This directory holds the translations for the core of Git. This document describes how you can contribute to the effort of enhancing the language coverage and maintaining the translation.
The localization (l10n) coordinator, Jiang Xin worldhello.net@gmail.com, coordinates our localization effort in the l10n coordinator repository:
https://github.com/git-l10n/git-po/
We will use XX as an alias to refer to the language translation code in the following paragraphs, for example we use "po/XX.po" to refer to the translation file for a specific language. But this doesn't mean that the language code has only two letters. The language code can be in one of two forms: "ll" or "ll_CC". Here "ll" is the ISO 639 two-letter language code and "CC" is the ISO 3166 two-letter code for country names and subdivisions. For example: "de" for German language code, "zh_CN" for Simplified Chinese language code.
As a contributor for a language XX, you should first check TEAMS file in this directory to see whether a dedicated repository for your language XX exists. Fork the dedicated repository and start to work if it exists.
Sometime, contributors may find that the translations of their Git distributions are quite different with the translations of the corresponding version from Git official. This is because some Git distributions (such as from Ubuntu, etc.) have their own l10n workflow. For this case, wrong translations should be reported and fixed through their workflows.
If you are the first contributor for the language XX, please fork this repository, prepare and/or update the translated message file "po/XX.po" (described later), and ask the l10n coordinator to pull your work.
If there are multiple contributors for the same language, please first coordinate among yourselves and nominate the team leader for your language, so that the l10n coordinator only needs to interact with one person per language.
The overall data-flow looks like this:
+-------------------+ +------------------+
| Git source code | ----(2)---> | L10n coordinator |
| repository | <---(5)---- | repository |
+-------------------+ +------------------+
| | ^
(1) (3) (4)
V v |
+----------------------------------+
| Language Team XX |
+----------------------------------+
-
Translatable strings are marked in the source file.
-
Language teams can start translation iterations at any time, even before the l10n window opens:
- Pull from the master branch of the source (1)
- Update the message file by running "make po-update PO_FILE=po/XX.po"
- Translate the message file "po/XX.po"
-
The L10n coordinator pulls from source and announces the l10n window open (2)
-
Language team pulls from the l10n coordinator, starts another translation iteration against the l10n coordinator's tree (3)
- Run "git pull --rebase" from the l10n coordinator
- Update the message file by running "make po-update PO_FILE=po/XX.po"
- Translate the message file "po/XX.po"
- Squash trivial l10n git commits using "git rebase -i"
-
Language team sends pull request to the l10n coordinator (4)
-
L10n coordinator checks and merges
-
L10n coordinator asks the result to be pulled (5).
POT files are templates for l10n contributors to create or update their translation files. We used to have the "po/git.pot" file which was generated by the l10n coordinator, but this file had been removed from the tree.
The two POT files "po/git.pot" and "po/git-core.pot" can be created dynamically when necessary.
L10n contributors use "po/git.pot" to prepare translations for their languages, but they are not expected to modify it. The "po/git.pot" file can be generated manually with the following command:
make po/git.pot
The "po/git-core.pot" file is the template for core translations. A core translation is the minimum set of work necessary to complete a translation of a new language. Since there are more than 5000 messages in the full set of template message file "po/git.pot" that need to be translated, this is not a piece of cake for new language contributors.
The "core" template file "po/git-core.pot" can be generated manually by running:
make po/git-core.pot
(This is done by the language teams).
If your language XX does not have translated message file "po/XX.po" yet, you add a translation for the first time by running:
make po-init PO_FILE=po/XX.po
where XX is the locale, e.g. "de", "is", "pt_BR", "zh_CN", etc.
The newly generated message file "po/XX.po" is based on the core pot file "po/git-core.pot", so it contains only a minimal set of messages and it's a good start for a new language contribution.
Once you are done testing the translation (see below), commit the result and ask the l10n coordinator to pull from you.
(This is done by the language teams).
If you are replacing translation strings in an existing "XX.po" file to improve the translation, just edit the file.
If you want to find new translatable strings in source files of upstream repository and propagate them to your "po/XX.po", run command:
make po-update PO_FILE=po/XX.po
It will:
- Call "make po/git.pot" to generate new "po/git.pot" file
- Call "msgmerge --add-location --backup=off -U po/XX.po po/git.pot" to update your "po/XX.po"
- The "--add-location" option for msgmerge will add location lines, and these location lines will help translation tools to locate translation context easily.
Once you are done testing the translation (see below), it's better to commit a location-less "po/XX.po" file to save repository space and make a user-friendly patch for review.
To save a location-less "po/XX.po" automatically in repository, you can:
First define a new attribute for "po/XX.po" by appending the following line in ".git/info/attributes":
/po/XX.po filter=gettext-no-location
Then define the driver for the "gettext-no-location" clean filter to strip out both filenames and locations from the contents as follows:
git config --global filter.gettext-no-location.clean \
"msgcat --no-location -"
For users who have gettext version 0.20 or higher, it is also possible to define a clean filter to preserve filenames but not locations:
git config --global filter.gettext-no-location.clean \
"msgcat --add-location=file -"
You're now ready to ask the l10n coordinator to pull from you.
Fuzzy translation is a translation marked by comment "fuzzy" to let you know that the translation is out of date because the "msgid" has been changed. A fuzzy translation will be ignored when compiling using "msgfmt". Fuzzy translation can be marked by hands, but for most cases they are marked automatically when running "msgmerge" to update your "XX.po" file.
After fixing the corresponding translation, you must remove the "fuzzy" tag in the comment.
(This is done by the language teams, after creating or updating "XX.po" file).
Before you submit your changes go back to the top-level and do:
make
On systems with GNU gettext (i.e. not Solaris) this will compile your
changed PO file with msgfmt --check
, the --check option flags many
common errors, e.g. missing printf format strings, or translated
messages that deviate from the originals in whether they begin/end
with a newline or not.
L10n coordinator will check your contributions using a helper program (see "PO helper" section below):
git-po-helper check-po po/XX.po
git-po-helper check-commits <rev-list-opts>
(This is done by the core developers).
Before strings can be translated they first have to be marked for translation.
Git uses an internationalization interface that wraps the system's
gettext library, so most of the advice in your gettext documentation
(on GNU systems info gettext
in a terminal) applies.
General advice:
-
Don't mark everything for translation, only strings which will be read by humans (the porcelain interface) should be translated.
The output from Git's plumbing utilities will primarily be read by programs and would break scripts under non-C locales if it was translated. Plumbing strings should not be translated, since they're part of Git's API.
-
Adjust the strings so that they're easy to translate. Most of the advice in
info '(gettext)Preparing Strings'
applies here. -
Strings referencing numbers of items may need to be split into singular and plural forms; see the Q_() wrapper in the C sub-section below for an example.
-
If something is unclear or ambiguous you can use a "TRANSLATORS" comment to tell the translators what to make of it. These will be extracted by xgettext(1) and put in the "po/*.po" files, e.g. from git-am.sh:
# TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a] # in your translation. The program will only accept English # input at this point. gettext "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all "
Or in C, from builtin/revert.c:
/* TRANSLATORS: %s will be "revert" or "cherry-pick" */ die(_("%s: Unable to write new index file"), action_name(opts));
We provide wrappers for C, Shell and Perl programs. Here's how they're used:
Include builtin.h at the top, it'll pull in gettext.h, which defines the gettext interface. Consult with the list if you need to use gettext.h directly.
The C interface is a subset of the normal GNU gettext interface. We currently export these functions:
-
_()
Mark and translate a string. E.g.:
printf(_("HEAD is now at %s"), hex);
-
Q_()
Mark and translate a plural string. E.g.:
printf(Q_("%d commit", "%d commits", number_of_commits));
This is just a wrapper for the ngettext() function.
-
N_()
A no-op pass-through macro for marking strings inside static initializations, e.g.:
static const char *reset_type_names[] = { N_("mixed"), N_("soft"), N_("hard"), N_("merge"), N_("keep"), NULL };
And then, later:
die(_("%s reset is not allowed in a bare repository"), _(reset_type_names[reset_type]));
Here
_()
couldn't have statically determined what the translation string will be, but since it was already marked for translation withN_()
the look-up in the message catalog will succeed.
The Git gettext shell interface is just a wrapper for gettext.sh. Import it right after git-sh-setup like this:
. git-sh-setup
. git-sh-i18n
And then use the gettext
or eval_gettext
functions:
# For constant interface messages:
gettext "A message for the user"; echo
# To interpolate variables:
details="oh noes"
eval_gettext "An error occurred: \$details"; echo
In addition we have wrappers for messages that end with a trailing newline. I.e. you could write the above as:
# For constant interface messages:
gettextln "A message for the user"
# To interpolate variables:
details="oh noes"
eval_gettextln "An error occurred: \$details"
More documentation about the interface is available in the GNU info
page: info '(gettext)sh'
. Looking at git-am.sh (the first shell
command to be translated) for examples is also useful:
git log --reverse -p --grep=i18n git-am.sh
The Git::I18N module provides a limited subset of the Locale::Messages functionality, e.g.:
use Git::I18N;
print __("Welcome to Git!\n");
printf __("The following error occurred: %s\n"), $error;
Run perldoc perl/Git/I18N.pm
for more info.
Git's tests are run under LANG=C LC_ALL=C
. So the tests do not need be
changed to account for translations as they're added.
To make the maintenance of "XX.po" easier, the l10n coordinator and l10n team leaders can use a helper program named "git-po-helper". It is a wrapper to gettext suite, specifically written for the purpose of Git l10n workflow.
To build and install the helper program from source, see git-po-helper/README.
There are some conventions that l10n contributors must follow:
-
The subject of each l10n commit should be prefixed with "l10n: ".
-
Do not use non-ASCII characters in the subject of a commit.
-
The length of commit subject (first line of the commit log) should be less than 50 characters, and the length of other lines of the commit log should be no more than 72 characters.
-
Add "Signed-off-by" trailer to your commit log, like other commits in Git. You can automatically add the trailer by committing with the following command:
git commit -s
-
Check syntax with "msgfmt" or the following command before creating your commit:
git-po-helper check-po <XX.po>
-
Squash trivial commits to make history clear.
-
DO NOT edit files outside "po/" directory.
-
Other subsystems ("git-gui", "gitk", and Git itself) have their own workflow. See Documentation/SubmittingPatches for instructions on how to contribute patches to these subsystems.
To contribute for a new l10n language, contributor should follow additional conventions:
-
Initialize proper filename of the "XX.po" file conforming to iso-639 and iso-3166.
-
Must complete a minimal translation based on the "Core translation". See that section above.
-
Add a new entry in the "po/TEAMS" file with proper format, and check the syntax of "po/TEAMS" by running the following command:
git-po-helper team --check