TFT35 V2.0 + ESP01S Wifi

[Doom6666]

Hi, I have a TFT35 V2.0 with ESP01S attached. I am connected to my home WiFi. However, it is not working to transfer files to the SD card located in TFT35. Can anyone help? Thanks

[grego1981]

As mentioned in a another issue, this is not implemented yet. How did you connect it to the WiFi?

[Doom6666]

Jak je uvedeno v jiném čísle , toto ještě není implementováno. Jak jste se připojili k WiFi?

I uploaded ESP3D firmware to ESP01S and inserted ESP3-WebUI with configuration as CLIENT ... inserted into slot on TFT35 V2.0. I can control the printer via WiFi, but I still cannot upload files to SD. I have V2.0.23 firmware on TFT35 V2.0...

[luc-github]

if your TFT is connected using serial (touch mode) ESP3D has no way to access the TFT SD card reader, it can only access to printer SD card if any

[dineshvyas]

Jak je uvedeno v jiném čísle , toto ještě není implementováno. Jak jste se připojili k WiFi?

I uploaded ESP3D firmware to ESP01S and inserted ESP3-WebUI with configuration as CLIENT ... inserted into slot on TFT35 V2.0. I can control the printer via WiFi, but I still cannot upload files to SD. I have V2.0.23 firmware on TFT35 V2.0...

Can you post step by step instructions?

[TimboNZ76]

Any progress on this situation ie upgrades etc?

[acidcoolxxx]

Have the same issue. For now I use the Onboard option. Change #define SDCARD_CONNECTION LCD to #define SDCARD_CONNECTION ONBOARD and you have at least access to it over wifi. Use M22 to unmount the SDcard so it will be displayed again on your PC.

[dineshvyas]

It is easier than I could believe, configured with hit and try. Working! wifi with SKR_PRO_1.1.

[epicurean70]

IS esp01s supported on the tft35 v2 now?

[Mikomanus]

yep it is. But i still can't get the SD card working over wifi.

[luc-github]

Local tft SD card is not yet supported in ESP3D

[baccula]

Any plans to implement local SD access? My printer board doesn't have SD so I have to use the TFT slot.