[pull] master from torvalds:master #130
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
req->work might be already initialised by the time it gets into __io_arm_poll_handler(), which will corrupt it by using fields that are in an union with req->work. Luckily, the only side effect is missing put_creds(). Clean req->work before going there. Suggested-by: Jens Axboe <[email protected]> Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
io_fail_links() doesn't consider REQ_F_COMP_LOCKED leading to nested
spin_lock(completion_lock) and lockup.
[ 197.680409] rcu: INFO: rcu_preempt detected expedited stalls on
CPUs/tasks: { 6-... } 18239 jiffies s: 1421 root: 0x40/.
[ 197.680411] rcu: blocking rcu_node structures:
[ 197.680412] Task dump for CPU 6:
[ 197.680413] link-timeout R running task 0 1669
1 0x8000008a
[ 197.680414] Call Trace:
[ 197.680420] ? io_req_find_next+0xa0/0x200
[ 197.680422] ? io_put_req_find_next+0x2a/0x50
[ 197.680423] ? io_poll_task_func+0xcf/0x140
[ 197.680425] ? task_work_run+0x67/0xa0
[ 197.680426] ? do_exit+0x35d/0xb70
[ 197.680429] ? syscall_trace_enter+0x187/0x2c0
[ 197.680430] ? do_group_exit+0x43/0xa0
[ 197.680448] ? __x64_sys_exit_group+0x18/0x20
[ 197.680450] ? do_syscall_64+0x52/0xa0
[ 197.680452] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
If the controller died exactly when we are receiving icresp we hang because icresp may never return. Make sure to set a high finite limit. Fixes: 3f2304f ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
After commit 6e02318 ("nvme: add support for the Write Zeroes command"), SK hynix PC400 becomes very slow with the following error message: [ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0] SK Hynix PC400 has a buggy firmware that treats NLB as max value instead of a range, so the NLB passed isn't a valid value to the firmware. According to SK hynix there are three commands are affected: - Write Zeroes - Compare - Write Uncorrectable Right now only Write Zeroes is implemented, so disable it completely on SK hynix PC400. BugLink: https://bugs.launchpad.net/bugs/1872383 Cc: kyounghwan sohn <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
Add a quirk for a device that does not support the Identify Namespace Identification Descriptor list despite claiming 1.3 compliance. Fixes: ea43d97 ("nvme: fix identify error status silent ignore") Reported-by: Ingo Brunberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Tested-by: Ingo Brunberg <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]>
Pull NVMe fixes from Christoph. * 'nvme-5.8' of git://git.infradead.org/nvme: nvme: add a Identify Namespace Identification Descriptor list quirk nvme-pci: prevent SK hynix PC400 from using Write Zeroes command nvme-tcp: fix possible hang waiting for icresp response
…rcpu.h Daniel Díaz and Kees Cook independently reported that commit f227e3e ("random32: update the net random state on interrupt and activity") broke arm64 due to a circular dependency on include files since the addition of percpu.h in random.h. The correct fix would definitely be to move all the prandom32 stuff out of random.h but for backporting, a smaller solution is preferred. This one replaces linux/percpu.h with asm/percpu.h, and this fixes the problem on x86_64, arm64, arm, and mips. Note that moving percpu.h around didn't change anything and that removing it entirely broke differently. When backporting, such options might still be considered if this patch fails to help. [ It turns out that an alternate fix seems to be to just remove the troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h> that causes the circular dependency. But we might as well do the whole belt-and-suspenders thing, and minimize inclusion in <linux/random.h> too. Either will fix the problem, and both are good changes. - Linus ] Reported-by: Daniel Díaz <[email protected]> Reported-by: Kees Cook <[email protected]> Tested-by: Marc Zyngier <[email protected]> Fixes: f227e3e Cc: Stephen Rothwell <[email protected]> Signed-off-by: Willy Tarreau <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Pull io_uring fixes from Jens Axboe: "Two small fixes for corner/error cases" * tag 'io_uring-5.8-2020-07-30' of git://git.kernel.dk/linux-block: io_uring: fix lockup in io_fail_links() io_uring: fix ->work corruption with poll_add
Pull block fixes from Jens Axboe: "Three NVMe fixes" * tag 'block-5.8-2020-07-30' of git://git.kernel.dk/linux-block: nvme: add a Identify Namespace Identification Descriptor list quirk nvme-pci: prevent SK hynix PC400 from using Write Zeroes command nvme-tcp: fix possible hang waiting for icresp response
pull bot
pushed a commit
that referenced
this pull request
Jan 28, 2021
A cleanup patch from my legacy timer series broke ia64 and led to RCU stall errors and a fast system clock: [ 909.360108] INFO: task systemd-sysv-ge:200 blocked for more than 127 seconds. [ 909.360108] Not tainted 5.10.0+ #130 [ 909.360108] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 909.360108] task:systemd-sysv-ge state:D stack: 0 pid: 200 ppid: 189 flags:0x00000000 [ 909.364108] [ 909.364108] Call Trace: [ 909.364423] [<a00000010109b210>] __schedule+0x890/0x21e0 [ 909.364423] sp=e0000100487d7b70 bsp=e0000100487d1748 [ 909.368423] [<a00000010109cc00>] schedule+0xa0/0x240 [ 909.368423] sp=e0000100487d7b90 bsp=e0000100487d16e0 [ 909.368558] [<a00000010109ce70>] io_schedule+0x70/0xa0 [ 909.368558] sp=e0000100487d7b90 bsp=e0000100487d16c0 [ 909.372290] [<a00000010109e1c0>] bit_wait_io+0x20/0xe0 [ 909.372290] sp=e0000100487d7b90 bsp=e0000100487d1698 [ 909.374168] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [ 909.376290] [<a00000010109d860>] __wait_on_bit+0xc0/0x1c0 [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1648 [ 909.374168] rcu: 3-....: (2 ticks this GP) idle=19e/1/0x4000000000000002 softirq=1581/1581 fqs=2 [ 909.374168] (detected by 0, t=5661 jiffies, g=1089, q=3) [ 909.376290] [<a00000010109da80>] out_of_line_wait_on_bit+0x120/0x140 [ 909.376290] sp=e0000100487d7b90 bsp=e0000100487d1610 [ 909.374168] Task dump for CPU 3: [ 909.374168] task:khungtaskd state:R running task Revert most of my patch to make this work again, including the extra update_process_times()/profile_tick() and the local_irq_enable() in the loop that I expected not to be needed here. I have not found out exactly what goes wrong, and would suggest that someone with hardware access tries to convert this code into a singleshot clockevent driver, which should give better behavior in all cases. Reported-by: John Paul Adrian Glaubitz <[email protected]> Fixes: 2b49ddc ("ia64: convert to legacy_timer_tick") Cc: John Stultz <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Stephen Boyd <[email protected]> Cc: Frederic Weisbecker <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Jan 20, 2024
Like commit 1cf3bfc ("bpf: Support 64-bit pointers to kfuncs") for s390x, add support for 64-bit pointers to kfuncs for LoongArch. Since the infrastructure is already implemented in BPF core, the only thing need to be done is to override bpf_jit_supports_far_kfunc_call(). Before this change, several test_verifier tests failed: # ./test_verifier | grep # | grep FAIL #119/p calls: invalid kfunc call: ptr_to_mem to struct with non-scalar FAIL #120/p calls: invalid kfunc call: ptr_to_mem to struct with nesting depth > 4 FAIL #121/p calls: invalid kfunc call: ptr_to_mem to struct with FAM FAIL #122/p calls: invalid kfunc call: reg->type != PTR_TO_CTX FAIL #123/p calls: invalid kfunc call: void * not allowed in func proto without mem size arg FAIL #124/p calls: trigger reg2btf_ids[reg->type] for reg->type > __BPF_REG_TYPE_MAX FAIL #125/p calls: invalid kfunc call: reg->off must be zero when passed to release kfunc FAIL #126/p calls: invalid kfunc call: don't match first member type when passed to release kfunc FAIL #127/p calls: invalid kfunc call: PTR_TO_BTF_ID with negative offset FAIL #128/p calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset FAIL #129/p calls: invalid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL #130/p calls: valid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL #486/p map_kptr: ref: reference state created and released on xchg FAIL This is because the kfuncs in the loaded module are far away from __bpf_call_base: ffff800002009440 t bpf_kfunc_call_test_fail1 [bpf_testmod] 9000000002e128d8 T __bpf_call_base The offset relative to __bpf_call_base does NOT fit in s32, which breaks the assumption in BPF core. Enable bpf_jit_supports_far_kfunc_call() lifts this limit. Note that to reproduce the above result, tools/testing/selftests/bpf/config should be applied, and run the test with JIT enabled, unpriv BPF enabled. With this change, the test_verifier tests now all passed: # ./test_verifier ... Summary: 777 PASSED, 0 SKIPPED, 0 FAILED Tested-by: Tiezhu Yang <[email protected]> Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
pull bot
pushed a commit
that referenced
this pull request
Nov 21, 2024
The new subtest runs with bpf_prog_test_run_opts() as a syscall prog. It iterates the kmem_cache using bpf_for_each loop and count the number of entries. Finally it checks it with the number of entries from the regular iterator. $ ./vmtest.sh -- ./test_progs -t kmem_cache_iter ... #130/1 kmem_cache_iter/check_task_struct:OK #130/2 kmem_cache_iter/check_slabinfo:OK #130/3 kmem_cache_iter/open_coded_iter:OK #130 kmem_cache_iter:OK Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED Also simplify the code by using attach routine of the skeleton. Signed-off-by: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]. Want to support this open source service? Please star it : )