diff --git a/src/sdr/SoapySDRThread.cpp b/src/sdr/SoapySDRThread.cpp index 429b2306..c6abd9a5 100644 --- a/src/sdr/SoapySDRThread.cpp +++ b/src/sdr/SoapySDRThread.cpp @@ -87,6 +87,7 @@ bool SDRThread::init() { std::string streamExceptionStr(""); + //1. setup stream for CF32: try { stream = device->setupStream(SOAPY_SDR_RX,"CF32", std::vector(), currentStreamArgs); } catch(exception e) { @@ -98,23 +99,17 @@ bool SDRThread::init() { std::cout << "Stream setup failed, stream is null. " << streamExceptionStr << std::endl; return false; } - - int streamMTU = device->getStreamMTU(stream); - mtuElems.store(streamMTU); - + + //2. Set sample rate: + device->setSampleRate(SOAPY_SDR_RX, 0, sampleRate.load()); + + //3. Store Stream-specific parameters to current Device deviceInfo.load()->setStreamArgs(currentStreamArgs); deviceConfig.load()->setStreamOpts(currentStreamArgs); - - wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Activating stream.")); - device->setSampleRate(SOAPY_SDR_RX,0,sampleRate.load()); - - // TODO: explore bandwidth setting option to see if this is necessary for others - if (device->getDriverKey() == "bladeRF") { - device->setBandwidth(SOAPY_SDR_RX, 0, sampleRate.load()); - } - + + //4. Apply other settings: Frequency, PPM correction, Gains, Device-specific settings: device->setFrequency(SOAPY_SDR_RX,0,"RF",frequency - offset.load()); - device->activateStream(stream); + if (devInfo->hasCORR(SOAPY_SDR_RX, 0)) { hasPPM.store(true); device->setFrequency(SOAPY_SDR_RX,0,"CORR",ppm.load()); @@ -133,28 +128,12 @@ bool SDRThread::init() { device->setGainMode(SOAPY_SDR_RX, 0, agc_mode.load()); } - numChannels.store(getOptimalChannelCount(sampleRate.load())); - numElems.store(getOptimalElementCount(sampleRate.load(), TARGET_DISPLAY_FPS)); - - //fallback if mtuElems was wrong - if (!mtuElems.load()) { - mtuElems.store(numElems.load()); - std::cout << "SDRThread::init(): Device Stream MTU is broken, use " << mtuElems.load() << "instead..." << std::endl << std::flush; - } else { - std::cout << "SDRThread::init(): Device Stream set to MTU: " << mtuElems.load() << std::endl << std::flush; - } - - overflowBuffer.data.resize(mtuElems.load()); - - buffs[0] = malloc(mtuElems.load() * 4 * sizeof(float)); - numOverflow = 0; - SoapySDR::ArgInfoList settingsInfo = device->getSettingInfo(); SoapySDR::ArgInfoList::const_iterator settings_i; if (!setting_value_changed.load()) { - settings.erase(settings.begin(), settings.end()); - settingChanged.erase(settingChanged.begin(), settingChanged.end()); + settings.clear(); + settingChanged.clear(); } //apply settings. @@ -174,11 +153,15 @@ bool SDRThread::init() { setting_value_changed.store(false); } //leave lock guard scope - - updateSettings(); - + wxGetApp().sdrThreadNotify(SDRThread::SDR_THREAD_INITIALIZED, std::string("Device Initialized.")); - + + //5. Activate stream: (through update settings) + wxGetApp().sdrEnumThreadNotify(SDREnumerator::SDR_ENUM_MESSAGE, std::string("Activating stream.")); + + rate_changed.store(true); + updateSettings(); + //rebuild menu now that settings are really been applied. wxGetApp().notifyMainUIOfDeviceChange(true); @@ -188,7 +171,13 @@ bool SDRThread::init() { void SDRThread::deinit() { device->deactivateStream(stream); device->closeStream(stream); - free(buffs[0]); + + if (buffs[0] != nullptr) { + ::free(buffs[0]); + buffs[0] = nullptr; + } + + stream = nullptr; } void SDRThread::assureBufferMinSize(SDRThreadIQData * dataOut, size_t minSize) { @@ -413,11 +402,12 @@ void SDRThread::readLoop() { void SDRThread::updateGains() { SDRDeviceInfo *devInfo = deviceInfo.load(); - gainValues.erase(gainValues.begin(),gainValues.end()); - gainChanged.erase(gainChanged.begin(),gainChanged.end()); + gainValues.clear(); + gainChanged.clear(); SDRRangeMap gains = devInfo->getGains(SOAPY_SDR_RX, 0); for (SDRRangeMap::iterator gi = gains.begin(); gi != gains.end(); gi++) { + gainValues[gi->first] = device->getGain(SOAPY_SDR_RX, 0, gi->first); gainChanged[gi->first] = false; } @@ -448,39 +438,49 @@ void SDRThread::updateSettings() { } if (rate_changed.load()) { - device->setSampleRate(SOAPY_SDR_RX,0,sampleRate.load()); + + //1. Silence the device: + device->deactivateStream(stream); + + //2. Set the (new) sample rate + device->setSampleRate(SOAPY_SDR_RX, 0, sampleRate.load()); + + //2.2 Device-specific workarounds: // TODO: explore bandwidth setting option to see if this is necessary for others if (device->getDriverKey() == "bladeRF") { device->setBandwidth(SOAPY_SDR_RX, 0, sampleRate.load()); } - // Fix for LimeSDR-USB not properly handling samplerate changes while device is - // active. - else if (device->getHardwareKey() == "LimeSDR-USB") { - std::cout << "SDRThread::updateSettings(): Force deactivate / activate limeSDR stream" << std::endl << std::flush; - device->deactivateStream(stream); - device->activateStream(stream); - } - sampleRate.store(device->getSampleRate(SOAPY_SDR_RX,0)); + + //3. Re-activate stream: + device->activateStream(stream); + + //4. Re-do Cubic buffers : + //re-read current sample rate and MTU: + sampleRate.store(device->getSampleRate(SOAPY_SDR_RX, 0)); + numChannels.store(getOptimalChannelCount(sampleRate.load())); numElems.store(getOptimalElementCount(sampleRate.load(), TARGET_DISPLAY_FPS)); + //read (new) MTU size: int streamMTU = device->getStreamMTU(stream); - mtuElems.store(streamMTU); - + //fallback if mtuElems was wrong if (!mtuElems.load()) { mtuElems.store(numElems.load()); - std::cout << "SDRThread::updateSettings(): Device Stream MTU is broken, use " << mtuElems.load() << "instead..." << std::endl << std::flush; + std::cout << "SDRThread: Device Stream MTU is broken, use " << mtuElems.load() << " instead..." << std::endl << std::flush; } else { - std::cout << "SDRThread::updateSettings(): Device Stream changing to MTU: " << mtuElems.load() << std::endl << std::flush; + std::cout << "SDRThread : Device Stream set to MTU: " << mtuElems.load() << std::endl << std::flush; } overflowBuffer.data.resize(mtuElems.load()); - free(buffs[0]); - buffs[0] = malloc(mtuElems.load() * 4 * sizeof(float)); + if (buffs[0] != nullptr) { + ::free(buffs[0]); + } + buffs[0] = ::malloc(mtuElems.load() * 4 * sizeof(float)); //clear overflow buffer numOverflow = 0; + // rate_changed.store(false); doUpdate = true; } @@ -499,11 +499,7 @@ void SDRThread::updateSettings() { } freq_changed.store(false); } - -// double devFreq = device->getFrequency(SOAPY_SDR_RX,0); -// if (((long long)devFreq + offset.load()) != frequency.load()) { -// wxGetApp().setFrequency((long long)devFreq + offset.load()); -// } + if (agc_mode_changed.load()) { if (device->hasGainMode(SOAPY_SDR_RX, 0)) { diff --git a/src/sdr/SoapySDRThread.h b/src/sdr/SoapySDRThread.h index c72c5a9d..b767c8a2 100644 --- a/src/sdr/SoapySDRThread.h +++ b/src/sdr/SoapySDRThread.h @@ -106,9 +106,9 @@ class SDRThread : public IOThread { void updateSettings(); SoapySDR::Kwargs combineArgs(SoapySDR::Kwargs a, SoapySDR::Kwargs b); - SoapySDR::Stream *stream; + SoapySDR::Stream *stream = nullptr; SoapySDR::Device *device; - void *buffs[1]; + void *buffs[1] = { nullptr }; ReBuffer buffers; SDRThreadIQData overflowBuffer; int numOverflow;