From e1d80f48474c8307659597829085cc7da708a609 Mon Sep 17 00:00:00 2001 From: Yusuke Ogawa Date: Mon, 18 Nov 2024 17:44:36 +0900 Subject: [PATCH] Update 6-2. VPN setting.md --- User_Guide/English/6-2. VPN setting.md | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/User_Guide/English/6-2. VPN setting.md b/User_Guide/English/6-2. VPN setting.md index ece695a..4ab3601 100644 --- a/User_Guide/English/6-2. VPN setting.md +++ b/User_Guide/English/6-2. VPN setting.md @@ -1,6 +1,7 @@ ## What you can do with this procedure. **Update the [L3 Table] sheet in the device file and configure the VPN.** -![image](https://github.com/cisco-open/network-sketcher/assets/13013736/7b41d85f-ceec-4486-a163-69844fdd15f8) +![image](https://github.com/user-attachments/assets/65ed35ef-b380-4995-b47a-c81ad0725fa3) + ## Procedure @@ -22,17 +23,24 @@ - If you want to set up multiple opposing VPNs at the end of one VPN, separate them with a comma ",". ![image](https://github.com/cisco-open/network-sketcher/assets/13013736/a9294e63-4774-4282-b3db-6ccb46c16356) + - [Add ver 2.3.2] If you want to reflect VPNs as segments in the Layer 3 configuration diagram, please create both Source IFs and Target IFs in the [L2 Table] sheet with Loopback (L3) in advance.
+ [4-5.Loopback Interface Configuration.pdf](https://github.com/cisco-open/network-sketcher/blob/main/User_Guide/English/4-5.Loopback%20Interface%20Configuration.pdf) + + ![image](https://github.com/user-attachments/assets/9eed6773-ebd5-4ada-ba0c-d2f613004353) + Configure VPN settings between the Loopbacks (L3) created in the [L2 Table] sheet. + ![image](https://github.com/user-attachments/assets/d23ddf68-230c-4fec-a8c6-174ce018165b) + 1.**Synchronize updated information** 1. Drag and drop the updated L device file to the Main Panel. 1. The Device Panel appears. Drag and drop the master file to be updated to [Update to the Master file]. 1. The master file is updated. The master file is updated, and the master file before the update is backed up. ![image](https://github.com/cisco-open/network-sketcher/assets/13013736/994c0f03-fe4b-47ff-ac7e-728e60040021) - 1. **Check VPN Diagram** 1. Refer to ["6-1. Generation of VPN Diagram"](https://github.com/cisco-open/network-sketcher/blob/main/User_Guide/English/6-1.%20Generation%20of%20VPN%20Diagram%20.md) to generate an L3 configuration diagram and confirm that the changes have been reflected. - ![image](https://github.com/cisco-open/network-sketcher/assets/13013736/6f584576-592a-46f0-b302-6a215aea3942) + ![image](https://github.com/user-attachments/assets/53c390d6-05d2-4ddd-8a5c-a7bf166bdbc6) +