Skip to content

Latest commit

 

History

History
 
 

style

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
uber
uber
 
 
README.md
README.md
 
 
prototool.yaml
prototool.yaml
 
 

README.md

Uber Protobuf Style Guide V2

This is the V2 of the Uber Protobuf Style Guide.

See the uber directory for an example of all concepts explained in this Style Guide.

V1 versus V2 Style Guides

The V2 Style Guide contains 39 new lint rules compared to our V1 Style Guide that represent lessons we have learned in our API development. The rules within this Style Guide will help you write clean, consistent, and maintainable APIs. We recommend following the V2 Style Guide instead of the V1 Style Guide - once you understand the rules described below, and are used to developing with them, it becomes simple to follow.

However, for backwards-compatibility reasons, the V1 Style Guide is the default style guide enforced by Prototool if no lint group configuration is present. To use the V2 Style Guide with Prototool, set the following in your prototool.yaml.

lint:
  group: uber2

The V2 Style Guide is almost entirely a superset of the V1 Style Guide. There are only two items that are incompatible.

  • Nested enum value names do not need to have their message type as part of their prefix.
  • The go_package file option is now suffixed by the package version and not pb.

We call out these differences below. Even if you are primarily using the V1 Style Guide, we still recommend you follow the remainder of the rules in the V2 Style Guide, although they will not be enforced by Prototool unless the uber2 lint group is set.

⬆ Back to top

Spacing

Use two spaces instead of tabs. There are many schools of thought here, this is the one we chose.

⬆ Back to top

Package Naming

Some conventions:

  • A package name is a full package name, i.e. uber.trip.v1.
  • A package sub-name is a part of a package name, ie uber, trip, or v1.
  • A package version is the last package sub-name that specifies the version, i.e. v1, v1beta1, or v2.

Package sub-names should be short and descriptive, and can use abbreviations if necessary. Package sub-names should only include characters in the range [a-z0-9], i.e always lowercase and with only letter and digit characters. If names get too long or have underscores, the generated stubs in certain languages are less than idiomatic.

As illustrative examples, the following are not acceptable package names.

// Examples of bad package names.

// Note that specifying multiple packages is not valid Protobuf, however
// we do this here for brevity.

// The package sub-name credit_card_analysis is not short, and contains underscores.
package uber.finance.credit_card_analysis.v1;
// The package sub-name creditcardanalysisprocessing is longer than desired.
package uber.finance.creditcardanalysisprocessing.v1;

The following are acceptable package names.

// Each package sub-name is short and to the point.
package uber.trip.v1;
// Grouping by finance and then payment is acceptable.
package uber.finance.payment.v1;
// Ccap is for credit card analysis processing.
package uber.finance.ccap.v1;

Package sub-names cannot be any of the following.

  • internal - This is effectively a reserved keyword in Golang and results in the generated package not being accessible outside of it's context.
  • public - This is a reserved keyword in many languages.
  • private - This is a reserved keyword in many languages.
  • protected - This is a reserved keyword in many languages.
  • std - While not a reserved keyword in C++, this results in generated C++ stubs that do not compile.

⬆ Back to top

Package Versioning

The last package sub-name should be a major version of the package, or the major version followed by the beta version, specified as vMAJOR or vMAJORbetaBETA, where MAJOR and BETA are both greater than 0. The following are examples of acceptable package names.

package uber.trip.v1beta1;
package uber.trip.v1beta2;
package uber.trip.v1;
package uber.trip.v2beta1;
package uber.trip.v2;
package something.v2;

As illustrative examples, the following are not acceptable package names.

// No version.
package uber.trip;
// Major version is not greater than 0.
package uber.trip.v0;
// Beta version is not greater than 0.
package uber.trip.v1beta0;

Packages with only a major version are considered stable packages, and packages with a major and beta version are considered beta packages.

Breaking changes should never be made in stable packages, and stable packages should never depend on beta packages. Both wire-incompatible and source-code-incompatible changes are considered breaking changes. The following are the list of changes currently understood to be breaking.

  • Deleting or renaming a package.
  • Deleting or renaming an enum, enum value, message, message field, service, or service method.
  • Changing the type of a message field.
  • Changing the tag of a message field.
  • Changing the label of a message field, i.e. optional, repeated, required.
  • Moving a message field currently in a oneof out of the oneof.
  • Moving a message field currently not in a oneof into the oneof.
  • Changing the function signature of a method.
  • Changing the stream value of a method request or response.

Beta packages should be used with extreme caution, and are not recommended.

Instead of making a breaking change, rely on deprecation of types.

// Note that all enums, messages, services, and service methods require
// sentence comments, and each service must be in a separate file, as
// outlined below, however we omit this here for brevity.

enum Foo {
  option deprecated = true;
  FOO_INVALID = 0;
  FOO_ONE = 1;
}

enum Bar {
  BAR_INVALID = 0;
  BAR_ONE = 1 [deprecated = true];
  BAR_TWO = 2;
}

message Baz {
  option deprecated = true;
  int64 one = 1;
}

message Bat {
  int64 one = 1 [deprecated = true];
  int64 two = 2;
}

service BamAPI {
  option deprecated = true;
  rpc Hello(HelloRequest) returns (HelloResponse) {}
}

service BanAPI {
  rpc SayGoodbye(SayGoodbyeRequest) returns (SayGoodbyeResponse) {
    option deprecated = true;
  }
}

If you really want to make a breaking change, or just want to clean up a package, make a new version of the package by incrementing the major version and copy your definitions as necessary. For example, copy foo.bar.v1 to foo.bar.v2, and do any cleanups required. This is not a breaking change as foo.bar.v2 is a new package. Of course, you are responsible for the migration of your callers.

Prototool is able to detect breaking changes in your Protobuf definitions. See breaking.md for more details.

⬆ Back to top

Directory Structure

Files should be stored in a directory structure that matches their package sub-names. All files in a given directory should be in the same package.

The following is an example of this in practice.

.
└── uber
    ├── finance
    │   ├── ccap
    │   │   └── v1
    │   │       └── ccap.proto // package uber.finance.ccap.v1
    │   └── payment
    │       ├── v1
    │       │   └── payment.proto // package uber.payment.v1
    │       └── v1beta1
    │           └── payment.proto // package uber.payment.v1beta1
    └── trip
        ├── v1
        │   ├── trip_api.proto // package uber.trip.v1
        │   └── trip.proto // package uber.trip.v1
        └── v2
            ├── trip_api.proto // package uber.trip.v2
            └── trip.proto // package uber.trip.v2

⬆ Back to top

File Structure

Files should be named lower_snake_case.proto.

All files should be ordered in the following manner.

  1. License Header (if applicable)
  2. Syntax
  3. Package
  4. File options (alphabetized)
  5. Imports (alphabetized)
  6. Everything Else

Protobuf definitions should go into one of two types of files: Service files or Supporting files.

A service file contains exactly one service, and it's corresponding request and response messages. This file is named after the service, substituting PascalCase for lower_snake_case. The service should be the first element in the file, with requests and responses sorted to match the order of the declared service methods.

A supporting file contains everything else, i.e. enums, and messages that are not request or response messages. These files have no enforced naming structure or otherwise, however the general recommendation is that if you have less than 15 definitions, they should all go in a file named after the last non-version package sub-name. For example, for a package uber.trip.v1 with less than 15 non-service-related definitions, you would have a single supporting file uber/trip/v1/trip.proto. While there are arguments for and against the single file recommendation, this provides the easiest mechanism to normalize file structure across a repository of Protobuf files while making it simple for users to grok a Protobuf package without having to change between multiple files, each requiring many imports.

The following is an example of a supporting file with two definitions. Note that it is merely coincidence that the file is named trip.proto and it contains a definition Trip - there is no need to name files by a type or types contained within them, other than for services.

syntax = "proto3";

package uber.trip.v1;

option csharp_namespace = "Uber.Trip.V1";
option go_package = "tripv1";
option java_multiple_files = true;
option java_outer_classname = "TripProto";
option java_package = "com.uber.trip.v1";
option objc_class_prefix = "UTX";
option php_namespace = "Uber\\Trip\\V1";

import "uber/user/v1/user.proto";
import "google/protobuf/timestamp.proto";

// A trip taken by a rider.
message Trip {
  string id = 1;
  user.v1.User user = 2;
  google.protobuf.Timestamp start_time = 3;
  google.protobuf.Timestamp end_time = 4;
  repeated Waypoint waypoints = 5;
}

// A given waypoint.
message Waypoint {
  // In the real world, addresses would be normalized into
  // a PostalAddress message or such, but for brevity we simplify
  // this to a freeform string.
  string postal_address = 1;
  // The nickname of this waypoint, if any.
  string nickname = 2;
}

The following is an example of a service file named uber/trip/v1/trip_api.proto showing a service TripAPI with two service methods, and requests and responses ordered by method. Note that request and response messages do not require comments.

syntax = "proto3";

package uber.trip.v1;

option csharp_namespace = "Uber.Trip.V1";
option go_package = "tripv1";
option java_multiple_files = true;
option java_outer_classname = "TripApiProto";
option java_package = "com.uber.trip.v1";
option objc_class_prefix = "UTX";
option php_namespace = "Uber\\Trip\\V1";

import "uber/trip/v1/trip.proto";
import "google/protobuf/timestamp.proto";

// Handles interaction with trips.
service TripAPI {
  // Get the trip specified by the ID.
  rpc GetTrip(GetTripRequest) returns (GetTripResponse);
  // List the trips for the given user before a given time.
  //
  // If the start index is beyond the end of the available number
  // of trips, an empty list of trips will be returned.
  // If the start index plus the size is beyond the available number
  // of trips, only the number of available trips will be returned.
  rpc ListUserTrips(ListUserTripsRequest) returns (ListUserTripsResponse);
}

message GetTripRequest {
  string id = 1;
}

message GetTripResponse {
  Trip trip = 1;
}

message ListUserTripsRequest {
  string user_id = 1;
  google.protobuf.Timestamp before_time = 2;
  // The start index for pagination.
  uint64 start = 3;
  // The maximum number of trips to return.
  uint64 max_size = 4;
}

message ListUserTripsResponse {
  repeated Trip trips = 1;
  // True if more trips are available.
  bool next = 2;
}

⬆ Back to top

Syntax

The syntax for Protobuf files should always be proto3. It is acceptable to import proto2 files for legacy purposes, but new definitions should conform to the newer proto3 standard.

⬆ Back to top

File Options

File options should be alphabetized. All files should specify a given set of file options that largely conform to the Google Cloud APIs File Structure. Note that prototool create and prototool format --fix automate this for you, and this can be done as part of your generation pipeline, so there is no need to conform to this manually.

The following are the required file options for a given package uber.trip.v1 for a file named trip_api.proto.

syntax = "proto3";

package uber.trip.v1;

// The csharp_namespace should be the package name with each package sub-name capitalized.
option csharp_namespace = "Uber.Trip.V1";
// The go_package should be the last non-version package sub-name concatenated with the
// package version.
//
// Of special note: For the V1 Style Guide, this was the last package sub-name concatenated
// with "pb", so for a package "uber.trip", it would be "trippb", but since the V2 Style Guide
// requires package versions, we have changed "pb" to be the package version.
option go_package = "tripv1";
// The java_multiple_files option should always be true.
option java_multiple_files = true;
// The java_outer_classname should be the PascalCased file name, removing the "." for the
// extension.
option java_outer_classname = "TripApiProto";
// The java_package should be "com." plus the package name.
option java_package = "com.uber.trip.v1";
// The objc_class_prefix should be the uppercase first letter of each package sub-name,
// not including the package-version, with the following rules:
//   - If the resulting abbreviation is 2 characters, add "X".
//   - If the resulting abbreviation is 1 character, add "XX".
//   - If the resulting abbreviation is "GBP", change it to "GPX". "GBP" is reserved
//     by Google for the Protocol Buffers implementation.
option objc_class_prefix = "UTX";
// The php_namespace is the same as the csharp_namespace, with "\\" substituted for ".".
option php_namespace = "Uber\\Trip\\V1";

While it is unlikely that a given organization will use all of these file options for their generated stubs, this provides a universal mechanism for specifying these options that matches the Google Cloud APIs File Structure, and all of these file options are built in.

⬆ Back to top

Imports

Imports should be alphabetized.

Imports should all start from the same base directory for a given repository, usually the root of the repository. For local imports, this should match the package name, so if you have a file uber/trip/v1/trip.proto with package uber.trip.v1, you should import it as uber/trip/v1/trip.proto. For external imports, this should generally also be the root of the repository. For example, if importing googleapis definitions, you would import google/logging/v2/logging.proto, not logging/v2/logging.proto, v2/logging.proto, and such.

Imports should never be public or weak.

Note that the Well-Known Types should be used whenever possible, and imported starting with google/protobuf, for example google/protobuf/timestamp.proto. Prototool provides all of these out of the box for you.

.
└── google
    └── protobuf
        ├── any.proto
        ├── api.proto
        ├── compiler
        │   └── plugin.proto
        ├── descriptor.proto
        ├── duration.proto
        ├── empty.proto
        ├── field_mask.proto
        ├── source_context.proto
        ├── struct.proto
        ├── timestamp.proto
        ├── type.proto
        └── wrappers.proto

These are available for browsing at github.com/protocolbuffers/protobuf/src/google/protobuf and are also included in the include directory of each Protobuf Releases ZIP file.

⬆ Back to top

Reserved Keyword

Do not use the reserved keyword in messages or enums. Instead, rely on the deprecated option.

The following is an example of what not to do.

// A user.
message User {
  // Do not do this.
  reserved 2, 4;
  reserved "first_name", "middle_names"

  string id = 1;
  string last_name = 3;
  repeated string first_names = 4;
}

// The type of the trip.
enum TripType {
  // Do not do this.
  reserved 2;
  reserved "TRIP_TYPE_POOL";

  TRIP_TYPE_INVALID = 0;
  TRIP_TYPE_UBERX = 1;
  TRIP_TYPE_UBER_POOL = 3;
}

Instead, do the following.

// A user.
message User {
  string id = 1;
  string last_name = 3;
  repeated string first_names = 5;

  string first_name = 2 [deprecated = true];
  repeated string middle_names = 4 [deprecated = true];
}

// The type of the trip.
enum TripType {
  TRIP_TYPE_INVALID = 0;
  TRIP_TYPE_UBERX = 1;
  TRIP_TYPE_UBER_POOL = 3;

  TRIP_TYPE_POOL = 2 [deprecated = true];
}

By far the most important reason to use deprecated instead of reserved is that while not a wire breaking change, deleting a field or enum value is a source code breaking change. This will result in code that does not compile, which we take a strong stance against, including in Prototool's breaking change detector. Your API as a whole should not need semantic versioning - one of the core promises of Protobuf is forwards and backwards compatibility, and this should extend to your code as well. This is especially true if your Protobuf definitions are used across multiple repositories, and even if you have a single monorepo for your entire organization, any external customers who use your Protobuf definitions should not be broken either.

As of proto3, JSON is also a first-class citizen with respect to Protobuf, and JSON serialization of Protobuf types uses field names, not tags. This means that if you have JSON consumers, re-using the same field name is a breaking change. Therefore, when removing a field, if you ever use JSON or ever could use JSON, you must reserve both the tag and the field name, as done in the above bad example. If you have to reserve these, it is easier and cleaner to just deprecate the field.

⬆ Back to top

Enums

Enums should always be PascalCase. Enum values should be UPPER_SNAKE_CASE. The enum option allow_aliases should never be used.

All enums require a comment that contains at least one complete sentence. See the Documentation section for more details.

There are many cases when it's tempting to use a string or integer to represent a value that has a small, finite, and relatively static number of values. These values should almost always be represented as enums and not strings or integers. An enum value carries semantic meaning and there is no ability for incorrect values to be set.

⬆ Back to top

Enum Value Names

Enum values have strict naming requirements.

  1. All enum values must have the name of the enum prefixed to all values as UPPER_SNAKE_CASE.

For example, for an enum TripType, all values must be prefixed with TRIP_TYPE_.

// The type of the trip.
enum TripType {
  TRIP_TYPE_INVALID = 0;
  TRIP_TYPE_UBERX = 1;
  TRIP_TYPE_POOL = 2;
}

This is due to Protobuf enums using C++ scoping rules. This results in it not being possible to have two enums with the same value. For example, the following is not valid Protobuf, regardless of file structure.

syntax = "proto3";

package uber.trip.v1;

enum Foo {
  CAR = 0;
}

enum Bar {
  // Invalid! There is already a CAR enum value in uber.trip.v1.Foo.
  CAR = 0;
}

Compiling this file will result in the following errors from protoc.

uber/trip/v1/trip.proto:10:3:"CAR" is already defined in "uber.trip.v1".
uber/trip/v1/trip.proto:10:3:Note that enum values use C++ scoping rules, meaning that enum values
are siblings of their type, not children of it.  Therefore, "CAR" must be unique within
"uber.trip.v1", not just within "Bar".
  1. All enum values must have a 0 INVALID value.

For example, for an enum TripType, there must be TRIP_TYPE_INVALID = 0;.

  1. The invalid value carries no semantic meaning, and if a value can be purposefully unset, i.e. you think a value should be purposefully null over the wire, then there should be a UNSET value as the 1 value.

For example, for an enum TripType, you may add a value TRIP_TYPE_UNSET = 1;.

Protobuf (proto3 to be specific) does not expose the concept of set vs. unset integral fields (of which enums are), as a result it is possible to create a empty version of a message and accidentally create the impression that an enum value was set by the caller. This can lead to hard to find bugs where the default zero value is being set without the caller knowingly doing so. You may be thinking - but it is super useful to just be able to assume my default enum option, just like I want an integer field called count to default to 0 without setting it explicitly. However, Enum values are not integers, they are just represented as them in the Protobuf description. Take for example the following enum:

// This is not a valid example.
enum Shape {
    SHAPE_CIRCLE = 0;
    SHAPE_RECTANGLE = 1;
}

In this case a consumer of this Protobuf message might forget to set any Shape fields that exist, and as a result the default value of SHAPE_CIRCLE will be assumed. This is dangerous and creates hard to track down bugs.

Following similar logic to our INVALID case, we don't want information in messages to be implied, we want signal to be stated with intention. If you have a case where you want UNSET to be a semantic concept, then this value must be explicitly set. For example:

// The traffic light color.
enum TrafficLightColor {
    TRAFFIC_LIGHT_COLOR_INVALID = 0;
    TRAFFIC_LIGHT_COLOR_UNSET = 1;
    TRAFFIC_LIGHT_COLOR_GREEN = 2;
    TRAFFIC_LIGHT_COLOR_YELLOW = 3;
    TRAFFIC_LIGHT_COLOR_RED = 4;
}

It's tempting to use UNSET as a default value, but then again we risk the case of a user forgetting to set the value and it being interpreted as the intentional value UNSET. For consistency across our enums, if UNSET is a semantic value of your enum, it should have the value 1.

⬆ Back to top

Nested Enums

Nested enums are allowed, but strongly discouraged.

While allowed, a good general policy is to always use unnested enums.

Nested enums should not be referenced outside of their encapsulating message.

The following is valid but discouraged.

// A traffic light.
//
// Discouraged.
message TrafficLight {
  // A traffic light color.
  enum Color {
    COLOR_INVALID = 0;
    COLOR_UNSET = 1;
    COLOR_GREEN = 2;
    COLOR_YELLOW = 3;
    COLOR_RED = 4;
  }
  string id = 1;
  Color current_color = 2;
}

Note that the enum value prefix follows the same convention whether nested or unnested.

Of special note: For the V1 Style Guide, enums had their nesting types prefixed as well, so in the above example you would have had TRAFFIC_LIGHT_COLOR_INVALID. This was dropped for the V2 Style Guide.

While the above example is valid, you should not reference a TrafficLight.Color outside of the TrafficLight message as a matter of convention - if referencd outside of TrafficLight, the enum has meaning in other contexts, which means it should be top-level. If you need to reference an enum outside of a message, instead do the following.

// A traffic light color.
enum TrafficLightColor {
    TRAFFIC_LIGHT_COLOR_INVALID = 0;
    TRAFFIC_LIGHT_COLOR_UNSET = 1;
    TRAFFIC_LIGHT_COLOR_GREEN = 2;
    TRAFFIC_LIGHT_COLOR_YELLOW = 3;
    TRAFFIC_LIGHT_COLOR_RED = 4;
}

// A traffic light.
message TrafficLight {
  string id = 1;
  TrafficLightColor current_color = 2;
}

Only use nested enums when you are sure that for the lifetime of your API, the enum value will not be used outside of the message. In the above example, there could easily be situations where we want to reference TrafficLightColor in other messages in the future.

// Statistics on a traffic light color.
message TrafficLightColorStats {
  string traffic_light_id = 1;
  TrafficLightColor traffic_light_color = 2;
  google.protobuf.Timestamp last_active_time = 3;
  google.protobuf.Duration total_duration = 4;
}

In most cases, you cannot be sure that you will never want to use an enum in another message, and there is no cost to having an enum be unnested.

⬆ Back to top

Messages

Messages should always be PascalCase.

All messages require a comment that contains at least one complete sentence, with the exception of request and response messages as described in the Services section. See the Documentation section for more details.

Messages should be used to represent logical entities that have semantic meaning. They should not be used to group common fields that carry no meaning themselves.

The following is an example of what not to do.

// Do not do this.
message CommonFields {
  string id = 1;
  google.protobuf.Timestamp updated_time = 2;
}

// Do not do this.
message Vehicle {
  CommonFields common_fields = 1;
  string vin = 2;
}

// Do not do this.
message User {
  CommonFields common_fields = 1;
  string name = 2;
}

This is commonly done to simplify server-side implementations of Protobuf APIs. There are sometimes operations you want to do on request types that require a common set of fields, so it seems to make sense to group them as messages in your Protobuf schema.

You should optimize your Protobuf schema for the simplicity and semantic value of the API, not for for your server-side implementations. CommonFields has no semantic meaning - it's a pair of a couple fields that are part of messages that do have semantic meaning. A user of your API does not care that these fields are common, they only care what a Vehicle is, and what a User is. Thinking of this as JSON, the following has no meaning.

{
  "common_fields": {
    "id": "asdvasd",
    "updated_time": "timestamp",
  },
  "vin": "asdvasdv"
}

The key common_fields has no meaning, id and updated_time are fields of a vehicle. Therefore, the following is what you would want as a consumer of the API:

{
  "id": "asdvasd",
  "updated_time": "timestamp",
  "vin": "asdvasdv"
}

In our example, you would copy the fields between Vehicle and User.

// A vehicle.
message Vehicle {
  string id = 1;
  google.protobuf.Timestamp updated_time = 2;
  string vin = 3;
}

// A user.
message User {
  string id = 1;
  google.protobuf.Timestamp updated_time = 2;
  string name = 3;
}

Messages that will always contain a single field are strongly discouraged. Sometimes, it is tempting to use messages to confer type information.

// Do not do this.
message VehicleID {
  string value = 1;
}

The above is generally done because Protobuf happens to generate specific struct or class types in each language, and therefore have semantic meaning. However, this is not how Protobuf values are intended to be typed, and this can explode in a myriad of ways. To be consistent in our User example, we would need to do the following.

// Do not do this.
message UserID {
  string value = 1;
}

// Do not do this.
message Name {
  string value = 1;
}

// Do not do this.
message User {
  UserID id = 1;
  Name first_name = 2;
  Name last_name = 3;
  repeated Name middle_names = 4;
}

When taken further, this becomes nightmarish to work with both in terms of internal implementations, and from an API standpoint. The code in most languages will require so many Builders or struct initializations just to set single values that it becomes extremely tedious to iterate on an API. While less important, the JSON structure also explodes.

{
  "id": {
    "value": "sdfvsavassava"
  },
  "first_name": {
    "value": "John"
  },
  "last_name": {
    "value": "Smith"
  },
  "middle_names": [
    {
      "value": "Foo"
    },
    {
      "value": "Bar"
    }
  ]
}

As compared to:

{
  "id": "sdfvsavassava",
  "first_name": "John",
  "last_name": "Smith",
  "middle_names": [
    "Foo",
    "Bar"
  ]
}

If a message will always be a single value, prefer that single value for fields. You will thank us later.

⬆ Back to top

Message Fields

Message field names should always be lower_snake_case.

While there is no enforcement of this, we recommend that message field names match their type in lieu of a name that makes more sense. The following is an example of this pattern.

// A vehicle
message VehicleState {
  string vehicle_id = 1;
  // The field name matches the type PositionEstimate.
  PositionEstimate position_estimate = 2;
  // The field name is the plural of the type VehicleFeature.
  repeated VehicleFeature vehicle_features = 3;
  // The map is from key type to value type.
  map<string, Order> order_id_to_order = 4;
  // Timestamps are the exception, see below.
  google.protobuf.Timestamp time = 5;
}

The built-in message field option json_name should never be used.

The following additional naming rules apply.

  • Field names cannot contain descriptor. This causes a collision in Java-generated code.
  • Field names cannot contain file_name, instead using filename. This is just for consistency.
  • Field names cannot contain file_path, instead using filepath. This is just for consistency.
  • Fields of type google.protobuf.Timestamp should be named time or end in _time. For example, foo_time.
  • Fields of type google.protobuf.Duration should be named duration or end in _duration. For example, foo_duration.

⬆ Back to top

Oneofs

Oneof names should always be lower_snake_case.

⬆ Back to top

Nested Messages

Nested messages are allowed, but strongly discouraged.

While allowed, a good general policy is to always use unnested messages.

Nested messages should not be referenced outside of their encapsulating message.

The following is valid but discouraged.

// A Vehicle.
//
// Discouraged.
message Vehicle {
  // A vehicle type.
  message Type {
    // Should probably be an enum.
    string make = 1;
    string model = 2;
    uint32 year = 3;
  }
  string id = 1;
  Type type = 2;
}

While the above example is valid, you should not reference a Vehicle.Type outside of the Vehicle message as a matter of convention - if referencd outside of Vehicle, the message has meaning in other contexts, which means it should be top-level. If you need to reference a message outside of a message, instead do the following.

// A vehicle type.
message VehicleType {
  // Should probably be an enum.
  string make = 1;
  string model = 2;
  uint32 year = 3;
}

// A vehicle.
message Vehicle {
  string id = 1;
  VehicleType vehicle_type = 2;
}

Only use nested messages when you are sure that for the lifetime of your API, the message value will not be used outside of the message. In the above example, there could easily be situations where we want to reference VehicleType in other messages in the future.

// Statistics on a vehicle type.
message VehicleTypeStats {
  VehicleType vehicle_type = 1;
  uint64 number_made = 2;
}

In most cases, you cannot be sure that you will never want to use a message in another message, and there is no cost to having a message be unnested.

⬆ Back to top

Services/RPCs

Services should always be PascalCase. RPCs should always be PascalCase.

Services should always be suffixed with API. For example, TripAPI or UserAPI. This is for consistency.

All services and RPCs require a comment that contains at least one complete sentence. See the Documentation section for more details.

Please read the above File Structure section carefully. Each service should be in it's own file named after the service. For example, TripAPI should be in a file named trip_api.proto.

Every RPC request and response should be unique to the RPC, and named after the RPC. As per the File Structure section, the request and response messages should be in the same file as the service, underneath the service definition and in order of the RPCs defined in the service.

The unique request/response requirement is for compatibility as you iterate your RPC definitions. If one were to use the same request or response message for different RPCs, and then need to add or want to deprecate a field, each RPC that uses this request and response message would be affected, regardless of whether or not the new field applied to each RPC, or whether the deprecated field was deprecated for each RPC. While this pattern can cause some duplication, it's become the "gold standard" for Protobuf APIs.

The following is an example of such a pattern.

// Handles interaction with trips.
service TripAPI {
  // Get the trip specified by the ID.
  rpc GetTrip(GetTripRequest) returns (GetTripResponse);
  // List the trips for the given user before a given time.
  //
  // If the start index is beyond the end of the available number
  // of trips, an empty list of trips will be returned.
  // If the start index plus the size is beyond the available number
  // of trips, only the number of available trips will be returned.
  rpc ListUserTrips(ListUserTripsRequest) returns (ListUserTripsResponse);
}

message GetTripRequest {
  string id = 1;
}

message GetTripResponse {
  Trip trip = 1;
}

message ListUserTripsRequest {
  string user_id = 1;
  google.protobuf.Timestamp before_time = 2;
  // The start index for pagination.
  uint64 start = 3;
  // The maximum number of trips to return.
  uint64 max_size = 4;
}

message ListUserTripsResponse {
  repeated Trip trips = 1;
  // True if more trips are available.
  bool next = 2;
}

Note that request and response types do not need documentation comments, as opposed to all other messages.

⬆ Back to top

Streaming RPCs

Streaming RPCs are allowed, but strongly discouraged.

If you'd like to enforce this, add the following to your prototool.yaml.

lint:
  group: uber2
  rules:
    add:
      - RPCS_NO_STREAMING

Streaming RPCs seem enticing at first, but they push RPC framework concerns to the application level, which results in inconsistent implementations and behavior, which results in lower reliability. It is rare that a problem solved by streaming cannot be solved in a unary manner.

Spencer Nelson wrote a great summary of the issues with streaming RPCs in this GitHub Issue comment, which we paraphrase here:

Unary calls, while limiting, prevent many problems being created if you only give unary RPC capabilities to an inexperienced developer as part of your tool kit. While you can make mistakes in API design and message design, those mistakes stay local, they largely aren't architectural or infrastructural.

Streams are different. They imply expectations about how connection state is managed. Load balancing them is really hard, which means that a decision to use streams for an API has ramifications that ripple out to the infrastructure of a system.

How plausible is it that users trip on that pothole? Unfortunately, it is quite likely. Streaming is the sort of feature whose downsides can be hard to see at first. "Lower latency and the ability to push data to the client? Sign me up!" But people could easily reach for it too early in order to future-proof their APIs, "just in case we need streams later," and walk themselves into an architectural hole which is very difficult to get out of.

Most simple streaming RPCs can be implemented in terms of request-response RPCs, so long as they don't have extreme demands on latency or number of open connections (although HTTP/2 request multiplexing mostly resolves those issues anyway). Pagination and polling are the obvious tools here, but even algorithms like rsync are surprisingly straightforward to implement in a request/response fashion, and probably more efficient than you think if you're using HTTP/2, since the transport is streaming anyway.

Sometimes you really do need streams for your system, like if you are replicating a data stream. Nothing else is really going to work, there. But Protobuf APIs do not need to be all things for all use-cases. There is room for specialized solutions, but streams are a special thing, and they have resounding architectural impact.

⬆ Back to top

HTTP Annotations

HTTP annotations for use with libraries such as grpc-gateway are allowed, but strongly discouraged.

If you'd like to enforce this, add the following to your prototool.yaml.

lint:
  group: uber2
  rules:
    add:
      - RPC_OPTIONS_NO_GOOGLE_API_HTTP

HTTP annotations provide an alternative call path for RPCs that is not structured per the main Protobuf schema. One of the benefits of Protobuf is having this structure, and generated clients which properly call each endpoint.

⬆ Back to top

Naming

Some names are disallowed from all Protobuf types. The following names are not allowed to be part of any package, option, message, message field, enum, enum value, service, or RPC, with any capitalization.

  • common - Common has no semantic meaning. See the above discussions on not having common messages. Use a name that reflects the actual meaning of what you are representing instead.
  • data - The name "data" is a superfluous decorator. All Protobuf types are data. Use of "data" also causes singular vs plural issues during iteration, as the singluar of "data" is "datum". If you must have a type that needs such a decorator, use "info" instead.
  • uuid - We use "id" instead of "uuid" for purposes of consistency. An ID is meant to be a UUID unless otherwise specified.

⬆ Back to top

Documentation

All comments should use // and not /* */. This is for consistency.

Comments should never be inline, instead always being above the type.

// A foo. Note that "A Foo." is a complete sentence as we define it.
message Vehicle {
  // Comment here.
  string id = 1; // Do not do inline comments.
}

While not enforced, aim for a 120 character maximum length for comments.

You must document your messages, enums, services, and RPCs. These types require at least one complete sentence, represented as starting with a capital letter and ending with a period.

The following are some general recommendations.

Message Documentation

Description of message. Consider including:

  • Assumptions and requirements (e.g. "This polygon must have its points in a counter-clockwise order.").

Message Field Documentation

Description of field. Not required, but recommended. Consider including:

  • Assumptions and requirements.
  • What happens when the field is left blank. Does it default to a specific value or throw an invalid argument error?

Service Documentation

Explanation of what the service is intended to do/not do. Consider including:

  • Advantage or use cases.
  • Related services (mark with the @see annotation).

RPC Documentation

Explanation of what the RPC is intended to do/not do. Consider including:

  • Advantages or use cases (e.g."Useful when you want to send large volumes and don't care about latency.").
  • Side effects (e.g."If a feature with this ID already exists, this method will overwrite it.").
  • Performance considerations (e.g."Sending your data in chunks of X size is more efficient.").
  • Pre-requisites (e.g. "You must complete registration using the X method before calling this one.").
  • Post-requisites (e.g. "Clean up the registered resource after use to free up resources.").

⬆ Back to top