Wartośc temperatury kolorów. Im niższa temperatura tym konfortowsze jest patrzenie na ekran przy słabym świetle. From 525b058eaa42064796489ef44259ea3e7c5732ec Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:01 +0530 Subject: [PATCH 133/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From e76d342b800d676fab44a9caab32fad943c705fa Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:03 +0530 Subject: [PATCH 134/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 82e283e48a15ce34c8192a9f0c0a67cfe1131f6e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:05 +0530 Subject: [PATCH 135/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 43457c59e6b20eee0df16c5a30cde732a595e68e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:09 +0530 Subject: [PATCH 136/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 93beb53896ee781538d64f343ba7eb892aa023ff Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:10 +0530 Subject: [PATCH 137/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 6cbcfbbf..62824112 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - Aktif - Nonaktif Tentang Cahaya malam menggunakan KCAL, yang merupakan display driver tuning fitur untuk generasi baru perangkat Qualcomm, untuk mengatur intensitas cahaya biru, yang membuatnya lebih nyaman untuk mata anda ketika anda menggunakan ponsel anda dalam gelap dan membantu anda tertidur. Sejak itu membuat perubahan di tingkat driver, dan tidak menggunakan software apapun overlay, ini adalah baterai ramah dan perubahan dapat dilihat di mana-mana pada layar. Beralih hidup/mati @@ -24,7 +22,6 @@ Gunakan timing matahari terbit/matahari terbenam Tidak bisa mendapatkan lokasi terakhir yang diketahui. Melestarikan saat ini KCAL nilai-nilai - Tentang Kontributor Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From e9f3e9593f06608b91561cae2cf950d67d20c12a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:12 +0530 Subject: [PATCH 138/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 41c02ad57a4b0bfcdd64586a8ead8010e1b0dd2b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:13 +0530 Subject: [PATCH 139/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 558b04bf814227cd33bd9f69b559e9b8d1956bd5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:15 +0530 Subject: [PATCH 140/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From da95db8be026210cbc5012b8695363103acaca65 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:17 +0530 Subject: [PATCH 141/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 3634fd47..6aecec59 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - Ενεργό - Ανενεργό Σχετικά Το Night Light χρησιμοποιεί KCAL, το οποίο είναι ένα χαρακτηριστικό συντονισμού των οθονών για συσκευές Qualcomm νέας γενιάς, για την ρύθμιση έντασης του μπλε φωτός, που καθιστά πιο ξεκούραστη για τα μάτια την χρήση του κινητού στο σκοτάδι και βοηθά στον ύπνο. Εφόσον πραγματοποιεί αλλαγές σε επίπεδο driver και δεν χρησιμοποιεί επικαλύψεις λογισμικού, δεν έχει αντίκτυπο στην μπαταρία και η αλλαγή είναι ορατή σε όλη την οθόνη. Ενεργοποίηση/Απενεργοποίηση @@ -24,7 +22,6 @@ Χρήση ωρών Ανατολής/Δύσης Ηλίου Δεν ήταν δυνατή η λήψη της τελευταίας σας γνωστής τοποθεσίας. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 64d6059d25be74104fa86424f8743c3e8e846789 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:18 +0530 Subject: [PATCH 142/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From d9e7b75d20e47da125db576a4abf70e541aa6a77 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:20 +0530 Subject: [PATCH 143/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 3be09374f61a7f26ff8006c2e783d8cfc386655c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:21 +0530 Subject: [PATCH 144/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 4c7464aba1355341238af30c55d542c2f845b7d2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:23 +0530 Subject: [PATCH 145/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index b566608a..e3b9eaf0 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - Bukas - Off Tungkol Dito Ang Night Light ay gumagamit ng KCAL, na isang display tuning feature para sa mga bagong henerasyon ng mga aparatong Qualcomm, upang ayusin ang intensity ng blue light, na ginagawang mas kumportable para sa iyong mga mata kapag ginagamit mo ang iyong telepono sa madilim at tinutulungan kang matulog. Dahil gumagawa ito ng mga pagbabago sa antas ng driver, at hindi ito gumagamit ng anumang overlay ng software, ito ay friendly na baterya at ang pagbabago ay makikita sa lahat ng dako sa display. I-toggle ang on / off @@ -24,7 +22,6 @@ Gumamit ng mga oras ng paglubog ng araw / pagsikat ng araw Hindi makuha ang iyong huling kilalang lokasyon. Panatilihin ang mga kasalukuyang halaga ng KCAL - Tungkol Dito Mga Kontribyutor Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From ee021085ce82969ee1aefc6973879e0a9eac42c9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:25 +0530 Subject: [PATCH 146/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From f9f018122c7af53784393cb24e56134e5576bd5e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:26 +0530 Subject: [PATCH 147/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 04ac766b..6a0d0df8 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - On - Off About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off @@ -24,7 +22,6 @@ Use sunset/sunrise timings Unable to get your last known location. Preserve current KCAL values - About Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 9f4d6f1adb6ce3d482a25d99da5ecc4d2ec2d826 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 10 Apr 2019 21:13:28 +0530 Subject: [PATCH 148/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 4782c737..a03fd311 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -15,8 +15,6 @@ This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. Dark hours start time Time must be in between schedule start time and end time - Açık - Kapalı Hakkında Night Lamb, karanlıkta telefonunuzu kullandığınızda gözleriniz için daha uygun olan mavi ışığın yoğunluğunu ayarlamak amacıyla Qualcomm cihazlarının yeni üretimi için ekran sürücüsü ayarlama özelliği olan KCAL\'ı kullanır ve uykuya dalmanıza yardım eder. Sürücü seviyesinde değişiklikler yaptığı ve yazılım bindirmesi kullanmadığı için batarya dostudur ve değişim ekranın her yerinde görülebilir. Aç/kapa @@ -24,7 +22,6 @@ Günbatımı/gündoğumu zamanlamalarını kullan Bilinen son konumunuz alınamıyor. Mevcut KCAL değerlerini koru - Hakkında Katkıda Bulunanlar Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. From 45bfc86407de59906233b80bbb5173ecf23c778d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:43 +0530 Subject: [PATCH 149/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From b6bb08050491b3f095902b11a3c27cf33f70c557 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:45 +0530 Subject: [PATCH 150/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 501321125284ec9ab8d8dfa90dee7e4144da5089 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:47 +0530 Subject: [PATCH 151/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From a36723fe6b1fae914a56baf4eb6fbe44f966a490 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:48 +0530 Subject: [PATCH 152/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 8b51adbd..80f055b1 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 76f50bc7c53f9c77e1d1d8893b767662d90ba36b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:50 +0530 Subject: [PATCH 153/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 84218046..37105c93 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 8080357f77cc58231bdf3a1d1ec513a12c2c3efa Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:51 +0530 Subject: [PATCH 154/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 49bc899688bcfead4f97698e666eb61bfc6ccb40 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:53 +0530 Subject: [PATCH 155/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 4c77e6bd..45d26baa 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Pulpit nawigacyjny Night Light jest włączony Night Light jest wyłączony From 8aa9f83324a7566dc8bb31cd26f2743395bfc4a9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:54 +0530 Subject: [PATCH 156/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From daa72c4297c6ff5533d3acb31fd59135521fa78a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:56 +0530 Subject: [PATCH 157/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 2eafc8d19cc3badba0b4cf867258a538ed5f2d69 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:21:58 +0530 Subject: [PATCH 158/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 0b7531d2f186ca891344a23c9e3c20f672a81a1f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:00 +0530 Subject: [PATCH 159/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From b284bd6029213a886a3634d1a4fe6bee5f79ee99 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:01 +0530 Subject: [PATCH 160/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 62824112..57455fbc 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From c3284a61fb0693aa233096e8d0d2bce81098b1bf Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:03 +0530 Subject: [PATCH 161/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 70c5ceabe287addcc5b5023a640bb5a648ca4946 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:05 +0530 Subject: [PATCH 162/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 3443b3af0fb967e46fa8b9a35117dc87229c03cb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:06 +0530 Subject: [PATCH 163/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 694ff4009b1cda9a27b0d18d0c115bced9700a86 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:08 +0530 Subject: [PATCH 164/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 6aecec59..e51ad395 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 129805ce976aae46a2ad44ab7fe139accfe1f03b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:09 +0530 Subject: [PATCH 165/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 8f2222470a86854c2be3e3c79ddbf9194abc046f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:11 +0530 Subject: [PATCH 166/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From d1e1f0980b7be2309efe1587f721b82adb409de0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:13 +0530 Subject: [PATCH 167/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 0dbe70095a412ed0ca6c4c9bbbf9490e775edbf3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:14 +0530 Subject: [PATCH 168/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index e3b9eaf0..6540745d 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From a89d467eaf3730ceef70f18e67d90af31ddbca55 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:15 +0530 Subject: [PATCH 169/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From e7a65fb3dffec91b744cd4cfdb1147871743db6e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:17 +0530 Subject: [PATCH 170/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 6a0d0df8..adbb2b1a 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From 4deaa99464f5f2a8dd3bdbbd1871f58bda3ba886 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 4 Aug 2019 13:22:19 +0530 Subject: [PATCH 171/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index a03fd311..c0966978 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -89,6 +89,7 @@ The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. Q. Do I get any extra feature in the donate version? No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. + Links Dashboard Night Light is on Night Light is off From c34bd26b822d5dbe6f4ea8e43eaa08d085fd1fee Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:07 +0530 Subject: [PATCH 172/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 8f846be85a4ed9ae515761da395ee0bc1fda2097 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:09 +0530 Subject: [PATCH 173/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From de00333e7347721b30f49bc0ca5f1734ea45ec2f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:10 +0530 Subject: [PATCH 174/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From cf9e1b587daa00ce9ac6340ccd89d953a95cecde Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:12 +0530 Subject: [PATCH 175/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 80f055b1..2fba89b3 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -25,7 +25,7 @@ Contribuyentes Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 4f794b668fea1e991f436f7daf3f32c60a459ffb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:13 +0530 Subject: [PATCH 176/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 37105c93..961b0576 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -25,7 +25,7 @@ Авторы Цветовая температура Здесь вы устанавливаете значение цветовой температуры. Более низкие температуры лучше подходят для просмотра в недостаточной освещенности. - Установить задержку запуска + Delay Установите задержку, после которой параметры ночного света будут восстановлены и применены после загрузки. Параметры ночного света будут применены после %s сек. Похоже, параметры ночного света были восстановлены, но они не применились после последней загрузки. Рассмотрите возможность увеличения задержки, чтобы параметры можно было успешно восстановить и применить после загрузки. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 89de5b1ebdc1f517cfafc3199dc59a1fc4dfa658 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:15 +0530 Subject: [PATCH 177/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 520b87f96736cfd5c38ff10a8ca16f361235e3a7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:16 +0530 Subject: [PATCH 178/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 45d26baa..eada7a95 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -25,7 +25,7 @@ Współtwórcy Temperatura kolorów Wartośc temperatury kolorów. Im niższa temperatura tym konfortowsze jest patrzenie na ekran przy słabym świetle. - Ustaw opóźnienie po uruchomieniu telefonu + Delay Ustaw opóźnienie po którym Night Light przywróci ustawienia i wdroży je po uruchomieniu. Ustawienia Night Light będą ustawione z %s opóźnieniem. Wygląda na to że ustawienia Night Light zostały przywrócone ale nie zostały wdrożone. Zalecane jest wydłużenie czasu opóżnienia po jakim ustawienia zostaną wdrożone. Kopia zapasowa KCAL @@ -122,4 +122,7 @@ Przetłumacz aplikację Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 0b8d077f53ebda1f20ce8c8591c8954f1b1255de Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:18 +0530 Subject: [PATCH 179/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 5a55d5d86115042e126a3a0dcd347af79a67e218 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:20 +0530 Subject: [PATCH 180/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 02432ace5cb3d06ed2760330d5a8f44b28a261e7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:21 +0530 Subject: [PATCH 181/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From f8fcde5289dfc010f3deb73a5ba5024b501ef0be Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:23 +0530 Subject: [PATCH 182/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From c66a51432b63d0b544903efcef0ba93b144d8707 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:24 +0530 Subject: [PATCH 183/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 57455fbc..9b74283d 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -25,7 +25,7 @@ Kontributor Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From ce559c77b8d0e4922e11536bf424bc9f234a8ec1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:26 +0530 Subject: [PATCH 184/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From a38fdee1169124287efa3af9985ac4a5ac163ef7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:27 +0530 Subject: [PATCH 185/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 0b8778b1ebd296c1684c7793306e3f87c0c0cc8d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:29 +0530 Subject: [PATCH 186/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 227c26a9a7350b5e8ff4269420fde1a898bc8a99 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:30 +0530 Subject: [PATCH 187/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index e51ad395..652370ae 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 1aa070d5cc969cf30f0c191f35a6b797d5f7e1c4 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:31 +0530 Subject: [PATCH 188/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From f2d5dd0898f2ab7f11f9728ac0c5e7f811331b95 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:33 +0530 Subject: [PATCH 189/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From e9ecaf7f43bc211e25a0526402537b075feec224 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:34 +0530 Subject: [PATCH 190/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From f32d3eb3e67001dfac1c91718948bdec497cbd13 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:36 +0530 Subject: [PATCH 191/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index 6540745d..e010ea32 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -25,7 +25,7 @@ Mga Kontribyutor Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From d4dca95153a5ca3372a3f91c00a76c74682dda35 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:37 +0530 Subject: [PATCH 192/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 43b26e816f05be8fc60b9965f60ad9c63853e048 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:39 +0530 Subject: [PATCH 193/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index adbb2b1a..3eb7ed0b 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -25,7 +25,7 @@ Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 3332aac47de8d3b82b600c354607b951683e0bfd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Sep 2019 20:53:40 +0530 Subject: [PATCH 194/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index c0966978..b6290d3f 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -25,7 +25,7 @@ Katkıda Bulunanlar Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Set on boot delay + Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup @@ -122,4 +122,7 @@ Translate this app Show info Shows information about various controls + Enabled + Night Light settings will be restored on boot. + Night Light settings will not be restored on boot. From 8bb208fb936f205caa5f25534bc7e89efcd87343 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 00:25:03 +0530 Subject: [PATCH 195/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 34 +++++++++++++------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 3eb7ed0b..ed55c6c3 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -1,23 +1,23 @@ - Enable Night Light - Master switch to enable/disable Night Light. - No root access - Root access is needed for Night Light to work. - Incompatible - Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. - Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. - Start time - End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time - About - Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. - Toggle on/off + Abilita Night Light + Interruttore principale per attivare/disattivare Night Light. + Nessun accesso Root + È necessario l\'accesso root per far funzionare Night Light. + Incompatibile + Il tuo kernel non supporta KCAL. KCAL driver per il controllo dei colori del display per i dispositivi Qualcomm. Il supporto KCAL è necessario per far funzionare Night Light. + Interruttore automatico + Attiva automaticamente Night Light nell\'intervallo specificato. Night Light verrà disabilitato automaticamente al di fuori di questo intervallo di tempo. + Orario di inizio + Ora di fine + Abilita le ore scure + Ciò consente l\'uso di intensità minime e massime come parte della pianificazione automatica. Se abilitato, l\'intensità minima verrà applicata dall\'ora di inizio sino alle ore scure e la massima intensità verrà applicata fino al termine del programma. + Ora di inizio delle ore scure + L\'orario deve essere compreso tra orario di inizio e ora di fine + Info su + Night Light utilizza KCAL, che è una funzione di controllo dei driver per i dispositivi di nuova generazione Qualcomm, per regolare l\'intensità della luce blu, che rende più confortevole gli occhi quando usi il telefono al buio e ti aiuta ad addormentarti. Dal momento che agisce a livello del driver e non utilizza sovrapposizioni software, non influenza la durata della batteria e il cambiamento può essere visto ovunque sul display. + Attiva/Disattiva  (Next day) Use sunset/sunrise timings Unable to get your last known location. From ae371107b56ec9b2f1577c4d0be4f6cbd1685ed3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 00:34:48 +0530 Subject: [PATCH 196/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index ed55c6c3..7c44e445 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -18,8 +18,8 @@ Info su Night Light utilizza KCAL, che è una funzione di controllo dei driver per i dispositivi di nuova generazione Qualcomm, per regolare l\'intensità della luce blu, che rende più confortevole gli occhi quando usi il telefono al buio e ti aiuta ad addormentarti. Dal momento che agisce a livello del driver e non utilizza sovrapposizioni software, non influenza la durata della batteria e il cambiamento può essere visto ovunque sul display. Attiva/Disattiva -  (Next day) - Use sunset/sunrise timings +  (giorno successivo) + Usa i tempi del tramonto/alba Unable to get your last known location. Preserve current KCAL values Contributors From 7aaf1dc1ba408afd1fe41b864fa9cba69d02b327 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 01:14:32 +0530 Subject: [PATCH 197/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 7c44e445..66c20c63 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -19,7 +19,7 @@ Night Light utilizza KCAL, che è una funzione di controllo dei driver per i dispositivi di nuova generazione Qualcomm, per regolare l\'intensità della luce blu, che rende più confortevole gli occhi quando usi il telefono al buio e ti aiuta ad addormentarti. Dal momento che agisce a livello del driver e non utilizza sovrapposizioni software, non influenza la durata della batteria e il cambiamento può essere visto ovunque sul display. Attiva/Disattiva  (giorno successivo) - Usa i tempi del tramonto/alba + Usa orari dei tramonto/alba Unable to get your last known location. Preserve current KCAL values Contributors From 8cd957e419bcd56e355916c4b85c52d0ea251f13 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 01:24:08 +0530 Subject: [PATCH 198/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 44 +++++++++++++------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 66c20c63..12161477 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -20,28 +20,28 @@ Attiva/Disattiva  (giorno successivo) Usa orari dei tramonto/alba - Unable to get your last known location. - Preserve current KCAL values - Contributors - Color Temperature - Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Delay - Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. - Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. - Red - Green - Blue - Configure - Profiles - Create profile - Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, - Edit profile - Edit an existing profile - Setting mode - Night Light switch + Impossibile ottenere la posizione. + Mantieni i valori KCAL correnti + Hanno contribuito + Temperatura colore + Valore della temperatura colore da impostare. Temperature più basse sono adatte alla scarsa illuminazione. + Ritardo + Imposta il ritardo dopo il quale le impostazioni di Night Light saranno ripristinate e applicate dopo l\'avvio. Le impostazioni di Night Light saranno applicate dopo %s secondi di ritardo. + Sembra che le impostazioni di Night Light siano state ripristinate, ma non è stato possibile applicarle dopo l\'ultimo riavvio. Prova ad aumentare questo ritardo in modo che le impostazioni possano essere ripristinate e applicate dopo l\'avvio. + Backup KCAL + Impostazioni dei backup KCAL + È possibile configurare le vecchie impostazioni di KCAL qui. Queste impostazioni verranno applicate quando Night Light è spenta. + Rosso + Verde + Blu + Configura + Profili + Crea profilo + Crea un profilo (serie di impostazioni), che potrai applicare facilmente con un solo click, o puoi usare app come Tasker per applicarlo, + Modifica profilo + Modifica un profilo esistente + Modalità impostazione + Interruttore di Night Light Setting unavailable Profile name A profile with same name already exists, please try another name. From e28fa5952408c37c02b28d08cda17a76775027d1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 01:33:55 +0530 Subject: [PATCH 199/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 44 +++++++++++++------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 12161477..16de4ed1 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -42,15 +42,15 @@ Modifica un profilo esistente Modalità impostazione Interruttore di Night Light - Setting unavailable - Profile name - A profile with same name already exists, please try another name. - No profiles created - Tap the + button to start setting up a profile - Apply - Edit - Delete - Are you sure want to delete the %1$s profile? + Impostazione non disponibile + Nome profilo + Profilo con questo nome estite già, prova ad utilizzarne un altro. + Nessun profilo creato + Tocca il pulsante + per iniziare a impostare un profilo + Applica + Modifica + Elimina + Sei sicuro di che voler cancellare il profilo %1$s? Confirm Are you sure you want use %1$s profile as a part of your Tasker plugin routine? Night Light disabled @@ -101,19 +101,19 @@ Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type - Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. - Maximum - Minimum - Toggle intensity - KCAL Driver - KCAL Driver Information - Implementation name - Switch path - RGB file path(s) - Format specification - Version - Overview + Tipo di intensità + Tipo di intensità del colore da applicare. Ci sono 2 tipi di intensità disponibili: Massimo e Minimo. Puoi utilizzare l\'intensità massima in ambienti scuri e l\'intensità minima in ambienti illuminati la sera. Tocca la lampadina nella dashboard per cambiare intensità quando Night Light è attiva. + Massimo + Minimo + Cambia intensità + Driver KCAL + Informazioni driver KCAL + Tipo di implementazione + Cambia percorso + Percorso del file RGB + Specifiche del formato + Versione + Panoramica Enable light theme Enables light theme with light background and slightly different looks. Show support From 35d76690640bc120c34761567dcf518a0846c47c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 01:44:40 +0530 Subject: [PATCH 200/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 28 +++++++++++++------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 16de4ed1..df93c573 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -51,9 +51,9 @@ Modifica Elimina Sei sicuro di che voler cancellare il profilo %1$s? - Confirm - Are you sure you want use %1$s profile as a part of your Tasker plugin routine? - Night Light disabled + Conferma + Sei sicuro di voler utilizzare il profilo %1$s come parte della tua routine del plugin Tasker? + Night Light disabilitata To use tasker plugin, you must enable Master Switch first. Master controls Color controls @@ -114,15 +114,15 @@ Specifiche del formato Versione Panoramica - Enable light theme - Enables light theme with light background and slightly different looks. - Show support - Rate this app - Donate - Translate this app - Show info - Shows information about various controls - Enabled - Night Light settings will be restored on boot. - Night Light settings will not be restored on boot. + Attiva tema chiaro + Attiva il tema chiaro con sfondo chiaro e un aspetto leggermente diverso. + Supporta il progetto + Vota questa app + Dona + Traduci l\'app + Mostra info + Mostra informazioni sui vari controlli + Abilitato + Night Light sarà ripristinata all\'avvio. + Night Light non sarà ripristinata all\'avvio. From bccedefa0fc528334b77839499fc0a4532dd552a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 01:53:30 +0530 Subject: [PATCH 201/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index df93c573..b2269922 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -54,18 +54,18 @@ Conferma Sei sicuro di voler utilizzare il profilo %1$s come parte della tua routine del plugin Tasker? Night Light disabilitata - To use tasker plugin, you must enable Master Switch first. - Master controls - Color controls - Set on boot - Automation - List of profiles created - Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? + Per utilizzare un plugin di Tasker, è necessario abilitare prima lo switch principale. + Controlli switch principale + Controlli colore + Applica all\'avvio + Automazione + Elenco dei profili creati + I profili sono una raccolta di impostazioni che possono essere applicate con un click, o applicali con app come Tasker utilizzando le funzionalità di automazione che forniscono. + Backup dei valori KCAL correnti ogni volta prima che Night Light è abilitata + F.A.Q. + Q. Perché l\'app richiede l\'accesso root? + È richiesto l\'accesso root per modificare i valori KCAL. + Q. Cosa fa lo switch principale? It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. From 347c69f74615965e5e1739e22e388b200679d3a4 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 02:02:13 +0530 Subject: [PATCH 202/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index b2269922..b4ad61a0 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -66,10 +66,10 @@ Q. Perché l\'app richiede l\'accesso root? È richiesto l\'accesso root per modificare i valori KCAL. Q. Cosa fa lo switch principale? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? + In sostanza attiva tutte le funzioni dell\'app. Se lo switch è disattivato, nessuna funzione verrà attivata, e viceversa. + Q. Perché esiste lo switch principale? Dovremmo sempre abilitare lo switch per utilizzare l\'app. + Dal momento che Night Light supporta funzionalità di automazione e l\'attivazione all\'avvio è necessaria la presenza di questo switch. Immagina di avere l\'app installata, ma preferisci non utilizzarla. Se lo switch princiapale non fosse presente, un programma di automazione come Tasker, se configurato in precedenza, potrebbe comunque attivare Night Light. + Q. Come funzionana il backup dei valori KCAL? This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. Q. Since KCAL values are reset after boot, will the app will still be able function after that? Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. From f414bfea9a26c7e1d0fd6e78d9cc0883acc3ef0b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 02:12:18 +0530 Subject: [PATCH 203/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index b4ad61a0..7c974505 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -70,7 +70,7 @@ Q. Perché esiste lo switch principale? Dovremmo sempre abilitare lo switch per utilizzare l\'app. Dal momento che Night Light supporta funzionalità di automazione e l\'attivazione all\'avvio è necessaria la presenza di questo switch. Immagina di avere l\'app installata, ma preferisci non utilizzarla. Se lo switch princiapale non fosse presente, un programma di automazione come Tasker, se configurato in precedenza, potrebbe comunque attivare Night Light. Q. Come funzionana il backup dei valori KCAL? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. + Questa opzione memorizza i valori KCAL personalizzati dall\'utente. In questo modo, quando spegnerai Night Light, i valori da te impostati in precedenza verranno ripristinati. Q. Since KCAL values are reset after boot, will the app will still be able function after that? Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. Q. What\'s with the various filtering modes? From 6e6b224a8afd37598daea96031a6ccc1b9d070a3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Dec 2019 02:23:36 +0530 Subject: [PATCH 204/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 7c974505..aa36f297 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -71,9 +71,9 @@ Dal momento che Night Light supporta funzionalità di automazione e l\'attivazione all\'avvio è necessaria la presenza di questo switch. Immagina di avere l\'app installata, ma preferisci non utilizzarla. Se lo switch princiapale non fosse presente, un programma di automazione come Tasker, se configurato in precedenza, potrebbe comunque attivare Night Light. Q. Come funzionana il backup dei valori KCAL? Questa opzione memorizza i valori KCAL personalizzati dall\'utente. In questo modo, quando spegnerai Night Light, i valori da te impostati in precedenza verranno ripristinati. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? + Q. Poiché i valori KCAL vengono ripristinati dopo un riavvio, l\'applicazione funzionerà comunque? + Sì. Dopo un riavvio, l\'applicazione applicherà nuovamente i valori KCAL, e reimposterà tutte le automazioni. Tuttavia non applicherà i valori KCAL personalizzati dell\'utente (se Night Light dovesse essere spenta dopo l\'avvio). Se per qualche motivo i settaggi non venissero applicati correttamente dopo l\'avvio, considera di aumentare il tempo di attesa. Se il problema persiste, apri un problema su github o nella discussione di XDA. I link si trovano nella sezione Informazioni. + Q. Come funzionano i vari filtri? There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. Q. What are minimum and maximum intensities? Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). From 8ca30ccbe5985c5b89b454d8d01764ad203d74f2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 8 Feb 2020 02:07:23 +0530 Subject: [PATCH 205/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 3eb7ed0b..0949720e 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -1,13 +1,13 @@ - Enable Night Light - Master switch to enable/disable Night Light. - No root access - Root access is needed for Night Light to work. - Incompatible - Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. - Automatic switch + Nachtlicht anschalten + Master-Schalter zum Aktivieren/Deaktivieren des Nachtlichtes. + Kein Root-Zugriff + Root-Zugriff wird benötigt, damit Night Light funktioniert. + Inkompatibel + Dein Kernel unterstützt KCAL nicht. KCAL ist ein Display-Treiber-Tuning Feature für Qualcomm Geräte. KCAL ist benötigt, damit Night Light funktioniert. + Schaltautomatik Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. Start time End time From 6e07b35de2c4c60d964d44db53652e221e16631c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 26 Feb 2020 21:12:28 +0530 Subject: [PATCH 206/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 1 - 1 file changed, 1 deletion(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index aa36f297..310b1df3 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -1,5 +1,4 @@ - Abilita Night Light Interruttore principale per attivare/disattivare Night Light. From 41224a0e5f5921cb229d4025f553d36e486c74e2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 26 Feb 2020 22:32:44 +0530 Subject: [PATCH 207/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 1 - 1 file changed, 1 deletion(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 0949720e..bd5e9cc8 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -1,5 +1,4 @@ - Nachtlicht anschalten Master-Schalter zum Aktivieren/Deaktivieren des Nachtlichtes. From ec74cf2cf88ae9616605bacecb7e43948857d4b3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 26 Feb 2020 22:43:22 +0530 Subject: [PATCH 208/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 1 - 1 file changed, 1 deletion(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 2fba89b3..ee22c1d5 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -1,5 +1,4 @@ - Habilita Night Light Interruptor maestro para activar/desactivar Night Light. From 29a19666645b0b8eb1a8a4e4ab751efa76f93810 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 26 Feb 2020 22:43:24 +0530 Subject: [PATCH 209/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 1 - 1 file changed, 1 deletion(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index b6290d3f..db6799e6 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -1,5 +1,4 @@ - Night Light\'ı etkinleştir Night Light\'ı etkinleştirmek/devredışı bırakmak için ana halteri kullan. From 4a9aa3bbec13bd57a1bb86403b2e3674702b7bb0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:15 +0530 Subject: [PATCH 210/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 29 +++++++++++++++++--------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 310b1df3..df52e94c 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -1,7 +1,8 @@ Abilita Night Light - Interruttore principale per attivare/disattivare Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Nessun accesso Root È necessario l\'accesso root per far funzionare Night Light. Incompatibile @@ -90,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Tipo di intensità + Intensity Tipo di intensità del colore da applicare. Ci sono 2 tipi di intensità disponibili: Massimo e Minimo. Puoi utilizzare l\'intensità massima in ambienti scuri e l\'intensità minima in ambienti illuminati la sera. Tocca la lampadina nella dashboard per cambiare intensità quando Night Light è attiva. Massimo Minimo @@ -112,7 +108,6 @@ Percorso del file RGB Specifiche del formato Versione - Panoramica Attiva tema chiaro Attiva il tema chiaro con sfondo chiaro e un aspetto leggermente diverso. Supporta il progetto @@ -124,4 +119,18 @@ Abilitato Night Light sarà ripristinata all\'avvio. Night Light non sarà ripristinata all\'avvio. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From ab48aede382821fa6f5bceeec65615c172ef11be Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:17 +0530 Subject: [PATCH 211/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 411c501ffe6912913a3f31229035793e48193bfd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:19 +0530 Subject: [PATCH 212/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 961b0576..28256b34 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -1,8 +1,8 @@ - Включить Night Light - Главный переключатель для включения/отключения ночного света. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Нет рут-доступа Для работы Night Light необходим рут-доступ Несовместимый @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 8e78ff37f345b0a3895b9bf1d9a3b101aece2bbc Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:20 +0530 Subject: [PATCH 213/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 60244b39b35f40c584a43512eb3a4ead19238ccd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:22 +0530 Subject: [PATCH 214/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index eada7a95..d99043e7 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -1,8 +1,8 @@ - Uruchom Night Light - Główny przełącznik do włączenia/wyłączenia night light + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Brak dostepu do root Dostęp do root jest potrzebny by Night Light działał Niekompatybilny @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Pulpit nawigacyjny - Night Light jest włączony - Night Light jest wyłączony - Night Light wyłączony - Włączyć główny przełącznik, aby włączyć Night Light. - Nie skonfigurowano automatycznego harmonogramu. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Poza okresem automatycznego harmonogramu. Night Light zostanie automatycznie uruchomiony za %1$d godzin(y). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Opcje Tryb ręczny Ręczne sterowanie kolorami KCAL daje pełną swobodę nad doborem temperatury barwowej wyświetlacza, tak, aby potrzeby były zaspokojone. - Typ intensywności + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maksymalny Minimum @@ -113,7 +108,6 @@ Ścieżki plików RGB Specyfikacja formatu Wersja - Opis Włącz jasny motyw Włącz jasny motyw z jasnym tłem i nieco innym wyglądem. Pokaż wsparcie @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From d38add75b193ce745d165c70687ee57b7c1cff6a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:24 +0530 Subject: [PATCH 215/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 11e98c2bd43f835287532805ab6fce404373b218 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:25 +0530 Subject: [PATCH 216/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 928a7fdbe3615fbebdd2fda16bced2ac66c26895 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:27 +0530 Subject: [PATCH 217/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 372541c7e4e04137802ed04e9fb2b464e91fd58d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:29 +0530 Subject: [PATCH 218/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 2baf2c9901fe360932a372cb97c8126d2fccb0b0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:31 +0530 Subject: [PATCH 219/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 9b74283d..b896343c 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -1,8 +1,8 @@ - Mengaktifkan Night Light - Beralih master untuk mengaktifkan/menonaktifkan Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Tidak ada akses root Akses Root diperlukan untuk Cahaya Malam untuk bekerja. Tidak kompatibel @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From bdacfd5bdbca535416db17b8742577e40806e51d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:33 +0530 Subject: [PATCH 220/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From c1dce0479aed10c1f702e1285f0d6ab96112eaa3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:34 +0530 Subject: [PATCH 221/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 652370ae..ebbb36fd 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -1,8 +1,8 @@ - Ενεργοποίηση Night Light - Γενικός διακόπτης για ενεργοποίηση/απενεργοποίηση του Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Δεν υπάρχει root πρόσβαση Απαιτείται root πρόσβαση για να λειτουργήσει το Night Light. Ασύμβατο @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From ab04f420494dea6e2f308b05d056b0cec0e7a06b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:36 +0530 Subject: [PATCH 222/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 29 +++++++++++++++++--------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index bd5e9cc8..5ea7d0de 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -1,7 +1,8 @@ Nachtlicht anschalten - Master-Schalter zum Aktivieren/Deaktivieren des Nachtlichtes. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Kein Root-Zugriff Root-Zugriff wird benötigt, damit Night Light funktioniert. Inkompatibel @@ -90,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -112,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -124,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 0cd42cb54b708f9cc86537661bf84813b626f90e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:38 +0530 Subject: [PATCH 223/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 163a30bb50068bd06427a14982e6033658dcbbc1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:39 +0530 Subject: [PATCH 224/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 2a060233b3a32c6c997c4d26a0bae941ef14d03b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:41 +0530 Subject: [PATCH 225/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 30 ++++++++++++++++--------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index e010ea32..e89aea27 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -1,8 +1,8 @@ - Paganahin ang Night Light - Master switch upang paganahin / huwag paganahin ang Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Walang root access Kinakailangan ang root access para sa Night Light upang gumana. Hindi kaayon @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 4e1b47a7d36333880cf258e09f4ca318fde999f0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:43 +0530 Subject: [PATCH 226/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From cf9a5ad281bf2cf048b37ca88233d5b032f62b3b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:44 +0530 Subject: [PATCH 227/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From b36521a5f82e1ec32239b6f5ab9b230328179d98 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:46 +0530 Subject: [PATCH 228/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 3fe80e4ed2e143d2d1b511c999bb2633695e65f5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:47 +0530 Subject: [PATCH 229/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 5b23dae6002b9d6bdb33550d1ba247e890d22061 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:49 +0530 Subject: [PATCH 230/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 29 +++++++++++++++++--------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index db6799e6..67fb7fe1 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -1,7 +1,8 @@ Night Light\'ı etkinleştir - Night Light\'ı etkinleştirmek/devredışı bırakmak için ana halteri kullan. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Üst üye erişimi yok Night Light\'ın çalışması için üst üye erişimi gerekiyor. Uyumsuz @@ -90,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -112,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -124,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 75c87402ed2327ce662b496967fce4ec12225fbb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:50 +0530 Subject: [PATCH 231/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 29 +++++++++++++++++--------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index ee22c1d5..b1697b3a 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -1,7 +1,8 @@ Habilita Night Light - Interruptor maestro para activar/desactivar Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Sin acceso a la base Se necesita acceso a la base para que Night Light funcione. Incompatible @@ -90,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -112,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -124,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 234a52282a5773fa462e03eb8251fc52c6038068 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 1 Mar 2020 18:24:52 +0530 Subject: [PATCH 232/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 30 ++++++++++++++++---------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 3eb7ed0b..d0b3436d 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -1,8 +1,8 @@ - Enable Night Light - Master switch to enable/disable Night Light. + Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. + Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access Root access is needed for Night Light to work. Incompatible @@ -91,17 +91,12 @@ No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard - Night Light is on - Night Light is off - Night Light is disabled - Turn on master switch to enable Night Light. - Automatic schedule is not configured. - Inside of automatic schedule time period. Night Light will be automatically turned off in about %1$d hour(s). - Outside of automatic schedule time period. Night Light will be automatically turned on in about %1$d hour(s). + Turns off in %1$d hour(s) + Turns on in %1$d hour(s) Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity type + Intensity Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. Maximum Minimum @@ -113,7 +108,6 @@ RGB file path(s) Format specification Version - Overview Enable light theme Enables light theme with light background and slightly different looks. Show support @@ -125,4 +119,18 @@ Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. + On + Off + Properties + Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. + Actions + Icon shape + Square + Circle + Rounded square + Teardrop + ColorActivity + Info + Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + States From 2294230b7cdb64d9d2672493989ff2f0374ab4ab Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:58:48 +0530 Subject: [PATCH 233/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From db69a6413ca4164c67bd2d1fa8ae5a9f82c4b9ba Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:58:50 +0530 Subject: [PATCH 234/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From ec97281dff5b7ece5159c9492255ed8bc82cdb8d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:58:52 +0530 Subject: [PATCH 235/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From fb02436a41a8a851ccbefb190253b1ea2d3ce1eb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:58:53 +0530 Subject: [PATCH 236/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 409b5eaab75d681ef9caed20fc37134de4ff4ee6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:58:55 +0530 Subject: [PATCH 237/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From dcaa824def205268e05cb412b142ac4067486939 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:58:57 +0530 Subject: [PATCH 238/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index b896343c..12f62b3c 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -1,6 +1,5 @@ - Mengaktifkan Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Tidak ada akses root @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From c40e246fa93bdc3b2cc58073e2d4906bd5791249 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:58:58 +0530 Subject: [PATCH 239/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From a49d642a0bc078bd61e270d9247587816adb5e75 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:00 +0530 Subject: [PATCH 240/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 67fb7fe1..84441d34 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -1,6 +1,5 @@ - Night Light\'ı etkinleştir Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Üst üye erişimi yok @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 40069e113fc4aa6a2005d084934f4610488b9375 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:01 +0530 Subject: [PATCH 241/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 28256b34..40d6f32c 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -1,6 +1,5 @@ - Включить Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Нет рут-доступа @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 11edff41d4f4beae074310f162af823fa02ef168 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:03 +0530 Subject: [PATCH 242/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From d5180c4a9566ecff0239a0223829f2f857add111 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:05 +0530 Subject: [PATCH 243/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index d99043e7..547d708e 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -1,6 +1,5 @@ - Uruchom Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Brak dostepu do root @@ -114,8 +113,6 @@ Oceń tę aplikację Wesprzyj Przetłumacz aplikację - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 69e31f3dd10b8e051034c60a7a029e0bf048dc37 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:06 +0530 Subject: [PATCH 244/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From ce28c1706703a94334c4d86e9bd4e354665e4b69 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:08 +0530 Subject: [PATCH 245/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index b1697b3a..cf3619f7 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -1,6 +1,5 @@ - Habilita Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Sin acceso a la base @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 5d3a1928f76992e7b03b02a2e22f0016ab04419c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:13 +0530 Subject: [PATCH 246/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 7d03c3fdbe5be7e190d272c600fd9b7a943a93bb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:15 +0530 Subject: [PATCH 247/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From d20acfe8506ddfa52b2036cc0d7d2168a63bcff3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:17 +0530 Subject: [PATCH 248/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index df52e94c..6db510c5 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -1,6 +1,5 @@ - Abilita Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Nessun accesso Root @@ -114,8 +113,6 @@ Vota questa app Dona Traduci l\'app - Mostra info - Mostra informazioni sui vari controlli Abilitato Night Light sarà ripristinata all\'avvio. Night Light non sarà ripristinata all\'avvio. From 00807474dd7df2375ff2af01bd2eda6f2bb06706 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:18 +0530 Subject: [PATCH 249/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From e5431835c817c4a5f4cb44b56e33bc40ecde4ae3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:20 +0530 Subject: [PATCH 250/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 02369529e514e5df515b611dc5ddbbc2215aacdd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:21 +0530 Subject: [PATCH 251/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 8a23441997ea289a5000ffa415d9672dfa5254f4 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:23 +0530 Subject: [PATCH 252/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index ebbb36fd..9d73c916 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -1,6 +1,5 @@ - Ενεργοποίηση Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Δεν υπάρχει root πρόσβαση @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From e094a0116f801cb938fd0139841ba4802aa0d359 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:24 +0530 Subject: [PATCH 253/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 5ea7d0de..ec2aa59f 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -1,6 +1,5 @@ - Nachtlicht anschalten Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Kein Root-Zugriff @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 2e0d36d6266f718c3c57796d3f716301681d4562 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:26 +0530 Subject: [PATCH 254/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index d0b3436d..d5401e56 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -1,6 +1,5 @@ - Enable Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. No root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 80515205929bc60c96cf606dae3f3d7bfbad62bc Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 23 May 2020 11:59:28 +0530 Subject: [PATCH 255/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 3 --- 1 file changed, 3 deletions(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index e89aea27..ce8700ae 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -1,6 +1,5 @@ - Paganahin ang Night Light Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. Walang root access @@ -114,8 +113,6 @@ Rate this app Donate Translate this app - Show info - Shows information about various controls Enabled Night Light settings will be restored on boot. Night Light settings will not be restored on boot. From 275830d887cd13b70aae1ce4e0cc00dc34fd6d20 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:00 +0530 Subject: [PATCH 256/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 921bf67bf1d35207d223d1b4a2cef7ffbea147c6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:01 +0530 Subject: [PATCH 257/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 27409136d5332ae59f58092c4c397fd88ec371de Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:03 +0530 Subject: [PATCH 258/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From e9001547b065a48d10cf80bd26ca5da72ce99932 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:04 +0530 Subject: [PATCH 259/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 16c00af020ed4fa1a2c33ff0e774da1d1a890f74 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:06 +0530 Subject: [PATCH 260/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 4a05653bc9f9588cd9eeb3d2e1f7be20c074d08d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:07 +0530 Subject: [PATCH 261/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 12f62b3c..0a00327a 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 83c12d5580e46802dccb84c5072023e9fb308f8b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:08 +0530 Subject: [PATCH 262/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 2e9d3d9af193ca7de3512065babd23087e2487f6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:10 +0530 Subject: [PATCH 263/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 84441d34..32591dd6 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From f61b2773dd1eb7992c29f549274533d287b93a32 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:11 +0530 Subject: [PATCH 264/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 40d6f32c..492e7049 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From d061726e6f1f0a530e47c48757ecf928b408a298 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:13 +0530 Subject: [PATCH 265/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From e951867edcb49c68b2cea5042a2322a1eb2abac3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:14 +0530 Subject: [PATCH 266/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 547d708e..1790cec6 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -61,33 +61,6 @@ Lista stworzonych profili Profile to kolekcja ustawień które możesz ustawić za pomocą jednego kliknięcie, albo pozwlić by aplikacji taka jak Tasker używajac swoich automatycznch profili zrobiła to za ciebie. Kopii zapasowej bieżącej wartości KCAL każdorazowo przed aktywacja Night Light jest włączona - F.A.Q - Q. Dlaczego aplikacja wymaga dostępu do konta roota? - Dostęp do roota jest wymagany do modyfikowania wartości KCAL. Jest to niemożliwe bez dostępu do konta roota. - Q. jak działa przełącznik główny? - Umożliwia on w zasadzie włączenie wszystkich funkcji aplikacji. Jeśli główny przełącznik jest wyłączony, żadna z funkcji nie zostanie uruchomiona, i na odwrót. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Pulpit nawigacyjny Turns off in %1$d hour(s) From 1cb8fa08e8912c26a87d3bc0af815bc448eab886 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:16 +0530 Subject: [PATCH 267/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 2a8b5ec7f10beaa976463f23fb26f096e0c05797 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:17 +0530 Subject: [PATCH 268/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index cf3619f7..2372f1ec 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 1b5464fac1855c68251feb55704704e098ea7160 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:19 +0530 Subject: [PATCH 269/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From d102790d10dcbee9cf71bc8af7b31f00ab463099 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:21 +0530 Subject: [PATCH 270/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 91e453db377d823d17ca20f3a7271575437d9302 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:22 +0530 Subject: [PATCH 271/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 6db510c5..abd0321e 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -61,33 +61,6 @@ Elenco dei profili creati I profili sono una raccolta di impostazioni che possono essere applicate con un click, o applicali con app come Tasker utilizzando le funzionalità di automazione che forniscono. Backup dei valori KCAL correnti ogni volta prima che Night Light è abilitata - F.A.Q. - Q. Perché l\'app richiede l\'accesso root? - È richiesto l\'accesso root per modificare i valori KCAL. - Q. Cosa fa lo switch principale? - In sostanza attiva tutte le funzioni dell\'app. Se lo switch è disattivato, nessuna funzione verrà attivata, e viceversa. - Q. Perché esiste lo switch principale? Dovremmo sempre abilitare lo switch per utilizzare l\'app. - Dal momento che Night Light supporta funzionalità di automazione e l\'attivazione all\'avvio è necessaria la presenza di questo switch. Immagina di avere l\'app installata, ma preferisci non utilizzarla. Se lo switch princiapale non fosse presente, un programma di automazione come Tasker, se configurato in precedenza, potrebbe comunque attivare Night Light. - Q. Come funzionana il backup dei valori KCAL? - Questa opzione memorizza i valori KCAL personalizzati dall\'utente. In questo modo, quando spegnerai Night Light, i valori da te impostati in precedenza verranno ripristinati. - Q. Poiché i valori KCAL vengono ripristinati dopo un riavvio, l\'applicazione funzionerà comunque? - Sì. Dopo un riavvio, l\'applicazione applicherà nuovamente i valori KCAL, e reimposterà tutte le automazioni. Tuttavia non applicherà i valori KCAL personalizzati dell\'utente (se Night Light dovesse essere spenta dopo l\'avvio). Se per qualche motivo i settaggi non venissero applicati correttamente dopo l\'avvio, considera di aumentare il tempo di attesa. Se il problema persiste, apri un problema su github o nella discussione di XDA. I link si trovano nella sezione Informazioni. - Q. Come funzionano i vari filtri? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From e23abe9b24c04d0c49dd10e2df6b0fcf848ad6b4 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:24 +0530 Subject: [PATCH 272/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 451cf24d914c6f6dd1d6b0da7f60571299c8a388 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:25 +0530 Subject: [PATCH 273/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From aceea1887cf288b7666a1e29f5727034bb91bbfc Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:26 +0530 Subject: [PATCH 274/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From c58a0643485441d7046a3bb55ea89fbe0f9aa142 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:28 +0530 Subject: [PATCH 275/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 9d73c916..30746ac1 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 6b86dd3615068e6728168d5d3c37ffef8d3a8f32 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:29 +0530 Subject: [PATCH 276/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index ec2aa59f..df85c1a2 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 8ac26d671a5ec1fb48007eb2b12a25ed567a00a7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:30 +0530 Subject: [PATCH 277/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 27 -------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index d5401e56..01eb6dfc 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From 2b9f15356938f6aa92986acb74b07df982fc4ed5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 15:32:32 +0530 Subject: [PATCH 278/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 27 ------------------------- 1 file changed, 27 deletions(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index ce8700ae..16737939 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -61,33 +61,6 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled - F.A.Q - Q. Why does the app require root access? - Root access is required to modify KCAL values. This is impossible without root access. - Q. What does the master switch do? - It basically enables all the functions of the app. If master switch is off, none of the functions will be enabled, and vice versa. - Q. OK then why does master switch exist? We would have to enable master switch anyway to use the app. - Since Night Light supports features like automation and set on boot, it is necessary for such switch to exist, so that such external requests can be dealt with accordingly. Imagine you have this app installed, but for some reason you don\'t use the app, if master switch was not present at all, a previously set automation schedule could still turn on Night Light. - Q. What does the KCAL backup options do? - This option takes account of the user\'s custom KCAL settings. So that while turning off Night Light, the app is able to restore user\'s settings. - Q. Since KCAL values are reset after boot, will the app will still be able function after that? - Yes. After a reboot, app will re-apply night light values to KCAL, and re-set all the automation schedules. However it does not apply user\'s custom KCAL values (if night light should be off after boot). If for some reason, things were not applied properly after boot, consider increasing Set On boot delay. If the problem persists, please open an issue in github, or mention about the same in XDA thread. Links for them can be found in About section. - Q. What\'s with the various filtering modes? - There are 2 filtering modes available. Color temperature provides a simple yet effective control for filtering out blue light. Range of color temperature supported is from 2500K to 5000K. And the other mode supported is manual KCAL color control to cater for custom RGB color value needs. - Q. What are minimum and maximum intensities? - Minimum and maximum intensities are 2 intensity types which lets the user to set different filter intensity values under each type and use them as per their choice. As the names suggest, it is advisable to set a lower intensity setting under minimum intensity, and a higher intensity under maximum intensity. Minimum intensity may then be used at evenings (dark but lighted environments) and maximum intensity may be used at nights (under pitch dark conditions). - Q. Why does the app require Location permission? - Location permission is required to determine sunset and sunrise timing for your location. Location permission is only asked when you enable automation and use sunset/sunrise timings. Your location is not shared or misused in anyway. - Q. Is there any way for the user to toggle Night Light on/off without opening the app? - Yes. Night Light supports toggling itself on/off from launcher shortcuts and through a tile in quick toggles. You need to add the tile in the quick toggles manually though. - Q. How does the quick toggles work? - Quick toggle can turn on/off Night Light irrespective of automation schedule. If however, the master switch is disabled, toggling on will turn on the master switch as well, so that Night Light can be turned on. Toggling off does not turn off the master switch though. It may seem complicated, but the way it works should provide a good user experience. - Q. What are dark hours? - Dark hours is a time period, usually from the time set by the user to the end of the automatic schedule, during which maximum intensity setting is applied. It works only if automation is enabled. Dark hours should usually be the time you turn off all your lights and go to bed (but still choose to use the device before falling asleep). - Q. What is the point of having dark hours? - The main purpose of dark hours feature is to give the intensity types (minimum and maximum intensity) an automatic control. If dark hours setting is set, minimum intensity is applied from start of the automatic period to this time, and the maximum intensity is applied until the end of the schedule. - Q. Do I get any extra feature in the donate version? - No. Two versions are basically the same functionality wise. Donate version is there if you really love my work and want to show support to it and motivate me to keep on doing the work. It is absolutely fine if you choose not to donate and keep using the generic version. Links Dashboard Turns off in %1$d hour(s) From d9b5180d98c4ffe16aa7fac84542cc3c4ff0d056 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:22 +0530 Subject: [PATCH 279/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 9c615ea56a2ce2175dd8880cb28f01b9c704abff Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:24 +0530 Subject: [PATCH 280/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 8724f0185a3cb8afaf2b2da03b84169f2fc8c735 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:25 +0530 Subject: [PATCH 281/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index df85c1a2..512021e5 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From e58affbd3773bf793fd2bceadcfa4d8807d7e4ed Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:27 +0530 Subject: [PATCH 282/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 30746ac1..9ffab8a2 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From a687ddf01a3e41079cd3dc62ac59e33dab59efe9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:28 +0530 Subject: [PATCH 283/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From bca2d5625f7028331a28947ba36d8f9d695969f5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:29 +0530 Subject: [PATCH 284/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 8ac6245333822e933e428ce4fbd501314ef145d1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:31 +0530 Subject: [PATCH 285/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 8847d2d2711cf28305d062a3ed5e0d2db1a0eacf Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:32 +0530 Subject: [PATCH 286/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index abd0321e..b2a14308 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -61,6 +61,7 @@ Elenco dei profili creati I profili sono una raccolta di impostazioni che possono essere applicate con un click, o applicali con app come Tasker utilizzando le funzionalità di automazione che forniscono. Backup dei valori KCAL correnti ogni volta prima che Night Light è abilitata + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 6543e42f0b45945b0b8ce570c9ef74f079180726 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:35 +0530 Subject: [PATCH 287/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From aa1531aa520b8ea51d6b8959d46de2cbf500f42f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:37 +0530 Subject: [PATCH 288/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From d8a1be21bfe9c8358b07b82290df84c28c875656 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:38 +0530 Subject: [PATCH 289/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 2372f1ec..12dc638b 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From fc9d78a2828cf37603a2f7c05e420f9407cd80cb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:40 +0530 Subject: [PATCH 290/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From ddc3de853baaaa9f17ffa4f3519b3df859fff8ac Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:41 +0530 Subject: [PATCH 291/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 0a3dae7494ba424e78c80df2b628e57611c0a423 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:42 +0530 Subject: [PATCH 292/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From f6bb86fd8df95067dd7482e39635a2e3800c8a42 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:44 +0530 Subject: [PATCH 293/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 23f3f860c28c7dffcaa4af283fc13ec75c6b8864 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:45 +0530 Subject: [PATCH 294/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 0a00327a..28852d1b 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From f7791221f101befdce06c0ef3216599d099902f8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:46 +0530 Subject: [PATCH 295/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 86f35605e6132e663fc308e3fddff3c5e0cae0ae Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:47 +0530 Subject: [PATCH 296/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 32591dd6..2854bf97 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From e77ee94ef7945fe686445d56ec4489c9b52557f7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:49 +0530 Subject: [PATCH 297/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 492e7049..e8f6a5ad 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 97964c4271a689f9522683221baa704275713d3a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:50 +0530 Subject: [PATCH 298/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 7e7fb0177f323b53a14b08ce87b74b18c678e332 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:52 +0530 Subject: [PATCH 299/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 1790cec6..5bcaef14 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -61,6 +61,7 @@ Lista stworzonych profili Profile to kolekcja ustawień które możesz ustawić za pomocą jednego kliknięcie, albo pozwlić by aplikacji taka jak Tasker używajac swoich automatycznch profili zrobiła to za ciebie. Kopii zapasowej bieżącej wartości KCAL każdorazowo przed aktywacja Night Light jest włączona + F.A.Q Links Pulpit nawigacyjny Turns off in %1$d hour(s) From f74760d8c8818cd09bbb6dd520569eb4e53255e1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:53 +0530 Subject: [PATCH 300/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 01eb6dfc..2e904d9f 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From b2e86cf6261a18beb39c120ed07213972195a374 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 24 May 2020 16:22:54 +0530 Subject: [PATCH 301/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 1 + 1 file changed, 1 insertion(+) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index 16737939..db830d93 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -61,6 +61,7 @@ List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. Backup current KCAL values every time before Night Light is enabled + F.A.Q Links Dashboard Turns off in %1$d hour(s) From 07dbebc32905415c882132403652c1e776613bfb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:06 +0530 Subject: [PATCH 302/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 85624bcad8e12de8bfd55cea4afb18c31bfdfacd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:07 +0530 Subject: [PATCH 303/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index b2a14308..355ada3b 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From d8da2db4cd16b60fae4fe965d2ead0349dda01c9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:09 +0530 Subject: [PATCH 304/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From eeae1e0423dda9508cf8f3e84cfa99159495cd88 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:10 +0530 Subject: [PATCH 305/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 12dc638b..54ea26ef 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 493617c135be800368033c5afcddf77f40cb9842 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:12 +0530 Subject: [PATCH 306/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From e5bc442e1edb34658c386d30a356063636e9c152 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:13 +0530 Subject: [PATCH 307/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 10e368d96abee044f2f24f3a2151bddae74a1bb7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:15 +0530 Subject: [PATCH 308/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 1b53aff69ad06c00a546a5029e4f1d8b190e1711 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:16 +0530 Subject: [PATCH 309/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From cfb6ce17ab44caf5bb06e91cde2884b425478ea5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:17 +0530 Subject: [PATCH 310/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 443a6404e7c55b811574be6de3ac64bc7df34237 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:19 +0530 Subject: [PATCH 311/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 4886296ce1b06b16089aec71ea623c4e8d0c36ff Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:20 +0530 Subject: [PATCH 312/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 9ffab8a2..cc4a7604 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 2aaed7377af11c835401a880512a803c648d89b2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:22 +0530 Subject: [PATCH 313/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 512021e5..a64e80bb 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 5f073bd6b6b12ee1c1aa5dbb631ecf21e660c7ff Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:23 +0530 Subject: [PATCH 314/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From cdc674d6641203253fd4b361f47b50b36b605836 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:24 +0530 Subject: [PATCH 315/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 5bcaef14..310e8e01 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 273d82b67ff7dc51c74752fa62a139eb4c48e235 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:26 +0530 Subject: [PATCH 316/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From f6348d649616dbee3e43a6135434d6ea46b3abaa Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:28 +0530 Subject: [PATCH 317/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index e8f6a5ad..d34b49de 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 89ac7b8b36257e79f7642741ea513130f53cc96f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:29 +0530 Subject: [PATCH 318/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 2854bf97..b5d05d2e 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 18547e3055ef51c3efd1067a83d67ff8f143d2a6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:31 +0530 Subject: [PATCH 319/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 566d0ce4de6c27d7a9c449d05395b822349d2399 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:32 +0530 Subject: [PATCH 320/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 28852d1b..b2181bd2 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From d876c7546516370cb8c74585bd6cfaf026095989 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:34 +0530 Subject: [PATCH 321/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From cec0a08aa1a836d710c680d0f3cc62d919b73daa Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:35 +0530 Subject: [PATCH 322/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From c16100ca64b90407c535a842f0edfd0eb7caad8c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:37 +0530 Subject: [PATCH 323/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 2e904d9f..878e36ac 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 2b0eac232ee052ec2c07484018a043e0e0aea963 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 25 May 2020 13:43:38 +0530 Subject: [PATCH 324/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index db830d93..35bfb9f3 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -104,4 +104,11 @@ Info Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States + Bed time + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Experimental + Saturation path + Pro version + Get Pro version + The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? From 2d55072abd680e19ee4f51440f66124227e2fcb5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 28 Jun 2020 18:51:55 +0530 Subject: [PATCH 325/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 40 +++++++++++++------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index b5d05d2e..c19eeb43 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -1,7 +1,7 @@ - Master switch is off. Turn it on to enable all the features of the app. To turn it on, tap the power button above. - Master switch is on. All the features of the app are enabled. Turn it off to disable all the features of the app. To turn it off, tap the power button above. + Ana şalter kapalı. Uygulamanın tüm özelliklerini etkinleştirmek için açın. Açmak için yukarıdaki güç düğmesine dokunun. + Ana şalter açık. Uygulamanın tüm özellikleri etkindir. Uygulamanın tüm özelliklerini devre dışı bırakmak için kapatın. Kapatmak için yukarıdaki güç düğmesine dokunun. Üst üye erişimi yok Night Light\'ın çalışması için üst üye erişimi gerekiyor. Uyumsuz @@ -10,10 +10,10 @@ Belirlenen zamanlarda Night Light\'ı otomatik olarak etkinleştir. Bu zaman aralığı dışında Night Light otomatik olarak devredışı bırakılacaktır. Başlama zamanı Bitiş zamanı - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Karanlık zamanları etkinleştir + Bu, otomatik zaman çizelgesinin bir parçası olarak minimum ve maksimum yoğunlukların kullanılmasını sağlar. Etkinleştirilirse, minimum yoğunluk başlangıç ​​zamanından karanlık saat başlangıç ​​zamanına kadar uygulanır ve maksimum yoğunluk daha sonra program sona erene kadar kullanılacaktır. + Karanlık sürelerin başlama zamanı + Zaman, program başlangıç ​​zamanı ve bitiş zamanı arasında olmalıdır Hakkında Night Lamb, karanlıkta telefonunuzu kullandığınızda gözleriniz için daha uygun olan mavi ışığın yoğunluğunu ayarlamak amacıyla Qualcomm cihazlarının yeni üretimi için ekran sürücüsü ayarlama özelliği olan KCAL\'ı kullanır ve uykuya dalmanıza yardım eder. Sürücü seviyesinde değişiklikler yaptığı ve yazılım bindirmesi kullanmadığı için batarya dostudur ve değişim ekranın her yerinde görülebilir. Aç/kapa @@ -22,20 +22,20 @@ Bilinen son konumunuz alınamıyor. Mevcut KCAL değerlerini koru Katkıda Bulunanlar - Color Temperature - Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. - Delay - Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. - Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. - Red - Green - Blue - Configure - Profiles - Create profile + Renk sıcaklığı + Ayarlanacak renk sıcaklığının değeri. Düşük sıcaklıklar, az ışıkta kullanmak için daha uygundur. + Gecikme + Gece Işığı ayarlarının önyüklenmeden sonra geri yükleneceği ve uygulanacağı gecikmeyi ayarlayın. Gece Işığı ayarları %s gecikmeden sonra uygulanacak. + Görünüşe göre Gece Işığı ayarları geri yüklendi, ancak en son önyüklemeden sonra uygulanamadı. Ayarların önyüklemeden sonra başarıyla geri yüklenebilmesi ve uygulanabilmesi için bu gecikmeyi artırmayı düşünün. + KCAL Yedekleme + KCAL Yedekleme Ayarları + Eski KCAL ayarlarınızı burada yapılandırabilirsiniz. Bu ayarlar gece lambası söndüğünde uygulanır. + Kırmızı + Yeşil + Mavi + Yapılandırma + Profiller + Profil Oluştur Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, Edit profile Edit an existing profile From 0674e34c157f8907f451d68d88d1d9cf933e6724 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 28 Jun 2020 19:01:45 +0530 Subject: [PATCH 326/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 60 +++++++++++++------------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index c19eeb43..e9a3bc8c 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -36,36 +36,36 @@ Yapılandırma Profiller Profil Oluştur - Create a profile (collection of settings), which you can then apply it easily with one click, or use apps like Tasker apply it for you, - Edit profile - Edit an existing profile - Setting mode - Night Light switch - Setting unavailable - Profile name - A profile with same name already exists, please try another name. - No profiles created - Tap the + button to start setting up a profile - Apply - Edit - Delete - Are you sure want to delete the %1$s profile? - Confirm - Are you sure you want use %1$s profile as a part of your Tasker plugin routine? - Night Light disabled - To use tasker plugin, you must enable Master Switch first. - Master controls - Color controls - Set on boot - Automation - List of profiles created - Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled - F.A.Q - Links - Dashboard - Turns off in %1$d hour(s) - Turns on in %1$d hour(s) + Daha sonra tek bir tıklamayla kolayca uygulayabileceğiniz bir profil (ayarlar koleksiyonu) oluşturun veya Tasker\'ın sizin için uyguladığı uygulamaları kullanın, + Profili düzenle + Mevcut bir profili düzenleme + Ayarlama modu + Gece Işığı düğmesi + Ayar mevcut değil + Profil adı + Aynı ada sahip bir profil zaten var, lütfen başka bir ad deneyin. + Hiç profil oluşturulmadı + Profil oluşturmaya başlamak için + düğmesine basın + Uygula + Düzenle + Sil + %1$s profilini silmek istediğinizden emin misiniz? + Onayla + %1$s profilini Tasker eklenti rutininizin bir parçası olarak kullanmak istediğinizden emin misiniz? + Gece Işığı devre dışı + Tasker eklentisini kullanmak için, önce Ana Anahtar\'ı etkinleştirmeniz gerekir. + Ana kontroller + Renk kontrolleri + Önyüklemede ayarla + Otomatikleştir + Oluşturulan profillerin listesi + Profiller, tek bir tıklamayla uygulanabilen ayarlar topluluğudur veya Tasker gibi uygulamaların sağladıkları otomasyon yeteneklerini kullanarak sizin için uygulamasını sağlar. + Gece Işığı etkinleştirilmeden önce geçerli KCAL değerlerini yedekleyin + S.S.S + Linkler + Gösterge Paneli + %1$d saat içinde kapanıyor + %1$d saat içinde açılır Options Manual Mode Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. From 9c56954bb72d8d931e4920c3728ec88b2bedddb5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 28 Jun 2020 19:11:51 +0530 Subject: [PATCH 327/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index e9a3bc8c..bc8ff0de 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -66,18 +66,18 @@ Gösterge Paneli %1$d saat içinde kapanıyor %1$d saat içinde açılır - Options - Manual Mode - Manual KCAL color controls gives you full freedom on how you would like to tune display colors so that your needs are met. - Intensity - Type of color intensity to be applied. There are 2 intensity types available: Maximum and Minimum. You may want to use the maximum intensity in dark environments, and the minimum intensity in lighted environments at evening. Tap the bulb in dashboard to switch between intensity types when Night Light is on. - Maximum + Seçenekler + Manüel Mod + Manuel KCAL renk kontrolleri, ekran renklerini ihtiyaçlarınızı karşılayacak şekilde nasıl ayarlamak istediğiniz konusunda size tam bir özgürlük sunar. + Yoğunluk + Uygulanacak renk yoğunluğu türü. Mevcut 2 yoğunluk tipi vardır: Maksimum ve Minimum. Karanlık ortamlarda maksimum yoğunluğu ve akşamları ışıklı ortamlarda minimum yoğunluğu kullanmak isteyebilirsiniz. Gece Işığı açıkken yoğunluk türleri arasında geçiş yapmak için gösterge tablosundaki ampule dokunun. + Maksimum Minimum - Toggle intensity - KCAL Driver - KCAL Driver Information - Implementation name - Switch path + Yoğunluğu aç / kapat + KCAL Sürücüsü + KCAL Sürücü Bilgileri + Uygulama adı + Anahtar yolu RGB file path(s) Format specification Version From 0d4a4fe6eb753b658773610e7d4b8ba837ac02bd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 28 Jun 2020 19:21:39 +0530 Subject: [PATCH 328/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 66 +++++++++++++------------- 1 file changed, 33 insertions(+), 33 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index bc8ff0de..4cd66dfe 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -78,37 +78,37 @@ KCAL Sürücü Bilgileri Uygulama adı Anahtar yolu - RGB file path(s) - Format specification - Version - Enable light theme - Enables light theme with light background and slightly different looks. - Show support - Rate this app - Donate - Translate this app - Enabled - Night Light settings will be restored on boot. - Night Light settings will not be restored on boot. - On - Off - Properties - Following properties will be applied when this profile is applied. If night light is off, color setting will not be applied. - Actions - Icon shape - Square - Circle - Rounded square - Teardrop - ColorActivity - Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. - States - Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. - Experimental - Saturation path - Pro version - Get Pro version - The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + RGB dosya yolları + Biçim belirtimi + Sürüm + Beyaz temayı etkinleştir + Açık renkli ve biraz farklı görünümlerle beyaz temayı etkinleştirir. + Desteğini göster + Bu uygulamayı oyla + Bağış yap + Bu uygulamayı çevir + Etkin + Gece Işığı ayarları önyükleme sırasında geri yüklenecektir. + Gece Işığı ayarları önyükleme sırasında geri yüklenmeyecek. + Açık + Kapalı + Özellikler + Bu profil uygulandığında aşağıdaki özellikler uygulanacaktır. Gece ışığı kapalıysa, renk ayarı uygulanmaz. + Hareketler + Simge şekli + Kare + Daire + Yuvarlatılmış kare + Gözyaşı + RenkEtkinliği + Bilgi + Gece lambasını açıp kapatmak için yukarıdaki ampule basın. Yoğunlukları değiştirmek için yukarıdaki ampule uzun basın. + Devletler + Uyku vakti + Uyku vakti modu ekranınızın gri tonlamasını yapar ve bu da sizi daha hızlı uykuya dalmanzı sağlar. Bu, diğer Gece Işığı ayarlarına bağlı olmayan ve buna müdahale etmeyen bağımsız bir moddur. Normal Gece Işığını kullanmak için bu modu devre dışı bırakmanız gerekir. bu modu etkinleştirmek veya devre dışı bırakmak için yatak simgesine dokunun. + Deneysel + Doygunluk yolu + Pro sürümü + Pro versiyonu kap + Gece Işığının (Night Light\'ın) pro sürümü daha iyi kullanıcı arayüzüne ve harika yeni özelliklere ve işlevlere sahiptir. Profesyonel sürümü alarak, proje için takdir ve destek de gösterirsiniz ve beni proje üzerinde çalışmaya devam etmeye motive edersiniz. Pro sürümünü şimdi almak ister misiniz? From ad7e72f3b1b2af622c6cfeee3acbb03d9212e550 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sun, 28 Jun 2020 19:32:00 +0530 Subject: [PATCH 329/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 4cd66dfe..4c5f328b 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -12,7 +12,7 @@ Bitiş zamanı Karanlık zamanları etkinleştir Bu, otomatik zaman çizelgesinin bir parçası olarak minimum ve maksimum yoğunlukların kullanılmasını sağlar. Etkinleştirilirse, minimum yoğunluk başlangıç ​​zamanından karanlık saat başlangıç ​​zamanına kadar uygulanır ve maksimum yoğunluk daha sonra program sona erene kadar kullanılacaktır. - Karanlık sürelerin başlama zamanı + Karanlık zamanların başlama zamanı Zaman, program başlangıç ​​zamanı ve bitiş zamanı arasında olmalıdır Hakkında Night Lamb, karanlıkta telefonunuzu kullandığınızda gözleriniz için daha uygun olan mavi ışığın yoğunluğunu ayarlamak amacıyla Qualcomm cihazlarının yeni üretimi için ekran sürücüsü ayarlama özelliği olan KCAL\'ı kullanır ve uykuya dalmanıza yardım eder. Sürücü seviyesinde değişiklikler yaptığı ve yazılım bindirmesi kullanmadığı için batarya dostudur ve değişim ekranın her yerinde görülebilir. From fbc1a218b96d8a026033adcf56d2d670030941bc Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:10 +0530 Subject: [PATCH 330/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From c192aa9aed7f42da5eeb04e664c60075b66dcb61 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:11 +0530 Subject: [PATCH 331/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 43b79ce4b3b995da57533bcafc61ba57cecf1bc3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:13 +0530 Subject: [PATCH 332/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 095020ea019728d30cdbef115c25d304c6f0845a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:14 +0530 Subject: [PATCH 333/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 6fee7da20cda75e1915fdc0321dc0c55e6839b33 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:16 +0530 Subject: [PATCH 334/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From db09c2f58b8b87c5207905bb0c9865d360946375 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:17 +0530 Subject: [PATCH 335/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index b2181bd2..e97a2bed 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -7,20 +7,28 @@ Tidak kompatibel Kernel anda tidak mendukung KCAL. KCAL adalah sebuah display driver tuning fitur untuk perangkat Qualcomm. KCAL dukungan yang dibutuhkan untuk Cahaya Malam untuk bekerja. Saklar otomatis - Secara otomatis mengaktifkan Night Light antara waktu yang ditentukan. Malam Cahaya akan otomatis dinonaktifkan di luar rentang waktu ini. + Automatically enable Night Light between the specified time and disable outside the specified time. Waktu di mulai Waktu berakhir - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite Tentang Cahaya malam menggunakan KCAL, yang merupakan display driver tuning fitur untuk generasi baru perangkat Qualcomm, untuk mengatur intensitas cahaya biru, yang membuatnya lebih nyaman untuk mata anda ketika anda menggunakan ponsel anda dalam gelap dan membantu anda tertidur. Sejak itu membuat perubahan di tingkat driver, dan tidak menggunakan software apapun overlay, ini adalah baterai ramah dan perubahan dapat dilihat di mana-mana pada layar. Beralih hidup/mati  (hari Berikutnya) Gunakan timing matahari terbit/matahari terbenam Tidak bisa mendapatkan lokasi terakhir yang diketahui. - Melestarikan saat ini KCAL nilai-nilai + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Kontributor Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From eb2e702ba59162150044d2315d3bf3ab4e5810e8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:19 +0530 Subject: [PATCH 336/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From ea271177be3084ec48e30d295bb3013df0a4888b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:21 +0530 Subject: [PATCH 337/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 4c5f328b..4dc127aa 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -7,20 +7,28 @@ Uyumsuz Çekirdeğiniz KCAL\'ı desteklemiyor. KCAL, Qualcomm aygıtları için hazırlanan bir ekran sürücüsü ayarlama özelliğidir. Night Light\'ın çalışması için KCAL desteği gereklidir. Otomatik geçiş - Belirlenen zamanlarda Night Light\'ı otomatik olarak etkinleştir. Bu zaman aralığı dışında Night Light otomatik olarak devredışı bırakılacaktır. + Automatically enable Night Light between the specified time and disable outside the specified time. Başlama zamanı Bitiş zamanı - Karanlık zamanları etkinleştir - Bu, otomatik zaman çizelgesinin bir parçası olarak minimum ve maksimum yoğunlukların kullanılmasını sağlar. Etkinleştirilirse, minimum yoğunluk başlangıç ​​zamanından karanlık saat başlangıç ​​zamanına kadar uygulanır ve maksimum yoğunluk daha sonra program sona erene kadar kullanılacaktır. - Karanlık zamanların başlama zamanı - Zaman, program başlangıç ​​zamanı ve bitiş zamanı arasında olmalıdır + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite Hakkında Night Lamb, karanlıkta telefonunuzu kullandığınızda gözleriniz için daha uygun olan mavi ışığın yoğunluğunu ayarlamak amacıyla Qualcomm cihazlarının yeni üretimi için ekran sürücüsü ayarlama özelliği olan KCAL\'ı kullanır ve uykuya dalmanıza yardım eder. Sürücü seviyesinde değişiklikler yaptığı ve yazılım bindirmesi kullanmadığı için batarya dostudur ve değişim ekranın her yerinde görülebilir. Aç/kapa  (Sonraki gün) Günbatımı/gündoğumu zamanlamalarını kullan Bilinen son konumunuz alınamıyor. - Mevcut KCAL değerlerini koru + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Katkıda Bulunanlar Renk sıcaklığı Ayarlanacak renk sıcaklığının değeri. Düşük sıcaklıklar, az ışıkta kullanmak için daha uygundur. @@ -28,8 +36,8 @@ Gece Işığı ayarlarının önyüklenmeden sonra geri yükleneceği ve uygulanacağı gecikmeyi ayarlayın. Gece Işığı ayarları %s gecikmeden sonra uygulanacak. Görünüşe göre Gece Işığı ayarları geri yüklendi, ancak en son önyüklemeden sonra uygulanamadı. Ayarların önyüklemeden sonra başarıyla geri yüklenebilmesi ve uygulanabilmesi için bu gecikmeyi artırmayı düşünün. KCAL Yedekleme - KCAL Yedekleme Ayarları - Eski KCAL ayarlarınızı burada yapılandırabilirsiniz. Bu ayarlar gece lambası söndüğünde uygulanır. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Kırmızı Yeşil Mavi @@ -60,7 +68,8 @@ Otomatikleştir Oluşturulan profillerin listesi Profiller, tek bir tıklamayla uygulanabilen ayarlar topluluğudur veya Tasker gibi uygulamaların sağladıkları otomasyon yeteneklerini kullanarak sizin için uygulamasını sağlar. - Gece Işığı etkinleştirilmeden önce geçerli KCAL değerlerini yedekleyin + Backup every time + Backup current KCAL values every time before Night Light is enabled. S.S.S Linkler Gösterge Paneli @@ -84,6 +93,7 @@ Beyaz temayı etkinleştir Açık renkli ve biraz farklı görünümlerle beyaz temayı etkinleştirir. Desteğini göster + Your appreciation and support keeps me motivated to keep on working on this project. Bu uygulamayı oyla Bağış yap Bu uygulamayı çevir @@ -111,4 +121,12 @@ Pro sürümü Pro versiyonu kap Gece Işığının (Night Light\'ın) pro sürümü daha iyi kullanıcı arayüzüne ve harika yeni özelliklere ve işlevlere sahiptir. Profesyonel sürümü alarak, proje için takdir ve destek de gösterirsiniz ve beni proje üzerinde çalışmaya devam etmeye motive edersiniz. Pro sürümünü şimdi almak ister misiniz? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 3e09780ca6046d5467285cccd777053d2e1b2ec5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:23 +0530 Subject: [PATCH 338/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index d34b49de..c32f275e 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -7,20 +7,28 @@ Несовместимый Ваше ядро не поддерживает KCAL. KCAL - это функция настройки драйвера дисплея для устройств Qualcomm. Поддержка KCAL необходима для работы ночного света. Автоматическое вкл. Night Light - Автоматическое включение ночного света между указанным диапазоном временем. Ночной свет будет автоматически отключен за пределами этого диапазона времени. + Automatically enable Night Light between the specified time and disable outside the specified time. Время начала Время окончания - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite О приложении Ночной свет использует KCAL, который является функцией настройки драйвера дисплея для нового поколения Qualcomm устройств. Ночной свет регулирует интенсивность синего света, что делает его более удобным для ваших глаз, когда вы используете телефон в тёмное время суток и это помогает вам заснуть. Поскольку данное приложение вносит изменения на уровне драйвера и не использует никакие наложения программного обеспечения, то батарея более дружественная, и изменение можно увидеть повсюду на дисплее. Вкл./Откл.  (Следующий день) От заката до рассвета Невозможно получить ваше последнее известное местоположение. - Оберегать исходные параметры KCAL + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Авторы Цветовая температура Здесь вы устанавливаете значение цветовой температуры. Более низкие температуры лучше подходят для просмотра в недостаточной освещенности. @@ -28,8 +36,8 @@ Установите задержку, после которой параметры ночного света будут восстановлены и применены после загрузки. Параметры ночного света будут применены после %s сек. Похоже, параметры ночного света были восстановлены, но они не применились после последней загрузки. Рассмотрите возможность увеличения задержки, чтобы параметры можно было успешно восстановить и применить после загрузки. KCAL Backup - Настройки резервного копирования KCAL - Здесь вы можете настроить свои исходные параметры KCAL. Эти параметры будут применены при выключении Night Light. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Красный Зеленый Синий @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 98b545f60a7360693c94ef0646a4a5a4a8d5e84b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:24 +0530 Subject: [PATCH 339/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 638cad977103b6f8b1e3d5f14852ad0c8cc7ba97 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:26 +0530 Subject: [PATCH 340/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 310e8e01..e4a6bf4c 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -7,20 +7,28 @@ Niekompatybilny Twój kernel nie obsługuje KCAL. KCAL to podrasowany sterownik ekranowy dla telefonów z procesorem Qualcomm. By aplikacja działała potrzebne jest wsparcie dla KCAL Automatyczny przełacznik - Automatycznie uruchamiaj Night Light pomiędzy ustalonymi godzinami. Night Light będzie automatycznie wyłączany za tymi zakresami godzin. + Automatically enable Night Light between the specified time and disable outside the specified time. Godzina włączenia Godzina wyłączenia - Włącz ciemne godziny - Umożliwia to stosowanie minimalnych i maksymalnych natężeń w ramach zautomatyzowanego harmonogramu. Jeśli włączone, zostaną zastosowane minimalne natężenie od godziny rozpoczęcia do godziny rozpoczęcia czasu ciemnego, a maksymalna intensywność będzie używany następnie do czasu zakończenia harmonogramu. - Godzina rozpoczęcia ciemnych godzin - Czas musi być pomiędzy harmonogramem czasu rozpoczęcia i czasu zakończenia + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite O aplikacji Night light używa KCAL, który jest podrasowanym sterownikiem ekranowynm dla urządzeń z procesorem od Qualcomm. Pozwala on na dostosowanie intensywności zielonego i niebieskiego światła co czyni ekran bardziej komfortowy do czytania w ciemnych pomieszczeniach i pozwala także łatwiej zasnąć. Zmiany które wprowadza są w warstwie sterownika i nie używa on żadnego oprogramowania nadpisującego ekran. Także jest on przyjazny dla baterii i zmiany możemy zobaczyć w każdej aplikacji. Włącz/Wyłącz  (Następny dzień) Użyj ustawień czasu zachodu słońca / wschodu słońca Nie można uzyskać ostatnio znanej lokalizacji - Zachowaj aktualne wartości KCAL + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Współtwórcy Temperatura kolorów Wartośc temperatury kolorów. Im niższa temperatura tym konfortowsze jest patrzenie na ekran przy słabym świetle. @@ -28,8 +36,8 @@ Ustaw opóźnienie po którym Night Light przywróci ustawienia i wdroży je po uruchomieniu. Ustawienia Night Light będą ustawione z %s opóźnieniem. Wygląda na to że ustawienia Night Light zostały przywrócone ale nie zostały wdrożone. Zalecane jest wydłużenie czasu opóżnienia po jakim ustawienia zostaną wdrożone. Kopia zapasowa KCAL - Ustawienia zapasowe KCAL - Tutaj możesz skonfigurować stare ustawienia KCAL. Te ustawienia będą używane gdy Night Light nie będzie używany. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Czerwony Zielony Niebieski @@ -60,7 +68,8 @@ Automatyzacja Lista stworzonych profili Profile to kolekcja ustawień które możesz ustawić za pomocą jednego kliknięcie, albo pozwlić by aplikacji taka jak Tasker używajac swoich automatycznch profili zrobiła to za ciebie. - Kopii zapasowej bieżącej wartości KCAL każdorazowo przed aktywacja Night Light jest włączona + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Pulpit nawigacyjny @@ -84,6 +93,7 @@ Włącz jasny motyw Włącz jasny motyw z jasnym tłem i nieco innym wyglądem. Pokaż wsparcie + Your appreciation and support keeps me motivated to keep on working on this project. Oceń tę aplikację Wesprzyj Przetłumacz aplikację @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From b65bc14ceebab885a23a5df09337a20238bb95d2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:27 +0530 Subject: [PATCH 341/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 5bdeca85503dd5ab740ee2f4543120addc820996 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:29 +0530 Subject: [PATCH 342/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 54ea26ef..503411b4 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -7,20 +7,28 @@ Incompatible Su núcleo no soporta KCAL. KCAL es una función de ajuste que controla la pantalla para equipos Qualcomm. Se necesita que se soporte KCAL para que Night Light funcione. Interuptor automático - Activar automáticamente Night Light entre el tiempo especificado. Night Light será desactivado automáticamente fuera de este rango de tiempo. + Automatically enable Night Light between the specified time and disable outside the specified time. Hora de inicio Hora de fin - Activar horas oscuras - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite Sobre Night Light usa KCAL, que es una función de ajuste que controla la pantalla para la nueva generación de equipos Qualcomm, para ajustar la intensidad de la luz azul, permitiendo que sea más cómodo para tus ojos cuando estés usando tu telefono en la oscuridad y te ayudaría a dormirte. Ya que hace cambios a nivel del driver, y no usa superposiciones de software, es amigable con la batería y el cambio puede ser visto en toda la pantalla. Alternado encendido/apagado  (siguiente día) Usa tiempos de amanecer/atardecer Incapaz de localizar tu última ubicación conocida. - Mantener los valores actuales de KCAL + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contribuyentes Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From a8a0965d52e7cfac4c8c1b7e3b45c99df2529e7e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:31 +0530 Subject: [PATCH 343/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 27f7c676336bbe3ecf53a049fe97ce551a860888 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:32 +0530 Subject: [PATCH 344/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 813f4a1e1a2ecec5519f840e330de9367d1e1434 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:33 +0530 Subject: [PATCH 345/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 355ada3b..1a5c6b1a 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -7,20 +7,28 @@ Incompatibile Il tuo kernel non supporta KCAL. KCAL driver per il controllo dei colori del display per i dispositivi Qualcomm. Il supporto KCAL è necessario per far funzionare Night Light. Interruttore automatico - Attiva automaticamente Night Light nell\'intervallo specificato. Night Light verrà disabilitato automaticamente al di fuori di questo intervallo di tempo. + Automatically enable Night Light between the specified time and disable outside the specified time. Orario di inizio Ora di fine - Abilita le ore scure - Ciò consente l\'uso di intensità minime e massime come parte della pianificazione automatica. Se abilitato, l\'intensità minima verrà applicata dall\'ora di inizio sino alle ore scure e la massima intensità verrà applicata fino al termine del programma. - Ora di inizio delle ore scure - L\'orario deve essere compreso tra orario di inizio e ora di fine + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite Info su Night Light utilizza KCAL, che è una funzione di controllo dei driver per i dispositivi di nuova generazione Qualcomm, per regolare l\'intensità della luce blu, che rende più confortevole gli occhi quando usi il telefono al buio e ti aiuta ad addormentarti. Dal momento che agisce a livello del driver e non utilizza sovrapposizioni software, non influenza la durata della batteria e il cambiamento può essere visto ovunque sul display. Attiva/Disattiva  (giorno successivo) Usa orari dei tramonto/alba Impossibile ottenere la posizione. - Mantieni i valori KCAL correnti + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Hanno contribuito Temperatura colore Valore della temperatura colore da impostare. Temperature più basse sono adatte alla scarsa illuminazione. @@ -28,8 +36,8 @@ Imposta il ritardo dopo il quale le impostazioni di Night Light saranno ripristinate e applicate dopo l\'avvio. Le impostazioni di Night Light saranno applicate dopo %s secondi di ritardo. Sembra che le impostazioni di Night Light siano state ripristinate, ma non è stato possibile applicarle dopo l\'ultimo riavvio. Prova ad aumentare questo ritardo in modo che le impostazioni possano essere ripristinate e applicate dopo l\'avvio. Backup KCAL - Impostazioni dei backup KCAL - È possibile configurare le vecchie impostazioni di KCAL qui. Queste impostazioni verranno applicate quando Night Light è spenta. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Rosso Verde Blu @@ -60,7 +68,8 @@ Automazione Elenco dei profili creati I profili sono una raccolta di impostazioni che possono essere applicate con un click, o applicali con app come Tasker utilizzando le funzionalità di automazione che forniscono. - Backup dei valori KCAL correnti ogni volta prima che Night Light è abilitata + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Attiva tema chiaro Attiva il tema chiaro con sfondo chiaro e un aspetto leggermente diverso. Supporta il progetto + Your appreciation and support keeps me motivated to keep on working on this project. Vota questa app Dona Traduci l\'app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 3ec71ce9158c3190b6dcf69af678658ee86187dd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:35 +0530 Subject: [PATCH 346/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From b273ea0fed601cc2da2fc0a652aac86765a22171 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:37 +0530 Subject: [PATCH 347/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 1cc9596be8117bd41333a612743b674eaadd5ff7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:38 +0530 Subject: [PATCH 348/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From e5197189ef48e404280bb5ade85666ea0aa76ec3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:40 +0530 Subject: [PATCH 349/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index cc4a7604..20e93b04 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -7,20 +7,28 @@ Ασύμβατο Ο kernel σας δεν υποστηρίζει KCAL. Το KCAL είναι ένα χαρακτηριστικό συντονισμού των οθονών για συσκευές Qualcomm. Η υποστήριξη KCAL είναι απαραίτητη για να λειτουργήσει το Night Light. Αυτόματος διακόπτης - Αυτόματη ενεργοποίηση του Night Light στο ορισμένο χρονικό διάστημα. Το Night Light θα απενεργοποιηθεί αυτόματα εκτός αυτού του διαστήματος. + Automatically enable Night Light between the specified time and disable outside the specified time. Ώρα έναρξης Ώρα λήξης - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite Σχετικά Το Night Light χρησιμοποιεί KCAL, το οποίο είναι ένα χαρακτηριστικό συντονισμού των οθονών για συσκευές Qualcomm νέας γενιάς, για την ρύθμιση έντασης του μπλε φωτός, που καθιστά πιο ξεκούραστη για τα μάτια την χρήση του κινητού στο σκοτάδι και βοηθά στον ύπνο. Εφόσον πραγματοποιεί αλλαγές σε επίπεδο driver και δεν χρησιμοποιεί επικαλύψεις λογισμικού, δεν έχει αντίκτυπο στην μπαταρία και η αλλαγή είναι ορατή σε όλη την οθόνη. Ενεργοποίηση/Απενεργοποίηση  (Επόμενη ημέρα) Χρήση ωρών Ανατολής/Δύσης Ηλίου Δεν ήταν δυνατή η λήψη της τελευταίας σας γνωστής τοποθεσίας. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 160712ee54a1f97d41efc558387e5336d7381b7b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:42 +0530 Subject: [PATCH 350/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index a64e80bb..d22f4477 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -7,20 +7,28 @@ Inkompatibel Dein Kernel unterstützt KCAL nicht. KCAL ist ein Display-Treiber-Tuning Feature für Qualcomm Geräte. KCAL ist benötigt, damit Night Light funktioniert. Schaltautomatik - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 17d85ad8770aef7ef1d8b573a71607f14f317b57 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:44 +0530 Subject: [PATCH 351/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 36 +++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 878e36ac..9afe86c7 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -7,20 +7,28 @@ Incompatible Your kernel does not support KCAL. KCAL is a display driver tuning feature for Qualcomm devices. KCAL support is needed for Night Light to work. Automatic switch - Automatically enable Night Light between the specified time. Night Light will be automatically disabled outside this time range. + Automatically enable Night Light between the specified time and disable outside the specified time. Start time End time - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite About Night Light uses KCAL, which is a display driver tuning feature for new generation Qualcomm devices, to adjust the intensity of blue light, which makes it more comfortable for your eyes when you are using your phone in the dark and helps you fall asleep. Since it makes changes at driver level, and it does not use any software overlays, it is battery friendly and the change can be seen everywhere on the display. Toggle on/off  (Next day) Use sunset/sunrise timings Unable to get your last known location. - Preserve current KCAL values + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 848baeada8a220eea41fcc2b9f11a86cfb5c81a1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Wed, 30 Sep 2020 22:05:45 +0530 Subject: [PATCH 352/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 36 ++++++++++++++++++------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index 35bfb9f3..6e559650 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -7,20 +7,28 @@ Hindi kaayon Ang iyong kernel ay hindi sumusuporta sa KCAL. Ang KCAL ay isang display na tampok ng tuning ng driver para sa mga aparatong Qualcomm. KCAL support ay kailangan para sa Night Light upang gumana. Awtomatikong switch - Awtomatikong paganahin ang Night Light sa pagitan ng tinukoy na oras. Ay awtomatikong hindi pinagana ang Night Light sa labas ng saklaw ng oras na ito. + Automatically enable Night Light between the specified time and disable outside the specified time. Oras ng simula Oras ng pagtatapos - Enable dark hours - This enables the use of minimum and maximum intensities as a part of automated time schedule. If enabled, the minimum intensity will be applied from start time to dark hours start time, and maximum intensity will be used then on until the schedule ends. - Dark hours start time - Time must be in between schedule start time and end time + Enable fading + Night light intensity will fade from minimum intensity to maximum intensity. + Fade stop time + Time must be in between schedule start time and end time. + Fade poll rate + 5 minutes + 10 minutes + 15 minutes + 30 minutes + 60 minutes + Infinite Tungkol Dito Ang Night Light ay gumagamit ng KCAL, na isang display tuning feature para sa mga bagong henerasyon ng mga aparatong Qualcomm, upang ayusin ang intensity ng blue light, na ginagawang mas kumportable para sa iyong mga mata kapag ginagamit mo ang iyong telepono sa madilim at tinutulungan kang matulog. Dahil gumagawa ito ng mga pagbabago sa antas ng driver, at hindi ito gumagamit ng anumang overlay ng software, ito ay friendly na baterya at ang pagbabago ay makikita sa lahat ng dako sa display. I-toggle ang on / off  (Susunod na araw) Gumamit ng mga oras ng paglubog ng araw / pagsikat ng araw Hindi makuha ang iyong huling kilalang lokasyon. - Panatilihin ang mga kasalukuyang halaga ng KCAL + Preserve KCAL values + Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Mga Kontribyutor Color Temperature Value of the color temperature to be set. Lower temperatures are better suitable for low light viewing. @@ -28,8 +36,8 @@ Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. KCAL Backup - KCAL Backup Settings - You can configure your old KCAL settings here. These settings will applied when night light is turned off. + Configure KCAL value + Configure your old KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -60,7 +68,8 @@ Automation List of profiles created Profiles are collection of settings which can be applied with one click, or let apps like Tasker to apply it for you using the automation capabilities that they provide. - Backup current KCAL values every time before Night Light is enabled + Backup every time + Backup current KCAL values every time before Night Light is enabled. F.A.Q Links Dashboard @@ -84,6 +93,7 @@ Enable light theme Enables light theme with light background and slightly different looks. Show support + Your appreciation and support keeps me motivated to keep on working on this project. Rate this app Donate Translate this app @@ -111,4 +121,12 @@ Pro version Get Pro version The pro version of Night Light has even better UI and cool new features and functions. By getting the pro version, you also show appreciation and support for the project and motivate me to continue working on it. Do you want to get pro version now? + Settings + Lock screen + Disable in lock screen + Disables Night Light in lock screen. Turns it back on (if required) when you unlock. + Service + Service is running + Fading in + None From 5cd37227893bade1c86a7079c0eb30827d63fc6b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:25 +0530 Subject: [PATCH 353/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 9b1dd22db1bd1c3d6c17dfa42453b8f88654aaf6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:26 +0530 Subject: [PATCH 354/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From cf2660eba775d9617ac1bc9dc27038d128621f17 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:28 +0530 Subject: [PATCH 355/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 84d66ee0fb66704d3fbedcd645dbdfe992b9d078 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:30 +0530 Subject: [PATCH 356/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 7ac1ba87ca8487b81c75eca4aceec6aaf51a5c9b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:31 +0530 Subject: [PATCH 357/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 911afcf60ea917555c62b51d29fe934fd63ea5c5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:33 +0530 Subject: [PATCH 358/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index e97a2bed..3c93d55f 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 9364d9a1fcf1da18767d9a4057e6bb85bada9dc6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:35 +0530 Subject: [PATCH 359/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From d6eea55775ef670df6035c8c83be62011f5a800a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:36 +0530 Subject: [PATCH 360/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 4dc127aa..f8493536 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 1607c4ac922322cc343b86b78083b79d3911e804 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:38 +0530 Subject: [PATCH 361/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index c32f275e..1382c6ec 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From e016563da817d2f6f6773826827e61e891f9a659 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:39 +0530 Subject: [PATCH 362/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 746e76482a876991d861e86b58c665c70d9d7003 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:41 +0530 Subject: [PATCH 363/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index e4a6bf4c..0bb5076f 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From caaf88dc37ef8d8ca8d404a1b3e66d53bb01144d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:42 +0530 Subject: [PATCH 364/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From be514bbc3fdee4e3fc964014f365bfd5b62ab656 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:44 +0530 Subject: [PATCH 365/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 503411b4..dae1c5d4 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From cf6de31239c188dc68bc59ed4cc82727c9fbd108 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:46 +0530 Subject: [PATCH 366/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 624c89e1fe07a9d015fa864681b1ddb9b16de73d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:47 +0530 Subject: [PATCH 367/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 3adb886606e4606ec8d994efc296a0fc1ca0e972 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:49 +0530 Subject: [PATCH 368/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 1a5c6b1a..ef57f8fd 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 734a13280c8261ac219777cd592d334775ab6d58 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:51 +0530 Subject: [PATCH 369/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From b81e52e21d688b6b5006263e7a8afa211b906341 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:53 +0530 Subject: [PATCH 370/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 0bea92508ed97365f81074c51191c71a125ad960 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:54 +0530 Subject: [PATCH 371/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 74cb61c2ffedbf08ea76983cc6606195d45ec8af Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:56 +0530 Subject: [PATCH 372/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 20e93b04..236b67b1 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 3ebb234669054fe49381ade848aa04634b1a60ec Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:57 +0530 Subject: [PATCH 373/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index d22f4477..e7a632e3 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 33a2b1c7339e8171a074326c13f2a08317e229f6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:03:59 +0530 Subject: [PATCH 374/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 9afe86c7..50bcb3d4 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 56eaaf7349843457c8961cc1bcfe3aabc5d050f9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Thu, 8 Oct 2020 16:04:00 +0530 Subject: [PATCH 375/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index 6e559650..786b92bc 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -129,4 +129,13 @@ Service is running Fading in None + Tutorial + Show tutorial + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! + You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. + Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. + Sets the interval at which the night light intensity fades in. + Sunset to sunrise + Functionality + Animations From 8ce410e256a2fa07653d257684a1e32395deecd5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:23 +0530 Subject: [PATCH 376/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From ecc3abf9f8c9b6fee349ad1b94be487a91acea74 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:25 +0530 Subject: [PATCH 377/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From c7af82aae30d642edbea8367389488b3e3843352 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:26 +0530 Subject: [PATCH 378/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 31e162b2a7c860fddd27d9514ec6b5fc20624052 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:28 +0530 Subject: [PATCH 379/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 2a111ae4a0b2a591e1d6843fe7f3317e8930f486 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:29 +0530 Subject: [PATCH 380/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 2f1513dc669b863f03fef45e4d0f2c5bf7b57857 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:32 +0530 Subject: [PATCH 381/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 3c93d55f..a85db5fd 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 22ea95e7638057cc4bcf9b0ddd2a837916c04d76 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:35 +0530 Subject: [PATCH 382/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 6698a40801f9aef359cfaf6cd0a939a7de03d0bf Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:36 +0530 Subject: [PATCH 383/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index f8493536..6d5b87f3 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -115,7 +115,7 @@ Gece lambasını açıp kapatmak için yukarıdaki ampule basın. Yoğunlukları değiştirmek için yukarıdaki ampule uzun basın. Devletler Uyku vakti - Uyku vakti modu ekranınızın gri tonlamasını yapar ve bu da sizi daha hızlı uykuya dalmanzı sağlar. Bu, diğer Gece Işığı ayarlarına bağlı olmayan ve buna müdahale etmeyen bağımsız bir moddur. Normal Gece Işığını kullanmak için bu modu devre dışı bırakmanız gerekir. bu modu etkinleştirmek veya devre dışı bırakmak için yatak simgesine dokunun. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Deneysel Doygunluk yolu Pro sürümü @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 71072e6f6f7c93bacec7d6d422cd35aa06ab5ca0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:38 +0530 Subject: [PATCH 384/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 1382c6ec..bb82efb3 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 9a5070cda136668dd44240db4873a462baf3cbf1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:40 +0530 Subject: [PATCH 385/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From e7505e65e160f1aca83ce6c453d228386c57ab96 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:41 +0530 Subject: [PATCH 386/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 0bb5076f..7054a385 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From d05611045a08406289f48ad7a2ad59fa362f8f57 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:42 +0530 Subject: [PATCH 387/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 6ac7840f60060e54d3d80424da723c6c1cb388a8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:44 +0530 Subject: [PATCH 388/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index dae1c5d4..a7385780 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From c1fac264be72337146529d5f8f64135fcc2f83ac Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:45 +0530 Subject: [PATCH 389/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 58c1a331ee32b0012aa1021de2918c86e1585252 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:47 +0530 Subject: [PATCH 390/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 06d8b48532f313f132dfedcaf6ba1f38975d8545 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:49 +0530 Subject: [PATCH 391/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index ef57f8fd..d3b8ce90 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 0907650c597dc89224a3d11454efaab8be5017da Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:50 +0530 Subject: [PATCH 392/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 917ed6abbaf64532ddd15c2fd9c0a3ab9a1e5278 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:53 +0530 Subject: [PATCH 393/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 0bcdb2c50bbd06a6cf9dd722765a9cde5f8ea3f6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:54 +0530 Subject: [PATCH 394/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 4629b2b31f313bc47f9c38b693d3d8f514fa3af1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:55 +0530 Subject: [PATCH 395/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 236b67b1..5c1e22d4 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 355336a94c8126190bd16840a544f19d94570459 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:57 +0530 Subject: [PATCH 396/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index e7a632e3..a29574c8 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From 31985b86a583119a782529632683672bbdd9e0c8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:04:59 +0530 Subject: [PATCH 397/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 50bcb3d4..872c91d6 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From cf4e07fec100abdb2fb06b56f8f8032f1f6078bd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 16 Oct 2020 22:05:00 +0530 Subject: [PATCH 398/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index 786b92bc..5eb9ca97 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -115,7 +115,7 @@ Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. States Bed time - Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. tap on the bed icon to enable or disable this mode. + Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. Experimental Saturation path Pro version @@ -138,4 +138,6 @@ Sunset to sunrise Functionality Animations + Bed time mode is enabled. + Bed time mode is disabled. From ac64ece17c0560e6bd5efa4062f6d920a041cbf3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:21 +0530 Subject: [PATCH 399/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 688d5e2c4490293e1152898cc84d1fbd7ee2d6f8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:22 +0530 Subject: [PATCH 400/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From f519549a07b9f6d46532400afc4c6ffe1e9649cc Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:24 +0530 Subject: [PATCH 401/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 028ed05f95717fa1698feb7e44ce94a1b7a85e46 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:25 +0530 Subject: [PATCH 402/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 13d5ec7e03afe55e086d74e38814b1d9ec2cd9f4 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:27 +0530 Subject: [PATCH 403/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 102c30da23ede4e3368e04521cf2976f61904531 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:28 +0530 Subject: [PATCH 404/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index a85db5fd..4038d841 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 1db023260c1afe128749816f46d3f7c3f95bd02d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:30 +0530 Subject: [PATCH 405/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 3bfb41c210efd07131d0b5e1935cbb52c9fce94a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:31 +0530 Subject: [PATCH 406/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 6d5b87f3..0fc99ff2 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From abb9632824766a15672d1034a049619996a1b2a3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:33 +0530 Subject: [PATCH 407/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index bb82efb3..e237d85c 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From b78fa3adadf38575eee4acff6fceb14fb81f2f6a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:34 +0530 Subject: [PATCH 408/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 48d2adc949dc4ee555550ae677c3182b979cb213 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:36 +0530 Subject: [PATCH 409/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 7054a385..575a10d0 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 0a05f9f0d96e960932acd0966f21391924fb64f2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:37 +0530 Subject: [PATCH 410/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 433b92655abdb3083ed545c203f49d22a3c3de71 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:39 +0530 Subject: [PATCH 411/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index a7385780..9bb3471a 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From d5a59e902bc5df6c929c4434d1f3519e2ea6aca7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:40 +0530 Subject: [PATCH 412/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 0a3ff583af5283e71d665d711dda7b1cb5a6e25a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:42 +0530 Subject: [PATCH 413/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 69d159a5675c41068850b73420be04b08d5b5f94 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:43 +0530 Subject: [PATCH 414/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index d3b8ce90..d7dea535 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From e1ae28b0fb22b06716acbc04641b82fc663e8c5c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:45 +0530 Subject: [PATCH 415/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 495e5d575ee3e4699e5b52274841c7c6641020e0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:46 +0530 Subject: [PATCH 416/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 4e7de497072220f9afe0ce64db67ecfed25f8f0e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:48 +0530 Subject: [PATCH 417/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From f23a52692046ea033c984c11beff9b6b29267644 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:51 +0530 Subject: [PATCH 418/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 5c1e22d4..d045c323 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 90da365cfb3d07966fc1c1e00d3edc7400c5d942 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:53 +0530 Subject: [PATCH 419/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index a29574c8..7d65b3b0 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 99e20994664f1d62f11d4a9a0abe6272257b3bdb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:54 +0530 Subject: [PATCH 420/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 872c91d6..fc659d43 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From 56521358b387c9163188ef8c5995d511074f792a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Mon, 2 Nov 2020 13:13:56 +0530 Subject: [PATCH 421/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index 5eb9ca97..e5870e3a 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -140,4 +140,9 @@ Animations Bed time mode is enabled. Bed time mode is disabled. + Tap to select colors + Please select a color configuration to proceed + Not selected + Not applicable + Because you chose to not enable Night Light! From ac20452eb0f51b5f4d8e78ff6f8b328bccca4a94 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:16:55 +0530 Subject: [PATCH 422/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 3bca2d54d9eaf686be5c0de31739b3549f455972 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:16:57 +0530 Subject: [PATCH 423/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From d144785d115e1afed658c450ad6235b1df266182 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:16:59 +0530 Subject: [PATCH 424/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 69eafd77c7ab94f838c977ea26d9d3d9047903a5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:00 +0530 Subject: [PATCH 425/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 5ad0663f73fc021d466215eead7d094dcb0fdb6d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:02 +0530 Subject: [PATCH 426/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From d716112dca57bebf1e29347eb3c0ae6443b6c541 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:04 +0530 Subject: [PATCH 427/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 4038d841..574271c0 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -27,6 +27,7 @@  (hari Berikutnya) Gunakan timing matahari terbit/matahari terbenam Tidak bisa mendapatkan lokasi terakhir yang diketahui. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Kontributor @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 920f6c97c954ec49112b98f65e80990833357d9e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:05 +0530 Subject: [PATCH 428/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 0d113321a4a7e4bd9b6a4841665b18edfb8706a2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:07 +0530 Subject: [PATCH 429/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 0fc99ff2..6e6cc8ed 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -27,6 +27,7 @@  (Sonraki gün) Günbatımı/gündoğumu zamanlamalarını kullan Bilinen son konumunuz alınamıyor. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Katkıda Bulunanlar @@ -35,9 +36,9 @@ Gecikme Gece Işığı ayarlarının önyüklenmeden sonra geri yükleneceği ve uygulanacağı gecikmeyi ayarlayın. Gece Işığı ayarları %s gecikmeden sonra uygulanacak. Görünüşe göre Gece Işığı ayarları geri yüklendi, ancak en son önyüklemeden sonra uygulanamadı. Ayarların önyüklemeden sonra başarıyla geri yüklenebilmesi ve uygulanabilmesi için bu gecikmeyi artırmayı düşünün. - KCAL Yedekleme + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Kırmızı Yeşil Mavi @@ -84,7 +85,6 @@ Minimum Yoğunluğu aç / kapat KCAL Sürücüsü - KCAL Sürücü Bilgileri Uygulama adı Anahtar yolu RGB dosya yolları @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 85ed527b5b8e1a4fc35647c3ecb3550cf3b234b6 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:09 +0530 Subject: [PATCH 430/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index e237d85c..fcefdad6 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -27,6 +27,7 @@  (Следующий день) От заката до рассвета Невозможно получить ваше последнее известное местоположение. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Авторы @@ -35,9 +36,9 @@ Delay Установите задержку, после которой параметры ночного света будут восстановлены и применены после загрузки. Параметры ночного света будут применены после %s сек. Похоже, параметры ночного света были восстановлены, но они не применились после последней загрузки. Рассмотрите возможность увеличения задержки, чтобы параметры можно было успешно восстановить и применить после загрузки. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Красный Зеленый Синий @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From ac79c1d67cd86c6b9b7d73299ad51caab57ded0f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:11 +0530 Subject: [PATCH 431/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 9aa30dd017f350dba8aee6bd630d9e53dba5c1c2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:12 +0530 Subject: [PATCH 432/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 575a10d0..e45803c6 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -27,6 +27,7 @@  (Następny dzień) Użyj ustawień czasu zachodu słońca / wschodu słońca Nie można uzyskać ostatnio znanej lokalizacji + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Współtwórcy @@ -35,9 +36,9 @@ Delay Ustaw opóźnienie po którym Night Light przywróci ustawienia i wdroży je po uruchomieniu. Ustawienia Night Light będą ustawione z %s opóźnieniem. Wygląda na to że ustawienia Night Light zostały przywrócone ale nie zostały wdrożone. Zalecane jest wydłużenie czasu opóżnienia po jakim ustawienia zostaną wdrożone. - Kopia zapasowa KCAL + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Czerwony Zielony Niebieski @@ -84,7 +85,6 @@ Minimum Przełącz intensywność Sterownik KCAL - Informacje o sterowniku KCAL Nazwa implementacji KCAL Ścieżka przełącznika Ścieżki plików RGB @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From fdd1aabd8a97b5a774c59ca8739962fea5cbd97e Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:14 +0530 Subject: [PATCH 433/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 37f71a63702498a9921cfd009faf860f607dcad3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:16 +0530 Subject: [PATCH 434/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 9bb3471a..30e7fec9 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -27,6 +27,7 @@  (siguiente día) Usa tiempos de amanecer/atardecer Incapaz de localizar tu última ubicación conocida. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contribuyentes @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 0faf9c3aa9f13466ede365f4348c58486cf873e9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:18 +0530 Subject: [PATCH 435/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 1e1ef5748f1fa0125b6ad3f44bcbe84d2197aec5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:20 +0530 Subject: [PATCH 436/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From ca022a692184c9acb49f8729138d7fb6dc3db3c2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:21 +0530 Subject: [PATCH 437/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index d7dea535..50b0d1ca 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -27,6 +27,7 @@  (giorno successivo) Usa orari dei tramonto/alba Impossibile ottenere la posizione. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Hanno contribuito @@ -35,9 +36,9 @@ Ritardo Imposta il ritardo dopo il quale le impostazioni di Night Light saranno ripristinate e applicate dopo l\'avvio. Le impostazioni di Night Light saranno applicate dopo %s secondi di ritardo. Sembra che le impostazioni di Night Light siano state ripristinate, ma non è stato possibile applicarle dopo l\'ultimo riavvio. Prova ad aumentare questo ritardo in modo che le impostazioni possano essere ripristinate e applicate dopo l\'avvio. - Backup KCAL + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Rosso Verde Blu @@ -84,7 +85,6 @@ Minimo Cambia intensità Driver KCAL - Informazioni driver KCAL Tipo di implementazione Cambia percorso Percorso del file RGB @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From b5aec7d6a768dec15764438baf4f1261326f6444 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:23 +0530 Subject: [PATCH 438/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 559be6176e39a827a1079a2583d12756972552ed Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:25 +0530 Subject: [PATCH 439/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 2ed8c5f1890a53666af6047880f50a2275d8dacd Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:26 +0530 Subject: [PATCH 440/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From e5893816f058545b4960aa59f677c2e4b150894b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:28 +0530 Subject: [PATCH 441/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index d045c323..5f9dcfcb 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -27,6 +27,7 @@  (Επόμενη ημέρα) Χρήση ωρών Ανατολής/Δύσης Ηλίου Δεν ήταν δυνατή η λήψη της τελευταίας σας γνωστής τοποθεσίας. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From f6f5c00416203aaa3b117e4db1c6b4749e819cf0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:29 +0530 Subject: [PATCH 442/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 7d65b3b0..8239b0d9 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From a82b7104200a66c7d4231674564aa08d4420c3fb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:31 +0530 Subject: [PATCH 443/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 48 ++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index fc659d43..23a983ca 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -27,6 +27,7 @@  (Next day) Use sunset/sunrise timings Unable to get your last known location. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Contributors @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From 9891b168f45a32ddcbdca8204873d2737aa2b4e5 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 10:17:33 +0530 Subject: [PATCH 444/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 48 +++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index e5870e3a..403e6923 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -27,6 +27,7 @@  (Susunod na araw) Gumamit ng mga oras ng paglubog ng araw / pagsikat ng araw Hindi makuha ang iyong huling kilalang lokasyon. + Current location determined. Preserve KCAL values Preserves old KCAL values before Night Light is turned on, and the applies the same when it is turned off. Mga Kontribyutor @@ -35,9 +36,9 @@ Delay Set the delay after which Night Light settings will be restored and applied after boot. Night Light settings will be applied after %s delay. Looks like Night Light settings were restored but could not be applied after most recent boot. Consider increasing this delay so that settings can be successfully restored and applied after boot. - KCAL Backup + Default KCAL values Configure KCAL value - Configure your old KCAL settings, which will be applied when night light is turned off. + Configure your default KCAL settings, which will be applied when night light is turned off. Red Green Blue @@ -84,7 +85,6 @@ Minimum Toggle intensity KCAL Driver - KCAL Driver Information Implementation name Switch path RGB file path(s) @@ -131,10 +131,10 @@ None Tutorial Show tutorial - You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set start and end times and you are good to go. Fire and forget! - You can also set the automation schedule from sunset to sunrise. Night light will turn on at sunset and turn off at sunrise. - Slowly transitions from minimum intensity to maximum intensity. Fade in will start at the start of automation and end at the fade stop time. - Sets the interval at which the night light intensity fades in. + You can let the app to automatically to turn the night light on and off at specific times. Simply enable automation, set up automation routines and you are good to go. Fire and forget! + Setting sunset and sunrise times are supported. Location permissions are needed for determining sunset and sunrise times. + Slowly transitions from a selected KCAL value to the another KCAL value. Fade in/out will take place during the time period of an automation routine. + Sets the interval at which the night light intensity fades in/out. Sunset to sunrise Functionality Animations @@ -145,4 +145,38 @@ Not selected Not applicable Because you chose to not enable Night Light! + Routine name + Fade off + Fade in + Fade out + Fade behavior + Tap to choose time. + Please set a time to continue. + The time you have chosen overlaps with other routines. Please choose a different time to continue. + Sunset + Sunrise + Custom time + Pick time + Automation routines + Setup automation routines + Create routine + Update routine + Settings + Starting value + Ending value + Are you sure you want to delete this routine? + No routines created + Created routines will be listed here! + Location + Re-detect location + Outside routine + Choose whether or not to enable night light when no routines are active. + Choose RGB values + Custom RGB + Color choosing + Choose the KCAL colors that you want. If you want to pick the colors in a different mode (temperature and manual RGB supported), tap the settings button to do so. + Once you have chosen the colors, tap the back button or perform the back gesture to confirm your selection. Do the same to dismiss this message 😊. + Re-apply routine alarms + Re-applies the alarms that needs to be fired for the set routines. + Routine alarms re-applied From d2c7975f070a0ef3d38f6d850805d950932e6663 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:02:44 +0530 Subject: [PATCH 445/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 2358e3bb8f5ee6396384df71edc6f494100c02f7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:02:46 +0530 Subject: [PATCH 446/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From bcdf798857565296043aaad0b36286a04f2ef274 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:02:48 +0530 Subject: [PATCH 447/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 842ebfe9c229dfd5d6f0d351a496ac44fa2151b8 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:02:50 +0530 Subject: [PATCH 448/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 0a771fb6dd2935b3eb788c990b75d79593c943a1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:02:52 +0530 Subject: [PATCH 449/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From df89fb9f008aa8439ba1e278ed690bc53fabf4c0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:02:53 +0530 Subject: [PATCH 450/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index 574271c0..df8ce475 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 9ad71ea4b0b2db6240347ffee34044d76c3f9c8d Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:02:55 +0530 Subject: [PATCH 451/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From a01e0ee914c51770869749768920a1b3298098ec Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:02:56 +0530 Subject: [PATCH 452/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 6e6cc8ed..46ceff37 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -112,7 +112,7 @@ Gözyaşı RenkEtkinliği Bilgi - Gece lambasını açıp kapatmak için yukarıdaki ampule basın. Yoğunlukları değiştirmek için yukarıdaki ampule uzun basın. + Press the bulb above to toggle night light. Devletler Uyku vakti Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From f98f728caca2ae1eadfe20b339942f47dd0c5b15 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:02:58 +0530 Subject: [PATCH 453/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index fcefdad6..253b2352 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From c95a51b8823b4f2318ef9ce93cbdf2e1a64b265f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:00 +0530 Subject: [PATCH 454/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From a3a35573c4cfe382eb50ba830202bd07caa6dbaf Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:01 +0530 Subject: [PATCH 455/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index e45803c6..3b9f4823 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 6236e86d725ecb7a39e983d5c8c08ae6a478aeda Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:03 +0530 Subject: [PATCH 456/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From d36e12dce53fe0c7135d916b8b7a779937b437a0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:05 +0530 Subject: [PATCH 457/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index 30e7fec9..f5bdbe62 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 01a538ef670a9a23b2d0c4aca340034872edf2c0 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:07 +0530 Subject: [PATCH 458/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 1b69f7ac2d22db70905a0b228ff24b95b7ebfbdc Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:08 +0530 Subject: [PATCH 459/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 2f98eb76ff05fdf52e8037232ff0d603384ab192 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:10 +0530 Subject: [PATCH 460/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index 50b0d1ca..a87b5d4f 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From f47bcf9ce268f2f8d0fde2d30081d03413e365b1 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:12 +0530 Subject: [PATCH 461/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From f4fd20edda4e35afea905b334ece27d7ddd37ebc Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:13 +0530 Subject: [PATCH 462/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From fd720ac8b482568973e5d9cc7a646e042767049b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:15 +0530 Subject: [PATCH 463/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 0668449aba0b4d2b1f82d2aad0d079486c4c4bbe Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:17 +0530 Subject: [PATCH 464/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 5f9dcfcb..661b54ba 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From ea38fc760c4aed4e99152b391dbf0451d55b12b7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:18 +0530 Subject: [PATCH 465/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 8239b0d9..5c4da465 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 156fe6fcb2f018b981d12de71527f5caa396a5cb Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:20 +0530 Subject: [PATCH 466/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 23a983ca..57dcbc77 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 24b76378074c1c40067d7ad4670bff4b8e5c9786 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Sat, 21 Nov 2020 12:03:22 +0530 Subject: [PATCH 467/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index 403e6923..ef43d8c0 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -112,7 +112,7 @@ Teardrop ColorActivity Info - Press the bulb above to toggle night light. Long press the bulb above to toggle intensities. + Press the bulb above to toggle night light. States Bed time Bed time mode makes your screen grayscale which can make you fall asleep faster. This is an independent mode which does not depend on and interfere with other Night Light settings. In order to use normal Night Light, you need to disable this mode. From 1e779266a1eb6f501fb95632a6731f62abc67a7a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:32:47 +0530 Subject: [PATCH 468/490] New translations strings.xml (French) --- app/src/main/res/values-fr/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fr/strings.xml b/app/src/main/res/values-fr/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-fr/strings.xml +++ b/app/src/main/res/values-fr/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From c93094d33fc1cca895593aa2167d01246a245f7a Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:32:49 +0530 Subject: [PATCH 469/490] New translations strings.xml (Norwegian) --- app/src/main/res/values-no/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-no/strings.xml b/app/src/main/res/values-no/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-no/strings.xml +++ b/app/src/main/res/values-no/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 20fcac77ddc713dcd8245e76b54ba7a113e04cf3 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:32:50 +0530 Subject: [PATCH 470/490] New translations strings.xml (Hindi) --- app/src/main/res/values-hi/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hi/strings.xml b/app/src/main/res/values-hi/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-hi/strings.xml +++ b/app/src/main/res/values-hi/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 65b998a59393b75d405b6032b366473bfd8c9160 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:32:52 +0530 Subject: [PATCH 471/490] New translations strings.xml (Croatian) --- app/src/main/res/values-hr/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-hr/strings.xml b/app/src/main/res/values-hr/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-hr/strings.xml +++ b/app/src/main/res/values-hr/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 76c631c89e898b6ee9d014c01f5ae7bbc0373b15 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:32:54 +0530 Subject: [PATCH 472/490] New translations strings.xml (Thai) --- app/src/main/res/values-th/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-th/strings.xml b/app/src/main/res/values-th/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-th/strings.xml +++ b/app/src/main/res/values-th/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 63d97613f90c0262d0bf9d59a1127e9c11a4def7 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:32:56 +0530 Subject: [PATCH 473/490] New translations strings.xml (Indonesian) --- app/src/main/res/values-id/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-id/strings.xml b/app/src/main/res/values-id/strings.xml index df8ce475..d744205f 100644 --- a/app/src/main/res/values-id/strings.xml +++ b/app/src/main/res/values-id/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From be65bc355bf6891862b7b3c9b4e89993039eb2a2 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:32:58 +0530 Subject: [PATCH 474/490] New translations strings.xml (Chinese Simplified) --- app/src/main/res/values-zh/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-zh/strings.xml b/app/src/main/res/values-zh/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-zh/strings.xml +++ b/app/src/main/res/values-zh/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From a5982ccab391883b75622fb99e63c85836a83863 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:32:59 +0530 Subject: [PATCH 475/490] New translations strings.xml (Turkish) --- app/src/main/res/values-tr/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-tr/strings.xml b/app/src/main/res/values-tr/strings.xml index 46ceff37..ef7b093f 100644 --- a/app/src/main/res/values-tr/strings.xml +++ b/app/src/main/res/values-tr/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 3be1082ef4de90d24cca06e6cea935d00178a226 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:01 +0530 Subject: [PATCH 476/490] New translations strings.xml (Russian) --- app/src/main/res/values-ru/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ru/strings.xml b/app/src/main/res/values-ru/strings.xml index 253b2352..3d4e3d08 100644 --- a/app/src/main/res/values-ru/strings.xml +++ b/app/src/main/res/values-ru/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From b348d2f7a8453d973d2048b1cd1fe26f9ab39adf Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:03 +0530 Subject: [PATCH 477/490] New translations strings.xml (Portuguese) --- app/src/main/res/values-pt/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pt/strings.xml b/app/src/main/res/values-pt/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-pt/strings.xml +++ b/app/src/main/res/values-pt/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 49405757e67b84782f68ecc8ecd354a6a212258f Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:05 +0530 Subject: [PATCH 478/490] New translations strings.xml (Polish) --- app/src/main/res/values-pl/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-pl/strings.xml b/app/src/main/res/values-pl/strings.xml index 3b9f4823..d32d17ea 100644 --- a/app/src/main/res/values-pl/strings.xml +++ b/app/src/main/res/values-pl/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From db1cf301fee31a49ffb3ce68504dda80c1b24741 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:07 +0530 Subject: [PATCH 479/490] New translations strings.xml (Dutch) --- app/src/main/res/values-nl/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-nl/strings.xml b/app/src/main/res/values-nl/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-nl/strings.xml +++ b/app/src/main/res/values-nl/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 175851a269690f2ccf8823cc125ad91718452f3c Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:09 +0530 Subject: [PATCH 480/490] New translations strings.xml (Spanish) --- app/src/main/res/values-es/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-es/strings.xml b/app/src/main/res/values-es/strings.xml index f5bdbe62..b3c569cc 100644 --- a/app/src/main/res/values-es/strings.xml +++ b/app/src/main/res/values-es/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 68a72818feab7b5a530d2fb695a27992c9f31656 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:11 +0530 Subject: [PATCH 481/490] New translations strings.xml (Korean) --- app/src/main/res/values-ko/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ko/strings.xml b/app/src/main/res/values-ko/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-ko/strings.xml +++ b/app/src/main/res/values-ko/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 85d64d42af0872e8fd4a5827c3efe9c8473c4545 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:13 +0530 Subject: [PATCH 482/490] New translations strings.xml (Japanese) --- app/src/main/res/values-ja/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ja/strings.xml b/app/src/main/res/values-ja/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-ja/strings.xml +++ b/app/src/main/res/values-ja/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 7b740786bc896b479caaea161546f5b71a86bfab Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:16 +0530 Subject: [PATCH 483/490] New translations strings.xml (Italian) --- app/src/main/res/values-it/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-it/strings.xml b/app/src/main/res/values-it/strings.xml index a87b5d4f..8f1819f7 100644 --- a/app/src/main/res/values-it/strings.xml +++ b/app/src/main/res/values-it/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 0b1ee0af3ef74702e229c75053fae428a8d7d558 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:18 +0530 Subject: [PATCH 484/490] New translations strings.xml (Hebrew) --- app/src/main/res/values-he/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-he/strings.xml b/app/src/main/res/values-he/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-he/strings.xml +++ b/app/src/main/res/values-he/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 32e6db5bd2ed6baa3c3015ac7c368656a19b4208 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:20 +0530 Subject: [PATCH 485/490] New translations strings.xml (Irish) --- app/src/main/res/values-ga/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-ga/strings.xml b/app/src/main/res/values-ga/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-ga/strings.xml +++ b/app/src/main/res/values-ga/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From ba18e205686bd4b781667c4a5e3afbac3bbd2710 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:22 +0530 Subject: [PATCH 486/490] New translations strings.xml (Finnish) --- app/src/main/res/values-fi/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fi/strings.xml b/app/src/main/res/values-fi/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-fi/strings.xml +++ b/app/src/main/res/values-fi/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 87463fb02368701e4dc6f209bdc6b2bdd3175eac Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:24 +0530 Subject: [PATCH 487/490] New translations strings.xml (Greek) --- app/src/main/res/values-el/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-el/strings.xml b/app/src/main/res/values-el/strings.xml index 661b54ba..f284d6f0 100644 --- a/app/src/main/res/values-el/strings.xml +++ b/app/src/main/res/values-el/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 4a3155aa8432acdd0dadbcc0e88466e78cc0daf9 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:29 +0530 Subject: [PATCH 488/490] New translations strings.xml (German) --- app/src/main/res/values-de/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-de/strings.xml b/app/src/main/res/values-de/strings.xml index 5c4da465..7c66a84c 100644 --- a/app/src/main/res/values-de/strings.xml +++ b/app/src/main/res/values-de/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From 463caa7e09c7f071b418176f0c528c4f9b795290 Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:31 +0530 Subject: [PATCH 489/490] New translations strings.xml (Czech) --- app/src/main/res/values-cs/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-cs/strings.xml b/app/src/main/res/values-cs/strings.xml index 57dcbc77..46eed520 100644 --- a/app/src/main/res/values-cs/strings.xml +++ b/app/src/main/res/values-cs/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine. From a3c750d2c68254907e5253024b66f68f20a09b2b Mon Sep 17 00:00:00 2001 From: Avinaba Dalal Date: Fri, 4 Dec 2020 23:33:33 +0530 Subject: [PATCH 490/490] New translations strings.xml (Filipino) --- app/src/main/res/values-fil/strings.xml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/app/src/main/res/values-fil/strings.xml b/app/src/main/res/values-fil/strings.xml index ef43d8c0..1cccd1a8 100644 --- a/app/src/main/res/values-fil/strings.xml +++ b/app/src/main/res/values-fil/strings.xml @@ -157,7 +157,7 @@ Sunrise Custom time Pick time - Automation routines + Routines Setup automation routines Create routine Update routine @@ -179,4 +179,5 @@ Re-apply routine alarms Re-applies the alarms that needs to be fired for the set routines. Routine alarms re-applied + Please set a name of this routine.