| Version: | 2.0 |
|---|---|
| Source: | https://github.com/mseknibilel/OpenStack-Grizzly-Install-Guide |
| Keywords: | Multi node, Grizzly, Quantum, Nova, Keystone, Glance, Horizon, Cinder, OpenVSwitch, KVM, Ubuntu Server 12.04/13.04 (64 bits). |
| Houssem Medhioub <[email protected]> | Djamal Zeghlache <[email protected]> |
| Sandeep Raman <[email protected]> | Sam Stoelinga <[email protected]> |
| Anil Vishnoi <[email protected]> | Gangur Hrushikesh <> |
Wana contribute ? Read the guide, send your contribution and get your name listed ;)
0. What is it? 1. Requirements 2. Controller Node 3. Network Node 4. Compute Node 5. Your first VM 6. Licensing 7. Contacts 8. Credits 9. To do
OpenStack Grizzly Install Guide is an easy and tested way to create your own OpenStack platform.
If you like it, don't forget to star it !
Status: Stable
| Node Role: | NICs |
|---|---|
| Control Node: | eth0 (10.10.10.51), eth1 (192.168.100.51) |
| Network Node: | eth0 (10.10.10.52), eth1 (10.20.20.52), eth2 (192.168.100.52) |
| Compute Node: | eth0 (10.10.10.53), eth1 (10.20.20.53) |
Note 1: Always use dpkg -s <packagename> to make sure you are using grizzly packages (version : 2013.1)
Note 2: This is my current network architecture, you can add as many compute node as you wish.
After you install Ubuntu 12.04 or 13.04 Server 64bits, Go in sudo mode and don't leave it until the end of this guide:
sudo su
Add Grizzly repositories [Only for Ubuntu 12.04]:
apt-get install -y ubuntu-cloud-keyring echo deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-updates/grizzly main >> /etc/apt/sources.list.d/grizzly.list
Update your system:
apt-get update -y apt-get upgrade -y apt-get dist-upgrade -y
Only one NIC should have an internet access:
#For Exposing OpenStack API over the internet auto eth1 iface eth1 inet static address 192.168.100.51 netmask 255.255.255.0 gateway 192.168.100.1 dns-nameservers 8.8.8.8 #Not internet connected(used for OpenStack management) auto eth0 iface eth0 inet static address 10.10.10.51 netmask 255.255.255.0
Restart the networking service:
service networking restart
Install MySQL:
apt-get install -y mysql-server python-mysqldb
Configure mysql to accept all incoming requests:
sed -i 's/127.0.0.1/0.0.0.0/g' /etc/mysql/my.cnf service mysql restart
Install RabbitMQ:
apt-get install -y rabbitmq-server
Install NTP service:
apt-get install -y ntp
Create these databases:
mysql -u root -p #Keystone CREATE DATABASE keystone; GRANT ALL ON keystone.* TO 'keystoneUser'@'%' IDENTIFIED BY 'keystonePass'; #Glance CREATE DATABASE glance; GRANT ALL ON glance.* TO 'glanceUser'@'%' IDENTIFIED BY 'glancePass'; #Quantum CREATE DATABASE quantum; GRANT ALL ON quantum.* TO 'quantumUser'@'%' IDENTIFIED BY 'quantumPass'; #Nova CREATE DATABASE nova; GRANT ALL ON nova.* TO 'novaUser'@'%' IDENTIFIED BY 'novaPass'; #Cinder CREATE DATABASE cinder; GRANT ALL ON cinder.* TO 'cinderUser'@'%' IDENTIFIED BY 'cinderPass'; quit;
Install other services:
apt-get install -y vlan bridge-utils
Enable IP_Forwarding:
sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf # To save you from rebooting, perform the following sysctl net.ipv4.ip_forward=1
Start by the keystone packages:
apt-get install -y keystone
Adapt the connection attribute in the /etc/keystone/keystone.conf to the new database:
connection = mysql://keystoneUser:[email protected]/keystone
Restart the identity service then synchronize the database:
service keystone restart keystone-manage db_sync
Fill up the keystone database using the two scripts available in the Scripts folder of this git repository:
#Modify the **HOST_IP** and **EXT_HOST_IP** variables before executing the scripts wget https://raw.github.com/mseknibilel/OpenStack-Grizzly-Install-Guide/OVS_MultiNode/KeystoneScripts/keystone_basic.sh wget https://raw.github.com/mseknibilel/OpenStack-Grizzly-Install-Guide/OVS_MultiNode/KeystoneScripts/keystone_endpoints_basic.sh chmod +x keystone_basic.sh chmod +x keystone_endpoints_basic.sh ./keystone_basic.sh ./keystone_endpoints_basic.sh
Create a simple credential file and load it so you won't be bothered later:
nano creds #Paste the following: export OS_TENANT_NAME=admin export OS_USERNAME=admin export OS_PASSWORD=admin_pass export OS_AUTH_URL="http://192.168.100.51:5000/v2.0/" # Load it: source creds
To test Keystone, we use a simple CLI command:
keystone user-list
We Move now to Glance installation:
apt-get install -y glance
Update /etc/glance/glance-api-paste.ini with:
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory delay_auth_decision = true auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = glance admin_password = service_pass
Update the /etc/glance/glance-registry-paste.ini with:
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = glance admin_password = service_pass
Update /etc/glance/glance-api.conf with:
sql_connection = mysql://glanceUser:[email protected]/glance
And:
[paste_deploy] flavor = keystone
Update the /etc/glance/glance-registry.conf with:
sql_connection = mysql://glanceUser:[email protected]/glance
And:
[paste_deploy] flavor = keystone
Restart the glance-api and glance-registry services:
service glance-api restart; service glance-registry restart
Synchronize the glance database:
glance-manage db_sync
To test Glance, upload the cirros cloud image directly from the internet:
glance image-create --name myFirstImage --is-public true --container-format bare --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.1/cirros-0.3.1-x86_64-disk.img
Now list the image to see what you have just uploaded:
glance image-list
Install the Quantum server and the OpenVSwitch package collection:
apt-get install -y quantum-server
Edit the OVS plugin configuration file /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini with:
#Under the database section [DATABASE] sql_connection = mysql://quantumUser:[email protected]/quantum #Under the OVS section [OVS] tenant_network_type = gre tunnel_id_ranges = 1:1000 enable_tunneling = True #Firewall driver for realizing quantum security group function [SECURITYGROUP] firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
Edit /etc/quantum/api-paste.ini
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = quantum admin_password = service_pass
Update the /etc/quantum/quantum.conf:
[keystone_authtoken] auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = quantum admin_password = service_pass signing_dir = /var/lib/quantum/keystone-signing
Restart the quantum server:
service quantum-server restart
Start by installing nova components:
apt-get install -y nova-api nova-cert novnc nova-consoleauth nova-scheduler nova-novncproxy nova-doc nova-conductor
Now modify authtoken section in the /etc/nova/api-paste.ini file to this:
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = nova admin_password = service_pass signing_dirname = /tmp/keystone-signing-nova # Workaround for https://bugs.launchpad.net/nova/+bug/1154809 auth_version = v2.0
Modify the /etc/nova/nova.conf like this:
[DEFAULT] logdir=/var/log/nova state_path=/var/lib/nova lock_path=/run/lock/nova verbose=True api_paste_config=/etc/nova/api-paste.ini compute_scheduler_driver=nova.scheduler.simple.SimpleScheduler rabbit_host=10.10.10.51 nova_url=http://10.10.10.51:8774/v1.1/ sql_connection=mysql://novaUser:[email protected]/nova root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf # Auth use_deprecated_auth=false auth_strategy=keystone # Imaging service glance_api_servers=10.10.10.51:9292 image_service=nova.image.glance.GlanceImageService # Vnc configuration novnc_enabled=true novncproxy_base_url=http://192.168.100.51:6080/vnc_auto.html novncproxy_port=6080 vncserver_proxyclient_address=10.10.10.51 vncserver_listen=0.0.0.0 # Network settings network_api_class=nova.network.quantumv2.api.API quantum_url=http://10.10.10.51:9696 quantum_auth_strategy=keystone quantum_admin_tenant_name=service quantum_admin_username=quantum quantum_admin_password=service_pass quantum_admin_auth_url=http://10.10.10.51:35357/v2.0 libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriver linuxnet_interface_driver=nova.network.linux_net.LinuxOVSInterfaceDriver #If you want Quantum + Nova Security groups firewall_driver=nova.virt.firewall.NoopFirewallDriver security_group_api=quantum #If you want Nova Security groups only, comment the two lines above and uncomment line -1-. #-1-firewall_driver=nova.virt.libvirt.firewall.IptablesFirewallDriver #Metadata service_quantum_metadata_proxy = True quantum_metadata_proxy_shared_secret = helloOpenStack # Compute # compute_driver=libvirt.LibvirtDriver # Cinder # volume_api_class=nova.volume.cinder.API osapi_volume_listen_port=5900
Synchronize your database:
nova-manage db sync
Restart nova-* services:
cd /etc/init.d/; for i in $( ls nova-* ); do sudo service $i restart; done
Check for the smiling faces on nova-* services to confirm your installation:
nova-manage service list
Install the required packages:
apt-get install -y cinder-api cinder-scheduler cinder-volume iscsitarget open-iscsi iscsitarget-dkms
Configure the iscsi services:
sed -i 's/false/true/g' /etc/default/iscsitarget
Restart the services:
service iscsitarget start service open-iscsi start
Configure /etc/cinder/api-paste.ini like the following:
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory service_protocol = http service_host = 192.168.100.51 service_port = 5000 auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = cinder admin_password = service_pass signing_dir = /var/lib/cinder
Edit the /etc/cinder/cinder.conf to:
[DEFAULT] rootwrap_config=/etc/cinder/rootwrap.conf sql_connection = mysql://cinderUser:[email protected]/cinder api_paste_config = /etc/cinder/api-paste.ini iscsi_helper=ietadm volume_name_template = volume-%s volume_group = cinder-volumes verbose = True auth_strategy = keystone iscsi_ip_address=10.10.10.51
Then, synchronize your database:
cinder-manage db sync
Finally, don't forget to create a volumegroup and name it cinder-volumes:
dd if=/dev/zero of=cinder-volumes bs=1 count=0 seek=2G losetup /dev/loop2 cinder-volumes fdisk /dev/loop2 #Type in the followings: n p 1 ENTER ENTER t 8e w
Proceed to create the physical volume then the volume group:
pvcreate /dev/loop2 vgcreate cinder-volumes /dev/loop2
Note: Beware that this volume group gets lost after a system reboot. (Click Here to know how to load it after a reboot)
Restart the cinder services:
cd /etc/init.d/; for i in $( ls cinder-* ); do sudo service $i restart; done
Verify if cinder services are running:
cd /etc/init.d/; for i in $( ls cinder-* ); do sudo service $i status; done
To install horizon, proceed like this
apt-get install -y openstack-dashboard memcached
If you don't like the OpenStack ubuntu theme, you can remove the package to disable it:
dpkg --purge openstack-dashboard-ubuntu-theme
Reload Apache and memcached:
service apache2 restart; service memcached restart
Check OpenStack Dashboard at http://192.168.100.51/horizon. We can login with the admin / admin_pass
After you install Ubuntu 12.04 or 13.04 Server 64bits, Go in sudo mode:
sudo su
Add Grizzly repositories [Only for Ubuntu 12.04]:
apt-get install -y ubuntu-cloud-keyring echo deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-updates/grizzly main >> /etc/apt/sources.list.d/grizzly.list
Update your system:
apt-get update -y apt-get upgrade -y apt-get dist-upgrade -y
Install ntp service:
apt-get install -y ntp
Configure the NTP server to follow the controller node:
#Comment the ubuntu NTP servers sed -i 's/server 0.ubuntu.pool.ntp.org/#server 0.ubuntu.pool.ntp.org/g' /etc/ntp.conf sed -i 's/server 1.ubuntu.pool.ntp.org/#server 1.ubuntu.pool.ntp.org/g' /etc/ntp.conf sed -i 's/server 2.ubuntu.pool.ntp.org/#server 2.ubuntu.pool.ntp.org/g' /etc/ntp.conf sed -i 's/server 3.ubuntu.pool.ntp.org/#server 3.ubuntu.pool.ntp.org/g' /etc/ntp.conf #Set the network node to follow up your conroller node sed -i 's/server ntp.ubuntu.com/server 10.10.10.51/g' /etc/ntp.conf service ntp restart
Install other services:
apt-get install -y vlan bridge-utils
Enable IP_Forwarding:
sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf # To save you from rebooting, perform the following sysctl net.ipv4.ip_forward=1
3 NICs must be present:
# OpenStack management auto eth0 iface eth0 inet static address 10.10.10.52 netmask 255.255.255.0 # VM Configuration auto eth1 iface eth1 inet static address 10.20.20.52 netmask 255.255.255.0 # VM internet Access auto eth2 iface eth2 inet static address 192.168.100.52 netmask 255.255.255.0
Install the openVSwitch:
apt-get install -y openvswitch-switch openvswitch-datapath-dkms
Create the bridges:
#br-int will be used for VM integration ovs-vsctl add-br br-int #br-ex is used to make to VM accessible from the internet ovs-vsctl add-br br-ex
Install the Quantum openvswitch agent, l3 agent and dhcp agent:
apt-get -y install quantum-plugin-openvswitch-agent quantum-dhcp-agent quantum-l3-agent quantum-metadata-agent
Edit /etc/quantum/api-paste.ini:
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = quantum admin_password = service_pass
Edit the OVS plugin configuration file /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini with:
#Under the database section [DATABASE] sql_connection = mysql://quantumUser:[email protected]/quantum #Under the OVS section [OVS] tenant_network_type = gre tunnel_id_ranges = 1:1000 integration_bridge = br-int tunnel_bridge = br-tun local_ip = 10.20.20.52 enable_tunneling = True #Firewall driver for realizing quantum security group function [SECURITYGROUP] firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
Update /etc/quantum/metadata_agent.ini:
# The Quantum user information for accessing the Quantum API. auth_url = http://10.10.10.51:35357/v2.0 auth_region = RegionOne admin_tenant_name = service admin_user = quantum admin_password = service_pass # IP address used by Nova metadata server nova_metadata_ip = 10.10.10.51 # TCP Port used by Nova metadata server nova_metadata_port = 8775 metadata_proxy_shared_secret = helloOpenStack
Make sure that your rabbitMQ IP in /etc/quantum/quantum.conf is set to the controller node:
rabbit_host = 10.10.10.51 #And update the keystone_authtoken section [keystone_authtoken] auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = quantum admin_password = service_pass signing_dir = /var/lib/quantum/keystone-signing
Edit /etc/sudoers.d/quantum_sudoers to give it full access like this (This is unfortunatly mandatory)
nano /etc/sudoers.d/quantum_sudoers #Modify the quantum user quantum ALL=NOPASSWD: ALL
Restart all the services:
cd /etc/init.d/; for i in $( ls quantum-* ); do sudo service $i restart; done
Edit the eth2 in /etc/network/interfaces to become like this:
# VM internet Access auto eth2 iface eth2 inet manual up ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFACE promisc off down ifconfig $IFACE down
Add the eth2 to the br-ex:
#Internet connectivity will be lost after this step but this won't affect OpenStack's work ovs-vsctl add-port br-ex eth2 #If you want to get internet connection back, you can assign the eth2's IP address to the br-ex in the /etc/network/interfaces file.
After you install Ubuntu 12.04 or 13.04 Server 64bits, Go in sudo mode:
sudo su
Add Grizzly repositories [Only for Ubuntu 12.04]:
apt-get install -y ubuntu-cloud-keyring echo deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-updates/grizzly main >> /etc/apt/sources.list.d/grizzly.list
Update your system:
apt-get update -y apt-get upgrade -y apt-get dist-upgrade -y
Reboot (you might have new kernel)
Install ntp service:
apt-get install -y ntp
Configure the NTP server to follow the controller node:
#Comment the ubuntu NTP servers sed -i 's/server 0.ubuntu.pool.ntp.org/#server 0.ubuntu.pool.ntp.org/g' /etc/ntp.conf sed -i 's/server 1.ubuntu.pool.ntp.org/#server 1.ubuntu.pool.ntp.org/g' /etc/ntp.conf sed -i 's/server 2.ubuntu.pool.ntp.org/#server 2.ubuntu.pool.ntp.org/g' /etc/ntp.conf sed -i 's/server 3.ubuntu.pool.ntp.org/#server 3.ubuntu.pool.ntp.org/g' /etc/ntp.conf #Set the compute node to follow up your conroller node sed -i 's/server ntp.ubuntu.com/server 10.10.10.51/g' /etc/ntp.conf service ntp restart
Install other services:
apt-get install -y vlan bridge-utils
Enable IP_Forwarding:
sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf # To save you from rebooting, perform the following sysctl net.ipv4.ip_forward=1
Perform the following:
# OpenStack management auto eth0 iface eth0 inet static address 10.10.10.53 netmask 255.255.255.0 # VM Configuration auto eth1 iface eth1 inet static address 10.20.20.53 netmask 255.255.255.0
make sure that your hardware enables virtualization:
apt-get install -y cpu-checker kvm-ok
Normally you would get a good response. Now, move to install kvm and configure it:
apt-get install -y kvm libvirt-bin pm-utils
Edit the cgroup_device_acl array in the /etc/libvirt/qemu.conf file to:
cgroup_device_acl = [ "/dev/null", "/dev/full", "/dev/zero", "/dev/random", "/dev/urandom", "/dev/ptmx", "/dev/kvm", "/dev/kqemu", "/dev/rtc", "/dev/hpet","/dev/net/tun" ]
Delete default virtual bridge
virsh net-destroy default virsh net-undefine default
Enable live migration by updating /etc/libvirt/libvirtd.conf file:
listen_tls = 0 listen_tcp = 1 auth_tcp = "none"
Edit libvirtd_opts variable in /etc/init/libvirt-bin.conf file:
env libvirtd_opts="-d -l"
Edit /etc/default/libvirt-bin file
libvirtd_opts="-d -l"
Restart the libvirt service and dbus to load the new values:
service dbus restart && service libvirt-bin restart
Install the openVSwitch:
apt-get install -y openvswitch-switch openvswitch-datapath-dkms
Create the bridges:
#br-int will be used for VM integration ovs-vsctl add-br br-int
Install the Quantum openvswitch agent:
apt-get -y install quantum-plugin-openvswitch-agent
Edit the OVS plugin configuration file /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini with:
#Under the database section [DATABASE] sql_connection = mysql://quantumUser:[email protected]/quantum #Under the OVS section [OVS] tenant_network_type = gre tunnel_id_ranges = 1:1000 integration_bridge = br-int tunnel_bridge = br-tun local_ip = 10.20.20.53 enable_tunneling = True #Firewall driver for realizing quantum security group function [SECURITYGROUP] firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
Make sure that your rabbitMQ IP in /etc/quantum/quantum.conf is set to the controller node:
rabbit_host = 10.10.10.51 #And update the keystone_authtoken section [keystone_authtoken] auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = quantum admin_password = service_pass signing_dir = /var/lib/quantum/keystone-signing
Restart all the services:
service quantum-plugin-openvswitch-agent restart
Install nova's required components for the compute node:
apt-get install -y nova-compute-kvm
Now modify authtoken section in the /etc/nova/api-paste.ini file to this:
[filter:authtoken] paste.filter_factory = keystoneclient.middleware.auth_token:filter_factory auth_host = 10.10.10.51 auth_port = 35357 auth_protocol = http admin_tenant_name = service admin_user = nova admin_password = service_pass signing_dirname = /tmp/keystone-signing-nova # Workaround for https://bugs.launchpad.net/nova/+bug/1154809 auth_version = v2.0
Edit /etc/nova/nova-compute.conf file
[DEFAULT] libvirt_type=kvm libvirt_ovs_bridge=br-int libvirt_vif_type=ethernet libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriver libvirt_use_virtio_for_bridges=True
Modify the /etc/nova/nova.conf like this:
[DEFAULT] logdir=/var/log/nova state_path=/var/lib/nova lock_path=/run/lock/nova verbose=True api_paste_config=/etc/nova/api-paste.ini compute_scheduler_driver=nova.scheduler.simple.SimpleScheduler rabbit_host=10.10.10.51 nova_url=http://10.10.10.51:8774/v1.1/ sql_connection=mysql://novaUser:[email protected]/nova root_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf # Auth use_deprecated_auth=false auth_strategy=keystone # Imaging service glance_api_servers=10.10.10.51:9292 image_service=nova.image.glance.GlanceImageService # Vnc configuration novnc_enabled=true novncproxy_base_url=http://192.168.100.51:6080/vnc_auto.html novncproxy_port=6080 vncserver_proxyclient_address=10.10.10.53 vncserver_listen=0.0.0.0 # Network settings network_api_class=nova.network.quantumv2.api.API quantum_url=http://10.10.10.51:9696 quantum_auth_strategy=keystone quantum_admin_tenant_name=service quantum_admin_username=quantum quantum_admin_password=service_pass quantum_admin_auth_url=http://10.10.10.51:35357/v2.0 libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriver linuxnet_interface_driver=nova.network.linux_net.LinuxOVSInterfaceDriver #If you want Quantum + Nova Security groups firewall_driver=nova.virt.firewall.NoopFirewallDriver security_group_api=quantum #If you want Nova Security groups only, comment the two lines above and uncomment line -1-. #-1-firewall_driver=nova.virt.libvirt.firewall.IptablesFirewallDriver #Metadata service_quantum_metadata_proxy = True quantum_metadata_proxy_shared_secret = helloOpenStack # Compute # compute_driver=libvirt.LibvirtDriver # Cinder # volume_api_class=nova.volume.cinder.API osapi_volume_listen_port=5900 cinder_catalog_info=volume:cinder:internalURL
Restart nova-* services:
cd /etc/init.d/; for i in $( ls nova-* ); do sudo service $i restart; done
Check for the smiling faces on nova-* services to confirm your installation:
nova-manage service list
To start your first VM, we first need to create a new tenant, user and internal network.
Create a new tenant
keystone tenant-create --name project_one
Create a new user and assign the member role to it in the new tenant (keystone role-list to get the appropriate id):
keystone user-create --name=user_one --pass=user_one --tenant-id $put_id_of_project_one [email protected] keystone user-role-add --tenant-id $put_id_of_project_one --user-id $put_id_of_user_one --role-id $put_id_of_member_role
Create a new network for the tenant:
quantum net-create --tenant-id $put_id_of_project_one net_proj_one
Create a new subnet inside the new tenant network:
quantum subnet-create --tenant-id $put_id_of_project_one net_proj_one 50.50.1.0/24 --dns_nameservers list=true 8.8.8.7 8.8.8.8
Create a router for the new tenant:
quantum router-create --tenant-id $put_id_of_project_one router_proj_one
Add the router to the running l3 agent (if it wasn't automatically added):
quantum agent-list (to get the l3 agent ID) quantum l3-agent-router-add $l3_agent_ID router_proj_one
Add the router to the subnet:
quantum router-interface-add $put_router_proj_one_id_here $put_subnet_id_here
Restart all quantum services:
cd /etc/init.d/; for i in $( ls quantum-* ); do sudo service $i restart; done
Create an external network with the tenant id belonging to the admin tenant (keystone tenant-list to get the appropriate id):
quantum net-create --tenant-id $put_id_of_admin_tenant ext_net --router:external=True
Create a subnet for the floating ips:
quantum subnet-create --tenant-id $put_id_of_admin_tenant --allocation-pool start=192.168.100.102,end=192.168.100.126 --gateway 192.168.100.1 ext_net 192.168.100.100/24 --enable_dhcp=False
Set your router's gateway to the external network:
quantum router-gateway-set $put_router_proj_one_id_here $put_id_of_ext_net_here
Source creds relative to your project one tenant now:
nano creds_proj_one #Paste the following: export OS_TENANT_NAME=project_one export OS_USERNAME=user_one export OS_PASSWORD=user_one export OS_AUTH_URL="http://192.168.100.51:5000/v2.0/" source creds_proj_one
Add this security rules to make your VMs pingable:
nova --no-cache secgroup-add-rule default icmp -1 -1 0.0.0.0/0 nova --no-cache secgroup-add-rule default tcp 22 22 0.0.0.0/0
Start by allocating a floating ip to the project one tenant:
quantum floatingip-create ext_net
Start a VM:
nova --no-cache boot --image $id_myFirstImage --flavor 1 my_first_vm
pick the id of the port corresponding to your VM:
quantum port-list
Associate the floating IP to your VM:
quantum floatingip-associate $put_id_floating_ip $put_id_vm_port
That's it ! ping your VM and enjoy your OpenStack.
OpenStack Grizzly Install Guide is licensed under a Creative Commons Attribution 3.0 Unported License.
To view a copy of this license, visit [ http://creativecommons.org/licenses/by/3.0/deed.en_US ].
Bilel Msekni : [email protected]
This work has been based on:
- Bilel Msekni's Folsom Install guide [https://github.com/mseknibilel/OpenStack-Folsom-Install-guide]
- OpenStack Grizzly Install Guide (Master Branch) [https://github.com/mseknibilel/OpenStack-Grizzly-Install-Guide]
Your suggestions are always welcomed.