| Image | Name | Lot | Comments |
|---|---|---|---|
 |
bodyA.stl | x1 | |
 |
bodyB.stl | x1 | |
 |
spacer.stl | x4 | |
 |
leftBracket.stl | x2 | bracket in Freecad |
 |
rightBracket.stl | x2 | bracket in Freecad |
 |
legA.stl | x4 | |
 |
leftLegB.stl | x2 | legB in Freecad |
 |
rightLegB.stl | x2 | legB in Freecad |
 |
foot.stl | x4 |
| Image | Name | Lot | Comments |
|---|---|---|---|
 |
Turnigy TGY-306G-HV | x8 | Rebranded KST servos |
.jpg) |
Turnigy nano-tech 460mah 2S | x1 | |
| Control board | x1 | Controller of choice |
| Image | Name | Lot | Comments |
|---|---|---|---|
 |
M2 4mm Hex bolt | x4 | Included with servos |
 |
M2 6mm Hex bolt | x32 | |
 |
M3 8mm Hex bolt | x10 | |
 |
M3 30mm Hex bolt | x12 | |
 |
M3 nut | x4 | |
 |
M3 nyloc nut | x18 | |
 |
F693ZZ Bearings | x8 | They can be replaced by equivalent 3d printed bushings |
| Image | Name | Lot | Comments |
|---|---|---|---|
 |
Adhesive eyes | x2 | 12mm diameter recommended |