data.proto

// Copyright 2014 The Cockroach Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
// implied. See the License for the specific language governing
// permissions and limitations under the License.

syntax = "proto3";
package cockroach.roachpb;
option go_package = "roachpb";

import "roachpb/metadata.proto";
import "storage/engine/enginepb/mvcc.proto";
import "storage/engine/enginepb/mvcc3.proto";
import "util/hlc/timestamp.proto";
import "gogoproto/gogo.proto";

// Span is a key range with an inclusive start Key and an exclusive end Key.
message Span {
  option (gogoproto.equal) = true;

  option (gogoproto.goproto_stringer) = false;
  option (gogoproto.populate) = true;

  reserved 1, 2;
  // The start key of the key range.
  bytes key = 3 [(gogoproto.casttype) = "Key"];
  // The end key of the key range. The value is empty if the key range
  // contains only a single key. Otherwise, it must order strictly after Key.
  // In such a case, the Span encompasses the key range from Key to EndKey,
  // including Key and excluding EndKey.
  bytes end_key = 4 [(gogoproto.casttype) = "Key"];
}

// ValueType defines a set of type constants placed in the "tag" field of Value
// messages. These are defined as a protocol buffer enumeration so that they
// can be used portably between our Go and C code. The tags are used by the
// RocksDB Merge Operator to perform specialized merges.
enum ValueType {
  // This is a subset of the SQL column type values, representing the underlying
  // storage for various types. The DELIMITED_foo entries each represent a foo
  // variant that self-delimits length.
  UNKNOWN = 0;
  reserved 7;
  INT = 1;
  FLOAT = 2;
  BYTES = 3;
  DELIMITED_BYTES = 8;
  TIME = 4;
  DECIMAL = 5;
  DELIMITED_DECIMAL = 9;
  DURATION = 6;

  // TUPLE represents a DTuple, encoded as repeated pairs of varint field number
  // followed by a value encoded Datum.
  TUPLE = 10;

  // TIMESERIES is applied to values which contain InternalTimeSeriesData.
  TIMESERIES = 100;
}

// Value specifies the value at a key. Multiple values at the same key are
// supported based on timestamp. The data stored within a value is typed
// (ValueType) and custom encoded into the raw_bytes field. A custom encoding
// is used instead of separate proto fields to avoid proto overhead and to
// avoid unnecessary encoding and decoding as the value gets read from disk and
// passed through the network. The format is:
//
//   <4-byte-checksum><1-byte-tag><encoded-data>
//
// A CRC-32-IEEE checksum is computed from the associated key, tag and encoded
// data, in that order.
//
// TODO(peter): Is a 4-byte checksum overkill when most (all?) values
// will be less than 64KB?
message Value {
  option (gogoproto.equal) = true;

  // raw_bytes contains the encoded value and checksum.
  bytes raw_bytes = 1;
  // Timestamp of value.
  util.hlc.Timestamp timestamp = 2 [(gogoproto.nullable) = false];
}

// KeyValue is a pair of Key and Value for returned Key/Value pairs
// from ScanRequest/ScanResponse. It embeds a Key and a Value.
message KeyValue {
  bytes key = 1 [(gogoproto.casttype) = "Key"];
  Value value = 2 [(gogoproto.nullable) = false];
}

// A StoreIdent uniquely identifies a store in the cluster. The
// StoreIdent is written to the underlying storage engine at a
// store-reserved system key (KeyLocalIdent).
message StoreIdent {
  bytes cluster_id = 1 [(gogoproto.nullable) = false,
      (gogoproto.customname) = "ClusterID",
      (gogoproto.customtype) = "github.com/cockroachdb/cockroach/pkg/util/uuid.UUID"];
  int32 node_id = 2 [(gogoproto.customname) = "NodeID", (gogoproto.casttype) = "NodeID"];
  int32 store_id = 3 [(gogoproto.customname) = "StoreID", (gogoproto.casttype) = "StoreID"];
}

// A SplitTrigger is run after a successful commit of an AdminSplit
// command. It provides the updated left hand side of the split's
// range descriptor (left_desc) and the new range descriptor covering
// the right hand side of the split (right_desc). This information
// allows the final bookkeeping for the split to be completed and the
// new range put into operation.
message SplitTrigger {
  option (gogoproto.equal) = true;

  RangeDescriptor left_desc = 1 [(gogoproto.nullable) = false];
  RangeDescriptor right_desc = 2 [(gogoproto.nullable) = false];
  reserved 3;
}

// A MergeTrigger is run after a successful commit of an AdminMerge
// command. It provides the updated left hand side of the split's
// range descriptor (left_desc) that now encompasses what was
// originally both ranges and the soon-to-be-invalid range descriptor
// that used to cover the subsumed, right hand side of the merge
// (right_desc). This information allows the final bookkeeping for the
// merge to be completed and put into operation.
message MergeTrigger {
  option (gogoproto.equal) = true;

  RangeDescriptor left_desc = 1 [(gogoproto.nullable) = false];
  RangeDescriptor right_desc = 2 [(gogoproto.nullable) = false];

  reserved 3;

  storage.engine.enginepb.MVCCStats right_mvcc_stats = 4 [
    (gogoproto.customname) = "RightMVCCStats",
    (gogoproto.nullable) = false
  ];

  // FreezeStart is the time at which the right-hand range promised to stop
  // serving any traffic. It is suitable for use as the timestamp cache's low
  // water mark for the keys previously owned by the right-hand range.
  util.hlc.Timestamp freeze_start = 5 [(gogoproto.nullable) = false];
}

// ReplicaChangeType is a parameter of ChangeReplicasTrigger.
enum ReplicaChangeType {
  option (gogoproto.goproto_enum_prefix) = false;

  ADD_REPLICA = 0;
  REMOVE_REPLICA = 1;
}

message ChangeReplicasTrigger {
  option (gogoproto.equal) = true;

  option (gogoproto.goproto_stringer) = false;

  // TODO(benesch): this trigger should just specify the updated descriptor,
  // like the split and merge triggers, so that the receiver doesn't need to
  // reconstruct the range descriptor update.

  ReplicaChangeType change_type = 1;
  // The replica being modified.
  ReplicaDescriptor replica = 2 [(gogoproto.nullable) = false];
  // The new replica list with this change applied.
  repeated ReplicaDescriptor updated_replicas = 3 [(gogoproto.nullable) = false];
  int32 next_replica_id = 4 [(gogoproto.customname) = "NextReplicaID", (gogoproto.casttype) = "ReplicaID"];
}

// ModifiedSpanTrigger indicates that a specific span has been modified.
// This can be used to trigger scan-and-gossip for the given span.
message ModifiedSpanTrigger {
  option (gogoproto.equal) = true;

  bool system_config_span = 1;
  // node_liveness_span is set to indicate that node liveness records
  // need re-gossiping after modification or range lease updates. The
  // span is set to a single key when nodes update their liveness records
  // with heartbeats to extend the expiration timestamp. Changes to the
  // range lease for the range containing node liveness triggers re-gossip
  // of the entire node liveness key range.
  Span node_liveness_span = 2;
}

// InternalCommitTrigger encapsulates all of the internal-only commit triggers.
// Only one may be set.
message InternalCommitTrigger {
  option (gogoproto.equal) = true;

  // InternalCommitTrigger is always nullable, and these getters are
  // nil-safe, which is often convenient.
  option (gogoproto.goproto_getters) = true;

  SplitTrigger split_trigger = 1;
  MergeTrigger merge_trigger = 2;
  ChangeReplicasTrigger change_replicas_trigger = 3;
  ModifiedSpanTrigger modified_span_trigger = 4;
}

// TransactionStatus specifies possible states for a transaction.
enum TransactionStatus {
  option (gogoproto.goproto_enum_prefix) = false;

  // PENDING is the default state for a new transaction. Transactions
  // move from PENDING to one of COMMITTED or ABORTED. Mutations made
  // as part of a PENDING transactions are recorded as "intents" in
  // the underlying MVCC model.
  PENDING = 0;
  // COMMITTED is the state for a transaction which has been
  // committed. Mutations made as part of a transaction which is moved
  // into COMMITTED state become durable and visible to other
  // transactions, moving from "intents" to permanent versioned
  // values.
  COMMITTED = 1;
  // ABORTED is the state for a transaction which has been aborted.
  // Mutations made as part of a transaction which is moved into
  // ABORTED state are deleted and are never made visible to other
  // transactions.
  ABORTED = 2;
}

message ObservedTimestamp {
  option (gogoproto.equal) = true;

  option (gogoproto.populate) = true;

  int32 node_id = 1 [(gogoproto.customname) = "NodeID", (gogoproto.casttype) = "NodeID"];
  util.hlc.Timestamp timestamp = 2 [(gogoproto.nullable) = false];
}

// A Transaction is a unit of work performed on the database.
// Cockroach transactions support two isolation levels: snapshot
// isolation and serializable snapshot isolation. Each Cockroach
// transaction is assigned a random priority. This priority will be
// used to decide whether a transaction will be aborted during
// contention.
//
// If you add fields to Transaction you'll need to update
// Transaction.Clone. Failure to do so will result in test failures.
message Transaction {
  option (gogoproto.equal) = true;

  option (gogoproto.goproto_stringer) = false;
  option (gogoproto.populate) = true;

  // The transaction metadata. These are persisted with every intent.
  storage.engine.enginepb.TxnMeta meta = 1 [(gogoproto.nullable) = false, (gogoproto.embed) = true];
  // A free-text identifier for debug purposes.
  string name = 2;
  TransactionStatus status = 4;
  util.hlc.Timestamp last_heartbeat = 5 [(gogoproto.nullable) = false];
  // The original timestamp at which the transaction started. For serializable
  // transactions, if the timestamp drifts from the original timestamp, the
  // transaction will retry unless we manage to "refresh the reads" - see
  // refreshed_timestamp.
  //
  // This timestamp is the one at which all transactions will read, unless
  // refreshed_timestamp is set. It is also, surprisingly, the timestamp at
  // which transactions will provisionally _write_ (i.e. intents are written at
  // this orig_timestamp and, after commit, when the intents are resolved,
  // their timestamps are bumped to the to the commit timestamp), if
  // refreshed_timestamp isn't set.
  // This is ultimately because of correctness concerns around SNAPSHOT
  // transactions.
  //
  // Intuitively, one could think that the timestamp at which intents should be
  // written should be the provisional commit timestamp, and while this is
  // morally true, consider the following scenario, where txn1 is a SNAPSHOT
  // txn:
  //
  // - txn1 at orig_timestamp=5 reads key1: (value) 1.
  // - txn1 writes elsewhere, has its commit timestamp increased to 20.
  // - txn2 at orig_timestamp=10 reads key1: 1
  // - txn2 increases the value by 5: key1: 6 and commits
  // - txn1 increases the value by 1: key1: 2, attempts commit
  //
  // If txn1 uses its orig_timestamp for updating key1 (as it does), it
  // conflicts with txn2's committed value (which is at timestamp 10, in the
  // future of 5), and restarts.
  // Using instead its candidate commit timestamp, it wouldn't see a conflict
  // and commit, but this is not the expected outcome (the expected outcome is
  // {key1: 6} (since txn1 is not expected to commit)) and we would be
  // experiencing the Lost Update Anomaly.
  //
  // Note that in practice, before restarting, txn1 would still lay down an
  // intent (just above the committed value) not with the intent to commit it,
  // but to avoid being starved by short-lived transactions on that key which
  // would otherwise not have to go through conflict resolution with txn1.
  //
  // Again, keep in mind that, when the transaction commits, all the intents are
  // bumped to the commit timestamp (otherwise, pushing a transaction wouldn't
  // achieve anything).
  util.hlc.Timestamp orig_timestamp = 6 [(gogoproto.nullable) = false];
  // Initial Timestamp + clock skew. Reads which encounter values with
  // timestamps between timestamp and max_timestamp trigger a txn
  // retry error, unless the node being read is listed in observed_timestamps
  // (in which case no more read uncertainty can occur).
  // The case max_timestamp < timestamp is possible for transactions which have
  // been pushed; in this case, max_timestamp should be ignored.
  util.hlc.Timestamp max_timestamp = 7 [(gogoproto.nullable) = false];
  // The refreshed timestamp is the timestamp at which the transaction
  // can commit without necessitating a serializable restart. This
  // value is forwarded to the transaction's current timestamp (meta.timestamp)
  // if the transaction coordinator is able to refresh all refreshable spans
  // encountered during the course of the txn. If set, this take precedence
  // over orig_timestamp and is the timestamp at which the transaction both
  // reads and writes going forward.
  util.hlc.Timestamp refreshed_timestamp = 15 [(gogoproto.nullable) = false];
  // A list of <NodeID, timestamp> pairs. The list maps NodeIDs to timestamps
  // as observed from their local clock during this transaction. The purpose of
  // this map is to avoid uncertainty related restarts which normally occur
  // when reading a value in the near future as per the max_timestamp field.
  //
  // Morally speaking, having an entry for a node in this map means that this
  // node has been visited before, and that no more uncertainty restarts are
  // expected for operations served from it. However, this is not entirely
  // accurate. For example, say a txn starts with orig_timestamp=1 (and some
  // large max_timestamp). It then reads key "a" from node A, registering an
  // entry `A -> 5` in the process (`5` happens to be a timestamp taken off
  // that node's clock at the end of the read).
  // Now assume that some other transaction writes and commits a value at key "b"
  // and timestamp 4 (again, served by node A), and our transaction attempts to
  // read that key. Since there is an entry in its observed_timestamps for A,
  // our uncertainty window is `[orig_timestamp, 5) = [1, 5)` but the value at
  // key "b" is in that window, and so we will restart. However, we will restart
  // with a timestamp that is at least high as our entry in the map for node A,
  // so no future operation on node A will be uncertain.
  //
  // Thus, expressed properly, you could say that when a node has been read from
  // successfully before, uncertainty on that node is restricted to values with
  // timestamps in the interval [orig_timestamp, first_visit_timestamp), and
  // that no node will trigger restarts more than once (and in fact, usually
  // the first restart also bumps the txn timestamp enough to clear all other
  // nodes).
  //
  // When this list holds a corresponding entry for the node the current
  // request is executing on, we can run the command with the map's timestamp
  // as the top boundary of our uncertainty interval, limiting (and often
  // avoiding) uncertainty restarts.
  //
  // When a transaction is first initialized on a node, it may use a timestamp
  // from the local hybrid logical clock to initialize the corresponding entry
  // in the map. In particular, if `orig_timestamp` is taken from that node's
  // clock, we may add that to the map, which eliminates read uncertainty for
  // reads on that node.
  //
  // The list of observed timestamps is kept sorted by NodeID. Use
  // Transaction.UpdateObservedTimestamp to maintain the sorted order.
  repeated ObservedTimestamp observed_timestamps = 8 [(gogoproto.nullable) = false];
  // Writing is true if the transaction has previously sent a Begin transaction
  // (i.e. if it ever attempted to perform a write, so if it ever attempted to
  // leave intents (across retries)). The flag will be set even if the BeginTxn
  // batch failed.
  // When set, the AbortCache must be checked by reads so that they don't miss
  // to see the txn's previous writes.
  bool writing = 9;
  // If this is true, the transaction must retry. Relevant only for
  // SNAPSHOT transactions: a SERIALIZABLE transaction would have to
  // retry anyway due to its commit timestamp having moved forward.
  // This bool is set instead of immediately returning a txn retry
  // error so that intents can continue to be laid down, minimizing
  // work required on txn restart.
  bool write_too_old = 12;
  // If retry_on_push is true, the transaction must retry in the event
  // that the commit timestamp is pushed forward. This flag is set if
  // the transaction contains any calls to DeleteRange, in order to
  // prevent the LostDeleteRange anomaly. This flag is relevant only
  // for SNAPSHOT transactions.
  bool retry_on_push = 13;
  repeated Span intents = 11 [(gogoproto.nullable) = false];
  // Epoch zero timestamp is used to keep track of the earliest timestamp
  // that any epoch of the transaction used. This is set only if the
  // transaction is restarted and the epoch is bumped. It is used during
  // intent resolution to more efficiently scan for intents.
  util.hlc.Timestamp epoch_zero_timestamp = 14 [(gogoproto.nullable) = false];
  // This flag is set if the transaction's original timestamp was
  // "leaked" beyond the transaction (i.e. if returned via NOW() or
  // transaction_timestamp()). If true, this prevents optimizations
  // which commit at a higher timestamp without resorting to a
  // client-side retry.
  bool orig_timestamp_was_observed = 16;
}

// A Intent is a Span together with a Transaction metadata and its status.
message Intent {
  option (gogoproto.equal) = true;

  Span span = 1 [(gogoproto.nullable) = false, (gogoproto.embed) = true];
  storage.engine.enginepb.TxnMeta txn = 2 [(gogoproto.nullable) = false];
  TransactionStatus status = 3;
}

// A SequencedWrite is a point write to a key with a certain sequence number.
//
// TODO(nvanbenschoten/tschottdorf): This message type can be used as the
// PromisedWrites repeated field in EndTransaction in the parallel commits
// proposal (#24194).
message SequencedWrite {
  // The key that the write was made at.
  bytes key = 1 [(gogoproto.casttype) = "Key"];
  // The sequence number of the request that created the write.
  int32 sequence = 2;
}

// Lease contains information about range leases including the
// expiration and lease holder.
message Lease {
  option (gogoproto.goproto_stringer) = false;
  option (gogoproto.populate) = true;

  // The start is a timestamp at which the lease begins. This value
  // must be greater than the last lease expiration or the lease request
  // is considered invalid.
  util.hlc.Timestamp start = 1 [(gogoproto.nullable) = false];

  // The expiration is a timestamp at which the lease expires. This means that
  // a new lease can be granted for a later timestamp.
  util.hlc.Timestamp expiration = 2 [(gogoproto.moretags) = "cockroachdb:\"randnullable\""];

  // The address of the would-be lease holder.
  ReplicaDescriptor replica = 3 [(gogoproto.nullable) = false];

  // The start of the lease stasis period. This field is deprecated.
  util.hlc.Timestamp deprecated_start_stasis = 4 [(gogoproto.moretags) = "cockroachdb:\"randnullable\""];

  // The current timestamp when this lease has been proposed. Used after a
  // transfer and after a node restart to enforce that a node only uses leases
  // proposed after the time of the said transfer or restart. This is nullable
  // to help with the rollout (such that a lease applied by some nodes before
  // the rollout and some nodes after the rollout is serialized the same).
  // TODO(andrei): Make this non-nullable after the rollout.
  util.hlc.Timestamp proposed_ts  = 5 [(gogoproto.customname) = "ProposedTS"];

  // The epoch of the lease holder's node liveness entry. If this value
  // is non-zero, the start and expiration values are ignored.
  int64 epoch = 6;

  // A zero-indexed sequence number which is incremented during the acquisition
  // of each new range lease that is not equivalent to the previous range lease
  // (i.e. an acquisition that implies a leaseholder change). The sequence
  // number is used to detect lease changes between command proposal and
  // application without requiring that we send the entire lease through Raft.
  // Lease sequence numbers are a reflection of the "lease equivalency" property
  // (see Lease.Equivalent). Two adjacent leases that are equivalent will have
  // the same sequence number and two adjacent leases that are not equivalent
  // will have different sequence numbers.
  int64 sequence = 7 [(gogoproto.casttype) = "LeaseSequence"];
}

// AbortSpanEntry contains information about a transaction which has
// been aborted. It's written to a range's AbortSpan if the range
// may have contained intents of the aborted txn. In the event that
// the same transaction attempts to read keys it may have written
// previously, this entry informs the transaction that it has aborted
// and must start fresh with an updated priority.
message AbortSpanEntry {
  option (gogoproto.equal) = true;
  option (gogoproto.populate) = true;

  // The key of the associated transaction.
  bytes key = 1 [(gogoproto.casttype) = "Key"];
  // The candidate commit timestamp the transaction record held at the time
  // it was aborted.
  util.hlc.Timestamp timestamp = 2 [(gogoproto.nullable) = false];
  // The priority of the transaction.
  int32 priority = 3;
}

// TxnCoordMeta is metadata held by a transaction coordinator. This
// message is defined here because it is used in several layers of the
// system (internal/client, sql/distsqlrun, kv).
message TxnCoordMeta {
  // txn is a copy of the transaction record, updated with each request.
  Transaction txn = 1 [(gogoproto.nullable) = false];
  // intents stores key spans affected by this transaction through
  // this coordinator. These spans allow the coordinator to set the
  // list of intent spans in the EndTransactionRequest when the
  // transaction is finalized.
  repeated Span intents = 2 [(gogoproto.nullable) = false];
  // command_count indicates how many requests have been sent through
  // this transaction. Reset on retryable txn errors.
  int32 command_count = 3;
  // refresh_reads and refresh_writes store key spans which were read
  // or, less frequently, written during a transaction. These fields
  // are utilized for SERIALIZABLE transactions in the event a
  // transaction experiences a retry error. In that case, the
  // coordinator uses the Refresh and RefreshRange RPCs to verify that
  // no write has occurred to the spans more recently than the txn's
  // original timestamp, and updates the affected timestamp caches to
  // the transaction's refreshed timestamp. On failure, the retry
  // error is propagated. On success, the transaction's original and
  // current timestamps are forwarded to the refresh timestamp, and
  // the transaction can continue.
  repeated Span refresh_reads = 4 [(gogoproto.nullable) = false];
  repeated Span refresh_writes = 5 [(gogoproto.nullable) = false];
  // refresh_invalid indicates that spans were discarded or not collected
  // (i.e. because of a dist SQL processor running a version before refreshing
  // was introduced). This is false if all spans encountered during the
  // transaction which need refreshing have been collected to the refresh_reads
  // and refresh_writes span slices.
  bool refresh_invalid = 7;
  // deprecated_refresh_valid is the inverse of refresh_invalid. It was
  // deprecated in favor of refresh_invalid in order to give the struct a useful
  // zero value.
  // TODO(nvanbenschoten): Can be removed in 2.2.
  bool deprecated_refresh_valid = 6;
  // outstanding_writes stores all writes that are outstanding and have
  // not yet been resolved. Any client wishing to send a request that
  // overlaps with them must chain on to their success using a QueryIntent
  // request.
  repeated SequencedWrite outstanding_writes = 8 [(gogoproto.nullable) = false];
}