diff --git a/docker/faq/plex.md b/docker/faq/plex.md
index 0a55704..7cb4508 100644
--- a/docker/faq/plex.md
+++ b/docker/faq/plex.md
@@ -50,7 +50,7 @@
 
 **Q3.** How do I configure Plex to use my GPU for encoding/decoding (sometimes referred to as hardware transcoding)?
 
-**A3.** To enable GPU encoding/decoding within Plex you need to install the 'Nvidia Driver' Plugin and then configure the Plex container as follows:-
+**A3.1** NVIDIA: To enable GPU encoding/decoding within Plex you need to install the 'Nvidia Driver' Plugin and then configure the Plex container as follows:-
 
 1. Go to Community Applications in the unRAID web ui and search for Plugin 'Nvidia Driver' and install it, then reboot host.
 2. Go to unRAID web ui/Plugins/Nvidia Driver and make a note of the GPU device, it should look something like this:- ```GPU-02ff3633-4f22-c4d6-2c15-654ff33a321e```
@@ -61,8 +61,25 @@
 7. Go to variable named 'NVIDIA_VISIBLE_DEVICES' and set the value to the GPU device found in step 2.
 8. Start Plex container.
 
+**A3.2** Intel HD Graphics: To enable GPU encoding/decoding within Plex you need to install the 'Nvidia Driver' Plugin and then configure the Plex container as follows:-
+
+1. Go to Community Applications in the unRAID web ui and search for Plugin 'Intel GPU TOP' and install it, then reboot host.
+2. Go to unRAID web ui/Docker tab/left click Plex container and select 'edit'.
+3. Click on the toggle for 'advanced view'.
+4. Go to 'Extra Parameters:' and set it to ```--device='/dev/dri```
+5. Start Plex container.
+
 **Notes**<br/>
-It is possible that the variables mentioned above do not exist in your template, if this is the case then please create them by doing the following:-
+1) GPU-Selection: You may have to select the corresponding GPU inside your Plex server settings. 
+
+1. Go to unRAID web ui/Docker tab/left click Plex container and select 'WebGUI'.
+2. Inside the left menu under 'Settings', click on the menu entry 'Transcoder'.
+3. Scroll to the most-bottom.
+4. At 'Device for Hardware-Transcoding', activate the dropdown menu and select your GPU (e.g. ```HD Graphics 630```).
+
+If set to ```Auto```, it may primarily utilize your devices CPU instead of the GPU.
+
+2) Template Variables: It is possible that the variables mentioned above do not exist in your template, if this is the case then please create them by doing the following:-
 
 1. Go to unRAID web ui/Docker tab/left click Plex container and select 'edit'
 2. Click on the toggle for 'advanced view'