diff --git a/.gitignore b/.gitignore index 4ad4a98b884b9..5bc7062332561 100644 --- a/.gitignore +++ b/.gitignore @@ -106,3 +106,7 @@ all.config # Kdevelop4 *.kdev4 + +# dtb objects +*.dtb +*.dtbo diff --git a/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr new file mode 100644 index 0000000000000..e2df613581234 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr @@ -0,0 +1,63 @@ +What: /sys/devices/platform/bone_capemgr/slots +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: + READ: + Describe the state of all the slots of the beaglebone capemgr. + Each line of the output describes a slot: + The slot format is as following: + : [P-][F-][O-][l-][L-][D-] \ + ,, + , + + Where the flags are: + P: Slot has been probed + F: Slot has failed probing (i.e. no EEPROM detected) + O: Slot has been overridden by the user + l: Slot is current loading + L: Slot has completed loading and is ready + D: Slot has been disabled + + Example: + 0: P---L- -1 BeagleBone RS232 CAPE,00A1,Beagleboardtoys,BB-BONE-SERL-03 + 1: PF---- -1 + 2: PF---- -1 + 3: PF---- -1 + + WRITE: + Writing a string of the form [:version] issues a request to + load a firmware blob containing an overlay. The name of the firmware blob + is -[version|00A0].dtbo. This act is defined as a slot override. + + Writing a negative slot id removes the slot if it was an overridden one, or + unloads a slot that was probed. + +What: /sys/devices/platform/bone_capemgr/baseboard/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed base board EEPROM field; one of: + board-name - board-name as stored in cape EEPROM + dc-supplied - whether the cape draws or supplies DC + eeprom-format-revision - EEPROM format rev, only 00A0 supported + header - header; should be 'aa 55 33 ee' + manufacturer - manufacturer string + part-number - part-number of the cape + serial-number - serial number of the cape + version - version of the cape, i.e. 00A0 + number-of-pins - displayed but ignored + pin-usage - displayed but ignored + sys-5v - displayed but ignored + vdd-3v3exp - displayed but ignored + vdd-5v - displayed but ignored +What: /sys/devices/platform/bone_capemgr/slot-/ +Date: May 2015 +KernelVersion: 4.0 +Contact: Pantelis Antoniou +Description: Contains the probed cape's EEPROM field; the field is one of: + board-name - baseboard name i.e. A335BNLT + header - header; should be 'aa 55 33 ee' + revision - baseboard revision + serial-number - baseboard serial number + config-option - displayed but ignored diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid deleted file mode 100644 index ffb9536f6ecc1..0000000000000 --- a/Documentation/ABI/testing/sysfs-driver-sunxi-sid +++ /dev/null @@ -1,22 +0,0 @@ -What: /sys/devices/*//eeprom -Date: August 2013 -Contact: Oliver Schinagl -Description: read-only access to the SID (Security-ID) on current - A-series SoC's from Allwinner. Currently supports A10, A10s, A13 - and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes, - whereas the newer A20 SoC exposes 512 bytes split into sections. - Besides the 16 bytes of SID, there's also an SJTAG area, - HDMI-HDCP key and some custom keys. Below a quick overview, for - details see the user manual: - 0x000 128 bit root-key (sun[457]i) - 0x010 128 bit boot-key (sun7i) - 0x020 64 bit security-jtag-key (sun7i) - 0x028 16 bit key configuration (sun7i) - 0x02b 16 bit custom-vendor-key (sun7i) - 0x02c 320 bit low general key (sun7i) - 0x040 32 bit read-control access (sun7i) - 0x064 224 bit low general key (sun7i) - 0x080 2304 bit HDCP-key (sun7i) - 0x1a0 768 bit high general key (sun7i) -Users: any user space application which wants to read the SID on - Allwinner's A-series of CPU's. diff --git a/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays new file mode 100644 index 0000000000000..9ed6d64e7d94b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-devicetree-overlays @@ -0,0 +1,34 @@ +What: /sys/firmware/devicetree/overlays/ +Date: March 2015 +Contact: Pantelis Antoniou +Description: + This directory contains the applied device tree overlays of + the running system, as directories of the overlay id. + + enable: The master enable switch, by default is 1, and when + set to 0 it cannot be re-enabled for security reasons. + +What: /sys/firmware/devicetree/overlays/ +Date: March 2015 +Contact: Pantelis Antoniou +Description: + Each directory represents an applied overlay, containing + the following attribute files. + + The discussion about this switch takes place in: + http://comments.gmane.org/gmane.linux.drivers.devicetree/101871 + + Kees Cook: + "Coming from the perspective of drawing a bright line between + kernel and the root user (which tends to start with disabling + kernel module loading), I would say that there at least needs + to be a high-level one-way "off" switch for the interface so + that systems that have this interface can choose to turn it off + during initial boot, etc." + + targets: A file containing the list of targets of each overlay + with each line containing a target. + + can_remove: The attribute set to 1 means that the overlay can + be removed, while 0 means that the overlay is being + overlapped therefore removal is prohibited. diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index cbe35b3de9e90..66e07452d9d26 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -24,6 +24,9 @@ Optional properties: - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init - ti,no-idle: When present, the module is never allowed to idle. +- ti,deassert-hard-reset: list of hwmod and hardware reset line name pairs + (ascii strings) to be deasserted upon device instantiation. + Example: diff --git a/Documentation/devicetree/bindings/misc/bone_capemgr.txt b/Documentation/devicetree/bindings/misc/bone_capemgr.txt new file mode 100644 index 0000000000000..7e4fbc982ceab --- /dev/null +++ b/Documentation/devicetree/bindings/misc/bone_capemgr.txt @@ -0,0 +1,111 @@ +* Beaglebone cape manager driver + +Required properties: +- compatible: "ti,bone-capemgr" +- eeprom: phandle to the EEPROM baseboard. + The EEPROM framework interface is use to obtain the data. + +Required children nodes: + +- baseboardmaps: Contains nodes, which each of the them defines a mapping from + the baseboard EEPROM board-name ID to a DT friendly compatible + string. + + - board-name: The baseboard EEPROM board name, i.e. A335BONE for the + original beaglebone white. + - compatible-name: The DT friendly compatible string to be used for matching + compatible capes, i.e. "ti,beaglebone" + + + - nvmem-cells: Defines the phandles of the nvmem cells of the baseboard and the + slots. + - nvmem-cells: Defines the names of the nvmem cells. Required to have at + least a baseboard cell name. + + - #slots: Defines how many slots are there. + +- Example of a beaglebone cape-manager: + +bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cell = <&baseboard_data + &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; +}; + +The format of the cape to be loaded is in a standard overlay format with +the following root properties that are interpreted by the cape manager: + +Required properties: + - compatible: Should be compatible to the baseboard according to the + baseboard map value, i.e. "ti,beaglebone". + - part-numer: Should contain the part-number as stored in the EEPROM. + - version: Should contain a list of all the version that are supported + by the single cape dtbo, i.e. "00A1". + +Optional properties: + - exclusive-use: A string list which state the resources this cape requires. + No processing or matching to anything regarding the internal + kernel state is performed; it's purpose is to guard against + conflicts with other capes. + - priority: A priority to be assigned when loading a cape. A lower value + has higher priority. The purpose of the priority is to control + which cape is loaded first in case of a conflict. + +- Example of a serial cape: + +/dts-v1/; +/plugin/; +/ { + compatible = "ti,beaglebone", "ti,beaglebone-black"; + + /* identification */ + part-number = "BB-BONE-SERL-03"; + version = "00A1"; + + /* state the resources this cape uses */ + exclusive-use = + /* the pin header uses */ + "P9.21", /* uart2_txd */ + "P9.22", /* uart2_rxd */ + /* the hardware ip uses */ + "uart2"; + + fragment@0 { + target = <&am33xx_pinmux>; + __overlay__ { + bb_uart2_pins: pinmux_bb_uart2_pins { + pinctrl-single,pins = < + 0x150 0x21 /* spi0_sclk.uart2_rxd | MODE1 */ + 0x154 0x01 /* spi0_d0.uart2_txd | MODE1 */ + >; + }; + }; + }; + + fragment@1 { + target = <&uart2>; + __overlay__ { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&bb_uart2_pins>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt similarity index 78% rename from Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt rename to Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index fabdf64a5737c..d543ed3f53632 100644 --- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -4,6 +4,10 @@ Required properties: - compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" - reg: Should contain registers location and length += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + Example for sun4i: sid@01c23800 { compatible = "allwinner,sun4i-a10-sid"; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt new file mode 100644 index 0000000000000..b52bc11e95972 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -0,0 +1,80 @@ += NVMEM(Non Volatile Memory) Data Device Tree Bindings = + +This binding is intended to represent the location of hardware +configuration data stored in NVMEMs like eeprom, efuses and so on. + +On a significant proportion of boards, the manufacturer has stored +some data on NVMEM, for the OS to be able to retrieve these information +and act upon it. Obviously, the OS has to know about where to retrieve +these data from, and where they are stored on the storage device. + +This document is here to document this. + += Data providers = +Contains bindings specific to provider drivers and data cells as children +of this node. + +Optional properties: + read-only: Mark the provider as read only. + += Data cells = +These are the child nodes of the provider which contain data cell +information like offset and size in nvmem provider. + +Required properties: +reg: specifies the offset in byte within the storage device. + +Optional properties: + +bits: Is pair of bit location and number of bits, which specifies offset + in bit and number of bits within the address range specified by reg property. + Offset takes values from 0-7. + +For example: + + /* Provider */ + qfprom: qfprom@00700000 { + ... + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128> + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2> + bits = <7 2> + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + + }; + ... + }; + += Data consumers = +Are device nodes which consume nvmem data cells/providers. + +Required-properties: +nvmem-cells: list of phandle to the nvmem data cells. +nvmem-cell-names: names for the each nvmem-cells specified. Required if + nvmem-cells is used. + +Optional-properties: +nvmem : list of phandles to nvmem providers. +nvmem-names: names for the each nvmem provider. required if nvmem is used. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt new file mode 100644 index 0000000000000..4ad68b7f5c18b --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -0,0 +1,35 @@ += Qualcomm QFPROM device tree bindings = + +This binding is intended to represent QFPROM which is found in most QCOM SOCs. + +Required properties: +- compatible: should be "qcom,qfprom" +- reg: Should contain registers location and length + += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + qfprom: qfprom@00700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x8000>; + ... + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x4404 0x10>; + }; + }; + + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/Documentation/devicetree/configfs-overlays.txt b/Documentation/devicetree/configfs-overlays.txt new file mode 100644 index 0000000000000..5fa43e0643072 --- /dev/null +++ b/Documentation/devicetree/configfs-overlays.txt @@ -0,0 +1,31 @@ +Howto use the configfs overlay interface. + +A device-tree configfs entry is created in /config/device-tree/overlays +and and it is manipulated using standard file system I/O. +Note that this is a debug level interface, for use by developers and +not necessarily something accessed by normal users due to the +security implications of having direct access to the kernel's device tree. + +* To create an overlay you mkdir the directory: + + # mkdir /config/device-tree/overlays/foo + +* Either you echo the overlay firmware file to the path property file. + + # echo foo.dtbo >/config/device-tree/overlays/foo/path + +* Or you cat the contents of the overlay to the dtbo file + + # cat foo.dtbo >/config/device-tree/overlays/foo/dtbo + +The overlay file will be applied, and devices will be created/destroyed +as required. + +To remove it simply rmdir the directory. + + # rmdir /config/device-tree/overlays/foo + +The rationalle of the dual interface (firmware & direct copy) is that each is +better suited to different use patterns. The firmware interface is what's +intended to be used by hardware managers in the kernel, while the copy interface +make sense for developers (since it avoids problems with namespaces). diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index d418a6ce98120..00ede57d60cfc 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -100,6 +100,14 @@ Finally, if you need to remove all overlays in one-go, just call of_overlay_destroy_all() which will remove every single one in the correct order. +If your board has multiple slots/places where a single overlay can work +and each slot is defined by a node, you can use the of_overlay_create_indirect() +method to select the target. + +For overlays on probeable busses, use the of_overlay_create_target_root() method +in which you supply a device node as a target root, and which all target +references in the overlay are performed relative to that node. + Overlay DTS Format ------------------ @@ -113,6 +121,11 @@ The DTS of an overlay should have the following format: target=; /* phandle target of the overlay */ or target-path="/path"; /* target path of the overlay */ + or + target-indirect { /* indirect target selector */ + foo { target|target-path ... }; + bar { .... }; + }; __overlay__ { property-a; /* add property-a to the target */ @@ -131,3 +144,11 @@ Using the non-phandle based target method allows one to use a base DT which does not contain a __symbols__ node, i.e. it was not compiled with the -@ option. The __symbols__ node is only required for the target= method, since it contains the information required to map from a phandle to a tree location. + +The indirect target requires the use of a selector target on the call to +of_overlay_create_indirect(). I.e. passing the "foo" id will select the target +in the foo node, "bar" in bar node, etc. + +Note that when using the target root create method all target references must +lie under the target root node. I.e. the overlay is not allowed to 'break' out +of the root. diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index b40fec9d3f53b..eb4204cfceddc 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -51,15 +51,27 @@ configfs tree is always there, whether mounted on /config or not. An item is created via mkdir(2). The item's attributes will also appear at this time. readdir(3) can determine what the attributes are, read(2) can query their default values, and write(2) can store new -values. Like sysfs, attributes should be ASCII text files, preferably -with only one value per file. The same efficiency caveats from sysfs -apply. Don't mix more than one attribute in one attribute file. - -Like sysfs, configfs expects write(2) to store the entire buffer at -once. When writing to configfs attributes, userspace processes should -first read the entire file, modify the portions they wish to change, and -then write the entire buffer back. Attribute files have a maximum size -of one page (PAGE_SIZE, 4096 on i386). +values. Don't mix more than one attribute in one attribute file. + +There are two types of configfs attributes: + +* Normal attributes, which similar to sysfs attributes, are small ASCII text +files, with a maximum size of one page (PAGE_SIZE, 4096 on i386). Preferably +only one value per file should be used, and the same caveats from sysfs apply. +Configfs expects write(2) to store the entire buffer at once. When writing to +normal configfs attributes, userspace processes should first read the entire +file, modify the portions they wish to change, and then write the entire +buffer back. + +* Binary attributes, which are somewhat similar to sysfs binary attributes, +but with a few slight changes to semantics. The PAGE_SIZE limitation does not +apply, but the whole binary item must fit in single kernel vmalloc'ed buffer. +The write(2) calls from user space are buffered, and the attributes' +write_bin_attribute method will be invoked on the final close, therefore it is +imperative for user-space to check the return code of close(2) in order to +verify that the operation finished successfully. +To avoid a malicious user OOMing the kernel, there's a per-binary attribute +maximum buffer value. When an item needs to be destroyed, remove it with rmdir(2). An item cannot be destroyed if any other item has a link to it (via @@ -166,6 +178,12 @@ among other things. For that, it needs a type. ssize_t (*store_attribute)(struct config_item *, struct configfs_attribute *, const char *, size_t); + ssize_t (*read_bin_attribute)(struct config_item *, + struct configfs_bin_attribute *, + void *, size_t); + ssize_t (*write_bin_attribute)(struct config_item *, + struct configfs_bin_attribute *, + const void *, size_t); int (*allow_link)(struct config_item *src, struct config_item *target); int (*drop_link)(struct config_item *src, @@ -177,15 +195,18 @@ among other things. For that, it needs a type. struct configfs_item_operations *ct_item_ops; struct configfs_group_operations *ct_group_ops; struct configfs_attribute **ct_attrs; + struct configfs_bin_attribute **ct_bin_attrs; }; The most basic function of a config_item_type is to define what operations can be performed on a config_item. All items that have been allocated dynamically will need to provide the ct_item_ops->release() method. This method is called when the config_item's reference count -reaches zero. Items that wish to display an attribute need to provide -the ct_item_ops->show_attribute() method. Similarly, storing a new -attribute value uses the store_attribute() method. +reaches zero. Items that wish to display an normal attribute need to provide +the ct_item_ops->show_attribute() method, while binary attributes provide the +ct_item_ops->read_bin_attribute(). Similarly, storing a new normal attribute +value uses the store_attribute() method, while the binarys' attribute equivalent +is the ct_item_ops->write_bin_attribute() method. [struct configfs_attribute] @@ -207,6 +228,32 @@ ct_item_ops->show_attribute() method, that method will be called whenever userspace asks for a read(2) on the attribute. The converse will happen for write(2). +[struct configfs_bin_attribute] + + struct configfs_attribute { + struct configfs_attribute cb_attr; + void *cb_private; + size_t cb_max_size; + }; + +The binary attribute is used when the one needs to use binary blob to +appear as the contents of a file in the item's configfs directory. +To do so add the binary attribute to the NULL-terminated array +config_item_type->ct_bin_attrs, and the item appears in configfs, the +attribute file will appear with the configfs_bin_attribute->cb_attr.ca_name +filename. configfs_bin_attribute->cb_attr.ca_mode specifies the file +permissions. +The cb_private member is provided for use by the driver, while the +cb_max_size member specifies the maximum amount of vmalloc buffer +to be used. + +If binary attribute is readable and the config_item provides a +ct_item_ops->read_bin_attribute() method, that method will be called +whenever userspace asks for a read(2) on the attribute. The converse +will happen for write(2). The reads/writes are bufferred so only a +single read/write will occur; the attributes' need not concern itself +with it. + [struct config_group] A config_item cannot live in a vacuum. The only way one can be created diff --git a/Documentation/misc-devices/bone_capemgr.txt b/Documentation/misc-devices/bone_capemgr.txt new file mode 100644 index 0000000000000..2a8c766b4898c --- /dev/null +++ b/Documentation/misc-devices/bone_capemgr.txt @@ -0,0 +1,63 @@ +--------------------------- + Beaglebone Cape-Manager +--------------------------- + +The beaglebone cape manager driver allows the automatic use of external +peripheral capes to be automatically supported by Linux without any manual +setup required by the user. + +Each beaglebone cape should contain an EEPROM that describes +it in a fixed I2C address on the i2c2 bus of the baseboard. +The format of the EEPROM is defined in the beaglebone reference +manual at: +http://beagleboard.org/static/beaglebone/latest/Docs/Hardware/BONE_SRM.pdf + +Reading the part number and revision information the manager +requests a firmware file formatted as a device tree overlay blob. + +Applying the overlay the devices are instantiated and the cape is +ready to be used. + +For instance if the part-number is BB-BONE-SERL-03 and the version is 00A1 +the firmware file requested will be BB-BONE-SERL-03-00A1-00A1.dtbo +It will be located by the in-kernel firmware +loader in the usual place, i.e. /lib/firmware/`uname -r`, /lib/firmware etc. + +The driver supports the following parameters (either as part of the kernel +command line or supplied at module insertion time). + +disable_partno: A comma delimited list of PART-NUMBER[:REV] of + disabled capes. +enable_partno: A comma delimited list of PART-NUMBER[:REV[:PRIO]] of + enabled capes. +boot_scan_period: The boot scan period in ms. When the cape manager is built-in + the kernel image, the firmware loader cannot find the files + before the rootfs is mounted. This parameter controls the + period with which the boot state is checked in that case. + +There's a sysfs control interface which is defined at the ABI documentation +area. + +Theory of operation: +-------------------- + +On driver probe the I2C EEPROM of the baseboard is read and information about +the current baseboard is retrieved. This information includes the mapping from +baseboard board name to DT friendly compatible string. I.e. the "A335BONE" board +name from EEPROM is mapped to the "ti,beaglebone" compatible string which should +be present in the dtbo to be loaded. + +Afterwards the EEPROMs declared in each slot are probed, and the EEPROMs found +are decoded keeping track the cape part-number and version data. + +Using the part-number and version a firmware file is requested (the firmware +file requested is -.dtbo). + +The dtbo is unflattend and the resulting device tree is matched against a +compatible baseboard, and in case of multiple parallel loading capes the +priorities defined are honored. That means that when there are multiple capes +being loaded in parallel the ones with the lowest priority number are loaded +first. + +Applying the device tree overlay makes the cape operational, as if it was part +of the kernel's booting device tree. diff --git a/Documentation/nvmem/nvmem.txt b/Documentation/nvmem/nvmem.txt new file mode 100644 index 0000000000000..dbd40d8792394 --- /dev/null +++ b/Documentation/nvmem/nvmem.txt @@ -0,0 +1,152 @@ + NVMEM SUBSYSTEM + Srinivas Kandagatla + +This document explains the NVMEM Framework along with the APIs provided, +and how to use it. + +1. Introduction +=============== +*NVMEM* is the abbreviation for Non Volatile Memory layer. It is used to +retrieve configuration of SOC or Device specific data from non volatile +memories like eeprom, efuses and so on. + +Before this framework existed, NVMEM drivers like eeprom were stored in +drivers/misc, where they all had to duplicate pretty much the same code to +register a sysfs file, allow in-kernel users to access the content of the +devices they were driving, etc. + +This was also a problem as far as other in-kernel users were involved, since +the solutions used were pretty much different from one driver to another, there +was a rather big abstraction leak. + +This framework aims at solve these problems. It also introduces DT +representation for consumer devices to go get the data they require (MAC +Addresses, SoC/Revision ID, part numbers, and so on) from the NVMEMs. This +framework is based on regmap, so that most of the abstraction available in +regmap can be reused, across multiple types of buses. + +NVMEM Providers ++++++++++++++++ + +NVMEM provider refers to an entity that implements methods to initialize, read +and write the non-volatile memory. + +2. Registering/Unregistering the NVMEM provider +=============================================== + +A NVMEM provider can register with NVMEM core by supplying relevant +nvmem configuration to nvmem_register(), on success core would return a valid +nvmem_device pointer. + +nvmem_unregister(nvmem) is used to unregister a previously registered provider. + +For example, a simple qfprom case: + +static struct nvmem_config econfig = { + .name = "qfprom", + .owner = THIS_MODULE, +}; + +static int qfprom_probe(struct platform_device *pdev) +{ + ... + econfig.dev = &pdev->dev; + nvmem = nvmem_register(&econfig); + ... +} + +It is mandatory that the NVMEM provider has a regmap associated with its +struct device. Failure to do would return error code from nvmem_register(). + +NVMEM Consumers ++++++++++++++++ + +NVMEM consumers are the entities which make use of the NVMEM provider to +read from and to NVMEM. + +3. NVMEM cell based consumer APIs +================================= + +NVMEM cells are the data entries/fields in the NVMEM. +The NVMEM framework provides 3 APIs to read/write NVMEM cells. + +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); + +void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len); +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len); + +*nvmem_cell_get() apis will get a reference to nvmem cell for a given id, +and nvmem_cell_read/write() can then read or write to the cell. +Once the usage of the cell is finished the consumer should call *nvmem_cell_put() +to free all the allocation memory for the cell. + +4. Direct NVMEM device based consumer APIs +========================================== + +In some instances it is necessary to directly read/write the NVMEM. +To facilitate such consumers NVMEM framework provides below apis. + +struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); +struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); +void nvmem_device_put(struct nvmem_device *nvmem); +int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + +Before the consumers can read/write NVMEM directly, it should get hold +of nvmem_controller from one of the *nvmem_device_get() api. + +The difference between these apis and cell based apis is that these apis always +take nvmem_device as parameter. + +5. Releasing a reference to the NVMEM +===================================== + +When a consumers no longer needs the NVMEM, it has to release the reference +to the NVMEM it has obtained using the APIs mentioned in the above section. +The NVMEM framework provides 2 APIs to release a reference to the NVMEM. + +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); +void nvmem_device_put(struct nvmem_device *nvmem); +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); + +Both these APIs are used to release a reference to the NVMEM and +devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated +with this NVMEM. + +Userspace ++++++++++ + +6. Userspace binary interface +============================== + +Userspace can read/write the raw NVMEM file located at +/sys/bus/nvmem/devices/*/nvmem + +ex: + +hexdump /sys/bus/nvmem/devices/qfprom0/nvmem + +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +* +00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00 +0000000 0000 0000 0000 0000 0000 0000 0000 0000 +... +* +0001000 + +7. DeviceTree Binding +===================== + +See Documentation/devicetree/bindings/nvmem/nvmem.txt diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 2216eb187c213..a54f44ff99e8e 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -284,6 +284,37 @@ bitmap and its derivatives such as cpumask and nodemask: Passed by reference. +Device tree nodes: + + %pO[fnpPcCFr] + + For printing device tree nodes. The optional arguments are: + f device node full_name + n device node name + p device node phandle + P device node path spec (name + @unit) + F device node flags + c major compatible string + C full compatible string + r node reference count + Without any arguments prints full_name (same as %pOf) + The separator when using multiple arguments is '|' + + Examples: + + %pO /foo/bar@0 - Node full name + %pOf /foo/bar@0 - Same as above + %pOfp /foo/bar@0|10 - Node full name + phandle + %pOfcF /foo/bar@0|foo,device|--P- - Node full name + + major compatible string + + node flags + D - dynamic + d - detached + P - Populated + B - Populated bus + + Passed by reference + Thank you for your cooperation and attention. diff --git a/MAINTAINERS b/MAINTAINERS index eabc307f86ca5..01f83257f753c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1973,6 +1973,14 @@ W: http://bcache.evilpiepirate.org S: Maintained: F: drivers/md/bcache/ +BEAGLEBONE CAPEMANAGER +M: Pantelis Antoniou +S: Maintained +F: drivers/misc/beaglebone-capemgr.c +F: Documentation/misc-devices/bone_capemgr.txt +F: Documentation/devicetree/bindings/misc/bone_capemgr.txt +F: Documentation/ABI/testing/sysfs-devices-platform-bone_capemgr + BEFS FILE SYSTEM S: Orphan F: Documentation/filesystems/befs.txt diff --git a/am335x-myhomebox.dtc.tmp b/am335x-myhomebox.dtc.tmp new file mode 100644 index 0000000000000..0de30fd97bfbe --- /dev/null +++ b/am335x-myhomebox.dtc.tmp @@ -0,0 +1 @@ +am335x-myhomebox.out.dts: am335x-myhomebox.tmp arch/arm/boot/dts/am33xxhbox.dtsi arch/arm/boot/dts/skeleton.dtsi arch/arm/boot/dts/am335x-myhomebox-common.dtsi arch/arm/boot/dts/am33xxhbox.dtsi arch/arm/boot/dts/skeleton.dtsi \ No newline at end of file diff --git a/am335x-myhomebox.pre.tmp b/am335x-myhomebox.pre.tmp new file mode 100644 index 0000000000000..863801b5fa817 --- /dev/null +++ b/am335x-myhomebox.pre.tmp @@ -0,0 +1 @@ +am335x-myhomebox.o: arch/arm/boot/dts/am335x-myhomebox.dts diff --git a/am335x-myhomebox.tmp b/am335x-myhomebox.tmp new file mode 100644 index 0000000000000..510f73998c603 --- /dev/null +++ b/am335x-myhomebox.tmp @@ -0,0 +1,63 @@ +# 1 "./arch/arm/boot/dts/am335x-myhomebox.dts" +# 1 "" +# 1 "./arch/arm/boot/dts/am335x-myhomebox.dts" + + + + + + + +/dts-v1/; + +/include/ "am33xxhbox.dtsi" + +/include/ "am335x-myhomebox-common.dtsi" + +&am33xx_pinmux { + +}; + + +&ldo3_reg{ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&ldo2_reg{ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&ldo4_reg{ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + bus-width = <0x4>; + cd-gpios = <&gpio3 15 1>; + cd-inverted; + status = "okay"; + vmmc-supply = <&ldo2_reg>; + ti,vcc-aux-disable-is-sleep; +}; + + +&cpu { + + + + + + operating-points = < + + 600000 1125000 + 300000 975000 + >; +}; diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9eca7aee927f3..d4273d4df0b77 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -27,6 +27,10 @@ export ZRELADDR INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 38990aa2e8b65..24fbf5cf58f35 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,9 +1,15 @@ ifeq ($(CONFIG_OF),y) +ifeq ($(CONFIG_OF_OVERLAY),y) +DTC_FLAGS += -@ +endif + dtb-$(CONFIG_ARCH_ALPINE) += \ alpine-db.dtb + dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb + # Keep at91 dtb files sorted alphabetically for each SoC dtb-$(CONFIG_SOC_SAM_V4_V5) += \ at91rm9200ek.dtb \ @@ -406,9 +412,21 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ dtb-$(CONFIG_SOC_TI81XX) += \ dm8168-evm.dtb dtb-$(CONFIG_SOC_AM33XX) += \ + am335x-myhomebox4.dtb \ + am335x-myhomebox.dtb \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-bonegreen.dtb \ + am335x-boneblack-wl1835mod.dtb \ + am335x-boneblack-replicape.dtb \ + am335x-boneblack-overlay.dtb \ + am335x-boneblack-nhdmi-overlay.dtb \ + am335x-boneblack-hdmi-overlay.dtb \ + am335x-boneblack-emmc-overlay.dtb \ + am335x-arduino-tre.dtb \ + am335x-boneblack-overlay.dtb \ + am335x-bonegreen.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-nano.dtb \ diff --git a/arch/arm/boot/dts/am335x-arduino-tre.dts b/arch/arm/boot/dts/am335x-arduino-tre.dts new file mode 100644 index 0000000000000..ae76692fd1008 --- /dev/null +++ b/arch/arm/boot/dts/am335x-arduino-tre.dts @@ -0,0 +1,566 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "TI AM335x Arduino Tre"; + compatible = "ti,am335x-arduino-tre", "ti,am335x-boneblack", "ti,am335x-bone", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 512 MB */ + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + led0 { + label = "arduino_tre:yel:usr0"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led1 { + label = "arduino_tre:red:usr1"; + gpios = <&gpio1 22 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led2 { + label = "arduino_tre:blu:usr2"; + gpios = <&gpio1 23 0>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led3 { + label = "arduino_tre:grn:usr3"; + gpios = <&gpio1 24 0>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + }; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "DA830 EVM"; + ti,audio-codec = <&tlv320aic3x>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE2L", "Line In", + "LINE2R", "Line In"; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&userled_pins>; + + userled_pins: pinmux_userled_pins { + pinctrl-single,pins = < + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */ + 0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */ + 0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */ + 0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */ + >; + }; + + can_bus_pins: pinmux_can_bus_pins { + pinctrl-single,pins = < + 0x120 0x31 /* DCAN0_RX MODE1 */ + 0x11c 0x01 /* DCAN0_TX MODE1 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + emac_rmii1_pins: pinmux_emac_rmii1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 0x70 /* i2c0_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + 0x18c 0x70 /* i2c0_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 0x72 /*spi0_d1-i2c1_sda,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + 0x15c 0x72 /*spi0_cs0-i2c1_scl,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x150 0x72 /*spi0_scl.i2c2_sda,SLEWCTRL_SLOW | INPUT_PULLUP |MODE2*/ + 0x154 0x72 /*spi0_d0.i2c2_scl,SLEWCTRL_SLOW | INPUT_PULLUP | MODE2*/ + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x1A0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3_18 */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0F8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x0FC (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1A0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + tre_ehrpwm1_pins: pinmux_tre_ehrpwm1_pins { + pinctrl-single,pins = < + 0x48 0x06 /* PWM1A ~102 MODE6 */ + 0x4c 0x06 /* PWM1B ~103 MODE6 */ + >; + }; + + tre_ehrpwm2_pins: pinmux_tre_ehrpwm2_pins { + pinctrl-single,pins = < + 0x20 0x04 /* PWM2A ~100 MODE4 */ + 0x24 0x04 /* PWM2B ~101 MODE4 */ + >; + }; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + tre_audio_pins: pinmux_tre_audio_pins { + pinctrl-single,pins = < + 0x1ac 0x00 /*mcasp0_ahclkx (AUD_MCLK)->12MHz, INPUT | MODE0*/ + 0x190 0x20 /* mcasp0_aclkx (AUD_BCLK)->, INPUT | MODE0*/ + 0x194 0x20 /* mcasp0_fsx (AUD_FSX)-> , INPUT | MODE0*/ + 0x198 0x20 /* mcasp0_axr0 (AUD_DIN)<-, INPUT | MODE0*/ + 0x19c 0x22 /* mcasp0_ahclkr-_axr2 (AUD_DOUT)->, | MODE2*/ + >; + }; + + spi1_pins: pinmux_spi1_pins { + pinctrl-single,pins = < + 0x168 0x14 /* MOSI1 OUTPUT_PULLUP | MODE0 */ + 0x16c 0x34 /* MISO1 INPUT_PULLUP | MODE0 */ + 0x108 0x12 /* SCK1 OUTPUT_PULLUP | MODE0 */ + 0x164 0x12 /* SS1 OUTPUT_PULLUP | MODE0 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x180 0x30 /* UART1_rxd PULL_UP | MODE0 */ + 0x184 0x00 /* UART1_txd MODE0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x12c 0x31 /* UART2_rxd PULL_UP | MODE1 */ + 0x130 0x01 /* UART2_txd MODE1 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x70 0x36 /* UART4_rxd PULL_UP | MODE6 */ + 0x74 0x06 /* UART4_txd MODE6 */ + >; + }; +}; + +&dcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&can_bus_pins>; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + tps: tps@24 { + reg = <0x24>; + }; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + + tlv320aic3x: tlv320aic3x@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + status = "okay"; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <100000>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <100000>; +}; + +&epwmss1 { + status = "okay"; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm1_pins>; +}; + +&epwmss2 { + status = "okay"; +}; + +&ehrpwm2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&tre_ehrpwm2_pins>; +}; + +&lcdc { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + status = "okay"; +}; + +&usb { + status = "okay"; + + control@44e10620 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@47402000 { + status = "okay"; + }; +}; + +#include "tps65217.dtsi" + +&tps { + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.925V - 1.325V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.925V - 1.15V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-always-on; + }; + + rtc@44e3e000 { + ti,system-power-controller; + }; + }; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&tre_audio_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 2 0 1 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emac_rmii1_pins>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; +}; + +&phy_sel { + rmii-clock-ext; +}; + +&mmc1 { + status = "okay"; + bus-width = <0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + vmmc-supply = <&vmmcsd_fixed>; +}; + +&rtc { + system-power-controller; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone-argus.dtsi b/arch/arm/boot/dts/am335x-bone-argus.dtsi new file mode 100644 index 0000000000000..0bbe0507ef0ea --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-argus.dtsi @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/ { + ocp { + P8_07_pinmux { + /* gpio2[2] */ + status = "disabled"; + }; + P8_08_pinmux { + /* gpio2[3] */ + status = "disabled"; + }; + P8_09_pinmux { + /* gpio2[5] */ + status = "disabled"; + }; + P8_10_pinmux { + /* gpio2[4] */ + status = "disabled"; + }; + P9_11_pinmux { + /* gpio0[30] */ + status = "disabled"; + }; + P9_17_pinmux { + /* gpio0[5] */ + status = "disabled"; + }; + P9_18_pinmux { + /* gpio0[4] */ + status = "disabled"; + }; + P9_41_pinmux { + /* gpio0[20] */ + status = "disabled"; + }; + P9_42_pinmux { + /* gpio0[7] */ + status = "disabled"; + }; + }; +}; +/ { + argus-ups { + compatible = "argus-ups"; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&argus_ups_pins>; /* Refer to previous label */ + /* This section communicates the gpio numbers to the driver module */ + /* Note that gpio controllers appear to be numbered from 1-n here rather than 0-(n-1)????? */ + gpios = <&gpio0 30 0>, /* Request */ + <&gpio0 5 0>, /* Acknowledge */ + <&gpio0 4 0>, /* Watchdog */ + <&gpio2 2 0>, /* LED 1 Green */ + <&gpio2 3 0>, /* LED 1 Red */ + <&gpio2 5 0>, /* LED 2 Green */ + <&gpio2 4 0>, /* LED 2 Red */ + <&gpio0 20 0>, /* General Output #1 */ + <&gpio0 7 0>; /* General Output #2 */ + debug = <1>; + shutdown = <1>; + }; +}; + +&am33xx_pinmux { + argus_ups_pins: pinmux_argus_ups_pins { /* Set up pinmux */ + pinctrl-single,pins = < + 0x070 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + 0x15c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_cs0.gpio0_5 */ + 0x158 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* spi0_d1.gpio0_4 */ + 0x090 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_advn_ale.gpio_2 */ + 0x094 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_oen_ren.gpio2_3 */ + 0x09c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ben0_cle.gpio2_5 */ + 0x098 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_gpmc_wen.gpio2_4 */ + 0x1b4 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0_20 */ + 0x164 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common-universal.dtsi b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi new file mode 100644 index 0000000000000..781e33fe3d269 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone-common-universal.dtsi @@ -0,0 +1,2052 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&am33xx_pinmux { + /************************/ + /* P8 Header */ + /************************/ + + /* P8_01 GND */ + /* P8_02 GND */ + /* P8_03 (ZCZ ball R9 ) emmc */ + /* P8_04 (ZCZ ball T9 ) emmc */ + /* P8_05 (ZCZ ball R8 ) emmc */ + /* P8_06 (ZCZ ball T8 ) emmc */ + + /* P8_07 (ZCZ ball R7 ) */ + P8_07_default_pin: pinmux_P8_07_default_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pin: pinmux_P8_07_gpio_pin { + pinctrl-single,pins = <0x090 0x2F>; }; /* Mode 7, RxActive */ + P8_07_gpio_pu_pin: pinmux_P8_07_gpio_pu_pin { + pinctrl-single,pins = <0x090 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_07_gpio_pd_pin: pinmux_P8_07_gpio_pd_pin { + pinctrl-single,pins = <0x090 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_07_timer_pin: pinmux_P8_07_timer_pin { + pinctrl-single,pins = <0x090 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_08 (ZCZ ball T7 ) */ + P8_08_default_pin: pinmux_P8_08_default_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pin: pinmux_P8_08_gpio_pin { + pinctrl-single,pins = <0x094 0x2F>; }; /* Mode 7, RxActive */ + P8_08_gpio_pu_pin: pinmux_P8_08_gpio_pu_pin { + pinctrl-single,pins = <0x094 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_08_gpio_pd_pin: pinmux_P8_08_gpio_pd_pin { + pinctrl-single,pins = <0x094 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_08_timer_pin: pinmux_P8_08_timer_pin { + pinctrl-single,pins = <0x094 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_09 (ZCZ ball T6 ) */ + P8_09_default_pin: pinmux_P8_09_default_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pin: pinmux_P8_09_gpio_pin { + pinctrl-single,pins = <0x09c 0x2F>; }; /* Mode 7, RxActive */ + P8_09_gpio_pu_pin: pinmux_P8_09_gpio_pu_pin { + pinctrl-single,pins = <0x09c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_09_gpio_pd_pin: pinmux_P8_09_gpio_pd_pin { + pinctrl-single,pins = <0x09c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_09_timer_pin: pinmux_P8_09_timer_pin { + pinctrl-single,pins = <0x09c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_10 (ZCZ ball U6 ) */ + P8_10_default_pin: pinmux_P8_10_default_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pin: pinmux_P8_10_gpio_pin { + pinctrl-single,pins = <0x098 0x2F>; }; /* Mode 7, RxActive */ + P8_10_gpio_pu_pin: pinmux_P8_10_gpio_pu_pin { + pinctrl-single,pins = <0x098 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_10_gpio_pd_pin: pinmux_P8_10_gpio_pd_pin { + pinctrl-single,pins = <0x098 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_10_timer_pin: pinmux_P8_10_timer_pin { + pinctrl-single,pins = <0x098 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + + /* P8_11 (ZCZ ball R12) */ + P8_11_default_pin: pinmux_P8_11_default_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_gpio_pin: pinmux_P8_11_gpio_pin { + pinctrl-single,pins = <0x034 0x2F>; }; /* Mode 7, RxActive */ + P8_11_gpio_pu_pin: pinmux_P8_11_gpio_pu_pin { + pinctrl-single,pins = <0x034 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_11_gpio_pd_pin: pinmux_P8_11_gpio_pd_pin { + pinctrl-single,pins = <0x034 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_11_pruout_pin: pinmux_P8_11_pruout_pin { + pinctrl-single,pins = <0x034 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_11_qep_pin: pinmux_P8_11_qep_pin { + pinctrl-single,pins = <0x034 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_12 (ZCZ ball T12) */ + P8_12_default_pin: pinmux_P8_12_default_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_gpio_pin: pinmux_P8_12_gpio_pin { + pinctrl-single,pins = <0x030 0x2F>; }; /* Mode 7, RxActive */ + P8_12_gpio_pu_pin: pinmux_P8_12_gpio_pu_pin { + pinctrl-single,pins = <0x030 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_12_gpio_pd_pin: pinmux_P8_12_gpio_pd_pin { + pinctrl-single,pins = <0x030 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_12_pruout_pin: pinmux_P8_12_pruout_pin { + pinctrl-single,pins = <0x030 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_12_qep_pin: pinmux_P8_12_qep_pin { + pinctrl-single,pins = <0x030 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_13 (ZCZ ball T10) */ + P8_13_default_pin: pinmux_P8_13_default_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_gpio_pin: pinmux_P8_13_gpio_pin { + pinctrl-single,pins = <0x024 0x2F>; }; /* Mode 7, RxActive */ + P8_13_gpio_pu_pin: pinmux_P8_13_gpio_pu_pin { + pinctrl-single,pins = <0x024 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_13_gpio_pd_pin: pinmux_P8_13_gpio_pd_pin { + pinctrl-single,pins = <0x024 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_13_pwm_pin: pinmux_P8_13_pwm_pin { + pinctrl-single,pins = <0x024 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_14 (ZCZ ball T11) */ + P8_14_default_pin: pinmux_P8_14_default_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_gpio_pin: pinmux_P8_14_gpio_pin { + pinctrl-single,pins = <0x028 0x2F>; }; /* Mode 7, RxActive */ + P8_14_gpio_pu_pin: pinmux_P8_14_gpio_pu_pin { + pinctrl-single,pins = <0x028 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_14_gpio_pd_pin: pinmux_P8_14_gpio_pd_pin { + pinctrl-single,pins = <0x028 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_14_pwm_pin: pinmux_P8_14_pwm_pin { + pinctrl-single,pins = <0x028 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_15 (ZCZ ball U13) */ + P8_15_default_pin: pinmux_P8_15_default_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_gpio_pin: pinmux_P8_15_gpio_pin { + pinctrl-single,pins = <0x03c 0x2F>; }; /* Mode 7, RxActive */ + P8_15_gpio_pu_pin: pinmux_P8_15_gpio_pu_pin { + pinctrl-single,pins = <0x03c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_15_gpio_pd_pin: pinmux_P8_15_gpio_pd_pin { + pinctrl-single,pins = <0x03c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_15_pruin_pin: pinmux_P8_15_pruin_pin { + pinctrl-single,pins = <0x03c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_15_qep_pin: pinmux_P8_15_qep_pin { + pinctrl-single,pins = <0x03c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_16 (ZCZ ball V13) */ + P8_16_default_pin: pinmux_P8_16_default_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_gpio_pin: pinmux_P8_16_gpio_pin { + pinctrl-single,pins = <0x038 0x2F>; }; /* Mode 7, RxActive */ + P8_16_gpio_pu_pin: pinmux_P8_16_gpio_pu_pin { + pinctrl-single,pins = <0x038 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_16_gpio_pd_pin: pinmux_P8_16_gpio_pd_pin { + pinctrl-single,pins = <0x038 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_16_pruin_pin: pinmux_P8_16_pruin_pin { + pinctrl-single,pins = <0x038 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_16_qep_pin: pinmux_P8_16_qep_pin { + pinctrl-single,pins = <0x038 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_17 (ZCZ ball U12) */ + P8_17_default_pin: pinmux_P8_17_default_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_gpio_pin: pinmux_P8_17_gpio_pin { + pinctrl-single,pins = <0x02c 0x2F>; }; /* Mode 7, RxActive */ + P8_17_gpio_pu_pin: pinmux_P8_17_gpio_pu_pin { + pinctrl-single,pins = <0x02c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_17_gpio_pd_pin: pinmux_P8_17_gpio_pd_pin { + pinctrl-single,pins = <0x02c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_17_pwm_pin: pinmux_P8_17_pwm_pin { + pinctrl-single,pins = <0x02c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_18 (ZCZ ball V12) */ + P8_18_default_pin: pinmux_P8_18_default_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_18_gpio_pin: pinmux_P8_18_gpio_pin { + pinctrl-single,pins = <0x08c 0x2F>; }; /* Mode 7, RxActive */ + P8_18_gpio_pu_pin: pinmux_P8_18_gpio_pu_pin { + pinctrl-single,pins = <0x08c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_18_gpio_pd_pin: pinmux_P8_18_gpio_pd_pin { + pinctrl-single,pins = <0x08c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_19 (ZCZ ball U10) */ + P8_19_default_pin: pinmux_P8_19_default_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_gpio_pin: pinmux_P8_19_gpio_pin { + pinctrl-single,pins = <0x020 0x2F>; }; /* Mode 7, RxActive */ + P8_19_gpio_pu_pin: pinmux_P8_19_gpio_pu_pin { + pinctrl-single,pins = <0x020 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_19_gpio_pd_pin: pinmux_P8_19_gpio_pd_pin { + pinctrl-single,pins = <0x020 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_19_pwm_pin: pinmux_P8_19_pwm_pin { + pinctrl-single,pins = <0x020 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P8_20 (ZCZ ball V9 ) emmc */ + /* P8_21 (ZCZ ball U9 ) emmc */ + /* P8_22 (ZCZ ball V8 ) emmc */ + /* P8_23 (ZCZ ball U8 ) emmc */ + /* P8_24 (ZCZ ball V7 ) emmc */ + /* P8_25 (ZCZ ball U7 ) emmc */ + + /* P8_26 (ZCZ ball V6 ) */ + P8_26_default_pin: pinmux_P8_26_default_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pin: pinmux_P8_26_gpio_pin { + pinctrl-single,pins = <0x07c 0x2F>; }; /* Mode 7, RxActive */ + P8_26_gpio_pu_pin: pinmux_P8_26_gpio_pu_pin { + pinctrl-single,pins = <0x07c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_26_gpio_pd_pin: pinmux_P8_26_gpio_pd_pin { + pinctrl-single,pins = <0x07c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P8_27 (ZCZ ball U5 ) hdmi */ + P8_27_default_pin: pinmux_P8_27_default_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_gpio_pin: pinmux_P8_27_gpio_pin { + pinctrl-single,pins = <0x0e0 0x2F>; }; /* Mode 7, RxActive */ + P8_27_gpio_pu_pin: pinmux_P8_27_gpio_pu_pin { + pinctrl-single,pins = <0x0e0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_27_gpio_pd_pin: pinmux_P8_27_gpio_pd_pin { + pinctrl-single,pins = <0x0e0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_27_pruout_pin: pinmux_P8_27_pruout_pin { + pinctrl-single,pins = <0x0e0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_27_pruin_pin: pinmux_P8_27_pruin_pin { + pinctrl-single,pins = <0x0e0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_27_hdmi_pin: pinmux_P8_27_hdmi_pin { + pinctrl-single,pins = <0x0e0 0x00>; }; /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_28 (ZCZ ball V5 ) hdmi */ + P8_28_default_pin: pinmux_P8_28_default_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_gpio_pin: pinmux_P8_28_gpio_pin { + pinctrl-single,pins = <0x0e8 0x2F>; }; /* Mode 7, RxActive */ + P8_28_gpio_pu_pin: pinmux_P8_28_gpio_pu_pin { + pinctrl-single,pins = <0x0e8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_28_gpio_pd_pin: pinmux_P8_28_gpio_pd_pin { + pinctrl-single,pins = <0x0e8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_28_pruout_pin: pinmux_P8_28_pruout_pin { + pinctrl-single,pins = <0x0e8 0x05>; }; /* Mode 5, Pull-Down */ + P8_28_pruin_pin: pinmux_P8_28_pruin_pin { + pinctrl-single,pins = <0x0e8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_28_hdmi_pin: pinmux_P8_28_hdmi_pin { + pinctrl-single,pins = <0x0e8 0x00>; }; /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_29 (ZCZ ball R5 ) hdmi */ + P8_29_default_pin: pinmux_P8_29_default_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_gpio_pin: pinmux_P8_29_gpio_pin { + pinctrl-single,pins = <0x0e4 0x2F>; }; /* Mode 7, RxActive */ + P8_29_gpio_pu_pin: pinmux_P8_29_gpio_pu_pin { + pinctrl-single,pins = <0x0e4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_29_gpio_pd_pin: pinmux_P8_29_gpio_pd_pin { + pinctrl-single,pins = <0x0e4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_29_pruout_pin: pinmux_P8_29_pruout_pin { + pinctrl-single,pins = <0x0e4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_29_pruin_pin: pinmux_P8_29_pruin_pin { + pinctrl-single,pins = <0x0e4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_29_hdmi_pin: pinmux_P8_29_hdmi_pin { + pinctrl-single,pins = <0x0e4 0x00>; }; /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_30 (ZCZ ball R6 ) hdmi */ + P8_30_default_pin: pinmux_P8_30_default_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_gpio_pin: pinmux_P8_30_gpio_pin { + pinctrl-single,pins = <0x0ec 0x2F>; }; /* Mode 7, RxActive */ + P8_30_gpio_pu_pin: pinmux_P8_30_gpio_pu_pin { + pinctrl-single,pins = <0x0ec 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_30_gpio_pd_pin: pinmux_P8_30_gpio_pd_pin { + pinctrl-single,pins = <0x0ec 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_30_pruout_pin: pinmux_P8_30_pruout_pin { + pinctrl-single,pins = <0x0ec 0x05>; }; /* Mode 5, Pull-Down*/ + P8_30_pruin_pin: pinmux_P8_30_pruin_pin { + pinctrl-single,pins = <0x0ec 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_30_hdmi_pin: pinmux_P8_30_hdmi_pin { + pinctrl-single,pins = <0x0ec 0x00>; }; /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + + /* P8_31 (ZCZ ball V4 ) hdmi */ + P8_31_default_pin: pinmux_P8_31_default_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_gpio_pin: pinmux_P8_31_gpio_pin { + pinctrl-single,pins = <0x0d8 0x2F>; }; /* Mode 7, RxActive */ + P8_31_gpio_pu_pin: pinmux_P8_31_gpio_pu_pin { + pinctrl-single,pins = <0x0d8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_31_gpio_pd_pin: pinmux_P8_31_gpio_pd_pin { + pinctrl-single,pins = <0x0d8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_31_uart_pin: pinmux_P8_31_uart_pin { + pinctrl-single,pins = <0x0d8 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_31_hdmi_pin: pinmux_P8_31_hdmi_pin { + pinctrl-single,pins = <0x0d8 0x08>; }; /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_32 (ZCZ ball T5 ) hdmi */ + P8_32_default_pin: pinmux_P8_32_default_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_gpio_pin: pinmux_P8_32_gpio_pin { + pinctrl-single,pins = <0x0dc 0x2F>; }; /* Mode 7, RxActive */ + P8_32_gpio_pu_pin: pinmux_P8_32_gpio_pu_pin { + pinctrl-single,pins = <0x0dc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_32_gpio_pd_pin: pinmux_P8_32_gpio_pd_pin { + pinctrl-single,pins = <0x0dc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_32_uart_pin: pinmux_P8_32_uart_pin { + pinctrl-single,pins = <0x0dc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_32_hdmi_pin: pinmux_P8_32_hdmi_pin { + pinctrl-single,pins = <0x0dc 0x08>; }; /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_33 (ZCZ ball V3 ) hdmi */ + P8_33_default_pin: pinmux_P8_33_default_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_gpio_pin: pinmux_P8_33_gpio_pin { + pinctrl-single,pins = <0x0d4 0x2F>; }; /* Mode 7, RxActive */ + P8_33_gpio_pu_pin: pinmux_P8_33_gpio_pu_pin { + pinctrl-single,pins = <0x0d4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_33_gpio_pd_pin: pinmux_P8_33_gpio_pd_pin { + pinctrl-single,pins = <0x0d4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_33_hdmi_pin: pinmux_P8_33_hdmi_pin { + pinctrl-single,pins = <0x0d4 0x08>; }; /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_34 (ZCZ ball U4 ) hdmi */ + P8_34_default_pin: pinmux_P8_34_default_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_gpio_pin: pinmux_P8_34_gpio_pin { + pinctrl-single,pins = <0x0cc 0x2F>; }; /* Mode 7, RxActive */ + P8_34_gpio_pu_pin: pinmux_P8_34_gpio_pu_pin { + pinctrl-single,pins = <0x0cc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_34_gpio_pd_pin: pinmux_P8_34_gpio_pd_pin { + pinctrl-single,pins = <0x0cc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_34_pwm_pin: pinmux_P8_34_pwm_pin { + pinctrl-single,pins = <0x0cc 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_34_hdmi_pin: pinmux_P8_34_hdmi_pin { + pinctrl-single,pins = <0x0cc 0x08>; }; /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_35 (ZCZ ball V2 ) hdmi */ + P8_35_default_pin: pinmux_P8_35_default_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_gpio_pin: pinmux_P8_35_gpio_pin { + pinctrl-single,pins = <0x0d0 0x2F>; }; /* Mode 7, RxActive */ + P8_35_gpio_pu_pin: pinmux_P8_35_gpio_pu_pin { + pinctrl-single,pins = <0x0d0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_35_gpio_pd_pin: pinmux_P8_35_gpio_pd_pin { + pinctrl-single,pins = <0x0d0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_35_hdmi_pin: pinmux_P8_35_hdmi_pin { + pinctrl-single,pins = <0x0d0 0x08>; }; /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_36 (ZCZ ball U3 ) hdmi */ + P8_36_default_pin: pinmux_P8_36_default_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_gpio_pin: pinmux_P8_36_gpio_pin { + pinctrl-single,pins = <0x0c8 0x2F>; }; /* Mode 7, RxActive */ + P8_36_gpio_pu_pin: pinmux_P8_36_gpio_pu_pin { + pinctrl-single,pins = <0x0c8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_36_gpio_pd_pin: pinmux_P8_36_gpio_pd_pin { + pinctrl-single,pins = <0x0c8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_36_pwm_pin: pinmux_P8_36_pwm_pin { + pinctrl-single,pins = <0x0c8 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_36_hdmi_pin: pinmux_P8_36_hdmi_pin { + pinctrl-single,pins = <0x0c8 0x08>; }; /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_37 (ZCZ ball U1 ) hdmi */ + P8_37_default_pin: pinmux_P8_37_default_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_gpio_pin: pinmux_P8_37_gpio_pin { + pinctrl-single,pins = <0x0c0 0x2F>; }; /* Mode 7, RxActive */ + P8_37_gpio_pu_pin: pinmux_P8_37_gpio_pu_pin { + pinctrl-single,pins = <0x0c0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_37_gpio_pd_pin: pinmux_P8_37_gpio_pd_pin { + pinctrl-single,pins = <0x0c0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_37_uart_pin: pinmux_P8_37_uart_pin { + pinctrl-single,pins = <0x0c0 0x04>; }; /* Mode 4, Pull-Down*/ + P8_37_pwm_pin: pinmux_P8_37_pwm_pin { + pinctrl-single,pins = <0x0c0 0x02>; }; /* Mode 2, Pull-Down*/ + P8_37_hdmi_pin: pinmux_P8_37_hdmi_pin { + pinctrl-single,pins = <0x0c0 0x08>; }; /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_38 (ZCZ ball U2 ) hdmi */ + P8_38_default_pin: pinmux_P8_38_default_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_gpio_pin: pinmux_P8_38_gpio_pin { + pinctrl-single,pins = <0x0c4 0x2F>; }; /* Mode 7, RxActive */ + P8_38_gpio_pu_pin: pinmux_P8_38_gpio_pu_pin { + pinctrl-single,pins = <0x0c4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_38_gpio_pd_pin: pinmux_P8_38_gpio_pd_pin { + pinctrl-single,pins = <0x0c4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_38_uart_pin: pinmux_P8_38_uart_pin { + pinctrl-single,pins = <0x0c4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P8_38_pwm_pin: pinmux_P8_38_pwm_pin { + pinctrl-single,pins = <0x0c4 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P8_38_hdmi_pin: pinmux_P8_38_hdmi_pin { + pinctrl-single,pins = <0x0c4 0x08>; }; /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + + /* P8_39 (ZCZ ball T3 ) hdmi */ + P8_39_default_pin: pinmux_P8_39_default_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_gpio_pin: pinmux_P8_39_gpio_pin { + pinctrl-single,pins = <0x0b8 0x2F>; }; /* Mode 7, RxActive */ + P8_39_gpio_pu_pin: pinmux_P8_39_gpio_pu_pin { + pinctrl-single,pins = <0x0b8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_39_gpio_pd_pin: pinmux_P8_39_gpio_pd_pin { + pinctrl-single,pins = <0x0b8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_39_pruout_pin: pinmux_P8_39_pruout_pin { + pinctrl-single,pins = <0x0b8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_39_pruin_pin: pinmux_P8_39_pruin_pin { + pinctrl-single,pins = <0x0b8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_39_hdmi_pin: pinmux_P8_39_hdmi_pin { + pinctrl-single,pins = <0x0b8 0x08>; }; /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_40 (ZCZ ball T4 ) hdmi */ + P8_40_default_pin: pinmux_P8_40_default_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_gpio_pin: pinmux_P8_40_gpio_pin { + pinctrl-single,pins = <0x0bc 0x2F>; }; /* Mode 7, RxActive */ + P8_40_gpio_pu_pin: pinmux_P8_40_gpio_pu_pin { + pinctrl-single,pins = <0x0bc 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_40_gpio_pd_pin: pinmux_P8_40_gpio_pd_pin { + pinctrl-single,pins = <0x0bc 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_40_pruout_pin: pinmux_P8_40_pruout_pin { + pinctrl-single,pins = <0x0bc 0x05>; }; /* Mode 5, Pull-Down*/ + P8_40_pruin_pin: pinmux_P8_40_pruin_pin { + pinctrl-single,pins = <0x0bc 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_40_hdmi_pin: pinmux_P8_40_hdmi_pin { + pinctrl-single,pins = <0x0bc 0x08>; }; /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_41 (ZCZ ball T1 ) hdmi */ + P8_41_default_pin: pinmux_P8_41_default_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_gpio_pin: pinmux_P8_41_gpio_pin { + pinctrl-single,pins = <0x0b0 0x2F>; }; /* Mode 7, RxActive */ + P8_41_gpio_pu_pin: pinmux_P8_41_gpio_pu_pin { + pinctrl-single,pins = <0x0b0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_41_gpio_pd_pin: pinmux_P8_41_gpio_pd_pin { + pinctrl-single,pins = <0x0b0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_41_pruout_pin: pinmux_P8_41_pruout_pin { + pinctrl-single,pins = <0x0b0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_41_pruin_pin: pinmux_P8_41_pruin_pin { + pinctrl-single,pins = <0x0b0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_41_hdmi_pin: pinmux_P8_41_hdmi_pin { + pinctrl-single,pins = <0x0b0 0x08>; }; /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_42 (ZCZ ball T2 ) hdmi */ + P8_42_default_pin: pinmux_P8_42_default_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_gpio_pin: pinmux_P8_42_gpio_pin { + pinctrl-single,pins = <0x0b4 0x2F>; }; /* Mode 7, RxActive */ + P8_42_gpio_pu_pin: pinmux_P8_42_gpio_pu_pin { + pinctrl-single,pins = <0x0b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_42_gpio_pd_pin: pinmux_P8_42_gpio_pd_pin { + pinctrl-single,pins = <0x0b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_42_pruout_pin: pinmux_P8_42_pruout_pin { + pinctrl-single,pins = <0x0b4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_42_pruin_pin: pinmux_P8_42_pruin_pin { + pinctrl-single,pins = <0x0b4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_42_hdmi_pin: pinmux_P8_42_hdmi_pin { + pinctrl-single,pins = <0x0b4 0x08>; }; /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_43 (ZCZ ball R3 ) hdmi */ + P8_43_default_pin: pinmux_P8_43_default_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_gpio_pin: pinmux_P8_43_gpio_pin { + pinctrl-single,pins = <0x0a8 0x2F>; }; /* Mode 7, RxActive */ + P8_43_gpio_pu_pin: pinmux_P8_43_gpio_pu_pin { + pinctrl-single,pins = <0x0a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_43_gpio_pd_pin: pinmux_P8_43_gpio_pd_pin { + pinctrl-single,pins = <0x0a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_43_pruout_pin: pinmux_P8_43_pruout_pin { + pinctrl-single,pins = <0x0a8 0x05>; }; /* Mode 5, Pull-Down*/ + P8_43_pruin_pin: pinmux_P8_43_pruin_pin { + pinctrl-single,pins = <0x0a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_43_pwm_pin: pinmux_P8_43_pwm_pin { + pinctrl-single,pins = <0x0a8 0x03>; }; /* Mode 3, Pull-Down */ + P8_43_hdmi_pin: pinmux_P8_43_hdmi_pin { + pinctrl-single,pins = <0x0a8 0x08>; }; /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_44 (ZCZ ball R4 ) hdmi */ + P8_44_default_pin: pinmux_P8_44_default_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_gpio_pin: pinmux_P8_44_gpio_pin { + pinctrl-single,pins = <0x0ac 0x2F>; }; /* Mode 7, RxActive */ + P8_44_gpio_pu_pin: pinmux_P8_44_gpio_pu_pin { + pinctrl-single,pins = <0x0ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_44_gpio_pd_pin: pinmux_P8_44_gpio_pd_pin { + pinctrl-single,pins = <0x0ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_44_pruout_pin: pinmux_P8_44_pruout_pin { + pinctrl-single,pins = <0x0ac 0x05>; }; /* Mode 5, Pull-Down*/ + P8_44_pruin_pin: pinmux_P8_44_pruin_pin { + pinctrl-single,pins = <0x0ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_44_pwm_pin: pinmux_P8_44_pwm_pin { + pinctrl-single,pins = <0x0ac 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P8_44_hdmi_pin: pinmux_P8_44_hdmi_pin { + pinctrl-single,pins = <0x0ac 0x08>; }; /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_45 (ZCZ ball R1 ) hdmi */ + P8_45_default_pin: pinmux_P8_45_default_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_gpio_pin: pinmux_P8_45_gpio_pin { + pinctrl-single,pins = <0x0a0 0x2F>; }; /* Mode 7, RxActive */ + P8_45_gpio_pu_pin: pinmux_P8_45_gpio_pu_pin { + pinctrl-single,pins = <0x0a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_45_gpio_pd_pin: pinmux_P8_45_gpio_pd_pin { + pinctrl-single,pins = <0x0a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_45_pruout_pin: pinmux_P8_45_pruout_pin { + pinctrl-single,pins = <0x0a0 0x05>; }; /* Mode 5, Pull-Down*/ + P8_45_pruin_pin: pinmux_P8_45_pruin_pin { + pinctrl-single,pins = <0x0a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_45_pwm_pin: pinmux_P8_45_pwm_pin { + pinctrl-single,pins = <0x0a0 0x03>; }; /* Mode 3, Pull-Down*/ + P8_45_hdmi_pin: pinmux_P8_45_hdmi_pin { + pinctrl-single,pins = <0x0a0 0x08>; }; /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /* P8_46 (ZCZ ball R2 ) hdmi */ + P8_46_default_pin: pinmux_P8_46_default_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_gpio_pin: pinmux_P8_46_gpio_pin { + pinctrl-single,pins = <0x0a4 0x2F>; }; /* Mode 7, RxActive */ + P8_46_gpio_pu_pin: pinmux_P8_46_gpio_pu_pin { + pinctrl-single,pins = <0x0a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P8_46_gpio_pd_pin: pinmux_P8_46_gpio_pd_pin { + pinctrl-single,pins = <0x0a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P8_46_pruout_pin: pinmux_P8_46_pruout_pin { + pinctrl-single,pins = <0x0a4 0x05>; }; /* Mode 5, Pull-Down*/ + P8_46_pruin_pin: pinmux_P8_46_pruin_pin { + pinctrl-single,pins = <0x0a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P8_46_pwm_pin: pinmux_P8_46_pwm_pin { + pinctrl-single,pins = <0x0a4 0x03>; }; /* Mode 3, Pull-Down*/ + P8_46_hdmi_pin: pinmux_P8_46_hdmi_pin { + pinctrl-single,pins = <0x0a4 0x08>; }; /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + + /************************/ + /* P9 Header */ + /************************/ + + /* P9_01 GND */ + /* P9_02 GND */ + /* P9_03 3.3V */ + /* P9_04 3.3V */ + /* P9_05 VDD_5V */ + /* P9_06 VDD_5V */ + /* P9_07 SYS_5V */ + /* P9_08 SYS_5V */ + /* P9_09 PWR_BUT */ + /* P9_10 (ZCZ ball A10) RESETn */ + + /* P9_11 (ZCZ ball T17) */ + P9_11_default_pin: pinmux_P9_11_default_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pin: pinmux_P9_11_gpio_pin { + pinctrl-single,pins = <0x070 0x2F>; }; /* Mode 7, RxActive */ + P9_11_gpio_pu_pin: pinmux_P9_11_gpio_pu_pin { + pinctrl-single,pins = <0x070 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_11_gpio_pd_pin: pinmux_P9_11_gpio_pd_pin { + pinctrl-single,pins = <0x070 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_11_uart_pin: pinmux_P9_11_uart_pin { + pinctrl-single,pins = <0x070 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_12 (ZCZ ball U18) */ + P9_12_default_pin: pinmux_P9_12_default_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pin: pinmux_P9_12_gpio_pin { + pinctrl-single,pins = <0x078 0x2F>; }; /* Mode 7, RxActive */ + P9_12_gpio_pu_pin: pinmux_P9_12_gpio_pu_pin { + pinctrl-single,pins = <0x078 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_12_gpio_pd_pin: pinmux_P9_12_gpio_pd_pin { + pinctrl-single,pins = <0x078 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + + /* P9_13 (ZCZ ball U17) */ + P9_13_default_pin: pinmux_P9_13_default_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pin: pinmux_P9_13_gpio_pin { + pinctrl-single,pins = <0x074 0x2F>; }; /* Mode 7, RxActive */ + P9_13_gpio_pu_pin: pinmux_P9_13_gpio_pu_pin { + pinctrl-single,pins = <0x074 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_13_gpio_pd_pin: pinmux_P9_13_gpio_pd_pin { + pinctrl-single,pins = <0x074 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_13_uart_pin: pinmux_P9_13_uart_pin { + pinctrl-single,pins = <0x074 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_14 (ZCZ ball U14) */ + P9_14_default_pin: pinmux_P9_14_default_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_gpio_pin: pinmux_P9_14_gpio_pin { + pinctrl-single,pins = <0x048 0x2F>; }; /* Mode 7, RxActive */ + P9_14_gpio_pu_pin: pinmux_P9_14_gpio_pu_pin { + pinctrl-single,pins = <0x048 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_14_gpio_pd_pin: pinmux_P9_14_gpio_pd_pin { + pinctrl-single,pins = <0x048 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_14_pwm_pin: pinmux_P9_14_pwm_pin { + pinctrl-single,pins = <0x048 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_15 (ZCZ ball R13) */ + P9_15_default_pin: pinmux_P9_15_default_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_gpio_pin: pinmux_P9_15_gpio_pin { + pinctrl-single,pins = <0x040 0x2F>; }; /* Mode 7, RxActive */ + P9_15_gpio_pu_pin: pinmux_P9_15_gpio_pu_pin { + pinctrl-single,pins = <0x040 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_15_gpio_pd_pin: pinmux_P9_15_gpio_pd_pin { + pinctrl-single,pins = <0x040 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_15_pwm_pin: pinmux_P9_15_pwm_pin { + pinctrl-single,pins = <0x040 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_16 (ZCZ ball T14) */ + P9_16_default_pin: pinmux_P9_16_default_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_gpio_pin: pinmux_P9_16_gpio_pin { + pinctrl-single,pins = <0x04c 0x2F>; }; /* Mode 7, RxActive */ + P9_16_gpio_pu_pin: pinmux_P9_16_gpio_pu_pin { + pinctrl-single,pins = <0x04c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_16_gpio_pd_pin: pinmux_P9_16_gpio_pd_pin { + pinctrl-single,pins = <0x04c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_16_pwm_pin: pinmux_P9_16_pwm_pin { + pinctrl-single,pins = <0x04c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_17 (ZCZ ball A16) */ + P9_17_default_pin: pinmux_P9_17_default_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pin: pinmux_P9_17_gpio_pin { + pinctrl-single,pins = <0x15c 0x2F>; }; /* Mode 7, RxActive */ + P9_17_gpio_pu_pin: pinmux_P9_17_gpio_pu_pin { + pinctrl-single,pins = <0x15c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_17_gpio_pd_pin: pinmux_P9_17_gpio_pd_pin { + pinctrl-single,pins = <0x15c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_17_spi_pin: pinmux_P9_17_spi_pin { + pinctrl-single,pins = <0x15c 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_17_i2c_pin: pinmux_P9_17_i2c_pin { + pinctrl-single,pins = <0x15c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_17_pwm_pin: pinmux_P9_17_pwm_pin { + pinctrl-single,pins = <0x15c 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_18 (ZCZ ball B16) */ + P9_18_default_pin: pinmux_P9_18_default_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pin: pinmux_P9_18_gpio_pin { + pinctrl-single,pins = <0x158 0x2F>; }; /* Mode 7, RxActive */ + P9_18_gpio_pu_pin: pinmux_P9_18_gpio_pu_pin { + pinctrl-single,pins = <0x158 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_18_gpio_pd_pin: pinmux_P9_18_gpio_pd_pin { + pinctrl-single,pins = <0x158 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_18_spi_pin: pinmux_P9_18_spi_pin { + pinctrl-single,pins = <0x158 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_18_i2c_pin: pinmux_P9_18_i2c_pin { + pinctrl-single,pins = <0x158 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_18_pwm_pin: pinmux_P9_18_pwm_pin { + pinctrl-single,pins = <0x158 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_19 (ZCZ ball D17) */ + P9_19_default_pin: pinmux_P9_19_default_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pin: pinmux_P9_19_gpio_pin { + pinctrl-single,pins = <0x17c 0x2F>; }; /* Mode 7, RxActive */ + P9_19_gpio_pu_pin: pinmux_P9_19_gpio_pu_pin { + pinctrl-single,pins = <0x17c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_19_gpio_pd_pin: pinmux_P9_19_gpio_pd_pin { + pinctrl-single,pins = <0x17c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_19_can_pin: pinmux_P9_19_can_pin { + pinctrl-single,pins = <0x17c 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_19_i2c_pin: pinmux_P9_19_i2c_pin { + pinctrl-single,pins = <0x17c 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_20 (ZCZ ball D18) */ + P9_20_default_pin: pinmux_P9_20_default_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pin: pinmux_P9_20_gpio_pin { + pinctrl-single,pins = <0x178 0x2F>; }; /* Mode 7, RxActive */ + P9_20_gpio_pu_pin: pinmux_P9_20_gpio_pu_pin { + pinctrl-single,pins = <0x178 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_20_gpio_pd_pin: pinmux_P9_20_gpio_pd_pin { + pinctrl-single,pins = <0x178 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_20_can_pin: pinmux_P9_20_can_pin { + pinctrl-single,pins = <0x178 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_20_i2c_pin: pinmux_P9_20_i2c_pin { + pinctrl-single,pins = <0x178 0x73>; }; /* (SLEWCTRL_SLOW | PIN_INPUT_PULLUP | MUX_MODE3) */ + + /* P9_21 (ZCZ ball B17) */ + P9_21_default_pin: pinmux_P9_21_default_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pin: pinmux_P9_21_gpio_pin { + pinctrl-single,pins = <0x154 0x2F>; }; /* Mode 7, RxActive */ + P9_21_gpio_pu_pin: pinmux_P9_21_gpio_pu_pin { + pinctrl-single,pins = <0x154 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_21_gpio_pd_pin: pinmux_P9_21_gpio_pd_pin { + pinctrl-single,pins = <0x154 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_21_spi_pin: pinmux_P9_21_spi_pin { + pinctrl-single,pins = <0x154 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_21_uart_pin: pinmux_P9_21_uart_pin { + pinctrl-single,pins = <0x154 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_21_i2c_pin: pinmux_P9_21_i2c_pin { + pinctrl-single,pins = <0x154 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_21_pwm_pin: pinmux_P9_21_pwm_pin { + pinctrl-single,pins = <0x154 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_22 (ZCZ ball A17) */ + P9_22_default_pin: pinmux_P9_22_default_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pin: pinmux_P9_22_gpio_pin { + pinctrl-single,pins = <0x150 0x2F>; }; /* Mode 7, RxActive */ + P9_22_gpio_pu_pin: pinmux_P9_22_gpio_pu_pin { + pinctrl-single,pins = <0x150 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_22_gpio_pd_pin: pinmux_P9_22_gpio_pd_pin { + pinctrl-single,pins = <0x150 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_22_spi_pin: pinmux_P9_22_spi_pin { + pinctrl-single,pins = <0x150 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_22_uart_pin: pinmux_P9_22_uart_pin { + pinctrl-single,pins = <0x150 0x31>; }; /* Mode 1, Pull-Up, RxActive */ + P9_22_i2c_pin: pinmux_P9_22_i2c_pin { + pinctrl-single,pins = <0x150 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_22_pwm_pin: pinmux_P9_22_pwm_pin { + pinctrl-single,pins = <0x150 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + + /* P9_23 (ZCZ ball V14) */ + P9_23_default_pin: pinmux_P9_23_default_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_gpio_pin: pinmux_P9_23_gpio_pin { + pinctrl-single,pins = <0x044 0x2F>; }; /* Mode 7, RxActive */ + P9_23_gpio_pu_pin: pinmux_P9_23_gpio_pu_pin { + pinctrl-single,pins = <0x044 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_23_gpio_pd_pin: pinmux_P9_23_gpio_pd_pin { + pinctrl-single,pins = <0x044 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_23_pwm_pin: pinmux_P9_23_pwm_pin { + pinctrl-single,pins = <0x044 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_24 (ZCZ ball D15) */ + P9_24_default_pin: pinmux_P9_24_default_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pin: pinmux_P9_24_gpio_pin { + pinctrl-single,pins = <0x184 0x2F>; }; /* Mode 7, RxActive */ + P9_24_gpio_pu_pin: pinmux_P9_24_gpio_pu_pin { + pinctrl-single,pins = <0x184 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_24_gpio_pd_pin: pinmux_P9_24_gpio_pd_pin { + pinctrl-single,pins = <0x184 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_24_uart_pin: pinmux_P9_24_uart_pin { + pinctrl-single,pins = <0x184 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_24_can_pin: pinmux_P9_24_can_pin { + pinctrl-single,pins = <0x184 0x32>; }; /* Mode 2, Pull-Up, RxActive */ + P9_24_i2c_pin: pinmux_P9_24_i2c_pin { + pinctrl-single,pins = <0x184 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_24_pruin_pin: pinmux_P9_24_pruin_pin { + pinctrl-single,pins = <0x184 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_25 (ZCZ ball A14) Audio */ + P9_25_default_pin: pinmux_P9_25_default_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_gpio_pin: pinmux_P9_25_gpio_pin { + pinctrl-single,pins = <0x1ac 0x2F>; }; /* Mode 7, RxActive */ + P9_25_gpio_pu_pin: pinmux_P9_25_gpio_pu_pin { + pinctrl-single,pins = <0x1ac 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_25_gpio_pd_pin: pinmux_P9_25_gpio_pd_pin { + pinctrl-single,pins = <0x1ac 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_25_qep_pin: pinmux_P9_25_qep_pin { + pinctrl-single,pins = <0x1ac 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_25_pruout_pin: pinmux_P9_25_pruout_pin { + pinctrl-single,pins = <0x1ac 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_25_pruin_pin: pinmux_P9_25_pruin_pin { + pinctrl-single,pins = <0x1ac 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_25_audio_pin: pinmux_P9_25_audio_pin { + pinctrl-single,pins = <0x1ac (PIN_INPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_ahclkx.mcasp0_ahclkx */ + + /* P9_26 (ZCZ ball D16) */ + P9_26_default_pin: pinmux_P9_26_default_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pin: pinmux_P9_26_gpio_pin { + pinctrl-single,pins = <0x180 0x2F>; }; /* Mode 7, RxActive */ + P9_26_gpio_pu_pin: pinmux_P9_26_gpio_pu_pin { + pinctrl-single,pins = <0x180 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_26_gpio_pd_pin: pinmux_P9_26_gpio_pd_pin { + pinctrl-single,pins = <0x180 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_26_uart_pin: pinmux_P9_26_uart_pin { + pinctrl-single,pins = <0x180 0x30>; }; /* Mode 0, Pull-Up, RxActive */ + P9_26_can_pin: pinmux_P9_26_can_pin { + pinctrl-single,pins = <0x180 0x12>; }; /* Mode 2, Pull-Up, RxActive */ + P9_26_i2c_pin: pinmux_P9_26_i2c_pin { + pinctrl-single,pins = <0x180 0x33>; }; /* Mode 3, Pull-Up, RxActive */ + P9_26_pruin_pin: pinmux_P9_26_pruin_pin { + pinctrl-single,pins = <0x180 0x36>; }; /* Mode 6, Pull-Up, RxActive */ + + /* P9_27 (ZCZ ball C13) */ + P9_27_default_pin: pinmux_P9_27_default_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_gpio_pin: pinmux_P9_27_gpio_pin { + pinctrl-single,pins = <0x1a4 0x2F>; }; /* Mode 7, RxActive */ + P9_27_gpio_pu_pin: pinmux_P9_27_gpio_pu_pin { + pinctrl-single,pins = <0x1a4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_27_gpio_pd_pin: pinmux_P9_27_gpio_pd_pin { + pinctrl-single,pins = <0x1a4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_27_qep_pin: pinmux_P9_27_qep_pin { + pinctrl-single,pins = <0x1a4 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_27_pruout_pin: pinmux_P9_27_pruout_pin { + pinctrl-single,pins = <0x1a4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_27_pruin_pin: pinmux_P9_27_pruin_pin { + pinctrl-single,pins = <0x1a4 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_28 (ZCZ ball C12) Audio */ + P9_28_default_pin: pinmux_P9_28_default_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_gpio_pin: pinmux_P9_28_gpio_pin { + pinctrl-single,pins = <0x19c 0x2F>; }; /* Mode 7, RxActive */ + P9_28_gpio_pu_pin: pinmux_P9_28_gpio_pu_pin { + pinctrl-single,pins = <0x19c 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_28_gpio_pd_pin: pinmux_P9_28_gpio_pd_pin { + pinctrl-single,pins = <0x19c 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_28_pwm_pin: pinmux_P9_28_pwm_pin { + pinctrl-single,pins = <0x19c 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_28_spi_pin: pinmux_P9_28_spi_pin { + pinctrl-single,pins = <0x19c 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_28_pwm2_pin: pinmux_P9_28_pwm2_pin { + pinctrl-single,pins = <0x19c 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_28_pruout_pin: pinmux_P9_28_pruout_pin { + pinctrl-single,pins = <0x19c 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_28_pruin_pin: pinmux_P9_28_pruin_pin { + pinctrl-single,pins = <0x19c 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_28_audio_pin: pinmux_P9_28_audio_pin { + pinctrl-single,pins = <0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)>; }; /* mcasp0_ahclkr.mcasp0_axr2 */ + + /* P9_29 (ZCZ ball B13) Audio */ + P9_29_default_pin: pinmux_P9_29_default_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_gpio_pin: pinmux_P9_29_gpio_pin { + pinctrl-single,pins = <0x194 0x2F>; }; /* Mode 7, RxActive */ + P9_29_gpio_pu_pin: pinmux_P9_29_gpio_pu_pin { + pinctrl-single,pins = <0x194 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_29_gpio_pd_pin: pinmux_P9_29_gpio_pd_pin { + pinctrl-single,pins = <0x194 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_29_pwm_pin: pinmux_P9_29_pwm_pin { + pinctrl-single,pins = <0x194 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_29_spi_pin: pinmux_P9_29_spi_pin { + pinctrl-single,pins = <0x194 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_29_pruout_pin: pinmux_P9_29_pruout_pin { + pinctrl-single,pins = <0x194 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_29_pruin_pin: pinmux_P9_29_pruin_pin { + pinctrl-single,pins = <0x194 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_29_audio_pin: pinmux_P9_29_audio_pin { + pinctrl-single,pins = <0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0)>; }; /* mcasp0_fsx.mcasp0_fsx */ + + /* P9_30 (ZCZ ball D12) */ + P9_30_default_pin: pinmux_P9_30_default_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_gpio_pin: pinmux_P9_30_gpio_pin { + pinctrl-single,pins = <0x198 0x2F>; }; /* Mode 7, RxActive */ + P9_30_gpio_pu_pin: pinmux_P9_30_gpio_pu_pin { + pinctrl-single,pins = <0x198 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_30_gpio_pd_pin: pinmux_P9_30_gpio_pd_pin { + pinctrl-single,pins = <0x198 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_30_pwm_pin: pinmux_P9_30_pwm_pin { + pinctrl-single,pins = <0x198 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_30_spi_pin: pinmux_P9_30_spi_pin { + pinctrl-single,pins = <0x198 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_30_pruout_pin: pinmux_P9_30_pruout_pin { + pinctrl-single,pins = <0x198 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_30_pruin_pin: pinmux_P9_30_pruin_pin { + pinctrl-single,pins = <0x198 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_31 (ZCZ ball A13) Audio */ + P9_31_default_pin: pinmux_P9_31_default_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_gpio_pin: pinmux_P9_31_gpio_pin { + pinctrl-single,pins = <0x190 0x2F>; }; /* Mode 7, RxActive */ + P9_31_gpio_pu_pin: pinmux_P9_31_gpio_pu_pin { + pinctrl-single,pins = <0x190 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_31_gpio_pd_pin: pinmux_P9_31_gpio_pd_pin { + pinctrl-single,pins = <0x190 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_31_pwm_pin: pinmux_P9_31_pwm_pin { + pinctrl-single,pins = <0x190 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_31_spi_pin: pinmux_P9_31_spi_pin { + pinctrl-single,pins = <0x190 0x23>; }; /* Mode 3, Pull-Down, RxActive */ + P9_31_pruout_pin: pinmux_P9_31_pruout_pin { + pinctrl-single,pins = <0x190 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_31_pruin_pin: pinmux_P9_31_pruin_pin { + pinctrl-single,pins = <0x190 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + P9_31_audio_pin: pinmux_P9_31_audio_pin { + pinctrl-single,pins = <0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)>; }; /* mcasp0_aclkx.mcasp0_aclkx */ + + /* P9_32 VADC */ + /* P9_33 (ZCZ ball C8 ) AIN4 */ + /* P9_34 AGND */ + /* P9_35 (ZCZ ball A8 ) AIN6 */ + /* P9_36 (ZCZ ball B8 ) AIN5 */ + /* P9_37 (ZCZ ball B7 ) AIN2 */ + /* P9_38 (ZCZ ball A7 ) AIN3 */ + /* P9_39 (ZCZ ball B6 ) AIN0 */ + /* P9_40 (ZCZ ball C7 ) AIN1 */ + + /* P9_41 (ZCZ ball D14) */ + P9_41_default_pin: pinmux_P9_41_default_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_gpio_pin: pinmux_P9_41_gpio_pin { + pinctrl-single,pins = <0x1b4 0x2F>; }; /* Mode 7, RxActive */ + P9_41_gpio_pu_pin: pinmux_P9_41_gpio_pu_pin { + pinctrl-single,pins = <0x1b4 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_41_gpio_pd_pin: pinmux_P9_41_gpio_pd_pin { + pinctrl-single,pins = <0x1b4 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_41_timer_pin: pinmux_P9_41_timer_pin { + pinctrl-single,pins = <0x1b4 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + P9_41_pruin_pin: pinmux_P9_41_pruin_pin { + pinctrl-single,pins = <0x1b4 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + + /* P9_41.1 */ + /* P9_91 (ZCZ ball D13) */ + P9_91_default_pin: pinmux_P9_91_default_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_gpio_pin: pinmux_P9_91_gpio_pin { + pinctrl-single,pins = <0x1a8 0x2F>; }; /* Mode 7, RxActive */ + P9_91_gpio_pu_pin: pinmux_P9_91_gpio_pu_pin { + pinctrl-single,pins = <0x1a8 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_91_gpio_pd_pin: pinmux_P9_91_gpio_pd_pin { + pinctrl-single,pins = <0x1a8 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_91_qep_pin: pinmux_P9_91_qep_pin { + pinctrl-single,pins = <0x1a8 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_91_pruout_pin: pinmux_P9_91_pruout_pin { + pinctrl-single,pins = <0x1a8 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_91_pruin_pin: pinmux_P9_91_pruin_pin { + pinctrl-single,pins = <0x1a8 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_42 (ZCZ ball C18) */ + P9_42_default_pin: pinmux_P9_42_default_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_gpio_pin: pinmux_P9_42_gpio_pin { + pinctrl-single,pins = <0x164 0x2F>; }; /* Mode 7, RxActive */ + P9_42_gpio_pu_pin: pinmux_P9_42_gpio_pu_pin { + pinctrl-single,pins = <0x164 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_42_gpio_pd_pin: pinmux_P9_42_gpio_pd_pin { + pinctrl-single,pins = <0x164 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_42_pwm_pin: pinmux_P9_42_pwm_pin { + pinctrl-single,pins = <0x164 0x20>; }; /* Mode 0, Pull-Down, RxActive */ + P9_42_uart_pin: pinmux_P9_42_uart_pin { + pinctrl-single,pins = <0x164 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_42_spics_pin: pinmux_P9_42_spics_pin { + pinctrl-single,pins = <0x164 0x22>; }; /* Mode 2, Pull-Down, RxActive */ + P9_42_spiclk_pin: pinmux_P9_42_spiclk_pin { + pinctrl-single,pins = <0x164 0x24>; }; /* Mode 4, Pull-Down, RxActive */ + + /* P9_42.1 */ + /* P9_92 (ZCZ ball B12) */ + P9_92_default_pin: pinmux_P9_92_default_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_gpio_pin: pinmux_P9_92_gpio_pin { + pinctrl-single,pins = <0x1a0 0x2F>; }; /* Mode 7, RxActive */ + P9_92_gpio_pu_pin: pinmux_P9_92_gpio_pu_pin { + pinctrl-single,pins = <0x1a0 0x37>; }; /* Mode 7, Pull-Up, RxActive */ + P9_92_gpio_pd_pin: pinmux_P9_92_gpio_pd_pin { + pinctrl-single,pins = <0x1a0 0x27>; }; /* Mode 7, Pull-Down, RxActive */ + P9_92_qep_pin: pinmux_P9_92_qep_pin { + pinctrl-single,pins = <0x1a0 0x21>; }; /* Mode 1, Pull-Down, RxActive */ + P9_92_pruout_pin: pinmux_P9_92_pruout_pin { + pinctrl-single,pins = <0x1a0 0x25>; }; /* Mode 5, Pull-Down, RxActive */ + P9_92_pruin_pin: pinmux_P9_92_pruin_pin { + pinctrl-single,pins = <0x1a0 0x26>; }; /* Mode 6, Pull-Down, RxActive */ + + /* P9_43 GND */ + /* P9_44 GND */ + /* P9_45 GND */ + /* P9_46 GND */ +}; + +/**********************************************************************/ +/* Pin Multiplex Helpers */ +/* */ +/* These provide userspace runtime pin configuration for the */ +/* BeagleBone cape expansion headers */ +/**********************************************************************/ + +&ocp { + /************************/ + /* P8 Header */ + /************************/ + + P8_07_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_07_default_pin>; + pinctrl-1 = <&P8_07_gpio_pin>; + pinctrl-2 = <&P8_07_gpio_pu_pin>; + pinctrl-3 = <&P8_07_gpio_pd_pin>; + pinctrl-4 = <&P8_07_timer_pin>; + }; + + P8_08_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_08_default_pin>; + pinctrl-1 = <&P8_08_gpio_pin>; + pinctrl-2 = <&P8_08_gpio_pu_pin>; + pinctrl-3 = <&P8_08_gpio_pd_pin>; + pinctrl-4 = <&P8_08_timer_pin>; + }; + + P8_09_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_09_default_pin>; + pinctrl-1 = <&P8_09_gpio_pin>; + pinctrl-2 = <&P8_09_gpio_pu_pin>; + pinctrl-3 = <&P8_09_gpio_pd_pin>; + pinctrl-4 = <&P8_09_timer_pin>; + }; + + P8_10_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer"; + pinctrl-0 = <&P8_10_default_pin>; + pinctrl-1 = <&P8_10_gpio_pin>; + pinctrl-2 = <&P8_10_gpio_pu_pin>; + pinctrl-3 = <&P8_10_gpio_pd_pin>; + pinctrl-4 = <&P8_10_timer_pin>; + }; + + P8_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_11_default_pin>; + pinctrl-1 = <&P8_11_gpio_pin>; + pinctrl-2 = <&P8_11_gpio_pu_pin>; + pinctrl-3 = <&P8_11_gpio_pd_pin>; + pinctrl-4 = <&P8_11_pruout_pin>; + pinctrl-5 = <&P8_11_qep_pin>; + }; + + P8_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "qep"; + pinctrl-0 = <&P8_12_default_pin>; + pinctrl-1 = <&P8_12_gpio_pin>; + pinctrl-2 = <&P8_12_gpio_pu_pin>; + pinctrl-3 = <&P8_12_gpio_pd_pin>; + pinctrl-4 = <&P8_12_pruout_pin>; + pinctrl-5 = <&P8_12_qep_pin>; + }; + + P8_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_13_default_pin>; + pinctrl-1 = <&P8_13_gpio_pin>; + pinctrl-2 = <&P8_13_gpio_pu_pin>; + pinctrl-3 = <&P8_13_gpio_pd_pin>; + pinctrl-4 = <&P8_13_pwm_pin>; + }; + + P8_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_14_default_pin>; + pinctrl-1 = <&P8_14_gpio_pin>; + pinctrl-2 = <&P8_14_gpio_pu_pin>; + pinctrl-3 = <&P8_14_gpio_pd_pin>; + pinctrl-4 = <&P8_14_pwm_pin>; + }; + + P8_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_15_default_pin>; + pinctrl-1 = <&P8_15_gpio_pin>; + pinctrl-2 = <&P8_15_gpio_pu_pin>; + pinctrl-3 = <&P8_15_gpio_pd_pin>; + pinctrl-4 = <&P8_15_pruin_pin>; + pinctrl-5 = <&P8_15_qep_pin>; + }; + + P8_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruin", "qep"; + pinctrl-0 = <&P8_16_default_pin>; + pinctrl-1 = <&P8_16_gpio_pin>; + pinctrl-2 = <&P8_16_gpio_pu_pin>; + pinctrl-3 = <&P8_16_gpio_pd_pin>; + pinctrl-4 = <&P8_16_pruin_pin>; + pinctrl-5 = <&P8_16_qep_pin>; + }; + + P8_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_17_default_pin>; + pinctrl-1 = <&P8_17_gpio_pin>; + pinctrl-2 = <&P8_17_gpio_pu_pin>; + pinctrl-3 = <&P8_17_gpio_pd_pin>; + pinctrl-4 = <&P8_17_pwm_pin>; + }; + + P8_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_18_default_pin>; + pinctrl-1 = <&P8_18_gpio_pin>; + pinctrl-2 = <&P8_18_gpio_pu_pin>; + pinctrl-3 = <&P8_18_gpio_pd_pin>; + }; + + P8_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P8_19_default_pin>; + pinctrl-1 = <&P8_19_gpio_pin>; + pinctrl-2 = <&P8_19_gpio_pu_pin>; + pinctrl-3 = <&P8_19_gpio_pd_pin>; + pinctrl-4 = <&P8_19_pwm_pin>; + }; + + P8_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P8_26_default_pin>; + pinctrl-1 = <&P8_26_gpio_pin>; + pinctrl-2 = <&P8_26_gpio_pu_pin>; + pinctrl-3 = <&P8_26_gpio_pd_pin>; + }; + + P8_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_27_default_pin>; + pinctrl-1 = <&P8_27_gpio_pin>; + pinctrl-2 = <&P8_27_gpio_pu_pin>; + pinctrl-3 = <&P8_27_gpio_pd_pin>; + pinctrl-4 = <&P8_27_pruout_pin>; + pinctrl-5 = <&P8_27_pruin_pin>; + pinctrl-6 = <&P8_27_hdmi_pin>; + }; + + P8_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_28_default_pin>; + pinctrl-1 = <&P8_28_gpio_pin>; + pinctrl-2 = <&P8_28_gpio_pu_pin>; + pinctrl-3 = <&P8_28_gpio_pd_pin>; + pinctrl-4 = <&P8_28_pruout_pin>; + pinctrl-5 = <&P8_28_pruin_pin>; + pinctrl-6 = <&P8_28_hdmi_pin>; + }; + + P8_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_29_default_pin>; + pinctrl-1 = <&P8_29_gpio_pin>; + pinctrl-2 = <&P8_29_gpio_pu_pin>; + pinctrl-3 = <&P8_29_gpio_pd_pin>; + pinctrl-4 = <&P8_29_pruout_pin>; + pinctrl-5 = <&P8_29_pruin_pin>; + pinctrl-6 = <&P8_29_hdmi_pin>; + }; + + P8_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_30_default_pin>; + pinctrl-1 = <&P8_30_gpio_pin>; + pinctrl-2 = <&P8_30_gpio_pu_pin>; + pinctrl-3 = <&P8_30_gpio_pd_pin>; + pinctrl-4 = <&P8_30_pruout_pin>; + pinctrl-5 = <&P8_30_pruin_pin>; + pinctrl-6 = <&P8_30_hdmi_pin>; + }; + + P8_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart", "hdmi"; + pinctrl-0 = <&P8_31_default_pin>; + pinctrl-1 = <&P8_31_gpio_pin>; + pinctrl-2 = <&P8_31_gpio_pu_pin>; + pinctrl-3 = <&P8_31_gpio_pd_pin>; + pinctrl-4 = <&P8_31_uart_pin>; + pinctrl-5 = <&P8_31_hdmi_pin>; + }; + + P8_32_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_32_default_pin>; + pinctrl-1 = <&P8_32_gpio_pin>; + pinctrl-2 = <&P8_32_gpio_pu_pin>; + pinctrl-3 = <&P8_32_gpio_pd_pin>; + pinctrl-4 = <&P8_32_hdmi_pin>; + }; + + P8_33_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_33_default_pin>; + pinctrl-1 = <&P8_33_gpio_pin>; + pinctrl-2 = <&P8_33_gpio_pu_pin>; + pinctrl-3 = <&P8_33_gpio_pd_pin>; + pinctrl-4 = <&P8_33_hdmi_pin>; + }; + + P8_34_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_34_default_pin>; + pinctrl-1 = <&P8_34_gpio_pin>; + pinctrl-2 = <&P8_34_gpio_pu_pin>; + pinctrl-3 = <&P8_34_gpio_pd_pin>; + pinctrl-4 = <&P8_34_pwm_pin>; + pinctrl-5 = <&P8_34_hdmi_pin>; + }; + + P8_35_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "hdmi"; + pinctrl-0 = <&P8_35_default_pin>; + pinctrl-1 = <&P8_35_gpio_pin>; + pinctrl-2 = <&P8_35_gpio_pu_pin>; + pinctrl-3 = <&P8_35_gpio_pd_pin>; + pinctrl-4 = <&P8_35_hdmi_pin>; + }; + + P8_36_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","pwm", "hdmi"; + pinctrl-0 = <&P8_36_default_pin>; + pinctrl-1 = <&P8_36_gpio_pin>; + pinctrl-2 = <&P8_36_gpio_pu_pin>; + pinctrl-3 = <&P8_36_gpio_pd_pin>; + pinctrl-4 = <&P8_36_pwm_pin>; + pinctrl-5 = <&P8_36_hdmi_pin>; + }; + + P8_37_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_37_default_pin>; + pinctrl-1 = <&P8_37_gpio_pin>; + pinctrl-2 = <&P8_37_gpio_pu_pin>; + pinctrl-3 = <&P8_37_gpio_pd_pin>; + pinctrl-4 = <&P8_37_uart_pin>; + pinctrl-5 = <&P8_37_pwm_pin>; + pinctrl-6 = <&P8_37_hdmi_pin>; + }; + + P8_38_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd","uart","pwm", "hdmi"; + pinctrl-0 = <&P8_38_default_pin>; + pinctrl-1 = <&P8_38_gpio_pin>; + pinctrl-2 = <&P8_38_gpio_pu_pin>; + pinctrl-3 = <&P8_38_gpio_pd_pin>; + pinctrl-4 = <&P8_38_uart_pin>; + pinctrl-5 = <&P8_38_pwm_pin>; + pinctrl-6 = <&P8_38_hdmi_pin>; + }; + + P8_39_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_39_default_pin>; + pinctrl-1 = <&P8_39_gpio_pin>; + pinctrl-2 = <&P8_39_gpio_pu_pin>; + pinctrl-3 = <&P8_39_gpio_pd_pin>; + pinctrl-4 = <&P8_39_pruout_pin>; + pinctrl-5 = <&P8_39_pruin_pin>; + pinctrl-6 = <&P8_39_hdmi_pin>; + }; + + P8_40_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_40_default_pin>; + pinctrl-1 = <&P8_40_gpio_pin>; + pinctrl-2 = <&P8_40_gpio_pu_pin>; + pinctrl-3 = <&P8_40_gpio_pd_pin>; + pinctrl-4 = <&P8_40_pruout_pin>; + pinctrl-5 = <&P8_40_pruin_pin>; + pinctrl-6 = <&P8_40_hdmi_pin>; + }; + + P8_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_41_default_pin>; + pinctrl-1 = <&P8_41_gpio_pin>; + pinctrl-2 = <&P8_41_gpio_pu_pin>; + pinctrl-3 = <&P8_41_gpio_pd_pin>; + pinctrl-4 = <&P8_41_pruout_pin>; + pinctrl-5 = <&P8_41_pruin_pin>; + pinctrl-6 = <&P8_41_hdmi_pin>; + }; + + P8_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin", "hdmi"; + pinctrl-0 = <&P8_42_default_pin>; + pinctrl-1 = <&P8_42_gpio_pin>; + pinctrl-2 = <&P8_42_gpio_pu_pin>; + pinctrl-3 = <&P8_42_gpio_pd_pin>; + pinctrl-4 = <&P8_42_pruout_pin>; + pinctrl-5 = <&P8_42_pruin_pin>; + pinctrl-6 = <&P8_42_hdmi_pin>; + }; + + P8_43_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_43_default_pin>; + pinctrl-1 = <&P8_43_gpio_pin>; + pinctrl-2 = <&P8_43_gpio_pu_pin>; + pinctrl-3 = <&P8_43_gpio_pd_pin>; + pinctrl-4 = <&P8_43_pruout_pin>; + pinctrl-5 = <&P8_43_pruin_pin>; + pinctrl-6 = <&P8_43_pwm_pin>; + pinctrl-7 = <&P8_43_hdmi_pin>; + }; + + P8_44_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_44_default_pin>; + pinctrl-1 = <&P8_44_gpio_pin>; + pinctrl-2 = <&P8_44_gpio_pu_pin>; + pinctrl-3 = <&P8_44_gpio_pd_pin>; + pinctrl-4 = <&P8_44_pruout_pin>; + pinctrl-5 = <&P8_44_pruin_pin>; + pinctrl-6 = <&P8_44_pwm_pin>; + pinctrl-7 = <&P8_44_hdmi_pin>; + }; + + P8_45_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_45_default_pin>; + pinctrl-1 = <&P8_45_gpio_pin>; + pinctrl-2 = <&P8_45_gpio_pu_pin>; + pinctrl-3 = <&P8_45_gpio_pd_pin>; + pinctrl-4 = <&P8_45_pruout_pin>; + pinctrl-5 = <&P8_45_pruin_pin>; + pinctrl-6 = <&P8_45_pwm_pin>; + pinctrl-7 = <&P8_45_hdmi_pin>; + }; + + P8_46_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pruout", "pruin","pwm", "hdmi"; + pinctrl-0 = <&P8_46_default_pin>; + pinctrl-1 = <&P8_46_gpio_pin>; + pinctrl-2 = <&P8_46_gpio_pu_pin>; + pinctrl-3 = <&P8_46_gpio_pd_pin>; + pinctrl-4 = <&P8_46_pruout_pin>; + pinctrl-5 = <&P8_46_pruin_pin>; + pinctrl-6 = <&P8_46_pwm_pin>; + pinctrl-7 = <&P8_46_hdmi_pin>; + }; + + /************************/ + /* P9 Header */ + /************************/ + + P9_11_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_11_default_pin>; + pinctrl-1 = <&P9_11_gpio_pin>; + pinctrl-2 = <&P9_11_gpio_pu_pin>; + pinctrl-3 = <&P9_11_gpio_pd_pin>; + pinctrl-4 = <&P9_11_uart_pin>; + }; + + P9_12_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&P9_12_default_pin>; + pinctrl-1 = <&P9_12_gpio_pin>; + pinctrl-2 = <&P9_12_gpio_pu_pin>; + pinctrl-3 = <&P9_12_gpio_pd_pin>; + }; + + P9_13_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart"; + pinctrl-0 = <&P9_13_default_pin>; + pinctrl-1 = <&P9_13_gpio_pin>; + pinctrl-2 = <&P9_13_gpio_pu_pin>; + pinctrl-3 = <&P9_13_gpio_pd_pin>; + pinctrl-4 = <&P9_13_uart_pin>; + }; + + P9_14_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_14_default_pin>; + pinctrl-1 = <&P9_14_gpio_pin>; + pinctrl-2 = <&P9_14_gpio_pu_pin>; + pinctrl-3 = <&P9_14_gpio_pd_pin>; + pinctrl-4 = <&P9_14_pwm_pin>; + }; + + P9_15_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_15_default_pin>; + pinctrl-1 = <&P9_15_gpio_pin>; + pinctrl-2 = <&P9_15_gpio_pu_pin>; + pinctrl-3 = <&P9_15_gpio_pd_pin>; + pinctrl-4 = <&P9_15_pwm_pin>; + }; + + P9_16_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_16_default_pin>; + pinctrl-1 = <&P9_16_gpio_pin>; + pinctrl-2 = <&P9_16_gpio_pu_pin>; + pinctrl-3 = <&P9_16_gpio_pd_pin>; + pinctrl-4 = <&P9_16_pwm_pin>; + }; + + P9_17_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_17_default_pin>; + pinctrl-1 = <&P9_17_gpio_pin>; + pinctrl-2 = <&P9_17_gpio_pu_pin>; + pinctrl-3 = <&P9_17_gpio_pd_pin>; + pinctrl-4 = <&P9_17_spi_pin>; + pinctrl-5 = <&P9_17_i2c_pin>; + pinctrl-6 = <&P9_17_pwm_pin>; + }; + + P9_18_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "i2c", "pwm"; + pinctrl-0 = <&P9_18_default_pin>; + pinctrl-1 = <&P9_18_gpio_pin>; + pinctrl-2 = <&P9_18_gpio_pu_pin>; + pinctrl-3 = <&P9_18_gpio_pd_pin>; + pinctrl-4 = <&P9_18_spi_pin>; + pinctrl-5 = <&P9_18_i2c_pin>; + pinctrl-6 = <&P9_18_pwm_pin>; + }; + + P9_19_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_19_default_pin>; + pinctrl-1 = <&P9_19_gpio_pin>; + pinctrl-2 = <&P9_19_gpio_pu_pin>; + pinctrl-3 = <&P9_19_gpio_pd_pin>; + pinctrl-4 = <&P9_19_can_pin>; + pinctrl-5 = <&P9_19_i2c_pin>; + }; + + P9_20_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "can", "i2c"; + pinctrl-0 = <&P9_20_default_pin>; + pinctrl-1 = <&P9_20_gpio_pin>; + pinctrl-2 = <&P9_20_gpio_pu_pin>; + pinctrl-3 = <&P9_20_gpio_pd_pin>; + pinctrl-4 = <&P9_20_can_pin>; + pinctrl-5 = <&P9_20_i2c_pin>; + }; + + P9_21_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_21_default_pin>; + pinctrl-1 = <&P9_21_gpio_pin>; + pinctrl-2 = <&P9_21_gpio_pu_pin>; + pinctrl-3 = <&P9_21_gpio_pd_pin>; + pinctrl-4 = <&P9_21_spi_pin>; + pinctrl-5 = <&P9_21_uart_pin>; + pinctrl-6 = <&P9_21_i2c_pin>; + pinctrl-7 = <&P9_21_pwm_pin>; + }; + + P9_22_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "spi", "uart", "i2c", "pwm"; + pinctrl-0 = <&P9_22_default_pin>; + pinctrl-1 = <&P9_22_gpio_pin>; + pinctrl-2 = <&P9_22_gpio_pu_pin>; + pinctrl-3 = <&P9_22_gpio_pd_pin>; + pinctrl-4 = <&P9_22_spi_pin>; + pinctrl-5 = <&P9_22_uart_pin>; + pinctrl-6 = <&P9_22_i2c_pin>; + pinctrl-7 = <&P9_22_pwm_pin>; + }; + + P9_23_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm"; + pinctrl-0 = <&P9_23_default_pin>; + pinctrl-1 = <&P9_23_gpio_pin>; + pinctrl-2 = <&P9_23_gpio_pu_pin>; + pinctrl-3 = <&P9_23_gpio_pd_pin>; + pinctrl-4 = <&P9_23_pwm_pin>; + }; + + P9_24_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_24_default_pin>; + pinctrl-1 = <&P9_24_gpio_pin>; + pinctrl-2 = <&P9_24_gpio_pu_pin>; + pinctrl-3 = <&P9_24_gpio_pd_pin>; + pinctrl-4 = <&P9_24_uart_pin>; + pinctrl-5 = <&P9_24_can_pin>; + pinctrl-6 = <&P9_24_i2c_pin>; + pinctrl-7 = <&P9_24_pruin_pin>; + }; + + P9_25_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_25_default_pin>; + pinctrl-1 = <&P9_25_gpio_pin>; + pinctrl-2 = <&P9_25_gpio_pu_pin>; + pinctrl-3 = <&P9_25_gpio_pd_pin>; + pinctrl-4 = <&P9_25_qep_pin>; + pinctrl-5 = <&P9_25_pruout_pin>; + pinctrl-6 = <&P9_25_pruin_pin>; + pinctrl-7 = <&P9_25_audio_pin>; + }; + + P9_26_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "uart", "can", "i2c", "pruin"; + pinctrl-0 = <&P9_26_default_pin>; + pinctrl-1 = <&P9_26_gpio_pin>; + pinctrl-2 = <&P9_26_gpio_pu_pin>; + pinctrl-3 = <&P9_26_gpio_pd_pin>; + pinctrl-4 = <&P9_26_uart_pin>; + pinctrl-5 = <&P9_26_can_pin>; + pinctrl-6 = <&P9_26_i2c_pin>; + pinctrl-7 = <&P9_26_pruin_pin>; + }; + + P9_27_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_27_default_pin>; + pinctrl-1 = <&P9_27_gpio_pin>; + pinctrl-2 = <&P9_27_gpio_pu_pin>; + pinctrl-3 = <&P9_27_gpio_pd_pin>; + pinctrl-4 = <&P9_27_qep_pin>; + pinctrl-5 = <&P9_27_pruout_pin>; + pinctrl-6 = <&P9_27_pruin_pin>; + }; + + P9_28_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pwm2", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_28_default_pin>; + pinctrl-1 = <&P9_28_gpio_pin>; + pinctrl-2 = <&P9_28_gpio_pu_pin>; + pinctrl-3 = <&P9_28_gpio_pd_pin>; + pinctrl-4 = <&P9_28_pwm_pin>; + pinctrl-5 = <&P9_28_spi_pin>; + pinctrl-6 = <&P9_28_pwm2_pin>; + pinctrl-7 = <&P9_28_pruout_pin>; + pinctrl-8 = <&P9_28_pruin_pin>; + pinctrl-9 = <&P9_28_audio_pin>; + }; + + P9_29_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_29_default_pin>; + pinctrl-1 = <&P9_29_gpio_pin>; + pinctrl-2 = <&P9_29_gpio_pu_pin>; + pinctrl-3 = <&P9_29_gpio_pd_pin>; + pinctrl-4 = <&P9_29_pwm_pin>; + pinctrl-5 = <&P9_29_spi_pin>; + pinctrl-6 = <&P9_29_pruout_pin>; + pinctrl-7 = <&P9_29_pruin_pin>; + pinctrl-8 = <&P9_29_audio_pin>; + }; + + P9_30_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin"; + pinctrl-0 = <&P9_30_default_pin>; + pinctrl-1 = <&P9_30_gpio_pin>; + pinctrl-2 = <&P9_30_gpio_pu_pin>; + pinctrl-3 = <&P9_30_gpio_pd_pin>; + pinctrl-4 = <&P9_30_pwm_pin>; + pinctrl-5 = <&P9_30_spi_pin>; + pinctrl-6 = <&P9_30_pruout_pin>; + pinctrl-7 = <&P9_30_pruin_pin>; + }; + + P9_31_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "spi", "pruout", "pruin", "audio"; + pinctrl-0 = <&P9_31_default_pin>; + pinctrl-1 = <&P9_31_gpio_pin>; + pinctrl-2 = <&P9_31_gpio_pu_pin>; + pinctrl-3 = <&P9_31_gpio_pd_pin>; + pinctrl-4 = <&P9_31_pwm_pin>; + pinctrl-5 = <&P9_31_spi_pin>; + pinctrl-6 = <&P9_31_pruout_pin>; + pinctrl-7 = <&P9_31_pruin_pin>; + pinctrl-8 = <&P9_31_audio_pin>; + }; + + P9_41_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "timer", "pruin"; + pinctrl-0 = <&P9_41_default_pin>; + pinctrl-1 = <&P9_41_gpio_pin>; + pinctrl-2 = <&P9_41_gpio_pu_pin>; + pinctrl-3 = <&P9_41_gpio_pd_pin>; + pinctrl-4 = <&P9_41_timer_pin>; + pinctrl-5 = <&P9_41_pruin_pin>; + }; + + P9_91_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_91_default_pin>; + pinctrl-1 = <&P9_91_gpio_pin>; + pinctrl-2 = <&P9_91_gpio_pu_pin>; + pinctrl-3 = <&P9_91_gpio_pd_pin>; + pinctrl-4 = <&P9_91_qep_pin>; + pinctrl-5 = <&P9_91_pruout_pin>; + pinctrl-6 = <&P9_91_pruin_pin>; + }; + + P9_42_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "pwm", "uart", "spics", "spiclk"; + pinctrl-0 = <&P9_42_default_pin>; + pinctrl-1 = <&P9_42_gpio_pin>; + pinctrl-2 = <&P9_42_gpio_pu_pin>; + pinctrl-3 = <&P9_42_gpio_pd_pin>; + pinctrl-4 = <&P9_42_pwm_pin>; + pinctrl-5 = <&P9_42_uart_pin>; + pinctrl-6 = <&P9_42_spics_pin>; + pinctrl-7 = <&P9_42_spiclk_pin>; + }; + + P9_92_pinmux { + compatible = "bone-pinmux-helper"; + status = "okay"; + pinctrl-names = "default", "gpio", "gpio_pu", "gpio_pd", "qep", "pruout", "pruin"; + pinctrl-0 = <&P9_92_default_pin>; + pinctrl-1 = <&P9_92_gpio_pin>; + pinctrl-2 = <&P9_92_gpio_pu_pin>; + pinctrl-3 = <&P9_92_gpio_pd_pin>; + pinctrl-4 = <&P9_92_qep_pin>; + pinctrl-5 = <&P9_92_pruout_pin>; + pinctrl-6 = <&P9_92_pruin_pin>; + }; + + cape-universal { + compatible = "gpio-of-helper"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + P8_07 { + gpio-name = "P8_07"; + gpio = <&gpio2 2 0>; + input; + dir-changeable; + }; + P8_08 { + gpio-name = "P8_08"; + gpio = <&gpio2 3 0>; + input; + dir-changeable; + }; + P8_09 { + gpio-name = "P8_09"; + gpio = <&gpio2 5 0>; + input; + dir-changeable; + }; + P8_10 { + gpio-name = "P8_10"; + gpio = <&gpio2 4 0>; + input; + dir-changeable; + }; + P8_11 { + gpio-name = "P8_11"; + gpio = <&gpio1 13 0>; + input; + dir-changeable; + }; + P8_12 { + gpio-name = "P8_12"; + gpio = <&gpio1 12 0>; + input; + dir-changeable; + }; + P8_13 { + gpio-name = "P8_13"; + gpio = <&gpio0 23 0>; + input; + dir-changeable; + }; + P8_14 { + gpio-name = "P8_14"; + gpio = <&gpio0 26 0>; + input; + dir-changeable; + }; + P8_15 { + gpio-name = "P8_15"; + gpio = <&gpio1 15 0>; + input; + dir-changeable; + }; + P8_16 { + gpio-name = "P8_16"; + gpio = <&gpio1 14 0>; + input; + dir-changeable; + }; + P8_17 { + gpio-name = "P8_17"; + gpio = <&gpio0 27 0>; + input; + dir-changeable; + }; + P8_18 { + gpio-name = "P8_18"; + gpio = <&gpio2 1 0>; + input; + dir-changeable; + }; + P8_19 { + gpio-name = "P8_19"; + gpio = <&gpio0 22 0>; + input; + dir-changeable; + }; + + P8_26 { + gpio-name = "P8_26"; + gpio = <&gpio1 29 0>; + input; + dir-changeable; + }; + P8_27 { + gpio-name = "P8_27"; + gpio = <&gpio2 22 0>; + input; + dir-changeable; + }; + P8_28 { + gpio-name = "P8_28"; + gpio = <&gpio2 24 0>; + input; + dir-changeable; + }; + P8_29 { + gpio-name = "P8_29"; + gpio = <&gpio2 23 0>; + input; + dir-changeable; + }; + P8_30 { + gpio-name = "P8_30"; + gpio = <&gpio2 25 0>; + input; + dir-changeable; + }; + P8_31 { + gpio-name = "P8_31"; + gpio = <&gpio0 10 0>; + input; + dir-changeable; + }; + P8_32 { + gpio-name = "P8_32"; + gpio = <&gpio0 11 0>; + input; + dir-changeable; + }; + P8_33 { + gpio-name = "P8_33"; + gpio = <&gpio0 9 0>; + input; + dir-changeable; + }; + P8_34 { + gpio-name = "P8_34"; + gpio = <&gpio2 17 0>; + input; + dir-changeable; + }; + P8_35 { + gpio-name = "P8_35"; + gpio = <&gpio0 8 0>; + input; + dir-changeable; + }; + P8_36 { + gpio-name = "P8_36"; + gpio = <&gpio2 16 0>; + input; + dir-changeable; + }; + P8_37 { + gpio-name = "P8_37"; + gpio = <&gpio2 14 0>; + input; + dir-changeable; + }; + P8_38 { + gpio-name = "P8_38"; + gpio = <&gpio2 15 0>; + input; + dir-changeable; + }; + P8_39 { + gpio-name = "P8_39"; + gpio = <&gpio2 12 0>; + input; + dir-changeable; + }; + P8_40 { + gpio-name = "P8_40"; + gpio = <&gpio2 13 0>; + input; + dir-changeable; + }; + P8_41 { + gpio-name = "P8_41"; + gpio = <&gpio2 10 0>; + input; + dir-changeable; + }; + P8_42 { + gpio-name = "P8_42"; + gpio = <&gpio2 11 0>; + input; + dir-changeable; + }; + P8_43 { + gpio-name = "P8_43"; + gpio = <&gpio2 8 0>; + input; + dir-changeable; + }; + P8_44 { + gpio-name = "P8_44"; + gpio = <&gpio2 9 0>; + input; + dir-changeable; + }; + P8_45 { + gpio-name = "P8_45"; + gpio = <&gpio2 6 0>; + input; + dir-changeable; + }; + P8_46 { + gpio-name = "P8_46"; + gpio = <&gpio2 7 0>; + input; + dir-changeable; + }; + + + P9_11 { + gpio-name = "P9_11"; + gpio = <&gpio0 30 0>; + input; + dir-changeable; + }; + P9_12 { + gpio-name = "P9_12"; + gpio = <&gpio1 28 0>; + input; + dir-changeable; + }; + P9_13 { + gpio-name = "P9_13"; + gpio = <&gpio0 31 0>; + input; + dir-changeable; + }; + P9_14 { + gpio-name = "P9_14"; + gpio = <&gpio1 18 0>; + input; + dir-changeable; + }; + P9_15 { + gpio-name = "P9_15"; + gpio = <&gpio1 16 0>; + input; + dir-changeable; + }; + P9_16 { + gpio-name = "P9_16"; + gpio = <&gpio1 19 0>; + input; + dir-changeable; + }; + P9_17 { + gpio-name = "P9_17"; + gpio = <&gpio0 5 0>; + input; + dir-changeable; + }; + P9_18 { + gpio-name = "P9_18"; + gpio = <&gpio0 4 0>; + input; + dir-changeable; + }; + P9_19 { + gpio-name = "P9_19"; + gpio = <&gpio0 13 0>; + input; + dir-changeable; + }; + P9_20 { + gpio-name = "P9_20"; + gpio = <&gpio0 12 0>; + input; + dir-changeable; + }; + P9_21 { + gpio-name = "P9_21"; + gpio = <&gpio0 3 0>; + input; + dir-changeable; + }; + P9_22 { + gpio-name = "P9_22"; + gpio = <&gpio0 2 0>; + input; + dir-changeable; + }; + P9_23 { + gpio-name = "P9_23"; + gpio = <&gpio1 17 0>; + input; + dir-changeable; + }; + P9_24 { + gpio-name = "P9_24"; + gpio = <&gpio0 15 0>; + input; + dir-changeable; + }; + P9_25 { + gpio-name = "P9_25"; + gpio = <&gpio3 21 0>; + input; + dir-changeable; + }; + P9_26 { + gpio-name = "P9_26"; + gpio = <&gpio0 14 0>; + input; + dir-changeable; + }; + P9_27 { + gpio-name = "P9_27"; + gpio = <&gpio3 19 0>; + input; + dir-changeable; + }; + P9_28 { + gpio-name = "P9_28"; + gpio = <&gpio3 17 0>; + input; + dir-changeable; + }; + P9_29 { + gpio-name = "P9_29"; + gpio = <&gpio3 15 0>; + input; + dir-changeable; + }; + P9_30 { + gpio-name = "P9_30"; + gpio = <&gpio3 16 0>; + input; + dir-changeable; + }; + P9_31 { + gpio-name = "P9_31"; + gpio = <&gpio3 14 0>; + input; + dir-changeable; + }; + P9_41 { + gpio-name = "P9_41"; + gpio = <&gpio0 20 0>; + input; + dir-changeable; + }; + P9_91 { + gpio-name = "P9_91"; + gpio = <&gpio3 20 0>; + input; + dir-changeable; + }; + P9_42 { + gpio-name = "P9_42"; + gpio = <&gpio0 7 0>; + input; + dir-changeable; + }; + P9_92 { + gpio-name = "P9_92"; + gpio = <&gpio3 18 0>; + input; + dir-changeable; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index e5c32c583fcbc..005738c8a04ba 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -25,14 +25,14 @@ compatible = "gpio-leds"; led@2 { - label = "beaglebone:green:heartbeat"; + label = "beaglebone:green:usr0"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { - label = "beaglebone:green:mmc0"; + label = "beaglebone:green:usr1"; gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; default-state = "off"; @@ -81,6 +81,13 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ @@ -97,6 +104,8 @@ cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ @@ -116,6 +125,8 @@ cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) @@ -218,8 +229,67 @@ reg = <0x24>; }; + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + cape_eeprom0: cape_eeprom0@54 { + compatible = "at,24c256"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + cape0_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom1: cape_eeprom1@55 { + compatible = "at,24c256"; + reg = <0x55>; + #address-cells = <1>; + #size-cells = <1>; + cape1_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom2: cape_eeprom2@56 { + compatible = "at,24c256"; + reg = <0x56>; + #address-cells = <1>; + #size-cells = <1>; + cape2_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom3: cape_eeprom3@57 { + compatible = "at,24c256"; + reg = <0x57>; + #address-cells = <1>; + #size-cells = <1>; + cape3_data: cape_data@0 { + reg = <0 0x100>; + }; + }; +}; + + /include/ "tps65217.dtsi" &tps { @@ -332,3 +402,28 @@ &wkup_m3_ipc { ti,scale-data-fw = "am335x-bone-scale-data.bin"; }; + +/* the cape manager */ +/ { + bone_capemgr { + compatible = "ti,bone-capemgr"; + status = "okay"; + + nvmem-cells = <&baseboard_data &cape0_data &cape1_data &cape2_data &cape3_data>; + nvmem-cell-names = "baseboard", "slot0", "slot1", "slot2", "slot3"; + #slots = <4>; + + /* map board revisions to compatible definitions */ + baseboardmaps { + baseboard_beaglebone: board@0 { + board-name = "A335BONE"; + compatible-name = "ti,beaglebone"; + }; + + baseboard_beaglebone_black: board@1 { + board-name = "A335BNLT"; + compatible-name = "ti,beaglebone-black"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts new file mode 100644 index 0000000000000..5de54738aa52e --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-emmc-overlay.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts new file mode 100644 index 0000000000000..4746f0dd5f039 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-hdmi-overlay.dts @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; + + mcasp0_pins_sleep: mcasp0_pins_sleep { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +&mcasp0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp0_pins>; + pinctrl-1 = <&mcasp0_pins_sleep>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&rtc { + system-power-controller; +}; + +/ { + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; + + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + hdmi_audio: hdmi_audio@0 { + compatible = "linux,hdmi-audio"; + status = "okay"; + }; + + sound { + compatible = "ti,beaglebone-black-audio"; + ti,model = "TI BeagleBone Black"; + ti,audio-codec = <&hdmi_audio>; + ti,mcasp-controller = <&mcasp0>; + ti,audio-routing = + "HDMI Out", "TX"; + clocks = <&clk_mcasp0>; + clock-names = "mclk"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts new file mode 100644 index 0000000000000..ee9c46895f629 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-nhdmi-overlay.dts @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +&rtc { + system-power-controller; +}; + +/ { + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-overlay.dts b/arch/arm/boot/dts/am335x-boneblack-overlay.dts new file mode 100644 index 0000000000000..3ee63a1a1a677 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-overlay.dts @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-replicape.dts b/arch/arm/boot/dts/am335x-boneblack-replicape.dts new file mode 100644 index 0000000000000..b9532c4fa6b3d --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-replicape.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin>; + + nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ + 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ + >; + }; + nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { + pinctrl-single,pins = < + 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ + >; + }; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* xdma_event_intr1.clkout2 */ + >; + }; + +}; + +&lcdc { + status = "okay"; +}; + +/ { + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + status = "okay"; + }; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi new file mode 100644 index 0000000000000..94caa22903017 --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod-cape.dtsi @@ -0,0 +1,128 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +/ { + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WL_EN */ + gpio = <&gpio0 26 0>; + enable-active-high; + }; + + kim { + compatible = "kim"; + nshutdown_gpio = <44>; /* Bank1, pin12 */ + dev_name = "/dev/ttyO4"; + flow_cntrl = <1>; + baud_rate = <3000000>; + }; + + btwilink { + compatible = "btwilink"; + }; +}; + +&am33xx_pinmux { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + 0x30 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + mmc2_pins_sleep: pinmux_mmc2_pins_sleep { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + /* wl18xx card enable/irq GPIOs. */ + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x28 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_ad10.gpio0_26 WL_EN*/ + 0x2C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad11.gpio0_27 WL_IRQ*/ + 0x7C (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpio1_29 BF_EN*/ + >; + }; + + uart4_pins_default: pinmux_uart4_pins_default { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT | MUX_MODE6) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + >; + }; + + uart4_pins_sleep: pinmux_uart4_pins_sleep { + pinctrl-single,pins = < + 0xD0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data12.uart4_cts */ + 0xD4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_data13.uart4_rts */ + 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wait0.uart4_rxd */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_wpn.uart4_txd */ + >; + }; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc2_pins &wlan_pins>; + pinctrl-1 = <&mmc2_pins_sleep &wlan_pins_sleep>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart4_pins_default>; + pinctrl-1 = <&uart4_pins_sleep>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts new file mode 100644 index 0000000000000..348189a38e46d --- /dev/null +++ b/arch/arm/boot/dts/am335x-boneblack-wl1835mod.dts @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&rtc { + system-power-controller; +}; + +/* EMMC in reset */ +&gpio1 { + emmc_rst { + gpio-hog; + gpios = <20 0>; + output-high; + line-name = "EMMC ResetN"; + }; +}; + +#include "am335x-boneblack-wl1835mod-cape.dtsi" diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 34c9928db694c..eea656219b286 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -104,6 +104,10 @@ rx-num-evt = <1>; }; +&rtc { + system-power-controller; +}; + / { hdmi { compatible = "ti,tilcdc,slave"; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts new file mode 100644 index 0000000000000..69879ad0f872d --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Green"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-myhomebox-common.dtsi b/arch/arm/boot/dts/am335x-myhomebox-common.dtsi new file mode 100644 index 0000000000000..d18b2b179e6f3 --- /dev/null +++ b/arch/arm/boot/dts/am335x-myhomebox-common.dtsi @@ -0,0 +1,199 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "am33xxhbox.dtsi" + +/ { + model = "MyHomebox AM335x"; + compatible = "ti,am335x-bone", "ti,am335x-boneblack","ti,am335x-myhomebox", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + am33xx_pinmux: pinmux@44e10800 { + pinctrl-names = "default"; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 0x70 /* i2c0_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + 0x18c 0x70 /* i2c0_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + >; + }; + + + }; + + ocp: ocp { + + uart1: serial@44e09000 { + status = "okay"; + }; + + uart2: serial@48022000 { + status = "okay"; + }; + + uart3: serial@48024000 { + status = "okay"; + }; + + uart4: serial@481a6000 { + status = "okay"; + }; + + uart5: serial@481a8000 { + status = "okay"; + }; + + rtc@44e3e000 { + ti,system-power-controller; + }; + }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "red1"; + gpios = <&gpio2 7 0>; + default-state = "on"; + }; + + led@2 { + label = "red2"; + gpios = <&gpio1 22 0>; + default-state = "on"; + }; + + led@3 { + label = "red3"; + gpios = <&gpio1 23 0>; + default-state = "on"; + }; + + + led@4 { + label = "blue1"; + gpios = <&gpio2 4 0>; + default-state = "off"; + }; + + led@5 { + label = "blue2"; + gpios = <&gpio2 5 0>; + default-state = "off"; + }; + + led@6 { + label = "blue3"; + gpios = <&gpio2 6 0>; + default-state = "off"; + }; + }; + +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + tps: tps@24 { + reg = <0x24>; + }; + +}; + +/include/ "tps65217.dtsi" + +&tps { + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + dcdc1_reg: regulator@0 { + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-always-on; + }; + }; + +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; +}; + + +&edma { + ti,edma-xbar-event-map = <32 12>, /* gpevt2 -> 12 */ + <30 20>; /* xdma_event_intr2 -> 20 */ +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&usb_otg_hs { + interface_type = <1>; + power = <250>; + status = "okay"; +}; + + diff --git a/arch/arm/boot/dts/am335x-myhomebox.dts b/arch/arm/boot/dts/am335x-myhomebox.dts new file mode 100644 index 0000000000000..a304ff822c410 --- /dev/null +++ b/arch/arm/boot/dts/am335x-myhomebox.dts @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "am33xxhbox.dtsi" + +/include/ "am335x-myhomebox-common.dtsi" + +&am33xx_pinmux { + +}; + +&ldo3_reg{ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&ldo2_reg{ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&ldo4_reg{ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + + + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + bus-width = <0x4>; + cd-gpios = <&gpio3 15 1>; /* gpio1 is misnamed, 0 == GPIO_ACTIVE_HIGH */ + cd-inverted; + status = "okay"; + vmmc-supply = <&ldo2_reg>; + ti,vcc-aux-disable-is-sleep; +}; + + +&cpu { + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + 600000 1125000 + 300000 975000 + >; +}; diff --git a/arch/arm/boot/dts/am335x-myhomebox4-common.dtsi b/arch/arm/boot/dts/am335x-myhomebox4-common.dtsi new file mode 100644 index 0000000000000..0ea61f1c0c275 --- /dev/null +++ b/arch/arm/boot/dts/am335x-myhomebox4-common.dtsi @@ -0,0 +1,326 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + + led@1 { + label = "homebox:red:led1"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led@2 { + label = "homebox:red:led2"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led@3 { + label = "homebox:red:led3"; + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led@4 { + label = "homebox:blue:led1"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@5 { + label = "homebox:blue:led2"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@6 { + label = "homebox:blue:led3"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + }; + +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + 0x188 0x70 /* i2c0_sda, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + 0x18c 0x70 /* i2c0_scl, SLEWCTRL_SLOW | INPUT_PULLUP | MODE0 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x108 (PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */ + 0x10c (PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + >; + }; + +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + +}; + +/include/ "tps65217.dtsi" + +&tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + ti,pmic-shutdown-controller; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; + +&wkup_m3_ipc { + ti,scale-data-fw = "am335x-bone-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-myhomebox4.dts b/arch/arm/boot/dts/am335x-myhomebox4.dts new file mode 100644 index 0000000000000..135372a3526b7 --- /dev/null +++ b/arch/arm/boot/dts/am335x-myhomebox4.dts @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-myhomebox4-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Black"; + compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + ocp: ocp { + + uart0: serial@44e09000 { + status = "okay"; + }; + + uart1: serial@48022000 { + status = "okay"; + }; + + uart2: serial@48024000 { + status = "okay"; + }; + + uart3: serial@481a6000 { + status = "okay"; + }; + + uart4: serial@481a8000 { + status = "okay"; + }; + + }; + + mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + bus-width = <0x4>; + cd-gpios = <&gpio3 15 1>; /* gpio1 is misnamed, 0 == GPIO_ACTIVE_HIGH */ + cd-inverted; + status = "okay"; + vmmc-supply = <&ldo2_reg>; + ti,vcc-aux-disable-is-sleep; + }; + + +}; + +&ldo3_reg{ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&ldo2_reg{ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&ldo4_reg{ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&rtc { + system-power-controller; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + bus-width = <0x4>; + cd-gpios = <&gpio3 15 1>; /* gpio1 is misnamed, 0 == GPIO_ACTIVE_HIGH */ + cd-inverted; + status = "okay"; + vmmc-supply = <&ldo2_reg>; + ti,vcc-aux-disable-is-sleep; +}; diff --git a/arch/arm/boot/dts/am33xx-hbox4.dtsi b/arch/arm/boot/dts/am33xx-hbox4.dtsi new file mode 100644 index 0000000000000..37c2f0a89ef24 --- /dev/null +++ b/arch/arm/boot/dts/am33xx-hbox4.dtsi @@ -0,0 +1,813 @@ +/* + * Device Tree Source for AM33XX SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include + +#include "skeleton.dtsi" + +/ { + compatible = "ti,am33xx"; + interrupt-parent = <&intc>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + d_can0 = &dcan0; + d_can1 = &dcan1; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + + voltage-tolerance = <2>; /* 2 percentage */ + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + sram = <&ocmcram>; + }; + }; + + /* + * XXX: Use a flat representation of the AM33XX interconnect. + * The real AM33XX interconnect network is quite complex. Since + * it will not bring real advantage to represent that in DT + * for the moment, just use a fake OCP bus entry to represent + * the whole bus hierarchy. + */ + ocp: ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + l4_wkup: l4_wkup@44c00000 { + compatible = "ti,am3-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44c00000 0x280000>; + + wkup_m3: wkup_m3@100000 { + compatible = "ti,am3352-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; + + prcm: prcm@200000 { + compatible = "ti,am3-prcm"; + reg = <0x200000 0x4000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scm: scm@210000 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x210000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x2000>; + + am33xx_pinmux: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + + scm_clockdomains: clockdomains { + }; + }; + }; + + intc: interrupt-controller@48200000 { + compatible = "ti,am33xx-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48200000 0x1000>; + }; + + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x40>; + interrupts = <12 13 14>; + #dma-cells = <1>; + }; + + emif: emif@4c000000 { + compatible = "ti,emif-am3352"; + reg = <0x4C000000 0x1000>; + sram = <&ocmcram>; + }; + + gpio0: gpio@44e07000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x44e07000 0x1000>; + interrupts = <96>; + }; + + gpio1: gpio@4804c000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4804c000 0x1000>; + interrupts = <98>; + }; + + gpio2: gpio@481ac000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x481ac000 0x1000>; + interrupts = <32>; + }; + + gpio3: gpio@481ae000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x481ae000 0x1000>; + interrupts = <62>; + }; + + uart0: serial@44e09000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + reg = <0x44e09000 0x2000>; + interrupts = <72>; + status = "disabled"; + dmas = <&edma 26>, <&edma 27>; + dma-names = "tx", "rx"; + }; + + uart1: serial@48022000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupts = <73>; + status = "disabled"; + dmas = <&edma 28>, <&edma 29>; + dma-names = "tx", "rx"; + }; + + uart2: serial@48024000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + reg = <0x48024000 0x2000>; + interrupts = <74>; + status = "disabled"; + dmas = <&edma 30>, <&edma 31>; + dma-names = "tx", "rx"; + }; + + uart3: serial@481a6000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + reg = <0x481a6000 0x2000>; + interrupts = <44>; + status = "disabled"; + }; + + uart4: serial@481a8000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + reg = <0x481a8000 0x2000>; + interrupts = <45>; + status = "disabled"; + }; + + uart5: serial@481aa000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + reg = <0x481aa000 0x2000>; + interrupts = <46>; + status = "disabled"; + }; + + i2c0: i2c@44e0b000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + reg = <0x44e0b000 0x1000>; + interrupts = <70>; + status = "disabled"; + }; + + i2c1: i2c@4802a000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + interrupts = <71>; + status = "disabled"; + }; + + i2c2: i2c@4819c000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + reg = <0x4819c000 0x1000>; + interrupts = <30>; + status = "disabled"; + }; + + mmc1: mmc@48060000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + interrupts = <64>; + interrupt-parent = <&intc>; + reg = <0x48060000 0x1000>; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + interrupts = <28>; + interrupt-parent = <&intc>; + reg = <0x481d8000 0x1000>; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + interrupts = <29>; + interrupt-parent = <&intc>; + reg = <0x47810000 0x1000>; + status = "disabled"; + }; + + hwspinlock: spinlock@480ca000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x480ca000 0x1000>; + ti,hwmods = "spinlock"; + #hwlock-cells = <1>; + }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x44e35000 0x1000>; + interrupts = <91>; + }; + + dcan0: can@481cc000 { + compatible = "ti,am3352-d_can"; + ti,hwmods = "d_can0"; + reg = <0x481cc000 0x2000>; + clocks = <&dcan0_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 0>; + interrupts = <52>; + status = "disabled"; + }; + + dcan1: can@481d0000 { + compatible = "ti,am3352-d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + clocks = <&dcan1_fck>; + clock-names = "fck"; + syscon-raminit = <&scm_conf 0x644 1>; + interrupts = <55>; + status = "disabled"; + }; + + mailbox: mailbox@480C8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <77>; + ti,hwmods = "mailbox"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; + }; + + timer1: timer@44e31000 { + compatible = "ti,am335x-timer-1ms"; + reg = <0x44e31000 0x400>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,am335x-timer"; + reg = <0x48040000 0x400>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,am335x-timer"; + reg = <0x48042000 0x400>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,am335x-timer"; + reg = <0x48044000 0x400>; + interrupts = <92>; + ti,hwmods = "timer4"; + ti,timer-pwm; + }; + + timer5: timer@48046000 { + compatible = "ti,am335x-timer"; + reg = <0x48046000 0x400>; + interrupts = <93>; + ti,hwmods = "timer5"; + ti,timer-pwm; + }; + + timer6: timer@48048000 { + compatible = "ti,am335x-timer"; + reg = <0x48048000 0x400>; + interrupts = <94>; + ti,hwmods = "timer6"; + ti,timer-pwm; + }; + + timer7: timer@4804a000 { + compatible = "ti,am335x-timer"; + reg = <0x4804a000 0x400>; + interrupts = <95>; + ti,hwmods = "timer7"; + ti,timer-pwm; + }; + + pruss: pruss@4a300000 { + compatible = "ti,pruss-v2"; + ti,hwmods = "pruss"; + ti,deassert-hard-reset = "pruss", "pruss"; + reg = <0x4a300000 0x080000>; + ti,pintc-offset = <0x20000>; + interrupt-parent = <&intc>; + status = "disabled"; + interrupts = <20 21 22 23 24 25 26 27>; + }; + + rtc: rtc@44e3e000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <75 + 76>; + ti,hwmods = "rtc"; + }; + + spi0: spi@48030000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48030000 0x400>; + interrupts = <65>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi0"; + dmas = <&edma 16 + &edma 17 + &edma 18 + &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x481a0000 0x400>; + interrupts = <125>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi1"; + dmas = <&edma 42 + &edma 43 + &edma 44 + &edma 45>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + + usb_otg_hs: usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <1>; + port1-mode = <1>; /* HOST - SEE am33xx-usb.txt */ + power = <500>; + ti,hwmods = "usb_otg_hs"; + status = "disabled"; + }; + + epwmss0: epwmss@48300000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48300100 0x48300100 0x80 /* ECAP */ + 0x48300180 0x48300180 0x80 /* EQEP */ + 0x48300200 0x48300200 0x80>; /* EHRPWM */ + + ecap0: ecap@48300100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48300100 0x80>; + interrupts = <31>; + interrupt-names = "ecap0"; + ti,hwmods = "ecap0"; + status = "disabled"; + }; + + ehrpwm0: ehrpwm@48300200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48300200 0x80>; + ti,hwmods = "ehrpwm0"; + status = "disabled"; + }; + + eqep0: eqep@0x48300180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48300180 0x80>; + interrupt-parent = <&intc>; + interrupts = <79>; + ti,hwmods = "eqep0"; + status = "disabled"; + }; + }; + + epwmss1: epwmss@48302000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48302000 0x10>; + ti,hwmods = "epwmss1"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48302100 0x48302100 0x80 /* ECAP */ + 0x48302180 0x48302180 0x80 /* EQEP */ + 0x48302200 0x48302200 0x80>; /* EHRPWM */ + + ecap1: ecap@48302100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48302100 0x80>; + interrupts = <47>; + interrupt-names = "ecap1"; + ti,hwmods = "ecap1"; + status = "disabled"; + }; + + ehrpwm1: ehrpwm@48302200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48302200 0x80>; + ti,hwmods = "ehrpwm1"; + status = "disabled"; + }; + + eqep1: eqep@0x48302180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48302180 0x80>; + interrupt-parent = <&intc>; + interrupts = <88>; + ti,hwmods = "eqep1"; + status = "disabled"; + }; + }; + + epwmss2: epwmss@48304000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48304000 0x10>; + ti,hwmods = "epwmss2"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48304100 0x48304100 0x80 /* ECAP */ + 0x48304180 0x48304180 0x80 /* EQEP */ + 0x48304200 0x48304200 0x80>; /* EHRPWM */ + + ecap2: ecap@48304100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48304100 0x80>; + interrupts = <61>; + interrupt-names = "ecap2"; + ti,hwmods = "ecap2"; + status = "disabled"; + }; + + ehrpwm2: ehrpwm@48304200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48304200 0x80>; + ti,hwmods = "ehrpwm2"; + status = "disabled"; + }; + + eqep2: eqep@0x48304180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48304180 0x80>; + interrupt-parent = <&intc>; + interrupts = <89>; + ti,hwmods = "eqep2"; + status = "disabled"; + }; + }; + + mac: ethernet@4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x4a100000 0x800 + 0x4a101200 0x100>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges; + syscon = <&scm_conf>; + status = "disabled"; + + davinci_mdio: mdio@4a101000 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x4a101000 0x100>; + status = "disabled"; + }; + + cpsw_emac0: slave@4a100200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@4a100300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + }; + }; + + ocmcram: ocmcram@40300000 { + compatible = "mmio-sram"; + reg = <0x40300000 0x10000>; /* 64k */ + map-exec; + }; + + elm: elm@48080000 { + compatible = "ti,am3352-elm"; + reg = <0x48080000 0x2000>; + interrupts = <4>; + ti,hwmods = "elm"; + status = "disabled"; + }; + + lcdc: lcdc@4830e000 { + compatible = "ti,am33xx-tilcdc"; + reg = <0x4830e000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <36>; + ti,hwmods = "lcdc"; + status = "disabled"; + }; + + tscadc: tscadc@44e0d000 { + compatible = "ti,am3359-tscadc"; + reg = <0x44e0d000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <16>; + ti,hwmods = "adc_tsc"; + status = "disabled"; + + tsc { + compatible = "ti,am3359-tsc"; + }; + am335x_adc: adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + ti,no-idle-on-init; + reg = <0x50000000 0x2000>; + interrupts = <100>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; + }; + + sham: sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; + + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + reg = <0x53500000 0xa0>; + interrupts = <103>; + dmas = <&edma 6>, + <&edma 5>; + dma-names = "tx", "rx"; + }; + + mcasp0: mcasp@48038000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp0"; + reg = <0x48038000 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <80>, <81>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 8>, + <&edma 9>; + dma-names = "tx", "rx"; + }; + + mcasp1: mcasp@4803C000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp1"; + reg = <0x4803C000 0x2000>, + <0x46400000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <82>, <83>; + interrupt-names = "tx", "rx"; + status = "disabled"; + dmas = <&edma 10>, + <&edma 11>; + dma-names = "tx", "rx"; + }; + + rng: rng@48310000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48310000 0x2000>; + interrupts = <111>; + }; + + sgx@0x56000000 { + compatible = "ti,sgx"; + ti,hwmods = "gfx"; + reg = <0x56000000 0x1000000>; + interrupts = <37>; + }; + }; +}; + +/include/ "am33xx-clocks.dtsi" diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 410d0a7d6f7c3..b2e3966f170b0 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -79,7 +79,7 @@ * for the moment, just use a fake OCP bus entry to represent * the whole bus hierarchy. */ - ocp { + ocp: ocp { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -454,6 +454,17 @@ ti,timer-pwm; }; + pruss: pruss@4a300000 { + compatible = "ti,pruss-v2"; + ti,hwmods = "pruss"; + ti,deassert-hard-reset = "pruss", "pruss"; + reg = <0x4a300000 0x080000>; + ti,pintc-offset = <0x20000>; + interrupt-parent = <&intc>; + status = "disabled"; + interrupts = <20 21 22 23 24 25 26 27>; + }; + rtc: rtc@44e3e000 { compatible = "ti,am3352-rtc", "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; @@ -650,6 +661,15 @@ ti,hwmods = "ehrpwm0"; status = "disabled"; }; + + eqep0: eqep@0x48300180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48300180 0x80>; + interrupt-parent = <&intc>; + interrupts = <79>; + ti,hwmods = "eqep0"; + status = "disabled"; + }; }; epwmss1: epwmss@48302000 { @@ -680,6 +700,15 @@ ti,hwmods = "ehrpwm1"; status = "disabled"; }; + + eqep1: eqep@0x48302180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48302180 0x80>; + interrupt-parent = <&intc>; + interrupts = <88>; + ti,hwmods = "eqep1"; + status = "disabled"; + }; }; epwmss2: epwmss@48304000 { @@ -710,6 +739,15 @@ ti,hwmods = "ehrpwm2"; status = "disabled"; }; + + eqep2: eqep@0x48304180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48304180 0x80>; + interrupt-parent = <&intc>; + interrupts = <89>; + ti,hwmods = "eqep2"; + status = "disabled"; + }; }; mac: ethernet@4a100000 { @@ -876,6 +914,13 @@ reg = <0x48310000 0x2000>; interrupts = <111>; }; + + sgx@0x56000000 { + compatible = "ti,sgx"; + ti,hwmods = "gfx"; + reg = <0x56000000 0x1000000>; + interrupts = <37>; + }; }; }; diff --git a/arch/arm/boot/dts/am33xxhbox.dtsi b/arch/arm/boot/dts/am33xxhbox.dtsi new file mode 100644 index 0000000000000..d6391dcab9551 --- /dev/null +++ b/arch/arm/boot/dts/am33xxhbox.dtsi @@ -0,0 +1,703 @@ +/* + * Device Tree Source for AM33XX SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,am33xx"; + interrupt-parent = <&intc>; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + cpu: cpu@0 { + compatible = "arm,cortex-a8"; + + /* + * To consider voltage drop between PMIC and SoC, + * tolerance value is reduced to 2% from 4% and + * voltage value is increased as a precaution. + */ + operating-points = < + /* kHz uV */ + /* ES 2.0 Nitro and Turbo OPPs" + 1000000 1350000 + 800000 1300000 + */ + 600000 1225000 + 500000 1125000 + 275000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + am33xx_pinmux: pinmux@44e10800 { + compatible = "pinctrl-single"; + reg = <0x44e10800 0x0238>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7f>; + }; + + /* + * XXX: Use a flat representation of the AM33XX interconnect. + * The real AM33XX interconnect network is quite complex.Since + * that will not bring real advantage to represent that in DT + * for the moment, just use a fake OCP bus entry to represent + * the whole bus hierarchy. + */ + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@48200000 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <128>; + reg = <0x48200000 0x1000>; + }; + + sgx@0x56000000 { + compatible = "ti,sgx"; + ti,hwmods = "gfx"; + clock-frequency = <200000000>; + reg = <0x56000000 0x1000000>; + interrupts = <37>; + }; + + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x40>; + interrupt-parent = <&intc>; + interrupts = <12 13 14>; + #dma-cells = <1>; + dma-channels = <64>; + ti,edma-regions = <4>; + ti,edma-slots = <256>; + ti,edma-queue-tc-map = <0 0 + 1 1 + 2 2>; + ti,edma-queue-priority-map = <0 0 + 1 1 + 2 2>; + ti,edma-default-queue = <1>; + }; + + gpio1: gpio@44e07000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x44e07000 0x1000>; + interrupts = <96>; + }; + + gpio2: gpio@4804c000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x4804c000 0x1000>; + interrupts = <98>; + }; + + gpio3: gpio@481ac000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x481ac000 0x1000>; + interrupts = <32>; + }; + + gpio4: gpio@481ae000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x481ae000 0x1000>; + interrupts = <62>; + }; + + /* reset controller comes first (even if disabled) */ + rstctl: rstctl@0 { + status = "disabled"; + }; + + uart1: serial@44e09000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + reg = <0x44e09000 0x2000>; + interrupts = <72>; + status = "disabled"; + }; + + uart2: serial@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupts = <73>; + status = "disabled"; + }; + + uart3: serial@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + reg = <0x48024000 0x2000>; + interrupts = <74>; + status = "disabled"; + }; + + uart4: serial@481a6000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + reg = <0x481a6000 0x2000>; + interrupts = <44>; + status = "disabled"; + }; + + uart5: serial@481a8000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + reg = <0x481a8000 0x2000>; + interrupts = <45>; + status = "disabled"; + }; + + uart6: serial@481aa000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + reg = <0x481aa000 0x2000>; + interrupts = <46>; + status = "disabled"; + }; + + i2c0: i2c@44e0b000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; /* TODO: Fix hwmod */ + reg = <0x44e0b000 0x1000>; + interrupts = <70>; + status = "disabled"; + }; + + i2c1: i2c@4802a000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; /* TODO: Fix hwmod */ + reg = <0x4802a000 0x1000>; + interrupts = <71>; + status = "disabled"; + }; + + i2c2: i2c@4819c000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; /* TODO: Fix hwmod */ + reg = <0x4819c000 0x1000>; + interrupts = <30>; + status = "disabled"; + }; + + mmc1: mmc@48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + ti,needs-special-hs-handling; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + ti,needs-special-hs-handling; + status = "disabled"; + }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x44e35000 0x1000>; + interrupts = <91>; + }; + + dcan0: d_can@481cc000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can0"; + reg = <0x481cc000 0x2000>; + interrupts = <52>; + status = "disabled"; + }; + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + status = "disabled"; + }; + + timer1: timer@44e31000 { + compatible = "ti,omap2-timer"; + reg = <0x44e31000 0x400>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + timer2: timer@48040000 { + compatible = "ti,omap2-timer"; + reg = <0x48040000 0x400>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@48042000 { + compatible = "ti,omap2-timer"; + reg = <0x48042000 0x400>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + timer4: timer@48044000 { + compatible = "ti,omap2-timer"; + reg = <0x48044000 0x400>; + interrupts = <92>; + ti,hwmods = "timer4"; + ti,timer-pwm; + }; + + timer5: timer@48046000 { + compatible = "ti,omap2-timer"; + reg = <0x48046000 0x400>; + interrupts = <93>; + ti,hwmods = "timer5"; + ti,timer-pwm; + }; + + timer6: timer@48048000 { + compatible = "ti,omap2-timer"; + reg = <0x48048000 0x400>; + interrupts = <94>; + ti,hwmods = "timer6"; + ti,timer-pwm; + }; + + timer7: timer@4804a000 { + compatible = "ti,omap2-timer"; + reg = <0x4804a000 0x400>; + interrupts = <95>; + ti,hwmods = "timer7"; + ti,timer-pwm; + }; + + pruss: pruss@4a300000 { + compatible = "ti,pruss-v2"; + ti,hwmods = "pruss"; + ti,deassert-hard-reset = "pruss", "pruss"; + reg = <0x4a300000 0x080000>; + ti,pintc-offset = <0x20000>; + interrupt-parent = <&intc>; + status = "disabled"; + interrupts = <20 21 22 23 24 25 26 27>; + }; + + rtc@44e3e000 { + compatible = "ti,da830-rtc"; + reg = <0x44e3e000 0x1000>; + interrupts = <75 + 76>; + ti,hwmods = "rtc"; + }; + + spi0: spi@48030000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x48030000 0x400>; + interrupt = <65>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi0"; + dmas = <&edma 16 + &edma 17 + &edma 18 + &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + + spi1: spi@481a0000 { + compatible = "ti,omap4-mcspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x481a0000 0x400>; + interrupt = <125>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi1"; + dmas = <&edma 42 + &edma 43 + &edma 44 + &edma 45>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x01000000>; + interrupts = <100>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + + status = "disabled"; + }; + + nop-phy@0 { + compatible = "nop-xceiv-usb"; + }; + + nop-phy@1 { + compatible = "nop-xceiv-usb"; + }; + + usb_otg_hs: usb@47400000 { + compatible = "ti,musb-am33xx"; + reg = <0x47400000 0x1000 /* usbss */ + 0x47401000 0x800 /* musb instance 0 */ + 0x47401800 0x800>; /* musb instance 1 */ + interrupts = <17 /* usbss */ + 18 /* musb instance 0 */ + 19>; /* musb instance 1 */ + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + port0-mode = <1>; + port1-mode = <1>; /* HOST - SEE am33xx-usb.txt */ + power = <500>; + ti,hwmods = "usb_otg_hs"; + status = "disabled"; + }; + + mac: ethernet@4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + cpts_active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x4a100000 0x800 + 0x4a101200 0x100>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges; + disable-napi; + + davinci_mdio: mdio@4a101000 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x4a101000 0x100>; + }; + + cpsw_emac0: slave@4a100200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@4a100300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + tscadc: tscadc@44e0d000 { + compatible = "ti,ti-tscadc"; + reg = <0x44e0d000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <16>; + ti,hwmods = "adc_tsc"; + status = "disabled"; + }; + + lcdc: lcdc@4830e000 { + compatible = "ti,am3352-lcdc", "ti,da830-lcdc"; + reg = <0x4830e000 0x1000>; + interrupts = <36>; + status = "disabled"; + ti,hwmods = "lcdc"; + }; + + epwmss0: epwmss@48300000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48300100 0x48300100 0x80 /* ECAP */ + 0x48300180 0x48300180 0x80 /* EQEP */ + 0x48300200 0x48300200 0x80>; /* EHRPWM */ + + ecap0: ecap@48300100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48300100 0x80>; + ti,hwmods = "ecap0"; + status = "disabled"; + }; + + ehrpwm0: ehrpwm@48300200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48300200 0x80>; + ti,hwmods = "ehrpwm0"; + status = "disabled"; + }; + + eqep0: eqep@0x48300180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48300180 0x80>; + interrupt-parent = <&intc>; + interrupts = <79>; + ti,hwmods = "eqep0"; + status = "disabled"; + }; + }; + + epwmss1: epwmss@48302000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48302000 0x10>; + ti,hwmods = "epwmss1"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48302100 0x48302100 0x80 /* ECAP */ + 0x48302180 0x48302180 0x80 /* EQEP */ + 0x48302200 0x48302200 0x80>; /* EHRPWM */ + + ecap1: ecap@48302100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48302100 0x80>; + ti,hwmods = "ecap1"; + status = "disabled"; + }; + + ehrpwm1: ehrpwm@48302200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48302200 0x80>; + ti,hwmods = "ehrpwm1"; + status = "disabled"; + }; + + eqep1: eqep@0x48302180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48302180 0x80>; + interrupt-parent = <&intc>; + interrupts = <88>; + ti,hwmods = "eqep1"; + status = "disabled"; + }; + }; + + epwmss2: epwmss@48304000 { + compatible = "ti,am33xx-pwmss"; + reg = <0x48304000 0x10>; + ti,hwmods = "epwmss2"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48304100 0x48304100 0x80 /* ECAP */ + 0x48304180 0x48304180 0x80 /* EQEP */ + 0x48304200 0x48304200 0x80>; /* EHRPWM */ + + ecap2: ecap@48304100 { + compatible = "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48304100 0x80>; + ti,hwmods = "ecap2"; + status = "disabled"; + }; + + ehrpwm2: ehrpwm@48304200 { + compatible = "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48304200 0x80>; + ti,hwmods = "ehrpwm2"; + status = "disabled"; + }; + + eqep2: eqep@0x48304180 { + compatible = "ti,am33xx-eqep"; + reg = <0x48304180 0x80>; + interrupt-parent = <&intc>; + interrupts = <89>; + ti,hwmods = "eqep2"; + status = "disabled"; + }; + }; + + sham: sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x53100000 0x200>; + interrupt-parent = <&intc>; + interrupts = <109>; + dmas = <&edma 36>; + dma-names = "rx"; + }; + + aes: aes@53500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x53500000 0xa0>; + interrupt-parent = <&intc>; + interrupts = <102>; + dmas = <&edma 6 + &edma 5>; + dma-names = "tx", "rx"; + }; + + mcasp0: mcasp@48038000 { + compatible = "ti,omap2-mcasp-audio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcasp0"; + reg = <0x48038000 0x2000>; + interrupts = <80 81>; + status = "disabled"; + asp-chan-q = <2>; /* EVENTQ_2 */ + tx-dma-offset = <0x46000000>; + rx-dma-offset = <0x46000000>; + dmas = <&edma 8 + &edma 9>; + dma-names = "tx", "rx"; + }; + + mcasp1: mcasp@4803C000 { + compatible = "ti,omap2-mcasp-audio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcasp1"; + reg = <0x4803C000 0x2000>; + interrupts = <82 83>; + status = "disabled"; + asp-chan-q = <2>; /* EVENTQ_2 */ + tx-dma-offset = <0x46400000>; + rx-dma-offset = <0x46400000>; + dmas = <&edma 10 + &edma 11>; + dma-names = "tx", "rx"; + }; + + bandgap@44e10448 { + compatible = "ti,am335x-bandgap"; + reg = <0x44e10448 0x8>; + }; + + rng: rng@483100000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48310000 0x2000>; + interrupts = <111>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index a1c1cba2dfe26..48c6cf13bcc3e 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "dra74x.dtsi" +#include "am57xx-cmem.dtsi" #include #include diff --git a/arch/arm/boot/dts/am57xx-cmem.dtsi b/arch/arm/boot/dts/am57xx-cmem.dtsi new file mode 100644 index 0000000000000..8feab8acef5c8 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-cmem.dtsi @@ -0,0 +1,28 @@ +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cmem_block_mem_0: cmem_block_mem@a0000000 { + reg = <0xa0000000 0x20000000>; + no-map; + status = "okay"; + }; + }; + + cmem { + compatible = "ti,cmem"; + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + cmem_block_0: cmem_block@0 { + reg = <0>; + memory-region = <&cmem_block_mem_0>; + cmem-buf-pools = <1 0x20000000>; + }; + }; +}; + diff --git a/arch/arm/configs/bb.org_defconfig b/arch/arm/configs/bb.org_defconfig new file mode 100644 index 0000000000000..eb16e70d47558 --- /dev/null +++ b/arch/arm/configs/bb.org_defconfig @@ -0,0 +1,6363 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm 4.1.3 Kernel Configuration +# +CONFIG_ARM=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_BANDGAP=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_GENERIC_BUG=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_LZ4=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_XZ is not set +CONFIG_KERNEL_LZO=y +# CONFIG_KERNEL_LZ4 is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_FHANDLE=y +CONFIG_USELIB=y +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_HANDLE_DOMAIN_IRQ=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y + +# +# RCU Subsystem +# +CONFIG_PREEMPT_RCU=y +CONFIG_SRCU=y +# CONFIG_TASKS_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_RCU_USER_QS is not set +CONFIG_RCU_FANOUT=32 +CONFIG_RCU_FANOUT_LEAF=16 +# CONFIG_RCU_FANOUT_EXACT is not set +CONFIG_RCU_FAST_NO_HZ=y +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_BOOST is not set +CONFIG_RCU_KTHREAD_PRIO=0 +# CONFIG_RCU_NOCB_CPU is not set +# CONFIG_RCU_EXPEDITE_BOOT is not set +CONFIG_BUILD_BIN2C=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +# CONFIG_MEMCG_SWAP_ENABLED is not set +# CONFIG_MEMCG_KMEM is not set +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CHECKPOINT_RESTORE=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_BPF=y +CONFIG_EXPERT=y +CONFIG_UID16=y +CONFIG_MULTIUSER=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_BPF_SYSCALL=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +CONFIG_PCI_QUIRKS=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_SYSTEM_TRUSTED_KEYRING is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_UPROBES=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR_NONE is not set +CONFIG_CC_STACKPROTECTOR_REGULAR=y +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OLD_SIGACTION=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_AIX_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_CMDLINE_PARTITION is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PADATA=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_LPC32XX is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_SHMOBILE_LEGACY is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C24XX is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP1 is not set + +# +# Multiple platform selection +# + +# +# CPU Core family selection +# +# CONFIG_ARCH_MULTI_V6 is not set +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_MULTI_V6_V7=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +# CONFIG_ARCH_VIRT is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCM is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_DIGICOLOR is not set +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_KEYSTONE is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_MEDIATEK is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Common Features +# + +# +# OMAP Feature Selections +# +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_PM_NOOP=y +CONFIG_MACH_OMAP_GENERIC=y + +# +# TI OMAP/AM/DM/DRA Family +# +# CONFIG_ARCH_OMAP3 is not set +# CONFIG_ARCH_OMAP4 is not set +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y +CONFIG_ARCH_OMAP2PLUS=y +CONFIG_OMAP_INTERCONNECT_BARRIER=y + +# +# TI OMAP2/3/4 Specific Features +# +CONFIG_ARCH_OMAP2PLUS_TYPICAL=y +CONFIG_SOC_HAS_OMAP2_SDRC=y +CONFIG_SOC_HAS_REALTIME_COUNTER=y + +# +# OMAP Legacy Platform Data Board Type +# +CONFIG_AMX3_PM=y +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_SOCFPGA is not set +# CONFIG_PLAT_SPEAR is not set +# CONFIG_ARCH_STI is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_SHMOBILE_MULTI is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_SIRF is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_WM8850 is not set +# CONFIG_ARCH_ZYNQ is not set + +# +# Processor Type +# +CONFIG_CPU_V7=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_LPAE is not set +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_SWP_EMULATE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_KUSER_HELPERS=y +CONFIG_VDSO=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_CACHE_L2X0=y +CONFIG_PL310_ERRATA_588369=y +CONFIG_PL310_ERRATA_727915=y +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +CONFIG_ARM_HEAVY_MB=y +# CONFIG_ARM_KERNMEM_PERMS is not set +CONFIG_MULTI_IRQ_HANDLER=y +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_643719 is not set +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_754322=y +# CONFIG_ARM_ERRATA_754327 is not set +# CONFIG_ARM_ERRATA_764369 is not set +CONFIG_ARM_ERRATA_775420=y +CONFIG_ARM_ERRATA_798181=y +# CONFIG_ARM_ERRATA_773022 is not set +CONFIG_TI_PRIV_EDMA=y + +# +# Bus support +# +CONFIG_PCI=y +# CONFIG_PCI_DOMAINS_GENERIC is not set +CONFIG_PCI_SYSCALL=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set + +# +# PCI host controller drivers +# +CONFIG_PCI_DRA7XX=y +CONFIG_PCIE_DW=y +# CONFIG_PCI_HOST_GENERIC is not set +# CONFIG_PCI_LAYERSCAPE is not set +# CONFIG_PCIE_IPROC is not set +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_HAVE_SMP=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_ARM_CPU_TOPOLOGY=y +# CONFIG_SCHED_MC is not set +# CONFIG_SCHED_SMT is not set +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_HAVE_ARM_TWD=y +# CONFIG_MCPM is not set +# CONFIG_BIG_LITTLE is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y +CONFIG_ARM_PSCI=y +CONFIG_ARCH_NR_GPIO=512 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +CONFIG_HZ_FIXED=0 +CONFIG_HZ_100=y +# CONFIG_HZ_200 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_500 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HW_PERF_EVENTS=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_CLEANCACHE is not set +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +CONFIG_ZSWAP=y +CONFIG_ZPOOL=y +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +# CONFIG_PGTABLE_MAPPING is not set +# CONFIG_ZSMALLOC_STAT is not set +CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set +CONFIG_SECCOMP=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +# CONFIG_XEN is not set + +# +# Boot options +# +CONFIG_USE_OF=y +CONFIG_ATAGS=y +# CONFIG_DEPRECATED_PARAM_STRUCT is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_ARM_APPENDED_DTB is not set +CONFIG_CMDLINE="" +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_AUTO_ZRELADDR=y + +# +# CPU Power Management +# + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y + +# +# CPU frequency scaling drivers +# +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_VOLTDM=y +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set +# CONFIG_QORIQ_CPUFREQ is not set + +# +# CPU Idle +# +# CONFIG_CPU_IDLE is not set +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_COREDUMP=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_AUTOSLEEP=y +CONFIG_PM_WAKELOCKS=y +CONFIG_PM_WAKELOCKS_LIMIT=100 +CONFIG_PM_WAKELOCKS_GC=y +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_ADVANCED_DEBUG=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_SLEEP_DEBUG=y +CONFIG_APM_EMULATION=y +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_CPU_PM=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM=y +CONFIG_XFRM_ALGO=m +CONFIG_XFRM_USER=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_NET_UDP_TUNNEL=m +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +CONFIG_GENEVE=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_ACCT=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CONNTRACK_LABELS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_QUEUE_CT=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_SIP=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_REDIRECT=m +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_INET=m +CONFIG_NFT_EXTHDR=m +CONFIG_NFT_META=m +CONFIG_NFT_CT=m +CONFIG_NFT_RBTREE=m +CONFIG_NFT_HASH=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +# CONFIG_NFT_REDIR is not set +CONFIG_NFT_NAT=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m +CONFIG_NFT_COMPAT=m +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_NAT=m +CONFIG_NETFILTER_XT_TARGET_NETMAP=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPCOMP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_L2TP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_FO=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS SH scheduler +# +CONFIG_IP_VS_SH_TAB_BITS=8 + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_NF_TABLES_IPV4=m +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_REJECT_IPV4=m +CONFIG_NF_TABLES_ARP=m +CONFIG_NF_LOG_ARP=m +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_NF_TABLES_IPV6=m +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_REJECT_IPV6=m +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_NET_DCCPPROBE=m +CONFIG_IP_SCTP=m +CONFIG_NET_SCTPPROBE=m +# CONFIG_SCTP_DBG_OBJCNT is not set +CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set +CONFIG_SCTP_COOKIE_HMAC_MD5=y +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set +CONFIG_TIPC=m +CONFIG_TIPC_MEDIA_UDP=y +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +CONFIG_PHONET=m +CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_NHC=m +CONFIG_6LOWPAN_NHC_DEST=m +CONFIG_6LOWPAN_NHC_FRAGMENT=m +CONFIG_6LOWPAN_NHC_HOP=m +CONFIG_6LOWPAN_NHC_IPV6=m +CONFIG_6LOWPAN_NHC_MOBILITY=m +CONFIG_6LOWPAN_NHC_ROUTING=m +CONFIG_6LOWPAN_NHC_UDP=m +CONFIG_IEEE802154=m +CONFIG_IEEE802154_SOCKET=m +CONFIG_IEEE802154_6LOWPAN=m +# CONFIG_MAC802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=m +CONFIG_NET_CLS_BPF=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_EMATCH_CANID=m +CONFIG_NET_EMATCH_IPSET=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +# CONFIG_NET_ACT_VLAN is not set +# CONFIG_NET_ACT_BPF is not set +# CONFIG_NET_ACT_CONNMARK is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_BLA=y +CONFIG_BATMAN_ADV_DAT=y +CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y +# CONFIG_BATMAN_ADV_DEBUG is not set +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=m +CONFIG_OPENVSWITCH_VXLAN=m +CONFIG_OPENVSWITCH_GENEVE=m +# CONFIG_VSOCKETS is not set +CONFIG_NETLINK_MMAP=y +CONFIG_NETLINK_DIAG=m +CONFIG_MPLS=y +CONFIG_NET_MPLS_GSO=y +# CONFIG_MPLS_ROUTING is not set +# CONFIG_HSR is not set +# CONFIG_NET_SWITCHDEV is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_NET_TCPPROBE is not set +CONFIG_NET_DROP_MONITOR=m +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_GW=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +CONFIG_CAN_SLCAN=m +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +# CONFIG_CAN_LEDS is not set +# CONFIG_CAN_TI_HECC is not set +# CONFIG_CAN_FLEXCAN is not set +# CONFIG_CAN_GRCAN is not set +# CONFIG_CAN_RCAR is not set +CONFIG_CAN_SJA1000=m +CONFIG_CAN_SJA1000_ISA=m +# CONFIG_CAN_SJA1000_PLATFORM is not set +# CONFIG_CAN_EMS_PCI is not set +# CONFIG_CAN_PEAK_PCI is not set +# CONFIG_CAN_KVASER_PCI is not set +# CONFIG_CAN_PLX_PCI is not set +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +# CONFIG_CAN_C_CAN_PCI is not set +# CONFIG_CAN_M_CAN is not set +# CONFIG_CAN_CC770 is not set + +# +# CAN SPI interfaces +# +CONFIG_CAN_MCP251X=m + +# +# CAN USB interfaces +# +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +CONFIG_CAN_GS_USB=m +CONFIG_CAN_KVASER_USB=m +CONFIG_CAN_PEAK_USB=m +CONFIG_CAN_8DEV_USB=m +CONFIG_CAN_SOFTING=m +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_BT_LE=y +CONFIG_BT_6LOWPAN=m +# CONFIG_BT_SELFTEST is not set +CONFIG_BT_DEBUGFS=y + +# +# Bluetooth device drivers +# +CONFIG_BT_INTEL=m +CONFIG_BT_BCM=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTUSB_BCM=y +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIUART_3WIRE=y +# CONFIG_BT_HCIUART_INTEL is not set +CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +# CONFIG_BT_HCIVHCI is not set +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +CONFIG_BT_WILINK=m +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +CONFIG_RXKAD=m +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_CERTIFICATION_ONUS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RFKILL_GPIO is not set +CONFIG_NET_9P=m +CONFIG_NET_9P_VIRTIO=m +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set +CONFIG_NFC=m +CONFIG_NFC_DIGITAL=m +# CONFIG_NFC_NCI is not set +# CONFIG_NFC_HCI is not set + +# +# Near Field Communication (NFC) devices +# +CONFIG_NFC_PN533=m +# CONFIG_NFC_TRF7970A is not set +CONFIG_NFC_SIM=m +CONFIG_NFC_PORT100=m +CONFIG_HAVE_BPF_JIT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="am335x-pm-firmware.elf am335x-bone-scale-data.bin am335x-evm-scale-data.bin am43x-evm-scale-data.bin" +CONFIG_EXTRA_FIRMWARE_DIR="firmware" +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_ALLOW_DEV_COREDUMP=y +CONFIG_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_FENCE_TRACE is not set +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=24 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 + +# +# Bus devices +# +CONFIG_ARM_CCI=y +CONFIG_ARM_CCI400_COMMON=y +CONFIG_ARM_CCI400_PMU=y +# CONFIG_ARM_CCN is not set +# CONFIG_BRCMSTB_GISB_ARB is not set +CONFIG_OMAP_INTERCONNECT=y +CONFIG_OMAP_OCP2SCP=y +CONFIG_VEXPRESS_CONFIG=y +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_AR7_PARTS=m + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +CONFIG_RFD_FTL=m +CONFIG_SSFDC=m +# CONFIG_SM_FTL is not set +CONFIG_MTD_OOPS=m +CONFIG_MTD_SWAP=m +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=m +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +CONFIG_MTD_PLATRAM=m + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +CONFIG_MTD_DATAFLASH=m +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=m +CONFIG_MTD_SST25L=m +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +CONFIG_MTD_NAND_ECC=y +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_BCH=y +CONFIG_MTD_NAND_ECC_BCH=y +# CONFIG_MTD_SM_COMMON is not set +# CONFIG_MTD_NAND_DENALI is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=m +# CONFIG_MTD_NAND_OMAP_BCH is not set +# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_RICOH is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_DOCG4 is not set +# CONFIG_MTD_NAND_CAFE is not set +CONFIG_MTD_NAND_NANDSIM=m +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND_HISI504 is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +# CONFIG_MTD_ONENAND_OTP is not set +CONFIG_MTD_ONENAND_2X_PROGRAM=y + +# +# LPDDR & LPDDR2 PCM memory drivers +# +CONFIG_MTD_LPDDR=m +CONFIG_MTD_QINFO_PROBE=m +# CONFIG_MTD_LPDDR2_NVM is not set +CONFIG_MTD_SPI_NOR=m +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_BLOCK=y +CONFIG_DTC=y +CONFIG_OF=y + +# +# Device Tree and Open Firmware support +# +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_MTD=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OF_RESOLVE=y +CONFIG_OF_OVERLAY=y +CONFIG_OF_CONFIGFS=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_PARPORT=m +# CONFIG_PARPORT_PC is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_NULL_BLK=m +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +CONFIG_ZRAM=m +CONFIG_ZRAM_LZ4_COMPRESS=y +# CONFIG_ZRAM_DEBUG is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_NVME is not set +CONFIG_BLK_DEV_OSD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_PMEM is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m +# CONFIG_MG_DISK is not set +CONFIG_VIRTIO_BLK=m +CONFIG_BLK_DEV_RBD=m +# CONFIG_BLK_DEV_RSXX is not set + +# +# Misc devices +# +CONFIG_SENSORS_LIS3LV02D=m +CONFIG_AD525X_DPOT=m +CONFIG_AD525X_DPOT_I2C=m +CONFIG_AD525X_DPOT_SPI=m +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +CONFIG_ICS932S401=m +CONFIG_ENCLOSURE_SERVICES=m +# CONFIG_HP_ILO is not set +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1780=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +CONFIG_HMC6352=m +CONFIG_DS1682=m +CONFIG_TI_DAC7512=m +# CONFIG_BMP085_I2C is not set +# CONFIG_BMP085_SPI is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +CONFIG_VEXPRESS_SYSCFG=y +CONFIG_BONE_CAPEMGR=y +# CONFIG_DEV_OVERLAYMGR is not set +CONFIG_TIEQEP=m +CONFIG_C2PORT=m + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +CONFIG_TI_ST=m +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_SENSORS_LIS3_I2C=m + +# +# Altera FPGA firmware download module +# +CONFIG_ALTERA_STAPL=m + +# +# Intel MIC Bus Driver +# + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# Argus cape driver for beaglebone black +# +# CONFIG_CAPE_BONE_ARGUS is not set +CONFIG_BEAGLEBONE_PINMUX_HELPER=y +# CONFIG_ECHO is not set +# CONFIG_CXL_BASE is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_NETLINK=y +# CONFIG_SCSI_MQ_DEFAULT is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_SCSI_BNX2X_FCOE is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +CONFIG_SCSI_UFSHCD=m +# CONFIG_SCSI_UFSHCD_PCI is not set +# CONFIG_SCSI_UFSHCD_PLATFORM is not set +# CONFIG_SCSI_HPTIOP is not set +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_WD719X is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_BFA_FC is not set +CONFIG_SCSI_VIRTIO=m +# CONFIG_SCSI_CHELSIO_FCOE is not set +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_AHCI_PLATFORM=y +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +# CONFIG_MD_CLUSTER is not set +CONFIG_BCACHE=m +# CONFIG_BCACHE_DEBUG is not set +# CONFIG_BCACHE_CLOSURES_DEBUG is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_MQ_DEFAULT is not set +# CONFIG_DM_DEBUG is not set +CONFIG_DM_BUFIO=m +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_CACHE_MQ=m +CONFIG_DM_CACHE_CLEANER=m +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +CONFIG_DM_SWITCH=m +# CONFIG_DM_LOG_WRITES is not set +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +# CONFIG_TCM_USER2 is not set +CONFIG_LOOPBACK_TARGET=m +CONFIG_TCM_FC=m +CONFIG_ISCSI_TARGET=m +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_NETDEVICES=y +CONFIG_MII=m +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +# CONFIG_NET_FC is not set +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_IPVLAN is not set +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +# CONFIG_ARCNET is not set +CONFIG_ATM_DRIVERS=y +CONFIG_ATM_DUMMY=m +# CONFIG_ATM_TCP is not set +# CONFIG_ATM_LANAI is not set +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_NICSTAR is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_FORE200E is not set +# CONFIG_ATM_HE is not set +# CONFIG_ATM_SOLOS is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_AGERE=y +# CONFIG_ET131X is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +# CONFIG_NET_VENDOR_ARC is not set +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_ALX is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +# CONFIG_DM9000 is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EXAR=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_HISILICON is not set +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_IP1000 is not set +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_MLX5_CORE is not set +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_KSZ884X_PCI is not set +CONFIG_NET_VENDOR_MICROCHIP=y +CONFIG_ENC28J60=m +# CONFIG_ENC28J60_WRITEVERIFY is not set +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +CONFIG_NET_VENDOR_NATSEMI=y +# CONFIG_NATSEMI is not set +# CONFIG_NS83820 is not set +# CONFIG_NET_VENDOR_8390 is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_PACKET_ENGINE=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +# CONFIG_SFC is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=m +# CONFIG_EPIC100 is not set +CONFIG_SMC911X=m +CONFIG_SMSC911X=m +# CONFIG_SMSC911X_ARCH_HOOKS is not set +# CONFIG_SMSC9420 is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +CONFIG_TI_DAVINCI_MDIO=y +CONFIG_TI_DAVINCI_CPDMA=y +CONFIG_TI_CPSW_PHY_SEL=y +CONFIG_TI_CPSW_ALE=y +CONFIG_TI_CPSW=y +CONFIG_TI_CPTS=y +# CONFIG_TLAN is not set +# CONFIG_NET_VENDOR_VIA is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_AT803X_PHY=m +CONFIG_AMD_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=m +# CONFIG_BCM7XXX_PHY is not set +CONFIG_BCM87XX_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MICREL_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MDIO_BCM_UNIMAC is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9700=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_WLAN=y +CONFIG_LIBERTAS_THINFIRM=m +# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set +CONFIG_LIBERTAS_THINFIRM_USB=m +# CONFIG_ATMEL is not set +CONFIG_AT76C50X_USB=m +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_NET_RNDIS_WLAN=m +# CONFIG_RTL8180 is not set +CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y +# CONFIG_ADM8211 is not set +CONFIG_MAC80211_HWSIM=m +# CONFIG_MWL8K is not set +CONFIG_ATH_COMMON=m +CONFIG_ATH_CARDS=m +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m +CONFIG_ATH9K_BTCOEX_SUPPORT=y +CONFIG_ATH9K=m +CONFIG_ATH9K_PCI=y +# CONFIG_ATH9K_AHB is not set +# CONFIG_ATH9K_DEBUGFS is not set +# CONFIG_ATH9K_DYNACK is not set +# CONFIG_ATH9K_WOW is not set +CONFIG_ATH9K_RFKILL=y +# CONFIG_ATH9K_CHANNEL_CONTEXT is not set +CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_HTC=m +# CONFIG_ATH9K_HTC_DEBUGFS is not set +CONFIG_CARL9170=m +CONFIG_CARL9170_LEDS=y +CONFIG_CARL9170_WPC=y +# CONFIG_CARL9170_HWRNG is not set +CONFIG_ATH6KL=m +CONFIG_ATH6KL_SDIO=m +CONFIG_ATH6KL_USB=m +# CONFIG_ATH6KL_DEBUG is not set +# CONFIG_ATH6KL_TRACING is not set +CONFIG_AR5523=m +# CONFIG_WIL6210 is not set +CONFIG_ATH10K=m +# CONFIG_ATH10K_PCI is not set +# CONFIG_ATH10K_DEBUG is not set +# CONFIG_ATH10K_DEBUGFS is not set +# CONFIG_ATH10K_TRACING is not set +# CONFIG_WCN36XX is not set +CONFIG_B43=m +CONFIG_B43_BCMA=y +CONFIG_B43_SSB=y +CONFIG_B43_BUSES_BCMA_AND_SSB=y +# CONFIG_B43_BUSES_BCMA is not set +# CONFIG_B43_BUSES_SSB is not set +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +CONFIG_B43_SDIO=y +CONFIG_B43_BCMA_PIO=y +CONFIG_B43_PIO=y +CONFIG_B43_PHY_G=y +CONFIG_B43_PHY_N=y +CONFIG_B43_PHY_LP=y +CONFIG_B43_PHY_HT=y +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_PCI_AUTOSELECT=y +CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_HWRNG=y +CONFIG_B43LEGACY_DEBUG=y +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_BRCMUTIL=m +CONFIG_BRCMSMAC=m +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_PROTO_BCDC=y +CONFIG_BRCMFMAC_SDIO=y +CONFIG_BRCMFMAC_USB=y +# CONFIG_BRCMFMAC_PCIE is not set +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +# CONFIG_HOSTAP_PLX is not set +# CONFIG_HOSTAP_PCI is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +CONFIG_IWLWIFI=m +CONFIG_IWLWIFI_LEDS=y +CONFIG_IWLDVM=m +# CONFIG_IWLMVM is not set +CONFIG_IWLWIFI_OPMODE_MODULAR=y + +# +# Debugging Options +# +# CONFIG_IWLWIFI_DEBUG is not set +# CONFIG_IWLWIFI_DEVICE_TRACING is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_LIBERTAS_MESH=y +# CONFIG_HERMES is not set +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +# CONFIG_P54_PCI is not set +# CONFIG_P54_SPI is not set +CONFIG_P54_LEDS=y +CONFIG_RT2X00=m +# CONFIG_RT2400PCI is not set +# CONFIG_RT2500PCI is not set +# CONFIG_RT61PCI is not set +# CONFIG_RT2800PCI is not set +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +CONFIG_RT2800USB_RT3573=y +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +# CONFIG_RT2800USB_UNKNOWN is not set +CONFIG_RT2800_LIB=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_WL_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_RTL_CARDS=m +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192EE is not set +# CONFIG_RTL8821AE is not set +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +CONFIG_RTLWIFI_USB=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192C_COMMON=m +CONFIG_WL_TI=y +CONFIG_WL1251=m +CONFIG_WL1251_SPI=m +CONFIG_WL1251_SDIO=m +CONFIG_WL12XX=m +CONFIG_WL18XX=m +CONFIG_WLCORE=m +CONFIG_WLCORE_SPI=m +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +# CONFIG_MWIFIEX is not set +# CONFIG_CW1200 is not set +CONFIG_RSI_91X=m +CONFIG_RSI_DEBUGFS=y +# CONFIG_RSI_SDIO is not set +CONFIG_RSI_USB=m + +# +# WiMAX Wireless Broadband devices +# +CONFIG_WIMAX_I2400M=m +CONFIG_WIMAX_I2400M_USB=m +CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 +# CONFIG_WAN is not set +CONFIG_IEEE802154_DRIVERS=m +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m +CONFIG_INPUT_MATRIXKMAP=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADP5588=m +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +CONFIG_KEYBOARD_QT2160=m +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +CONFIG_KEYBOARD_LM8323=m +# CONFIG_KEYBOARD_LM8333 is not set +CONFIG_KEYBOARD_MAX7359=m +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_OPENCORES=m +# CONFIG_KEYBOARD_SAMSUNG is not set +CONFIG_KEYBOARD_STOWAWAY=m +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_OMAP4=m +CONFIG_KEYBOARD_TWL4030=m +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_SENTELIC=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +# CONFIG_MOUSE_SERIAL is not set +CONFIG_MOUSE_APPLETOUCH=m +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_HANWANG=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_SERIAL_WACOM4=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_PROPERTIES=y +CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_AD7877=m +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_AD7879_I2C=m +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AR1021_I2C is not set +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_DA9052 is not set +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_HAMPSHIRE=m +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_EGALAX is not set +CONFIG_TOUCHSCREEN_FUJITSU=m +# CONFIG_TOUCHSCREEN_GOODIX is not set +# CONFIG_TOUCHSCREEN_ILI210X is not set +CONFIG_TOUCHSCREEN_GUNZE=m +# CONFIG_TOUCHSCREEN_ELAN is not set +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +# CONFIG_TOUCHSCREEN_WACOM_I2C is not set +# CONFIG_TOUCHSCREEN_MAX11801 is not set +CONFIG_TOUCHSCREEN_MCS5000=m +# CONFIG_TOUCHSCREEN_MMS114 is not set +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=y +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m +# CONFIG_TOUCHSCREEN_PIXCIR is not set +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_MC13783=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_ELO=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y +CONFIG_TOUCHSCREEN_USB_NEXIO=y +CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y +CONFIG_TOUCHSCREEN_TOUCHIT213=m +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set +CONFIG_TOUCHSCREEN_TSC2005=m +CONFIG_TOUCHSCREEN_TSC2007=m +# CONFIG_TOUCHSCREEN_ST1232 is not set +CONFIG_TOUCHSCREEN_SUR40=m +# CONFIG_TOUCHSCREEN_SX8654 is not set +CONFIG_TOUCHSCREEN_TPS6507X=m +# CONFIG_TOUCHSCREEN_ZFORCE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +# CONFIG_INPUT_MC13783_PWRBUTTON is not set +CONFIG_INPUT_MMA8450=m +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +# CONFIG_INPUT_KXTJ9 is not set +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_TPS65218_PWRBUTTON is not set +# CONFIG_INPUT_AXP20X_PEK is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=m +CONFIG_INPUT_TWL4030_VIBRA=m +CONFIG_INPUT_TWL6040_VIBRA=m +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PALMAS_PWRBUTTON is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_DA9052_ONKEY is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_ALTERA_PS2=m +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +CONFIG_N_GSM=m +# CONFIG_TRACE_SINK is not set +CONFIG_DEVMEM=y +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_DMA is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_EM is not set +CONFIG_SERIAL_8250_OMAP=y +CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +# CONFIG_SERIAL_KGDB_NMI is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_CONSOLE_POLL=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OMAP is not set +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_BCM63XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# CONFIG_SERIAL_ST_ASC is not set +# CONFIG_TTY_PRINTK is not set +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +CONFIG_HVC_DRIVER=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=m +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_OMAP=m +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_HW_RANDOM_TPM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_TCG_TPM=m +CONFIG_TCG_TIS_I2C_ATMEL=m +# CONFIG_TCG_TIS_I2C_INFINEON is not set +# CONFIG_TCG_TIS_I2C_NUVOTON is not set +# CONFIG_TCG_ATMEL is not set +# CONFIG_TCG_TIS_ST33ZP24 is not set +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +CONFIG_I2C_ARB_GPIO_CHALLENGE=m +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +# CONFIG_I2C_MUX_PCA954x is not set +# CONFIG_I2C_MUX_PINCTRL is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CBUS_GPIO is not set +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +CONFIG_I2C_GPIO=y +CONFIG_I2C_OCORES=m +CONFIG_I2C_OMAP=y +CONFIG_I2C_PCA_PLATFORM=m +# CONFIG_I2C_PXA_PCI is not set +# CONFIG_I2C_RK3X is not set +CONFIG_I2C_SIMTEC=m +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_ROBOTFUZZ_OSIF=m +CONFIG_I2C_TAOS_EVM=m +CONFIG_I2C_TINY_USB=m +CONFIG_I2C_VIPERBOARD=m + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_SLAVE is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +CONFIG_SPI_BITBANG=y +CONFIG_SPI_BUTTERFLY=m +# CONFIG_SPI_CADENCE is not set +CONFIG_SPI_GPIO=y +CONFIG_SPI_LM70_LLP=m +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_OMAP24XX=m +# CONFIG_SPI_TI_QSPI is not set +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPMI is not set +CONFIG_HSI=m +CONFIG_HSI_BOARDINFO=y + +# +# HSI controllers +# + +# +# HSI clients +# +# CONFIG_HSI_CHAR is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set +# CONFIG_NTP_PPS is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PPS_CLIENT_GPIO=m + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +CONFIG_PINCTRL_AS3722=y +# CONFIG_PINCTRL_AMD is not set +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_TI_IODELAY=y +CONFIG_PINCTRL_PALMAS=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_OF_GPIO=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_OF_HELPER=y +CONFIG_GPIO_GENERIC=y + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_DWAPB is not set +# CONFIG_GPIO_EM is not set +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +CONFIG_GPIO_OMAP=y +# CONFIG_GPIO_SCH311X is not set +# CONFIG_GPIO_SYSCON is not set +# CONFIG_GPIO_VX855 is not set +# CONFIG_GPIO_ZEVIO is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=m +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set + +# +# MFD GPIO expanders +# +CONFIG_GPIO_DA9052=m +CONFIG_GPIO_PALMAS=y +# CONFIG_GPIO_TPS65910 is not set +CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_TWL6040=y + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# USB GPIO expanders +# +CONFIG_GPIO_VIPERBOARD=m +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_MATROX is not set +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m +# CONFIG_W1_MASTER_DS1WM is not set +CONFIG_W1_MASTER_GPIO=m +# CONFIG_HDQ_MASTER_OMAP is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +# CONFIG_W1_SLAVE_DS2408 is not set +# CONFIG_W1_SLAVE_DS2413 is not set +# CONFIG_W1_SLAVE_DS2406 is not set +# CONFIG_W1_SLAVE_DS2423 is not set +CONFIG_W1_SLAVE_DS2431=m +CONFIG_W1_SLAVE_DS2433=m +# CONFIG_W1_SLAVE_DS2433_CRC is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_DS2780 is not set +# CONFIG_W1_SLAVE_DS2781 is not set +# CONFIG_W1_SLAVE_DS28E04 is not set +CONFIG_W1_SLAVE_BQ27000=m +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_BQ27X00_I2C=y +CONFIG_BATTERY_BQ27X00_PLATFORM=y +# CONFIG_BATTERY_DA9052 is not set +# CONFIG_AXP288_FUEL_GAUGE is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_BATTERY_TWL4030_MADC is not set +# CONFIG_BATTERY_RX51 is not set +CONFIG_CHARGER_ISP1704=m +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_TWL4030 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_MANAGER is not set +CONFIG_CHARGER_BQ2415X=m +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_POWER_RESET is not set +CONFIG_POWER_AVS=y +CONFIG_VOLTAGE_DOMAIN=y + +# +# Voltage Domain Framework Drivers +# +CONFIG_VOLTAGE_DOMAIN_OMAP=y +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7314 is not set +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +CONFIG_SENSORS_ADM1029=m +# CONFIG_SENSORS_ADM1031 is not set +CONFIG_SENSORS_ADM9240=m +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_DA9052_ADC is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_MC13783_ADC=m +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +CONFIG_SENSORS_G760A=m +CONFIG_SENSORS_G762=m +CONFIG_SENSORS_GPIO_FAN=y +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_IT87 is not set +CONFIG_SENSORS_JC42=m +# CONFIG_SENSORS_POWR1220 is not set +CONFIG_SENSORS_LINEAGE=m +# CONFIG_SENSORS_LTC2945 is not set +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +# CONFIG_SENSORS_LTC4222 is not set +CONFIG_SENSORS_LTC4245=m +# CONFIG_SENSORS_LTC4260 is not set +CONFIG_SENSORS_LTC4261=m +CONFIG_SENSORS_MAX1111=m +CONFIG_SENSORS_MAX16065=m +# CONFIG_SENSORS_MAX1619 is not set +CONFIG_SENSORS_MAX1668=m +# CONFIG_SENSORS_MAX197 is not set +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_HTU21 is not set +# CONFIG_SENSORS_MCP3021 is not set +CONFIG_SENSORS_ADCXX=m +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM70=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +CONFIG_SENSORS_LM93=m +# CONFIG_SENSORS_LM95234 is not set +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +# CONFIG_SENSORS_PC87360 is not set +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_NCT6683=m +CONFIG_SENSORS_NCT6775=m +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +# CONFIG_SENSORS_PWM_FAN is not set +# CONFIG_SENSORS_SHT15 is not set +CONFIG_SENSORS_SHT21=m +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_SIS5595 is not set +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +CONFIG_SENSORS_EMC2103=m +CONFIG_SENSORS_EMC6W201=m +# CONFIG_SENSORS_SMSC47M1 is not set +CONFIG_SENSORS_SMSC47M192=m +# CONFIG_SENSORS_SMSC47B397 is not set +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +# CONFIG_SENSORS_SCH5636 is not set +CONFIG_SENSORS_SMM665=m +# CONFIG_SENSORS_ADC128D818 is not set +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_ADS7871=m +CONFIG_SENSORS_AMC6821=m +# CONFIG_SENSORS_INA209 is not set +# CONFIG_SENSORS_INA2XX is not set +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=y +# CONFIG_SENSORS_TMP103 is not set +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +# CONFIG_SENSORS_TWL4030_MADC is not set +# CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VIA686A is not set +CONFIG_SENSORS_VT1211=m +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +# CONFIG_SENSORS_W83L785TS is not set +CONFIG_SENSORS_W83L786NG=m +# CONFIG_SENSORS_W83627HF is not set +CONFIG_SENSORS_W83627EHF=m +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_STEP_WISE=y +# CONFIG_THERMAL_GOV_BANG_BANG is not set +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_CPU_THERMAL=y +# CONFIG_CLOCK_THERMAL is not set +# CONFIG_THERMAL_EMULATION is not set +# CONFIG_IMX_THERMAL is not set + +# +# Texas Instruments thermal drivers +# +CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_DA9052_WATCHDOG=m +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=m +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_SPROM=y +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_B43_PCI_BRIDGE=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y +# CONFIG_SSB_DRIVER_GPIO is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +CONFIG_BCMA=m +CONFIG_BCMA_BLOCKIO=y +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_PCI=y +# CONFIG_BCMA_HOST_SOC is not set +CONFIG_BCMA_DRIVER_PCI=y +# CONFIG_BCMA_DRIVER_GMAC_CMN is not set +# CONFIG_BCMA_DRIVER_GPIO is not set +# CONFIG_BCMA_DEBUG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +CONFIG_MFD_AS3722=y +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +CONFIG_MFD_AXP20X=y +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_PMIC_DA903X is not set +CONFIG_PMIC_DA9052=y +CONFIG_MFD_DA9052_SPI=y +CONFIG_MFD_DA9052_I2C=y +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +CONFIG_MFD_MC13XXX=m +CONFIG_MFD_MC13XXX_SPI=m +CONFIG_MFD_MC13XXX_I2C=m +# CONFIG_MFD_HI6421_PMIC is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_INTEL_SOC_PMIC is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MFD_VIPERBOARD=m +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_PM8921_CORE is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RTSX_PCI is not set +# CONFIG_MFD_RT5033 is not set +CONFIG_MFD_RTSX_USB=m +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_RK808 is not set +# CONFIG_MFD_RN5T618 is not set +CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +CONFIG_MFD_SYSCON=y +CONFIG_MFD_TI_AM335X_TSCADC=m +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +CONFIG_MFD_OMAP_USB_HOST=y +CONFIG_MFD_PALMAS=y +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65090 is not set +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65218=y +# CONFIG_MFD_TPS6586X is not set +CONFIG_MFD_TPS65910=y +# CONFIG_MFD_TPS65912 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_POWER=y +CONFIG_MFD_TWL4030_AUDIO=y +CONFIG_TWL6040_CORE=y +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_VEXPRESS_SYSREG=y +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +CONFIG_REGULATOR_ANATOP=m +CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_AXP20X=m +CONFIG_REGULATOR_DA9052=m +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +CONFIG_REGULATOR_MC13XXX_CORE=m +CONFIG_REGULATOR_MC13783=m +CONFIG_REGULATOR_MC13892=m +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_PBIAS=y +# CONFIG_REGULATOR_PFUZE100 is not set +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_S2MPA01=m +CONFIG_REGULATOR_S2MPS11=m +CONFIG_REGULATOR_S5M8767=m +CONFIG_REGULATOR_TI_ABB=y +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65218=y +# CONFIG_REGULATOR_TPS6524X is not set +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_VEXPRESS=m +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y +CONFIG_MEDIA_RC_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=m +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_TUNER=m +CONFIG_V4L2_MEM2MEM_DEV=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DVB=m +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_DMA_CONTIG=m +CONFIG_VIDEOBUF2_VMALLOC=m +CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_DVB_CORE=m +CONFIG_DVB_NET=y +CONFIG_TTPCI_EEPROM=m +CONFIG_DVB_MAX_ADAPTERS=8 +CONFIG_DVB_DYNAMIC_MINORS=y + +# +# Media drivers +# +CONFIG_RC_CORE=m +CONFIG_RC_MAP=m +CONFIG_RC_DECODERS=y +CONFIG_LIRC=m +CONFIG_IR_LIRC_CODEC=m +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_SANYO_DECODER=m +CONFIG_IR_SHARP_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=m +CONFIG_IR_XMP_DECODER=m +CONFIG_RC_DEVICES=y +CONFIG_RC_ATI_REMOTE=m +# CONFIG_IR_HIX5HD2 is not set +CONFIG_IR_IMON=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_IR_IGORPLUGUSB=m +CONFIG_IR_IGUANA=m +CONFIG_IR_TTUSBIR=m +CONFIG_RC_LOOPBACK=m +CONFIG_IR_GPIO_CIR=m +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_DTCS033=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STK1135=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +# CONFIG_USB_GSPCA_TOUPTEK is not set +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +CONFIG_VIDEO_CPIA2=m +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +CONFIG_VIDEO_USBTV=m + +# +# Analog TV USB devices +# +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_STK1160_COMMON=m +CONFIG_VIDEO_STK1160_AC97=y +CONFIG_VIDEO_STK1160=m +# CONFIG_VIDEO_GO7007 is not set + +# +# Analog/digital TV USB devices +# +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_AU0828_V4L2=y +CONFIG_VIDEO_AU0828_RC=y +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_RC=y +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +# CONFIG_VIDEO_TM6000 is not set + +# +# Digital TV USB devices +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_V2=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_AF9035=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_AZ6007=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_EC168=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_MXL111SF=m +CONFIG_DVB_USB_RTL28XXU=m +CONFIG_DVB_USB_DVBSKY=m +# CONFIG_DVB_TTUSB_BUDGET is not set +# CONFIG_DVB_TTUSB_DEC is not set +CONFIG_SMS_USB_DRV=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set +# CONFIG_DVB_AS102 is not set + +# +# Webcam, TV (analog/digital) USB devices +# +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_V4L2=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_EM28XX_RC=m + +# +# Software defined radio USB devices +# +CONFIG_USB_AIRSPY=m +CONFIG_USB_HACKRF=m +CONFIG_USB_MSI2500=m +# CONFIG_MEDIA_PCI_SUPPORT is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_AM437X_VPFE=m +# CONFIG_VIDEO_XILINX is not set +CONFIG_VIDEO_TI_CAL=m +CONFIG_VIDEO_TI_VIP=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m +# CONFIG_VIDEO_SH_VEU is not set +CONFIG_VIDEO_TI_VPE=m +# CONFIG_VIDEO_TI_VPE_DEBUG is not set +CONFIG_VIDEO_TI_VPDMA_HELPER=m +CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVID=m +# CONFIG_VIDEO_VIM2M is not set + +# +# Supported MMC/SDIO adapters +# +CONFIG_SMS_SDIO_DRV=m +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_TEA575X=m +CONFIG_RADIO_SI470X=y +CONFIG_USB_SI470X=m +# CONFIG_I2C_SI470X is not set +CONFIG_RADIO_SI4713=m +# CONFIG_USB_SI4713 is not set +# CONFIG_PLATFORM_SI4713 is not set +CONFIG_I2C_SI4713=m +CONFIG_USB_MR800=m +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_MAXIRADIO is not set +CONFIG_RADIO_SHARK=m +CONFIG_RADIO_SHARK2=m +CONFIG_USB_KEENE=m +CONFIG_USB_RAREMONO=m +CONFIG_USB_MA901=m +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_SAA7706H is not set +# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_WL1273 is not set + +# +# Texas Instruments WL128x FM driver (ST based) +# +CONFIG_RADIO_WL128X=m +CONFIG_MEDIA_COMMON_OPTIONS=y + +# +# common driver options +# +CONFIG_VIDEO_CX2341X=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_CYPRESS_FIRMWARE=m +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_SMS_SIANO_MDTV=m +CONFIG_SMS_SIANO_RC=y +# CONFIG_SMS_SIANO_DEBUGFS is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, frontends) +# +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_MEDIA_ATTACH=y +CONFIG_VIDEO_IR_I2C=m + +# +# Encoders, decoders, sensors and other helper chips +# + +# +# Audio decoders, processors and mixers +# +CONFIG_VIDEO_TVAUDIO=m +CONFIG_VIDEO_TDA7432=m +CONFIG_VIDEO_TDA9840=m +CONFIG_VIDEO_TEA6415C=m +CONFIG_VIDEO_TEA6420=m +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS5345=m +CONFIG_VIDEO_CS53L32A=m +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_UDA1342 is not set +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_WM8739=m +CONFIG_VIDEO_VP27SMPX=m +# CONFIG_VIDEO_SONY_BTF_MPX is not set + +# +# RDS decoders +# +CONFIG_VIDEO_SAA6588=m + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_ADV7183 is not set +# CONFIG_VIDEO_ADV7604 is not set +# CONFIG_VIDEO_ADV7842 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_ML86V7667 is not set +# CONFIG_VIDEO_SAA7110 is not set +CONFIG_VIDEO_SAA711X=m +# CONFIG_VIDEO_TVP514X is not set +CONFIG_VIDEO_TVP5150=m +# CONFIG_VIDEO_TVP7002 is not set +# CONFIG_VIDEO_TW2804 is not set +# CONFIG_VIDEO_TW9903 is not set +# CONFIG_VIDEO_TW9906 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +CONFIG_VIDEO_SAA717X=m +CONFIG_VIDEO_CX25840=m + +# +# Video encoders +# +CONFIG_VIDEO_SAA7127=m +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV7343 is not set +# CONFIG_VIDEO_ADV7393 is not set +# CONFIG_VIDEO_ADV7511 is not set +# CONFIG_VIDEO_AD9389B is not set +# CONFIG_VIDEO_AK881X is not set +# CONFIG_VIDEO_THS8200 is not set + +# +# Camera sensor devices +# +CONFIG_VIDEO_OV2659=m +# CONFIG_VIDEO_OV7640 is not set +CONFIG_VIDEO_OV7670=m +# CONFIG_VIDEO_OV9650 is not set +CONFIG_VIDEO_OV1063X=m +# CONFIG_VIDEO_VS6624 is not set +# CONFIG_VIDEO_MT9M032 is not set +# CONFIG_VIDEO_MT9P031 is not set +# CONFIG_VIDEO_MT9T001 is not set +CONFIG_VIDEO_MT9V011=m +# CONFIG_VIDEO_MT9V032 is not set +CONFIG_VIDEO_MT9T11X=m +# CONFIG_VIDEO_SR030PC30 is not set +# CONFIG_VIDEO_NOON010PC30 is not set +# CONFIG_VIDEO_M5MOLS is not set +# CONFIG_VIDEO_S5K6AA is not set +# CONFIG_VIDEO_S5K6A3 is not set +# CONFIG_VIDEO_S5K4ECGX is not set +# CONFIG_VIDEO_S5K5BAF is not set +# CONFIG_VIDEO_SMIAPP is not set +# CONFIG_VIDEO_S5C73M3 is not set + +# +# Flash devices +# +# CONFIG_VIDEO_ADP1653 is not set +# CONFIG_VIDEO_AS3645A is not set +# CONFIG_VIDEO_LM3560 is not set +# CONFIG_VIDEO_LM3646 is not set + +# +# Video improvement chips +# +CONFIG_VIDEO_UPD64031A=m +CONFIG_VIDEO_UPD64083=m + +# +# Audio/Video compression chips +# +CONFIG_VIDEO_SAA6752HS=m + +# +# Miscellaneous helper chips +# +# CONFIG_VIDEO_THS7303 is not set +CONFIG_VIDEO_M52790=m + +# +# Sensors used on soc_camera driver +# + +# +# soc_camera sensor drivers +# +# CONFIG_SOC_CAMERA_IMX074 is not set +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_OV2640 is not set +# CONFIG_SOC_CAMERA_OV5642 is not set +# CONFIG_SOC_CAMERA_OV6650 is not set +# CONFIG_SOC_CAMERA_OV772X is not set +# CONFIG_SOC_CAMERA_OV9640 is not set +# CONFIG_SOC_CAMERA_OV9740 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +CONFIG_MEDIA_TUNER=m + +# +# Customize TV tuners +# +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MSI001=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m +CONFIG_MEDIA_TUNER_MXL301RF=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m + +# +# Customise DVB Frontends +# + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_S5H1432=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_DIB9000=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_HD29L2=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_RTL2832_SDR=m +CONFIG_DVB_SI2168=m +# CONFIG_DVB_AS102_FE is not set + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# +CONFIG_DVB_TC90522=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_SP2=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 + +# +# Direct Rendering Manager +# +CONFIG_DRM=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y + +# +# I2C encoder or helper chips +# +# CONFIG_DRM_I2C_ADV7511 is not set +# CONFIG_DRM_I2C_CH7006 is not set +# CONFIG_DRM_I2C_SIL164 is not set +CONFIG_DRM_I2C_NXP_TDA998X=y +# CONFIG_DRM_PTN3460 is not set +# CONFIG_DRM_PS8622 is not set +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_VMWGFX is not set +CONFIG_DRM_UDL=y +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +# CONFIG_DRM_ARMADA is not set +CONFIG_DRM_OMAP=y +CONFIG_DRM_OMAP_NUM_CRTCS=2 +CONFIG_DRM_TILCDC=m +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +# CONFIG_DRM_STI is not set + +# +# Frame buffer Devices +# +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_CMDLINE=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SMSCUFX=m +CONFIG_FB_UDL=m +# CONFIG_FB_DA8XX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +CONFIG_FB_SIMPLE=y +CONFIG_OMAP2_DSS_INIT=y +CONFIG_OMAP2_DSS=y +# CONFIG_OMAP2_DSS_DEBUG is not set +# CONFIG_OMAP2_DSS_DEBUGFS is not set +CONFIG_OMAP2_DSS_DPI=y +CONFIG_OMAP2_DSS_VENC=y +CONFIG_OMAP2_DSS_HDMI_COMMON=y +CONFIG_OMAP4_DSS_HDMI=y +CONFIG_OMAP5_DSS_HDMI=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y + +# +# OMAP Display Device Drivers (new device model) +# +CONFIG_DISPLAY_ENCODER_OPA362=y +# CONFIG_DISPLAY_ENCODER_TFP410 is not set +CONFIG_DISPLAY_ENCODER_TPD12S015=y +CONFIG_DISPLAY_DRA7EVM_ENCODER_TPD12S015=m +CONFIG_DISPLAY_ENCODER_SII9022=y +CONFIG_DISPLAY_ENCODER_SII9022_AUDIO_CODEC=y +CONFIG_DISPLAY_CONNECTOR_DVI=y +CONFIG_DISPLAY_CONNECTOR_HDMI=y +# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set +CONFIG_DISPLAY_PANEL_DPI=y +# CONFIG_DISPLAY_PANEL_DSI_CM is not set +CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m +# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set +# CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set +# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set +CONFIG_DISPLAY_PANEL_TLC59108=y +CONFIG_FB_SSD1307=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +# CONFIG_BACKLIGHT_DA9052 is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +# CONFIG_BACKLIGHT_LP855X is not set +# CONFIG_BACKLIGHT_PANDORA is not set +# CONFIG_BACKLIGHT_TPS65217 is not set +CONFIG_BACKLIGHT_GPIO=y +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_COMPRESS_OFFLOAD=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_MAX_CARDS=32 +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +CONFIG_SND_ALOOP=m +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +CONFIG_SND_MTS64=m +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PORTMAN2X4=m +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SE6X is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +# CONFIG_SND_HDA_INTEL is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m +CONFIG_SND_USB_LINE6=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m +CONFIG_SND_SOC=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +# CONFIG_SND_ATMEL_SOC is not set +CONFIG_SND_EDMA_SOC=m +CONFIG_SND_DAVINCI_SOC_MCASP=m +CONFIG_SND_DAVINCI_SOC_GENERIC_EVM=m +CONFIG_SND_AM33XX_SOC_EVM=m +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +CONFIG_SND_SOC_FSL_SSI=m +CONFIG_SND_SOC_FSL_SPDIF=m +# CONFIG_SND_SOC_FSL_ESAI is not set +CONFIG_SND_SOC_IMX_AUDMUX=m +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_DMIC=m +CONFIG_SND_OMAP_SOC_MCBSP=m +CONFIG_SND_OMAP_SOC_MCPDM=m +CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m +CONFIG_SND_OMAP_SOC_RX51=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +CONFIG_SND_SOC_I2C_AND_SPI=y + +# +# CODEC drivers +# +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +CONFIG_SND_SOC_DMIC=m +CONFIG_SND_SOC_HDMI_CODEC=m +# CONFIG_SND_SOC_ES8328 is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1792A is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_RT5677_SPI is not set +CONFIG_SND_SOC_SGTL5000=m +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TFA9879 is not set +CONFIG_SND_SOC_TLV320AIC23=m +CONFIG_SND_SOC_TLV320AIC23_I2C=m +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +CONFIG_SND_SOC_TLV320AIC31XX=m +CONFIG_SND_SOC_TLV320AIC3X=m +# CONFIG_SND_SOC_TS3A227E is not set +CONFIG_SND_SOC_TWL4030=m +CONFIG_SND_SOC_TWL6040=m +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8978 is not set +CONFIG_SND_SOC_TPA6130A2=m +CONFIG_SND_SIMPLE_CARD=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID support +# +CONFIG_HID=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HIDRAW=y +CONFIG_UHID=y +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_ACRUX=m +CONFIG_HID_ACRUX_FF=y +CONFIG_HID_APPLE=y +CONFIG_HID_APPLEIR=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=y +CONFIG_HID_BETOP_FF=m +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CP2112=m +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=y +CONFIG_HID_HOLTEK=m +CONFIG_HOLTEK_FF=y +CONFIG_HID_GT683R=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LCPOWER=m +CONFIG_HID_LENOVO=m +CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH_DJ=y +CONFIG_HID_LOGITECH_HIDPP=y +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_LOGIG940_FF=y +CONFIG_LOGIWHEELS_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTRIG=m +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PENMOUNT=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PICOLCD_CIR=y +CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PRIMAX=m +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_HUB=m +CONFIG_HID_SENSOR_CUSTOM_SENSOR=m + +# +# USB HID support +# +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# I2C HID support +# +# CONFIG_I2C_HID is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +CONFIG_USB_MON=y +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_XHCI_PLATFORM=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_HCD_OMAP=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_FUSBH200_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USB_U132_HCD=m +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +CONFIG_USB_HWA_HCD=m +# CONFIG_USB_HCD_BCMA is not set +# CONFIG_USB_HCD_SSB is not set +# CONFIG_USB_HCD_TEST_MODE is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USBIP_CORE=m +CONFIG_USBIP_VHCI_HCD=m +CONFIG_USBIP_HOST=m +# CONFIG_USBIP_DEBUG is not set +CONFIG_USB_MUSB_HDRC=y +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_GADGET is not set +CONFIG_USB_MUSB_DUAL_ROLE=y + +# +# Platform Glue Layer +# +# CONFIG_USB_MUSB_TUSB6010 is not set +# CONFIG_USB_MUSB_OMAP2PLUS is not set +# CONFIG_USB_MUSB_AM35X is not set +CONFIG_USB_MUSB_DSPS=y +CONFIG_USB_MUSB_AM335X_CHILD=y +# CONFIG_USB_TI_CPPI41_DMA is not set +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y + +# +# Platform Glue Driver Support +# +CONFIG_USB_DWC3_OMAP=y +CONFIG_USB_DWC3_PCI=y + +# +# Debugging features +# +# CONFIG_USB_DWC3_DEBUG is not set +# CONFIG_USB_DWC2 is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_OF=y +CONFIG_USB_CHIPIDEA_PCI=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +# CONFIG_USB_CHIPIDEA_DEBUG is not set +# CONFIG_USB_ISP1760 is not set + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_F81232=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_METRO=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7715_PARPORT=y +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MXUPORT=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +CONFIG_USB_SERIAL_WISHBONE=m +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m +CONFIG_USB_EZUSB_FX2=m +CONFIG_USB_HSIC_USB3503=m +# CONFIG_USB_LINK_LAYER_TEST is not set +CONFIG_USB_CHAOSKEY=m +# CONFIG_USB_ATM is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_AM335X_CONTROL_USB=y +CONFIG_AM335X_PHY_USB=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_ULPI=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FUSB300 is not set +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_BDC_UDC is not set +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_DUMMY_HCD is not set +CONFIG_USB_LIBCOMPOSITE=y +CONFIG_USB_U_ETHER=y +CONFIG_USB_F_ECM=y +CONFIG_USB_F_SUBSET=y +CONFIG_USB_F_RNDIS=y +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_GADGET_TARGET is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set +CONFIG_USB_LED_TRIG=y +CONFIG_UWB=m +CONFIG_UWB_HWA=m +# CONFIG_UWB_WHCI is not set +CONFIG_UWB_I1480U=m +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_CLKGATE is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_F_SDH30 is not set +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set +CONFIG_MMC_DW=m +# CONFIG_MMC_DW_IDMAC is not set +CONFIG_MMC_DW_PLTFM=m +CONFIG_MMC_DW_EXYNOS=m +# CONFIG_MMC_DW_K3 is not set +# CONFIG_MMC_DW_PCI is not set +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_REALTEK_USB=m +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set + +# +# LED drivers +# +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_LP55XX_COMMON=m +# CONFIG_LEDS_LP5521 is not set +CONFIG_LEDS_LP5523=m +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +CONFIG_LEDS_PCA955X=m +# CONFIG_LEDS_PCA963X is not set +CONFIG_LEDS_DA9052=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_REGULATOR=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_LT3593=m +CONFIG_LEDS_MC13783=m +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_LM355x is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set +# CONFIG_LEDS_SYSCON is not set +# CONFIG_LEDS_PM8941_WLED is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +CONFIG_ACCESSIBILITY=y +CONFIG_A11Y_BRAILLE_CONSOLE=y +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1374_WDT=y +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_HYM8563=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_ISL12057=y +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PALMAS=y +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_PCF8523=y +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF85063=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_TPS65910=m +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_S5M=y + +# +# SPI RTC drivers +# +CONFIG_RTC_DRV_M41T93=m +CONFIG_RTC_DRV_M41T94=m +CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1343=m +CONFIG_RTC_DRV_DS1347=m +CONFIG_RTC_DRV_DS1390=m +CONFIG_RTC_DRV_MAX6902=m +CONFIG_RTC_DRV_R9701=m +CONFIG_RTC_DRV_RS5C348=m +CONFIG_RTC_DRV_DS3234=m +CONFIG_RTC_DRV_PCF2123=m +CONFIG_RTC_DRV_RX4581=m +CONFIG_RTC_DRV_MCP795=m + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=m +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1685_FAMILY=m +CONFIG_RTC_DRV_DS1685=y +# CONFIG_RTC_DRV_DS1689 is not set +# CONFIG_RTC_DRV_DS17285 is not set +# CONFIG_RTC_DRV_DS17485 is not set +# CONFIG_RTC_DRV_DS17885 is not set +# CONFIG_RTC_DS1685_PROC_REGS is not set +# CONFIG_RTC_DS1685_SYSFS_REGS is not set +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_DA9052=y +CONFIG_RTC_DRV_STK17TA8=m +CONFIG_RTC_DRV_M48T86=m +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y +CONFIG_RTC_DRV_MC13XXX=m +CONFIG_RTC_DRV_SNVS=y +# CONFIG_RTC_DRV_XGENE is not set + +# +# HID Sensor RTC drivers +# +CONFIG_RTC_DRV_HID_SENSOR_TIME=m +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DW_DMAC_CORE=y +CONFIG_DW_DMAC=y +# CONFIG_DW_DMAC_PCI is not set +# CONFIG_HSU_DMA_PCI is not set +CONFIG_TI_EDMA=y +CONFIG_TI_DMA_CROSSBAR=y +CONFIG_DMA_OMAP=y +CONFIG_TI_CPPI41=y +# CONFIG_FSL_EDMA is not set +# CONFIG_NBPFAXI_DMA is not set +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_OF=y + +# +# DMA Clients +# +CONFIG_ASYNC_TX_DMA=y +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +# CONFIG_UIO_CIF is not set +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_DMEM_GENIRQ=m +# CONFIG_UIO_AEC is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_UIO_PCI_GENERIC is not set +# CONFIG_UIO_NETX is not set +CONFIG_UIO_PRUSS=m +# CONFIG_UIO_MF624 is not set +# CONFIG_VFIO is not set +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO=y + +# +# Virtio drivers +# +# CONFIG_VIRTIO_PCI is not set +CONFIG_VIRTIO_BALLOON=m +# CONFIG_VIRTIO_INPUT is not set +CONFIG_VIRTIO_MMIO=m +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_STAGING=y +# CONFIG_PRISM2_USB is not set +# CONFIG_COMEDI is not set +# CONFIG_PANEL is not set +# CONFIG_RTL8192U is not set +# CONFIG_RTLLIB is not set +CONFIG_R8712U=m +CONFIG_R8188EU=m +CONFIG_88EU_AP_MODE=y +# CONFIG_R8723AU is not set +# CONFIG_RTS5208 is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set + +# +# IIO staging drivers +# + +# +# Accelerometers +# +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16203 is not set +# CONFIG_ADIS16204 is not set +# CONFIG_ADIS16209 is not set +# CONFIG_ADIS16220 is not set +# CONFIG_ADIS16240 is not set +CONFIG_LIS3L02DQ=m +# CONFIG_SCA3000 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7606 is not set +# CONFIG_AD7780 is not set +# CONFIG_AD7816 is not set +# CONFIG_AD7192 is not set +# CONFIG_AD7280 is not set + +# +# Analog digital bi-direction converters +# +# CONFIG_ADT7316 is not set + +# +# Capacitance to digital converters +# +# CONFIG_AD7150 is not set +# CONFIG_AD7152 is not set +# CONFIG_AD7746 is not set + +# +# Direct Digital Synthesis +# +# CONFIG_AD9832 is not set +# CONFIG_AD9834 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16060 is not set + +# +# Network Analyzer, Impedance Converters +# +# CONFIG_AD5933 is not set + +# +# Light sensors +# +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_SENSORS_ISL29028 is not set +# CONFIG_TSL2583 is not set +# CONFIG_TSL2x7x is not set + +# +# Magnetometer sensors +# +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set + +# +# Active energy metering IC +# +# CONFIG_ADE7753 is not set +# CONFIG_ADE7754 is not set +# CONFIG_ADE7758 is not set +# CONFIG_ADE7759 is not set +# CONFIG_ADE7854 is not set + +# +# Resolver to digital converters +# +# CONFIG_AD2S90 is not set +# CONFIG_AD2S1200 is not set +# CONFIG_AD2S1210 is not set + +# +# Triggers - standalone +# +# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set +# CONFIG_IIO_SIMPLE_DUMMY is not set +# CONFIG_FB_SM7XX is not set +# CONFIG_FB_SM750 is not set +# CONFIG_FB_XGI is not set +# CONFIG_FT1000 is not set + +# +# Speakup console speech +# +CONFIG_SPEAKUP=m +CONFIG_SPEAKUP_SYNTH_ACNTSA=m +CONFIG_SPEAKUP_SYNTH_APOLLO=m +CONFIG_SPEAKUP_SYNTH_AUDPTR=m +CONFIG_SPEAKUP_SYNTH_BNS=m +CONFIG_SPEAKUP_SYNTH_DECTLK=m +CONFIG_SPEAKUP_SYNTH_DECEXT=m +CONFIG_SPEAKUP_SYNTH_LTLK=m +CONFIG_SPEAKUP_SYNTH_SOFT=m +CONFIG_SPEAKUP_SYNTH_SPKOUT=m +CONFIG_SPEAKUP_SYNTH_TXPRT=m +CONFIG_SPEAKUP_SYNTH_DUMMY=m +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +# CONFIG_STAGING_MEDIA is not set + +# +# Android +# +CONFIG_ASHMEM=y +CONFIG_ANDROID_TIMED_OUTPUT=y +CONFIG_ANDROID_TIMED_GPIO=m +# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set +CONFIG_SYNC=y +# CONFIG_SW_SYNC is not set +CONFIG_ION=y +# CONFIG_ION_TEST is not set +# CONFIG_ION_DUMMY is not set +# CONFIG_USB_WPAN_HCD is not set +# CONFIG_WIMAX_GDM72XX is not set +# CONFIG_LTE_GDM724X is not set +# CONFIG_MTD_SPINAND_MT29F is not set +# CONFIG_LUSTRE_FS is not set +# CONFIG_DGNC is not set +# CONFIG_DGAP is not set +# CONFIG_GS_FPGABOOT is not set +# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set +# CONFIG_FB_TFT is not set +# CONFIG_I2O is not set +# CONFIG_CHROME_PLATFORMS is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI570 is not set +CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_CLK_TWL6040=m +# CONFIG_CLK_QORIQ is not set +CONFIG_COMMON_CLK_PALMAS=y +# CONFIG_COMMON_CLK_PWM is not set +# CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +CONFIG_HWSPINLOCK=y + +# +# Hardware Spinlock drivers +# +CONFIG_HWSPINLOCK_OMAP=y + +# +# Clock Source drivers +# +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_MMIO=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +# CONFIG_ATMEL_PIT is not set +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_MAILBOX=y +CONFIG_OMAP2PLUS_MBOX=y +CONFIG_OMAP_MBOX_KFIFO_SIZE=256 +# CONFIG_ALTERA_MBOX is not set +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set +CONFIG_OF_IOMMU=y +CONFIG_OMAP_IOMMU=y +# CONFIG_OMAP_IOMMU_DEBUG is not set +# CONFIG_ARM_SMMU is not set + +# +# Remoteproc drivers +# +CONFIG_REMOTEPROC=y +CONFIG_OMAP_REMOTEPROC=y +# CONFIG_STE_MODEM_RPROC is not set +CONFIG_WKUP_M3_RPROC=y + +# +# Rpmsg drivers +# +CONFIG_RPMSG=y + +# +# SOC (System On Chip) specific Drivers +# +CONFIG_SOC_TI=y +CONFIG_WKUP_M3_IPC=y +CONFIG_PM_DEVFREQ=y + +# +# DEVFREQ Governors +# +CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y +CONFIG_DEVFREQ_GOV_PERFORMANCE=y +CONFIG_DEVFREQ_GOV_POWERSAVE=y +CONFIG_DEVFREQ_GOV_USERSPACE=y + +# +# DEVFREQ Drivers +# +# CONFIG_PM_DEVFREQ_EVENT is not set +CONFIG_EXTCON=y + +# +# Extcon Device Drivers +# +# CONFIG_EXTCON_ADC_JACK is not set +CONFIG_EXTCON_GPIO=y +CONFIG_EXTCON_PALMAS=y +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +CONFIG_EXTCON_USB_GPIO=y +CONFIG_MEMORY=y +CONFIG_TI_EMIF=y +CONFIG_OMAP_GPMC=y +CONFIG_TI_EMIF_SRAM=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +# CONFIG_IIO_BUFFER_CB is not set +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGERED_BUFFER=m +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 + +# +# Accelerometers +# +# CONFIG_BMA180 is not set +# CONFIG_BMC150_ACCEL is not set +CONFIG_HID_SENSOR_ACCEL_3D=m +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_MMA8452 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD799X is not set +# CONFIG_AXP288_ADC is not set +# CONFIG_CC10001_ADC is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_NAU7802 is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC128S052 is not set +CONFIG_TI_AM335X_ADC=m +CONFIG_TWL4030_MADC=m +# CONFIG_TWL6030_GPADC is not set +# CONFIG_VF610_ADC is not set +CONFIG_VIPERBOARD_ADC=m + +# +# Amplifiers +# +# CONFIG_AD8366 is not set + +# +# Hid Sensor IIO Common +# +CONFIG_HID_SENSOR_IIO_COMMON=m +CONFIG_HID_SENSOR_IIO_TRIGGER=m + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_AD5686 is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_MAX517 is not set +# CONFIG_MAX5821 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +CONFIG_HID_SENSOR_GYRO_3D=m +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set + +# +# Humidity sensors +# +# CONFIG_DHT11 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_IIO is not set + +# +# Light sensors +# +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM36651 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_ISL29125 is not set +CONFIG_HID_SENSOR_ALS=m +CONFIG_HID_SENSOR_PROX=m +# CONFIG_JSA1212 is not set +# CONFIG_LTR501 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +CONFIG_SENSORS_TSL2563=m +# CONFIG_TSL4531 is not set +# CONFIG_VCNL4000 is not set + +# +# Magnetometer sensors +# +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_MAG3110 is not set +CONFIG_HID_SENSOR_MAGNETOMETER_3D=m +# CONFIG_IIO_ST_MAGN_3AXIS is not set + +# +# Inclinometer sensors +# +CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m + +# +# Triggers - standalone +# +CONFIG_IIO_INTERRUPT_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m + +# +# Pressure sensors +# +# CONFIG_BMP280 is not set +CONFIG_HID_SENSOR_PRESS=m +# CONFIG_MPL115 is not set +# CONFIG_MPL3115 is not set +# CONFIG_MS5611 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set + +# +# Proximity sensors +# +# CONFIG_SX9500 is not set + +# +# Temperature sensors +# +# CONFIG_MLX90614 is not set +# CONFIG_TMP006 is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_FSL_FTM is not set +# CONFIG_PWM_PCA9685 is not set +CONFIG_PWM_TIECAP=m +CONFIG_PWM_TIEHRPWM=m +CONFIG_PWM_TIPWMSS=y +CONFIG_PWM_TWL=m +CONFIG_PWM_TWL_LED=m +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_OMAP_IRQCHIP=y +CONFIG_IRQ_CROSSBAR=y +# CONFIG_IPACK_BUS is not set +# CONFIG_RESET_CONTROLLER is not set +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +# CONFIG_PHY_DM816X_USB is not set +CONFIG_OMAP_CONTROL_PHY=y +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set +# CONFIG_THUNDERBOLT is not set + +# +# Android +# +CONFIG_ANDROID=y +CONFIG_ANDROID_BINDER_IPC=y +CONFIG_ANDROID_BINDER_IPC_32BIT=y +CONFIG_NVMEM=y + +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_USE_FOR_EXT23=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ENCRYPTION=y +CONFIG_EXT4_FS_ENCRYPTION=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_XFS_FS=y +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +# CONFIG_XFS_WARN is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_BTRFS_FS=y +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_ASSERT is not set +CONFIG_NILFS2_FS=m +CONFIG_F2FS_FS=y +CONFIG_F2FS_STAT_FS=y +CONFIG_F2FS_FS_XATTR=y +CONFIG_F2FS_FS_POSIX_ACL=y +CONFIG_F2FS_FS_SECURITY=y +# CONFIG_F2FS_CHECK_FS is not set +# CONFIG_F2FS_IO_TRACE is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=m +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=y + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_HFSPLUS_FS_POSIX_ACL is not set +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_UBIFS_FS=m +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_LOGFS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZ4=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +# CONFIG_HPFS_FS is not set +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m +# CONFIG_QNX6FS_DEBUG is not set +CONFIG_ROMFS_FS=m +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +# CONFIG_ROMFS_BACKED_BY_MTD is not set +CONFIG_ROMFS_BACKED_BY_BOTH=y +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_ROMFS_ON_MTD=y +# CONFIG_PSTORE is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_EXOFS_FS=m +# CONFIG_EXOFS_DEBUG is not set +CONFIG_ORE=m +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_OBJLAYOUT=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_DEBUG=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +# CONFIG_NFSD_PNFS is not set +CONFIG_NFSD_V4_SECURITY_LABEL=y +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_SUNRPC_SWAP=y +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC_DEBUG=y +CONFIG_CEPH_FS=m +CONFIG_CEPH_FSCACHE=y +CONFIG_CEPH_FS_POSIX_ACL=y +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DEBUG=y +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_SMB2=y +CONFIG_CIFS_FSCACHE=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +# CONFIG_NCPFS_SMALLDOS is not set +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +# CONFIG_AFS_DEBUG is not set +CONFIG_AFS_FSCACHE=y +CONFIG_9P_FS=m +CONFIG_9P_FSCACHE=y +CONFIG_9P_FS_POSIX_ACL=y +CONFIG_9P_FS_SECURITY=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +CONFIG_DYNAMIC_DEBUG=y + +# +# Compile-time checks and compiler options +# +# CONFIG_DEBUG_INFO is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_READABLE_ASM is not set +CONFIG_UNUSED_SYMBOLS=y +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_SCHED_STACK_END_CHECK=y +# CONFIG_DEBUG_TIMEKEEPING is not set +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_PREEMPT=y + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_PROVE_RCU is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_CPU_STALL_INFO is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KPROBE_EVENT=y +CONFIG_UPROBE_EVENT=y +CONFIG_BPF_EVENTS=y +CONFIG_PROBE_EVENTS=y +CONFIG_DYNAMIC_FTRACE=y +# CONFIG_FUNCTION_PROFILER is not set +CONFIG_FTRACE_MCOUNT_RECORD=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_TRACEPOINT_BENCHMARK is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_RING_BUFFER_STARTUP_TEST is not set +# CONFIG_TRACE_ENUM_MAP_FILE is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_ASYNC_RAID6_TEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_MEMTEST is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_KGDB=y +CONFIG_KGDB_SERIAL_CONSOLE=y +# CONFIG_KGDB_TESTS is not set +CONFIG_KGDB_KDB=y +CONFIG_KDB_DEFAULT_ENABLE=0x1 +CONFIG_KDB_KEYBOARD=y +CONFIG_KDB_CONTINUE_CATASTROPHIC=0 +# CONFIG_ARM_PTDUMP is not set +# CONFIG_STRICT_DEVMEM is not set +CONFIG_ARM_UNWIND=y +CONFIG_OLD_MCOUNT=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_LL is not set +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_UART_BCM63XX is not set +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +# CONFIG_ARM_KPROBES_TEST is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_DEBUG_SET_MODULE_RONX is not set +# CONFIG_CORESIGHT is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_TRUSTED_KEYS is not set +CONFIG_ENCRYPTED_KEYS=y +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_SECURITY_PATH=y +CONFIG_LSM_MMAP_MIN_ADDR=32768 +CONFIG_SECURITY_SELINUX=y +# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set +# CONFIG_SECURITY_SELINUX_DISABLE is not set +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_SECURITY_TOMOYO=y +CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 +CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 +# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set +CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" +CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" +CONFIG_SECURITY_APPARMOR=y +CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_APPARMOR_HASH=y +CONFIG_SECURITY_YAMA=y +CONFIG_SECURITY_YAMA_STACKED=y +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +# CONFIG_EVM is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_APPARMOR is not set +# CONFIG_DEFAULT_SECURITY_YAMA is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_MCRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ABLK_HELPER=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=y + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST_COMMON=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +# CONFIG_CRYPTO_DRBG_MENU is not set +CONFIG_CRYPTO_USER_API=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +# CONFIG_CRYPTO_USER_API_RNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_CRYPTO_DEV_OMAP_SHAM=y +CONFIG_CRYPTO_DEV_OMAP_AES=y +CONFIG_CRYPTO_DEV_OMAP_DES=y +# CONFIG_ASYMMETRIC_KEY_TYPE is not set +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM=m +CONFIG_CRYPTO_SHA1_ARM_NEON=m +# CONFIG_CRYPTO_SHA1_ARM_CE is not set +# CONFIG_CRYPTO_SHA2_ARM_CE is not set +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM_NEON=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +# CONFIG_CRYPTO_AES_ARM_CE is not set +# CONFIG_CRYPTO_GHASH_ARM_CE is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=y +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_PERCPU_RWSEM=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=y +# CONFIG_CRC8 is not set +CONFIG_AUDIT_GENERIC=y +# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_COMPRESS=m +CONFIG_LZ4HC_COMPRESS=m +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +# CONFIG_XZ_DEC_X86 is not set +# CONFIG_XZ_DEC_POWERPC is not set +# CONFIG_XZ_DEC_IA64 is not set +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +# CONFIG_XZ_DEC_SPARC is not set +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_BCH=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_LRU_CACHE=m +CONFIG_AVERAGE=y +CONFIG_CORDIC=m +CONFIG_DDR=y +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_VIRTUALIZATION=y diff --git a/arch/arm/configs/mhb_defconfig b/arch/arm/configs/mhb_defconfig new file mode 100644 index 0000000000000..2258211d2f330 --- /dev/null +++ b/arch/arm/configs/mhb_defconfig @@ -0,0 +1,6363 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm 4.1.3 Kernel Configuration +# +CONFIG_ARM=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_BANDGAP=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_GENERIC_BUG=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="arm-linux-gnueabihf-" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="myhomebox4" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_LZ4=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_XZ is not set +CONFIG_KERNEL_LZO=y +# CONFIG_KERNEL_LZ4 is not set +CONFIG_DEFAULT_HOSTNAME="myhomebox" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_FHANDLE=y +CONFIG_USELIB=y +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_HANDLE_DOMAIN_IRQ=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y + +# +# RCU Subsystem +# +CONFIG_PREEMPT_RCU=y +CONFIG_SRCU=y +# CONFIG_TASKS_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_RCU_USER_QS is not set +CONFIG_RCU_FANOUT=32 +CONFIG_RCU_FANOUT_LEAF=16 +# CONFIG_RCU_FANOUT_EXACT is not set +CONFIG_RCU_FAST_NO_HZ=y +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_BOOST is not set +CONFIG_RCU_KTHREAD_PRIO=0 +# CONFIG_RCU_NOCB_CPU is not set +# CONFIG_RCU_EXPEDITE_BOOT is not set +CONFIG_BUILD_BIN2C=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +# CONFIG_MEMCG_SWAP_ENABLED is not set +# CONFIG_MEMCG_KMEM is not set +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CHECKPOINT_RESTORE=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_BPF=y +CONFIG_EXPERT=y +CONFIG_UID16=y +CONFIG_MULTIUSER=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_BPF_SYSCALL=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +CONFIG_PCI_QUIRKS=y +CONFIG_EMBEDDED=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_SYSTEM_TRUSTED_KEYRING is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_UPROBES=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR_NONE is not set +CONFIG_CC_STACKPROTECTOR_REGULAR=y +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OLD_SIGACTION=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_AIX_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_CMDLINE_PARTITION is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PADATA=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_LPC32XX is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_SHMOBILE_LEGACY is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C24XX is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP1 is not set + +# +# Multiple platform selection +# + +# +# CPU Core family selection +# +# CONFIG_ARCH_MULTI_V6 is not set +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_MULTI_V6_V7=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +# CONFIG_ARCH_VIRT is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCM is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_DIGICOLOR is not set +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_KEYSTONE is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_MEDIATEK is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Common Features +# + +# +# OMAP Feature Selections +# +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_PM_NOOP=y +CONFIG_MACH_OMAP_GENERIC=y + +# +# TI OMAP/AM/DM/DRA Family +# +# CONFIG_ARCH_OMAP3 is not set +# CONFIG_ARCH_OMAP4 is not set +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y +CONFIG_ARCH_OMAP2PLUS=y +CONFIG_OMAP_INTERCONNECT_BARRIER=y + +# +# TI OMAP2/3/4 Specific Features +# +CONFIG_ARCH_OMAP2PLUS_TYPICAL=y +CONFIG_SOC_HAS_OMAP2_SDRC=y +CONFIG_SOC_HAS_REALTIME_COUNTER=y + +# +# OMAP Legacy Platform Data Board Type +# +CONFIG_AMX3_PM=y +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_SOCFPGA is not set +# CONFIG_PLAT_SPEAR is not set +# CONFIG_ARCH_STI is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_SHMOBILE_MULTI is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_SIRF is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_WM8850 is not set +# CONFIG_ARCH_ZYNQ is not set + +# +# Processor Type +# +CONFIG_CPU_V7=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_LPAE is not set +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_SWP_EMULATE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_KUSER_HELPERS=y +CONFIG_VDSO=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_CACHE_L2X0=y +CONFIG_PL310_ERRATA_588369=y +CONFIG_PL310_ERRATA_727915=y +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +CONFIG_ARM_HEAVY_MB=y +# CONFIG_ARM_KERNMEM_PERMS is not set +CONFIG_MULTI_IRQ_HANDLER=y +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_643719 is not set +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_754322=y +# CONFIG_ARM_ERRATA_754327 is not set +# CONFIG_ARM_ERRATA_764369 is not set +CONFIG_ARM_ERRATA_775420=y +CONFIG_ARM_ERRATA_798181=y +# CONFIG_ARM_ERRATA_773022 is not set +CONFIG_TI_PRIV_EDMA=y + +# +# Bus support +# +CONFIG_PCI=y +# CONFIG_PCI_DOMAINS_GENERIC is not set +CONFIG_PCI_SYSCALL=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set + +# +# PCI host controller drivers +# +CONFIG_PCI_DRA7XX=y +CONFIG_PCIE_DW=y +# CONFIG_PCI_HOST_GENERIC is not set +# CONFIG_PCI_LAYERSCAPE is not set +# CONFIG_PCIE_IPROC is not set +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_HAVE_SMP=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_ARM_CPU_TOPOLOGY=y +# CONFIG_SCHED_MC is not set +# CONFIG_SCHED_SMT is not set +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_HAVE_ARM_TWD=y +# CONFIG_MCPM is not set +# CONFIG_BIG_LITTLE is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y +CONFIG_ARM_PSCI=y +CONFIG_ARCH_NR_GPIO=512 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +CONFIG_HZ_FIXED=0 +CONFIG_HZ_100=y +# CONFIG_HZ_200 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_500 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HW_PERF_EVENTS=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_CLEANCACHE is not set +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +CONFIG_ZSWAP=y +CONFIG_ZPOOL=y +CONFIG_ZBUD=m +CONFIG_ZSMALLOC=m +# CONFIG_PGTABLE_MAPPING is not set +# CONFIG_ZSMALLOC_STAT is not set +CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set +CONFIG_SECCOMP=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +# CONFIG_XEN is not set + +# +# Boot options +# +CONFIG_USE_OF=y +CONFIG_ATAGS=y +# CONFIG_DEPRECATED_PARAM_STRUCT is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_ARM_APPENDED_DTB is not set +CONFIG_CMDLINE="" +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y +# CONFIG_CRASH_DUMP is not set +CONFIG_AUTO_ZRELADDR=y + +# +# CPU Power Management +# + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y + +# +# CPU frequency scaling drivers +# +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_VOLTDM=y +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set +# CONFIG_QORIQ_CPUFREQ is not set + +# +# CPU Idle +# +# CONFIG_CPU_IDLE is not set +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_COREDUMP=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_AUTOSLEEP=y +CONFIG_PM_WAKELOCKS=y +CONFIG_PM_WAKELOCKS_LIMIT=100 +CONFIG_PM_WAKELOCKS_GC=y +CONFIG_PM=y +CONFIG_PM_DEBUG=y +CONFIG_PM_ADVANCED_DEBUG=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_SLEEP_DEBUG=y +CONFIG_APM_EMULATION=y +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_CPU_PM=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM=y +CONFIG_XFRM_ALGO=m +CONFIG_XFRM_USER=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_NET_UDP_TUNNEL=m +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +CONFIG_GENEVE=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=y +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_ACCT=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CONNTRACK_LABELS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_QUEUE_CT=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_SIP=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_REDIRECT=m +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_INET=m +CONFIG_NFT_EXTHDR=m +CONFIG_NFT_META=m +CONFIG_NFT_CT=m +CONFIG_NFT_RBTREE=m +CONFIG_NFT_HASH=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +# CONFIG_NFT_REDIR is not set +CONFIG_NFT_NAT=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m +CONFIG_NFT_COMPAT=m +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_NAT=m +CONFIG_NETFILTER_XT_TARGET_NETMAP=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPCOMP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_L2TP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_FO=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS SH scheduler +# +CONFIG_IP_VS_SH_TAB_BITS=8 + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_NF_TABLES_IPV4=m +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_REJECT_IPV4=m +CONFIG_NF_TABLES_ARP=m +CONFIG_NF_LOG_ARP=m +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_NF_TABLES_IPV6=m +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_REJECT_IPV6=m +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_NET_DCCPPROBE=m +CONFIG_IP_SCTP=m +CONFIG_NET_SCTPPROBE=m +# CONFIG_SCTP_DBG_OBJCNT is not set +CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set +CONFIG_SCTP_COOKIE_HMAC_MD5=y +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set +CONFIG_TIPC=m +CONFIG_TIPC_MEDIA_UDP=y +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +CONFIG_LLC2=m +# CONFIG_IPX is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +CONFIG_PHONET=m +CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_NHC=m +CONFIG_6LOWPAN_NHC_DEST=m +CONFIG_6LOWPAN_NHC_FRAGMENT=m +CONFIG_6LOWPAN_NHC_HOP=m +CONFIG_6LOWPAN_NHC_IPV6=m +CONFIG_6LOWPAN_NHC_MOBILITY=m +CONFIG_6LOWPAN_NHC_ROUTING=m +CONFIG_6LOWPAN_NHC_UDP=m +CONFIG_IEEE802154=m +CONFIG_IEEE802154_SOCKET=m +CONFIG_IEEE802154_6LOWPAN=m +# CONFIG_MAC802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=m +CONFIG_NET_CLS_BPF=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_EMATCH_CANID=m +CONFIG_NET_EMATCH_IPSET=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +# CONFIG_NET_ACT_VLAN is not set +# CONFIG_NET_ACT_BPF is not set +# CONFIG_NET_ACT_CONNMARK is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_BLA=y +CONFIG_BATMAN_ADV_DAT=y +CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y +# CONFIG_BATMAN_ADV_DEBUG is not set +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=m +CONFIG_OPENVSWITCH_VXLAN=m +CONFIG_OPENVSWITCH_GENEVE=m +# CONFIG_VSOCKETS is not set +CONFIG_NETLINK_MMAP=y +CONFIG_NETLINK_DIAG=m +CONFIG_MPLS=y +CONFIG_NET_MPLS_GSO=y +# CONFIG_MPLS_ROUTING is not set +# CONFIG_HSR is not set +# CONFIG_NET_SWITCHDEV is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_NET_TCPPROBE is not set +CONFIG_NET_DROP_MONITOR=m +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_GW=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +CONFIG_CAN_SLCAN=m +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +# CONFIG_CAN_LEDS is not set +# CONFIG_CAN_TI_HECC is not set +# CONFIG_CAN_FLEXCAN is not set +# CONFIG_CAN_GRCAN is not set +# CONFIG_CAN_RCAR is not set +CONFIG_CAN_SJA1000=m +CONFIG_CAN_SJA1000_ISA=m +# CONFIG_CAN_SJA1000_PLATFORM is not set +# CONFIG_CAN_EMS_PCI is not set +# CONFIG_CAN_PEAK_PCI is not set +# CONFIG_CAN_KVASER_PCI is not set +# CONFIG_CAN_PLX_PCI is not set +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +# CONFIG_CAN_C_CAN_PCI is not set +# CONFIG_CAN_M_CAN is not set +# CONFIG_CAN_CC770 is not set + +# +# CAN SPI interfaces +# +CONFIG_CAN_MCP251X=m + +# +# CAN USB interfaces +# +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +CONFIG_CAN_GS_USB=m +CONFIG_CAN_KVASER_USB=m +CONFIG_CAN_PEAK_USB=m +CONFIG_CAN_8DEV_USB=m +CONFIG_CAN_SOFTING=m +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_BT_LE=y +CONFIG_BT_6LOWPAN=m +# CONFIG_BT_SELFTEST is not set +CONFIG_BT_DEBUGFS=y + +# +# Bluetooth device drivers +# +CONFIG_BT_INTEL=m +CONFIG_BT_BCM=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTUSB_BCM=y +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIUART_3WIRE=y +# CONFIG_BT_HCIUART_INTEL is not set +CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +# CONFIG_BT_HCIVHCI is not set +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +CONFIG_BT_WILINK=m +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +CONFIG_RXKAD=m +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_CERTIFICATION_ONUS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_WEXT=y +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RFKILL_GPIO is not set +CONFIG_NET_9P=m +CONFIG_NET_9P_VIRTIO=m +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set +CONFIG_NFC=m +CONFIG_NFC_DIGITAL=m +# CONFIG_NFC_NCI is not set +# CONFIG_NFC_HCI is not set + +# +# Near Field Communication (NFC) devices +# +CONFIG_NFC_PN533=m +# CONFIG_NFC_TRF7970A is not set +CONFIG_NFC_SIM=m +CONFIG_NFC_PORT100=m +CONFIG_HAVE_BPF_JIT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="am335x-pm-firmware.elf am335x-bone-scale-data.bin am335x-evm-scale-data.bin am43x-evm-scale-data.bin" +CONFIG_EXTRA_FIRMWARE_DIR="firmware" +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_ALLOW_DEV_COREDUMP=y +CONFIG_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_FENCE_TRACE is not set +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=24 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 + +# +# Bus devices +# +CONFIG_ARM_CCI=y +CONFIG_ARM_CCI400_COMMON=y +CONFIG_ARM_CCI400_PMU=y +# CONFIG_ARM_CCN is not set +# CONFIG_BRCMSTB_GISB_ARB is not set +CONFIG_OMAP_INTERCONNECT=y +CONFIG_OMAP_OCP2SCP=y +CONFIG_VEXPRESS_CONFIG=y +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_AR7_PARTS=m + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +CONFIG_RFD_FTL=m +CONFIG_SSFDC=m +# CONFIG_SM_FTL is not set +CONFIG_MTD_OOPS=m +CONFIG_MTD_SWAP=m +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=m +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +CONFIG_MTD_PLATRAM=m + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +CONFIG_MTD_DATAFLASH=m +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=m +CONFIG_MTD_SST25L=m +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +CONFIG_MTD_NAND_ECC=y +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_BCH=y +CONFIG_MTD_NAND_ECC_BCH=y +# CONFIG_MTD_SM_COMMON is not set +# CONFIG_MTD_NAND_DENALI is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=m +# CONFIG_MTD_NAND_OMAP_BCH is not set +# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_RICOH is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_DOCG4 is not set +# CONFIG_MTD_NAND_CAFE is not set +CONFIG_MTD_NAND_NANDSIM=m +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_NAND_HISI504 is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +# CONFIG_MTD_ONENAND_OTP is not set +CONFIG_MTD_ONENAND_2X_PROGRAM=y + +# +# LPDDR & LPDDR2 PCM memory drivers +# +CONFIG_MTD_LPDDR=m +CONFIG_MTD_QINFO_PROBE=m +# CONFIG_MTD_LPDDR2_NVM is not set +CONFIG_MTD_SPI_NOR=m +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_BLOCK=y +CONFIG_DTC=y +CONFIG_OF=y + +# +# Device Tree and Open Firmware support +# +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_MTD=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OF_RESOLVE=y +CONFIG_OF_OVERLAY=y +CONFIG_OF_CONFIGFS=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_PARPORT=m +# CONFIG_PARPORT_PC is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_NULL_BLK=m +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +CONFIG_ZRAM=m +CONFIG_ZRAM_LZ4_COMPRESS=y +# CONFIG_ZRAM_DEBUG is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_DRBD=m +# CONFIG_DRBD_FAULT_INJECTION is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_NVME is not set +CONFIG_BLK_DEV_OSD=m +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_PMEM is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m +# CONFIG_MG_DISK is not set +CONFIG_VIRTIO_BLK=m +CONFIG_BLK_DEV_RBD=m +# CONFIG_BLK_DEV_RSXX is not set + +# +# Misc devices +# +CONFIG_SENSORS_LIS3LV02D=m +CONFIG_AD525X_DPOT=m +CONFIG_AD525X_DPOT_I2C=m +CONFIG_AD525X_DPOT_SPI=m +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +CONFIG_ICS932S401=m +CONFIG_ENCLOSURE_SERVICES=m +# CONFIG_HP_ILO is not set +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1780=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +CONFIG_HMC6352=m +CONFIG_DS1682=m +CONFIG_TI_DAC7512=m +# CONFIG_BMP085_I2C is not set +# CONFIG_BMP085_SPI is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +CONFIG_VEXPRESS_SYSCFG=y +CONFIG_BONE_CAPEMGR=y +# CONFIG_DEV_OVERLAYMGR is not set +CONFIG_TIEQEP=m +CONFIG_C2PORT=m + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=m +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +CONFIG_TI_ST=m +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_SENSORS_LIS3_I2C=m + +# +# Altera FPGA firmware download module +# +CONFIG_ALTERA_STAPL=m + +# +# Intel MIC Bus Driver +# + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# Argus cape driver for beaglebone black +# +# CONFIG_CAPE_BONE_ARGUS is not set +CONFIG_BEAGLEBONE_PINMUX_HELPER=y +# CONFIG_ECHO is not set +# CONFIG_CXL_BASE is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_NETLINK=y +# CONFIG_SCSI_MQ_DEFAULT is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_SCSI_BNX2X_FCOE is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +CONFIG_SCSI_UFSHCD=m +# CONFIG_SCSI_UFSHCD_PCI is not set +# CONFIG_SCSI_UFSHCD_PLATFORM is not set +# CONFIG_SCSI_HPTIOP is not set +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_WD719X is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_BFA_FC is not set +CONFIG_SCSI_VIRTIO=m +# CONFIG_SCSI_CHELSIO_FCOE is not set +CONFIG_SCSI_DH=m +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_AHCI_PLATFORM=y +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +# CONFIG_MD_CLUSTER is not set +CONFIG_BCACHE=m +# CONFIG_BCACHE_DEBUG is not set +# CONFIG_BCACHE_CLOSURES_DEBUG is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_MQ_DEFAULT is not set +# CONFIG_DM_DEBUG is not set +CONFIG_DM_BUFIO=m +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_CACHE_MQ=m +CONFIG_DM_CACHE_CLEANER=m +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +CONFIG_DM_SWITCH=m +# CONFIG_DM_LOG_WRITES is not set +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +# CONFIG_TCM_USER2 is not set +CONFIG_LOOPBACK_TARGET=m +CONFIG_TCM_FC=m +CONFIG_ISCSI_TARGET=m +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_NETDEVICES=y +CONFIG_MII=m +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_EQUALIZER=m +# CONFIG_NET_FC is not set +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_IPVLAN is not set +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +# CONFIG_ARCNET is not set +CONFIG_ATM_DRIVERS=y +CONFIG_ATM_DUMMY=m +# CONFIG_ATM_TCP is not set +# CONFIG_ATM_LANAI is not set +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_NICSTAR is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_FORE200E is not set +# CONFIG_ATM_HE is not set +# CONFIG_ATM_SOLOS is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_AGERE=y +# CONFIG_ET131X is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +# CONFIG_NET_VENDOR_ARC is not set +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_ALX is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +# CONFIG_DM9000 is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EXAR=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_HISILICON is not set +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_IP1000 is not set +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_MLX5_CORE is not set +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_KSZ884X_PCI is not set +CONFIG_NET_VENDOR_MICROCHIP=y +CONFIG_ENC28J60=m +# CONFIG_ENC28J60_WRITEVERIFY is not set +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +CONFIG_NET_VENDOR_NATSEMI=y +# CONFIG_NATSEMI is not set +# CONFIG_NS83820 is not set +# CONFIG_NET_VENDOR_8390 is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_PACKET_ENGINE=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +# CONFIG_SFC is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=m +# CONFIG_EPIC100 is not set +CONFIG_SMC911X=m +CONFIG_SMSC911X=m +# CONFIG_SMSC911X_ARCH_HOOKS is not set +# CONFIG_SMSC9420 is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +CONFIG_TI_DAVINCI_MDIO=y +CONFIG_TI_DAVINCI_CPDMA=y +CONFIG_TI_CPSW_PHY_SEL=y +CONFIG_TI_CPSW_ALE=y +CONFIG_TI_CPSW=y +CONFIG_TI_CPTS=y +# CONFIG_TLAN is not set +# CONFIG_NET_VENDOR_VIA is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_AT803X_PHY=m +CONFIG_AMD_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=m +# CONFIG_BCM7XXX_PHY is not set +CONFIG_BCM87XX_PHY=m +CONFIG_ICPLUS_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_STE10XP=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_MICREL_PHY=y +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MDIO_BCM_UNIMAC is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9700=m +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_CDC_PHONET=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_WLAN=y +CONFIG_LIBERTAS_THINFIRM=m +# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set +CONFIG_LIBERTAS_THINFIRM_USB=m +# CONFIG_ATMEL is not set +CONFIG_AT76C50X_USB=m +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_NET_RNDIS_WLAN=m +# CONFIG_RTL8180 is not set +CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y +# CONFIG_ADM8211 is not set +CONFIG_MAC80211_HWSIM=m +# CONFIG_MWL8K is not set +CONFIG_ATH_COMMON=m +CONFIG_ATH_CARDS=m +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m +CONFIG_ATH9K_BTCOEX_SUPPORT=y +CONFIG_ATH9K=m +CONFIG_ATH9K_PCI=y +# CONFIG_ATH9K_AHB is not set +# CONFIG_ATH9K_DEBUGFS is not set +# CONFIG_ATH9K_DYNACK is not set +# CONFIG_ATH9K_WOW is not set +CONFIG_ATH9K_RFKILL=y +# CONFIG_ATH9K_CHANNEL_CONTEXT is not set +CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_HTC=m +# CONFIG_ATH9K_HTC_DEBUGFS is not set +CONFIG_CARL9170=m +CONFIG_CARL9170_LEDS=y +CONFIG_CARL9170_WPC=y +# CONFIG_CARL9170_HWRNG is not set +CONFIG_ATH6KL=m +CONFIG_ATH6KL_SDIO=m +CONFIG_ATH6KL_USB=m +# CONFIG_ATH6KL_DEBUG is not set +# CONFIG_ATH6KL_TRACING is not set +CONFIG_AR5523=m +# CONFIG_WIL6210 is not set +CONFIG_ATH10K=m +# CONFIG_ATH10K_PCI is not set +# CONFIG_ATH10K_DEBUG is not set +# CONFIG_ATH10K_DEBUGFS is not set +# CONFIG_ATH10K_TRACING is not set +# CONFIG_WCN36XX is not set +CONFIG_B43=m +CONFIG_B43_BCMA=y +CONFIG_B43_SSB=y +CONFIG_B43_BUSES_BCMA_AND_SSB=y +# CONFIG_B43_BUSES_BCMA is not set +# CONFIG_B43_BUSES_SSB is not set +CONFIG_B43_PCI_AUTOSELECT=y +CONFIG_B43_PCICORE_AUTOSELECT=y +CONFIG_B43_SDIO=y +CONFIG_B43_BCMA_PIO=y +CONFIG_B43_PIO=y +CONFIG_B43_PHY_G=y +CONFIG_B43_PHY_N=y +CONFIG_B43_PHY_LP=y +CONFIG_B43_PHY_HT=y +CONFIG_B43_LEDS=y +CONFIG_B43_HWRNG=y +# CONFIG_B43_DEBUG is not set +CONFIG_B43LEGACY=m +CONFIG_B43LEGACY_PCI_AUTOSELECT=y +CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y +CONFIG_B43LEGACY_LEDS=y +CONFIG_B43LEGACY_HWRNG=y +CONFIG_B43LEGACY_DEBUG=y +CONFIG_B43LEGACY_DMA=y +CONFIG_B43LEGACY_PIO=y +CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y +# CONFIG_B43LEGACY_DMA_MODE is not set +# CONFIG_B43LEGACY_PIO_MODE is not set +CONFIG_BRCMUTIL=m +CONFIG_BRCMSMAC=m +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_PROTO_BCDC=y +CONFIG_BRCMFMAC_SDIO=y +CONFIG_BRCMFMAC_USB=y +# CONFIG_BRCMFMAC_PCIE is not set +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +# CONFIG_HOSTAP_PLX is not set +# CONFIG_HOSTAP_PCI is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +CONFIG_IWLWIFI=m +CONFIG_IWLWIFI_LEDS=y +CONFIG_IWLDVM=m +# CONFIG_IWLMVM is not set +CONFIG_IWLWIFI_OPMODE_MODULAR=y + +# +# Debugging Options +# +# CONFIG_IWLWIFI_DEBUG is not set +# CONFIG_IWLWIFI_DEVICE_TRACING is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_LIBERTAS_MESH=y +# CONFIG_HERMES is not set +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +# CONFIG_P54_PCI is not set +# CONFIG_P54_SPI is not set +CONFIG_P54_LEDS=y +CONFIG_RT2X00=m +# CONFIG_RT2400PCI is not set +# CONFIG_RT2500PCI is not set +# CONFIG_RT61PCI is not set +# CONFIG_RT2800PCI is not set +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +CONFIG_RT2800USB_RT3573=y +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +# CONFIG_RT2800USB_UNKNOWN is not set +CONFIG_RT2800_LIB=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_WL_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_RTL_CARDS=m +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192EE is not set +# CONFIG_RTL8821AE is not set +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +CONFIG_RTLWIFI_USB=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192C_COMMON=m +CONFIG_WL_TI=y +CONFIG_WL1251=m +CONFIG_WL1251_SPI=m +CONFIG_WL1251_SDIO=m +CONFIG_WL12XX=m +CONFIG_WL18XX=m +CONFIG_WLCORE=m +CONFIG_WLCORE_SPI=m +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +# CONFIG_MWIFIEX is not set +# CONFIG_CW1200 is not set +CONFIG_RSI_91X=m +CONFIG_RSI_DEBUGFS=y +# CONFIG_RSI_SDIO is not set +CONFIG_RSI_USB=m + +# +# WiMAX Wireless Broadband devices +# +CONFIG_WIMAX_I2400M=m +CONFIG_WIMAX_I2400M_USB=m +CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 +# CONFIG_WAN is not set +CONFIG_IEEE802154_DRIVERS=m +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m +CONFIG_INPUT_MATRIXKMAP=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADP5588=m +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +CONFIG_KEYBOARD_QT2160=m +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +CONFIG_KEYBOARD_LM8323=m +# CONFIG_KEYBOARD_LM8333 is not set +CONFIG_KEYBOARD_MAX7359=m +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_OPENCORES=m +# CONFIG_KEYBOARD_SAMSUNG is not set +CONFIG_KEYBOARD_STOWAWAY=m +# CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_OMAP4=m +CONFIG_KEYBOARD_TWL4030=m +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_SENTELIC=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +# CONFIG_MOUSE_SERIAL is not set +CONFIG_MOUSE_APPLETOUCH=m +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +CONFIG_TABLET_USB_HANWANG=m +CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_SERIAL_WACOM4=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_PROPERTIES=y +CONFIG_TOUCHSCREEN_ADS7846=m +CONFIG_TOUCHSCREEN_AD7877=m +CONFIG_TOUCHSCREEN_AD7879=m +CONFIG_TOUCHSCREEN_AD7879_I2C=m +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AR1021_I2C is not set +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_DA9052 is not set +CONFIG_TOUCHSCREEN_DYNAPRO=m +CONFIG_TOUCHSCREEN_HAMPSHIRE=m +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_EGALAX is not set +CONFIG_TOUCHSCREEN_FUJITSU=m +# CONFIG_TOUCHSCREEN_GOODIX is not set +# CONFIG_TOUCHSCREEN_ILI210X is not set +CONFIG_TOUCHSCREEN_GUNZE=m +# CONFIG_TOUCHSCREEN_ELAN is not set +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +# CONFIG_TOUCHSCREEN_WACOM_I2C is not set +# CONFIG_TOUCHSCREEN_MAX11801 is not set +CONFIG_TOUCHSCREEN_MCS5000=m +# CONFIG_TOUCHSCREEN_MMS114 is not set +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +CONFIG_TOUCHSCREEN_MK712=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_EDT_FT5X06=y +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m +# CONFIG_TOUCHSCREEN_PIXCIR is not set +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +CONFIG_TOUCHSCREEN_MC13783=m +CONFIG_TOUCHSCREEN_USB_EGALAX=y +CONFIG_TOUCHSCREEN_USB_PANJIT=y +CONFIG_TOUCHSCREEN_USB_3M=y +CONFIG_TOUCHSCREEN_USB_ITM=y +CONFIG_TOUCHSCREEN_USB_ETURBO=y +CONFIG_TOUCHSCREEN_USB_GUNZE=y +CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y +CONFIG_TOUCHSCREEN_USB_IRTOUCH=y +CONFIG_TOUCHSCREEN_USB_IDEALTEK=y +CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y +CONFIG_TOUCHSCREEN_USB_GOTOP=y +CONFIG_TOUCHSCREEN_USB_JASTEC=y +CONFIG_TOUCHSCREEN_USB_ELO=y +CONFIG_TOUCHSCREEN_USB_E2I=y +CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y +CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y +CONFIG_TOUCHSCREEN_USB_NEXIO=y +CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y +CONFIG_TOUCHSCREEN_TOUCHIT213=m +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set +CONFIG_TOUCHSCREEN_TSC2005=m +CONFIG_TOUCHSCREEN_TSC2007=m +# CONFIG_TOUCHSCREEN_ST1232 is not set +CONFIG_TOUCHSCREEN_SUR40=m +# CONFIG_TOUCHSCREEN_SX8654 is not set +CONFIG_TOUCHSCREEN_TPS6507X=m +# CONFIG_TOUCHSCREEN_ZFORCE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +# CONFIG_INPUT_MC13783_PWRBUTTON is not set +CONFIG_INPUT_MMA8450=m +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +# CONFIG_INPUT_KXTJ9 is not set +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_TPS65218_PWRBUTTON is not set +# CONFIG_INPUT_AXP20X_PEK is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=m +CONFIG_INPUT_TWL4030_VIBRA=m +CONFIG_INPUT_TWL6040_VIBRA=m +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PALMAS_PWRBUTTON is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_DA9052_ONKEY is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_ALTERA_PS2=m +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +CONFIG_N_GSM=m +# CONFIG_TRACE_SINK is not set +CONFIG_DEVMEM=y +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_DMA is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_EM is not set +CONFIG_SERIAL_8250_OMAP=y +CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +# CONFIG_SERIAL_KGDB_NMI is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_CONSOLE_POLL=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OMAP is not set +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_BCM63XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# CONFIG_SERIAL_ST_ASC is not set +# CONFIG_TTY_PRINTK is not set +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +CONFIG_HVC_DRIVER=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=m +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_OMAP=m +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_HW_RANDOM_TPM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_TCG_TPM=m +CONFIG_TCG_TIS_I2C_ATMEL=m +# CONFIG_TCG_TIS_I2C_INFINEON is not set +# CONFIG_TCG_TIS_I2C_NUVOTON is not set +# CONFIG_TCG_ATMEL is not set +# CONFIG_TCG_TIS_ST33ZP24 is not set +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +CONFIG_I2C_ARB_GPIO_CHALLENGE=m +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +# CONFIG_I2C_MUX_PCA954x is not set +# CONFIG_I2C_MUX_PINCTRL is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CBUS_GPIO is not set +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +CONFIG_I2C_GPIO=y +CONFIG_I2C_OCORES=m +CONFIG_I2C_OMAP=y +CONFIG_I2C_PCA_PLATFORM=m +# CONFIG_I2C_PXA_PCI is not set +# CONFIG_I2C_RK3X is not set +CONFIG_I2C_SIMTEC=m +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_ROBOTFUZZ_OSIF=m +CONFIG_I2C_TAOS_EVM=m +CONFIG_I2C_TINY_USB=m +CONFIG_I2C_VIPERBOARD=m + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_SLAVE is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +CONFIG_SPI_BITBANG=y +CONFIG_SPI_BUTTERFLY=m +# CONFIG_SPI_CADENCE is not set +CONFIG_SPI_GPIO=y +CONFIG_SPI_LM70_LLP=m +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_OMAP24XX=m +# CONFIG_SPI_TI_QSPI is not set +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPMI is not set +CONFIG_HSI=m +CONFIG_HSI_BOARDINFO=y + +# +# HSI controllers +# + +# +# HSI clients +# +# CONFIG_HSI_CHAR is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set +# CONFIG_NTP_PPS is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PPS_CLIENT_GPIO=m + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +CONFIG_PINCTRL_AS3722=y +# CONFIG_PINCTRL_AMD is not set +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_TI_IODELAY=y +CONFIG_PINCTRL_PALMAS=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_OF_GPIO=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_OF_HELPER=y +CONFIG_GPIO_GENERIC=y + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_DWAPB is not set +# CONFIG_GPIO_EM is not set +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +CONFIG_GPIO_OMAP=y +# CONFIG_GPIO_SCH311X is not set +# CONFIG_GPIO_SYSCON is not set +# CONFIG_GPIO_VX855 is not set +# CONFIG_GPIO_ZEVIO is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=m +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set + +# +# MFD GPIO expanders +# +CONFIG_GPIO_DA9052=m +CONFIG_GPIO_PALMAS=y +# CONFIG_GPIO_TPS65910 is not set +CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_TWL6040=y + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# USB GPIO expanders +# +CONFIG_GPIO_VIPERBOARD=m +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_MATROX is not set +CONFIG_W1_MASTER_DS2490=m +CONFIG_W1_MASTER_DS2482=m +# CONFIG_W1_MASTER_DS1WM is not set +CONFIG_W1_MASTER_GPIO=m +# CONFIG_HDQ_MASTER_OMAP is not set + +# +# 1-wire Slaves +# +CONFIG_W1_SLAVE_THERM=m +CONFIG_W1_SLAVE_SMEM=m +# CONFIG_W1_SLAVE_DS2408 is not set +# CONFIG_W1_SLAVE_DS2413 is not set +# CONFIG_W1_SLAVE_DS2406 is not set +# CONFIG_W1_SLAVE_DS2423 is not set +CONFIG_W1_SLAVE_DS2431=m +CONFIG_W1_SLAVE_DS2433=m +# CONFIG_W1_SLAVE_DS2433_CRC is not set +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_DS2780 is not set +# CONFIG_W1_SLAVE_DS2781 is not set +# CONFIG_W1_SLAVE_DS28E04 is not set +CONFIG_W1_SLAVE_BQ27000=m +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +CONFIG_BATTERY_BQ27x00=m +CONFIG_BATTERY_BQ27X00_I2C=y +CONFIG_BATTERY_BQ27X00_PLATFORM=y +# CONFIG_BATTERY_DA9052 is not set +# CONFIG_AXP288_FUEL_GAUGE is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_BATTERY_TWL4030_MADC is not set +# CONFIG_BATTERY_RX51 is not set +CONFIG_CHARGER_ISP1704=m +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_TWL4030 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_MANAGER is not set +CONFIG_CHARGER_BQ2415X=m +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_POWER_RESET is not set +CONFIG_POWER_AVS=y +CONFIG_VOLTAGE_DOMAIN=y + +# +# Voltage Domain Framework Drivers +# +CONFIG_VOLTAGE_DOMAIN_OMAP=y +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7314 is not set +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +CONFIG_SENSORS_ADM1029=m +# CONFIG_SENSORS_ADM1031 is not set +CONFIG_SENSORS_ADM9240=m +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_DA9052_ADC is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_MC13783_ADC=m +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +CONFIG_SENSORS_G760A=m +CONFIG_SENSORS_G762=m +CONFIG_SENSORS_GPIO_FAN=y +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_IT87 is not set +CONFIG_SENSORS_JC42=m +# CONFIG_SENSORS_POWR1220 is not set +CONFIG_SENSORS_LINEAGE=m +# CONFIG_SENSORS_LTC2945 is not set +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +# CONFIG_SENSORS_LTC4222 is not set +CONFIG_SENSORS_LTC4245=m +# CONFIG_SENSORS_LTC4260 is not set +CONFIG_SENSORS_LTC4261=m +CONFIG_SENSORS_MAX1111=m +CONFIG_SENSORS_MAX16065=m +# CONFIG_SENSORS_MAX1619 is not set +CONFIG_SENSORS_MAX1668=m +# CONFIG_SENSORS_MAX197 is not set +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_HTU21 is not set +# CONFIG_SENSORS_MCP3021 is not set +CONFIG_SENSORS_ADCXX=m +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM70=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +CONFIG_SENSORS_LM93=m +# CONFIG_SENSORS_LM95234 is not set +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +# CONFIG_SENSORS_PC87360 is not set +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_NCT6683=m +CONFIG_SENSORS_NCT6775=m +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +# CONFIG_SENSORS_PWM_FAN is not set +# CONFIG_SENSORS_SHT15 is not set +CONFIG_SENSORS_SHT21=m +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_SIS5595 is not set +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +CONFIG_SENSORS_EMC2103=m +CONFIG_SENSORS_EMC6W201=m +# CONFIG_SENSORS_SMSC47M1 is not set +CONFIG_SENSORS_SMSC47M192=m +# CONFIG_SENSORS_SMSC47B397 is not set +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +# CONFIG_SENSORS_SCH5636 is not set +CONFIG_SENSORS_SMM665=m +# CONFIG_SENSORS_ADC128D818 is not set +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_ADS7871=m +CONFIG_SENSORS_AMC6821=m +# CONFIG_SENSORS_INA209 is not set +# CONFIG_SENSORS_INA2XX is not set +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=y +# CONFIG_SENSORS_TMP103 is not set +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +# CONFIG_SENSORS_TWL4030_MADC is not set +# CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VIA686A is not set +CONFIG_SENSORS_VT1211=m +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +# CONFIG_SENSORS_W83L785TS is not set +CONFIG_SENSORS_W83L786NG=m +# CONFIG_SENSORS_W83627HF is not set +CONFIG_SENSORS_W83627EHF=m +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_STEP_WISE=y +# CONFIG_THERMAL_GOV_BANG_BANG is not set +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_CPU_THERMAL=y +# CONFIG_CLOCK_THERMAL is not set +# CONFIG_THERMAL_EMULATION is not set +# CONFIG_IMX_THERMAL is not set + +# +# Texas Instruments thermal drivers +# +CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_DA9052_WATCHDOG=m +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=m +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=m +CONFIG_SSB_SPROM=y +CONFIG_SSB_BLOCKIO=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_B43_PCI_BRIDGE=y +CONFIG_SSB_SDIOHOST_POSSIBLE=y +CONFIG_SSB_SDIOHOST=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y +# CONFIG_SSB_DRIVER_GPIO is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +CONFIG_BCMA=m +CONFIG_BCMA_BLOCKIO=y +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_PCI=y +# CONFIG_BCMA_HOST_SOC is not set +CONFIG_BCMA_DRIVER_PCI=y +# CONFIG_BCMA_DRIVER_GMAC_CMN is not set +# CONFIG_BCMA_DRIVER_GPIO is not set +# CONFIG_BCMA_DEBUG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +CONFIG_MFD_AS3722=y +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +CONFIG_MFD_AXP20X=y +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_PMIC_DA903X is not set +CONFIG_PMIC_DA9052=y +CONFIG_MFD_DA9052_SPI=y +CONFIG_MFD_DA9052_I2C=y +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +CONFIG_MFD_MC13XXX=m +CONFIG_MFD_MC13XXX_SPI=m +CONFIG_MFD_MC13XXX_I2C=m +# CONFIG_MFD_HI6421_PMIC is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_INTEL_SOC_PMIC is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MFD_VIPERBOARD=m +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_PM8921_CORE is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RTSX_PCI is not set +# CONFIG_MFD_RT5033 is not set +CONFIG_MFD_RTSX_USB=m +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_RK808 is not set +# CONFIG_MFD_RN5T618 is not set +CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +CONFIG_MFD_SYSCON=y +CONFIG_MFD_TI_AM335X_TSCADC=m +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +CONFIG_MFD_OMAP_USB_HOST=y +CONFIG_MFD_PALMAS=y +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65090 is not set +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65218=y +# CONFIG_MFD_TPS6586X is not set +CONFIG_MFD_TPS65910=y +# CONFIG_MFD_TPS65912 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_POWER=y +CONFIG_MFD_TWL4030_AUDIO=y +CONFIG_TWL6040_CORE=y +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_VEXPRESS_SYSREG=y +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +CONFIG_REGULATOR_ANATOP=m +CONFIG_REGULATOR_AS3722=y +CONFIG_REGULATOR_AXP20X=m +CONFIG_REGULATOR_DA9052=m +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +CONFIG_REGULATOR_MC13XXX_CORE=m +CONFIG_REGULATOR_MC13783=m +CONFIG_REGULATOR_MC13892=m +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_PBIAS=y +# CONFIG_REGULATOR_PFUZE100 is not set +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_S2MPA01=m +CONFIG_REGULATOR_S2MPS11=m +CONFIG_REGULATOR_S5M8767=m +CONFIG_REGULATOR_TI_ABB=y +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65218=y +# CONFIG_REGULATOR_TPS6524X is not set +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_VEXPRESS=m +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +CONFIG_MEDIA_SDR_SUPPORT=y +CONFIG_MEDIA_RC_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=m +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_TUNER=m +CONFIG_V4L2_MEM2MEM_DEV=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_VIDEOBUF_DVB=m +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_DMA_CONTIG=m +CONFIG_VIDEOBUF2_VMALLOC=m +CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_DVB_CORE=m +CONFIG_DVB_NET=y +CONFIG_TTPCI_EEPROM=m +CONFIG_DVB_MAX_ADAPTERS=8 +CONFIG_DVB_DYNAMIC_MINORS=y + +# +# Media drivers +# +CONFIG_RC_CORE=m +CONFIG_RC_MAP=m +CONFIG_RC_DECODERS=y +CONFIG_LIRC=m +CONFIG_IR_LIRC_CODEC=m +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_SANYO_DECODER=m +CONFIG_IR_SHARP_DECODER=m +CONFIG_IR_MCE_KBD_DECODER=m +CONFIG_IR_XMP_DECODER=m +CONFIG_RC_DEVICES=y +CONFIG_RC_ATI_REMOTE=m +# CONFIG_IR_HIX5HD2 is not set +CONFIG_IR_IMON=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_IR_IGORPLUGUSB=m +CONFIG_IR_IGUANA=m +CONFIG_IR_TTUSBIR=m +CONFIG_RC_LOOPBACK=m +CONFIG_IR_GPIO_CIR=m +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_DTCS033=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STK1135=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +# CONFIG_USB_GSPCA_TOUPTEK is not set +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +CONFIG_VIDEO_CPIA2=m +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +CONFIG_VIDEO_USBTV=m + +# +# Analog TV USB devices +# +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_STK1160_COMMON=m +CONFIG_VIDEO_STK1160_AC97=y +CONFIG_VIDEO_STK1160=m +# CONFIG_VIDEO_GO7007 is not set + +# +# Analog/digital TV USB devices +# +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_AU0828_V4L2=y +CONFIG_VIDEO_AU0828_RC=y +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_RC=y +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +# CONFIG_VIDEO_TM6000 is not set + +# +# Digital TV USB devices +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_FRIIO=m +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_V2=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_AF9035=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_AZ6007=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_EC168=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_MXL111SF=m +CONFIG_DVB_USB_RTL28XXU=m +CONFIG_DVB_USB_DVBSKY=m +# CONFIG_DVB_TTUSB_BUDGET is not set +# CONFIG_DVB_TTUSB_DEC is not set +CONFIG_SMS_USB_DRV=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set +# CONFIG_DVB_AS102 is not set + +# +# Webcam, TV (analog/digital) USB devices +# +CONFIG_VIDEO_EM28XX=m +CONFIG_VIDEO_EM28XX_V4L2=m +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_EM28XX_RC=m + +# +# Software defined radio USB devices +# +CONFIG_USB_AIRSPY=m +CONFIG_USB_HACKRF=m +CONFIG_USB_MSI2500=m +# CONFIG_MEDIA_PCI_SUPPORT is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_AM437X_VPFE=m +# CONFIG_VIDEO_XILINX is not set +CONFIG_VIDEO_TI_CAL=m +CONFIG_VIDEO_TI_VIP=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m +# CONFIG_VIDEO_SH_VEU is not set +CONFIG_VIDEO_TI_VPE=m +# CONFIG_VIDEO_TI_VPE_DEBUG is not set +CONFIG_VIDEO_TI_VPDMA_HELPER=m +CONFIG_V4L_TEST_DRIVERS=y +CONFIG_VIDEO_VIVID=m +# CONFIG_VIDEO_VIM2M is not set + +# +# Supported MMC/SDIO adapters +# +CONFIG_SMS_SDIO_DRV=m +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_TEA575X=m +CONFIG_RADIO_SI470X=y +CONFIG_USB_SI470X=m +# CONFIG_I2C_SI470X is not set +CONFIG_RADIO_SI4713=m +# CONFIG_USB_SI4713 is not set +# CONFIG_PLATFORM_SI4713 is not set +CONFIG_I2C_SI4713=m +CONFIG_USB_MR800=m +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_MAXIRADIO is not set +CONFIG_RADIO_SHARK=m +CONFIG_RADIO_SHARK2=m +CONFIG_USB_KEENE=m +CONFIG_USB_RAREMONO=m +CONFIG_USB_MA901=m +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_SAA7706H is not set +# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_WL1273 is not set + +# +# Texas Instruments WL128x FM driver (ST based) +# +CONFIG_RADIO_WL128X=m +CONFIG_MEDIA_COMMON_OPTIONS=y + +# +# common driver options +# +CONFIG_VIDEO_CX2341X=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_CYPRESS_FIRMWARE=m +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_SMS_SIANO_MDTV=m +CONFIG_SMS_SIANO_RC=y +# CONFIG_SMS_SIANO_DEBUGFS is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, frontends) +# +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_MEDIA_ATTACH=y +CONFIG_VIDEO_IR_I2C=m + +# +# Encoders, decoders, sensors and other helper chips +# + +# +# Audio decoders, processors and mixers +# +CONFIG_VIDEO_TVAUDIO=m +CONFIG_VIDEO_TDA7432=m +CONFIG_VIDEO_TDA9840=m +CONFIG_VIDEO_TEA6415C=m +CONFIG_VIDEO_TEA6420=m +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS5345=m +CONFIG_VIDEO_CS53L32A=m +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_UDA1342 is not set +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_WM8739=m +CONFIG_VIDEO_VP27SMPX=m +# CONFIG_VIDEO_SONY_BTF_MPX is not set + +# +# RDS decoders +# +CONFIG_VIDEO_SAA6588=m + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_ADV7183 is not set +# CONFIG_VIDEO_ADV7604 is not set +# CONFIG_VIDEO_ADV7842 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_ML86V7667 is not set +# CONFIG_VIDEO_SAA7110 is not set +CONFIG_VIDEO_SAA711X=m +# CONFIG_VIDEO_TVP514X is not set +CONFIG_VIDEO_TVP5150=m +# CONFIG_VIDEO_TVP7002 is not set +# CONFIG_VIDEO_TW2804 is not set +# CONFIG_VIDEO_TW9903 is not set +# CONFIG_VIDEO_TW9906 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +CONFIG_VIDEO_SAA717X=m +CONFIG_VIDEO_CX25840=m + +# +# Video encoders +# +CONFIG_VIDEO_SAA7127=m +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV7343 is not set +# CONFIG_VIDEO_ADV7393 is not set +# CONFIG_VIDEO_ADV7511 is not set +# CONFIG_VIDEO_AD9389B is not set +# CONFIG_VIDEO_AK881X is not set +# CONFIG_VIDEO_THS8200 is not set + +# +# Camera sensor devices +# +CONFIG_VIDEO_OV2659=m +# CONFIG_VIDEO_OV7640 is not set +CONFIG_VIDEO_OV7670=m +# CONFIG_VIDEO_OV9650 is not set +CONFIG_VIDEO_OV1063X=m +# CONFIG_VIDEO_VS6624 is not set +# CONFIG_VIDEO_MT9M032 is not set +# CONFIG_VIDEO_MT9P031 is not set +# CONFIG_VIDEO_MT9T001 is not set +CONFIG_VIDEO_MT9V011=m +# CONFIG_VIDEO_MT9V032 is not set +CONFIG_VIDEO_MT9T11X=m +# CONFIG_VIDEO_SR030PC30 is not set +# CONFIG_VIDEO_NOON010PC30 is not set +# CONFIG_VIDEO_M5MOLS is not set +# CONFIG_VIDEO_S5K6AA is not set +# CONFIG_VIDEO_S5K6A3 is not set +# CONFIG_VIDEO_S5K4ECGX is not set +# CONFIG_VIDEO_S5K5BAF is not set +# CONFIG_VIDEO_SMIAPP is not set +# CONFIG_VIDEO_S5C73M3 is not set + +# +# Flash devices +# +# CONFIG_VIDEO_ADP1653 is not set +# CONFIG_VIDEO_AS3645A is not set +# CONFIG_VIDEO_LM3560 is not set +# CONFIG_VIDEO_LM3646 is not set + +# +# Video improvement chips +# +CONFIG_VIDEO_UPD64031A=m +CONFIG_VIDEO_UPD64083=m + +# +# Audio/Video compression chips +# +CONFIG_VIDEO_SAA6752HS=m + +# +# Miscellaneous helper chips +# +# CONFIG_VIDEO_THS7303 is not set +CONFIG_VIDEO_M52790=m + +# +# Sensors used on soc_camera driver +# + +# +# soc_camera sensor drivers +# +# CONFIG_SOC_CAMERA_IMX074 is not set +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_OV2640 is not set +# CONFIG_SOC_CAMERA_OV5642 is not set +# CONFIG_SOC_CAMERA_OV6650 is not set +# CONFIG_SOC_CAMERA_OV772X is not set +# CONFIG_SOC_CAMERA_OV9640 is not set +# CONFIG_SOC_CAMERA_OV9740 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +CONFIG_MEDIA_TUNER=m + +# +# Customize TV tuners +# +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MSI001=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m +CONFIG_MEDIA_TUNER_MXL301RF=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m + +# +# Customise DVB Frontends +# + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_S5H1432=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_DIB9000=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_HD29L2=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_RTL2832_SDR=m +CONFIG_DVB_SI2168=m +# CONFIG_DVB_AS102_FE is not set + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# +CONFIG_DVB_TC90522=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_SP2=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 + +# +# Direct Rendering Manager +# +CONFIG_DRM=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y + +# +# I2C encoder or helper chips +# +# CONFIG_DRM_I2C_ADV7511 is not set +# CONFIG_DRM_I2C_CH7006 is not set +# CONFIG_DRM_I2C_SIL164 is not set +CONFIG_DRM_I2C_NXP_TDA998X=y +# CONFIG_DRM_PTN3460 is not set +# CONFIG_DRM_PS8622 is not set +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_VMWGFX is not set +CONFIG_DRM_UDL=y +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +# CONFIG_DRM_ARMADA is not set +CONFIG_DRM_OMAP=y +CONFIG_DRM_OMAP_NUM_CRTCS=2 +CONFIG_DRM_TILCDC=m +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +# CONFIG_DRM_STI is not set + +# +# Frame buffer Devices +# +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_CMDLINE=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SMSCUFX=m +CONFIG_FB_UDL=m +# CONFIG_FB_DA8XX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +CONFIG_FB_SIMPLE=y +CONFIG_OMAP2_DSS_INIT=y +CONFIG_OMAP2_DSS=y +# CONFIG_OMAP2_DSS_DEBUG is not set +# CONFIG_OMAP2_DSS_DEBUGFS is not set +CONFIG_OMAP2_DSS_DPI=y +CONFIG_OMAP2_DSS_VENC=y +CONFIG_OMAP2_DSS_HDMI_COMMON=y +CONFIG_OMAP4_DSS_HDMI=y +CONFIG_OMAP5_DSS_HDMI=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y + +# +# OMAP Display Device Drivers (new device model) +# +CONFIG_DISPLAY_ENCODER_OPA362=y +# CONFIG_DISPLAY_ENCODER_TFP410 is not set +CONFIG_DISPLAY_ENCODER_TPD12S015=y +CONFIG_DISPLAY_DRA7EVM_ENCODER_TPD12S015=m +CONFIG_DISPLAY_ENCODER_SII9022=y +CONFIG_DISPLAY_ENCODER_SII9022_AUDIO_CODEC=y +CONFIG_DISPLAY_CONNECTOR_DVI=y +CONFIG_DISPLAY_CONNECTOR_HDMI=y +# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set +CONFIG_DISPLAY_PANEL_DPI=y +# CONFIG_DISPLAY_PANEL_DSI_CM is not set +CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m +# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set +# CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set +# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set +CONFIG_DISPLAY_PANEL_TLC59108=y +CONFIG_FB_SSD1307=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=y +# CONFIG_BACKLIGHT_DA9052 is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +# CONFIG_BACKLIGHT_LP855X is not set +# CONFIG_BACKLIGHT_PANDORA is not set +# CONFIG_BACKLIGHT_TPS65217 is not set +CONFIG_BACKLIGHT_GPIO=y +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_COMPRESS_OFFLOAD=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_SEQUENCER_OSS is not set +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_MAX_CARDS=32 +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +CONFIG_SND_ALOOP=m +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +CONFIG_SND_MTS64=m +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PORTMAN2X4=m +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SE6X is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +# CONFIG_SND_HDA_INTEL is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m +CONFIG_SND_USB_LINE6=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m +CONFIG_SND_SOC=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +# CONFIG_SND_ATMEL_SOC is not set +CONFIG_SND_EDMA_SOC=m +CONFIG_SND_DAVINCI_SOC_MCASP=m +CONFIG_SND_DAVINCI_SOC_GENERIC_EVM=m +CONFIG_SND_AM33XX_SOC_EVM=m +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +CONFIG_SND_SOC_FSL_SSI=m +CONFIG_SND_SOC_FSL_SPDIF=m +# CONFIG_SND_SOC_FSL_ESAI is not set +CONFIG_SND_SOC_IMX_AUDMUX=m +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_DMIC=m +CONFIG_SND_OMAP_SOC_MCBSP=m +CONFIG_SND_OMAP_SOC_MCPDM=m +CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m +CONFIG_SND_OMAP_SOC_RX51=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +CONFIG_SND_SOC_I2C_AND_SPI=y + +# +# CODEC drivers +# +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +CONFIG_SND_SOC_DMIC=m +CONFIG_SND_SOC_HDMI_CODEC=m +# CONFIG_SND_SOC_ES8328 is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1792A is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_RT5677_SPI is not set +CONFIG_SND_SOC_SGTL5000=m +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TFA9879 is not set +CONFIG_SND_SOC_TLV320AIC23=m +CONFIG_SND_SOC_TLV320AIC23_I2C=m +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +CONFIG_SND_SOC_TLV320AIC31XX=m +CONFIG_SND_SOC_TLV320AIC3X=m +# CONFIG_SND_SOC_TS3A227E is not set +CONFIG_SND_SOC_TWL4030=m +CONFIG_SND_SOC_TWL6040=m +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8978 is not set +CONFIG_SND_SOC_TPA6130A2=m +CONFIG_SND_SIMPLE_CARD=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID support +# +CONFIG_HID=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HIDRAW=y +CONFIG_UHID=y +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_ACRUX=m +CONFIG_HID_ACRUX_FF=y +CONFIG_HID_APPLE=y +CONFIG_HID_APPLEIR=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=y +CONFIG_HID_BETOP_FF=m +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CP2112=m +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EMS_FF=m +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=y +CONFIG_HID_HOLTEK=m +CONFIG_HOLTEK_FF=y +CONFIG_HID_GT683R=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LCPOWER=m +CONFIG_HID_LENOVO=m +CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH_DJ=y +CONFIG_HID_LOGITECH_HIDPP=y +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_LOGIG940_FF=y +CONFIG_LOGIWHEELS_FF=y +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTRIG=m +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PENMOUNT=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PICOLCD_CIR=y +CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PRIMAX=m +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_HUB=m +CONFIG_HID_SENSOR_CUSTOM_SENSOR=m + +# +# USB HID support +# +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# I2C HID support +# +# CONFIG_I2C_HID is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +CONFIG_USB_MON=y +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_XHCI_PLATFORM=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_HCD_OMAP=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_FUSBH200_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USB_U132_HCD=m +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +CONFIG_USB_HWA_HCD=m +# CONFIG_USB_HCD_BCMA is not set +# CONFIG_USB_HCD_SSB is not set +# CONFIG_USB_HCD_TEST_MODE is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +CONFIG_USBIP_CORE=m +CONFIG_USBIP_VHCI_HCD=m +CONFIG_USBIP_HOST=m +# CONFIG_USBIP_DEBUG is not set +CONFIG_USB_MUSB_HDRC=y +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_GADGET is not set +CONFIG_USB_MUSB_DUAL_ROLE=y + +# +# Platform Glue Layer +# +# CONFIG_USB_MUSB_TUSB6010 is not set +# CONFIG_USB_MUSB_OMAP2PLUS is not set +# CONFIG_USB_MUSB_AM35X is not set +CONFIG_USB_MUSB_DSPS=y +CONFIG_USB_MUSB_AM335X_CHILD=y +# CONFIG_USB_TI_CPPI41_DMA is not set +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y + +# +# Platform Glue Driver Support +# +CONFIG_USB_DWC3_OMAP=y +CONFIG_USB_DWC3_PCI=y + +# +# Debugging features +# +# CONFIG_USB_DWC3_DEBUG is not set +# CONFIG_USB_DWC2 is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_OF=y +CONFIG_USB_CHIPIDEA_PCI=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +# CONFIG_USB_CHIPIDEA_DEBUG is not set +# CONFIG_USB_ISP1760 is not set + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_F81232=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_METRO=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7715_PARPORT=y +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MXUPORT=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +CONFIG_USB_SERIAL_WISHBONE=m +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +CONFIG_USB_TRANCEVIBRATOR=m +CONFIG_USB_IOWARRIOR=m +CONFIG_USB_TEST=m +CONFIG_USB_EHSET_TEST_FIXTURE=m +CONFIG_USB_ISIGHTFW=m +CONFIG_USB_YUREX=m +CONFIG_USB_EZUSB_FX2=m +CONFIG_USB_HSIC_USB3503=m +# CONFIG_USB_LINK_LAYER_TEST is not set +CONFIG_USB_CHAOSKEY=m +# CONFIG_USB_ATM is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_AM335X_CONTROL_USB=y +CONFIG_AM335X_PHY_USB=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_ULPI=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FUSB300 is not set +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_BDC_UDC is not set +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_DUMMY_HCD is not set +CONFIG_USB_LIBCOMPOSITE=y +CONFIG_USB_U_ETHER=y +CONFIG_USB_F_ECM=y +CONFIG_USB_F_SUBSET=y +CONFIG_USB_F_RNDIS=y +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_GADGET_TARGET is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set +CONFIG_USB_LED_TRIG=y +CONFIG_UWB=m +CONFIG_UWB_HWA=m +# CONFIG_UWB_WHCI is not set +CONFIG_UWB_I1480U=m +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_CLKGATE is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=m +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_F_SDH30 is not set +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set +CONFIG_MMC_DW=m +# CONFIG_MMC_DW_IDMAC is not set +CONFIG_MMC_DW_PLTFM=m +CONFIG_MMC_DW_EXYNOS=m +# CONFIG_MMC_DW_K3 is not set +# CONFIG_MMC_DW_PCI is not set +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_REALTEK_USB=m +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set + +# +# LED drivers +# +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_LP3944=m +CONFIG_LEDS_LP55XX_COMMON=m +# CONFIG_LEDS_LP5521 is not set +CONFIG_LEDS_LP5523=m +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +CONFIG_LEDS_PCA955X=m +# CONFIG_LEDS_PCA963X is not set +CONFIG_LEDS_DA9052=m +CONFIG_LEDS_DAC124S085=m +CONFIG_LEDS_PWM=m +CONFIG_LEDS_REGULATOR=m +CONFIG_LEDS_BD2802=m +CONFIG_LEDS_LT3593=m +CONFIG_LEDS_MC13783=m +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_LM355x is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set +# CONFIG_LEDS_SYSCON is not set +# CONFIG_LEDS_PM8941_WLED is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +CONFIG_ACCESSIBILITY=y +CONFIG_A11Y_BRAILLE_CONSOLE=y +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1374_WDT=y +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_HYM8563=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_ISL12057=y +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PALMAS=y +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_PCF8523=y +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF85063=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_TPS65910=m +CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_S5M=y + +# +# SPI RTC drivers +# +CONFIG_RTC_DRV_M41T93=m +CONFIG_RTC_DRV_M41T94=m +CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1343=m +CONFIG_RTC_DRV_DS1347=m +CONFIG_RTC_DRV_DS1390=m +CONFIG_RTC_DRV_MAX6902=m +CONFIG_RTC_DRV_R9701=m +CONFIG_RTC_DRV_RS5C348=m +CONFIG_RTC_DRV_DS3234=m +CONFIG_RTC_DRV_PCF2123=m +CONFIG_RTC_DRV_RX4581=m +CONFIG_RTC_DRV_MCP795=m + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=m +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1685_FAMILY=m +CONFIG_RTC_DRV_DS1685=y +# CONFIG_RTC_DRV_DS1689 is not set +# CONFIG_RTC_DRV_DS17285 is not set +# CONFIG_RTC_DRV_DS17485 is not set +# CONFIG_RTC_DRV_DS17885 is not set +# CONFIG_RTC_DS1685_PROC_REGS is not set +# CONFIG_RTC_DS1685_SYSFS_REGS is not set +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_DA9052=y +CONFIG_RTC_DRV_STK17TA8=m +CONFIG_RTC_DRV_M48T86=m +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y +CONFIG_RTC_DRV_MC13XXX=m +CONFIG_RTC_DRV_SNVS=y +# CONFIG_RTC_DRV_XGENE is not set + +# +# HID Sensor RTC drivers +# +CONFIG_RTC_DRV_HID_SENSOR_TIME=m +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DW_DMAC_CORE=y +CONFIG_DW_DMAC=y +# CONFIG_DW_DMAC_PCI is not set +# CONFIG_HSU_DMA_PCI is not set +CONFIG_TI_EDMA=y +CONFIG_TI_DMA_CROSSBAR=y +CONFIG_DMA_OMAP=y +CONFIG_TI_CPPI41=y +# CONFIG_FSL_EDMA is not set +# CONFIG_NBPFAXI_DMA is not set +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_OF=y + +# +# DMA Clients +# +CONFIG_ASYNC_TX_DMA=y +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +# CONFIG_UIO_CIF is not set +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_UIO_DMEM_GENIRQ=m +# CONFIG_UIO_AEC is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_UIO_PCI_GENERIC is not set +# CONFIG_UIO_NETX is not set +CONFIG_UIO_PRUSS=m +# CONFIG_UIO_MF624 is not set +# CONFIG_VFIO is not set +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO=y + +# +# Virtio drivers +# +# CONFIG_VIRTIO_PCI is not set +CONFIG_VIRTIO_BALLOON=m +# CONFIG_VIRTIO_INPUT is not set +CONFIG_VIRTIO_MMIO=m +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_STAGING=y +# CONFIG_PRISM2_USB is not set +# CONFIG_COMEDI is not set +# CONFIG_PANEL is not set +# CONFIG_RTL8192U is not set +# CONFIG_RTLLIB is not set +CONFIG_R8712U=m +CONFIG_R8188EU=m +CONFIG_88EU_AP_MODE=y +# CONFIG_R8723AU is not set +# CONFIG_RTS5208 is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set + +# +# IIO staging drivers +# + +# +# Accelerometers +# +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16203 is not set +# CONFIG_ADIS16204 is not set +# CONFIG_ADIS16209 is not set +# CONFIG_ADIS16220 is not set +# CONFIG_ADIS16240 is not set +CONFIG_LIS3L02DQ=m +# CONFIG_SCA3000 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7606 is not set +# CONFIG_AD7780 is not set +# CONFIG_AD7816 is not set +# CONFIG_AD7192 is not set +# CONFIG_AD7280 is not set + +# +# Analog digital bi-direction converters +# +# CONFIG_ADT7316 is not set + +# +# Capacitance to digital converters +# +# CONFIG_AD7150 is not set +# CONFIG_AD7152 is not set +# CONFIG_AD7746 is not set + +# +# Direct Digital Synthesis +# +# CONFIG_AD9832 is not set +# CONFIG_AD9834 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16060 is not set + +# +# Network Analyzer, Impedance Converters +# +# CONFIG_AD5933 is not set + +# +# Light sensors +# +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_SENSORS_ISL29028 is not set +# CONFIG_TSL2583 is not set +# CONFIG_TSL2x7x is not set + +# +# Magnetometer sensors +# +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set + +# +# Active energy metering IC +# +# CONFIG_ADE7753 is not set +# CONFIG_ADE7754 is not set +# CONFIG_ADE7758 is not set +# CONFIG_ADE7759 is not set +# CONFIG_ADE7854 is not set + +# +# Resolver to digital converters +# +# CONFIG_AD2S90 is not set +# CONFIG_AD2S1200 is not set +# CONFIG_AD2S1210 is not set + +# +# Triggers - standalone +# +# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set +# CONFIG_IIO_SIMPLE_DUMMY is not set +# CONFIG_FB_SM7XX is not set +# CONFIG_FB_SM750 is not set +# CONFIG_FB_XGI is not set +# CONFIG_FT1000 is not set + +# +# Speakup console speech +# +CONFIG_SPEAKUP=m +CONFIG_SPEAKUP_SYNTH_ACNTSA=m +CONFIG_SPEAKUP_SYNTH_APOLLO=m +CONFIG_SPEAKUP_SYNTH_AUDPTR=m +CONFIG_SPEAKUP_SYNTH_BNS=m +CONFIG_SPEAKUP_SYNTH_DECTLK=m +CONFIG_SPEAKUP_SYNTH_DECEXT=m +CONFIG_SPEAKUP_SYNTH_LTLK=m +CONFIG_SPEAKUP_SYNTH_SOFT=m +CONFIG_SPEAKUP_SYNTH_SPKOUT=m +CONFIG_SPEAKUP_SYNTH_TXPRT=m +CONFIG_SPEAKUP_SYNTH_DUMMY=m +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +# CONFIG_STAGING_MEDIA is not set + +# +# Android +# +CONFIG_ASHMEM=y +CONFIG_ANDROID_TIMED_OUTPUT=y +CONFIG_ANDROID_TIMED_GPIO=m +# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set +CONFIG_SYNC=y +# CONFIG_SW_SYNC is not set +CONFIG_ION=y +# CONFIG_ION_TEST is not set +# CONFIG_ION_DUMMY is not set +# CONFIG_USB_WPAN_HCD is not set +# CONFIG_WIMAX_GDM72XX is not set +# CONFIG_LTE_GDM724X is not set +# CONFIG_MTD_SPINAND_MT29F is not set +# CONFIG_LUSTRE_FS is not set +# CONFIG_DGNC is not set +# CONFIG_DGAP is not set +# CONFIG_GS_FPGABOOT is not set +# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set +# CONFIG_FB_TFT is not set +# CONFIG_I2O is not set +# CONFIG_CHROME_PLATFORMS is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI570 is not set +CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_CLK_TWL6040=m +# CONFIG_CLK_QORIQ is not set +CONFIG_COMMON_CLK_PALMAS=y +# CONFIG_COMMON_CLK_PWM is not set +# CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +CONFIG_HWSPINLOCK=y + +# +# Hardware Spinlock drivers +# +CONFIG_HWSPINLOCK_OMAP=y + +# +# Clock Source drivers +# +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_MMIO=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +# CONFIG_ATMEL_PIT is not set +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_MAILBOX=y +CONFIG_OMAP2PLUS_MBOX=y +CONFIG_OMAP_MBOX_KFIFO_SIZE=256 +# CONFIG_ALTERA_MBOX is not set +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set +CONFIG_OF_IOMMU=y +CONFIG_OMAP_IOMMU=y +# CONFIG_OMAP_IOMMU_DEBUG is not set +# CONFIG_ARM_SMMU is not set + +# +# Remoteproc drivers +# +CONFIG_REMOTEPROC=y +CONFIG_OMAP_REMOTEPROC=y +# CONFIG_STE_MODEM_RPROC is not set +CONFIG_WKUP_M3_RPROC=y + +# +# Rpmsg drivers +# +CONFIG_RPMSG=y + +# +# SOC (System On Chip) specific Drivers +# +CONFIG_SOC_TI=y +CONFIG_WKUP_M3_IPC=y +CONFIG_PM_DEVFREQ=y + +# +# DEVFREQ Governors +# +CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y +CONFIG_DEVFREQ_GOV_PERFORMANCE=y +CONFIG_DEVFREQ_GOV_POWERSAVE=y +CONFIG_DEVFREQ_GOV_USERSPACE=y + +# +# DEVFREQ Drivers +# +# CONFIG_PM_DEVFREQ_EVENT is not set +CONFIG_EXTCON=y + +# +# Extcon Device Drivers +# +# CONFIG_EXTCON_ADC_JACK is not set +CONFIG_EXTCON_GPIO=y +CONFIG_EXTCON_PALMAS=y +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +CONFIG_EXTCON_USB_GPIO=y +CONFIG_MEMORY=y +CONFIG_TI_EMIF=y +CONFIG_OMAP_GPMC=y +CONFIG_TI_EMIF_SRAM=y +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +# CONFIG_IIO_BUFFER_CB is not set +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGERED_BUFFER=m +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 + +# +# Accelerometers +# +# CONFIG_BMA180 is not set +# CONFIG_BMC150_ACCEL is not set +CONFIG_HID_SENSOR_ACCEL_3D=m +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_MMA8452 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD799X is not set +# CONFIG_AXP288_ADC is not set +# CONFIG_CC10001_ADC is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_NAU7802 is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC128S052 is not set +CONFIG_TI_AM335X_ADC=m +CONFIG_TWL4030_MADC=m +# CONFIG_TWL6030_GPADC is not set +# CONFIG_VF610_ADC is not set +CONFIG_VIPERBOARD_ADC=m + +# +# Amplifiers +# +# CONFIG_AD8366 is not set + +# +# Hid Sensor IIO Common +# +CONFIG_HID_SENSOR_IIO_COMMON=m +CONFIG_HID_SENSOR_IIO_TRIGGER=m + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_AD5686 is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_MAX517 is not set +# CONFIG_MAX5821 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +CONFIG_HID_SENSOR_GYRO_3D=m +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set + +# +# Humidity sensors +# +# CONFIG_DHT11 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_IIO is not set + +# +# Light sensors +# +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM36651 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_ISL29125 is not set +CONFIG_HID_SENSOR_ALS=m +CONFIG_HID_SENSOR_PROX=m +# CONFIG_JSA1212 is not set +# CONFIG_LTR501 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +CONFIG_SENSORS_TSL2563=m +# CONFIG_TSL4531 is not set +# CONFIG_VCNL4000 is not set + +# +# Magnetometer sensors +# +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_MAG3110 is not set +CONFIG_HID_SENSOR_MAGNETOMETER_3D=m +# CONFIG_IIO_ST_MAGN_3AXIS is not set + +# +# Inclinometer sensors +# +CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m + +# +# Triggers - standalone +# +CONFIG_IIO_INTERRUPT_TRIGGER=m +CONFIG_IIO_SYSFS_TRIGGER=m + +# +# Pressure sensors +# +# CONFIG_BMP280 is not set +CONFIG_HID_SENSOR_PRESS=m +# CONFIG_MPL115 is not set +# CONFIG_MPL3115 is not set +# CONFIG_MS5611 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set + +# +# Proximity sensors +# +# CONFIG_SX9500 is not set + +# +# Temperature sensors +# +# CONFIG_MLX90614 is not set +# CONFIG_TMP006 is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_FSL_FTM is not set +# CONFIG_PWM_PCA9685 is not set +CONFIG_PWM_TIECAP=m +CONFIG_PWM_TIEHRPWM=m +CONFIG_PWM_TIPWMSS=y +CONFIG_PWM_TWL=m +CONFIG_PWM_TWL_LED=m +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_OMAP_IRQCHIP=y +CONFIG_IRQ_CROSSBAR=y +# CONFIG_IPACK_BUS is not set +# CONFIG_RESET_CONTROLLER is not set +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +# CONFIG_PHY_DM816X_USB is not set +CONFIG_OMAP_CONTROL_PHY=y +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set +# CONFIG_THUNDERBOLT is not set + +# +# Android +# +CONFIG_ANDROID=y +CONFIG_ANDROID_BINDER_IPC=y +CONFIG_ANDROID_BINDER_IPC_32BIT=y +CONFIG_NVMEM=y + +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_USE_FOR_EXT23=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ENCRYPTION=y +CONFIG_EXT4_FS_ENCRYPTION=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_XFS_FS=y +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +CONFIG_XFS_RT=y +# CONFIG_XFS_WARN is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_BTRFS_FS=y +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_ASSERT is not set +CONFIG_NILFS2_FS=m +CONFIG_F2FS_FS=y +CONFIG_F2FS_STAT_FS=y +CONFIG_F2FS_FS_XATTR=y +CONFIG_F2FS_FS_POSIX_ACL=y +CONFIG_F2FS_FS_SECURITY=y +# CONFIG_F2FS_CHECK_FS is not set +# CONFIG_F2FS_IO_TRACE is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=m +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=y + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_HFSPLUS_FS_POSIX_ACL is not set +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_UBIFS_FS=m +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_LOGFS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZ4=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +# CONFIG_HPFS_FS is not set +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m +# CONFIG_QNX6FS_DEBUG is not set +CONFIG_ROMFS_FS=m +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +# CONFIG_ROMFS_BACKED_BY_MTD is not set +CONFIG_ROMFS_BACKED_BY_BOTH=y +CONFIG_ROMFS_ON_BLOCK=y +CONFIG_ROMFS_ON_MTD=y +# CONFIG_PSTORE is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_EXOFS_FS=m +# CONFIG_EXOFS_DEBUG is not set +CONFIG_ORE=m +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_OBJLAYOUT=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_DEBUG=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +# CONFIG_NFSD_PNFS is not set +CONFIG_NFSD_V4_SECURITY_LABEL=y +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_SUNRPC_SWAP=y +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC_DEBUG=y +CONFIG_CEPH_FS=m +CONFIG_CEPH_FSCACHE=y +CONFIG_CEPH_FS_POSIX_ACL=y +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DEBUG=y +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_SMB2=y +CONFIG_CIFS_FSCACHE=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +# CONFIG_NCPFS_SMALLDOS is not set +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +# CONFIG_AFS_DEBUG is not set +CONFIG_AFS_FSCACHE=y +CONFIG_9P_FS=m +CONFIG_9P_FSCACHE=y +CONFIG_9P_FS_POSIX_ACL=y +CONFIG_9P_FS_SECURITY=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +CONFIG_DYNAMIC_DEBUG=y + +# +# Compile-time checks and compiler options +# +# CONFIG_DEBUG_INFO is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_READABLE_ASM is not set +CONFIG_UNUSED_SYMBOLS=y +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_SCHED_STACK_END_CHECK=y +# CONFIG_DEBUG_TIMEKEEPING is not set +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_PREEMPT=y + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_PROVE_RCU is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_CPU_STALL_INFO is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KPROBE_EVENT=y +CONFIG_UPROBE_EVENT=y +CONFIG_BPF_EVENTS=y +CONFIG_PROBE_EVENTS=y +CONFIG_DYNAMIC_FTRACE=y +# CONFIG_FUNCTION_PROFILER is not set +CONFIG_FTRACE_MCOUNT_RECORD=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_TRACEPOINT_BENCHMARK is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_RING_BUFFER_STARTUP_TEST is not set +# CONFIG_TRACE_ENUM_MAP_FILE is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_ASYNC_RAID6_TEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_MEMTEST is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_KGDB=y +CONFIG_KGDB_SERIAL_CONSOLE=y +# CONFIG_KGDB_TESTS is not set +CONFIG_KGDB_KDB=y +CONFIG_KDB_DEFAULT_ENABLE=0x1 +CONFIG_KDB_KEYBOARD=y +CONFIG_KDB_CONTINUE_CATASTROPHIC=0 +# CONFIG_ARM_PTDUMP is not set +# CONFIG_STRICT_DEVMEM is not set +CONFIG_ARM_UNWIND=y +CONFIG_OLD_MCOUNT=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_LL is not set +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_UART_BCM63XX is not set +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +# CONFIG_ARM_KPROBES_TEST is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_DEBUG_SET_MODULE_RONX is not set +# CONFIG_CORESIGHT is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_TRUSTED_KEYS is not set +CONFIG_ENCRYPTED_KEYS=y +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_SECURITY_PATH=y +CONFIG_LSM_MMAP_MIN_ADDR=32768 +CONFIG_SECURITY_SELINUX=y +# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set +# CONFIG_SECURITY_SELINUX_DISABLE is not set +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_SECURITY_TOMOYO=y +CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 +CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 +# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set +CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" +CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" +CONFIG_SECURITY_APPARMOR=y +CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_APPARMOR_HASH=y +CONFIG_SECURITY_YAMA=y +CONFIG_SECURITY_YAMA_STACKED=y +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +# CONFIG_EVM is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +# CONFIG_DEFAULT_SECURITY_APPARMOR is not set +# CONFIG_DEFAULT_SECURITY_YAMA is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_MCRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ABLK_HELPER=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=y + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST_COMMON=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +# CONFIG_CRYPTO_DRBG_MENU is not set +CONFIG_CRYPTO_USER_API=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +# CONFIG_CRYPTO_USER_API_RNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_CRYPTO_DEV_OMAP_SHAM=y +CONFIG_CRYPTO_DEV_OMAP_AES=y +CONFIG_CRYPTO_DEV_OMAP_DES=y +# CONFIG_ASYMMETRIC_KEY_TYPE is not set +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM=m +CONFIG_CRYPTO_SHA1_ARM_NEON=m +# CONFIG_CRYPTO_SHA1_ARM_CE is not set +# CONFIG_CRYPTO_SHA2_ARM_CE is not set +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM_NEON=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +# CONFIG_CRYPTO_AES_ARM_CE is not set +# CONFIG_CRYPTO_GHASH_ARM_CE is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=y +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_PERCPU_RWSEM=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=y +# CONFIG_CRC8 is not set +CONFIG_AUDIT_GENERIC=y +# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_COMPRESS=m +CONFIG_LZ4HC_COMPRESS=m +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +# CONFIG_XZ_DEC_X86 is not set +# CONFIG_XZ_DEC_POWERPC is not set +# CONFIG_XZ_DEC_IA64 is not set +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +# CONFIG_XZ_DEC_SPARC is not set +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_BCH=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_LRU_CACHE=m +CONFIG_AVERAGE=y +CONFIG_CORDIC=m +CONFIG_DDR=y +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_VIRTUALIZATION=y diff --git a/arch/arm/crypto/sha256-core.S b/arch/arm/crypto/sha256-core.S new file mode 100644 index 0000000000000..555a1a8eec90a --- /dev/null +++ b/arch/arm/crypto/sha256-core.S @@ -0,0 +1,2808 @@ + +@ ==================================================================== +@ Written by Andy Polyakov for the OpenSSL +@ project. The module is, however, dual licensed under OpenSSL and +@ CRYPTOGAMS licenses depending on where you obtain it. For further +@ details see http://www.openssl.org/~appro/cryptogams/. +@ +@ Permission to use under GPL terms is granted. +@ ==================================================================== + +@ SHA256 block procedure for ARMv4. May 2007. + +@ Performance is ~2x better than gcc 3.4 generated code and in "abso- +@ lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per +@ byte [on single-issue Xscale PXA250 core]. + +@ July 2010. +@ +@ Rescheduling for dual-issue pipeline resulted in 22% improvement on +@ Cortex A8 core and ~20 cycles per processed byte. + +@ February 2011. +@ +@ Profiler-assisted and platform-specific optimization resulted in 16% +@ improvement on Cortex A8 core and ~15.4 cycles per processed byte. + +@ September 2013. +@ +@ Add NEON implementation. On Cortex A8 it was measured to process one +@ byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon +@ S4 does it in 12.5 cycles too, but it's 50% faster than integer-only +@ code (meaning that latter performs sub-optimally, nothing was done +@ about it). + +@ May 2014. +@ +@ Add ARMv8 code path performing at 2.0 cpb on Apple A7. + +#ifndef __KERNEL__ +# include "arm_arch.h" +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 +#endif + +.text +#if __ARM_ARCH__<7 +.code 32 +#else +.syntax unified +# ifdef __thumb2__ +# define adrl adr +.thumb +# else +.code 32 +# endif +#endif + +.type K256,%object +.align 5 +K256: +.word 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 +.word 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 +.word 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 +.word 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 +.word 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc +.word 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da +.word 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 +.word 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 +.word 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 +.word 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 +.word 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 +.word 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 +.word 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 +.word 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 +.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 +.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 +.size K256,.-K256 +.word 0 @ terminator +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.LOPENSSL_armcap: +.word OPENSSL_armcap_P-sha256_block_data_order +#endif +.align 5 + +.global sha256_block_data_order +.type sha256_block_data_order,%function +sha256_block_data_order: +#if __ARM_ARCH__<7 + sub r3,pc,#8 @ sha256_block_data_order +#else + adr r3,sha256_block_data_order +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + ldr r12,.LOPENSSL_armcap + ldr r12,[r3,r12] @ OPENSSL_armcap_P + tst r12,#ARMV8_SHA256 + bne .LARMv8 + tst r12,#ARMV7_NEON + bne .LNEON +#endif + add r2,r1,r2,lsl#6 @ len to point at the end of inp + stmdb sp!,{r0,r1,r2,r4-r11,lr} + ldmia r0,{r4,r5,r6,r7,r8,r9,r10,r11} + sub r14,r3,#256+32 @ K256 + sub sp,sp,#16*4 @ alloca(X[16]) +.Loop: +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ magic + eor r12,r12,r12 +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 0 +# if 0==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r8,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 0 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 0==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r8,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#0*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 0==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 0<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#2*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#15*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 1 +# if 1==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r7,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 1 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 1==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r7,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#1*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 1==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 1<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#3*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#0*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 2 +# if 2==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r6,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 2 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 2==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r6,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#2*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 2==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 2<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#4*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#1*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 3 +# if 3==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r5,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 3 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 3==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r5,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#3*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 3==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 3<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#5*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#2*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 4 +# if 4==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r4,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 4 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 4==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r4,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#4*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 4==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 4<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#6*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#3*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 5 +# if 5==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r11,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 5 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 5==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r11,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#5*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 5==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 5<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#7*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#4*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 6 +# if 6==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r10,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 6 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 6==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r10,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#6*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 6==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 6<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#8*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#5*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 7 +# if 7==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r9,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 7 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 7==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r9,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#7*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 7==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 7<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#9*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#6*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 8 +# if 8==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r8,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 8 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 8==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r8,r8,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r8,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#8*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 8==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 8<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#10*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#7*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 9 +# if 9==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r7,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 9 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 9==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r7,r7,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r7,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#9*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 9==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 9<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#11*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#8*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 10 +# if 10==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r6,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 10 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 10==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r6,r6,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r6,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#10*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 10==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 10<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#12*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#9*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 11 +# if 11==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r5,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 11 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 11==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r5,r5,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r5,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#11*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 11==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 11<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#13*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#10*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 12 +# if 12==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r4,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 12 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 12==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r4,r4,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r4,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#12*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 12==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 12<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#14*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#11*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 13 +# if 13==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r11,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 13 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 13==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r11,r11,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r11,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#13*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 13==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 13<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#15*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#12*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 14 +# if 14==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + eor r0,r0,r10,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 14 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + ldrb r12,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r12,lsl#8 + ldrb r12,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 14==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r10,r10,ror#5 + orr r2,r2,r12,lsl#24 + eor r0,r0,r10,ror#19 @ Sigma1(e) +#endif + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#14*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 14==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 14<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#0*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#13*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + @ ldr r2,[r1],#4 @ 15 +# if 15==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + eor r0,r0,r9,ror#19 @ Sigma1(e) +# ifndef __ARMEB__ + rev r2,r2 +# endif +#else + @ ldrb r2,[r1,#3] @ 15 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + ldrb r3,[r1,#2] + ldrb r0,[r1,#1] + orr r2,r2,r3,lsl#8 + ldrb r3,[r1],#4 + orr r2,r2,r0,lsl#16 +# if 15==15 + str r1,[sp,#17*4] @ make room for r1 +# endif + eor r0,r9,r9,ror#5 + orr r2,r2,r3,lsl#24 + eor r0,r0,r9,ror#19 @ Sigma1(e) +#endif + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#15*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 15==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 15<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#1*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#14*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) +.Lrounds_16_xx: + @ ldr r2,[sp,#1*4] @ 16 + @ ldr r1,[sp,#14*4] + mov r0,r2,ror#7 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#0*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#9*4] + + add r12,r12,r0 + eor r0,r8,r8,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r8,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#0*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 16==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 16<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#2*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#15*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#2*4] @ 17 + @ ldr r1,[sp,#15*4] + mov r0,r2,ror#7 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#1*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#10*4] + + add r3,r3,r0 + eor r0,r7,r7,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r7,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#1*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 17==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 17<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#3*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#0*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#3*4] @ 18 + @ ldr r1,[sp,#0*4] + mov r0,r2,ror#7 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#2*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#11*4] + + add r12,r12,r0 + eor r0,r6,r6,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r6,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#2*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 18==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 18<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#4*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#1*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#4*4] @ 19 + @ ldr r1,[sp,#1*4] + mov r0,r2,ror#7 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#3*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#12*4] + + add r3,r3,r0 + eor r0,r5,r5,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r5,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#3*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 19==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 19<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#5*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#2*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#5*4] @ 20 + @ ldr r1,[sp,#2*4] + mov r0,r2,ror#7 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#4*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#13*4] + + add r12,r12,r0 + eor r0,r4,r4,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r4,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#4*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 20==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 20<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#6*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#3*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#6*4] @ 21 + @ ldr r1,[sp,#3*4] + mov r0,r2,ror#7 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#5*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#14*4] + + add r3,r3,r0 + eor r0,r11,r11,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r11,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#5*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 21==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 21<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#7*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#4*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#7*4] @ 22 + @ ldr r1,[sp,#4*4] + mov r0,r2,ror#7 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#6*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#15*4] + + add r12,r12,r0 + eor r0,r10,r10,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r10,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#6*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 22==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 22<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#8*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#5*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#8*4] @ 23 + @ ldr r1,[sp,#5*4] + mov r0,r2,ror#7 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#7*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#0*4] + + add r3,r3,r0 + eor r0,r9,r9,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r9,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#7*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 23==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 23<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#9*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#6*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#9*4] @ 24 + @ ldr r1,[sp,#6*4] + mov r0,r2,ror#7 + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#8*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#1*4] + + add r12,r12,r0 + eor r0,r8,r8,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r8,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r11,r11,r2 @ h+=X[i] + str r2,[sp,#8*4] + eor r2,r9,r10 + add r11,r11,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r8 + add r11,r11,r12 @ h+=K256[i] + eor r2,r2,r10 @ Ch(e,f,g) + eor r0,r4,r4,ror#11 + add r11,r11,r2 @ h+=Ch(e,f,g) +#if 24==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 24<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r4,r5 @ a^b, b^c in next round +#else + ldr r2,[sp,#10*4] @ from future BODY_16_xx + eor r12,r4,r5 @ a^b, b^c in next round + ldr r1,[sp,#7*4] @ from future BODY_16_xx +#endif + eor r0,r0,r4,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r7,r7,r11 @ d+=h + eor r3,r3,r5 @ Maj(a,b,c) + add r11,r11,r0,ror#2 @ h+=Sigma0(a) + @ add r11,r11,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#10*4] @ 25 + @ ldr r1,[sp,#7*4] + mov r0,r2,ror#7 + add r11,r11,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#9*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#2*4] + + add r3,r3,r0 + eor r0,r7,r7,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r7,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r10,r10,r2 @ h+=X[i] + str r2,[sp,#9*4] + eor r2,r8,r9 + add r10,r10,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r7 + add r10,r10,r3 @ h+=K256[i] + eor r2,r2,r9 @ Ch(e,f,g) + eor r0,r11,r11,ror#11 + add r10,r10,r2 @ h+=Ch(e,f,g) +#if 25==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 25<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r11,r4 @ a^b, b^c in next round +#else + ldr r2,[sp,#11*4] @ from future BODY_16_xx + eor r3,r11,r4 @ a^b, b^c in next round + ldr r1,[sp,#8*4] @ from future BODY_16_xx +#endif + eor r0,r0,r11,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r6,r6,r10 @ d+=h + eor r12,r12,r4 @ Maj(a,b,c) + add r10,r10,r0,ror#2 @ h+=Sigma0(a) + @ add r10,r10,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#11*4] @ 26 + @ ldr r1,[sp,#8*4] + mov r0,r2,ror#7 + add r10,r10,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#10*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#3*4] + + add r12,r12,r0 + eor r0,r6,r6,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r6,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r9,r9,r2 @ h+=X[i] + str r2,[sp,#10*4] + eor r2,r7,r8 + add r9,r9,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r6 + add r9,r9,r12 @ h+=K256[i] + eor r2,r2,r8 @ Ch(e,f,g) + eor r0,r10,r10,ror#11 + add r9,r9,r2 @ h+=Ch(e,f,g) +#if 26==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 26<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r10,r11 @ a^b, b^c in next round +#else + ldr r2,[sp,#12*4] @ from future BODY_16_xx + eor r12,r10,r11 @ a^b, b^c in next round + ldr r1,[sp,#9*4] @ from future BODY_16_xx +#endif + eor r0,r0,r10,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r5,r5,r9 @ d+=h + eor r3,r3,r11 @ Maj(a,b,c) + add r9,r9,r0,ror#2 @ h+=Sigma0(a) + @ add r9,r9,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#12*4] @ 27 + @ ldr r1,[sp,#9*4] + mov r0,r2,ror#7 + add r9,r9,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#11*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#4*4] + + add r3,r3,r0 + eor r0,r5,r5,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r5,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r8,r8,r2 @ h+=X[i] + str r2,[sp,#11*4] + eor r2,r6,r7 + add r8,r8,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r5 + add r8,r8,r3 @ h+=K256[i] + eor r2,r2,r7 @ Ch(e,f,g) + eor r0,r9,r9,ror#11 + add r8,r8,r2 @ h+=Ch(e,f,g) +#if 27==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 27<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r9,r10 @ a^b, b^c in next round +#else + ldr r2,[sp,#13*4] @ from future BODY_16_xx + eor r3,r9,r10 @ a^b, b^c in next round + ldr r1,[sp,#10*4] @ from future BODY_16_xx +#endif + eor r0,r0,r9,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r4,r4,r8 @ d+=h + eor r12,r12,r10 @ Maj(a,b,c) + add r8,r8,r0,ror#2 @ h+=Sigma0(a) + @ add r8,r8,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#13*4] @ 28 + @ ldr r1,[sp,#10*4] + mov r0,r2,ror#7 + add r8,r8,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#12*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#5*4] + + add r12,r12,r0 + eor r0,r4,r4,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r4,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r7,r7,r2 @ h+=X[i] + str r2,[sp,#12*4] + eor r2,r5,r6 + add r7,r7,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r4 + add r7,r7,r12 @ h+=K256[i] + eor r2,r2,r6 @ Ch(e,f,g) + eor r0,r8,r8,ror#11 + add r7,r7,r2 @ h+=Ch(e,f,g) +#if 28==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 28<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r8,r9 @ a^b, b^c in next round +#else + ldr r2,[sp,#14*4] @ from future BODY_16_xx + eor r12,r8,r9 @ a^b, b^c in next round + ldr r1,[sp,#11*4] @ from future BODY_16_xx +#endif + eor r0,r0,r8,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r11,r11,r7 @ d+=h + eor r3,r3,r9 @ Maj(a,b,c) + add r7,r7,r0,ror#2 @ h+=Sigma0(a) + @ add r7,r7,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#14*4] @ 29 + @ ldr r1,[sp,#11*4] + mov r0,r2,ror#7 + add r7,r7,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#13*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#6*4] + + add r3,r3,r0 + eor r0,r11,r11,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r11,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r6,r6,r2 @ h+=X[i] + str r2,[sp,#13*4] + eor r2,r4,r5 + add r6,r6,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r11 + add r6,r6,r3 @ h+=K256[i] + eor r2,r2,r5 @ Ch(e,f,g) + eor r0,r7,r7,ror#11 + add r6,r6,r2 @ h+=Ch(e,f,g) +#if 29==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 29<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r7,r8 @ a^b, b^c in next round +#else + ldr r2,[sp,#15*4] @ from future BODY_16_xx + eor r3,r7,r8 @ a^b, b^c in next round + ldr r1,[sp,#12*4] @ from future BODY_16_xx +#endif + eor r0,r0,r7,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r10,r10,r6 @ d+=h + eor r12,r12,r8 @ Maj(a,b,c) + add r6,r6,r0,ror#2 @ h+=Sigma0(a) + @ add r6,r6,r12 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#15*4] @ 30 + @ ldr r1,[sp,#12*4] + mov r0,r2,ror#7 + add r6,r6,r12 @ h+=Maj(a,b,c) from the past + mov r12,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r12,r12,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#14*4] + eor r12,r12,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#7*4] + + add r12,r12,r0 + eor r0,r10,r10,ror#5 @ from BODY_00_15 + add r2,r2,r12 + eor r0,r0,r10,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r12,[r14],#4 @ *K256++ + add r5,r5,r2 @ h+=X[i] + str r2,[sp,#14*4] + eor r2,r11,r4 + add r5,r5,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r10 + add r5,r5,r12 @ h+=K256[i] + eor r2,r2,r4 @ Ch(e,f,g) + eor r0,r6,r6,ror#11 + add r5,r5,r2 @ h+=Ch(e,f,g) +#if 30==31 + and r12,r12,#0xff + cmp r12,#0xf2 @ done? +#endif +#if 30<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r12,r6,r7 @ a^b, b^c in next round +#else + ldr r2,[sp,#0*4] @ from future BODY_16_xx + eor r12,r6,r7 @ a^b, b^c in next round + ldr r1,[sp,#13*4] @ from future BODY_16_xx +#endif + eor r0,r0,r6,ror#20 @ Sigma0(a) + and r3,r3,r12 @ (b^c)&=(a^b) + add r9,r9,r5 @ d+=h + eor r3,r3,r7 @ Maj(a,b,c) + add r5,r5,r0,ror#2 @ h+=Sigma0(a) + @ add r5,r5,r3 @ h+=Maj(a,b,c) + @ ldr r2,[sp,#0*4] @ 31 + @ ldr r1,[sp,#13*4] + mov r0,r2,ror#7 + add r5,r5,r3 @ h+=Maj(a,b,c) from the past + mov r3,r1,ror#17 + eor r0,r0,r2,ror#18 + eor r3,r3,r1,ror#19 + eor r0,r0,r2,lsr#3 @ sigma0(X[i+1]) + ldr r2,[sp,#15*4] + eor r3,r3,r1,lsr#10 @ sigma1(X[i+14]) + ldr r1,[sp,#8*4] + + add r3,r3,r0 + eor r0,r9,r9,ror#5 @ from BODY_00_15 + add r2,r2,r3 + eor r0,r0,r9,ror#19 @ Sigma1(e) + add r2,r2,r1 @ X[i] + ldr r3,[r14],#4 @ *K256++ + add r4,r4,r2 @ h+=X[i] + str r2,[sp,#15*4] + eor r2,r10,r11 + add r4,r4,r0,ror#6 @ h+=Sigma1(e) + and r2,r2,r9 + add r4,r4,r3 @ h+=K256[i] + eor r2,r2,r11 @ Ch(e,f,g) + eor r0,r5,r5,ror#11 + add r4,r4,r2 @ h+=Ch(e,f,g) +#if 31==31 + and r3,r3,#0xff + cmp r3,#0xf2 @ done? +#endif +#if 31<15 +# if __ARM_ARCH__>=7 + ldr r2,[r1],#4 @ prefetch +# else + ldrb r2,[r1,#3] +# endif + eor r3,r5,r6 @ a^b, b^c in next round +#else + ldr r2,[sp,#1*4] @ from future BODY_16_xx + eor r3,r5,r6 @ a^b, b^c in next round + ldr r1,[sp,#14*4] @ from future BODY_16_xx +#endif + eor r0,r0,r5,ror#20 @ Sigma0(a) + and r12,r12,r3 @ (b^c)&=(a^b) + add r8,r8,r4 @ d+=h + eor r12,r12,r6 @ Maj(a,b,c) + add r4,r4,r0,ror#2 @ h+=Sigma0(a) + @ add r4,r4,r12 @ h+=Maj(a,b,c) +#if __ARM_ARCH__>=7 + ite eq @ Thumb2 thing, sanity check in ARM +#endif + ldreq r3,[sp,#16*4] @ pull ctx + bne .Lrounds_16_xx + + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldr r0,[r3,#0] + ldr r2,[r3,#4] + ldr r12,[r3,#8] + add r4,r4,r0 + ldr r0,[r3,#12] + add r5,r5,r2 + ldr r2,[r3,#16] + add r6,r6,r12 + ldr r12,[r3,#20] + add r7,r7,r0 + ldr r0,[r3,#24] + add r8,r8,r2 + ldr r2,[r3,#28] + add r9,r9,r12 + ldr r1,[sp,#17*4] @ pull inp + ldr r12,[sp,#18*4] @ pull inp+len + add r10,r10,r0 + add r11,r11,r2 + stmia r3,{r4,r5,r6,r7,r8,r9,r10,r11} + cmp r1,r12 + sub r14,r14,#256 @ rewind Ktbl + bne .Loop + + add sp,sp,#19*4 @ destroy frame +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r11,pc} +#else + ldmia sp!,{r4-r11,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size sha256_block_data_order,.-sha256_block_data_order +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + +.global sha256_block_data_order_neon +.type sha256_block_data_order_neon,%function +.align 4 +sha256_block_data_order_neon: +.LNEON: + stmdb sp!,{r4-r12,lr} + + sub r11,sp,#16*4+16 + adrl r14,K256 + bic r11,r11,#15 @ align for 128-bit stores + mov r12,sp + mov sp,r11 @ alloca + add r2,r1,r2,lsl#6 @ len to point at the end of inp + + vld1.8 {q0},[r1]! + vld1.8 {q1},[r1]! + vld1.8 {q2},[r1]! + vld1.8 {q3},[r1]! + vld1.32 {q8},[r14,:128]! + vld1.32 {q9},[r14,:128]! + vld1.32 {q10},[r14,:128]! + vld1.32 {q11},[r14,:128]! + vrev32.8 q0,q0 @ yes, even on + str r0,[sp,#64] + vrev32.8 q1,q1 @ big-endian + str r1,[sp,#68] + mov r1,sp + vrev32.8 q2,q2 + str r2,[sp,#72] + vrev32.8 q3,q3 + str r12,[sp,#76] @ save original sp + vadd.i32 q8,q8,q0 + vadd.i32 q9,q9,q1 + vst1.32 {q8},[r1,:128]! + vadd.i32 q10,q10,q2 + vst1.32 {q9},[r1,:128]! + vadd.i32 q11,q11,q3 + vst1.32 {q10},[r1,:128]! + vst1.32 {q11},[r1,:128]! + + ldmia r0,{r4-r11} + sub r1,r1,#64 + ldr r2,[sp,#0] + eor r12,r12,r12 + eor r3,r5,r6 + b .L_00_48 + +.align 4 +.L_00_48: + vext.8 q8,q0,q1,#4 + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + vext.8 q9,q2,q3,#4 + add r4,r4,r12 + and r2,r2,r8 + eor r12,r0,r8,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vadd.i32 q0,q0,q9 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + vshr.u32 q9,q8,#3 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#4] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + veor q9,q9,q10 + add r10,r10,r2 + vsli.32 q11,q8,#14 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + vshr.u32 d24,d7,#17 + add r11,r11,r3 + and r2,r2,r7 + veor q9,q9,q11 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + vsli.32 d24,d7,#15 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + vshr.u32 d25,d7,#10 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + vadd.i32 q0,q0,q9 + add r10,r10,r2 + ldr r2,[sp,#8] + veor d25,d25,d24 + and r12,r12,r3 + add r6,r6,r10 + vshr.u32 d24,d7,#19 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + vsli.32 d24,d7,#13 + add r9,r9,r2 + eor r2,r7,r8 + veor d25,d25,d24 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + vadd.i32 d0,d0,d25 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + vshr.u32 d24,d0,#17 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + vsli.32 d24,d0,#15 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + vshr.u32 d25,d0,#10 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + veor d25,d25,d24 + ldr r2,[sp,#12] + and r3,r3,r12 + vshr.u32 d24,d0,#19 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + vld1.32 {q8},[r14,:128]! + add r8,r8,r2 + vsli.32 d24,d0,#13 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + veor d25,d25,d24 + add r9,r9,r3 + and r2,r2,r5 + vadd.i32 d1,d1,d25 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + vadd.i32 q8,q8,q0 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#16] + and r12,r12,r3 + add r4,r4,r8 + vst1.32 {q8},[r1,:128]! + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vext.8 q8,q1,q2,#4 + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + vext.8 q9,q3,q0,#4 + add r8,r8,r12 + and r2,r2,r4 + eor r12,r0,r4,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vadd.i32 q1,q1,q9 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + vshr.u32 q9,q8,#3 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#20] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + veor q9,q9,q10 + add r6,r6,r2 + vsli.32 q11,q8,#14 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + vshr.u32 d24,d1,#17 + add r7,r7,r3 + and r2,r2,r11 + veor q9,q9,q11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + vsli.32 d24,d1,#15 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + vshr.u32 d25,d1,#10 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + vadd.i32 q1,q1,q9 + add r6,r6,r2 + ldr r2,[sp,#24] + veor d25,d25,d24 + and r12,r12,r3 + add r10,r10,r6 + vshr.u32 d24,d1,#19 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + vsli.32 d24,d1,#13 + add r5,r5,r2 + eor r2,r11,r4 + veor d25,d25,d24 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + vadd.i32 d2,d2,d25 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + vshr.u32 d24,d2,#17 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + vsli.32 d24,d2,#15 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + vshr.u32 d25,d2,#10 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + veor d25,d25,d24 + ldr r2,[sp,#28] + and r3,r3,r12 + vshr.u32 d24,d2,#19 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + vld1.32 {q8},[r14,:128]! + add r4,r4,r2 + vsli.32 d24,d2,#13 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + veor d25,d25,d24 + add r5,r5,r3 + and r2,r2,r9 + vadd.i32 d3,d3,d25 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + vadd.i32 q8,q8,q1 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[sp,#32] + and r12,r12,r3 + add r8,r8,r4 + vst1.32 {q8},[r1,:128]! + add r4,r4,r0,ror#2 + eor r12,r12,r6 + vext.8 q8,q2,q3,#4 + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + vext.8 q9,q0,q1,#4 + add r4,r4,r12 + and r2,r2,r8 + eor r12,r0,r8,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vadd.i32 q2,q2,q9 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + vshr.u32 q9,q8,#3 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#36] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + veor q9,q9,q10 + add r10,r10,r2 + vsli.32 q11,q8,#14 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + vshr.u32 d24,d3,#17 + add r11,r11,r3 + and r2,r2,r7 + veor q9,q9,q11 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + vsli.32 d24,d3,#15 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + vshr.u32 d25,d3,#10 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + vadd.i32 q2,q2,q9 + add r10,r10,r2 + ldr r2,[sp,#40] + veor d25,d25,d24 + and r12,r12,r3 + add r6,r6,r10 + vshr.u32 d24,d3,#19 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + vsli.32 d24,d3,#13 + add r9,r9,r2 + eor r2,r7,r8 + veor d25,d25,d24 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + vadd.i32 d4,d4,d25 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + vshr.u32 d24,d4,#17 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + vsli.32 d24,d4,#15 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + vshr.u32 d25,d4,#10 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + veor d25,d25,d24 + ldr r2,[sp,#44] + and r3,r3,r12 + vshr.u32 d24,d4,#19 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + vld1.32 {q8},[r14,:128]! + add r8,r8,r2 + vsli.32 d24,d4,#13 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + veor d25,d25,d24 + add r9,r9,r3 + and r2,r2,r5 + vadd.i32 d5,d5,d25 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + vadd.i32 q8,q8,q2 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#48] + and r12,r12,r3 + add r4,r4,r8 + vst1.32 {q8},[r1,:128]! + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vext.8 q8,q3,q0,#4 + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + vext.8 q9,q1,q2,#4 + add r8,r8,r12 + and r2,r2,r4 + eor r12,r0,r4,ror#19 + vshr.u32 q10,q8,#7 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vadd.i32 q3,q3,q9 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + vshr.u32 q9,q8,#3 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vsli.32 q10,q8,#25 + ldr r2,[sp,#52] + and r3,r3,r12 + vshr.u32 q11,q8,#18 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + veor q9,q9,q10 + add r6,r6,r2 + vsli.32 q11,q8,#14 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + vshr.u32 d24,d5,#17 + add r7,r7,r3 + and r2,r2,r11 + veor q9,q9,q11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + vsli.32 d24,d5,#15 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + vshr.u32 d25,d5,#10 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + vadd.i32 q3,q3,q9 + add r6,r6,r2 + ldr r2,[sp,#56] + veor d25,d25,d24 + and r12,r12,r3 + add r10,r10,r6 + vshr.u32 d24,d5,#19 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + vsli.32 d24,d5,#13 + add r5,r5,r2 + eor r2,r11,r4 + veor d25,d25,d24 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + vadd.i32 d6,d6,d25 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + vshr.u32 d24,d6,#17 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + vsli.32 d24,d6,#15 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + vshr.u32 d25,d6,#10 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + veor d25,d25,d24 + ldr r2,[sp,#60] + and r3,r3,r12 + vshr.u32 d24,d6,#19 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + vld1.32 {q8},[r14,:128]! + add r4,r4,r2 + vsli.32 d24,d6,#13 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + veor d25,d25,d24 + add r5,r5,r3 + and r2,r2,r9 + vadd.i32 d7,d7,d25 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + vadd.i32 q8,q8,q3 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[r14] + and r12,r12,r3 + add r8,r8,r4 + vst1.32 {q8},[r1,:128]! + add r4,r4,r0,ror#2 + eor r12,r12,r6 + teq r2,#0 @ check for K256 terminator + ldr r2,[sp,#0] + sub r1,r1,#64 + bne .L_00_48 + + ldr r1,[sp,#68] + ldr r0,[sp,#72] + sub r14,r14,#256 @ rewind r14 + teq r1,r0 + it eq + subeq r1,r1,#64 @ avoid SEGV + vld1.8 {q0},[r1]! @ load next input block + vld1.8 {q1},[r1]! + vld1.8 {q2},[r1]! + vld1.8 {q3},[r1]! + it ne + strne r1,[sp,#68] + mov r1,sp + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + add r4,r4,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r8 + eor r12,r0,r8,ror#19 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vrev32.8 q0,q0 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vadd.i32 q8,q8,q0 + ldr r2,[sp,#4] + and r3,r3,r12 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + add r10,r10,r2 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + add r11,r11,r3 + and r2,r2,r7 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + add r10,r10,r2 + ldr r2,[sp,#8] + and r12,r12,r3 + add r6,r6,r10 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + add r9,r9,r2 + eor r2,r7,r8 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + ldr r2,[sp,#12] + and r3,r3,r12 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + add r8,r8,r2 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + add r9,r9,r3 + and r2,r2,r5 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#16] + and r12,r12,r3 + add r4,r4,r8 + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vst1.32 {q8},[r1,:128]! + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + add r8,r8,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r4 + eor r12,r0,r4,ror#19 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vrev32.8 q1,q1 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vadd.i32 q8,q8,q1 + ldr r2,[sp,#20] + and r3,r3,r12 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + add r6,r6,r2 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + add r7,r7,r3 + and r2,r2,r11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + add r6,r6,r2 + ldr r2,[sp,#24] + and r12,r12,r3 + add r10,r10,r6 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + add r5,r5,r2 + eor r2,r11,r4 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + ldr r2,[sp,#28] + and r3,r3,r12 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + add r4,r4,r2 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + add r5,r5,r3 + and r2,r2,r9 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[sp,#32] + and r12,r12,r3 + add r8,r8,r4 + add r4,r4,r0,ror#2 + eor r12,r12,r6 + vst1.32 {q8},[r1,:128]! + add r11,r11,r2 + eor r2,r9,r10 + eor r0,r8,r8,ror#5 + add r4,r4,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r8 + eor r12,r0,r8,ror#19 + eor r0,r4,r4,ror#11 + eor r2,r2,r10 + vrev32.8 q2,q2 + add r11,r11,r12,ror#6 + eor r12,r4,r5 + eor r0,r0,r4,ror#20 + add r11,r11,r2 + vadd.i32 q8,q8,q2 + ldr r2,[sp,#36] + and r3,r3,r12 + add r7,r7,r11 + add r11,r11,r0,ror#2 + eor r3,r3,r5 + add r10,r10,r2 + eor r2,r8,r9 + eor r0,r7,r7,ror#5 + add r11,r11,r3 + and r2,r2,r7 + eor r3,r0,r7,ror#19 + eor r0,r11,r11,ror#11 + eor r2,r2,r9 + add r10,r10,r3,ror#6 + eor r3,r11,r4 + eor r0,r0,r11,ror#20 + add r10,r10,r2 + ldr r2,[sp,#40] + and r12,r12,r3 + add r6,r6,r10 + add r10,r10,r0,ror#2 + eor r12,r12,r4 + add r9,r9,r2 + eor r2,r7,r8 + eor r0,r6,r6,ror#5 + add r10,r10,r12 + and r2,r2,r6 + eor r12,r0,r6,ror#19 + eor r0,r10,r10,ror#11 + eor r2,r2,r8 + add r9,r9,r12,ror#6 + eor r12,r10,r11 + eor r0,r0,r10,ror#20 + add r9,r9,r2 + ldr r2,[sp,#44] + and r3,r3,r12 + add r5,r5,r9 + add r9,r9,r0,ror#2 + eor r3,r3,r11 + add r8,r8,r2 + eor r2,r6,r7 + eor r0,r5,r5,ror#5 + add r9,r9,r3 + and r2,r2,r5 + eor r3,r0,r5,ror#19 + eor r0,r9,r9,ror#11 + eor r2,r2,r7 + add r8,r8,r3,ror#6 + eor r3,r9,r10 + eor r0,r0,r9,ror#20 + add r8,r8,r2 + ldr r2,[sp,#48] + and r12,r12,r3 + add r4,r4,r8 + add r8,r8,r0,ror#2 + eor r12,r12,r10 + vst1.32 {q8},[r1,:128]! + add r7,r7,r2 + eor r2,r5,r6 + eor r0,r4,r4,ror#5 + add r8,r8,r12 + vld1.32 {q8},[r14,:128]! + and r2,r2,r4 + eor r12,r0,r4,ror#19 + eor r0,r8,r8,ror#11 + eor r2,r2,r6 + vrev32.8 q3,q3 + add r7,r7,r12,ror#6 + eor r12,r8,r9 + eor r0,r0,r8,ror#20 + add r7,r7,r2 + vadd.i32 q8,q8,q3 + ldr r2,[sp,#52] + and r3,r3,r12 + add r11,r11,r7 + add r7,r7,r0,ror#2 + eor r3,r3,r9 + add r6,r6,r2 + eor r2,r4,r5 + eor r0,r11,r11,ror#5 + add r7,r7,r3 + and r2,r2,r11 + eor r3,r0,r11,ror#19 + eor r0,r7,r7,ror#11 + eor r2,r2,r5 + add r6,r6,r3,ror#6 + eor r3,r7,r8 + eor r0,r0,r7,ror#20 + add r6,r6,r2 + ldr r2,[sp,#56] + and r12,r12,r3 + add r10,r10,r6 + add r6,r6,r0,ror#2 + eor r12,r12,r8 + add r5,r5,r2 + eor r2,r11,r4 + eor r0,r10,r10,ror#5 + add r6,r6,r12 + and r2,r2,r10 + eor r12,r0,r10,ror#19 + eor r0,r6,r6,ror#11 + eor r2,r2,r4 + add r5,r5,r12,ror#6 + eor r12,r6,r7 + eor r0,r0,r6,ror#20 + add r5,r5,r2 + ldr r2,[sp,#60] + and r3,r3,r12 + add r9,r9,r5 + add r5,r5,r0,ror#2 + eor r3,r3,r7 + add r4,r4,r2 + eor r2,r10,r11 + eor r0,r9,r9,ror#5 + add r5,r5,r3 + and r2,r2,r9 + eor r3,r0,r9,ror#19 + eor r0,r5,r5,ror#11 + eor r2,r2,r11 + add r4,r4,r3,ror#6 + eor r3,r5,r6 + eor r0,r0,r5,ror#20 + add r4,r4,r2 + ldr r2,[sp,#64] + and r12,r12,r3 + add r8,r8,r4 + add r4,r4,r0,ror#2 + eor r12,r12,r6 + vst1.32 {q8},[r1,:128]! + ldr r0,[r2,#0] + add r4,r4,r12 @ h+=Maj(a,b,c) from the past + ldr r12,[r2,#4] + ldr r3,[r2,#8] + ldr r1,[r2,#12] + add r4,r4,r0 @ accumulate + ldr r0,[r2,#16] + add r5,r5,r12 + ldr r12,[r2,#20] + add r6,r6,r3 + ldr r3,[r2,#24] + add r7,r7,r1 + ldr r1,[r2,#28] + add r8,r8,r0 + str r4,[r2],#4 + add r9,r9,r12 + str r5,[r2],#4 + add r10,r10,r3 + str r6,[r2],#4 + add r11,r11,r1 + str r7,[r2],#4 + stmia r2,{r8-r11} + + ittte ne + movne r1,sp + ldrne r2,[sp,#0] + eorne r12,r12,r12 + ldreq sp,[sp,#76] @ restore original sp + itt ne + eorne r3,r5,r6 + bne .L_00_48 + + ldmia sp!,{r4-r12,pc} +.size sha256_block_data_order_neon,.-sha256_block_data_order_neon +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + +# ifdef __thumb2__ +# define INST(a,b,c,d) .byte c,d|0xc,a,b +# else +# define INST(a,b,c,d) .byte a,b,c,d +# endif + +.type sha256_block_data_order_armv8,%function +.align 5 +sha256_block_data_order_armv8: +.LARMv8: + vld1.32 {q0,q1},[r0] +# ifdef __thumb2__ + adr r3,.LARMv8 + sub r3,r3,#.LARMv8-K256 +# else + adrl r3,K256 +# endif + add r2,r1,r2,lsl#6 @ len to point at the end of inp + +.Loop_v8: + vld1.8 {q8-q9},[r1]! + vld1.8 {q10-q11},[r1]! + vld1.32 {q12},[r3]! + vrev32.8 q8,q8 + vrev32.8 q9,q9 + vrev32.8 q10,q10 + vrev32.8 q11,q11 + vmov q14,q0 @ offload + vmov q15,q1 + teq r1,r2 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + INST(0xe2,0x03,0xfa,0xf3) @ sha256su0 q8,q9 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe6,0x0c,0x64,0xf3) @ sha256su1 q8,q10,q11 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + INST(0xe4,0x23,0xfa,0xf3) @ sha256su0 q9,q10 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe0,0x2c,0x66,0xf3) @ sha256su1 q9,q11,q8 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q10 + INST(0xe6,0x43,0xfa,0xf3) @ sha256su0 q10,q11 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe2,0x4c,0x60,0xf3) @ sha256su1 q10,q8,q9 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q11 + INST(0xe0,0x63,0xfa,0xf3) @ sha256su0 q11,q8 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe4,0x6c,0x62,0xf3) @ sha256su1 q11,q9,q10 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + INST(0xe2,0x03,0xfa,0xf3) @ sha256su0 q8,q9 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe6,0x0c,0x64,0xf3) @ sha256su1 q8,q10,q11 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + INST(0xe4,0x23,0xfa,0xf3) @ sha256su0 q9,q10 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe0,0x2c,0x66,0xf3) @ sha256su1 q9,q11,q8 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q10 + INST(0xe6,0x43,0xfa,0xf3) @ sha256su0 q10,q11 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe2,0x4c,0x60,0xf3) @ sha256su1 q10,q8,q9 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q11 + INST(0xe0,0x63,0xfa,0xf3) @ sha256su0 q11,q8 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe4,0x6c,0x62,0xf3) @ sha256su1 q11,q9,q10 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + INST(0xe2,0x03,0xfa,0xf3) @ sha256su0 q8,q9 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe6,0x0c,0x64,0xf3) @ sha256su1 q8,q10,q11 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + INST(0xe4,0x23,0xfa,0xf3) @ sha256su0 q9,q10 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe0,0x2c,0x66,0xf3) @ sha256su1 q9,q11,q8 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q10 + INST(0xe6,0x43,0xfa,0xf3) @ sha256su0 q10,q11 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + INST(0xe2,0x4c,0x60,0xf3) @ sha256su1 q10,q8,q9 + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q11 + INST(0xe0,0x63,0xfa,0xf3) @ sha256su0 q11,q8 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + INST(0xe4,0x6c,0x62,0xf3) @ sha256su1 q11,q9,q10 + vld1.32 {q13},[r3]! + vadd.i32 q12,q12,q8 + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + + vld1.32 {q12},[r3]! + vadd.i32 q13,q13,q9 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + + vld1.32 {q13},[r3] + vadd.i32 q12,q12,q10 + sub r3,r3,#256-16 @ rewind + vmov q2,q0 + INST(0x68,0x0c,0x02,0xf3) @ sha256h q0,q1,q12 + INST(0x68,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q12 + + vadd.i32 q13,q13,q11 + vmov q2,q0 + INST(0x6a,0x0c,0x02,0xf3) @ sha256h q0,q1,q13 + INST(0x6a,0x2c,0x14,0xf3) @ sha256h2 q1,q2,q13 + + vadd.i32 q0,q0,q14 + vadd.i32 q1,q1,q15 + it ne + bne .Loop_v8 + + vst1.32 {q0,q1},[r0] + + bx lr @ bx lr +.size sha256_block_data_order_armv8,.-sha256_block_data_order_armv8 +#endif +.asciz "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by " +.align 2 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.comm OPENSSL_armcap_P,4,4 +#endif diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 871b8267d211a..cd49cb609d0ba 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -50,7 +50,7 @@ #error Your compiler is too buggy; it is known to miscompile kernels. #error Known good compilers: 3.3, 4.x #endif -#if GCC_VERSION >= 40800 && GCC_VERSION < 40803 +#if GCC_VERSION >= 40800 && GCC_VERSION < 40802 #error Your compiler is too buggy; it is known to miscompile kernels #error and result in filesystem corruption and oopses. #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6c777e908a244..13656b6f2f58a 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -1136,3 +1136,12 @@ const struct seq_operations cpuinfo_op = { .stop = c_stop, .show = c_show }; + +/* export the cache management functions */ +#ifndef MULTI_CACHE + +EXPORT_SYMBOL(__glue(_CACHE,_dma_map_area)); +EXPORT_SYMBOL(__glue(_CACHE,_dma_unmap_area)); +EXPORT_SYMBOL(__glue(_CACHE,_dma_flush_range)); + +#endif diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 33e16148d366c..9c44a12c5b17e 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -128,8 +128,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct omap_device *od; struct omap_hwmod *oh; struct device_node *node = pdev->dev.of_node; - const char *oh_name; - int oh_cnt, i, ret = 0; + const char *oh_name, *rst_name; + int oh_cnt, dstr_cnt, i, ret = 0; bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); @@ -180,6 +180,26 @@ static int omap_device_build_from_dt(struct platform_device *pdev) omap_device_enable(pdev); pm_runtime_set_active(&pdev->dev); } + dstr_cnt = + of_property_count_strings(node, "ti,deassert-hard-reset"); + if (dstr_cnt > 0) { + for (i = 0; i < dstr_cnt; i += 2) { + of_property_read_string_index( + node, "ti,deassert-hard-reset", i, + &oh_name); + of_property_read_string_index( + node, "ti,deassert-hard-reset", i+1, + &rst_name); + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + dev_warn(&pdev->dev, + "Cannot parse deassert property for '%s'\n", + oh_name); + break; + } + omap_hwmod_deassert_hardreset(oh, rst_name); + } + } odbfd_exit1: kfree(hwmods); @@ -212,6 +232,26 @@ static int _omap_device_check_reidle_hwmods(struct omap_device *od) return 0; } +static void _omap_device_cleanup(struct omap_device *od) +{ + struct omap_hwmod *oh; + int i; + + for (i = 0; i < od->hwmods_cnt; i++) { + + oh = od->hwmods[i]; + + /* shutdown hwmods */ + omap_hwmod_shutdown(oh); + + /* we don't remove clocks cause there's no API to do so */ + /* no harm done, since they will not be created next time */ + } + + /* cleanup the structure now */ + omap_device_delete(od); +} + static int _omap_device_notifier_call(struct notifier_block *nb, unsigned long event, void *dev) { @@ -219,9 +259,12 @@ static int _omap_device_notifier_call(struct notifier_block *nb, struct omap_device *od; switch (event) { - case BUS_NOTIFY_DEL_DEVICE: - if (pdev->archdata.od) - omap_device_delete(pdev->archdata.od); + case BUS_NOTIFY_UNBOUND_DRIVER: + /* NOTIFY_DEL_DEVICE is not the right call... */ + od = pdev->archdata.od; + pdev->archdata.od = NULL; + if (od) + _omap_device_cleanup(od); break; case BUS_NOTIFY_BOUND_DRIVER: od = to_omap_device(pdev); diff --git a/arch/arm/mach-omap2/opp33xx_data.c b/arch/arm/mach-omap2/opp33xx_data.c index 0e07186f64edf..c4f5e1efbf589 100644 --- a/arch/arm/mach-omap2/opp33xx_data.c +++ b/arch/arm/mach-omap2/opp33xx_data.c @@ -49,7 +49,7 @@ static struct omap_opp_def am33xx_es2_x_opp_list[] __initdata = { /* MPU OPP4 - OPPTurbo */ OPP_INITIALIZER("mpu", true, 800000000, 1260000), /* MPU OPP5 - OPPNitro */ - OPP_INITIALIZER("mpu", false, 1000000000, 1325000), + OPP_INITIALIZER("mpu", true, 1000000000, 1325000), }; /* From AM335x TRM, SPRUH73H, Section 9.3.50 */ diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index e6df4b5808360..6ee1c1f2c7754 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -17,6 +17,7 @@ #include #include +#include #include #include @@ -36,6 +37,13 @@ struct pdata_init { struct of_dev_auxdata omap_auxdata_lookup[]; static struct twl4030_gpio_platform_data twl_gpio_auxdata; +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) +static struct gfx_sgx_platform_data gfx_pdata = { + .reset_name = "gfx", + .deassert_reset = omap_device_deassert_hardreset, +}; +#endif + #ifdef CONFIG_MACH_NOKIA_N8X0 static void __init omap2420_n8x0_legacy_init(void) { @@ -341,6 +349,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3", &wkup_m3_data), #endif +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) + OF_DEV_AUXDATA("ti,sgx", 0x56000000, "56000000.sgx", + &gfx_pdata), +#endif #ifdef CONFIG_ARCH_OMAP4 OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata), diff --git a/drivers/Kconfig b/drivers/Kconfig index c0cc96bab9e74..69d730501e48d 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -182,4 +182,6 @@ source "drivers/thunderbolt/Kconfig" source "drivers/android/Kconfig" +source "drivers/nvmem/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 46d2554be4045..f86b8976fb788 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -165,3 +165,4 @@ obj-$(CONFIG_RAS) += ras/ obj-$(CONFIG_THUNDERBOLT) += thunderbolt/ obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/ obj-$(CONFIG_ANDROID) += android/ +obj-$(CONFIG_NVMEM) += nvmem/ diff --git a/drivers/base/platform.c b/drivers/base/platform.c index ebf034b972785..9b7ee7399c2f9 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -377,7 +377,7 @@ int platform_device_add(struct platform_device *pdev) struct resource *r = &pdev->resource[i]; unsigned long type = resource_type(r); - if (type == IORESOURCE_MEM || type == IORESOURCE_IO) + if (r->parent) release_resource(r); } @@ -410,7 +410,7 @@ void platform_device_del(struct platform_device *pdev) struct resource *r = &pdev->resource[i]; unsigned long type = resource_type(r); - if (type == IORESOURCE_MEM || type == IORESOURCE_IO) + if (r->parent) release_resource(r); } } diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 1c76dcb502cf3..4b6a7ade5df79 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -2612,6 +2612,30 @@ int regmap_get_val_bytes(struct regmap *map) } EXPORT_SYMBOL_GPL(regmap_get_val_bytes); +/** + * regmap_get_max_register(): Report the max register value + * + * Report the max register value, mainly intended to for use by + * generic infrastructure built on top of regmap. + */ +int regmap_get_max_register(struct regmap *map) +{ + return map->max_register ? map->max_register : -EINVAL; +} +EXPORT_SYMBOL_GPL(regmap_get_max_register); + +/** + * regmap_get_reg_stride(): Report the register address stride + * + * Report the register address stride, mainly intended to for use by + * generic infrastructure built on top of regmap. + */ +int regmap_get_reg_stride(struct regmap *map) +{ + return map->reg_stride; +} +EXPORT_SYMBOL_GPL(regmap_get_reg_stride); + int regmap_parse_val(struct regmap *map, const void *buf, unsigned int *val) { diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index ff7df95de3bf2..038e481a8f693 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -85,6 +85,20 @@ config GPIO_SYSFS Kernel drivers may also request that a particular GPIO be exported to userspace; this can be useful when debugging. +config GPIO_OF_HELPER + bool "GPIO OF helper device (EXPERIMENTAL)" + depends on OF_GPIO + help + Say Y here to add an GPIO OF helper driver + + Allows you specify a GPIO helper based on OF + which allows simple export of GPIO functionality + in user-space. + + Features include, value set/get, direction control, + interrupt/value change poll support, event counting + and others. + config GPIO_GENERIC tristate diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index f71bb971329c9..a527a82fe1289 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o obj-$(CONFIG_OF_GPIO) += gpiolib-of.o obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o +obj-$(CONFIG_GPIO_OF_HELPER) += gpio-of-helper.o # Device drivers. Generally keep list sorted alphabetically obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o diff --git a/drivers/gpio/gpio-of-helper.c b/drivers/gpio/gpio-of-helper.c new file mode 100644 index 0000000000000..a9f260bd2fee6 --- /dev/null +++ b/drivers/gpio/gpio-of-helper.c @@ -0,0 +1,429 @@ +/* + * GPIO OF based helper + * + * A simple DT based driver to provide access to GPIO functionality + * to user-space via sysfs. + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* fwd decl. */ +struct gpio_of_helper_info; + +enum gpio_type { + GPIO_TYPE_INPUT = 0, + GPIO_TYPE_OUTPUT = 1, +}; + +struct gpio_of_entry { + int id; + struct gpio_of_helper_info *info; + struct device_node *node; + enum gpio_type type; + int gpio; + enum of_gpio_flags gpio_flags; + int irq; + const char *name; + atomic64_t counter; + unsigned int count_flags; +#define COUNT_RISING_EDGE (1 << 0) +#define COUNT_FALLING_EDGE (1 << 1) +}; + +struct gpio_of_helper_info { + struct platform_device *pdev; + struct idr idr; +}; + +static const struct of_device_id gpio_of_helper_of_match[] = { + { + .compatible = "gpio-of-helper", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, gpio_of_helper_of_match); + +static ssize_t gpio_of_helper_show_status(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + char *p, *e; + int id, n; + + p = buf; + e = p + PAGE_SIZE; + n = 0; + idr_for_each_entry(&info->idr, entry, id) { + switch (entry->type) { + case GPIO_TYPE_INPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s %llu\n", + entry->id, entry->name, entry->gpio, "IN", + (unsigned long long) + atomic64_read(&entry->counter)); + break; + case GPIO_TYPE_OUTPUT: + n = snprintf(p, e - p, "%2d %-24s %3d %-3s\n", + entry->id, entry->name, entry->gpio, "OUT"); + break; + } + p += n; + } + + return p - buf; +} + +static DEVICE_ATTR(status, S_IRUGO, + gpio_of_helper_show_status, NULL); + +static irqreturn_t gpio_of_helper_handler(int irq, void *ptr) +{ + struct gpio_of_entry *entry = ptr; + + /* caution - low speed interfaces only! */ + atomic64_inc(&entry->counter); + + return IRQ_HANDLED; +} + +static struct gpio_of_entry * +gpio_of_entry_create(struct gpio_of_helper_info *info, + struct device_node *node) +{ + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + struct gpio_of_entry *entry; + int err, gpio, irq; + unsigned int req_flags, count_flags, irq_flags; + enum gpio_type type; + enum of_gpio_flags gpio_flags; + const char *name; + + /* get the type of the node first */ + if (of_property_read_bool(node, "input")) + type = GPIO_TYPE_INPUT; + else if (of_property_read_bool(node, "output")) + type = GPIO_TYPE_OUTPUT; + else { + dev_err(dev, "Not valid gpio node type\n"); + err = -EINVAL; + goto err_bad_node; + } + + /* get the name */ + err = of_property_read_string(node, "gpio-name", &name); + if (err != 0) { + dev_err(dev, "Failed to get name property\n"); + goto err_bad_node; + } + + err = of_get_named_gpio_flags(node, "gpio", 0, &gpio_flags); + if (IS_ERR_VALUE(err)) { + dev_err(dev, "Failed to get gpio property of '%s'\n", name); + goto err_bad_node; + } + gpio = err; + + req_flags = 0; + count_flags = 0; + + /* set the request flags */ + switch (type) { + case GPIO_TYPE_INPUT: + req_flags = GPIOF_DIR_IN | GPIOF_EXPORT; + if (of_property_read_bool(node, "count-falling-edge")) + count_flags |= COUNT_FALLING_EDGE; + if (of_property_read_bool(node, "count-rising-edge")) + count_flags |= COUNT_RISING_EDGE; + break; + case GPIO_TYPE_OUTPUT: + req_flags = GPIOF_DIR_OUT | GPIOF_EXPORT; + if (of_property_read_bool(node, "init-high")) + req_flags |= GPIOF_OUT_INIT_HIGH; + else if (of_property_read_bool(node, "init-low")) + req_flags |= GPIOF_OUT_INIT_LOW; + break; + } + if (of_property_read_bool(node, "dir-changeable")) + req_flags |= GPIOF_EXPORT_CHANGEABLE; + + /* request the gpio */ + err = devm_gpio_request_one(dev, gpio, req_flags, name); + if (err != 0) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + irq = -1; + irq_flags = 0; + + /* counter mode requested - need an interrupt */ + if (count_flags != 0) { + irq = gpio_to_irq(gpio); + if (IS_ERR_VALUE(irq)) { + dev_err(dev, "Failed to request gpio '%s'\n", name); + goto err_bad_node; + } + + if (count_flags & COUNT_RISING_EDGE) + irq_flags |= IRQF_TRIGGER_RISING; + if (count_flags & COUNT_FALLING_EDGE) + irq_flags |= IRQF_TRIGGER_FALLING; + } + +// if (!idr_pre_get(&info->idr, GFP_KERNEL)) { +// dev_err(dev, "Failed on idr_pre_get of '%s'\n", name); +// err = -ENOMEM; +// goto err_no_mem; +// } + + idr_preload(GFP_KERNEL); + + entry = devm_kzalloc(dev, sizeof(*entry), GFP_KERNEL); + if (entry == NULL) { + dev_err(dev, "Failed to allocate gpio entry of '%s'\n", name); + err = -ENOMEM; + goto err_no_mem; + } + + entry->id = -1; + entry->info = info; + entry->node = of_node_get(node); /* get node reference */ + entry->type = type; + entry->gpio = gpio; + entry->gpio_flags = gpio_flags; + entry->irq = irq; + entry->name = name; + + /* interrupt enable is last thing done */ + if (irq >= 0) { + atomic64_set(&entry->counter, 0); + entry->count_flags = count_flags; + err = devm_request_irq(dev, irq, gpio_of_helper_handler, + irq_flags, name, entry); + if (err != 0) { + dev_err(dev, "Failed to request irq of '%s'\n", name); + goto err_no_irq; + } + } + + /* all done; insert */ +// err = idr_get_new(&info->idr, entry, &entry->id); +// if (IS_ERR_VALUE(err)) { +// dev_err(dev, "Failed to idr_get_new of '%s'\n", name); +// goto err_fail_idr; +// } + + err = idr_alloc(&info->idr, entry, 0, 0, GFP_NOWAIT); + if (err >= 0) + entry->id = err; + + idr_preload_end(); + + if (err < 0) { + dev_err(dev, "Failed to idr_get_new of '%s'\n", name); + goto err_fail_idr; + } + + dev_info(dev, "Allocated GPIO id=%d\n", entry->id); + + return entry; + +err_fail_idr: + /* nothing to do */ +err_no_irq: + /* release node ref */ + of_node_put(node); + /* nothing else needs to be done, devres handles it */ +err_no_mem: +err_bad_node: + return ERR_PTR(err); +} + +static int gpio_of_entry_destroy(struct gpio_of_entry *entry) +{ + struct gpio_of_helper_info *info = entry->info; + struct platform_device *pdev = info->pdev; + struct device *dev = &pdev->dev; + + dev_info(dev, "Destroying GPIO id=%d\n", entry->id); + + /* remove from the IDR */ + idr_remove(&info->idr, entry->id); + + /* remove node ref */ + of_node_put(entry->node); + + /* free gpio */ + devm_gpio_free(dev, entry->gpio); + + /* gree irq */ + if (entry->irq >= 0) + devm_free_irq(dev, entry->irq, entry); + + /* and free */ + devm_kfree(dev, entry); + + return 0; +} + +static int gpio_of_helper_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_of_helper_info *info; + struct gpio_of_entry *entry; + struct device_node *pnode = pdev->dev.of_node; + struct device_node *cnode; + struct pinctrl *pinctrl; + int err; + + /* we only support OF */ + if (pnode == NULL) { + dev_err(&pdev->dev, "No platform of_node!\n"); + return -ENODEV; + } + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + /* special handling for probe defer */ + if (PTR_ERR(pinctrl) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + } + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (info == NULL) { + dev_err(&pdev->dev, "Failed to allocate info\n"); + err = -ENOMEM; + goto err_no_mem; + } + platform_set_drvdata(pdev, info); + info->pdev = pdev; + + idr_init(&info->idr); + + err = device_create_file(dev, &dev_attr_status); + if (err != 0) { + dev_err(dev, "Failed to create status sysfs attribute\n"); + goto err_no_sysfs; + } + + for_each_child_of_node(pnode, cnode) { + + entry = gpio_of_entry_create(info, cnode); + if (IS_ERR_OR_NULL(entry)) { + dev_err(dev, "Failed to create gpio entry\n"); + err = PTR_ERR(entry); + goto err_fail_entry; + } + } + + dev_info(&pdev->dev, "ready\n"); + + return 0; +err_fail_entry: + device_remove_file(&pdev->dev, &dev_attr_status); +err_no_sysfs: +err_no_mem: + return err; +} + +static int gpio_of_helper_remove(struct platform_device *pdev) +{ + struct gpio_of_helper_info *info = platform_get_drvdata(pdev); + struct gpio_of_entry *entry; + int id; + + dev_info(&pdev->dev, "removing\n"); + + device_remove_file(&pdev->dev, &dev_attr_status); + + id = 0; + idr_for_each_entry(&info->idr, entry, id) { + /* destroy each and every one */ + gpio_of_entry_destroy(entry); + } + + return 0; +} + +#ifdef CONFIG_PM +//#ifdef CONFIG_PM_RUNTIME +static int gpio_of_helper_runtime_suspend(struct device *dev) +{ + /* place holder */ + return 0; +} + +static int gpio_of_helper_runtime_resume(struct device *dev) +{ + /* place holder */ + return 0; +} +//#endif /* CONFIG_PM_RUNTIME */ + +static struct dev_pm_ops gpio_of_helper_pm_ops = { + SET_RUNTIME_PM_OPS(gpio_of_helper_runtime_suspend, + gpio_of_helper_runtime_resume, NULL) +}; +#define GPIO_OF_HELPER_PM_OPS (&gpio_of_helper_pm_ops) +#else +#define GPIO_OF_HELPER_PM_OPS NULL +#endif /* CONFIG_PM */ + +struct platform_driver gpio_of_helper_driver = { + .probe = gpio_of_helper_probe, + .remove = gpio_of_helper_remove, + .driver = { + .name = "gpio-of-helper", + .owner = THIS_MODULE, + .pm = GPIO_OF_HELPER_PM_OPS, + .of_match_table = gpio_of_helper_of_match, + }, +}; + +module_platform_driver(gpio_of_helper_driver); + +MODULE_AUTHOR("Pantelis Antoniou "); +MODULE_DESCRIPTION("GPIO OF Helper driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-of-helper"); diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c index 5c1aca443e54f..6ad22d7108854 100644 --- a/drivers/gpu/drm/drm_fb_cma_helper.c +++ b/drivers/gpu/drm/drm_fb_cma_helper.c @@ -25,6 +25,12 @@ #include #include +/* + * number of buffers to allocate from CMA pool, often increased for + * double/triple buffering + */ +#define DRM_NUM_FBDEV_BUFFERS 3 + struct drm_fb_cma { struct drm_framebuffer fb; struct drm_gem_cma_object *obj[4]; @@ -265,7 +271,7 @@ static int drm_fbdev_cma_create(struct drm_fb_helper *helper, bytes_per_pixel = DIV_ROUND_UP(sizes->surface_bpp, 8); mode_cmd.width = sizes->surface_width; - mode_cmd.height = sizes->surface_height; + mode_cmd.height = sizes->surface_height * DRM_NUM_FBDEV_BUFFERS; mode_cmd.pitches[0] = sizes->surface_width * bytes_per_pixel; mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp, sizes->surface_depth); @@ -304,7 +310,7 @@ static int drm_fbdev_cma_create(struct drm_fb_helper *helper, } drm_fb_helper_fill_fix(fbi, fb->pitches[0], fb->depth); - drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->fb_height); + drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->surface_height); offset = fbi->var.xoffset * bytes_per_pixel; offset += fbi->var.yoffset * fb->pitches[0]; diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c index 51e9de9cbecfb..3d90055579062 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c @@ -40,6 +40,10 @@ struct tilcdc_crtc { /* for deferred fb unref's: */ struct drm_flip_work unref_work; }; + +static vsync_callback_t vsync_cb_handler; +static void *vsync_cb_arg; + #define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base) static void unref_worker(struct drm_flip_work *work, void *val) @@ -623,6 +627,32 @@ void tilcdc_crtc_update_clk(struct drm_crtc *crtc) pm_runtime_put_sync(dev->dev); } +int register_vsync_cb(vsync_callback_t handler, void *arg, int idx) +{ + if ((vsync_cb_handler == NULL) && (vsync_cb_arg == NULL)) { + vsync_cb_arg = arg; + vsync_cb_handler = handler; + } else { + return -EEXIST; + } + + return 0; +} +EXPORT_SYMBOL(register_vsync_cb); + +int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx) +{ + if ((vsync_cb_handler == handler) && (vsync_cb_arg == arg)) { + vsync_cb_handler = NULL; + vsync_cb_arg = NULL; + } else { + return -ENXIO; + } + + return 0; +} +EXPORT_SYMBOL(unregister_vsync_cb); + irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) { struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); @@ -668,6 +698,10 @@ irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) tilcdc_crtc->event = NULL; if (event) drm_send_vblank_event(dev, 0, event); + + if (vsync_cb_handler) + vsync_cb_handler(vsync_cb_arg); + spin_unlock_irqrestore(&dev->event_lock, flags); } diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h index 9edf3006cd0a5..7301509061a1c 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h @@ -170,4 +170,9 @@ int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode) int tilcdc_crtc_max_width(struct drm_crtc *crtc); void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode); +/* used by SGX OMAPLFB drvier */ +typedef void (*vsync_callback_t)(void *arg); +int register_vsync_cb(vsync_callback_t handler, void *arg, int idx); +int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx); + #endif /* __TILCDC_DRV_H__ */ diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 987c124432c50..3aba34ac724d7 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1003,6 +1003,8 @@ EXPORT_SYMBOL_GPL(i2c_new_device); */ void i2c_unregister_device(struct i2c_client *client) { + if (client->dev.of_node) + of_node_clear_flag(client->dev.of_node, OF_POPULATED); device_unregister(&client->dev); } EXPORT_SYMBOL_GPL(i2c_unregister_device); @@ -1311,8 +1313,11 @@ static void of_i2c_register_devices(struct i2c_adapter *adap) dev_dbg(&adap->dev, "of_i2c: walking child nodes\n"); - for_each_available_child_of_node(adap->dev.of_node, node) + for_each_available_child_of_node(adap->dev.of_node, node) { + if (of_node_test_and_set_flag(node, OF_POPULATED)) + continue; of_i2c_register_device(adap, node); + } } static int of_dev_node_match(struct device *dev, void *data) @@ -1844,6 +1849,11 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action, if (adap == NULL) return NOTIFY_OK; /* not for us */ + if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) { + put_device(&adap->dev); + return NOTIFY_OK; + } + client = of_i2c_register_device(adap, rd->dn); put_device(&adap->dev); @@ -1854,6 +1864,10 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action, } break; case OF_RECONFIG_CHANGE_REMOVE: + /* already depopulated? */ + if (!of_node_check_flag(rd->dn, OF_POPULATED)) + return NOTIFY_OK; + /* find our device by node */ client = of_find_i2c_device_by_node(rd->dn); if (client == NULL) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 006242c8bca0f..76705c4a63136 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -515,6 +515,36 @@ config VEXPRESS_SYSCFG bus. System Configuration interface is one of the possible means of generating transactions on this bus. +config BONE_CAPEMGR + tristate "Beaglebone cape manager" + depends on ARCH_OMAP2PLUS && OF + select EEPROM + select OF_OVERLAY + default n + help + Say Y here to include support for automatic loading of + beaglebone capes. + +config DEV_OVERLAYMGR + tristate "Device overlay manager" + depends on OF + select OF_OVERLAY + default n + help + Say Y here to include support for the automagical dev + overlay manager. + +config TIEQEP + tristate "EQEP Hardware quadrature encoder controller" + depends on SOC_AM33XX + select PWM_TIPWMSS + help + Driver support for the EQEP quadrature encoder controller AM33XX + TI SOC + + To compile this driver as a module, choose M here: the module + will be called tieqep. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" @@ -525,7 +555,9 @@ source "drivers/misc/altera-stapl/Kconfig" source "drivers/misc/mei/Kconfig" source "drivers/misc/vmw_vmci/Kconfig" source "drivers/misc/mic/Kconfig" +source "drivers/misc/cape_bone_argus/Kconfig" source "drivers/misc/genwqe/Kconfig" +source "drivers/misc/cape/Kconfig" source "drivers/misc/echo/Kconfig" source "drivers/misc/cxl/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7d5c4cd118c44..b334785c67fbf 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -52,7 +52,12 @@ obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o obj-$(CONFIG_SRAM) += sram.o obj-y += mic/ +obj-y += cape_bone_argus/ obj-$(CONFIG_GENWQE) += genwqe/ +obj-y += cape/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ +obj-$(CONFIG_TIEQEP) += tieqep.o +obj-$(CONFIG_BONE_CAPEMGR) += bone_capemgr.o +obj-$(CONFIG_DEV_OVERLAYMGR) += devovmgr.o diff --git a/drivers/misc/bone_capemgr.c b/drivers/misc/bone_capemgr.c new file mode 100644 index 0000000000000..7c4f5b0e74fdc --- /dev/null +++ b/drivers/misc/bone_capemgr.c @@ -0,0 +1,1884 @@ +/* + * TI Beaglebone cape manager + * + * Copyright (C) 2012 Texas Instruments Inc. + * Copyright (C) 2012-2015 Konsulko Group. + * Author: Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* disabled capes */ +static char *disable_partno; +module_param(disable_partno, charp, 0444); +MODULE_PARM_DESC(disable_partno, + "Comma delimited list of PART-NUMBER[:REV] of disabled capes"); + +/* enable capes */ +static char *enable_partno; +module_param(enable_partno, charp, 0444); +MODULE_PARM_DESC(enable_partno, + "Comma delimited list of PART-NUMBER[:REV] of enabled capes"); + +/* delay to scan on boot until rootfs appears */ +static int boot_scan_period = 1000; +module_param(boot_scan_period, int, 0444); +MODULE_PARM_DESC(boot_scan_period, + "boot scan period until rootfs firmware is available"); + +struct capemgr_info; + +struct slot_ee_attribute { + struct device_attribute devattr; + unsigned int field; + struct bone_cape_slot *slot; /* this is filled when instantiated */ +}; +#define to_slot_ee_attribute(x) \ + container_of((x), struct slot_ee_attribute, devattr) + +struct bbrd_ee_attribute { + struct device_attribute devattr; + unsigned int field; +}; +#define to_bbrd_ee_attribute(x) \ + container_of((x), struct bbrd_ee_attribute, devattr) + +struct bone_cape_slot { + struct list_head node; + struct capemgr_info *info; + int slotno; + struct nvmem_cell *nvmem_cell; + + char text_id[256]; + char signature[256]; + /* quick access */ + char board_name[32+1]; + char version[4+1]; + char manufacturer[16+1]; + char part_number[16+1]; + + /* attribute group */ + char *ee_attr_name; + int ee_attrs_count; + struct slot_ee_attribute *ee_attrs; + struct attribute **ee_attrs_tab; + struct attribute_group attrgroup; + + /* state flags */ + unsigned int probed : 1; + unsigned int probe_failed : 1; + unsigned int override : 1; + unsigned int loading : 1; + unsigned int loaded : 1; + unsigned int retry_loading : 1; + unsigned int disabled : 1; + + char *dtbo; + const struct firmware *fw; + struct device_node *overlay; + int overlay_id; + + /* loader thread */ + struct task_struct *loader_thread; + + /* load priority */ + int priority; +}; + +struct bone_baseboard { + + /* from the matched boardmap node */ + char *compatible_name; + + /* filled in by reading the eeprom */ + char signature[256]; + char text_id[64+1]; + + /* quick access */ + char board_name[8+1]; + char revision[4+1]; + char serial_number[12+1]; + + /* access to the eeprom */ + struct nvmem_cell *nvmem_cell; +}; + +struct capemgr_info { + struct platform_device *pdev; + + atomic_t next_slot_nr; + struct list_head slot_list; + struct mutex slots_list_mutex; + + /* baseboard EEPROM data */ + struct bone_baseboard baseboard; + + /* wait queue for keeping the priorities straight */ + wait_queue_head_t load_wq; +}; + +static int bone_slot_fill_override(struct bone_cape_slot *slot, + const char *part_number, const char *version); +static struct bone_cape_slot *capemgr_add_slot( + struct capemgr_info *info, const char *slot_name, + const char *part_number, const char *version, int prio); +static int capemgr_remove_slot_no_lock(struct bone_cape_slot *slot); +static int capemgr_remove_slot(struct bone_cape_slot *slot); +static int capemgr_load_slot(struct bone_cape_slot *slot); +static int capemgr_unload_slot(struct bone_cape_slot *slot); + +/* baseboard EEPROM field definition */ +#define BBRD_EE_FIELD_HEADER 0 +#define BBRD_EE_FIELD_BOARD_NAME 1 +#define BBRD_EE_FIELD_REVISION 2 +#define BBRD_EE_FIELD_SERIAL_NUMBER 3 +#define BBRD_EE_FIELD_CONFIG_OPTION 4 +#define BBRD_EE_FILED_RSVD1 5 +#define BBRD_EE_FILED_RSVD2 6 +#define BBRD_EE_FILED_RSVD3 7 + +/* cape EEPROM field definitions */ +#define CAPE_EE_FIELD_HEADER 0 +#define CAPE_EE_FIELD_EEPROM_REV 1 +#define CAPE_EE_FIELD_BOARD_NAME 2 +#define CAPE_EE_FIELD_VERSION 3 +#define CAPE_EE_FIELD_MANUFACTURER 4 +#define CAPE_EE_FIELD_PART_NUMBER 5 +#define CAPE_EE_FIELD_NUMBER_OF_PINS 6 +#define CAPE_EE_FIELD_SERIAL_NUMBER 7 +#define CAPE_EE_FIELD_PIN_USAGE 8 +#define CAPE_EE_FIELD_VDD_3V3EXP 9 +#define CAPE_EE_FIELD_VDD_5V 10 +#define CAPE_EE_FIELD_SYS_5V 11 +#define CAPE_EE_FIELD_DC_SUPPLIED 12 +#define CAPE_EE_FIELD_FIELDS_NR 13 + +#define EE_FIELD_MAKE_HEADER(p) \ + ({ \ + const u8 *_p = (p); \ + (((u32)_p[0] << 24) | ((u32)_p[1] << 16) | \ + ((u32)_p[2] << 8) | (u32)_p[3]); \ + }) + +#define EE_FIELD_HEADER_VALID 0xaa5533ee + +struct ee_field { + const char *name; + int start; + int size; + unsigned int ascii : 1; + unsigned int strip_trailing_dots : 1; + const char *override; +}; + +/* baseboard EEPROM definitions */ +static const struct ee_field bbrd_sig_fields[] = { + [BBRD_EE_FIELD_HEADER] = { + .name = "header", + .start = 0, + .size = 4, + .ascii = 0, + .override = "\xaa\x55\x33\xee", /* AA 55 33 EE */ + }, + [BBRD_EE_FIELD_BOARD_NAME] = { + .name = "board-name", + .start = 4, + .size = 8, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Board Name", + }, + [BBRD_EE_FIELD_REVISION] = { + .name = "revision", + .start = 12, + .size = 4, + .ascii = 1, + .override = "00A0", + }, + [BBRD_EE_FIELD_SERIAL_NUMBER] = { + .name = "serial-number", + .start = 16, + .size = 12, + .ascii = 1, + .override = "0000000000", + }, + [BBRD_EE_FIELD_CONFIG_OPTION] = { + .name = "config-option", + .start = 28, + .size = 32, + }, +}; + +/* cape EEPROM definitions */ +static const struct ee_field cape_sig_fields[] = { + [CAPE_EE_FIELD_HEADER] = { + .name = "header", + .start = 0, + .size = 4, + .ascii = 0, + .override = "\xaa\x55\x33\xee", /* AA 55 33 EE */ + }, + [CAPE_EE_FIELD_EEPROM_REV] = { + .name = "eeprom-format-revision", + .start = 4, + .size = 2, + .ascii = 1, + .override = "A0", + }, + [CAPE_EE_FIELD_BOARD_NAME] = { + .name = "board-name", + .start = 6, + .size = 32, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Override Board Name", + }, + [CAPE_EE_FIELD_VERSION] = { + .name = "version", + .start = 38, + .size = 4, + .ascii = 1, + .override = "00A0", + }, + [CAPE_EE_FIELD_MANUFACTURER] = { + .name = "manufacturer", + .start = 42, + .size = 16, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Override Manuf", + }, + [CAPE_EE_FIELD_PART_NUMBER] = { + .name = "part-number", + .start = 58, + .size = 16, + .ascii = 1, + .strip_trailing_dots = 1, + .override = "Override Part#", + }, + [CAPE_EE_FIELD_NUMBER_OF_PINS] = { + .name = "number-of-pins", + .start = 74, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_SERIAL_NUMBER] = { + .name = "serial-number", + .start = 76, + .size = 12, + .ascii = 1, + .override = "0000000000", + }, + [CAPE_EE_FIELD_PIN_USAGE] = { + .name = "pin-usage", + .start = 88, + .size = 140, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_VDD_3V3EXP] = { + .name = "vdd-3v3exp", + .start = 228, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_VDD_5V] = { + .name = "vdd-5v", + .start = 230, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_SYS_5V] = { + .name = "sys-5v", + .start = 232, + .size = 2, + .ascii = 0, + .override = NULL, + }, + [CAPE_EE_FIELD_DC_SUPPLIED] = { + .name = "dc-supplied", + .start = 234, + .size = 2, + .ascii = 0, + .override = NULL, + }, +}; + +static char *ee_field_get(const struct ee_field *sig_field, + const void *data, int field, char *buf, int bufsz) +{ + int len; + + /* enough space? */ + if (bufsz < sig_field->size + sig_field->ascii) + return NULL; + + memcpy(buf, (char *)data + sig_field->start, sig_field->size); + + /* terminate ascii field */ + if (sig_field->ascii) + buf[sig_field->size] = '\0'; + + if (sig_field->strip_trailing_dots) { + len = strlen(buf); + while (len > 1 && buf[len - 1] == '.') + buf[--len] = '\0'; + } + + return buf; +} + +char *bbrd_ee_field_get(const void *data, + int field, char *buf, int bufsz) +{ + if ((unsigned int)field >= ARRAY_SIZE(bbrd_sig_fields)) + return NULL; + + return ee_field_get(&bbrd_sig_fields[field], data, field, buf, bufsz); +} + +char *cape_ee_field_get(const void *data, + int field, char *buf, int bufsz) +{ + if ((unsigned int)field >= ARRAY_SIZE(cape_sig_fields)) + return NULL; + + return ee_field_get(&cape_sig_fields[field], data, field, buf, bufsz); +} + +#ifdef CONFIG_OF +static const struct of_device_id capemgr_of_match[] = { + { + .compatible = "ti,bone-capemgr", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, capemgr_of_match); + +#endif + +static int bone_baseboard_scan(struct bone_baseboard *bbrd) +{ + struct capemgr_info *info = container_of(bbrd, + struct capemgr_info, baseboard); + const u8 *p; + int ret; + size_t len; + + p = nvmem_cell_read(bbrd->nvmem_cell, &len); + if (IS_ERR(p)) { + ret = PTR_ERR(p); + dev_err(&info->pdev->dev, + "Cannot read cell (ret=%d)\n", ret); + return ret; + } + if (len < sizeof(bbrd->signature)) { + dev_info(&info->pdev->dev, + "Short read %d (should be >= %d bytes)\n", + len, sizeof(bbrd->signature)); + return -EINVAL; + } + memcpy(bbrd->signature, p, sizeof(bbrd->signature)); + + p = bbrd->signature; + if (EE_FIELD_MAKE_HEADER(p) != EE_FIELD_HEADER_VALID) { + dev_err(&info->pdev->dev, "Invalid board signature '%08x'\n", + EE_FIELD_MAKE_HEADER(p)); + return -ENODEV; + } + + bbrd_ee_field_get(bbrd->signature, + BBRD_EE_FIELD_BOARD_NAME, + bbrd->board_name, sizeof(bbrd->board_name)); + bbrd_ee_field_get(bbrd->signature, + BBRD_EE_FIELD_REVISION, + bbrd->revision, sizeof(bbrd->revision)); + bbrd_ee_field_get(bbrd->signature, + BBRD_EE_FIELD_SERIAL_NUMBER, + bbrd->serial_number, sizeof(bbrd->serial_number)); + + /* board_name,version,manufacturer,part_number */ + snprintf(bbrd->text_id, sizeof(bbrd->text_id) - 1, + "%s,%s,%s", bbrd->board_name, bbrd->revision, + bbrd->serial_number); + + /* terminate always */ + bbrd->text_id[sizeof(bbrd->text_id) - 1] = '\0'; + + return 0; +} + +static int bone_slot_scan(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + const u8 *p; + int r; + ssize_t len; + + /* need to read EEPROM? */ + if (slot->probed) + goto slot_fail_check; + + slot->probed = 1; + + if (!slot->override) { + + p = nvmem_cell_read(slot->nvmem_cell, &len); + if (IS_ERR(p)) { + r = PTR_ERR(p); + slot->probe_failed = 1; + + /* timeout is normal when no cape is present */ + if (r != -ETIMEDOUT) + dev_err(&info->pdev->dev, + "Cannot read cell (ret=%d)\n", r); + return r; + } + if (len < sizeof(slot->signature)) { + dev_info(&info->pdev->dev, + "Short read %d (should be >= %d bytes)\n", + len, sizeof(slot->signature)); + return -EINVAL; + } + memcpy(slot->signature, p, sizeof(slot->signature)); + + } else + dev_info(&info->pdev->dev, + "Using override eeprom data at slot %d\n", + slot->slotno); + + p = slot->signature; + if (EE_FIELD_MAKE_HEADER(p) != EE_FIELD_HEADER_VALID) { + dev_err(&info->pdev->dev, + "Invalid signature '%08x' at slot %d\n", + EE_FIELD_MAKE_HEADER(p), slot->slotno); + slot->probe_failed = 1; + return -ENODEV; + } + + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_BOARD_NAME, + slot->board_name, sizeof(slot->board_name)); + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_VERSION, + slot->version, sizeof(slot->version)); + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_MANUFACTURER, + slot->manufacturer, sizeof(slot->manufacturer)); + cape_ee_field_get(slot->signature, + CAPE_EE_FIELD_PART_NUMBER, + slot->part_number, sizeof(slot->part_number)); + + /* board_name,version,manufacturer,part_number */ + snprintf(slot->text_id, sizeof(slot->text_id) - 1, + "%s,%s,%s,%s", slot->board_name, slot->version, + slot->manufacturer, slot->part_number); + + /* terminate always */ + slot->text_id[sizeof(slot->text_id) - 1] = '\0'; + +slot_fail_check: + /* slot has failed and we don't support hotpluging */ + if (slot->probe_failed) + return -ENODEV; + + return 0; +} + +/* return 0 if not matched,, 1 if matched */ +static int bone_match_cape(const char *match, + const char *part_number, const char *version) +{ + char *tmp_part_number, *tmp_version; + char *buf, *s, *e, *sn; + int found; + + if (match == NULL || part_number == NULL) + return 0; + + /* copy the argument to work on it */ + buf = kstrdup(match, GFP_KERNEL); + + /* no memory, too bad... */ + if (buf == NULL) + return 0; + + found = 0; + s = buf; + e = s + strlen(s); + while (s < e) { + /* find comma separator */ + sn = strchr(s, ','); + if (sn != NULL) + *sn++ = '\0'; + else + sn = e; + tmp_part_number = s; + tmp_version = strchr(tmp_part_number, ':'); + if (tmp_version != NULL) + *tmp_version++ = '\0'; + s = sn; + + /* the part names must match */ + if (strcmp(tmp_part_number, part_number) != 0) + continue; + + /* if there's no version, match any */ + if (version == NULL || tmp_version == NULL || + strcmp(version, tmp_version) == 0) { + found = 1; + break; + } + } + + kfree(buf); + + return found; +} + +/* helper method */ +static int of_multi_prop_cmp(const struct property *prop, const char *value) +{ + const char *cp; + int cplen, vlen, l; + + /* check if it's directly compatible */ + cp = prop->value; + cplen = prop->length; + vlen = strlen(value); + + while (cplen > 0) { + /* compatible? */ + if (of_compat_cmp(cp, value, vlen) == 0) + return 0; + l = strlen(cp) + 1; + cp += l; + cplen -= l; + } + return -1; +} + +static ssize_t slot_ee_attr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct slot_ee_attribute *ee_attr = to_slot_ee_attribute(attr); + struct bone_cape_slot *slot = ee_attr->slot; + const struct ee_field *sig_field; + int i, len; + char *p, *s; + u16 val; + + /* add newline for ascii fields */ + sig_field = &cape_sig_fields[ee_attr->field]; + + len = sig_field->size + sig_field->ascii; + p = kmalloc(len, GFP_KERNEL); + if (p == NULL) + return -ENOMEM; + + s = cape_ee_field_get(slot->signature, ee_attr->field, p, len); + if (s == NULL) + return -EINVAL; + + /* add newline for ascii fields and return */ + if (sig_field->ascii) { + len = sprintf(buf, "%s\n", s); + goto out; + } + + /* case by case handling */ + switch (ee_attr->field) { + case CAPE_EE_FIELD_HEADER: + len = sprintf(buf, "%02x %02x %02x %02x\n", + s[0], s[1], s[2], s[3]); + break; + + /* 2 bytes */ + case CAPE_EE_FIELD_NUMBER_OF_PINS: + case CAPE_EE_FIELD_VDD_3V3EXP: + case CAPE_EE_FIELD_VDD_5V: + case CAPE_EE_FIELD_SYS_5V: + case CAPE_EE_FIELD_DC_SUPPLIED: + /* the bone is LE */ + val = s[0] & (s[1] << 8); + len = sprintf(buf, "%u\n", (unsigned int)val & 0xffff); + break; + + case CAPE_EE_FIELD_PIN_USAGE: + + len = 0; + for (i = 0; i < sig_field->size / 2; i++) { + /* the bone is LE */ + val = s[0] & (s[1] << 8); + sprintf(buf, "%04x\n", val); + buf += 5; + len += 5; + s += 2; + } + + break; + + default: + *buf = '\0'; + len = 0; + break; + } + +out: + kfree(p); + + return len; +} + +#define SLOT_EE_ATTR(_name, _field) \ + { \ + .devattr = __ATTR(_name, S_IRUGO, slot_ee_attr_show, NULL), \ + .field = CAPE_EE_FIELD_##_field, \ + .slot = NULL, \ + } + +static const struct slot_ee_attribute slot_ee_attrs[] = { + SLOT_EE_ATTR(header, HEADER), + SLOT_EE_ATTR(eeprom-format-revision, EEPROM_REV), + SLOT_EE_ATTR(board-name, BOARD_NAME), + SLOT_EE_ATTR(version, VERSION), + SLOT_EE_ATTR(manufacturer, MANUFACTURER), + SLOT_EE_ATTR(part-number, PART_NUMBER), + SLOT_EE_ATTR(number-of-pins, NUMBER_OF_PINS), + SLOT_EE_ATTR(serial-number, SERIAL_NUMBER), + SLOT_EE_ATTR(pin-usage, PIN_USAGE), + SLOT_EE_ATTR(vdd-3v3exp, VDD_3V3EXP), + SLOT_EE_ATTR(vdd-5v, VDD_5V), + SLOT_EE_ATTR(sys-5v, SYS_5V), + SLOT_EE_ATTR(dc-supplied, DC_SUPPLIED), +}; + +static int bone_cape_slot_sysfs_register(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + struct slot_ee_attribute *ee_attr; + struct attribute_group *attrgroup; + int i, err, sz; + + slot->ee_attr_name = kasprintf(GFP_KERNEL, "slot-%d", slot->slotno); + if (slot->ee_attr_name == NULL) { + dev_err(dev, "slot #%d: Failed to allocate ee_attr_name\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attr_name; + } + + slot->ee_attrs_count = ARRAY_SIZE(slot_ee_attrs); + + sz = slot->ee_attrs_count * sizeof(*slot->ee_attrs); + slot->ee_attrs = kmalloc(sz, GFP_KERNEL); + if (slot->ee_attrs == NULL) { + dev_err(dev, "slot #%d: Failed to allocate ee_attrs\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attrs; + } + + attrgroup = &slot->attrgroup; + memset(attrgroup, 0, sizeof(*attrgroup)); + attrgroup->name = slot->ee_attr_name; + + sz = sizeof(*slot->ee_attrs_tab) * (slot->ee_attrs_count + 1); + attrgroup->attrs = kmalloc(sz, GFP_KERNEL); + if (attrgroup->attrs == NULL) { + dev_err(dev, "slot #%d: Failed to allocate ee_attrs_tab\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attrs_tab; + } + /* copy everything over */ + memcpy(slot->ee_attrs, slot_ee_attrs, sizeof(slot_ee_attrs)); + + /* bind this attr to the slot */ + for (i = 0; i < slot->ee_attrs_count; i++) { + ee_attr = &slot->ee_attrs[i]; + ee_attr->slot = slot; + attrgroup->attrs[i] = &ee_attr->devattr.attr; + } + attrgroup->attrs[i] = NULL; + + /* make lockdep happy */ + for (i = 0; i < slot->ee_attrs_count; i++) { + ee_attr = &slot->ee_attrs[i]; + sysfs_attr_init(&ee_attr->devattr.attr); + } + + err = sysfs_create_group(&dev->kobj, attrgroup); + if (err != 0) { + dev_err(dev, "slot #%d: Failed to allocate ee_attrs_tab\n", + slot->slotno); + err = -ENOMEM; + goto err_fail_no_ee_attrs_group; + } + + return 0; + +err_fail_no_ee_attrs_group: + kfree(slot->ee_attrs_tab); +err_fail_no_ee_attrs_tab: + kfree(slot->ee_attrs); +err_fail_no_ee_attrs: + kfree(slot->ee_attr_name); +err_fail_no_ee_attr_name: + return err; +} + +static void bone_cape_slot_sysfs_unregister(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + + sysfs_remove_group(&dev->kobj, &slot->attrgroup); + kfree(slot->ee_attrs_tab); + kfree(slot->ee_attrs); + kfree(slot->ee_attr_name); +} + +static ssize_t bbrd_ee_attr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct bbrd_ee_attribute *ee_attr = to_bbrd_ee_attribute(attr); + struct platform_device *pdev = to_platform_device(dev); + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_baseboard *bbrd = &info->baseboard; + const struct ee_field *sig_field; + u16 val; + int i, len; + char *p, *s; + + /* add newline for ascii fields */ + sig_field = &bbrd_sig_fields[ee_attr->field]; + + len = sig_field->size + sig_field->ascii; + p = kmalloc(len, GFP_KERNEL); + if (p == NULL) + return -ENOMEM; + + s = bbrd_ee_field_get(bbrd->signature, ee_attr->field, p, len); + if (s == NULL) + return -EINVAL; + + /* add newline for ascii fields and return */ + if (sig_field->ascii) { + len = sprintf(buf, "%s\n", s); + goto out; + } + + /* case by case handling */ + switch (ee_attr->field) { + case BBRD_EE_FIELD_HEADER: + len = sprintf(buf, "%02x %02x %02x %02x\n", + s[0], s[1], s[2], s[3]); + break; + + case BBRD_EE_FIELD_CONFIG_OPTION: + len = 0; + for (i = 0; i < sig_field->size / 2; i++) { + /* the bone is LE */ + val = s[0] & (s[1] << 8); + sprintf(buf, "%04x\n", val); + buf += 5; + len += 5; + s += 2; + } + break; + + default: + *buf = '\0'; + len = 0; + break; + } + +out: + kfree(p); + + return len; +} + +#define BBRD_EE_ATTR(_name, _field) \ + { \ + .devattr = __ATTR(_name, 0440, bbrd_ee_attr_show, NULL), \ + .field = BBRD_EE_FIELD_##_field, \ + } + +static struct bbrd_ee_attribute bbrd_ee_attrs[] = { + BBRD_EE_ATTR(header, HEADER), + BBRD_EE_ATTR(board-name, BOARD_NAME), + BBRD_EE_ATTR(revision, REVISION), + BBRD_EE_ATTR(serial-number, SERIAL_NUMBER), + BBRD_EE_ATTR(config-option, CONFIG_OPTION), +}; + +static struct attribute *bbrd_attrs_flat[] = { + &bbrd_ee_attrs[BBRD_EE_FIELD_HEADER].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_BOARD_NAME].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_REVISION].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_SERIAL_NUMBER].devattr.attr, + &bbrd_ee_attrs[BBRD_EE_FIELD_CONFIG_OPTION].devattr.attr, + NULL, +}; + +static const struct attribute_group bbrd_attr_group = { + .name = "baseboard", + .attrs = bbrd_attrs_flat, +}; + +static ssize_t slots_show(struct device *dev, struct device_attribute *attr, + char *buf); +static ssize_t slots_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); + +static DEVICE_ATTR(slots, 0644, slots_show, slots_store); + +static struct attribute *root_attrs_flat[] = { + &dev_attr_slots.attr, + NULL, +}; + +static const struct attribute_group root_attr_group = { + .attrs = root_attrs_flat, +}; + +static const struct attribute_group *attr_groups[] = { + &root_attr_group, + &bbrd_attr_group, + NULL, +}; + +static ssize_t slots_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_cape_slot *slot; + ssize_t len, sz; + + mutex_lock(&info->slots_list_mutex); + sz = 0; + list_for_each_entry(slot, &info->slot_list, node) { + + len = sprintf(buf, "%2d: %c%c%c%c%c%c %3d %s\n", + slot->slotno, + slot->probed ? 'P' : '-', + slot->probe_failed ? 'F' : '-', + slot->override ? 'O' : '-', + slot->loading ? 'l' : '-', + slot->loaded ? 'L' : '-', + slot->disabled ? 'D' : '-', + slot->overlay_id, slot->text_id); + + buf += len; + sz += len; + } + mutex_unlock(&info->slots_list_mutex); + + return sz; +} + +static ssize_t slots_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_cape_slot *slot; + struct device_node *pnode, *node; + char *s, *part_number, *version; + int ret; + int slotno; + + /* check for remove slot */ + if (strlen(buf) > 0 && buf[0] == '-') { + ret = kstrtoint(buf + 1, 10, &slotno); + if (ret != 0) + return ret; + + /* now load each (take lock to be sure */ + mutex_lock(&info->slots_list_mutex); + list_for_each_entry(slot, &info->slot_list, node) { + if (slotno == slot->slotno) + goto found; + } + + mutex_unlock(&info->slots_list_mutex); + return -ENODEV; +found: + /* the hardware slots just get unloaded */ + if (!slot->override) { + ret = capemgr_unload_slot(slot); + if (ret == 0) + dev_info(&pdev->dev, + "Unloaded slot #%d\n", slotno); + else + dev_err(&pdev->dev, + "Failed to unload slot #%d\n", slotno); + } else { + ret = capemgr_remove_slot_no_lock(slot); + if (ret == 0) + dev_info(&pdev->dev, + "Removed slot #%d\n", slotno); + else + dev_err(&pdev->dev, + "Failed to remove slot #%d\n", slotno); + } + mutex_unlock(&info->slots_list_mutex); + + return ret == 0 ? strlen(buf) : ret; + } + + part_number = kstrdup(buf, GFP_KERNEL); + if (part_number == NULL) + return -ENOMEM; + + /* remove trailing spaces dots and newlines */ + s = part_number + strlen(part_number); + while (s > part_number && + (isspace(s[-1]) || s[-1] == '\n' || s[-1] == '.')) + *--s = '\0'; + + version = strchr(part_number, ':'); + if (version != NULL) + *version++ = '\0'; + + dev_info(&pdev->dev, "part_number '%s', version '%s'\n", + part_number, version ? version : "N/A"); + + pnode = pdev->dev.of_node; + node = NULL; + slot = NULL; + ret = 0; + + /* no specific slot found, try immediate */ + slot = capemgr_add_slot(info, NULL, part_number, version, 0); + + if (IS_ERR_OR_NULL(slot)) { + dev_err(&pdev->dev, "Failed to add slot #%d\n", + atomic_read(&info->next_slot_nr) - 1); + ret = slot ? PTR_ERR(slot) : -ENODEV; + slot = NULL; + goto err_fail; + } + + kfree(part_number); + + ret = capemgr_load_slot(slot); + if (ret != 0) + capemgr_remove_slot(slot); + + return ret == 0 ? strlen(buf) : ret; +err_fail: + of_node_put(node); + kfree(part_number); + return ret; +} + +/* verify the overlay */ +static int capemgr_verify_overlay(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + struct bone_baseboard *bbrd = &info->baseboard; + struct device_node *node = slot->overlay; + struct property *prop; + struct bone_cape_slot *slotn; + int err, counta, countb, i, j; + const char *ra, *rb; + + /* validate */ + if (node == NULL) { + dev_err(dev, "slot #%d: No overlay for '%s'\n", + slot->slotno, slot->part_number); + return -EINVAL; + } + + /* check if the slot is compatible with the board */ + prop = of_find_property(node, "compatible", NULL); + + /* no compatible property? */ + if (prop == NULL) { + dev_err(dev, "slot #%d: No compatible property for '%s'\n", + slot->slotno, slot->part_number); + return -EINVAL; + } + + /* verify that the cape is baseboard compatible */ + if (of_multi_prop_cmp(prop, bbrd->compatible_name) != 0) { + dev_err(dev, "slot #%d: Incompatible with baseboard for '%s'\n", + slot->slotno, slot->part_number); + return -EINVAL; + } + + /* count the strings */ + counta = of_property_count_strings(node, "exclusive-use"); + /* no valid property, or no resources; no matter, it's OK */ + if (counta <= 0) + return 0; + + /* and now check if there's a resource conflict */ + err = 0; + mutex_lock(&info->slots_list_mutex); + for (i = 0; i < counta; i++) { + + ra = NULL; + err = of_property_read_string_index(node, "exclusive-use", + i, &ra); + if (err != 0) { + dev_err(dev, "slot #%d: Could not read string #%d\n", + slot->slotno, i); + break; + } + + list_for_each_entry(slotn, &info->slot_list, node) { + + /* don't check against self */ + if (slot == slotn) + continue; + + /* only check against loaded or loading slots */ + if (!slotn->loaded && !slotn->loading) + continue; + + countb = of_property_count_strings(slotn->overlay, + "exclusive-use"); + /* no valid property, or resources; it's OK */ + if (countb <= 0) + continue; + + + for (j = 0; j < countb; j++) { + + /* count the resources */ + rb = NULL; + err = of_property_read_string_index( + slotn->overlay, "exclusive-use", + j, &rb); + if (err != 0) { + /* error, but we don't care */ + err = 0; + break; + } + + /* ignore case; just in case ;) */ + if (strcasecmp(ra, rb) == 0) { + + /* resource conflict */ + err = -EEXIST; + dev_err(dev, + "slot #%d: %s conflict %s (#%d:%s)\n", + slot->slotno, + slot->part_number, ra, + slotn->slotno, + slotn->part_number); + goto out; + } + } + } + } +out: + mutex_unlock(&info->slots_list_mutex); + + return err; +} + +static int capemgr_load_slot(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + const char *dtbo; + int err; + + if (slot->probe_failed) { + dev_err(dev, "slot #%d: probe failed for '%s'\n", + slot->slotno, slot->part_number); + return -ENODEV; + } + + if (slot->loaded) { + dev_err(dev, "slot #%d: already loaded for '%s'\n", + slot->slotno, slot->part_number); + return -EAGAIN; + } + + /* make sure we don't leak this on repeated calls */ + kfree(slot->dtbo); + slot->dtbo = NULL; + + dev_dbg(dev, "slot #%d: Requesting part number/version based '%s-%s.dtbo\n", + slot->slotno, slot->part_number, slot->version); + + /* request the part number + .dtbo*/ + slot->dtbo = kasprintf(GFP_KERNEL, "%s-%s.dtbo", + slot->part_number, slot->version); + if (slot->dtbo == NULL) { + dev_err(dev, "slot #%d: Failed to get dtbo '%s'\n", + slot->slotno, dtbo); + return -ENOMEM; + } + + dev_dbg(dev, "slot #%d: Requesting firmware '%s' for board-name '%s', version '%s'%s\n", + slot->slotno, + slot->dtbo, slot->board_name, slot->version, + system_state == SYSTEM_BOOTING ? " - booting" : ""); + + err = request_firmware_direct(&slot->fw, slot->dtbo, dev); + if (err != 0) { + dev_dbg(dev, "failed to load firmware '%s'\n", slot->dtbo); + goto err_fail_no_fw; + } + + dev_dbg(dev, "slot #%d: dtbo '%s' loaded; converting to live tree\n", + slot->slotno, slot->dtbo); + + of_fdt_unflatten_tree((void *)slot->fw->data, &slot->overlay); + if (slot->overlay == NULL) { + dev_err(dev, "slot #%d: Failed to unflatten\n", + slot->slotno); + err = -EINVAL; + goto err_fail; + } + + /* mark it as detached */ + of_node_set_flag(slot->overlay, OF_DETACHED); + + /* perform resolution */ + err = of_resolve_phandles(slot->overlay); + if (err != 0) { + dev_err(dev, "slot #%d: Failed to resolve tree\n", + slot->slotno); + goto err_fail; + } + + err = capemgr_verify_overlay(slot); + if (err != 0) { + dev_err(dev, "slot #%d: Failed verification\n", + slot->slotno); + goto err_fail; + } + + err = of_overlay_create(slot->overlay); + if (err < 0) { + dev_err(dev, "slot #%d: Failed to create overlay\n", + slot->slotno); + goto err_fail; + } + slot->overlay_id = err; + + slot->loading = 0; + slot->loaded = 1; + + dev_info(dev, "slot #%d: dtbo '%s' loaded; overlay id #%d\n", + slot->slotno, slot->dtbo, slot->overlay_id); + + return 0; + +err_fail: + + /* TODO: free the overlay, we can't right now cause + * the unflatten method does not track it */ + slot->overlay = NULL; + + release_firmware(slot->fw); + slot->fw = NULL; + +err_fail_no_fw: + slot->loading = 0; + return err; +} + +static int capemgr_unload_slot(struct bone_cape_slot *slot) +{ + if (!slot->loaded || slot->overlay_id == -1) + return -EINVAL; + + of_overlay_destroy(slot->overlay_id); + slot->overlay_id = -1; + + slot->loaded = 0; + + return 0; + +} + +/* slots_list_mutex must be taken */ +static int capemgr_remove_slot_no_lock(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + int ret; + + if (slot == NULL) + return 0; + + if (slot->loaded && slot->overlay_id >= 0) { + /* unload just in case */ + ret = capemgr_unload_slot(slot); + if (ret != 0) { + dev_err(dev, "Unable to unload slot #%d\n", + slot->slotno); + return ret; + } + } + + /* if probed OK, remove the sysfs nodes */ + if (slot->probed && !slot->probe_failed) + bone_cape_slot_sysfs_unregister(slot); + + /* remove it from the list */ + list_del(&slot->node); + + if (slot->nvmem_cell) + nvmem_cell_put(slot->nvmem_cell); + devm_kfree(dev, slot); + return 0; +} + +static int capemgr_remove_slot(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + int ret; + + mutex_lock(&info->slots_list_mutex); + ret = capemgr_remove_slot_no_lock(slot); + mutex_unlock(&info->slots_list_mutex); + + return ret; +} + +static int bone_slot_fill_override(struct bone_cape_slot *slot, + const char *part_number, const char *version) +{ + const struct ee_field *sig_field; + int i, len, has_part_number; + char *p; + + slot->probe_failed = 0; + slot->probed = 0; + + /* zero out signature */ + memset(slot->signature, 0, + sizeof(slot->signature)); + + /* first, fill in all with override defaults */ + for (i = 0; i < ARRAY_SIZE(cape_sig_fields); i++) { + + sig_field = &cape_sig_fields[i]; + + /* point to the entry */ + p = slot->signature + sig_field->start; + + if (sig_field->override) + memcpy(p, sig_field->override, + sig_field->size); + else + memset(p, 0, sig_field->size); + } + + /* if a part_number is supplied use it */ + len = part_number ? strlen(part_number) : 0; + if (len > 0) { + sig_field = &cape_sig_fields[CAPE_EE_FIELD_PART_NUMBER]; + + /* point to the entry */ + p = slot->signature + sig_field->start; + + /* copy and zero out any remainder */ + if (len > sig_field->size) + len = sig_field->size; + memcpy(p, part_number, len); + if (len < sig_field->size) + memset(p + len, 0, sig_field->size - len); + + has_part_number = 1; + } + + /* if a version is supplied use it */ + len = version ? strlen(version) : 0; + if (len > 0) { + sig_field = &cape_sig_fields[CAPE_EE_FIELD_VERSION]; + + /* point to the entry */ + p = slot->signature + sig_field->start; + + /* copy and zero out any remainder */ + if (len > sig_field->size) + len = sig_field->size; + memcpy(p, version, len); + if (len < sig_field->size) + memset(p + len, 0, sig_field->size - len); + } + + /* we must have a part number */ + if (!has_part_number) + return -EINVAL; + + slot->override = 1; + + return 0; +} + +static struct bone_cape_slot * +capemgr_add_slot(struct capemgr_info *info, const char *slot_name, + const char *part_number, const char *version, int prio) +{ + struct bone_cape_slot *slot; + struct device *dev = &info->pdev->dev; + int slotno; + int ret; + + slotno = atomic_inc_return(&info->next_slot_nr) - 1; + + slot = devm_kzalloc(dev, sizeof(*slot), GFP_KERNEL); + if (slot == NULL) + return ERR_PTR(-ENOMEM); + + slot->info = info; + slot->slotno = slotno; + slot->priority = prio; + slot->overlay_id = -1; + + if (slot_name) { + slot->nvmem_cell = nvmem_cell_get(dev, slot_name); + if (IS_ERR(slot->nvmem_cell)) { + ret = PTR_ERR(slot->nvmem_cell); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Failed to get slot eeprom cell\n"); + slot->nvmem_cell = NULL; + goto err_out; + } + } else { + dev_info(dev, "slot #%d: override\n", slotno); + + /* fill in everything with defaults first */ + ret = bone_slot_fill_override(slot, part_number, version); + if (ret != 0) { + dev_err(dev, "slot #%d: override failed\n", slotno); + goto err_out; + } + } + + ret = bone_slot_scan(slot); + if (ret != 0) { + + if (!slot->probe_failed) { + dev_err(dev, "slot #%d: scan failed\n", + slotno); + goto err_out; + } + + dev_err(dev, "slot #%d: No cape found\n", slotno); + /* but all is fine */ + } else { + + dev_info(dev, "slot #%d: '%s'\n", + slotno, slot->text_id); + + ret = bone_cape_slot_sysfs_register(slot); + if (ret != 0) { + dev_err(dev, "slot #%d: sysfs register failed\n", + slotno); + goto err_out; + } + + } + + /* add to the slot list */ + mutex_lock(&info->slots_list_mutex); + list_add_tail(&slot->node, &info->slot_list); + mutex_unlock(&info->slots_list_mutex); + + return slot; + +err_out: + if (slot->nvmem_cell) + nvmem_cell_put(slot->nvmem_cell); + devm_kfree(dev, slot); + return ERR_PTR(ret); +} + +/* return 1 if it makes sense to retry loading */ +static int retry_loading_condition(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + struct bone_cape_slot *slotn; + int ret; + + dev_dbg(dev, "loader: retry_loading slot-%d %s:%s (prio %d)\n", + slot->slotno, slot->part_number, slot->version, + slot->priority); + + mutex_lock(&info->slots_list_mutex); + ret = 0; + list_for_each_entry(slotn, &info->slot_list, node) { + /* if same slot or not loading skip */ + if (!slotn->loading || slotn->retry_loading) + continue; + /* at least one cape is still loading (without retrying) */ + ret = 1; + } + mutex_unlock(&info->slots_list_mutex); + return ret; +} + +/* return 1 if this slot is clear to try to load now */ +static int clear_to_load_condition(struct bone_cape_slot *slot) +{ + struct capemgr_info *info = slot->info; + int my_prio = slot->priority; + struct device *dev = &info->pdev->dev; + int ret; + + dev_dbg(dev, "loader: check slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + mutex_lock(&info->slots_list_mutex); + ret = 1; + list_for_each_entry(slot, &info->slot_list, node) { + /* if any slot is loading with lowest priority */ + if (!slot->loading) + continue; + if (slot->priority < my_prio) { + ret = 0; + break; + } + } + mutex_unlock(&info->slots_list_mutex); + return ret; +} + +static int capemgr_loader(void *data) +{ + struct bone_cape_slot *slot = data; + struct capemgr_info *info = slot->info; + struct device *dev = &info->pdev->dev; + int ret, done, other_loading, booting; + + done = 0; + + slot->retry_loading = 0; + + dev_dbg(dev, "loader: before slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + /* + * We have a basic priority based arbitration system + * Slots have priorities, so the lower priority ones + * should start loading first. So each time we end up + * here. + */ + ret = wait_event_interruptible(info->load_wq, + clear_to_load_condition(slot)); + if (ret < 0) { + dev_warn(dev, "loader, Signal pending\n"); + return ret; + } + + dev_dbg(dev, "loader: after slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + /* using the return value */ + ret = capemgr_load_slot(slot); + + /* wake up all just in case */ + wake_up_interruptible_all(&info->load_wq); + + if (ret == 0) + goto done; + + dev_dbg(dev, "loader: retrying slot-%d %s:%s (prio %d)\n", slot->slotno, + slot->part_number, slot->version, slot->priority); + + /* first attempt has failed; now try each time there's any change */ + slot->retry_loading = 1; + + for (;;) { + booting = (system_state == SYSTEM_BOOTING); + other_loading = retry_loading_condition(slot); + if (!booting && !other_loading) + break; + + /* simple wait for someone to kick us */ + if (other_loading) { + DEFINE_WAIT(__wait); + + prepare_to_wait(&info->load_wq, &__wait, + TASK_INTERRUPTIBLE); + finish_wait(&info->load_wq, &__wait); + } else { + /* always delay when booting */ + msleep(boot_scan_period); + } + + if (signal_pending(current)) { + dev_warn(dev, "loader, Signal pending\n"); + ret = -ERESTARTSYS; + goto done; + } + + /* using the return value */ + ret = capemgr_load_slot(slot); + if (ret == 0) + goto done; + + /* wake up all just in case */ + wake_up_interruptible_all(&info->load_wq); + } + +done: + slot->loading = 0; + slot->retry_loading = 0; + + if (ret == 0) { + dev_dbg(dev, "loader: done slot-%d %s:%s (prio %d)\n", + slot->slotno, slot->part_number, slot->version, + slot->priority); + } else { + dev_err(dev, "loader: failed to load slot-%d %s:%s (prio %d)\n", + slot->slotno, slot->part_number, slot->version, + slot->priority); + + /* if it's a override slot remove it */ + if (slot->override) + capemgr_remove_slot(slot); + } + + return ret; +} + +static int +capemgr_probe(struct platform_device *pdev) +{ + struct capemgr_info *info; + struct bone_baseboard *bbrd; + struct bone_cape_slot *slot; + struct device_node *pnode = pdev->dev.of_node; + struct device_node *baseboardmaps_node; + struct device_node *node; + const char *part_number; + const char *version; + const char *board_name; + const char *compatible_name; + char slot_name[16]; + u32 slots_nr; + int i, ret, len, prio; + long val; + char *wbuf, *s, *p, *e; + + /* we don't use platform_data at all; we require OF */ + if (pnode == NULL) + return -ENOTSUPP; + + info = devm_kzalloc(&pdev->dev, + sizeof(struct capemgr_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->pdev = pdev; + platform_set_drvdata(pdev, info); + + atomic_set(&info->next_slot_nr, 0); + INIT_LIST_HEAD(&info->slot_list); + mutex_init(&info->slots_list_mutex); + + init_waitqueue_head(&info->load_wq); + + baseboardmaps_node = NULL; + + /* find the baseboard */ + bbrd = &info->baseboard; + + baseboardmaps_node = of_get_child_by_name(pnode, "baseboardmaps"); + if (baseboardmaps_node == NULL) { + dev_err(&pdev->dev, "Failed to get baseboardmaps node"); + ret = -ENODEV; + goto err_exit; + } + + bbrd->nvmem_cell = nvmem_cell_get(&pdev->dev, "baseboard"); + if (IS_ERR(bbrd->nvmem_cell)) { + ret = PTR_ERR(bbrd->nvmem_cell); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get baseboard eeprom cell\n"); + bbrd->nvmem_cell = NULL; + goto err_exit; + } + + ret = bone_baseboard_scan(bbrd); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to scan baseboard eeprom\n"); + goto err_exit; + } + + dev_info(&pdev->dev, "Baseboard: '%s'\n", bbrd->text_id); + + board_name = NULL; + compatible_name = NULL; + for_each_child_of_node(baseboardmaps_node, node) { + /* there must be board-name */ + if (of_property_read_string(node, "board-name", + &board_name) != 0 || + of_property_read_string(node, "compatible-name", + &compatible_name) != 0) + continue; + + if (strcmp(bbrd->board_name, board_name) == 0) + break; + } + of_node_put(baseboardmaps_node); + baseboardmaps_node = NULL; + + if (node == NULL) { + dev_err(&pdev->dev, "Failed to find compatible map for %s\n", + bbrd->board_name); + ret = -ENODEV; + goto err_exit; + } + bbrd->compatible_name = kstrdup(compatible_name, GFP_KERNEL); + if (bbrd->compatible_name == NULL) { + ret = -ENOMEM; + goto err_exit; + } + of_node_put(node); + + /* get slot number */ + ret = of_property_read_u32(pnode, "#slots", &slots_nr); + if (ret != 0) + slots_nr = 0; + + dev_info(&pdev->dev, "compatible-baseboard=%s - #slots=%d\n", + bbrd->compatible_name, slots_nr); + + for (i = 0; i < slots_nr; i++) { + snprintf(slot_name, sizeof(slot_name), "slot%d", i); + slot = capemgr_add_slot(info, slot_name, NULL, NULL, 0); + if (IS_ERR(slot)) { + dev_err(&pdev->dev, "Failed to add slot #%d\n", + atomic_read(&info->next_slot_nr)); + ret = PTR_ERR(slot); + goto err_exit; + } + } + + /* iterate over enable_partno (if there) */ + if (enable_partno && strlen(enable_partno) > 0) { + + /* allocate a temporary buffer */ + wbuf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL); + if (wbuf == NULL) { + ret = -ENOMEM; + goto err_exit; + } + + /* add any enable_partno capes */ + s = enable_partno; + while (*s) { + /* form is PART[:REV[:PRIO]],PART.. */ + p = strchr(s, ','); + if (p == NULL) + e = s + strlen(s); + else + e = p; + + /* copy to temp buffer */ + len = e - s; + if (len >= PAGE_SIZE - 1) + len = PAGE_SIZE - 1; + memcpy(wbuf, s, len); + wbuf[len] = '\0'; + + /* move to the next */ + s = *e ? e + 1 : e; + + part_number = wbuf; + + /* default version is NULL & prio is 0 */ + version = NULL; + prio = 0; + + /* now split the rev & prio part */ + p = strchr(wbuf, ':'); + if (p != NULL) { + *p++ = '\0'; + if (*p != ':') + version = p; + p = strchr(p, ':'); + if (p != NULL) { + *p++ = '\0'; + ret = kstrtol(p, 10, &val); + if (ret == 0) + prio = val; + } + } + + dev_info(&pdev->dev, + "enabled_partno PARTNO '%s' VER '%s' PR '%d'\n", + part_number, + version ? version : "N/A", prio); + + /* only immediate slots are allowed here */ + slot = capemgr_add_slot(info, NULL, + part_number, version, prio); + + /* we continue even in case of an error */ + if (IS_ERR_OR_NULL(slot)) { + dev_warn(&pdev->dev, "Failed to add slot #%d\n", + atomic_read(&info->next_slot_nr) - 1); + } + } + + devm_kfree(&pdev->dev, wbuf); + } + + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "Failed to pm_runtime_get_sync()\n"); + goto err_exit; + } + + pm_runtime_put(&pdev->dev); + + /* it is safe to create the attribute groups */ + ret = sysfs_create_groups(&pdev->dev.kobj, attr_groups); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to create sysfs attributes\n"); + goto err_exit; + } + /* automatically cleared by driver core now */ + pdev->dev.groups = attr_groups; + + /* now load each (take lock to be sure */ + mutex_lock(&info->slots_list_mutex); + + list_for_each_entry(slot, &info->slot_list, node) { + + /* if matches the disabled ones skip */ + if (bone_match_cape(disable_partno, slot->part_number, + slot->version)) { + dev_info(&pdev->dev, + "Skipping loading of disabled cape with part# %s\n", + slot->part_number); + slot->disabled = 1; + continue; + } + + if (!slot->probe_failed && !slot->loaded) + slot->loading = 1; + } + + /* now start the loader thread(s) (all at once) */ + list_for_each_entry(slot, &info->slot_list, node) { + + if (!slot->loading) + continue; + + slot->loader_thread = kthread_run(capemgr_loader, + slot, "capemgr-loader-%d", + slot->slotno); + if (IS_ERR(slot->loader_thread)) { + dev_warn(&pdev->dev, "slot #%d: Failed to start loader\n", + slot->slotno); + slot->loader_thread = NULL; + } + } + mutex_unlock(&info->slots_list_mutex); + + dev_info(&pdev->dev, "initialized OK.\n"); + + return 0; + +err_exit: + if (bbrd->nvmem_cell) + nvmem_cell_put(bbrd->nvmem_cell); + of_node_put(baseboardmaps_node); + platform_set_drvdata(pdev, NULL); + devm_kfree(&pdev->dev, info); + + return ret; +} + +static int capemgr_remove(struct platform_device *pdev) +{ + struct capemgr_info *info = platform_get_drvdata(pdev); + struct bone_baseboard *bbrd = &info->baseboard; + struct bone_cape_slot *slot, *slotn; + int ret; + + mutex_lock(&info->slots_list_mutex); + list_for_each_entry_safe(slot, slotn, &info->slot_list, node) + capemgr_remove_slot_no_lock(slot); + mutex_unlock(&info->slots_list_mutex); + + platform_set_drvdata(pdev, NULL); + + ret = pm_runtime_get_sync(&pdev->dev); + if (IS_ERR_VALUE(ret)) + return ret; + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + if (bbrd->nvmem_cell) + nvmem_cell_put(bbrd->nvmem_cell); + devm_kfree(&pdev->dev, info); + + return 0; +} + +static struct platform_driver capemgr_driver = { + .probe = capemgr_probe, + .remove = capemgr_remove, + .driver = { + .name = "bone_capemgr", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(capemgr_of_match), + }, +}; + +module_platform_driver(capemgr_driver); + +MODULE_AUTHOR("Pantelis Antoniou"); +MODULE_DESCRIPTION("Beaglebone cape manager"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bone_capemgr"); diff --git a/drivers/misc/cape/Kconfig b/drivers/misc/cape/Kconfig new file mode 100644 index 0000000000000..a2ef85e0415c5 --- /dev/null +++ b/drivers/misc/cape/Kconfig @@ -0,0 +1,5 @@ +# +# Capes +# + +source "drivers/misc/cape/beaglebone/Kconfig" diff --git a/drivers/misc/cape/Makefile b/drivers/misc/cape/Makefile new file mode 100644 index 0000000000000..7c4eb96ab29e4 --- /dev/null +++ b/drivers/misc/cape/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for cape like devices +# + +obj-y += beaglebone/ diff --git a/drivers/misc/cape/beaglebone/Kconfig b/drivers/misc/cape/beaglebone/Kconfig new file mode 100644 index 0000000000000..eeb67828fd829 --- /dev/null +++ b/drivers/misc/cape/beaglebone/Kconfig @@ -0,0 +1,10 @@ +# +# Beaglebone capes +# + +config BEAGLEBONE_PINMUX_HELPER + tristate "Beaglebone Pinmux Helper" + depends on ARCH_OMAP2PLUS && OF + default n + help + Say Y here to include support for the pinmux helper diff --git a/drivers/misc/cape/beaglebone/Makefile b/drivers/misc/cape/beaglebone/Makefile new file mode 100644 index 0000000000000..7f4617a01e262 --- /dev/null +++ b/drivers/misc/cape/beaglebone/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for beaglebone capes +# + +obj-$(CONFIG_BEAGLEBONE_PINMUX_HELPER) += bone-pinmux-helper.o diff --git a/drivers/misc/cape/beaglebone/bone-pinmux-helper.c b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c new file mode 100644 index 0000000000000..d81363a77b103 --- /dev/null +++ b/drivers/misc/cape/beaglebone/bone-pinmux-helper.c @@ -0,0 +1,242 @@ +/* + * Pinmux helper driver + * + * Copyright (C) 2013 Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct of_device_id bone_pinmux_helper_of_match[] = { + { + .compatible = "bone-pinmux-helper", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, bone_pinmux_helper_of_match); + +struct pinmux_helper_data { + struct pinctrl *pinctrl; + char *selected_state_name; +}; + +static ssize_t pinmux_helper_show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + const char *name; + + name = data->selected_state_name; + if (name == NULL || strlen(name) == 0) + name = "none"; + return sprintf(buf, "%s\n", name); +} + +static ssize_t pinmux_helper_store_state(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + struct pinctrl_state *state; + char *state_name; + char *s; + int err; + + /* duplicate (as a null terminated string) */ + state_name = kmalloc(count + 1, GFP_KERNEL); + if (state_name == NULL) + return -ENOMEM; + memcpy(state_name, buf, count); + state_name[count] = '\0'; + + /* and chop off newline */ + s = strchr(state_name, '\n'); + if (s != NULL) + *s = '\0'; + + /* try to select default state at first (if it exists) */ + state = pinctrl_lookup_state(data->pinctrl, state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) + dev_err(dev, "Failed to select state %s\n", + state_name); + } else { + dev_err(dev, "Failed to find state %s\n", state_name); + err = PTR_RET(state); + } + + if (err == 0) { + kfree(data->selected_state_name); + data->selected_state_name = state_name; + } + + return err ? err : count; +} + +static DEVICE_ATTR(state, S_IWUSR | S_IRUGO, + pinmux_helper_show_state, pinmux_helper_store_state); + +static struct attribute *pinmux_helper_attributes[] = { + &dev_attr_state.attr, + NULL +}; + +static const struct attribute_group pinmux_helper_attr_group = { + .attrs = pinmux_helper_attributes, +}; + +static int bone_pinmux_helper_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pinmux_helper_data *data; + struct pinctrl_state *state; + char *state_name; + const char *mode_name; + int mode_len; + int err; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Failed to allocate data\n"); + err = -ENOMEM; + goto err_no_mem; + } + + state_name = kmalloc(strlen(PINCTRL_STATE_DEFAULT) + 1, + GFP_KERNEL); + if (state_name == NULL) { + dev_err(dev, "Failed to allocate state name\n"); + err = -ENOMEM; + goto err_no_state_mem; + } + data->selected_state_name = state_name; + strcpy(data->selected_state_name, PINCTRL_STATE_DEFAULT); + + platform_set_drvdata(pdev, data); + + data->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(data->pinctrl)) { + dev_err(dev, "Failed to get pinctrl\n"); + err = PTR_RET(data->pinctrl); + goto err_no_pinctrl; + } + + /* See if an initial mode is specified in the device tree */ + mode_name = of_get_property(dev->of_node, "mode", &mode_len); + + err = -1; + if (mode_name != NULL ) { + state_name = kmalloc(mode_len + 1, GFP_KERNEL); + if (state_name == NULL) { + dev_err(dev, "Failed to allocate state name\n"); + err = -ENOMEM; + goto err_no_mode_mem; + } + strncpy(state_name, mode_name, mode_len); + + /* try to select requested mode */ + state = pinctrl_lookup_state(data->pinctrl, state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) { + dev_warn(dev, "Unable to select requested mode %s\n", state_name); + kfree(state_name); + } else { + kfree(data->selected_state_name); + data->selected_state_name = state_name; + dev_notice(dev, "Set initial pinmux mode to %s\n", state_name); + } + } + } + + /* try to select default state if mode_name failed */ + if ( err != 0) { + state = pinctrl_lookup_state(data->pinctrl, + data->selected_state_name); + if (!IS_ERR(state)) { + err = pinctrl_select_state(data->pinctrl, state); + if (err != 0) { + dev_err(dev, "Failed to select default state\n"); + goto err_no_state; + } + } else { + data->selected_state_name = '\0'; + } + } + + /* Register sysfs hooks */ + err = sysfs_create_group(&dev->kobj, &pinmux_helper_attr_group); + if (err) { + dev_err(dev, "Failed to create sysfs group\n"); + goto err_no_sysfs; + } + + return 0; + +err_no_sysfs: +err_no_state: +err_no_mode_mem: + devm_pinctrl_put(data->pinctrl); +err_no_pinctrl: + devm_kfree(dev, data->selected_state_name); +err_no_state_mem: + devm_kfree(dev, data); +err_no_mem: + return err; +} + +static int bone_pinmux_helper_remove(struct platform_device *pdev) +{ + struct pinmux_helper_data *data = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + sysfs_remove_group(&dev->kobj, &pinmux_helper_attr_group); + kfree(data->selected_state_name); + devm_pinctrl_put(data->pinctrl); + devm_kfree(dev, data); + + return 0; +} + +struct platform_driver bone_pinmux_helper_driver = { + .probe = bone_pinmux_helper_probe, + .remove = bone_pinmux_helper_remove, + .driver = { + .name = "bone-pinmux-helper", + .owner = THIS_MODULE, + .of_match_table = bone_pinmux_helper_of_match, + }, +}; + +module_platform_driver(bone_pinmux_helper_driver); + +MODULE_AUTHOR("Pantelis Antoniou"); +MODULE_DESCRIPTION("Beaglebone pinmux helper driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bone-pinmux-helper"); diff --git a/drivers/misc/cape_bone_argus/Kconfig b/drivers/misc/cape_bone_argus/Kconfig new file mode 100644 index 0000000000000..1b396611e447f --- /dev/null +++ b/drivers/misc/cape_bone_argus/Kconfig @@ -0,0 +1,7 @@ +comment "Argus cape driver for beaglebone black" + +config CAPE_BONE_ARGUS + tristate "Argus Cape Driver" + default M + help + Argus Cape Driver diff --git a/drivers/misc/cape_bone_argus/Makefile b/drivers/misc/cape_bone_argus/Makefile new file mode 100644 index 0000000000000..5482562177766 --- /dev/null +++ b/drivers/misc/cape_bone_argus/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Argus cape +# + +obj-$(CONFIG_CAPE_BONE_ARGUS) += cape_bone_argus.o diff --git a/drivers/misc/cape_bone_argus/cape_bone_argus.c b/drivers/misc/cape_bone_argus/cape_bone_argus.c new file mode 100644 index 0000000000000..c434218d93de1 --- /dev/null +++ b/drivers/misc/cape_bone_argus/cape_bone_argus.c @@ -0,0 +1,415 @@ +/* -*- linux-c -*- */ + +/* Linux Kernel Module for Breakaway Systems UPS control. + * + * PUBLIC DOMAIN + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Module to sync file systems leaving them mounted read-only, + * then signal the UPS that it is safe to remove + * power, and finally halt the processor. + * Also to allow kicking the watchdog from user mode. + */ +#undef DEBUG_ARGUS + +#define N_GPIOS 9 /* Total number of GPIOS used */ + +#define REQ_GPIO_IDX 0 /* Indices got GPIOS */ +#define ACK_GPIO_IDX 1 +#define WDG_GPIO_IDX 2 +#define LED1_GREEN_IDX 3 +#define LED1_RED_IDX 4 +#define LED2_GREEN_IDX 5 +#define LED2_RED_IDX 6 +#define GEN_OUT1_IDX 7 +#define GEN_OUT2_IDX 8 + +static struct argus_ups_info { /* As there is only one UPS device we can make this static */ + struct fasync_struct *async_queue; /* asynchronous readers */ + struct platform_device *pdev; + struct pwm_device *pwm_dev; + struct gpio gpios[N_GPIOS]; +} info = {NULL, NULL, NULL, /* Some fields filled in by device tree, probe, etc. */ + { + {-1, GPIOF_IN, "Powerdown request"}, + {-1, GPIOF_OUT_INIT_LOW, "Powerdown acknowledge" }, + {-1, GPIOF_OUT_INIT_LOW, "Watchdog"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 1 Green"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 1 Red"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 2 Green"}, + {-1, GPIOF_OUT_INIT_LOW, "LED 2 Red"}, + {-1, GPIOF_OUT_INIT_LOW, "General Output #1"}, + {-1, GPIOF_OUT_INIT_LOW, "General Output #2"} + }, +}; + + +static const struct of_device_id argus_ups_of_ids[] = { + { .compatible = "argus-ups" }, + { } +}; + +static int argus_ups_major; /* Major device number */ + +static struct class *argus_ups_class; /* /sys/class */ + +dev_t argus_ups_dev; /* Device number */ + +static struct cdev *argus_ups_cdev; /* Character device details */ + +static void argus_ups_function(struct work_struct *ignored); /* Work function */ + +static DECLARE_DELAYED_WORK(argus_ups_work, argus_ups_function); /* Kernel workqueue glue */ + +static struct workqueue_struct *argus_ups_workqueue; /* Kernel workqueue */ + +static int debug = 0; +module_param(debug, int, S_IRUGO); +MODULE_PARM_DESC(debug, "Debug flag"); + +static int shutdown = 1; +module_param(shutdown, int, S_IRUGO); +MODULE_PARM_DESC(shutdown, "Shutdown flag"); + +#ifdef DEBUG_ARGUS +static char* fs_type_names[] = {"vfat", "ext4"}; /* File system names that may need syncing. */ +#endif + +/* Just kick watchdog */ + +static ssize_t argus_ups_write(struct file *filp, const char __user *buf, size_t count, + loff_t *f_pos) +{ + int i; + if (debug >= 3) { + printk("Writing to watchdog - count:%d\n", count); + } + for (i = 0; i < count; i++) { + gpio_set_value(info.gpios[WDG_GPIO_IDX].gpio, 1); /* Set it */ + msleep(10); /* Wait */ + gpio_set_value(info.gpios[WDG_GPIO_IDX].gpio, 0); /* End clearing it */ + msleep(10); + } + return count; /* Always returns what we sent, regardsless */ +} + +static long argus_ups_ioctl(struct file *file, + unsigned int ioctl, + unsigned long param) +{ + if (debug >= 4) { + printk(KERN_ERR "ioctl: %d, param: %ld\n", ioctl, param); + } + switch(ioctl) { + case 10001: { + debug = param; + printk("Debug set to %d\n", debug); + break; + } + case 10002: { + unsigned char value = param & 0x0F; + unsigned char mask = (param >> 4) & 0x0F; + int i; /* Loop iterator */ + if (mask == 0) { + printk(KERN_ERR "Pointless mask of zero!\n"); + } + for (i = 0; i < 4; i++) { /* For all four LEDS */ + if (mask & (1 << i)) { /* Only masked values */ + if (value & (1 << i)) { /* On - so gpio is hi */ + if (debug >= 4) { + printk("Setting %d hi, ", + info.gpios[LED1_GREEN_IDX + i].gpio); + } + gpio_set_value(info.gpios[LED1_GREEN_IDX + i].gpio, 1); + } + else { /* Off - so gpio is lo */ + if (debug >= 4) { + printk("Setting %d lo, ", + info.gpios[LED1_GREEN_IDX + i].gpio); + } + gpio_set_value(info.gpios[LED1_GREEN_IDX + i].gpio, 0); + } + } + } + if (debug >= 4) { + printk("\n"); + } + break; + } + case 10003: { + gpio_set_value(info.gpios[GEN_OUT1_IDX].gpio, param & 1); + break; + } + case 10004: { + gpio_set_value(info.gpios[GEN_OUT2_IDX].gpio, param & 1); + break; + } + default: + { + printk(KERN_ERR "Invalid ioctl %d\n", ioctl); + return -1; + } + } + return 0; +} + +static int argus_ups_fasync(int fd, struct file *filp, int mode) +{ + printk(KERN_ERR "In argus_ups_fasync() fd:%d, filp:%p, mode:%d\n", fd, filp, mode); + return fasync_helper(fd, filp, mode, &info.async_queue); +} + +static struct file_operations argus_ups_fops = { /* Only file operation is to kick watchdog via a write */ + .owner = THIS_MODULE, + .llseek = NULL, + .read = NULL, + .unlocked_ioctl = argus_ups_ioctl, + .write = argus_ups_write, + .open = NULL, + .release = NULL, + .fasync = argus_ups_fasync, +}; + +#ifdef DEBUG_ARGUS +static void remount_sb(struct super_block *sb) +{ + int flags = MS_RDONLY; + int result = sb->s_op->remount_fs(sb, &flags, ""); + if (debug) { + printk("Processing superblock %p\n", sb); + printk("Remount operation returned %d\n", result); + } +} +#endif + +static void argus_ups_function(struct work_struct *ignored) +{ + static int testdata = 0; /* Data for test */ + int i; /* Iterator */ + testdata++; + if (!gpio_get_value(info.gpios[REQ_GPIO_IDX].gpio)) { + queue_delayed_work(argus_ups_workqueue, &argus_ups_work, HZ/100); /* Re-queue in 10mS*/ + return; + } + printk(KERN_ERR "Request received\n"); + if (debug) { + printk("Shutdown request received from UPS\n"); + } + if (!shutdown) { + printk("Shutdown request ignored\n"); + return; + } + + if (debug) { + printk("Sending async kill SIGIO to %p\n", info.async_queue); + } + if (info.async_queue) { /* Try and tell usermode to halt system */ + kill_fasync(&info.async_queue, SIGIO, POLL_IN); + } + gpio_set_value(info.gpios[LED1_GREEN_IDX].gpio, 0); /* Turn off green LED1 */ + for (i = 0; i < 300; i++) { /* Toggle acknowledge at 10 Hz for 15 seconds */ + if (debug >= 2) { + printk("Waiting for first shutdown request:%d\n", i); + } + gpio_set_value(info.gpios[ACK_GPIO_IDX].gpio, i & 1); /* Toggle acknowledge */ + gpio_set_value(info.gpios[LED1_RED_IDX].gpio, i & 1); /* and LED1 red */ + msleep(50); /* Wait in 50ms increments */ + } + + { + char *argv[] = { "/sbin/halt", NULL }; + static char *envp[] = { + "HOME=/", + "TERM=linux", + "PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin", NULL }; + + call_usermodehelper( argv[0], argv, envp, UMH_WAIT_PROC ); + } + for (i = 0; i < 300; i++) { /* Toggle acknowledge at 10 Hz for 15 more seconds */ + if (debug >= 2) { + printk("Waiting for second shutdown request:%d\n", i); + } + gpio_set_value(info.gpios[ACK_GPIO_IDX].gpio, i & 1); /* Toggle acknowledge */ + gpio_set_value(info.gpios[LED1_RED_IDX].gpio, i & 1); /* and LED1 red */ + msleep(50); /* Wait in 50ms increments */ + } + printk(KERN_ERR "Usermode failed to halt system\n"); + kernel_halt(); /* Last resort - may give some oopss */ +} + + +static int argus_ups_probe(struct platform_device *pdev) /* Entry point */ +{ + struct pinctrl *pinctrl; + struct device_node *pnode = pdev->dev.of_node; + int i; + int ret; + printk("Init UPS module - debug=%d, shutdown=%d\n", + debug, shutdown); + platform_set_drvdata(pdev, &info); + info.pdev = pdev; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + return -1; + } + ret = of_property_read_u32(pnode, "debug", &debug); + if (ret != 0) { + dev_err(&pdev->dev, "Unable to read debug parameter\n"); + } + else { + printk("Debug parameter read from DT:%d\n", debug); + } + + ret = of_property_read_u32(pnode, "shutdown", &shutdown); + if (ret != 0) { + dev_err(&pdev->dev, "Unable to read shutdown parameter\n"); + } + else { + printk("Shutdown parameter read from DT:%d\n", shutdown); + } + + ret = of_gpio_count(pnode); + + if (ret != N_GPIOS) { + printk(KERN_ERR "Wrong number of gpios"); + return -1; + } + + for (i = 0; i < of_gpio_count(pnode); i++) { + ret = of_get_gpio_flags(pnode, i, NULL); + if (debug) { + printk("GPIO#%d:%d\n", i, ret); + } + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "unable to get GPIO %d\n", i); + goto err_no_gpio; + } + info.gpios[i].gpio = ret; + } + + + ret = alloc_chrdev_region(&argus_ups_dev, 0, 2, "argus_ups"); + argus_ups_major = MAJOR(argus_ups_dev); + if (ret) { + printk(KERN_ERR "Error %d adding argus_ups\n", ret); + return -1; + } + if (debug) { + printk("argus_ups major: %d\n", argus_ups_major); + } + argus_ups_cdev = cdev_alloc(); /* Make this a character device */ + argus_ups_cdev->ops = &argus_ups_fops; /* File operations */ + argus_ups_cdev->owner = THIS_MODULE; /* Top level device */ + ret = cdev_add(argus_ups_cdev, argus_ups_dev, 1); /* Add it to the kernel */ + if (ret) { + printk(KERN_ERR "cdev_add returned %d\n", ret); + unregister_chrdev_region(0, 1); + return -1; + } + ret = gpio_request_array(info.gpios, N_GPIOS); + if (ret) { + printk(KERN_ERR "Error %d requesting GPIOs\n", ret); + unregister_chrdev_region(0, 1); + return -1; + } + + argus_ups_class = class_create(THIS_MODULE, "argus_ups"); /* /sys/class entry for udev */ + if (IS_ERR(argus_ups_class)) { + printk(KERN_ERR "Error creating argus_ups_class\n"); + unregister_chrdev_region(0, 1); + return -1; + } + device_create(argus_ups_class, NULL, MKDEV(argus_ups_major, 0), NULL, "argus_ups"); + argus_ups_workqueue = create_singlethread_workqueue("argus_ups"); + INIT_DELAYED_WORK(&argus_ups_work, argus_ups_function); + queue_delayed_work(argus_ups_workqueue, &argus_ups_work, 0); /* Start work immediately */ + + return 0; +err_no_gpio: + return ret; + +} + + +static void argus_ups_cleanup(void) +{ + printk("Module cleanup called\n"); + while (cancel_delayed_work(&argus_ups_work) == 0) { + flush_workqueue(argus_ups_workqueue); /* Make sure all work is completed */ + } + destroy_workqueue(argus_ups_workqueue); + gpio_free_array(info.gpios, N_GPIOS); + device_destroy(argus_ups_class, argus_ups_dev); + class_destroy(argus_ups_class); + unregister_chrdev_region(argus_ups_dev, 1); + cdev_del(argus_ups_cdev); +} + + + +static int argus_ups_remove(struct platform_device *pdev) +{ + printk("In argus_ups_remove()\n"); + argus_ups_cleanup(); + printk("After cleanup\n"); + return 0; +} + +#define ARGUS_UPS_PM_OPS NULL + +struct platform_driver argus_ups_driver = { + .probe = argus_ups_probe, + .remove = argus_ups_remove, + .driver = { + .name = "argus-ups", + .owner = THIS_MODULE, + .pm = ARGUS_UPS_PM_OPS, + .of_match_table = argus_ups_of_ids, + }, +}; + + +static int __init argus_ups_init(void) +{ + return platform_driver_probe(&argus_ups_driver, + argus_ups_probe); +} + +static void __exit argus_ups_exit(void) +{ + platform_driver_unregister(&argus_ups_driver); + printk("After driver unregister\n"); +} + +module_init(argus_ups_init); +module_exit(argus_ups_exit); + +/* + * Get rid of taint message. + */ +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Lambert"); /* Who wrote this module? */ +MODULE_DESCRIPTION("Argus UPS control"); /* What does this module do */ +MODULE_ALIAS("platform:argus-ups"); +MODULE_DEVICE_TABLE(of, argus_ups_of_ids); diff --git a/drivers/misc/devovmgr.c b/drivers/misc/devovmgr.c new file mode 100644 index 0000000000000..82d2b077d8d62 --- /dev/null +++ b/drivers/misc/devovmgr.c @@ -0,0 +1,1305 @@ +/* + * Device overlay manager + * + * Copyright (C) 2015 Konsulko Group + * Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +enum dovmgr_type { + ITEM_PCI, + ITEM_USB +}; + +struct dovmgr_item; + +struct dovmgr_dev_item { + struct dovmgr_item *item; + struct list_head node; + struct device *dev; + const struct firmware *fw; + struct device_node *overlay; + int overlay_id; + struct work_struct work; +}; + +struct dovmgr_item { + struct config_item item; + char *path; + bool enable; + char *overlay_name; + struct mutex dev_item_mutex; + struct list_head dev_item_list; + enum dovmgr_type type; + union { + struct pci_device_id pci; + struct usb_device_id usb; + }; +}; + +struct config_group dovmgr_pci_group; +struct config_group dovmgr_usb_group; + +static inline struct dovmgr_item *to_dovmgr_item(struct config_item *cfsitem) +{ + if (!cfsitem) + return NULL; + + return container_of(cfsitem, struct dovmgr_item, item); +} + +static int dovmgr_notifier_action(struct config_group *group, + unsigned long action, struct device *dev, + int (*do_match)(struct dovmgr_item *item, struct device *dev), + int (*do_action)(struct dovmgr_item *item, unsigned long action, + struct device *dev)) +{ + struct config_item *cfsitem; + struct dovmgr_item *item; + int ret; + + /* only handle device notifiers */ + if (action != BUS_NOTIFY_ADD_DEVICE && + action != BUS_NOTIFY_DEL_DEVICE && + action != BUS_NOTIFY_REMOVED_DEVICE) + return 0; + + ret = 0; + mutex_lock(&group->cg_subsys->su_mutex); + list_for_each_entry(cfsitem, &group->cg_children, ci_entry) { + item = to_dovmgr_item(cfsitem); + if (!item->enable || !(*do_match)(item, dev)) + continue; + + ret = (*do_action)(item, action, dev); + if (ret != 0) + break; + } + mutex_unlock(&group->cg_subsys->su_mutex); + return ret; +} + +#if IS_ENABLED(CONFIG_PCI) +/* copy of drivers/pci/pci.h */ +static inline const struct pci_device_id * +pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev) +{ + if ((id->vendor == PCI_ANY_ID || id->vendor == dev->vendor) && + (id->device == PCI_ANY_ID || id->device == dev->device) && + (id->subvendor == PCI_ANY_ID || + id->subvendor == dev->subsystem_vendor) && + (id->subdevice == PCI_ANY_ID || + id->subdevice == dev->subsystem_device) && + !((id->class ^ dev->class) & id->class_mask)) + return id; + return NULL; +} + +static int dovmgr_pci_item_match(struct dovmgr_item *item, struct device *dev) +{ + struct pci_dev *pdev; + + BUG_ON(item->type != ITEM_PCI); + pdev = to_pci_dev(dev); + + return pci_match_one_device(&item->pci, pdev) != NULL; +} +#endif + +#if IS_ENABLED(CONFIG_USB) +/* in drivers/usb/core/driver.c */ +extern int usb_match_device(struct usb_device *dev, + const struct usb_device_id *id); + +static int dovmgr_usb_item_match(struct dovmgr_item *item, struct device *dev) +{ + struct usb_device *udev; + + BUG_ON(item->type != ITEM_USB); + udev = to_usb_device(dev); + + return usb_match_device(udev, &item->usb); +} +#endif + +static struct dovmgr_dev_item *dovmgr_lookup_dev_item(struct dovmgr_item *item, + struct device *dev) +{ + struct dovmgr_dev_item *ditem; + + list_for_each_entry(ditem, &item->dev_item_list, node) + if (ditem->dev == dev) + return ditem; + return NULL; +} + +static void dovmgr_item_work_func(struct work_struct *work) +{ + struct dovmgr_dev_item *ditem = container_of(work, + struct dovmgr_dev_item, work); + struct dovmgr_item *item = ditem->item; + struct device *dev; + struct device_node *np; + int err; + + mutex_lock(&item->dev_item_mutex); + + dev = ditem->dev; + np = dev->of_node; + if (!dev || !np || !item->overlay_name || ditem->overlay_id >= 0) + goto out_unlock; + + pr_info("%s: %s %s\n", __func__, + kobject_name(&dev->kobj), of_node_full_name(np)); + + err = request_firmware_direct(&ditem->fw, item->overlay_name, dev); + if (err != 0) { + pr_err("%s: %s failed to load firmware '%s'\n", __func__, + kobject_name(&dev->kobj), item->overlay_name); + goto out_unlock; + } + + of_fdt_unflatten_tree((void *)ditem->fw->data, &ditem->overlay); + if (ditem->overlay == NULL) { + pr_err("%s: %s failed to load firmware '%s'\n", __func__, + kobject_name(&dev->kobj), item->overlay_name); + goto out_release_fw; + } + + /* mark it as detached */ + of_node_set_flag(ditem->overlay, OF_DETACHED); + + /* perform resolution */ + err = of_resolve_phandles(ditem->overlay); + if (err != 0) { + pr_err("%s: %s failed to resolve tree\n", __func__, + kobject_name(&dev->kobj)); + goto out_release_overlay; + } + + err = of_overlay_create_target_root(ditem->overlay, np); + if (err < 0) { + pr_err("%s: %s failed to create overlay\n", __func__, + kobject_name(&dev->kobj)); + goto out_release_overlay; + } + ditem->overlay_id = err; + +out_unlock: + mutex_unlock(&item->dev_item_mutex); + return; + +out_release_overlay: + /* TODO: free the overlay, we can't right now cause + * the unflatten method does not track it */ + ditem->overlay = NULL; +out_release_fw: + release_firmware(ditem->fw); + ditem->fw = NULL; + goto out_unlock; +} + +/* dev item list mutex lock must be held */ +static int dovmgr_add_dev_item(struct dovmgr_item *item, struct device *dev) +{ + struct dovmgr_dev_item *ditem; + + /* first make sure there's no duplicate */ + if (dovmgr_lookup_dev_item(item, dev)) + return -EEXIST; + + /* add the device item */ + ditem = kzalloc(sizeof(*ditem), GFP_KERNEL); + if (!ditem) + return -ENOMEM; + ditem->overlay_id = -1; + ditem->dev = get_device(dev); + INIT_WORK(&ditem->work, dovmgr_item_work_func); + ditem->item = item; + + list_add_tail(&ditem->node, &item->dev_item_list); + + pr_info("%s: added device %s from item's %s list\n", __func__, + kobject_name(&dev->kobj), + config_item_name(&item->item)); + + /* now schedule the overlay application */ + if (item->overlay_name) + schedule_work(&ditem->work); + + return 0; +} + +static int dovmgr_remove_dev_item(struct dovmgr_item *item, struct device *dev) +{ + struct dovmgr_dev_item *ditem; + + /* find it */ + ditem = dovmgr_lookup_dev_item(item, dev); + if (!ditem) + return -ENODEV; + + if (work_pending(&ditem->work)) + cancel_work_sync(&ditem->work); + + if (ditem->overlay_id >= 0) { + of_overlay_destroy(ditem->overlay_id); + ditem->overlay_id = -1; + + } + + if (ditem->overlay) { + /* TODO: free the overlay, we can't right now cause + * the unflatten method does not track it */ + ditem->overlay = NULL; + } + + if (ditem->fw) { + /* TODO release_firmware(ditem->fw); */ + release_firmware(ditem->fw); + ditem->fw = NULL; + } + + put_device(ditem->dev); + list_del(&ditem->node); + + kfree(ditem); + + pr_info("%s: removed device %s from item's %s list\n", __func__, + kobject_name(&dev->kobj), + config_item_name(&item->item)); + + return 0; +} + +static int dovmgr_item_notify(struct dovmgr_item *item, + unsigned long action, struct device *dev) +{ + int ret; + + ret = 0; + mutex_lock(&item->dev_item_mutex); + + switch (action) { + case BUS_NOTIFY_ADD_DEVICE: + pr_info("%s: BUS_NOTIFY_ADD_DEVICE for %s\n", __func__, + kobject_name(&dev->kobj)); + + ret = dovmgr_add_dev_item(item, dev); + if (ret != 0) + goto out_unlock; + + break; + + case BUS_NOTIFY_DEL_DEVICE: + pr_info("%s: BUS_NOTIFY_DEL_DEVICE for %s\n", __func__, + kobject_name(&dev->kobj)); + break; + + case BUS_NOTIFY_REMOVED_DEVICE: + pr_info("%s: BUS_NOTIFY_REMOVE_DEVICE for %s\n", __func__, + kobject_name(&dev->kobj)); + + ret = dovmgr_remove_dev_item(item, dev); + if (ret != 0) + goto out_unlock; + + break; + } + +out_unlock: + mutex_unlock(&item->dev_item_mutex); + + return ret; +} + +#if IS_ENABLED(CONFIG_PCI) +static int dovmgr_pci_add_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (!item->enable || !dovmgr_pci_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_ADD_DEVICE, dev); +} + +static int dovmgr_pci_removed_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (item->enable || !dovmgr_pci_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_REMOVED_DEVICE, dev); +} +#endif + +#if IS_ENABLED(CONFIG_USB) +static int dovmgr_usb_add_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (item->enable || !dovmgr_usb_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_ADD_DEVICE, dev); +} + +static int dovmgr_usb_removed_iterator(struct device *dev, void *data) +{ + struct dovmgr_item *item = data; + + /* do add match */ + if (!item->enable || !dovmgr_usb_item_match(item, dev)) + return 0; + + pr_info("%s: dev=%s\n", __func__, kobject_name(&dev->kobj)); + + return dovmgr_item_notify(item, BUS_NOTIFY_REMOVED_DEVICE, dev); +} +#endif + +static int dovmgr_item_set_enable(struct dovmgr_item *item, bool new_enable) +{ + int ret; + + if (new_enable == item->enable) + return 0; + + item->enable = new_enable; + switch (item->type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + ret = bus_for_each_dev(&pci_bus_type, NULL, item, + new_enable ? dovmgr_pci_add_iterator : + dovmgr_pci_removed_iterator); + if (ret != 0) + return ret; + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + ret = bus_for_each_dev(&usb_bus_type, NULL, item, + new_enable ? dovmgr_usb_add_iterator : + dovmgr_usb_removed_iterator); + if (ret != 0) + return ret; + break; +#endif + default: + break; + } + return 0; +} + + +CONFIGFS_ATTR_STRUCT(dovmgr_item); +#define DOVMGR_ITEM_ATTR(_name, _mode, _show, _store) \ +struct dovmgr_item_attribute dovmgr_item_attr_##_name = \ + __CONFIGFS_ATTR(_name, _mode, _show, _store) +#define DOVMGR_ITEM_ATTR_RO(_name, _show) \ +struct dovmgr_item_attribute dovmgr_item_attr_##_name = \ + __CONFIGFS_ATTR_RO(_name, _show) + +CONFIGFS_BIN_ATTR_STRUCT(dovmgr_item); +#define DOVMGR_ITEM_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) \ +struct dovmgr_item_bin_attribute dovmgr_item_bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) +#define DOVMGR_ITEM_BIN_ATTR_RO(_name, _read, _priv, _max) \ +struct dovmgr_item_bin_attribute dovmgr_item_bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR_RO(_name, _read, _priv, _max) + +static ssize_t dovmgr_item_str_show(struct dovmgr_item *item, + char *page, char **strp) +{ + return snprintf(page, PAGE_SIZE, "%s\n", + *strp ? *strp : ""); +} + +static ssize_t dovmgr_item_str_store(struct dovmgr_item *item, + const char *page, size_t count, char **strp) +{ + const char *s; + int len; + + /* copy to path buffer (and make sure it's always zero terminated */ + len = strnlen(page, PAGE_SIZE); + if (len >= PAGE_SIZE) + return -EINVAL; + s = page + len; + while (len > 0 && *--s == '\n') + len--; + if (len == 0) + return -EINVAL; + + if (*strp) + kfree(*strp); + *strp = kmalloc(len + 1, GFP_KERNEL); + if (!*strp) + return -ENOMEM; + memcpy(*strp, page, len); + (*strp)[len + 1] = '\0'; + + return count; +} + +static ssize_t dovmgr_item_path_show(struct dovmgr_item *item, char *page) +{ + return dovmgr_item_str_show(item, page, &item->path); +} + +static ssize_t dovmgr_item_path_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + return dovmgr_item_str_store(item, page, count, &item->path); +} + +static ssize_t dovmgr_item_enable_show(struct dovmgr_item *item, char *page) +{ + return snprintf(page, PAGE_SIZE, "%u\n", !!item->enable); +} + +static ssize_t dovmgr_item_enable_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + + ret = dovmgr_item_set_enable(item, !!val); + if (ret != 0) + return ret; + + return count; +} + +static ssize_t dovmgr_item_overlay_show(struct dovmgr_item *item, char *page) +{ + ssize_t ret; + + mutex_lock(&item->dev_item_mutex); + ret = snprintf(page, PAGE_SIZE, "%s\n", item->overlay_name ? + item->overlay_name : ""); + mutex_unlock(&item->dev_item_mutex); + return ret; +}; + + +static ssize_t dovmgr_item_overlay_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + ssize_t ret; + + mutex_lock(&item->dev_item_mutex); + kfree(item->overlay_name); + item->overlay_name = kstrndup(page, PAGE_SIZE, GFP_KERNEL); + if (!item->overlay_name) + ret = -ENOMEM; + else + ret = count; + mutex_unlock(&item->dev_item_mutex); + return ret; +} + +static ssize_t dovmgr_item_status_show(struct dovmgr_item *item, char *page) +{ + struct dovmgr_dev_item *ditem; + char *p, *e; + int len; + + p = page; + e = page + PAGE_SIZE; + + mutex_lock(&item->dev_item_mutex); + list_for_each_entry(ditem, &item->dev_item_list, node) { + len = snprintf(p, e - p, "%s:%s:%d\n", + kobject_name(&ditem->dev->kobj), + of_node_full_name(ditem->dev->of_node), + ditem->overlay_id); + p += len; + if (p >= e - 1) + break; + } + mutex_unlock(&item->dev_item_mutex); + + return p - page; +} + +DOVMGR_ITEM_ATTR(path, S_IRUGO | S_IWUSR, + dovmgr_item_path_show, dovmgr_item_path_store); +DOVMGR_ITEM_ATTR_RO(status, dovmgr_item_status_show); +DOVMGR_ITEM_ATTR(enable, S_IRUGO | S_IWUSR, + dovmgr_item_enable_show, dovmgr_item_enable_store); +DOVMGR_ITEM_ATTR(overlay, S_IRUGO | S_IWUSR, + dovmgr_item_overlay_show, dovmgr_item_overlay_store); + +#if IS_ENABLED(CONFIG_PCI) +static ssize_t dovmgr_item_pci_device_show(struct dovmgr_item *item, char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.device); +} + +static ssize_t dovmgr_item_pci_device_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.device = val; + return count; +} + +static ssize_t dovmgr_item_pci_vendor_show(struct dovmgr_item *item, char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.vendor); +} + +static ssize_t dovmgr_item_pci_vendor_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.vendor = val; + return count; +} + +static ssize_t dovmgr_item_pci_subdevice_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%08x\n", item->pci.subdevice); +} + +static ssize_t dovmgr_item_pci_subdevice_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.subdevice = val; + return count; +} + +static ssize_t dovmgr_item_pci_subvendor_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%08x\n", item->pci.subvendor); +} + +static ssize_t dovmgr_item_pci_subvendor_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.subvendor = val; + return count; +} + +static ssize_t dovmgr_item_pci_class_show(struct dovmgr_item *item, char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.class); +} + +static ssize_t dovmgr_item_pci_class_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.class = val; + return count; +} + +static ssize_t dovmgr_item_pci_class_mask_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", item->pci.class_mask); +} + +static ssize_t dovmgr_item_pci_class_mask_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->pci.class_mask = val; + return count; +} + +DOVMGR_ITEM_ATTR(device, S_IRUGO | S_IWUSR, + dovmgr_item_pci_device_show, dovmgr_item_pci_device_store); +DOVMGR_ITEM_ATTR(vendor, S_IRUGO | S_IWUSR, + dovmgr_item_pci_vendor_show, dovmgr_item_pci_vendor_store); +DOVMGR_ITEM_ATTR(subdevice, S_IRUGO | S_IWUSR, + dovmgr_item_pci_subdevice_show, dovmgr_item_pci_subdevice_store); +DOVMGR_ITEM_ATTR(subvendor, S_IRUGO | S_IWUSR, + dovmgr_item_pci_subvendor_show, dovmgr_item_pci_subvendor_store); +DOVMGR_ITEM_ATTR(class, S_IRUGO | S_IWUSR, + dovmgr_item_pci_class_show, dovmgr_item_pci_class_store); +DOVMGR_ITEM_ATTR(class_mask, S_IRUGO | S_IWUSR, + dovmgr_item_pci_class_mask_show, dovmgr_item_pci_class_mask_store); +#endif + +#if IS_ENABLED(CONFIG_USB) +static ssize_t dovmgr_item_usb_idProduct_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", + item->usb.idProduct); +} + +static ssize_t dovmgr_item_usb_idProduct_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->usb.idProduct = val; + return count; +} + +static ssize_t dovmgr_item_usb_idVendor_show(struct dovmgr_item *item, + char *page) +{ + return snprintf(page, PAGE_SIZE, "0x%04x\n", + item->usb.idVendor); +} + +static ssize_t dovmgr_item_usb_idVendor_store(struct dovmgr_item *item, + const char *page, size_t count) +{ + int ret; + unsigned int val; + + /* cannot modify when item is enabled */ + if (item->enable) + return -EBUSY; + + ret = kstrtouint(page, 0, &val); + if (ret != 0) + return ret; + item->usb.idVendor = val; + return count; +} + +DOVMGR_ITEM_ATTR(idProduct, S_IRUGO | S_IWUSR, + dovmgr_item_usb_idProduct_show, dovmgr_item_usb_idProduct_store); +DOVMGR_ITEM_ATTR(idVendor, S_IRUGO | S_IWUSR, + dovmgr_item_usb_idVendor_show, dovmgr_item_usb_idVendor_store); +#endif + +#if IS_ENABLED(CONFIG_PCI) +static struct configfs_attribute *dovmgr_pci_attrs[] = { + &dovmgr_item_attr_path.attr, + &dovmgr_item_attr_status.attr, + &dovmgr_item_attr_enable.attr, + &dovmgr_item_attr_overlay.attr, + &dovmgr_item_attr_device.attr, + &dovmgr_item_attr_vendor.attr, + &dovmgr_item_attr_subdevice.attr, + &dovmgr_item_attr_subvendor.attr, + &dovmgr_item_attr_class.attr, + &dovmgr_item_attr_class_mask.attr, + NULL, +}; +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct configfs_attribute *dovmgr_usb_attrs[] = { + &dovmgr_item_attr_path.attr, + &dovmgr_item_attr_enable.attr, + &dovmgr_item_attr_status.attr, + &dovmgr_item_attr_overlay.attr, + &dovmgr_item_attr_idVendor.attr, + &dovmgr_item_attr_idProduct.attr, + NULL, +}; +#endif + +static void dovmgr_release(struct config_item *cfsitem) +{ + struct dovmgr_item *item = to_dovmgr_item(cfsitem); + + /* disable item (this removes the overlay and all) */ + dovmgr_item_set_enable(item, false); + + kfree(item->path); + kfree(item); +} + +CONFIGFS_ATTR_OPS(dovmgr_item); +static struct configfs_item_operations dovmgr_item_ops = { + .release = dovmgr_release, + .show_attribute = dovmgr_item_attr_show, + .store_attribute = dovmgr_item_attr_store, +}; + +#if IS_ENABLED(CONFIG_PCI) +static struct config_item_type dovmgr_pci_item_type = { + .ct_item_ops = &dovmgr_item_ops, + .ct_attrs = dovmgr_pci_attrs, + .ct_owner = THIS_MODULE, +}; +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct config_item_type dovmgr_usb_item_type = { + .ct_item_ops = &dovmgr_item_ops, + .ct_attrs = dovmgr_usb_attrs, + .ct_owner = THIS_MODULE, +}; +#endif + +static struct config_item *dovmgr_group_make_item( + struct config_group *group, const char *name, + enum dovmgr_type type) +{ + struct dovmgr_item *item; + struct config_item_type *item_type; + + switch (type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + item_type = &dovmgr_pci_item_type; + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + item_type = &dovmgr_usb_item_type; + break; +#endif + default: + return ERR_PTR(-EINVAL); + }; + + item = kzalloc(sizeof(*item), GFP_KERNEL); + if (!item) + return ERR_PTR(-ENOMEM); + + item->type = type; + item->enable = false; + mutex_init(&item->dev_item_mutex); + INIT_LIST_HEAD(&item->dev_item_list); + + switch (type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + /* default for matching device/vendor */ + item->pci.vendor = PCI_ANY_ID; + item->pci.device = PCI_ANY_ID; + item->pci.subvendor = PCI_ANY_ID; + item->pci.subdevice = PCI_ANY_ID; + item->pci.class = 0; + item->pci.class_mask = 0; + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + /* default */ + item->usb.match_flags = USB_DEVICE_ID_MATCH_DEVICE; + break; +#endif + default: + return ERR_PTR(-EINVAL); + }; + + config_item_init_type_name(&item->item, name, item_type); + return &item->item; +} + +#if IS_ENABLED(CONFIG_PCI) +static struct config_item *dovmgr_group_pci_make_item( + struct config_group *group, const char *name) +{ + return dovmgr_group_make_item(group, name, ITEM_PCI); +} +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct config_item *dovmgr_group_usb_make_item( + struct config_group *group, const char *name) +{ + return dovmgr_group_make_item(group, name, ITEM_USB); +} +#endif + +static void dovmgr_group_drop_item(struct config_group *group, + struct config_item *cfsitem) +{ + struct dovmgr_item *item = to_dovmgr_item(cfsitem); + + switch (item->type) { +#if IS_ENABLED(CONFIG_PCI) + case ITEM_PCI: + break; +#endif +#if IS_ENABLED(CONFIG_USB) + case ITEM_USB: + break; +#endif + default: + break; + } + config_item_put(&item->item); +} + +#if IS_ENABLED(CONFIG_PCI) +static struct configfs_group_operations dovmgr_pci_group_ops = { + .make_item = dovmgr_group_pci_make_item, + .drop_item = dovmgr_group_drop_item, +}; + +static struct config_item_type dovmgr_pci_type = { + .ct_group_ops = &dovmgr_pci_group_ops, + .ct_owner = THIS_MODULE, +}; +#endif + +#if IS_ENABLED(CONFIG_USB) +static struct configfs_group_operations dovmgr_usb_group_ops = { + .make_item = dovmgr_group_usb_make_item, + .drop_item = dovmgr_group_drop_item, +}; + +static struct config_item_type dovmgr_usb_type = { + .ct_group_ops = &dovmgr_usb_group_ops, + .ct_owner = THIS_MODULE, +}; +#endif + +static struct configfs_group_operations dovmgr_ops = { + /* empty - we don't allow anything to be created */ +}; + +static struct config_item_type dovmgr_type = { + .ct_group_ops = &dovmgr_ops, + .ct_owner = THIS_MODULE, +}; + +struct config_group *dovmgr_def_groups[] = { +#if IS_ENABLED(CONFIG_PCI) + &dovmgr_pci_group, +#endif +#if IS_ENABLED(CONFIG_USB) + &dovmgr_usb_group, +#endif + NULL +}; + +static struct configfs_subsystem dovmgr_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "dovmgr", + .ci_type = &dovmgr_type, + }, + .default_groups = dovmgr_def_groups, + }, + .su_mutex = __MUTEX_INITIALIZER(dovmgr_subsys.su_mutex), +}; + +#if IS_ENABLED(CONFIG_PCI) +static int pci_dev_instantiate(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *bus_dev; + struct of_changeset cset; + struct device_node *np, *npb; + int ret; + + npb = NULL; + + /* already instantiated */ + if (dev->of_node) { + pr_debug("%s: dev=%s of_node=%s\n", __func__, + kobject_name(&dev->kobj), + of_node_full_name(dev->of_node)); + return 0; + } + + bus_dev = &pdev->bus->dev; + + pr_debug("%s: %s: %02x:%02x.%02x - node %s%s\n", __func__, + kobject_name(&dev->kobj), + pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + bus_dev->of_node ? of_node_full_name(bus_dev->of_node) : "", + pci_is_bridge(pdev) ? " bridge" : ""); + + /* to create the node, the bus must be present */ + if (!bus_dev->of_node) { + pr_err("%s: No node for %s because no bus device node\n", + __func__, kobject_name(&dev->kobj)); + return 0; + } + + of_changeset_init(&cset); + + np = of_changeset_create_device_node(&cset, bus_dev->of_node, + "%s/pci-%04x-%02x-%02x.%d", + of_node_full_name(bus_dev->of_node), + pci_domain_nr(pdev->bus), pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + if (IS_ERR(np)) { + ret = PTR_ERR(np); + goto out_cset_fail; + } + + ret = of_changeset_add_property_stringf(&cset, np, "compatible", + "pciclass,%04x", (pdev->class >> 8) & 0xffffff); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_u32(&cset, np, "vendor", + pdev->vendor); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_u32(&cset, np, "device", + pdev->device); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_string(&cset, np, "status", "okay"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_bool(&cset, np, "auto-generated"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_attach_node(&cset, np); + if (ret != 0) + goto out_cset_fail; + + /* are we creating a bridge; swell */ + npb = NULL; + if (pci_is_bridge(pdev) && !pdev->subordinate->dev.of_node) { + + pr_debug("%s: %s: bus->dev=%s subordinate=%s\n", __func__, + kobject_name(&dev->kobj), + kobject_name(&pdev->bus->dev.kobj), + kobject_name(&pdev->subordinate->dev.kobj)); + + npb = of_changeset_create_device_node(&cset, bus_dev->of_node, + "%s/pci-%04x-%02x", + of_node_full_name(bus_dev->of_node), + pci_domain_nr(pdev->subordinate), + pdev->subordinate->number); + if (IS_ERR(npb)) { + ret = PTR_ERR(npb); + goto out_cset_fail; + } + + ret = of_changeset_add_property_string(&cset, npb, "compatible", "generic,pci-bus"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_string(&cset, npb, "device_type", "pci"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_string(&cset, npb, "status", "okay"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_add_property_bool(&cset, npb, "auto-generated"); + if (ret != 0) + goto out_cset_fail; + + ret = of_changeset_attach_node(&cset, npb); + if (ret != 0) + goto out_cset_fail; + } + + ret = of_changeset_apply(&cset); + if (ret != 0) + goto out_cset_fail; + + /* permanently commit */ + of_changeset_destroy(&cset); + + /* bind the node to the device */ + dev->of_node = np; + ret = sysfs_create_link(&dev->kobj, &dev->of_node->kobj, + "of_node"); + if (ret) + pr_warn("%s: %s Error %d creating of_node link\n", + __func__, kobject_name(&dev->kobj), ret); + + if (npb) { + pdev->subordinate->dev.of_node = npb; + ret = sysfs_create_link(&pdev->subordinate->dev.kobj, &npb->kobj, + "of_node"); + if (ret) + pr_warn("%s: %s Error %d creating of_node link\n", + __func__, kobject_name(&dev->kobj), ret); + } + + + return 0; + +out_cset_fail: + pr_err("%s: %s Failed to apply changeset (err=%d)\n", __func__, + kobject_name(&dev->kobj), ret); + of_changeset_destroy(&cset); + return ret; +} + +static int pci_dev_uninstantiate(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np, *npb; + struct of_changeset cset; + int ret; + + /* device node must exist */ + np = dev->of_node; + if (!np) + return 0; + + /* and the auto-generated property */ + if (!of_property_read_bool(np, "auto-generated")) + return 0; + + of_changeset_init(&cset); + + ret = of_changeset_detach_node(&cset, np); + if (ret != 0) + goto out_cset_fail; + + npb = NULL; + if (pci_is_bridge(pdev)) + npb = pdev->subordinate->dev.of_node; + + if (npb != NULL) { + ret = of_changeset_detach_node(&cset, npb); + if (ret != 0) + goto out_cset_fail; + } + + ret = of_changeset_apply(&cset); + if (ret != 0) + goto out_cset_fail; + + dev->of_node = NULL; + if (npb != NULL) + pdev->subordinate->dev.of_node = NULL; + + pr_debug("%s: %s: %02x:%02x.%02x\n", __func__, + kobject_name(&dev->kobj), + pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + /* TODO iterate over the properties and free */ + + return 0; + +out_cset_fail: + of_changeset_destroy(&cset); + + return ret; +} + +static int dovmgr_pci_notify(struct notifier_block *nb, + unsigned long action, void *arg) +{ + int ret; + + if (action == BUS_NOTIFY_ADD_DEVICE) + pci_dev_instantiate(to_pci_dev(arg)); + + ret = dovmgr_notifier_action(&dovmgr_pci_group, action, arg, + dovmgr_pci_item_match, dovmgr_item_notify); + + if (action == BUS_NOTIFY_REMOVED_DEVICE) + pci_dev_uninstantiate(to_pci_dev(arg)); + + return ret; +} + +static struct notifier_block dovmgr_pci_notifier = { + .notifier_call = dovmgr_pci_notify, +}; + +static int pci_instantiate_iterator(struct device *dev, void *data) +{ + return pci_dev_instantiate(to_pci_dev(dev)); +} + +static int dovmgr_pci_init(void) +{ + int ret; + + config_group_init_type_name(&dovmgr_pci_group, "pci", &dovmgr_pci_type); + ret = bus_register_notifier(&pci_bus_type, &dovmgr_pci_notifier); + if (ret != 0) { + pr_err("%s: bus_register_notifier() failed\n", __func__); + return ret; + } + + ret = bus_for_each_dev(&pci_bus_type, NULL, NULL, + pci_instantiate_iterator); + if (ret != 0) { + pr_err("%s: bus_for_each_dev() failed\n", __func__); + return ret; + } + + return 0; +} + +static void dovmgr_pci_cleanup(void) +{ + bus_unregister_notifier(&pci_bus_type, &dovmgr_pci_notifier); +} +#endif + +#if IS_ENABLED(CONFIG_USB) +static int dovmgr_usb_notify(struct notifier_block *nb, + unsigned long action, void *arg) +{ + return dovmgr_notifier_action(&dovmgr_usb_group, action, arg, + dovmgr_usb_item_match, dovmgr_item_notify); +} + +static struct notifier_block dovmgr_usb_notifier = { + .notifier_call = dovmgr_usb_notify, +}; + +static int dovmgr_usb_init(void) +{ + int ret; + + config_group_init_type_name(&dovmgr_usb_group, "usb", &dovmgr_usb_type); + ret = bus_register_notifier(&usb_bus_type, &dovmgr_usb_notifier); + if (ret != 0) { + pr_err("%s: bus_register_notifier() failed\n", __func__); + return ret; + } + return 0; +} + +static void dovmgr_usb_cleanup(void) +{ + bus_unregister_notifier(&usb_bus_type, &dovmgr_usb_notifier); +} +#endif + +static int __init dovmgr_init(void) +{ + int ret; + + config_group_init(&dovmgr_subsys.su_group); + +#if IS_ENABLED(CONFIG_PCI) + ret = dovmgr_pci_init(); + if (ret != 0) + goto err_no_pci_init; +#endif +#if IS_ENABLED(CONFIG_USB) + ret = dovmgr_usb_init(); + if (ret != 0) + goto err_no_usb_init; +#endif + + ret = configfs_register_subsystem(&dovmgr_subsys); + if (ret != 0) { + pr_err("%s: failed to register subsys\n", __func__); + goto err_no_configfs; + } + pr_info("%s: OK\n", __func__); + return 0; + +err_no_configfs: +#if IS_ENABLED(CONFIG_USB) + dovmgr_usb_cleanup(); +err_no_usb_init: +#endif +#if IS_ENABLED(CONFIG_PCI) + dovmgr_pci_cleanup(); +err_no_pci_init: +#endif + return ret; +} +late_initcall(dovmgr_init); diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 9536852fd4c68..04f2e1fa9dd15 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -96,17 +96,4 @@ config EEPROM_DIGSY_MTC_CFG If unsure, say N. -config EEPROM_SUNXI_SID - tristate "Allwinner sunxi security ID support" - depends on ARCH_SUNXI && SYSFS - help - This is a driver for the 'security ID' available on various Allwinner - devices. - - Due to the potential risks involved with changing e-fuses, - this driver is read-only. - - This driver can also be built as a module. If so, the module - will be called sunxi_sid. - endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index 9507aec95e948..fc1e81d292673 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -4,5 +4,4 @@ obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o obj-$(CONFIG_EEPROM_MAX6875) += max6875.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o -obj-$(CONFIG_EEPROM_SUNXI_SID) += sunxi_sid.o obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 2d3db81be0990..004dfdbc3229e 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -3,6 +3,7 @@ * * Copyright (C) 2005-2007 David Brownell * Copyright (C) 2008 Wolfram Sang, Pengutronix + * Copyright (C) 2015 Pantelis Antoniou, Konsulko Group * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,6 +24,9 @@ #include #include #include +#include +#include +#include /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. @@ -63,12 +67,16 @@ struct at24_data { * but not from changes by other I2C masters. */ struct mutex lock; - struct bin_attribute bin; u8 *writebuf; unsigned write_max; unsigned num_addresses; + struct regmap_config *regmap_config; + struct regmap *regmap; + struct nvmem_config *nvmem_config; + struct nvmem_device *nvmem_dev; + /* * Some chips tie up multiple I2C addresses; dummy devices reserve * them for us, and we'll use them with SMBus calls. @@ -131,6 +139,8 @@ static const struct i2c_device_id at24_ids[] = { }; MODULE_DEVICE_TABLE(i2c, at24_ids); +static DEFINE_IDA(at24_ida); + /*-------------------------------------------------------------------------*/ /* @@ -301,17 +311,6 @@ static ssize_t at24_read(struct at24_data *at24, return retval; } -static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - return at24_read(at24, buf, off, count); -} - - /* * Note that if the hardware write-protect pin is pulled high, the whole * chip is normally write protected. But there are plenty of product @@ -432,21 +431,10 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, return retval; } -static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - if (unlikely(off >= attr->size)) - return -EFBIG; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - return at24_write(at24, buf, off, count); -} - /*-------------------------------------------------------------------------*/ +/* panto: using the EEPROM framework macc is superfluous */ + /* * This lets other kernel code access the eeprom data. For example, it * might hold a board's Ethernet address, or board-specific calibration @@ -492,6 +480,91 @@ static void at24_get_ofdata(struct i2c_client *client, { } #endif /* CONFIG_OF */ +static int regmap_at24_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct i2c_client *client = context; + struct at24_data *at24; + unsigned int offset; + int ret; + + /* reg bits is hardcoded to 32 bits */ + BUG_ON(reg_size != 4); + offset = __raw_readl(reg); + + at24 = i2c_get_clientdata(client); + if (at24 == NULL) + return -ENODEV; + + /* val bytes is always 1 */ + BUG_ON(at24->regmap_config->val_bits != 8); + + ret = at24_read(at24, val, offset, val_size); + if (ret < 0) + return ret; + if (ret != val_size) + return -EINVAL; + + return 0; +} + +static int regmap_at24_gather_write(void *context, + const void *reg, size_t reg_size, + const void *val, size_t val_size) +{ + struct i2c_client *client = context; + struct at24_data *at24; + unsigned int offset; + int ret; + + at24 = i2c_get_clientdata(client); + if (at24 == NULL) + return -ENODEV; + + BUG_ON(reg_size != 4); + offset = __raw_readl(reg); + + /* val bytes is always 1 */ + BUG_ON(at24->regmap_config->val_bits != 8); + + ret = at24_write(at24, val, offset, val_size); + if (ret < 0) + return ret; + if (ret != val_size) + return -EINVAL; + + return 0; +} + +static int regmap_at24_write(void *context, const void *data, size_t count) +{ + struct i2c_client *client = context; + struct at24_data *at24; + unsigned int reg_bytes, offset; + + at24 = i2c_get_clientdata(client); + if (at24 == NULL) + return -ENODEV; + + reg_bytes = at24->regmap_config->reg_bits / 8; + offset = reg_bytes; + + BUG_ON(reg_bytes != 4); + BUG_ON(count <= offset); + + return regmap_at24_gather_write(context, data, reg_bytes, + data + offset, count - offset); +} + +static struct regmap_bus regmap_at24_bus = { + .read = regmap_at24_read, + .write = regmap_at24_write, + .gather_write = regmap_at24_gather_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct at24_platform_data chip; @@ -502,6 +575,10 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) int err; unsigned i, num_addresses; kernel_ulong_t magic; + struct regmap_config *regmap_config; + struct regmap *regmap; + struct nvmem_config *nvmem_config; + struct nvmem_device *nvmem_dev; if (client->dev.platform_data) { chip = *(struct at24_platform_data *)client->dev.platform_data; @@ -569,16 +646,75 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) } } + regmap_config = devm_kzalloc(&client->dev, sizeof(*regmap_config), + GFP_KERNEL); + if (IS_ERR(regmap_config)) { + err = PTR_ERR(regmap_config); + dev_err(&client->dev, "%s: regmap_config allocation failed (%d)\n", + __func__, err); + return err; + } + + /* use 32 bits as registers, they don't appear on the wire anyway */ + regmap_config->reg_bits = 32; + regmap_config->val_bits = 8; + regmap_config->cache_type = REGCACHE_NONE; + regmap_config->max_register = chip.byte_len; + if (chip.flags & AT24_FLAG_TAKE8ADDR) num_addresses = 8; else num_addresses = DIV_ROUND_UP(chip.byte_len, (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + /* we can't use devm_regmap_init_i2c due to the many i2c clients */ + regmap = devm_regmap_init(&client->dev, ®map_at24_bus, + client, regmap_config); + if (IS_ERR(regmap)) { + err = PTR_ERR(regmap); + dev_err(&client->dev, "%s: regmap allocation failed (%d)\n", + __func__, err); + return err; + } + + nvmem_config = devm_kzalloc(&client->dev, sizeof(*nvmem_config), + GFP_KERNEL); + if (IS_ERR(nvmem_config)) { + err = PTR_ERR(nvmem_config); + dev_err(&client->dev, "%s: nvmem_config allocation failed (%d)\n", + __func__, err); + return err; + } + nvmem_config->dev = &client->dev; + nvmem_config->name = "at24-"; + nvmem_config->id = ida_simple_get(&at24_ida, 0, 0, GFP_KERNEL); + nvmem_config->owner = THIS_MODULE; + if (nvmem_config->id < 0) { + err = nvmem_config->id; + dev_err(&client->dev, "%s: eeprom id allocation failed (%d)\n", + __func__, err); + return err; + } + + nvmem_dev = nvmem_register(nvmem_config); + if (IS_ERR(nvmem_dev)) { + err = PTR_ERR(nvmem_dev); + dev_err(&client->dev, "%s: nvmem_register failed (%d)\n", + __func__, err); + goto err_out; + } + at24 = devm_kzalloc(&client->dev, sizeof(struct at24_data) + num_addresses * sizeof(struct i2c_client *), GFP_KERNEL); - if (!at24) - return -ENOMEM; + if (!at24) { + err = -ENOMEM; + goto err_out; + } + + at24->regmap = regmap; + at24->regmap_config = regmap_config; + at24->nvmem_config = nvmem_config; + at24->nvmem_dev = nvmem_dev; mutex_init(&at24->lock); at24->use_smbus = use_smbus; @@ -586,16 +722,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->chip = chip; at24->num_addresses = num_addresses; - /* - * Export the EEPROM bytes through sysfs, since that's convenient. - * By default, only root should see the data (maybe passwords etc) - */ - sysfs_bin_attr_init(&at24->bin); - at24->bin.attr.name = "eeprom"; - at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; - at24->bin.read = at24_bin_read; - at24->bin.size = chip.byte_len; - at24->macc.read = at24_macc_read; writable = !(chip.flags & AT24_FLAG_READONLY); @@ -606,9 +732,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->macc.write = at24_macc_write; - at24->bin.write = at24_bin_write; - at24->bin.attr.mode |= S_IWUSR; - if (write_max > io_limit) write_max = io_limit; if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) @@ -618,8 +741,10 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) /* buffer (data + address at the beginning) */ at24->writebuf = devm_kzalloc(&client->dev, write_max + 2, GFP_KERNEL); - if (!at24->writebuf) - return -ENOMEM; + if (!at24->writebuf) { + err = -ENOMEM; + goto err_out; + } } else { dev_warn(&client->dev, "cannot write due to controller restrictions."); @@ -640,14 +765,10 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) } } - err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); - if (err) - goto err_clients; - i2c_set_clientdata(client, at24); dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n", - at24->bin.size, client->name, + at24->chip.byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); if (use_smbus == I2C_SMBUS_WORD_DATA || use_smbus == I2C_SMBUS_BYTE_DATA) { @@ -663,10 +784,14 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) return 0; err_clients: + for (i = 1; i < num_addresses; i++) if (at24->client[i]) i2c_unregister_device(at24->client[i]); +err_out: + ida_simple_remove(&at24_ida, nvmem_config->id); + return err; } @@ -676,11 +801,12 @@ static int at24_remove(struct i2c_client *client) int i; at24 = i2c_get_clientdata(client); - sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); for (i = 1; i < at24->num_addresses; i++) i2c_unregister_device(at24->client[i]); + nvmem_unregister(at24->nvmem_dev); + return 0; } diff --git a/drivers/misc/eeprom/sunxi_sid.c b/drivers/misc/eeprom/sunxi_sid.c deleted file mode 100644 index 8385177ff32b0..0000000000000 --- a/drivers/misc/eeprom/sunxi_sid.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Copyright (c) 2013 Oliver Schinagl - * http://www.linux-sunxi.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * This driver exposes the Allwinner security ID, efuses exported in byte- - * sized chunks. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "sunxi-sid" - -struct sunxi_sid_data { - void __iomem *reg_base; - unsigned int keysize; -}; - -/* We read the entire key, due to a 32 bit read alignment requirement. Since we - * want to return the requested byte, this results in somewhat slower code and - * uses 4 times more reads as needed but keeps code simpler. Since the SID is - * only very rarely probed, this is not really an issue. - */ -static u8 sunxi_sid_read_byte(const struct sunxi_sid_data *sid_data, - const unsigned int offset) -{ - u32 sid_key; - - if (offset >= sid_data->keysize) - return 0; - - sid_key = ioread32be(sid_data->reg_base + round_down(offset, 4)); - sid_key >>= (offset % 4) * 8; - - return sid_key; /* Only return the last byte */ -} - -static ssize_t sid_read(struct file *fd, struct kobject *kobj, - struct bin_attribute *attr, char *buf, - loff_t pos, size_t size) -{ - struct platform_device *pdev; - struct sunxi_sid_data *sid_data; - int i; - - pdev = to_platform_device(kobj_to_dev(kobj)); - sid_data = platform_get_drvdata(pdev); - - if (pos < 0 || pos >= sid_data->keysize) - return 0; - if (size > sid_data->keysize - pos) - size = sid_data->keysize - pos; - - for (i = 0; i < size; i++) - buf[i] = sunxi_sid_read_byte(sid_data, pos + i); - - return i; -} - -static struct bin_attribute sid_bin_attr = { - .attr = { .name = "eeprom", .mode = S_IRUGO, }, - .read = sid_read, -}; - -static int sunxi_sid_remove(struct platform_device *pdev) -{ - device_remove_bin_file(&pdev->dev, &sid_bin_attr); - dev_dbg(&pdev->dev, "driver unloaded\n"); - - return 0; -} - -static const struct of_device_id sunxi_sid_of_match[] = { - { .compatible = "allwinner,sun4i-a10-sid", .data = (void *)16}, - { .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512}, - {/* sentinel */}, -}; -MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); - -static int sunxi_sid_probe(struct platform_device *pdev) -{ - struct sunxi_sid_data *sid_data; - struct resource *res; - const struct of_device_id *of_dev_id; - u8 *entropy; - unsigned int i; - - sid_data = devm_kzalloc(&pdev->dev, sizeof(struct sunxi_sid_data), - GFP_KERNEL); - if (!sid_data) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - sid_data->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(sid_data->reg_base)) - return PTR_ERR(sid_data->reg_base); - - of_dev_id = of_match_device(sunxi_sid_of_match, &pdev->dev); - if (!of_dev_id) - return -ENODEV; - sid_data->keysize = (int)of_dev_id->data; - - platform_set_drvdata(pdev, sid_data); - - sid_bin_attr.size = sid_data->keysize; - if (device_create_bin_file(&pdev->dev, &sid_bin_attr)) - return -ENODEV; - - entropy = kzalloc(sizeof(u8) * sid_data->keysize, GFP_KERNEL); - for (i = 0; i < sid_data->keysize; i++) - entropy[i] = sunxi_sid_read_byte(sid_data, i); - add_device_randomness(entropy, sid_data->keysize); - kfree(entropy); - - dev_dbg(&pdev->dev, "loaded\n"); - - return 0; -} - -static struct platform_driver sunxi_sid_driver = { - .probe = sunxi_sid_probe, - .remove = sunxi_sid_remove, - .driver = { - .name = DRV_NAME, - .of_match_table = sunxi_sid_of_match, - }, -}; -module_platform_driver(sunxi_sid_driver); - -MODULE_AUTHOR("Oliver Schinagl "); -MODULE_DESCRIPTION("Allwinner sunxi security id driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/misc/tieqep.c b/drivers/misc/tieqep.c new file mode 100644 index 0000000000000..d4698c2e8188d --- /dev/null +++ b/drivers/misc/tieqep.c @@ -0,0 +1,744 @@ +/* + * TI eQEP driver for AM33xx devices + * + * Copyright (C) 2013 Nathaniel R. Lewis - http://teknoman117.wordpress.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * sysfs entries + * - position = absolute - current position; relative - last latched value + * - mode => 0 - absolute; 1 - relative + * - period => sampling period for the hardware + * - enable => 0 - eQEP disabled, 1 - eQEP enabled + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +// Include the PWMSS subsystem headers, because this unit controls +// whether our clock source is enabled, and if eQEP is to be +// enabled, we need to start the clock +#include "../pwm/pwm-tipwmss.h" + +// eQEP register offsets from its base IO address +#define QPOSCNT 0x0000 +#define QPOSINIT 0x0004 +#define QPOSMAX 0x0008 +#define QPOSCMP 0x000C +#define QPOSILAT 0x0010 +#define QPOSSLAT 0x0014 +#define QPOSLAT 0x0018 +#define QUTMR 0x001C +#define QUPRD 0x0020 +#define QWDTMR 0x0024 +#define QWDPRD 0x0026 +#define QDECCTL 0x0028 +#define QEPCTL 0x002A +#define QCAPCTL 0x002C +#define QPOSCTL 0x002E +#define QEINT 0x0030 +#define QFLG 0x0032 +#define QCLR 0x0034 +#define QFRC 0x0036 +#define QEPSTS 0x0038 +#define QCTMR 0x003A +#define QCPRD 0x003C +#define QCTMRLAT 0x003E +#define QCPRDLAT 0x0040 +#define QREVID 0x005C + +// Bits for the QDECTL register +#define QSRC1 (0x0001 << 15) +#define QSRC0 (0x0001 << 14) +#define SOEN (0x0001 << 13) +#define SPSEL (0x0001 << 12) +#define XCR (0x0001 << 11) +#define SWAP (0x0001 << 10) +#define IGATE (0x0001 << 9) +#define QAP (0x0001 << 8) +#define QBP (0x0001 << 7) +#define QIP (0x0001 << 6) +#define QSP (0x0001 << 5) + +// Bits for the QEPCTL register +#define FREESOFT1 (0x0001 << 15) +#define FREESOFT0 (0x0001 << 14) +#define PCRM1 (0x0001 << 13) +#define PCRM0 (0x0001 << 12) +#define SEI1 (0x0001 << 11) +#define SEI0 (0x0001 << 10) +#define IEI1 (0x0001 << 9) +#define IEI0 (0x0001 << 8) +#define SWI (0x0001 << 7) +#define SEL (0x0001 << 6) +#define IEL1 (0x0001 << 5) +#define IEL0 (0x0001 << 4) +#define PHEN (0x0001 << 3) +#define QCLM (0x0001 << 2) +#define UTE (0x0001 << 1) +#define WDE (0x0001 << 0) + +// Bits for the QCAPCTL register +#define CEN (0x0001 << 15) +#define CCPS2 (0x0001 << 6) +#define CCPS0 (0x0001 << 5) +#define CCPS1 (0x0001 << 4) +#define UPPS3 (0x0001 << 3) +#define UPPS2 (0x0001 << 2) +#define UPPS1 (0x0001 << 1) +#define UPPS0 (0x0001 << 0) + +// Bits for the QPOSCTL register +#define PCSHDW (0x0001 << 15) +#define PCLOAD (0x0001 << 14) +#define PCPOL (0x0001 << 13) +#define PCE (0x0001 << 12) +#define PCSPW11 (0x0001 << 11) +#define PCSPW10 (0x0001 << 10) +#define PCSPW9 (0x0001 << 9) +#define PCSPW8 (0x0001 << 8) +#define PCSPW7 (0x0001 << 7) +#define PCSPW6 (0x0001 << 6) +#define PCSPW5 (0x0001 << 5) +#define PCSPW4 (0x0001 << 4) +#define PCSPW3 (0x0001 << 3) +#define PCSPW2 (0x0001 << 2) +#define PCSPW1 (0x0001 << 1) +#define PCSPW0 (0x0001 << 0) + +// Bits for the interrupt registers +#define EQEP_INTERRUPT_MASK (0x0FFF) +#define UTOF (0x0001 << 11) + +// Bits to control the clock in the PWMSS subsystem +#define PWMSS_EQEPCLK_EN BIT(4) +#define PWMSS_EQEPCLK_STOP_REQ BIT(5) +#define PWMSS_EQEPCLK_EN_ACK BIT(4) + +// Modes for the eQEP unit +// Absolute - the position entry represents the current position of the encoder. +// Poll this value and it will be notified every period nanoseconds +// Relative - the position entry represents the last latched position of the encoder +// This value is latched every period nanoseconds and the internal counter +// is subsequenty reset +#define TIEQEP_MODE_ABSOLUTE 0 +#define TIEQEP_MODE_RELATIVE 1 + +// Structure defining the characteristics of the eQEP unit +struct eqep_chip +{ + // Platform device for this eQEP unit + struct platform_device *pdev; + + // Pointer to the base of the memory of the eQEP unit + void __iomem *mmio_base; + + // SYSCLKOUT to the eQEP unit + u32 clk_rate; + + // IRQ for the eQEP unit + u16 irq; + + // Mode of the eQEP unit + u8 mode; + + // work stuct for the notify userspace work + struct work_struct notify_work; + + // Backup for driver suspension + u16 prior_qepctl; + u16 prior_qeint; +}; + +// Notify userspace work +void notify_handler (struct work_struct *work) +{ + // Get a reference to the eQEP driver + struct eqep_chip *eqep = container_of(work, struct eqep_chip, notify_work); + + // Notify the userspace + sysfs_notify(&eqep->pdev->dev.kobj, NULL, "position"); +} + +// eQEP Interrupt handler +static irqreturn_t eqep_irq_handler(int irq, void *dev_id) +{ + // Get the instance information + struct platform_device *pdev = dev_id; + struct eqep_chip *eqep = platform_get_drvdata(pdev); + + // Get the interrupt flags + u16 iflags = readw(eqep->mmio_base + QFLG) & EQEP_INTERRUPT_MASK; + + // Check the interrupt source(s) + if(iflags & UTOF) + { + // Handle the unit timer overflow interrupt by notifying any potential pollers + schedule_work(&eqep->notify_work); + } + + // Clear interrupt flags (write back triggered flags to the clear register) + writew(iflags, eqep->mmio_base + QCLR); + + // Return that the IRQ was handled successfully + return IRQ_HANDLED; +} + +// Function to read whether the eQEP unit is enabled or disabled +static ssize_t eqep_get_enabled(struct device *dev, struct device_attribute *attr, char *buf) +{ + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Read the qep control register and mask all but the enabled bit + u16 enabled = readw(eqep->mmio_base + QEPCTL) & PHEN; + + // Return the target in string format + return sprintf(buf, "%u\n", (enabled) ? 1 : 0); +} + +// Function to set if the eQEP is enabled +static ssize_t eqep_set_enabled(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + // Get the instance structure + int rc; + u16 val; + u8 enabled; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Convert the input string to an 8 bit uint + if ((rc = kstrtou8(buf, 0, &enabled))) + return rc; + + // Get the existing state of QEPCTL + val = readw(eqep->mmio_base + QEPCTL); + + // If we passed a number that is not 0, enable the eQEP + if(enabled) + { + // Enable the eQEP (Set PHEN in QEPCTL) + val = val | PHEN; + } else + { + // Disable the eQEP (Clear PHEN in QEPCTL) + val = val & ~PHEN; + } + + // Write flags back to control register + writew(val, eqep->mmio_base + QEPCTL); + + // Return buffer length consumed (all) + return count; +} + +// Function to read the current position of the eQEP +static ssize_t eqep_get_position(struct device *dev, struct device_attribute *attr, char *buf) +{ + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // A variable to return the position with + s32 position = 0; + + // Check the mode + if(eqep->mode == TIEQEP_MODE_ABSOLUTE) + { + // If we are in absolute mode, we need the current value of the eQEP hardware + position = readl(eqep->mmio_base + QPOSCNT); + } else if(eqep->mode == TIEQEP_MODE_RELATIVE) + { + // If we are in relative mode, we need the last latched value of the eQEP hardware + position = readl(eqep->mmio_base + QPOSLAT); + } + + // Return the target in string format + return sprintf(buf, "%d\n", position); +} + +// Function to set the position of the eQEP hardware +static ssize_t eqep_set_position(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + // Get the instance structure + int rc; + s32 position; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Convert the input string to an 8 bit uint + if ((rc = kstrtos32(buf, 0, &position))) + return rc; + + // If we are in absolute mode, set the position of the encoder, discard relative mode because thats pointless + if(eqep->mode == TIEQEP_MODE_ABSOLUTE) + { + // If we are in absolute mode, we need the current value of the eQEP hardware + writel(position, eqep->mmio_base + QPOSCNT); + } + + // Return buffer length consumed (all) + return count; +} + +// Function to read the period of the unit time event timer +static ssize_t eqep_get_timer_period(struct device *dev, struct device_attribute *attr, char *buf) +{ + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + u64 period = 0; + + // Check if the period timer is enabled, if not, return 0 + if(!(readw(eqep->mmio_base + QEPCTL) & UTE)) + { + return sprintf(buf, "0\n"); + } + + // Convert from counts per interrupt back into period_ns + period = readl(eqep->mmio_base + QUPRD); + period = period * NSEC_PER_SEC; + do_div(period, eqep->clk_rate); + + // Otherwise write out the data + return sprintf(buf, "%llu\n", period); +} + +// Function to set the unit timer period. 0 = off, greater than zero sets the period +static ssize_t eqep_set_timer_period(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + u16 tmp; + u64 period; + + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Convert the passed string to a 64 bit uint + if((rc = kstrtou64(buf, 0, &period))) + return rc; + + // Disable the unit timer before modifying its period register + tmp = readw(eqep->mmio_base + QEPCTL); + tmp = tmp & ~UTE & ~QCLM; + writew(tmp, eqep->mmio_base + QEPCTL); + + // Zero the unit timer counter register + writel(0x0, eqep->mmio_base + QUTMR); + + // If we want the timer enabled (a period that is non zero has been passed) + if(period) + { + // Otherwise calculate the period + period = period * eqep->clk_rate; + do_div(period, NSEC_PER_SEC); + + // Set this period into the unit timer period register + writel(period & 0x00000000FFFFFFFF, eqep->mmio_base + QUPRD); + + // Enable the unit timer, and latch QPOSLAT to QPOSCNT on overflow + tmp = readw(eqep->mmio_base + QEPCTL); + tmp = tmp | UTE | QCLM; + writew(tmp, eqep->mmio_base + QEPCTL); + } + + // Return consumed buffer count + return count; +} + +// Function to read the mode of the eQEP hardware +static ssize_t eqep_get_mode(struct device *dev, struct device_attribute *attr, char *buf) +{ + // Get the instance structure + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Return the mode + return sprintf(buf, "%u\n", eqep->mode); +} + +// Function to set the mode of the eQEP hardware +static ssize_t eqep_set_mode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + // Get the instance structure + int rc; + u16 val; + u8 tmp_mode; + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Convert the input string to an 8 bit uint + if ((rc = kstrtou8(buf, 0, &tmp_mode))) + return rc; + + // Get the existing state of QEPCTL + val = readw(eqep->mmio_base + QEPCTL); + + // Check the mode that was passed + if(tmp_mode == TIEQEP_MODE_ABSOLUTE) + { + // In absolute mode, we don't want to reset the intenal hardware based on time, + // so disable the unit timer position reset (Set PCRM[1:0] = 0) + val = val & ~PCRM1 & ~PCRM0; + + // Store the mode as absolute + eqep->mode = TIEQEP_MODE_ABSOLUTE; + } else if(tmp_mode == TIEQEP_MODE_RELATIVE) + { + // In relative mode, we want to latch the value of the eQEP hardware on the + // overflow of the unit timer. So enable the unit timer position reset + // (Set PCRM[1:0] = 3) + val = val | PCRM1 | PCRM0; + + // Store the mode as relative + eqep->mode = TIEQEP_MODE_RELATIVE; + } + + // Write the new value back to the control register + writew(val, eqep->mmio_base + QEPCTL); + + // Return buffer length consumed (all) + return count; +} + +// Bind read/write functions to sysfs entries +static DEVICE_ATTR(enabled, 0644, eqep_get_enabled, eqep_set_enabled); +static DEVICE_ATTR(position, 0644, eqep_get_position, eqep_set_position); +static DEVICE_ATTR(period, 0644, eqep_get_timer_period, eqep_set_timer_period); +static DEVICE_ATTR(mode, 0644, eqep_get_mode, eqep_set_mode); + +// Array holding all of the sysfs entries +static const struct attribute *eqep_attrs[] = { + &dev_attr_enabled.attr, + &dev_attr_position.attr, + &dev_attr_period.attr, + &dev_attr_mode.attr, + NULL, +}; + +// Driver function group +static const struct attribute_group eqep_device_attr_group = { + .attrs = (struct attribute **) eqep_attrs, +}; + +// Driver compatibility list +static struct of_device_id eqep_of_match[] = +{ + { .compatible = "ti,am33xx-eqep" }, + { } +}; + +// Register our compatibilities for device trees +MODULE_DEVICE_TABLE(of, eqep_of_match); + +// Create an instance of the eQEP driver +static int eqep_probe(struct platform_device *pdev) +{ + struct resource *r; + struct clk *clk; + struct eqep_chip *eqep; + struct pinctrl *pinctrl; + int ret; + u64 period; + u16 status; + u32 value; + + // Select any default pins possible provided through the device tree + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + { + dev_warn(&pdev->dev, "unable to select pin group\n"); + } + + // Allocate a eqep_driver object + eqep = devm_kzalloc(&pdev->dev, sizeof(struct eqep_chip), GFP_KERNEL); + if (!eqep) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + // Get a handle to the system clock object + clk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + return PTR_ERR(clk); + } + + // Get the frequency of the system clock + eqep->clk_rate = clk_get_rate(clk); + if (!eqep->clk_rate) { + dev_err(&pdev->dev, "failed to get clock rate\n"); + return -EINVAL; + } + + // Get a resource containing the IRQ for this eQEP controller + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(!r)) { + dev_err(&pdev->dev, "Invalid IRQ resource\n"); + return -ENODEV; + } + + // Store the irq + eqep->irq = r->start; + + // Get a resource containing the requested (from DT) memory address and range of eQEP controller + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + // Remap the eQEP controller memory into our own memory space + eqep->mmio_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(eqep->mmio_base)) + return PTR_ERR(eqep->mmio_base); + + // Store the platform device in our eQEP data structure for later usage + eqep->pdev = pdev; + + // Subscribe to the eQEP interrupt + if (request_irq(eqep->irq, eqep_irq_handler, IRQF_IRQPOLL, "eqep_interrupt", pdev)) + { + dev_err(&pdev->dev, "unable to request irq for eQEP\n"); + return -ENODEV; + } + + // Register controls to sysfs + if (sysfs_create_group(&pdev->dev.kobj, &eqep_device_attr_group)) + { + dev_err(&pdev->dev, "sysfs creation failed\n"); + return -EINVAL; + } + + // Read decoder control settings + status = readw(eqep->mmio_base + QDECCTL); + + // Quadrature mode or direction mode + if(of_property_read_u32(pdev->dev.of_node, "count_mode", &value)) + status = status & ~QSRC1 & ~QSRC0; + else + status = ((value) ? status | QSRC0 : status & ~QSRC0) & ~QSRC1; + + // Should we invert the qa input + if(of_property_read_u32(pdev->dev.of_node, "invert_qa", &value)) + status = status & ~QAP; + else + status = (value) ? status | QAP : status & ~QAP; + + // Should we invert the qb input + if(of_property_read_u32(pdev->dev.of_node, "invert_qb", &value)) + status = status & ~QBP; + else + status = (value) ? status | QBP : status & ~QBP; + + // Should we invert the index input + if(of_property_read_u32(pdev->dev.of_node, "invert_qi", &value)) + status = status & ~QIP; + else + status = (value) ? status | QIP : status & ~QIP; + + // Should we invert the strobe input + if(of_property_read_u32(pdev->dev.of_node, "invert_qs", &value)) + status = status & ~QSP; + else + status = (value) ? status | QSP : status & ~QSP; + + // Should we swap the cha and chb inputs + if(of_property_read_u32(pdev->dev.of_node, "swap_inputs", &value)) + status = status & ~SWAP; + else + status = (value) ? status | SWAP : status & ~SWAP; + + // Write the decoder control settings back to the control register + writew(status, eqep->mmio_base + QDECCTL); + + // Initialize the position counter to zero + writel(0, eqep->mmio_base + QPOSINIT); + + // This is pretty ingenious if I do say so myself. The eQEP subsystem has a register + // that defined the maximum value of the encoder as an unsigned. If the counter is zero + // and decrements again, it is set to QPOSMAX. If you cast -1 (signed int) to + // to an unsigned, you will notice that -1 == UINT_MAX. So when the counter is set to this + // maximum position, when read into a signed int, it will equal -1. Two's complement for + // the WIN!! + writel(-1, eqep->mmio_base + QPOSMAX); + + // Enable some interrupts + status = readw(eqep->mmio_base + QEINT); + status = status | UTOF; + // UTOF - Unit Time Period interrupt. This is triggered when the unit timer period expires + // + writew(status, eqep->mmio_base + QEINT); + + // Calculate the timer ticks per second + period = 1000000000; + period = period * eqep->clk_rate; + do_div(period, NSEC_PER_SEC); + + // Set this period into the unit timer period register + writel(period & 0x00000000FFFFFFFF, eqep->mmio_base + QUPRD); + + // Enable the eQEP with basic position counting turned on + status = readw(eqep->mmio_base + QEPCTL); + status = status | PHEN | IEL0 | SWI | UTE | QCLM; + // PHEN - Quadrature position counter enable bit + // IEL0 - Latch QPOSILAT on index signal. This can be rising or falling, IEL[1:0] = 0 is reserved + // SWI - Software initialization of position count register. Basic set QPOSCNT <= QPOSINIT + // UTE - unit timer enable + // QCLM - latch QPOSLAT to QPOSCNT upon unit timer overflow + writew(status, eqep->mmio_base + QEPCTL); + + // We default to absolute mode + eqep->mode = TIEQEP_MODE_ABSOLUTE; + + // Enable the power management runtime + pm_runtime_enable(&pdev->dev); + + // Increment the device usage count and run pm_runtime_resume() + pm_runtime_get_sync(&pdev->dev); + + // Enable the clock to the eQEP unit + status = pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EQEPCLK_EN); + + // If we failed to enable the clocks, fail out + if (!(status & PWMSS_EQEPCLK_EN_ACK)) + { + dev_err(&pdev->dev, "PWMSS config space clock enable failed\n"); + ret = -EINVAL; + goto pwmss_clk_failure; + } + + // Initialize the notify work struture + INIT_WORK(&eqep->notify_work, notify_handler); + + // Decrement the device usage count (twice) and run pm_runtime_idle() if zero + pm_runtime_put_sync(&pdev->dev); + + // Set the platform driver data to the data object we've been creating for the eQEP unit + platform_set_drvdata(pdev, eqep); + + // Success! + //printk(KERN_INFO "EQEP irq = %d, system clock = %u\n", eqep->irq, eqep->clk_rate); + return 0; + + // If a failure occurred, stop the runtime power management +pwmss_clk_failure: + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + return ret; +} + +// Remove an instance of the eQEP driver +static int eqep_remove(struct platform_device *pdev) +{ + // Get the eQEP driver data from the platform device structure + struct eqep_chip *eqep = platform_get_drvdata(pdev); + + // Cancel work + cancel_work_sync(&eqep->notify_work); + + // Unmap from sysfs + sysfs_remove_group(&pdev->dev.kobj, &eqep_device_attr_group); + + // Release important assets + free_irq(eqep->irq, pdev); + + // Increment the device usage count and run pm_runtime_resume() + pm_runtime_get_sync(&pdev->dev); + + // Disable the eQEP clock + pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EQEPCLK_STOP_REQ); + + // Decrement the device usage count (twice) and run pm_runtime_idle() if zero + pm_runtime_put_sync(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); + + // Disable the runtime power management of this device + pm_runtime_disable(&pdev->dev); + + // Return success + return 0; +} + +// Power management suspend device +static int eqep_suspend(struct device *dev) +{ + // Get the eqep driver information + struct eqep_chip *eqep = dev_get_drvdata(dev); + u16 tmp; + + // Shut down interrupts + eqep->prior_qeint = readw(eqep->mmio_base + QEINT); + tmp = eqep->prior_qeint & ~UTOF; + // UTOF - Unit Time Period interrupt. + writew(tmp, eqep->mmio_base + QEINT); + + // Get the existing state of QEPCTL + eqep->prior_qepctl = readw(eqep->mmio_base + QEPCTL); + + // Disable eQEP controller + writew(eqep->prior_qepctl & ~PHEN, eqep->mmio_base + QEPCTL); + + // Decrement the device usage count and run pm_runtime_idle() if zero + pm_runtime_put_sync(dev); + + // Return success + return 0; +} + +// Power management wake device back up +static int eqep_resume(struct device *dev) +{ + // Get the eqep driver information + struct eqep_chip *eqep = dev_get_drvdata(dev); + + // Restore interrupt enabled register + writew(eqep->prior_qeint, eqep->mmio_base + QEINT); + + // Restore prior qep control register + writew(eqep->prior_qepctl, eqep->mmio_base + QEPCTL); + + // Increment the device usage count and run pm_runtime_resume() + pm_runtime_get_sync(dev); + + // Success + return 0; +} + +// create pm functions object +static SIMPLE_DEV_PM_OPS(eqep_pm_ops, eqep_suspend, eqep_resume); + +// Platform driver information +static struct platform_driver eqep_driver = { + .driver = { + .name = "eqep", + .owner = THIS_MODULE, + .pm = &eqep_pm_ops, + .of_match_table = eqep_of_match, + }, + .probe = eqep_probe, + .remove = eqep_remove, +}; + +// Register this platform driver +module_platform_driver(eqep_driver); + +// Module information +MODULE_DESCRIPTION("TI eQEP driver"); +MODULE_AUTHOR("Nathaniel R. Lewis"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index cc5539ec6fdfd..fff96026f55b5 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -117,7 +117,7 @@ do { \ #define CPDMA_TXCP 0x40 #define CPDMA_RXCP 0x60 -#define CPSW_POLL_WEIGHT 64 +#define CPSW_POLL_WEIGHT 16 #define CPSW_MIN_PACKET_SIZE 60 #define CPSW_MAX_PACKET_SIZE (1500 + 14 + 4 + 4) @@ -700,6 +700,7 @@ static void cpsw_tx_handler(void *token, int len, int status) cpts_tx_timestamp(priv->cpts, skb); ndev->stats.tx_packets++; ndev->stats.tx_bytes += len; + netdev_completed_queue(ndev,1,len); dev_kfree_skb_any(skb); } @@ -1329,6 +1330,8 @@ static int cpsw_ndo_open(struct net_device *ndev) cpsw_set_coalesce(ndev, &coal); } + netdev_reset_queue(ndev); + dev_info(priv->dev, "BQL enabled\n"); napi_enable(&priv->napi); cpdma_ctlr_start(priv->dma); cpsw_intr_enable(priv); @@ -1361,6 +1364,7 @@ static int cpsw_ndo_stop(struct net_device *ndev) netif_stop_queue(priv->ndev); napi_disable(&priv->napi); netif_carrier_off(priv->ndev); + netdev_reset_queue(priv->ndev); if (cpsw_common_res_usage_state(priv) <= 1) { cpts_unregister(priv->cpts); @@ -1381,6 +1385,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, { struct cpsw_priv *priv = netdev_priv(ndev); int ret; + int len; ndev->trans_start = jiffies; @@ -1395,9 +1400,11 @@ static netdev_tx_t cpsw_ndo_start_xmit(struct sk_buff *skb, skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; skb_tx_timestamp(skb); - + len = max(skb->len, CPSW_MIN_PACKET_SIZE); + netdev_sent_queue(ndev,len); ret = cpsw_tx_packet_submit(ndev, priv, skb); if (unlikely(ret != 0)) { + netdev_completed_queue(ndev,1,len); cpsw_err(priv, tx_err, "desc submit failed\n"); goto fail; } diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index c00084d689f3b..cfbe9a52df83a 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -102,6 +102,10 @@ struct davinci_mdio_data { bool skip_scan; }; +#if IS_ENABLED(CONFIG_OF) +static void davinci_mdio_update_dt_from_phymask(u32 phy_mask); +#endif + static void __davinci_mdio_reset(struct davinci_mdio_data *data) { u32 mdio_in, div, mdio_out_khz, access_time; @@ -158,6 +162,12 @@ static int davinci_mdio_reset(struct mii_bus *bus) /* restrict mdio bus to live phys only */ dev_info(data->dev, "detected phy mask %x\n", ~phy_mask); phy_mask = ~phy_mask; + + #if IS_ENABLED(CONFIG_OF) + if (of_machine_is_compatible("ti,am335x-bone")) + davinci_mdio_update_dt_from_phymask(phy_mask); + #endif + } else { /* desperately scan all phys */ dev_warn(data->dev, "no live phy, scanning all\n"); @@ -318,6 +328,93 @@ static int davinci_mdio_probe_dt(struct mdio_platform_data *data, return 0; } +static void davinci_mdio_update_dt_from_phymask(u32 phy_mask) +{ + int i, len, skip; + u32 addr; + __be32 *old_phy_p, *phy_id_p; + struct property *phy_id_property = NULL; + struct device_node *node_p, *slave_p; + + addr = 0; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + if ((phy_mask & (1 << i)) == 0) { + addr = (u32) i; + break; + } + } + + for_each_compatible_node(node_p, NULL, "ti,cpsw") { + for_each_node_by_name(slave_p, "slave") { + +#if IS_ENABLED(CONFIG_OF_OVERLAY) + skip = 1; + // Hack, the overlay fixup "slave" doesn't have phy-mode... + old_phy_p = (__be32 *) of_get_property(slave_p, "phy-mode", &len); + + if (len != (sizeof(__be32 *) * 1)) + { + skip = 0; + } + + if (skip) { +#endif + + old_phy_p = (__be32 *) of_get_property(slave_p, "phy_id", &len); + + if (len != (sizeof(__be32 *) * 2)) + goto err_out; + + if (old_phy_p) { + + phy_id_property = kzalloc(sizeof(*phy_id_property), GFP_KERNEL); + + if (! phy_id_property) + goto err_out; + + phy_id_property->length = len; + phy_id_property->name = kstrdup("phy_id", GFP_KERNEL); + phy_id_property->value = kzalloc(len, GFP_KERNEL); + + if (! phy_id_property->name) + goto err_out; + + if (! phy_id_property->value) + goto err_out; + + memcpy(phy_id_property->value, old_phy_p, len); + + phy_id_p = (__be32 *) phy_id_property->value + 1; + + *phy_id_p = cpu_to_be32(addr); + + of_update_property(slave_p, phy_id_property); + pr_info("davinci_mdio: dt: updated phy_id[%d] from phy_mask[%x]\n", addr, phy_mask); + + ++addr; + } +#if IS_ENABLED(CONFIG_OF_OVERLAY) + } +#endif + } + } + + return; + +err_out: + + if (phy_id_property) { + if (phy_id_property->name) + kfree(phy_id_property->name); + + if (phy_id_property->value) + kfree(phy_id_property->value); + + if (phy_id_property) + kfree(phy_id_property); + } +} #endif static int davinci_mdio_probe(struct platform_device *pdev) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 16604bdf5197e..a63ab2e831054 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -277,6 +277,7 @@ source "drivers/net/wireless/libertas/Kconfig" source "drivers/net/wireless/orinoco/Kconfig" source "drivers/net/wireless/p54/Kconfig" source "drivers/net/wireless/rt2x00/Kconfig" +source "drivers/net/wireless/mediatek/Kconfig" source "drivers/net/wireless/rtlwifi/Kconfig" source "drivers/net/wireless/ti/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 0c88916867187..6b9e729dd8acb 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -45,6 +45,8 @@ obj-$(CONFIG_IWLWIFI) += iwlwifi/ obj-$(CONFIG_IWLEGACY) += iwlegacy/ obj-$(CONFIG_RT2X00) += rt2x00/ +obj-$(CONFIG_WL_MEDIATEK) += mediatek/ + obj-$(CONFIG_P54_COMMON) += p54/ obj-$(CONFIG_ATH_CARDS) += ath/ diff --git a/drivers/net/wireless/mediatek/Kconfig b/drivers/net/wireless/mediatek/Kconfig new file mode 100644 index 0000000000000..cba300c6b5da5 --- /dev/null +++ b/drivers/net/wireless/mediatek/Kconfig @@ -0,0 +1,10 @@ +menuconfig WL_MEDIATEK + bool "Mediatek Wireless LAN support" + ---help--- + Enable community drivers for MediaTek WiFi devices. + Those drivers make use of the Linux mac80211 stack. + + +if WL_MEDIATEK +source "drivers/net/wireless/mediatek/mt7601u/Kconfig" +endif # WL_MEDIATEK diff --git a/drivers/net/wireless/mediatek/Makefile b/drivers/net/wireless/mediatek/Makefile new file mode 100644 index 0000000000000..9d5f182fd7fdc --- /dev/null +++ b/drivers/net/wireless/mediatek/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MT7601U) += mt7601u/ diff --git a/drivers/net/wireless/mediatek/mt7601u/Kconfig b/drivers/net/wireless/mediatek/mt7601u/Kconfig new file mode 100644 index 0000000000000..f46bed92796b9 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/Kconfig @@ -0,0 +1,6 @@ +config MT7601U + tristate "MediaTek MT7601U (USB) support" + depends on MAC80211 + depends on USB + ---help--- + This adds support for MT7601U-based wireless USB dongles. diff --git a/drivers/net/wireless/mediatek/mt7601u/Makefile b/drivers/net/wireless/mediatek/mt7601u/Makefile new file mode 100644 index 0000000000000..ea9ed8a5db4d3 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/Makefile @@ -0,0 +1,9 @@ +ccflags-y += -D__CHECK_ENDIAN__ + +obj-$(CONFIG_MT7601U) += mt7601u.o + +mt7601u-objs = \ + usb.o init.o main.o mcu.o trace.o dma.o core.o eeprom.o phy.o \ + mac.o util.o debugfs.o tx.o + +CFLAGS_trace.o := -I$(src) diff --git a/drivers/net/wireless/mediatek/mt7601u/core.c b/drivers/net/wireless/mediatek/mt7601u/core.c new file mode 100644 index 0000000000000..0aabd790f985f --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/core.c @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" + +int mt7601u_wait_asic_ready(struct mt7601u_dev *dev) +{ + int i = 100; + u32 val; + + do { + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return -EIO; + + val = mt7601u_rr(dev, MT_MAC_CSR0); + if (val && ~val) + return 0; + + udelay(10); + } while (i--); + + return -EIO; +} + +bool mt76_poll(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val, + int timeout) +{ + u32 cur; + + timeout /= 10; + do { + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return false; + + cur = mt7601u_rr(dev, offset) & mask; + if (cur == val) + return true; + + udelay(10); + } while (timeout-- > 0); + + dev_err(dev->dev, "Error: Time out with reg %08x\n", offset); + + return false; +} + +bool mt76_poll_msec(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val, + int timeout) +{ + u32 cur; + + timeout /= 10; + do { + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return false; + + cur = mt7601u_rr(dev, offset) & mask; + if (cur == val) + return true; + + msleep(10); + } while (timeout-- > 0); + + dev_err(dev->dev, "Error: Time out with reg %08x\n", offset); + + return false; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/debugfs.c b/drivers/net/wireless/mediatek/mt7601u/debugfs.c new file mode 100644 index 0000000000000..fc008475a03b2 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/debugfs.c @@ -0,0 +1,172 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#include "mt7601u.h" +#include "eeprom.h" + +static int +mt76_reg_set(void *data, u64 val) +{ + struct mt7601u_dev *dev = data; + + mt76_wr(dev, dev->debugfs_reg, val); + return 0; +} + +static int +mt76_reg_get(void *data, u64 *val) +{ + struct mt7601u_dev *dev = data; + + *val = mt76_rr(dev, dev->debugfs_reg); + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_regval, mt76_reg_get, mt76_reg_set, "0x%08llx\n"); + +static int +mt7601u_ampdu_stat_read(struct seq_file *file, void *data) +{ + struct mt7601u_dev *dev = file->private; + int i, j; + +#define stat_printf(grp, off, name) \ + seq_printf(file, #name ":\t%llu\n", dev->stats.grp[off]) + + stat_printf(rx_stat, 0, rx_crc_err); + stat_printf(rx_stat, 1, rx_phy_err); + stat_printf(rx_stat, 2, rx_false_cca); + stat_printf(rx_stat, 3, rx_plcp_err); + stat_printf(rx_stat, 4, rx_fifo_overflow); + stat_printf(rx_stat, 5, rx_duplicate); + + stat_printf(tx_stat, 0, tx_fail_cnt); + stat_printf(tx_stat, 1, tx_bcn_cnt); + stat_printf(tx_stat, 2, tx_success); + stat_printf(tx_stat, 3, tx_retransmit); + stat_printf(tx_stat, 4, tx_zero_len); + stat_printf(tx_stat, 5, tx_underflow); + + stat_printf(aggr_stat, 0, non_aggr_tx); + stat_printf(aggr_stat, 1, aggr_tx); + + stat_printf(zero_len_del, 0, tx_zero_len_del); + stat_printf(zero_len_del, 1, rx_zero_len_del); +#undef stat_printf + + seq_puts(file, "Aggregations stats:\n"); + for (i = 0; i < 4; i++) { + for (j = 0; j < 8; j++) + seq_printf(file, "%08llx ", + dev->stats.aggr_n[i * 8 + j]); + seq_putc(file, '\n'); + } + + seq_printf(file, "recent average AMPDU len: %d\n", + atomic_read(&dev->avg_ampdu_len)); + + return 0; +} + +static int +mt7601u_ampdu_stat_open(struct inode *inode, struct file *f) +{ + return single_open(f, mt7601u_ampdu_stat_read, inode->i_private); +} + +static const struct file_operations fops_ampdu_stat = { + .open = mt7601u_ampdu_stat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int +mt7601u_eeprom_param_read(struct seq_file *file, void *data) +{ + struct mt7601u_dev *dev = file->private; + struct mt7601u_rate_power *rp = &dev->ee->power_rate_table; + struct tssi_data *td = &dev->ee->tssi_data; + int i; + + seq_printf(file, "RF freq offset: %hhx\n", dev->ee->rf_freq_off); + seq_printf(file, "RSSI offset: %hhx %hhx\n", + dev->ee->rssi_offset[0], dev->ee->rssi_offset[1]); + seq_printf(file, "Reference temp: %hhx\n", dev->ee->ref_temp); + seq_printf(file, "LNA gain: %hhx\n", dev->ee->lna_gain); + seq_printf(file, "Reg channels: %hhu-%hhu\n", dev->ee->reg.start, + dev->ee->reg.start + dev->ee->reg.num - 1); + + seq_puts(file, "Per rate power:\n"); + for (i = 0; i < 2; i++) + seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n", + rp->cck[i].raw, rp->cck[i].bw20, rp->cck[i].bw40); + for (i = 0; i < 4; i++) + seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n", + rp->ofdm[i].raw, rp->ofdm[i].bw20, rp->ofdm[i].bw40); + for (i = 0; i < 4; i++) + seq_printf(file, "\t raw:%02hhx bw20:%02hhx bw40:%02hhx\n", + rp->ht[i].raw, rp->ht[i].bw20, rp->ht[i].bw40); + + seq_puts(file, "Per channel power:\n"); + for (i = 0; i < 7; i++) + seq_printf(file, "\t tx_power ch%u:%02hhx ch%u:%02hhx\n", + i * 2 + 1, dev->ee->chan_pwr[i * 2], + i * 2 + 2, dev->ee->chan_pwr[i * 2 + 1]); + + if (!dev->ee->tssi_enabled) + return 0; + + seq_puts(file, "TSSI:\n"); + seq_printf(file, "\t slope:%02hhx\n", td->slope); + seq_printf(file, "\t offset=%02hhx %02hhx %02hhx\n", + td->offset[0], td->offset[1], td->offset[2]); + seq_printf(file, "\t delta_off:%08x\n", td->tx0_delta_offset); + + return 0; +} + +static int +mt7601u_eeprom_param_open(struct inode *inode, struct file *f) +{ + return single_open(f, mt7601u_eeprom_param_read, inode->i_private); +} + +static const struct file_operations fops_eeprom_param = { + .open = mt7601u_eeprom_param_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +void mt7601u_init_debugfs(struct mt7601u_dev *dev) +{ + struct dentry *dir; + + dir = debugfs_create_dir("mt7601u", dev->hw->wiphy->debugfsdir); + if (!dir) + return; + + debugfs_create_u8("temperature", S_IRUSR, dir, &dev->raw_temp); + debugfs_create_u32("temp_mode", S_IRUSR, dir, &dev->temp_mode); + + debugfs_create_u32("regidx", S_IRUSR | S_IWUSR, dir, &dev->debugfs_reg); + debugfs_create_file("regval", S_IRUSR | S_IWUSR, dir, dev, + &fops_regval); + debugfs_create_file("ampdu_stat", S_IRUSR, dir, dev, &fops_ampdu_stat); + debugfs_create_file("eeprom_param", S_IRUSR, dir, dev, + &fops_eeprom_param); +} diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c new file mode 100644 index 0000000000000..7217da4f1543a --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/dma.c @@ -0,0 +1,505 @@ +/* + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "dma.h" +#include "usb.h" +#include "trace.h" + +static int mt7601u_submit_rx_buf(struct mt7601u_dev *dev, + struct mt7601u_dma_buf_rx *e, gfp_t gfp); + +static unsigned int ieee80211_get_hdrlen_from_buf(const u8 *data, unsigned len) +{ + const struct ieee80211_hdr *hdr = (const struct ieee80211_hdr *)data; + unsigned int hdrlen; + + if (unlikely(len < 10)) + return 0; + hdrlen = ieee80211_hdrlen(hdr->frame_control); + if (unlikely(hdrlen > len)) + return 0; + return hdrlen; +} + +static struct sk_buff * +mt7601u_rx_skb_from_seg(struct mt7601u_dev *dev, struct mt7601u_rxwi *rxwi, + void *data, u32 seg_len, u32 truesize, struct page *p) +{ + struct sk_buff *skb; + u32 true_len, hdr_len = 0, copy, frag; + + skb = alloc_skb(p ? 128 : seg_len, GFP_ATOMIC); + if (!skb) + return NULL; + + true_len = mt76_mac_process_rx(dev, skb, data, rxwi); + if (!true_len || true_len > seg_len) + goto bad_frame; + + hdr_len = ieee80211_get_hdrlen_from_buf(data, true_len); + if (!hdr_len) + goto bad_frame; + + if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_L2PAD)) { + memcpy(skb_put(skb, hdr_len), data, hdr_len); + + data += hdr_len + 2; + true_len -= hdr_len; + hdr_len = 0; + } + + /* If not doing paged RX allocated skb will always have enough space */ + copy = (true_len <= skb_tailroom(skb)) ? true_len : hdr_len + 8; + frag = true_len - copy; + + memcpy(skb_put(skb, copy), data, copy); + data += copy; + + if (frag) { + skb_add_rx_frag(skb, 0, p, data - page_address(p), + frag, truesize); + get_page(p); + } + + return skb; + +bad_frame: + dev_err_ratelimited(dev->dev, "Error: incorrect frame len:%u hdr:%u\n", + true_len, hdr_len); + dev_kfree_skb(skb); + return NULL; +} + +static void mt7601u_rx_process_seg(struct mt7601u_dev *dev, u8 *data, + u32 seg_len, struct page *p) +{ + struct sk_buff *skb; + struct mt7601u_rxwi *rxwi; + u32 fce_info, truesize = seg_len; + + /* DMA_INFO field at the beginning of the segment contains only some of + * the information, we need to read the FCE descriptor from the end. + */ + fce_info = get_unaligned_le32(data + seg_len - MT_FCE_INFO_LEN); + seg_len -= MT_FCE_INFO_LEN; + + data += MT_DMA_HDR_LEN; + seg_len -= MT_DMA_HDR_LEN; + + rxwi = (struct mt7601u_rxwi *) data; + data += sizeof(struct mt7601u_rxwi); + seg_len -= sizeof(struct mt7601u_rxwi); + + if (unlikely(rxwi->zero[0] || rxwi->zero[1] || rxwi->zero[2])) + dev_err_once(dev->dev, "Error: RXWI zero fields are set\n"); + if (unlikely(MT76_GET(MT_RXD_INFO_TYPE, fce_info))) + dev_err_once(dev->dev, "Error: RX path seen a non-pkt urb\n"); + + trace_mt_rx(dev, rxwi, fce_info); + + skb = mt7601u_rx_skb_from_seg(dev, rxwi, data, seg_len, truesize, p); + if (!skb) + return; + + ieee80211_rx_ni(dev->hw, skb); +} + +static u16 mt7601u_rx_next_seg_len(u8 *data, u32 data_len) +{ + u32 min_seg_len = MT_DMA_HDR_LEN + MT_RX_INFO_LEN + + sizeof(struct mt7601u_rxwi) + MT_FCE_INFO_LEN; + u16 dma_len = get_unaligned_le16(data); + + if (data_len < min_seg_len || + WARN_ON(!dma_len) || + WARN_ON(dma_len + MT_DMA_HDRS > data_len) || + WARN_ON(dma_len & 0x3)) + return 0; + + return MT_DMA_HDRS + dma_len; +} + +static void +mt7601u_rx_process_entry(struct mt7601u_dev *dev, struct mt7601u_dma_buf_rx *e) +{ + u32 seg_len, data_len = e->urb->actual_length; + u8 *data = page_address(e->p); + struct page *new_p = NULL; + int cnt = 0; + + if (!test_bit(MT7601U_STATE_INITIALIZED, &dev->state)) + return; + + /* Copy if there is very little data in the buffer. */ + if (data_len > 512) + new_p = dev_alloc_pages(MT_RX_ORDER); + + while ((seg_len = mt7601u_rx_next_seg_len(data, data_len))) { + mt7601u_rx_process_seg(dev, data, seg_len, new_p ? e->p : NULL); + + data_len -= seg_len; + data += seg_len; + cnt++; + } + + if (cnt > 1) + trace_mt_rx_dma_aggr(dev, cnt, !!new_p); + + if (new_p) { + /* we have one extra ref from the allocator */ + __free_pages(e->p, MT_RX_ORDER); + + e->p = new_p; + } +} + +static struct mt7601u_dma_buf_rx * +mt7601u_rx_get_pending_entry(struct mt7601u_dev *dev) +{ + struct mt7601u_rx_queue *q = &dev->rx_q; + struct mt7601u_dma_buf_rx *buf = NULL; + unsigned long flags; + + spin_lock_irqsave(&dev->rx_lock, flags); + + if (!q->pending) + goto out; + + buf = &q->e[q->start]; + q->pending--; + q->start = (q->start + 1) % q->entries; +out: + spin_unlock_irqrestore(&dev->rx_lock, flags); + + return buf; +} + +static void mt7601u_complete_rx(struct urb *urb) +{ + struct mt7601u_dev *dev = urb->context; + struct mt7601u_rx_queue *q = &dev->rx_q; + unsigned long flags; + + spin_lock_irqsave(&dev->rx_lock, flags); + + if (mt7601u_urb_has_error(urb)) + dev_err(dev->dev, "Error: RX urb failed:%d\n", urb->status); + if (WARN_ONCE(q->e[q->end].urb != urb, "RX urb mismatch")) + goto out; + + q->end = (q->end + 1) % q->entries; + q->pending++; + tasklet_schedule(&dev->rx_tasklet); +out: + spin_unlock_irqrestore(&dev->rx_lock, flags); +} + +static void mt7601u_rx_tasklet(unsigned long data) +{ + struct mt7601u_dev *dev = (struct mt7601u_dev *) data; + struct mt7601u_dma_buf_rx *e; + + while ((e = mt7601u_rx_get_pending_entry(dev))) { + if (e->urb->status) + continue; + + mt7601u_rx_process_entry(dev, e); + mt7601u_submit_rx_buf(dev, e, GFP_ATOMIC); + } +} + +static void mt7601u_complete_tx(struct urb *urb) +{ + struct mt7601u_tx_queue *q = urb->context; + struct mt7601u_dev *dev = q->dev; + struct sk_buff *skb; + unsigned long flags; + + spin_lock_irqsave(&dev->tx_lock, flags); + + if (mt7601u_urb_has_error(urb)) + dev_err(dev->dev, "Error: TX urb failed:%d\n", urb->status); + if (WARN_ONCE(q->e[q->start].urb != urb, "TX urb mismatch")) + goto out; + + skb = q->e[q->start].skb; + trace_mt_tx_dma_done(dev, skb); + + mt7601u_tx_status(dev, skb); + + if (q->used == q->entries - q->entries / 8) + ieee80211_wake_queue(dev->hw, skb_get_queue_mapping(skb)); + + q->start = (q->start + 1) % q->entries; + q->used--; + + if (urb->status) + goto out; + + set_bit(MT7601U_STATE_MORE_STATS, &dev->state); + if (!test_and_set_bit(MT7601U_STATE_READING_STATS, &dev->state)) + queue_delayed_work(dev->stat_wq, &dev->stat_work, + msecs_to_jiffies(10)); +out: + spin_unlock_irqrestore(&dev->tx_lock, flags); +} + +static int mt7601u_dma_submit_tx(struct mt7601u_dev *dev, + struct sk_buff *skb, u8 ep) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + unsigned snd_pipe = usb_sndbulkpipe(usb_dev, dev->out_eps[ep]); + struct mt7601u_dma_buf_tx *e; + struct mt7601u_tx_queue *q = &dev->tx_q[ep]; + unsigned long flags; + int ret; + + spin_lock_irqsave(&dev->tx_lock, flags); + + if (WARN_ON(q->entries <= q->used)) { + ret = -ENOSPC; + goto out; + } + + e = &q->e[q->end]; + e->skb = skb; + usb_fill_bulk_urb(e->urb, usb_dev, snd_pipe, skb->data, skb->len, + mt7601u_complete_tx, q); + ret = usb_submit_urb(e->urb, GFP_ATOMIC); + if (ret) { + /* Special-handle ENODEV from TX urb submission because it will + * often be the first ENODEV we see after device is removed. + */ + if (ret == -ENODEV) + set_bit(MT7601U_STATE_REMOVED, &dev->state); + else + dev_err(dev->dev, "Error: TX urb submit failed:%d\n", + ret); + goto out; + } + + q->end = (q->end + 1) % q->entries; + q->used++; + + if (q->used >= q->entries) + ieee80211_stop_queue(dev->hw, skb_get_queue_mapping(skb)); +out: + spin_unlock_irqrestore(&dev->tx_lock, flags); + + return ret; +} + +/* Map hardware Q to USB endpoint number */ +static u8 q2ep(u8 qid) +{ + /* TODO: take management packets to queue 5 */ + return qid + 1; +} + +/* Map USB endpoint number to Q id in the DMA engine */ +static enum mt76_qsel ep2dmaq(u8 ep) +{ + if (ep == 5) + return MT_QSEL_MGMT; + return MT_QSEL_EDCA; +} + +int mt7601u_dma_enqueue_tx(struct mt7601u_dev *dev, struct sk_buff *skb, + struct mt76_wcid *wcid, int hw_q) +{ + u8 ep = q2ep(hw_q); + u32 dma_flags; + int ret; + + dma_flags = MT_TXD_PKT_INFO_80211; + if (wcid->hw_key_idx == 0xff) + dma_flags |= MT_TXD_PKT_INFO_WIV; + + ret = mt7601u_dma_skb_wrap_pkt(skb, ep2dmaq(ep), dma_flags); + if (ret) + return ret; + + ret = mt7601u_dma_submit_tx(dev, skb, ep); + if (ret) { + ieee80211_free_txskb(dev->hw, skb); + return ret; + } + + return 0; +} + +static void mt7601u_kill_rx(struct mt7601u_dev *dev) +{ + int i; + unsigned long flags; + + spin_lock_irqsave(&dev->rx_lock, flags); + + for (i = 0; i < dev->rx_q.entries; i++) { + int next = dev->rx_q.end; + + spin_unlock_irqrestore(&dev->rx_lock, flags); + usb_poison_urb(dev->rx_q.e[next].urb); + spin_lock_irqsave(&dev->rx_lock, flags); + } + + spin_unlock_irqrestore(&dev->rx_lock, flags); +} + +static int mt7601u_submit_rx_buf(struct mt7601u_dev *dev, + struct mt7601u_dma_buf_rx *e, gfp_t gfp) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + u8 *buf = page_address(e->p); + unsigned pipe; + int ret; + + pipe = usb_rcvbulkpipe(usb_dev, dev->in_eps[MT_EP_IN_PKT_RX]); + + usb_fill_bulk_urb(e->urb, usb_dev, pipe, buf, MT_RX_URB_SIZE, + mt7601u_complete_rx, dev); + + trace_mt_submit_urb(dev, e->urb); + ret = usb_submit_urb(e->urb, gfp); + if (ret) + dev_err(dev->dev, "Error: submit RX URB failed:%d\n", ret); + + return ret; +} + +static int mt7601u_submit_rx(struct mt7601u_dev *dev) +{ + int i, ret; + + for (i = 0; i < dev->rx_q.entries; i++) { + ret = mt7601u_submit_rx_buf(dev, &dev->rx_q.e[i], GFP_KERNEL); + if (ret) + return ret; + } + + return 0; +} + +static void mt7601u_free_rx(struct mt7601u_dev *dev) +{ + int i; + + for (i = 0; i < dev->rx_q.entries; i++) { + __free_pages(dev->rx_q.e[i].p, MT_RX_ORDER); + usb_free_urb(dev->rx_q.e[i].urb); + } +} + +static int mt7601u_alloc_rx(struct mt7601u_dev *dev) +{ + int i; + + memset(&dev->rx_q, 0, sizeof(dev->rx_q)); + dev->rx_q.dev = dev; + dev->rx_q.entries = N_RX_ENTRIES; + + for (i = 0; i < N_RX_ENTRIES; i++) { + dev->rx_q.e[i].urb = usb_alloc_urb(0, GFP_KERNEL); + dev->rx_q.e[i].p = dev_alloc_pages(MT_RX_ORDER); + + if (!dev->rx_q.e[i].urb || !dev->rx_q.e[i].p) + return -ENOMEM; + } + + return 0; +} + +static void mt7601u_free_tx_queue(struct mt7601u_tx_queue *q) +{ + int i; + + WARN_ON(q->used); + + for (i = 0; i < q->entries; i++) { + usb_poison_urb(q->e[i].urb); + usb_free_urb(q->e[i].urb); + } +} + +static void mt7601u_free_tx(struct mt7601u_dev *dev) +{ + int i; + + for (i = 0; i < __MT_EP_OUT_MAX; i++) + mt7601u_free_tx_queue(&dev->tx_q[i]); +} + +static int mt7601u_alloc_tx_queue(struct mt7601u_dev *dev, + struct mt7601u_tx_queue *q) +{ + int i; + + q->dev = dev; + q->entries = N_TX_ENTRIES; + + for (i = 0; i < N_TX_ENTRIES; i++) { + q->e[i].urb = usb_alloc_urb(0, GFP_KERNEL); + if (!q->e[i].urb) + return -ENOMEM; + } + + return 0; +} + +static int mt7601u_alloc_tx(struct mt7601u_dev *dev) +{ + int i; + + dev->tx_q = devm_kcalloc(dev->dev, __MT_EP_OUT_MAX, + sizeof(*dev->tx_q), GFP_KERNEL); + + for (i = 0; i < __MT_EP_OUT_MAX; i++) + if (mt7601u_alloc_tx_queue(dev, &dev->tx_q[i])) + return -ENOMEM; + + return 0; +} + +int mt7601u_dma_init(struct mt7601u_dev *dev) +{ + int ret = -ENOMEM; + + tasklet_init(&dev->rx_tasklet, mt7601u_rx_tasklet, (unsigned long) dev); + + ret = mt7601u_alloc_tx(dev); + if (ret) + goto err; + ret = mt7601u_alloc_rx(dev); + if (ret) + goto err; + + ret = mt7601u_submit_rx(dev); + if (ret) + goto err; + + return 0; +err: + mt7601u_dma_cleanup(dev); + return ret; +} + +void mt7601u_dma_cleanup(struct mt7601u_dev *dev) +{ + mt7601u_kill_rx(dev); + + tasklet_kill(&dev->rx_tasklet); + + mt7601u_free_rx(dev); + mt7601u_free_tx(dev); +} diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.h b/drivers/net/wireless/mediatek/mt7601u/dma.h new file mode 100644 index 0000000000000..978e8a90b87f3 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/dma.h @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_DMA_H +#define __MT7601U_DMA_H + +#include +#include + +#include "util.h" + +#define MT_DMA_HDR_LEN 4 +#define MT_RX_INFO_LEN 4 +#define MT_FCE_INFO_LEN 4 +#define MT_DMA_HDRS (MT_DMA_HDR_LEN + MT_RX_INFO_LEN) + +/* Common Tx DMA descriptor fields */ +#define MT_TXD_INFO_LEN GENMASK(15, 0) +#define MT_TXD_INFO_D_PORT GENMASK(29, 27) +#define MT_TXD_INFO_TYPE GENMASK(31, 30) + +enum mt76_msg_port { + WLAN_PORT, + CPU_RX_PORT, + CPU_TX_PORT, + HOST_PORT, + VIRTUAL_CPU_RX_PORT, + VIRTUAL_CPU_TX_PORT, + DISCARD, +}; + +enum mt76_info_type { + DMA_PACKET, + DMA_COMMAND, +}; + +/* Tx DMA packet specific flags */ +#define MT_TXD_PKT_INFO_NEXT_VLD BIT(16) +#define MT_TXD_PKT_INFO_TX_BURST BIT(17) +#define MT_TXD_PKT_INFO_80211 BIT(19) +#define MT_TXD_PKT_INFO_TSO BIT(20) +#define MT_TXD_PKT_INFO_CSO BIT(21) +#define MT_TXD_PKT_INFO_WIV BIT(24) +#define MT_TXD_PKT_INFO_QSEL GENMASK(26, 25) + +enum mt76_qsel { + MT_QSEL_MGMT, + MT_QSEL_HCCA, + MT_QSEL_EDCA, + MT_QSEL_EDCA_2, +}; + +/* Tx DMA MCU command specific flags */ +#define MT_TXD_CMD_INFO_SEQ GENMASK(19, 16) +#define MT_TXD_CMD_INFO_TYPE GENMASK(26, 20) + +static inline int mt7601u_dma_skb_wrap(struct sk_buff *skb, + enum mt76_msg_port d_port, + enum mt76_info_type type, u32 flags) +{ + u32 info; + + /* Buffer layout: + * | 4B | xfer len | pad | 4B | + * | TXINFO | pkt/cmd | zero pad to 4B | zero | + * + * length field of TXINFO should be set to 'xfer len'. + */ + + info = flags | + MT76_SET(MT_TXD_INFO_LEN, round_up(skb->len, 4)) | + MT76_SET(MT_TXD_INFO_D_PORT, d_port) | + MT76_SET(MT_TXD_INFO_TYPE, type); + + put_unaligned_le32(info, skb_push(skb, sizeof(info))); + return skb_put_padto(skb, round_up(skb->len, 4) + 4); +} + +static inline int +mt7601u_dma_skb_wrap_pkt(struct sk_buff *skb, enum mt76_qsel qsel, u32 flags) +{ + flags |= MT76_SET(MT_TXD_PKT_INFO_QSEL, qsel); + return mt7601u_dma_skb_wrap(skb, WLAN_PORT, DMA_PACKET, flags); +} + +/* Common Rx DMA descriptor fields */ +#define MT_RXD_INFO_LEN GENMASK(13, 0) +#define MT_RXD_INFO_PCIE_INTR BIT(24) +#define MT_RXD_INFO_QSEL GENMASK(26, 25) +#define MT_RXD_INFO_PORT GENMASK(29, 27) +#define MT_RXD_INFO_TYPE GENMASK(31, 30) + +/* Rx DMA packet specific flags */ +#define MT_RXD_PKT_INFO_UDP_ERR BIT(16) +#define MT_RXD_PKT_INFO_TCP_ERR BIT(17) +#define MT_RXD_PKT_INFO_IP_ERR BIT(18) +#define MT_RXD_PKT_INFO_PKT_80211 BIT(19) +#define MT_RXD_PKT_INFO_L3L4_DONE BIT(20) +#define MT_RXD_PKT_INFO_MAC_LEN GENMASK(23, 21) + +/* Rx DMA MCU command specific flags */ +#define MT_RXD_CMD_INFO_SELF_GEN BIT(15) +#define MT_RXD_CMD_INFO_CMD_SEQ GENMASK(19, 16) +#define MT_RXD_CMD_INFO_EVT_TYPE GENMASK(23, 20) + +enum mt76_evt_type { + CMD_DONE, + CMD_ERROR, + CMD_RETRY, + EVENT_PWR_RSP, + EVENT_WOW_RSP, + EVENT_CARRIER_DETECT_RSP, + EVENT_DFS_DETECT_RSP, +}; + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.c b/drivers/net/wireless/mediatek/mt7601u/eeprom.c new file mode 100644 index 0000000000000..8d8ee0344f7ba --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.c @@ -0,0 +1,418 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include "mt7601u.h" +#include "eeprom.h" + +static bool +field_valid(u8 val) +{ + return val != 0xff; +} + +static s8 +field_validate(u8 val) +{ + if (!field_valid(val)) + return 0; + + return val; +} + +static int +mt7601u_efuse_read(struct mt7601u_dev *dev, u16 addr, u8 *data, + enum mt7601u_eeprom_access_modes mode) +{ + u32 val; + int i; + + val = mt76_rr(dev, MT_EFUSE_CTRL); + val &= ~(MT_EFUSE_CTRL_AIN | + MT_EFUSE_CTRL_MODE); + val |= MT76_SET(MT_EFUSE_CTRL_AIN, addr & ~0xf) | + MT76_SET(MT_EFUSE_CTRL_MODE, mode) | + MT_EFUSE_CTRL_KICK; + mt76_wr(dev, MT_EFUSE_CTRL, val); + + if (!mt76_poll(dev, MT_EFUSE_CTRL, MT_EFUSE_CTRL_KICK, 0, 1000)) + return -ETIMEDOUT; + + val = mt76_rr(dev, MT_EFUSE_CTRL); + if ((val & MT_EFUSE_CTRL_AOUT) == MT_EFUSE_CTRL_AOUT) { + /* Parts of eeprom not in the usage map (0x80-0xc0,0xf0) + * will not return valid data but it's ok. + */ + memset(data, 0xff, 16); + return 0; + } + + for (i = 0; i < 4; i++) { + val = mt76_rr(dev, MT_EFUSE_DATA(i)); + put_unaligned_le32(val, data + 4 * i); + } + + return 0; +} + +static int +mt7601u_efuse_physical_size_check(struct mt7601u_dev *dev) +{ + const int map_reads = DIV_ROUND_UP(MT_EFUSE_USAGE_MAP_SIZE, 16); + u8 data[map_reads * 16]; + int ret, i; + u32 start = 0, end = 0, cnt_free; + + for (i = 0; i < map_reads; i++) { + ret = mt7601u_efuse_read(dev, MT_EE_USAGE_MAP_START + i * 16, + data + i * 16, MT_EE_PHYSICAL_READ); + if (ret) + return ret; + } + + for (i = 0; i < MT_EFUSE_USAGE_MAP_SIZE; i++) + if (!data[i]) { + if (!start) + start = MT_EE_USAGE_MAP_START + i; + end = MT_EE_USAGE_MAP_START + i; + } + cnt_free = end - start + 1; + + if (MT_EFUSE_USAGE_MAP_SIZE - cnt_free < 5) { + dev_err(dev->dev, "Error: your device needs default EEPROM file and this driver doesn't support it!\n"); + return -EINVAL; + } + + return 0; +} + +static bool +mt7601u_has_tssi(struct mt7601u_dev *dev, u8 *eeprom) +{ + u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1); + + return ~nic_conf1 && (nic_conf1 & MT_EE_NIC_CONF_1_TX_ALC_EN); +} + +static void +mt7601u_set_chip_cap(struct mt7601u_dev *dev, u8 *eeprom) +{ + u16 nic_conf0 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_0); + u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1); + + if (!field_valid(nic_conf1 & 0xff)) + nic_conf1 &= 0xff00; + + dev->ee->tssi_enabled = mt7601u_has_tssi(dev, eeprom) && + !(nic_conf1 & MT_EE_NIC_CONF_1_TEMP_TX_ALC); + + if (nic_conf1 & MT_EE_NIC_CONF_1_HW_RF_CTRL) + dev_err(dev->dev, + "Error: this driver does not support HW RF ctrl\n"); + + if (!field_valid(nic_conf0 >> 8)) + return; + + if (MT76_GET(MT_EE_NIC_CONF_0_RX_PATH, nic_conf0) > 1 || + MT76_GET(MT_EE_NIC_CONF_0_TX_PATH, nic_conf0) > 1) + dev_err(dev->dev, + "Error: device has more than 1 RX/TX stream!\n"); +} + +static int +mt7601u_set_macaddr(struct mt7601u_dev *dev, const u8 *eeprom) +{ + const void *src = eeprom + MT_EE_MAC_ADDR; + + ether_addr_copy(dev->macaddr, src); + + if (!is_valid_ether_addr(dev->macaddr)) { + eth_random_addr(dev->macaddr); + dev_info(dev->dev, + "Invalid MAC address, using random address %pM\n", + dev->macaddr); + } + + mt76_wr(dev, MT_MAC_ADDR_DW0, get_unaligned_le32(dev->macaddr)); + mt76_wr(dev, MT_MAC_ADDR_DW1, get_unaligned_le16(dev->macaddr + 4) | + MT76_SET(MT_MAC_ADDR_DW1_U2ME_MASK, 0xff)); + + return 0; +} + +static void mt7601u_set_channel_target_power(struct mt7601u_dev *dev, + u8 *eeprom, u8 max_pwr) +{ + u8 trgt_pwr = eeprom[MT_EE_TX_TSSI_TARGET_POWER]; + + if (trgt_pwr > max_pwr || !trgt_pwr) { + dev_warn(dev->dev, "Error: EEPROM trgt power invalid %hhx!\n", + trgt_pwr); + trgt_pwr = 0x20; + } + + memset(dev->ee->chan_pwr, trgt_pwr, sizeof(dev->ee->chan_pwr)); +} + +static void +mt7601u_set_channel_power(struct mt7601u_dev *dev, u8 *eeprom) +{ + u32 i, val; + u8 max_pwr; + + val = mt7601u_rr(dev, MT_TX_ALC_CFG_0); + max_pwr = MT76_GET(MT_TX_ALC_CFG_0_LIMIT_0, val); + + if (mt7601u_has_tssi(dev, eeprom)) { + mt7601u_set_channel_target_power(dev, eeprom, max_pwr); + return; + } + + for (i = 0; i < 14; i++) { + s8 power = field_validate(eeprom[MT_EE_TX_POWER_OFFSET + i]); + + if (power > max_pwr || power < 0) + power = MT7601U_DEFAULT_TX_POWER; + + dev->ee->chan_pwr[i] = power; + } +} + +static void +mt7601u_set_country_reg(struct mt7601u_dev *dev, u8 *eeprom) +{ + /* Note: - region 31 is not valid for mt7601u (see rtmp_init.c) + * - comments in rtmp_def.h are incorrect (see rt_channel.c) + */ + static const struct reg_channel_bounds chan_bounds[] = { + /* EEPROM country regions 0 - 7 */ + { 1, 11 }, { 1, 13 }, { 10, 2 }, { 10, 4 }, + { 14, 1 }, { 1, 14 }, { 3, 7 }, { 5, 9 }, + /* EEPROM country regions 32 - 33 */ + { 1, 11 }, { 1, 14 } + }; + u8 val = eeprom[MT_EE_COUNTRY_REGION]; + int idx = -1; + + if (val < 8) + idx = val; + if (val > 31 && val < 33) + idx = val - 32 + 8; + + if (idx != -1) + dev_info(dev->dev, + "EEPROM country region %02hhx (channels %hhd-%hhd)\n", + val, chan_bounds[idx].start, + chan_bounds[idx].start + chan_bounds[idx].num - 1); + else + idx = 5; /* channels 1 - 14 */ + + dev->ee->reg = chan_bounds[idx]; + + /* TODO: country region 33 is special - phy should be set to B-mode + * before entering channel 14 (see sta/connect.c) + */ +} + +static void +mt7601u_set_rf_freq_off(struct mt7601u_dev *dev, u8 *eeprom) +{ + u8 comp; + + dev->ee->rf_freq_off = field_validate(eeprom[MT_EE_FREQ_OFFSET]); + comp = field_validate(eeprom[MT_EE_FREQ_OFFSET_COMPENSATION]); + + if (comp & BIT(7)) + dev->ee->rf_freq_off -= comp & 0x7f; + else + dev->ee->rf_freq_off += comp; +} + +static void +mt7601u_set_rssi_offset(struct mt7601u_dev *dev, u8 *eeprom) +{ + int i; + s8 *rssi_offset = dev->ee->rssi_offset; + + for (i = 0; i < 2; i++) { + rssi_offset[i] = eeprom[MT_EE_RSSI_OFFSET + i]; + + if (rssi_offset[i] < -10 || rssi_offset[i] > 10) { + dev_warn(dev->dev, + "Warning: EEPROM RSSI is invalid %02hhx\n", + rssi_offset[i]); + rssi_offset[i] = 0; + } + } +} + +static void +mt7601u_extra_power_over_mac(struct mt7601u_dev *dev) +{ + u32 val; + + val = ((mt7601u_rr(dev, MT_TX_PWR_CFG_1) & 0x0000ff00) >> 8); + val |= ((mt7601u_rr(dev, MT_TX_PWR_CFG_2) & 0x0000ff00) << 8); + mt7601u_wr(dev, MT_TX_PWR_CFG_7, val); + + val = ((mt7601u_rr(dev, MT_TX_PWR_CFG_4) & 0x0000ff00) >> 8); + mt7601u_wr(dev, MT_TX_PWR_CFG_9, val); +} + +static void +mt7601u_set_power_rate(struct power_per_rate *rate, s8 delta, u8 value) +{ + /* Invalid? Note: vendor driver does not handle this */ + if (value == 0xff) + return; + + rate->raw = s6_validate(value); + rate->bw20 = s6_to_int(value); + /* Note: vendor driver does cap the value to s6 right away */ + rate->bw40 = rate->bw20 + delta; +} + +static void +mt7601u_save_power_rate(struct mt7601u_dev *dev, s8 delta, u32 val, int i) +{ + struct mt7601u_rate_power *t = &dev->ee->power_rate_table; + + switch (i) { + case 0: + mt7601u_set_power_rate(&t->cck[0], delta, (val >> 0) & 0xff); + mt7601u_set_power_rate(&t->cck[1], delta, (val >> 8) & 0xff); + /* Save cck bw20 for fixups of channel 14 */ + dev->ee->real_cck_bw20[0] = t->cck[0].bw20; + dev->ee->real_cck_bw20[1] = t->cck[1].bw20; + + mt7601u_set_power_rate(&t->ofdm[0], delta, (val >> 16) & 0xff); + mt7601u_set_power_rate(&t->ofdm[1], delta, (val >> 24) & 0xff); + break; + case 1: + mt7601u_set_power_rate(&t->ofdm[2], delta, (val >> 0) & 0xff); + mt7601u_set_power_rate(&t->ofdm[3], delta, (val >> 8) & 0xff); + mt7601u_set_power_rate(&t->ht[0], delta, (val >> 16) & 0xff); + mt7601u_set_power_rate(&t->ht[1], delta, (val >> 24) & 0xff); + break; + case 2: + mt7601u_set_power_rate(&t->ht[2], delta, (val >> 0) & 0xff); + mt7601u_set_power_rate(&t->ht[3], delta, (val >> 8) & 0xff); + break; + } +} + +static s8 +get_delta(u8 val) +{ + s8 ret; + + if (!field_valid(val) || !(val & BIT(7))) + return 0; + + ret = val & 0x1f; + if (ret > 8) + ret = 8; + if (val & BIT(6)) + ret = -ret; + + return ret; +} + +static void +mt7601u_config_tx_power_per_rate(struct mt7601u_dev *dev, u8 *eeprom) +{ + u32 val; + s8 bw40_delta; + int i; + + bw40_delta = get_delta(eeprom[MT_EE_TX_POWER_DELTA_BW40]); + + for (i = 0; i < 5; i++) { + val = get_unaligned_le32(eeprom + MT_EE_TX_POWER_BYRATE(i)); + + mt7601u_save_power_rate(dev, bw40_delta, val, i); + + if (~val) + mt7601u_wr(dev, MT_TX_PWR_CFG_0 + i * 4, val); + } + + mt7601u_extra_power_over_mac(dev); +} + +static void +mt7601u_init_tssi_params(struct mt7601u_dev *dev, u8 *eeprom) +{ + struct tssi_data *d = &dev->ee->tssi_data; + + if (!dev->ee->tssi_enabled) + return; + + d->slope = eeprom[MT_EE_TX_TSSI_SLOPE]; + d->tx0_delta_offset = eeprom[MT_EE_TX_TSSI_OFFSET] * 1024; + d->offset[0] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP]; + d->offset[1] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP + 1]; + d->offset[2] = eeprom[MT_EE_TX_TSSI_OFFSET_GROUP + 2]; +} + +int +mt7601u_eeprom_init(struct mt7601u_dev *dev) +{ + u8 *eeprom; + int i, ret; + + ret = mt7601u_efuse_physical_size_check(dev); + if (ret) + return ret; + + dev->ee = devm_kzalloc(dev->dev, sizeof(*dev->ee), GFP_KERNEL); + if (!dev->ee) + return -ENOMEM; + + eeprom = kmalloc(MT7601U_EEPROM_SIZE, GFP_KERNEL); + if (!eeprom) + return -ENOMEM; + + for (i = 0; i + 16 <= MT7601U_EEPROM_SIZE; i += 16) { + ret = mt7601u_efuse_read(dev, i, eeprom + i, MT_EE_READ); + if (ret) + goto out; + } + + if (eeprom[MT_EE_VERSION_EE] > MT7601U_EE_MAX_VER) + dev_warn(dev->dev, + "Warning: unsupported EEPROM version %02hhx\n", + eeprom[MT_EE_VERSION_EE]); + dev_info(dev->dev, "EEPROM ver:%02hhx fae:%02hhx\n", + eeprom[MT_EE_VERSION_EE], eeprom[MT_EE_VERSION_FAE]); + + mt7601u_set_macaddr(dev, eeprom); + mt7601u_set_chip_cap(dev, eeprom); + mt7601u_set_channel_power(dev, eeprom); + mt7601u_set_country_reg(dev, eeprom); + mt7601u_set_rf_freq_off(dev, eeprom); + mt7601u_set_rssi_offset(dev, eeprom); + dev->ee->ref_temp = eeprom[MT_EE_REF_TEMP]; + dev->ee->lna_gain = eeprom[MT_EE_LNA_GAIN]; + + mt7601u_config_tx_power_per_rate(dev, eeprom); + + mt7601u_init_tssi_params(dev, eeprom); +out: + kfree(eeprom); + return ret; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.h b/drivers/net/wireless/mediatek/mt7601u/eeprom.h new file mode 100644 index 0000000000000..662d12703b69c --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.h @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_EEPROM_H +#define __MT7601U_EEPROM_H + +struct mt7601u_dev; + +#define MT7601U_EE_MAX_VER 0x0c +#define MT7601U_EEPROM_SIZE 256 + +#define MT7601U_DEFAULT_TX_POWER 6 + +enum mt76_eeprom_field { + MT_EE_CHIP_ID = 0x00, + MT_EE_VERSION_FAE = 0x02, + MT_EE_VERSION_EE = 0x03, + MT_EE_MAC_ADDR = 0x04, + MT_EE_NIC_CONF_0 = 0x34, + MT_EE_NIC_CONF_1 = 0x36, + MT_EE_COUNTRY_REGION = 0x39, + MT_EE_FREQ_OFFSET = 0x3a, + MT_EE_NIC_CONF_2 = 0x42, + + MT_EE_LNA_GAIN = 0x44, + MT_EE_RSSI_OFFSET = 0x46, + + MT_EE_TX_POWER_DELTA_BW40 = 0x50, + MT_EE_TX_POWER_OFFSET = 0x52, + + MT_EE_TX_TSSI_SLOPE = 0x6e, + MT_EE_TX_TSSI_OFFSET_GROUP = 0x6f, + MT_EE_TX_TSSI_OFFSET = 0x76, + + MT_EE_TX_TSSI_TARGET_POWER = 0xd0, + MT_EE_REF_TEMP = 0xd1, + MT_EE_FREQ_OFFSET_COMPENSATION = 0xdb, + MT_EE_TX_POWER_BYRATE_BASE = 0xde, + + MT_EE_USAGE_MAP_START = 0x1e0, + MT_EE_USAGE_MAP_END = 0x1fc, +}; + +#define MT_EE_NIC_CONF_0_RX_PATH GENMASK(3, 0) +#define MT_EE_NIC_CONF_0_TX_PATH GENMASK(7, 4) +#define MT_EE_NIC_CONF_0_BOARD_TYPE GENMASK(13, 12) + +#define MT_EE_NIC_CONF_1_HW_RF_CTRL BIT(0) +#define MT_EE_NIC_CONF_1_TEMP_TX_ALC BIT(1) +#define MT_EE_NIC_CONF_1_LNA_EXT_2G BIT(2) +#define MT_EE_NIC_CONF_1_LNA_EXT_5G BIT(3) +#define MT_EE_NIC_CONF_1_TX_ALC_EN BIT(13) + +#define MT_EE_NIC_CONF_2_RX_STREAM GENMASK(3, 0) +#define MT_EE_NIC_CONF_2_TX_STREAM GENMASK(7, 4) +#define MT_EE_NIC_CONF_2_HW_ANTDIV BIT(8) +#define MT_EE_NIC_CONF_2_XTAL_OPTION GENMASK(10, 9) +#define MT_EE_NIC_CONF_2_TEMP_DISABLE BIT(11) +#define MT_EE_NIC_CONF_2_COEX_METHOD GENMASK(15, 13) + +#define MT_EE_TX_POWER_BYRATE(i) (MT_EE_TX_POWER_BYRATE_BASE + \ + (i) * 4) + +#define MT_EFUSE_USAGE_MAP_SIZE (MT_EE_USAGE_MAP_END - \ + MT_EE_USAGE_MAP_START + 1) + +enum mt7601u_eeprom_access_modes { + MT_EE_READ = 0, + MT_EE_PHYSICAL_READ = 1, +}; + +struct power_per_rate { + u8 raw; /* validated s6 value */ + s8 bw20; /* sign-extended int */ + s8 bw40; /* sign-extended int */ +}; + +/* Power per rate - one value per two rates */ +struct mt7601u_rate_power { + struct power_per_rate cck[2]; + struct power_per_rate ofdm[4]; + struct power_per_rate ht[4]; +}; + +struct reg_channel_bounds { + u8 start; + u8 num; +}; + +struct mt7601u_eeprom_params { + bool tssi_enabled; + u8 rf_freq_off; + s8 rssi_offset[2]; + s8 ref_temp; + s8 lna_gain; + + u8 chan_pwr[14]; + struct mt7601u_rate_power power_rate_table; + s8 real_cck_bw20[2]; + + /* TSSI stuff - only with internal TX ALC */ + struct tssi_data { + int tx0_delta_offset; + u8 slope; + u8 offset[3]; + } tssi_data; + + struct reg_channel_bounds reg; +}; + +int mt7601u_eeprom_init(struct mt7601u_dev *dev); + +static inline u32 s6_validate(u32 reg) +{ + WARN_ON(reg & ~GENMASK(5, 0)); + return reg & GENMASK(5, 0); +} + +static inline int s6_to_int(u32 reg) +{ + int s6; + + s6 = s6_validate(reg); + if (s6 & BIT(5)) + s6 -= BIT(6); + + return s6; +} + +static inline u32 int_to_s6(int val) +{ + if (val < -0x20) + return 0x20; + if (val > 0x1f) + return 0x1f; + + return val & 0x3f; +} + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/init.c b/drivers/net/wireless/mediatek/mt7601u/init.c new file mode 100644 index 0000000000000..45eb0796a2e54 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/init.c @@ -0,0 +1,628 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "eeprom.h" +#include "trace.h" +#include "mcu.h" + +#include "initvals.h" + +static void +mt7601u_set_wlan_state(struct mt7601u_dev *dev, u32 val, bool enable) +{ + int i; + + /* Note: we don't turn off WLAN_CLK because that makes the device + * not respond properly on the probe path. + * In case anyone (PSM?) wants to use this function we can + * bring the clock stuff back and fixup the probe path. + */ + + if (enable) + val |= (MT_WLAN_FUN_CTRL_WLAN_EN | + MT_WLAN_FUN_CTRL_WLAN_CLK_EN); + else + val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN); + + mt7601u_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + if (enable) { + set_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state); + } else { + clear_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state); + return; + } + + for (i = 200; i; i--) { + val = mt7601u_rr(dev, MT_CMB_CTRL); + + if (val & MT_CMB_CTRL_XTAL_RDY && val & MT_CMB_CTRL_PLL_LD) + break; + + udelay(20); + } + + /* Note: vendor driver tries to disable/enable wlan here and retry + * but the code which does it is so buggy it must have never + * triggered, so don't bother. + */ + if (!i) + dev_err(dev->dev, "Error: PLL and XTAL check failed!\n"); +} + +static void mt7601u_chip_onoff(struct mt7601u_dev *dev, bool enable, bool reset) +{ + u32 val; + + mutex_lock(&dev->hw_atomic_mutex); + + val = mt7601u_rr(dev, MT_WLAN_FUN_CTRL); + + if (reset) { + val |= MT_WLAN_FUN_CTRL_GPIO_OUT_EN; + val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL; + + if (val & MT_WLAN_FUN_CTRL_WLAN_EN) { + val |= (MT_WLAN_FUN_CTRL_WLAN_RESET | + MT_WLAN_FUN_CTRL_WLAN_RESET_RF); + mt7601u_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + val &= ~(MT_WLAN_FUN_CTRL_WLAN_RESET | + MT_WLAN_FUN_CTRL_WLAN_RESET_RF); + } + } + + mt7601u_wr(dev, MT_WLAN_FUN_CTRL, val); + udelay(20); + + mt7601u_set_wlan_state(dev, val, enable); + + mutex_unlock(&dev->hw_atomic_mutex); +} + +static void mt7601u_reset_csr_bbp(struct mt7601u_dev *dev) +{ + mt7601u_wr(dev, MT_MAC_SYS_CTRL, (MT_MAC_SYS_CTRL_RESET_CSR | + MT_MAC_SYS_CTRL_RESET_BBP)); + mt7601u_wr(dev, MT_USB_DMA_CFG, 0); + msleep(1); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); +} + +static void mt7601u_init_usb_dma(struct mt7601u_dev *dev) +{ + u32 val; + + val = MT76_SET(MT_USB_DMA_CFG_RX_BULK_AGG_TOUT, MT_USB_AGGR_TIMEOUT) | + MT76_SET(MT_USB_DMA_CFG_RX_BULK_AGG_LMT, MT_USB_AGGR_SIZE_LIMIT) | + MT_USB_DMA_CFG_RX_BULK_EN | + MT_USB_DMA_CFG_TX_BULK_EN; + if (dev->in_max_packet == 512) + val |= MT_USB_DMA_CFG_RX_BULK_AGG_EN; + mt7601u_wr(dev, MT_USB_DMA_CFG, val); + + val |= MT_USB_DMA_CFG_UDMA_RX_WL_DROP; + mt7601u_wr(dev, MT_USB_DMA_CFG, val); + val &= ~MT_USB_DMA_CFG_UDMA_RX_WL_DROP; + mt7601u_wr(dev, MT_USB_DMA_CFG, val); +} + +static int mt7601u_init_bbp(struct mt7601u_dev *dev) +{ + int ret; + + ret = mt7601u_wait_bbp_ready(dev); + if (ret) + return ret; + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, bbp_common_vals, + ARRAY_SIZE(bbp_common_vals)); + if (ret) + return ret; + + return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, bbp_chip_vals, + ARRAY_SIZE(bbp_chip_vals)); +} + +static void +mt76_init_beacon_offsets(struct mt7601u_dev *dev) +{ + u16 base = MT_BEACON_BASE; + u32 regs[4] = {}; + int i; + + for (i = 0; i < 16; i++) { + u16 addr = dev->beacon_offsets[i]; + + regs[i / 4] |= ((addr - base) / 64) << (8 * (i % 4)); + } + + for (i = 0; i < 4; i++) + mt7601u_wr(dev, MT_BCN_OFFSET(i), regs[i]); +} + +static int mt7601u_write_mac_initvals(struct mt7601u_dev *dev) +{ + int ret; + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_WLAN, mac_common_vals, + ARRAY_SIZE(mac_common_vals)); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_WLAN, + mac_chip_vals, ARRAY_SIZE(mac_chip_vals)); + if (ret) + return ret; + + mt76_init_beacon_offsets(dev); + + mt7601u_wr(dev, MT_AUX_CLK_CFG, 0); + + return 0; +} + +static int mt7601u_init_wcid_mem(struct mt7601u_dev *dev) +{ + u32 *vals; + int i, ret; + + vals = kmalloc(sizeof(*vals) * N_WCIDS * 2, GFP_KERNEL); + if (!vals) + return -ENOMEM; + + for (i = 0; i < N_WCIDS; i++) { + vals[i * 2] = 0xffffffff; + vals[i * 2 + 1] = 0x00ffffff; + } + + ret = mt7601u_burst_write_regs(dev, MT_WCID_ADDR_BASE, + vals, N_WCIDS * 2); + kfree(vals); + + return ret; +} + +static int mt7601u_init_key_mem(struct mt7601u_dev *dev) +{ + u32 vals[4] = {}; + + return mt7601u_burst_write_regs(dev, MT_SKEY_MODE_BASE_0, + vals, ARRAY_SIZE(vals)); +} + +static int mt7601u_init_wcid_attr_mem(struct mt7601u_dev *dev) +{ + u32 *vals; + int i, ret; + + vals = kmalloc(sizeof(*vals) * N_WCIDS * 2, GFP_KERNEL); + if (!vals) + return -ENOMEM; + + for (i = 0; i < N_WCIDS * 2; i++) + vals[i] = 1; + + ret = mt7601u_burst_write_regs(dev, MT_WCID_ATTR_BASE, + vals, N_WCIDS * 2); + kfree(vals); + + return ret; +} + +static void mt7601u_reset_counters(struct mt7601u_dev *dev) +{ + mt7601u_rr(dev, MT_RX_STA_CNT0); + mt7601u_rr(dev, MT_RX_STA_CNT1); + mt7601u_rr(dev, MT_RX_STA_CNT2); + mt7601u_rr(dev, MT_TX_STA_CNT0); + mt7601u_rr(dev, MT_TX_STA_CNT1); + mt7601u_rr(dev, MT_TX_STA_CNT2); +} + +int mt7601u_mac_start(struct mt7601u_dev *dev) +{ + mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_TX); + + if (!mt76_poll(dev, MT_WPDMA_GLO_CFG, MT_WPDMA_GLO_CFG_TX_DMA_BUSY | + MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 200000)) + return -ETIMEDOUT; + + dev->rxfilter = MT_RX_FILTR_CFG_CRC_ERR | + MT_RX_FILTR_CFG_PHY_ERR | MT_RX_FILTR_CFG_PROMISC | + MT_RX_FILTR_CFG_VER_ERR | MT_RX_FILTR_CFG_DUP | + MT_RX_FILTR_CFG_CFACK | MT_RX_FILTR_CFG_CFEND | + MT_RX_FILTR_CFG_ACK | MT_RX_FILTR_CFG_CTS | + MT_RX_FILTR_CFG_RTS | MT_RX_FILTR_CFG_PSPOLL | + MT_RX_FILTR_CFG_BA | MT_RX_FILTR_CFG_CTRL_RSV; + mt7601u_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, + MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX); + + if (!mt76_poll(dev, MT_WPDMA_GLO_CFG, MT_WPDMA_GLO_CFG_TX_DMA_BUSY | + MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 50)) + return -ETIMEDOUT; + + return 0; +} + +static void mt7601u_mac_stop_hw(struct mt7601u_dev *dev) +{ + int i, ok; + + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return; + + mt76_clear(dev, MT_BEACON_TIME_CFG, MT_BEACON_TIME_CFG_TIMER_EN | + MT_BEACON_TIME_CFG_SYNC_MODE | MT_BEACON_TIME_CFG_TBTT_EN | + MT_BEACON_TIME_CFG_BEACON_TX); + + if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000)) + dev_warn(dev->dev, "Warning: TX DMA did not stop!\n"); + + /* Page count on TxQ */ + i = 200; + while (i-- && ((mt76_rr(dev, 0x0438) & 0xffffffff) || + (mt76_rr(dev, 0x0a30) & 0x000000ff) || + (mt76_rr(dev, 0x0a34) & 0x00ff00ff))) + msleep(10); + + if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX, 0, 1000)) + dev_warn(dev->dev, "Warning: MAC TX did not stop!\n"); + + mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX | + MT_MAC_SYS_CTRL_ENABLE_TX); + + /* Page count on RxQ */ + ok = 0; + i = 200; + while (i--) { + if ((mt76_rr(dev, 0x0430) & 0x00ff0000) || + (mt76_rr(dev, 0x0a30) & 0xffffffff) || + (mt76_rr(dev, 0x0a34) & 0xffffffff)) + ok++; + if (ok > 6) + break; + + msleep(1); + } + + if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 1000)) + dev_warn(dev->dev, "Warning: MAC RX did not stop!\n"); + + if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000)) + dev_warn(dev->dev, "Warning: RX DMA did not stop!\n"); +} + +void mt7601u_mac_stop(struct mt7601u_dev *dev) +{ + mt7601u_mac_stop_hw(dev); + flush_delayed_work(&dev->stat_work); + cancel_delayed_work_sync(&dev->stat_work); +} + +static void mt7601u_stop_hardware(struct mt7601u_dev *dev) +{ + mt7601u_chip_onoff(dev, false, false); +} + +int mt7601u_init_hardware(struct mt7601u_dev *dev) +{ + static const u16 beacon_offsets[16] = { + /* 512 byte per beacon */ + 0xc000, 0xc200, 0xc400, 0xc600, + 0xc800, 0xca00, 0xcc00, 0xce00, + 0xd000, 0xd200, 0xd400, 0xd600, + 0xd800, 0xda00, 0xdc00, 0xde00 + }; + int ret; + + dev->beacon_offsets = beacon_offsets; + + mt7601u_chip_onoff(dev, true, false); + + ret = mt7601u_wait_asic_ready(dev); + if (ret) + goto err; + ret = mt7601u_mcu_init(dev); + if (ret) + goto err; + + if (!mt76_poll_msec(dev, MT_WPDMA_GLO_CFG, + MT_WPDMA_GLO_CFG_TX_DMA_BUSY | + MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 100)) { + ret = -EIO; + goto err; + } + + /* Wait for ASIC ready after FW load. */ + ret = mt7601u_wait_asic_ready(dev); + if (ret) + goto err; + + mt7601u_reset_csr_bbp(dev); + mt7601u_init_usb_dma(dev); + + ret = mt7601u_mcu_cmd_init(dev); + if (ret) + goto err; + ret = mt7601u_dma_init(dev); + if (ret) + goto err_mcu; + ret = mt7601u_write_mac_initvals(dev); + if (ret) + goto err_rx; + + if (!mt76_poll_msec(dev, MT_MAC_STATUS, + MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, 0, 100)) { + ret = -EIO; + goto err_rx; + } + + ret = mt7601u_init_bbp(dev); + if (ret) + goto err_rx; + ret = mt7601u_init_wcid_mem(dev); + if (ret) + goto err_rx; + ret = mt7601u_init_key_mem(dev); + if (ret) + goto err_rx; + ret = mt7601u_init_wcid_attr_mem(dev); + if (ret) + goto err_rx; + + mt76_clear(dev, MT_BEACON_TIME_CFG, (MT_BEACON_TIME_CFG_TIMER_EN | + MT_BEACON_TIME_CFG_SYNC_MODE | + MT_BEACON_TIME_CFG_TBTT_EN | + MT_BEACON_TIME_CFG_BEACON_TX)); + + mt7601u_reset_counters(dev); + + mt7601u_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e); + + mt7601u_wr(dev, MT_TXOP_CTRL_CFG, MT76_SET(MT_TXOP_TRUN_EN, 0x3f) | + MT76_SET(MT_TXOP_EXT_CCA_DLY, 0x58)); + + ret = mt7601u_eeprom_init(dev); + if (ret) + goto err_rx; + + ret = mt7601u_phy_init(dev); + if (ret) + goto err_rx; + + mt7601u_set_rx_path(dev, 0); + mt7601u_set_tx_dac(dev, 0); + + mt7601u_mac_set_ctrlch(dev, false); + mt7601u_bbp_set_ctrlch(dev, false); + mt7601u_bbp_set_bw(dev, MT_BW_20); + + return 0; + +err_rx: + mt7601u_dma_cleanup(dev); +err_mcu: + mt7601u_mcu_cmd_deinit(dev); +err: + mt7601u_chip_onoff(dev, false, false); + return ret; +} + +void mt7601u_cleanup(struct mt7601u_dev *dev) +{ + if (!test_and_clear_bit(MT7601U_STATE_INITIALIZED, &dev->state)) + return; + + mt7601u_stop_hardware(dev); + mt7601u_dma_cleanup(dev); + mt7601u_mcu_cmd_deinit(dev); +} + +struct mt7601u_dev *mt7601u_alloc_device(struct device *pdev) +{ + struct ieee80211_hw *hw; + struct mt7601u_dev *dev; + + hw = ieee80211_alloc_hw(sizeof(*dev), &mt7601u_ops); + if (!hw) + return NULL; + + dev = hw->priv; + dev->dev = pdev; + dev->hw = hw; + mutex_init(&dev->vendor_req_mutex); + mutex_init(&dev->reg_atomic_mutex); + mutex_init(&dev->hw_atomic_mutex); + mutex_init(&dev->mutex); + spin_lock_init(&dev->tx_lock); + spin_lock_init(&dev->rx_lock); + spin_lock_init(&dev->lock); + spin_lock_init(&dev->con_mon_lock); + atomic_set(&dev->avg_ampdu_len, 1); + + dev->stat_wq = alloc_workqueue("mt7601u", WQ_UNBOUND, 0); + if (!dev->stat_wq) { + ieee80211_free_hw(hw); + return NULL; + } + + return dev; +} + +#define CHAN2G(_idx, _freq) { \ + .band = IEEE80211_BAND_2GHZ, \ + .center_freq = (_freq), \ + .hw_value = (_idx), \ + .max_power = 30, \ +} + +static const struct ieee80211_channel mt76_channels_2ghz[] = { + CHAN2G(1, 2412), + CHAN2G(2, 2417), + CHAN2G(3, 2422), + CHAN2G(4, 2427), + CHAN2G(5, 2432), + CHAN2G(6, 2437), + CHAN2G(7, 2442), + CHAN2G(8, 2447), + CHAN2G(9, 2452), + CHAN2G(10, 2457), + CHAN2G(11, 2462), + CHAN2G(12, 2467), + CHAN2G(13, 2472), + CHAN2G(14, 2484), +}; + +#define CCK_RATE(_idx, _rate) { \ + .bitrate = _rate, \ + .flags = IEEE80211_RATE_SHORT_PREAMBLE, \ + .hw_value = (MT_PHY_TYPE_CCK << 8) | _idx, \ + .hw_value_short = (MT_PHY_TYPE_CCK << 8) | (8 + _idx), \ +} + +#define OFDM_RATE(_idx, _rate) { \ + .bitrate = _rate, \ + .hw_value = (MT_PHY_TYPE_OFDM << 8) | _idx, \ + .hw_value_short = (MT_PHY_TYPE_OFDM << 8) | _idx, \ +} + +static struct ieee80211_rate mt76_rates[] = { + CCK_RATE(0, 10), + CCK_RATE(1, 20), + CCK_RATE(2, 55), + CCK_RATE(3, 110), + OFDM_RATE(0, 60), + OFDM_RATE(1, 90), + OFDM_RATE(2, 120), + OFDM_RATE(3, 180), + OFDM_RATE(4, 240), + OFDM_RATE(5, 360), + OFDM_RATE(6, 480), + OFDM_RATE(7, 540), +}; + +static int +mt76_init_sband(struct mt7601u_dev *dev, struct ieee80211_supported_band *sband, + const struct ieee80211_channel *chan, int n_chan, + struct ieee80211_rate *rates, int n_rates) +{ + struct ieee80211_sta_ht_cap *ht_cap; + void *chanlist; + int size; + + size = n_chan * sizeof(*chan); + chanlist = devm_kmemdup(dev->dev, chan, size, GFP_KERNEL); + if (!chanlist) + return -ENOMEM; + + sband->channels = chanlist; + sband->n_channels = n_chan; + sband->bitrates = rates; + sband->n_bitrates = n_rates; + + ht_cap = &sband->ht_cap; + ht_cap->ht_supported = true; + ht_cap->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_GRN_FLD | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT); + + ht_cap->mcs.rx_mask[0] = 0xff; + ht_cap->mcs.rx_mask[4] = 0x1; + ht_cap->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; + ht_cap->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; + ht_cap->ampdu_density = IEEE80211_HT_MPDU_DENSITY_2; + + dev->chandef.chan = &sband->channels[0]; + + return 0; +} + +static int +mt76_init_sband_2g(struct mt7601u_dev *dev) +{ + dev->sband_2g = devm_kzalloc(dev->dev, sizeof(*dev->sband_2g), + GFP_KERNEL); + dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = dev->sband_2g; + + WARN_ON(dev->ee->reg.start - 1 + dev->ee->reg.num > + ARRAY_SIZE(mt76_channels_2ghz)); + + return mt76_init_sband(dev, dev->sband_2g, + &mt76_channels_2ghz[dev->ee->reg.start - 1], + dev->ee->reg.num, + mt76_rates, ARRAY_SIZE(mt76_rates)); +} + +int mt7601u_register_device(struct mt7601u_dev *dev) +{ + struct ieee80211_hw *hw = dev->hw; + struct wiphy *wiphy = hw->wiphy; + int ret; + + /* Reserve WCID 0 for mcast - thanks to this APs WCID will go to + * entry no. 1 like it does in the vendor driver. + */ + dev->wcid_mask[0] |= 1; + + /* init fake wcid for monitor interfaces */ + dev->mon_wcid = devm_kmalloc(dev->dev, sizeof(*dev->mon_wcid), + GFP_KERNEL); + if (!dev->mon_wcid) + return -ENOMEM; + dev->mon_wcid->idx = 0xff; + dev->mon_wcid->hw_key_idx = -1; + + SET_IEEE80211_DEV(hw, dev->dev); + + hw->queues = 4; + hw->flags = IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_PS_NULLFUNC_STACK | + IEEE80211_HW_SUPPORTS_HT_CCK_RATES | + IEEE80211_HW_AMPDU_AGGREGATION | + IEEE80211_HW_SUPPORTS_RC_TABLE; + hw->max_rates = 1; + hw->max_report_rates = 7; + hw->max_rate_tries = 1; + + hw->sta_data_size = sizeof(struct mt76_sta); + hw->vif_data_size = sizeof(struct mt76_vif); + + SET_IEEE80211_PERM_ADDR(hw, dev->macaddr); + + wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR; + wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + + ret = mt76_init_sband_2g(dev); + if (ret) + return ret; + + INIT_DELAYED_WORK(&dev->mac_work, mt7601u_mac_work); + INIT_DELAYED_WORK(&dev->stat_work, mt7601u_tx_stat); + + ret = ieee80211_register_hw(hw); + if (ret) + return ret; + + mt7601u_init_debugfs(dev); + + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/initvals.h b/drivers/net/wireless/mediatek/mt7601u/initvals.h new file mode 100644 index 0000000000000..ec11ff66969d4 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/initvals.h @@ -0,0 +1,164 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_INITVALS_H +#define __MT7601U_INITVALS_H + +static const struct mt76_reg_pair bbp_common_vals[] = { + { 65, 0x2c }, + { 66, 0x38 }, + { 68, 0x0b }, + { 69, 0x12 }, + { 70, 0x0a }, + { 73, 0x10 }, + { 81, 0x37 }, + { 82, 0x62 }, + { 83, 0x6a }, + { 84, 0x99 }, + { 86, 0x00 }, + { 91, 0x04 }, + { 92, 0x00 }, + { 103, 0x00 }, + { 105, 0x05 }, + { 106, 0x35 }, +}; + +static const struct mt76_reg_pair bbp_chip_vals[] = { + { 1, 0x04 }, { 4, 0x40 }, { 20, 0x06 }, { 31, 0x08 }, + /* CCK Tx Control */ + { 178, 0xff }, + /* AGC/Sync controls */ + { 66, 0x14 }, { 68, 0x8b }, { 69, 0x12 }, { 70, 0x09 }, + { 73, 0x11 }, { 75, 0x60 }, { 76, 0x44 }, { 84, 0x9a }, + { 86, 0x38 }, { 91, 0x07 }, { 92, 0x02 }, + /* Rx Path Controls */ + { 99, 0x50 }, { 101, 0x00 }, { 103, 0xc0 }, { 104, 0x92 }, + { 105, 0x3c }, { 106, 0x03 }, { 128, 0x12 }, + /* Change RXWI content: Gain Report */ + { 142, 0x04 }, { 143, 0x37 }, + /* Change RXWI content: Antenna Report */ + { 142, 0x03 }, { 143, 0x99 }, + /* Calibration Index Register */ + /* CCK Receiver Control */ + { 160, 0xeb }, { 161, 0xc4 }, { 162, 0x77 }, { 163, 0xf9 }, + { 164, 0x88 }, { 165, 0x80 }, { 166, 0xff }, { 167, 0xe4 }, + /* Added AGC controls - these AGC/GLRT registers are accessed + * through R195 and R196. + */ + { 195, 0x00 }, { 196, 0x00 }, + { 195, 0x01 }, { 196, 0x04 }, + { 195, 0x02 }, { 196, 0x20 }, + { 195, 0x03 }, { 196, 0x0a }, + { 195, 0x06 }, { 196, 0x16 }, + { 195, 0x07 }, { 196, 0x05 }, + { 195, 0x08 }, { 196, 0x37 }, + { 195, 0x0a }, { 196, 0x15 }, + { 195, 0x0b }, { 196, 0x17 }, + { 195, 0x0c }, { 196, 0x06 }, + { 195, 0x0d }, { 196, 0x09 }, + { 195, 0x0e }, { 196, 0x05 }, + { 195, 0x0f }, { 196, 0x09 }, + { 195, 0x10 }, { 196, 0x20 }, + { 195, 0x20 }, { 196, 0x17 }, + { 195, 0x21 }, { 196, 0x06 }, + { 195, 0x22 }, { 196, 0x09 }, + { 195, 0x23 }, { 196, 0x17 }, + { 195, 0x24 }, { 196, 0x06 }, + { 195, 0x25 }, { 196, 0x09 }, + { 195, 0x26 }, { 196, 0x17 }, + { 195, 0x27 }, { 196, 0x06 }, + { 195, 0x28 }, { 196, 0x09 }, + { 195, 0x29 }, { 196, 0x05 }, + { 195, 0x2a }, { 196, 0x09 }, + { 195, 0x80 }, { 196, 0x8b }, + { 195, 0x81 }, { 196, 0x12 }, + { 195, 0x82 }, { 196, 0x09 }, + { 195, 0x83 }, { 196, 0x17 }, + { 195, 0x84 }, { 196, 0x11 }, + { 195, 0x85 }, { 196, 0x00 }, + { 195, 0x86 }, { 196, 0x00 }, + { 195, 0x87 }, { 196, 0x18 }, + { 195, 0x88 }, { 196, 0x60 }, + { 195, 0x89 }, { 196, 0x44 }, + { 195, 0x8a }, { 196, 0x8b }, + { 195, 0x8b }, { 196, 0x8b }, + { 195, 0x8c }, { 196, 0x8b }, + { 195, 0x8d }, { 196, 0x8b }, + { 195, 0x8e }, { 196, 0x09 }, + { 195, 0x8f }, { 196, 0x09 }, + { 195, 0x90 }, { 196, 0x09 }, + { 195, 0x91 }, { 196, 0x09 }, + { 195, 0x92 }, { 196, 0x11 }, + { 195, 0x93 }, { 196, 0x11 }, + { 195, 0x94 }, { 196, 0x11 }, + { 195, 0x95 }, { 196, 0x11 }, + /* PPAD */ + { 47, 0x80 }, { 60, 0x80 }, { 150, 0xd2 }, { 151, 0x32 }, + { 152, 0x23 }, { 153, 0x41 }, { 154, 0x00 }, { 155, 0x4f }, + { 253, 0x7e }, { 195, 0x30 }, { 196, 0x32 }, { 195, 0x31 }, + { 196, 0x23 }, { 195, 0x32 }, { 196, 0x45 }, { 195, 0x35 }, + { 196, 0x4a }, { 195, 0x36 }, { 196, 0x5a }, { 195, 0x37 }, + { 196, 0x5a }, +}; + +static const struct mt76_reg_pair mac_common_vals[] = { + { MT_LEGACY_BASIC_RATE, 0x0000013f }, + { MT_HT_BASIC_RATE, 0x00008003 }, + { MT_MAC_SYS_CTRL, 0x00000000 }, + { MT_RX_FILTR_CFG, 0x00017f97 }, + { MT_BKOFF_SLOT_CFG, 0x00000209 }, + { MT_TX_SW_CFG0, 0x00000000 }, + { MT_TX_SW_CFG1, 0x00080606 }, + { MT_TX_LINK_CFG, 0x00001020 }, + { MT_TX_TIMEOUT_CFG, 0x000a2090 }, + { MT_MAX_LEN_CFG, 0x00003fff }, + { MT_PBF_TX_MAX_PCNT, 0x1fbf1f1f }, + { MT_PBF_RX_MAX_PCNT, 0x0000009f }, + { MT_TX_RETRY_CFG, 0x47d01f0f }, + { MT_AUTO_RSP_CFG, 0x00000013 }, + { MT_CCK_PROT_CFG, 0x05740003 }, + { MT_OFDM_PROT_CFG, 0x05740003 }, + { MT_MM40_PROT_CFG, 0x03f44084 }, + { MT_GF20_PROT_CFG, 0x01744004 }, + { MT_GF40_PROT_CFG, 0x03f44084 }, + { MT_MM20_PROT_CFG, 0x01744004 }, + { MT_TXOP_CTRL_CFG, 0x0000583f }, + { MT_TX_RTS_CFG, 0x01092b20 }, + { MT_EXP_ACK_TIME, 0x002400ca }, + { MT_TXOP_HLDR_ET, 0x00000002 }, + { MT_XIFS_TIME_CFG, 0x33a41010 }, + { MT_PWR_PIN_CFG, 0x00000000 }, +}; + +static const struct mt76_reg_pair mac_chip_vals[] = { + { MT_TSO_CTRL, 0x00006050 }, + { MT_BCN_OFFSET(0), 0x18100800 }, + { MT_BCN_OFFSET(1), 0x38302820 }, + { MT_PBF_SYS_CTRL, 0x00080c00 }, + { MT_PBF_CFG, 0x7f723c1f }, + { MT_FCE_PSE_CTRL, 0x00000001 }, + { MT_PAUSE_ENABLE_CONTROL1, 0x00000000 }, + { MT_TX0_RF_GAIN_CORR, 0x003b0005 }, + { MT_TX0_RF_GAIN_ATTEN, 0x00006900 }, + { MT_TX0_BB_GAIN_ATTEN, 0x00000400 }, + { MT_TX_ALC_VGA3, 0x00060006 }, + { MT_TX_SW_CFG0, 0x00000402 }, + { MT_TX_SW_CFG1, 0x00000000 }, + { MT_TX_SW_CFG2, 0x00000000 }, + { MT_HEADER_TRANS_CTRL_REG, 0x00000000 }, + { MT_FCE_CSO, 0x0000030f }, + { MT_FCE_PARAMETERS, 0x00256f0f }, +}; + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/initvals_phy.h b/drivers/net/wireless/mediatek/mt7601u/initvals_phy.h new file mode 100644 index 0000000000000..a2bdc3e322bfc --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/initvals_phy.h @@ -0,0 +1,291 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_PHY_INITVALS_H +#define __MT7601U_PHY_INITVALS_H + +#define RF_REG_PAIR(bank, reg, value) \ + { MT_MCU_MEMMAP_RF | (bank) << 16 | (reg), value } + +static const struct mt76_reg_pair rf_central[] = { + /* Bank 0 - for central blocks: BG, PLL, XTAL, LO, ADC/DAC */ + RF_REG_PAIR(0, 0, 0x02), + RF_REG_PAIR(0, 1, 0x01), + RF_REG_PAIR(0, 2, 0x11), + RF_REG_PAIR(0, 3, 0xff), + RF_REG_PAIR(0, 4, 0x0a), + RF_REG_PAIR(0, 5, 0x20), + RF_REG_PAIR(0, 6, 0x00), + /* B/G */ + RF_REG_PAIR(0, 7, 0x00), + RF_REG_PAIR(0, 8, 0x00), + RF_REG_PAIR(0, 9, 0x00), + RF_REG_PAIR(0, 10, 0x00), + RF_REG_PAIR(0, 11, 0x21), + /* XO */ + RF_REG_PAIR(0, 13, 0x00), /* 40mhz xtal */ + /* RF_REG_PAIR(0, 13, 0x13), */ /* 20mhz xtal */ + RF_REG_PAIR(0, 14, 0x7c), + RF_REG_PAIR(0, 15, 0x22), + RF_REG_PAIR(0, 16, 0x80), + /* PLL */ + RF_REG_PAIR(0, 17, 0x99), + RF_REG_PAIR(0, 18, 0x99), + RF_REG_PAIR(0, 19, 0x09), + RF_REG_PAIR(0, 20, 0x50), + RF_REG_PAIR(0, 21, 0xb0), + RF_REG_PAIR(0, 22, 0x00), + RF_REG_PAIR(0, 23, 0xc5), + RF_REG_PAIR(0, 24, 0xfc), + RF_REG_PAIR(0, 25, 0x40), + RF_REG_PAIR(0, 26, 0x4d), + RF_REG_PAIR(0, 27, 0x02), + RF_REG_PAIR(0, 28, 0x72), + RF_REG_PAIR(0, 29, 0x01), + RF_REG_PAIR(0, 30, 0x00), + RF_REG_PAIR(0, 31, 0x00), + /* test ports */ + RF_REG_PAIR(0, 32, 0x00), + RF_REG_PAIR(0, 33, 0x00), + RF_REG_PAIR(0, 34, 0x23), + RF_REG_PAIR(0, 35, 0x01), /* change setting to reduce spurs */ + RF_REG_PAIR(0, 36, 0x00), + RF_REG_PAIR(0, 37, 0x00), + /* ADC/DAC */ + RF_REG_PAIR(0, 38, 0x00), + RF_REG_PAIR(0, 39, 0x20), + RF_REG_PAIR(0, 40, 0x00), + RF_REG_PAIR(0, 41, 0xd0), + RF_REG_PAIR(0, 42, 0x1b), + RF_REG_PAIR(0, 43, 0x02), + RF_REG_PAIR(0, 44, 0x00), +}; + +static const struct mt76_reg_pair rf_channel[] = { + RF_REG_PAIR(4, 0, 0x01), + RF_REG_PAIR(4, 1, 0x00), + RF_REG_PAIR(4, 2, 0x00), + RF_REG_PAIR(4, 3, 0x00), + /* LDO */ + RF_REG_PAIR(4, 4, 0x00), + RF_REG_PAIR(4, 5, 0x08), + RF_REG_PAIR(4, 6, 0x00), + /* RX */ + RF_REG_PAIR(4, 7, 0x5b), + RF_REG_PAIR(4, 8, 0x52), + RF_REG_PAIR(4, 9, 0xb6), + RF_REG_PAIR(4, 10, 0x57), + RF_REG_PAIR(4, 11, 0x33), + RF_REG_PAIR(4, 12, 0x22), + RF_REG_PAIR(4, 13, 0x3d), + RF_REG_PAIR(4, 14, 0x3e), + RF_REG_PAIR(4, 15, 0x13), + RF_REG_PAIR(4, 16, 0x22), + RF_REG_PAIR(4, 17, 0x23), + RF_REG_PAIR(4, 18, 0x02), + RF_REG_PAIR(4, 19, 0xa4), + RF_REG_PAIR(4, 20, 0x01), + RF_REG_PAIR(4, 21, 0x12), + RF_REG_PAIR(4, 22, 0x80), + RF_REG_PAIR(4, 23, 0xb3), + RF_REG_PAIR(4, 24, 0x00), /* reserved */ + RF_REG_PAIR(4, 25, 0x00), /* reserved */ + RF_REG_PAIR(4, 26, 0x00), /* reserved */ + RF_REG_PAIR(4, 27, 0x00), /* reserved */ + /* LOGEN */ + RF_REG_PAIR(4, 28, 0x18), + RF_REG_PAIR(4, 29, 0xee), + RF_REG_PAIR(4, 30, 0x6b), + RF_REG_PAIR(4, 31, 0x31), + RF_REG_PAIR(4, 32, 0x5d), + RF_REG_PAIR(4, 33, 0x00), /* reserved */ + /* TX */ + RF_REG_PAIR(4, 34, 0x96), + RF_REG_PAIR(4, 35, 0x55), + RF_REG_PAIR(4, 36, 0x08), + RF_REG_PAIR(4, 37, 0xbb), + RF_REG_PAIR(4, 38, 0xb3), + RF_REG_PAIR(4, 39, 0xb3), + RF_REG_PAIR(4, 40, 0x03), + RF_REG_PAIR(4, 41, 0x00), /* reserved */ + RF_REG_PAIR(4, 42, 0x00), /* reserved */ + RF_REG_PAIR(4, 43, 0xc5), + RF_REG_PAIR(4, 44, 0xc5), + RF_REG_PAIR(4, 45, 0xc5), + RF_REG_PAIR(4, 46, 0x07), + RF_REG_PAIR(4, 47, 0xa8), + RF_REG_PAIR(4, 48, 0xef), + RF_REG_PAIR(4, 49, 0x1a), + /* PA */ + RF_REG_PAIR(4, 54, 0x07), + RF_REG_PAIR(4, 55, 0xa7), + RF_REG_PAIR(4, 56, 0xcc), + RF_REG_PAIR(4, 57, 0x14), + RF_REG_PAIR(4, 58, 0x07), + RF_REG_PAIR(4, 59, 0xa8), + RF_REG_PAIR(4, 60, 0xd7), + RF_REG_PAIR(4, 61, 0x10), + RF_REG_PAIR(4, 62, 0x1c), + RF_REG_PAIR(4, 63, 0x00), /* reserved */ +}; + +static const struct mt76_reg_pair rf_vga[] = { + RF_REG_PAIR(5, 0, 0x47), + RF_REG_PAIR(5, 1, 0x00), + RF_REG_PAIR(5, 2, 0x00), + RF_REG_PAIR(5, 3, 0x08), + RF_REG_PAIR(5, 4, 0x04), + RF_REG_PAIR(5, 5, 0x20), + RF_REG_PAIR(5, 6, 0x3a), + RF_REG_PAIR(5, 7, 0x3a), + RF_REG_PAIR(5, 8, 0x00), + RF_REG_PAIR(5, 9, 0x00), + RF_REG_PAIR(5, 10, 0x10), + RF_REG_PAIR(5, 11, 0x10), + RF_REG_PAIR(5, 12, 0x10), + RF_REG_PAIR(5, 13, 0x10), + RF_REG_PAIR(5, 14, 0x10), + RF_REG_PAIR(5, 15, 0x20), + RF_REG_PAIR(5, 16, 0x22), + RF_REG_PAIR(5, 17, 0x7c), + RF_REG_PAIR(5, 18, 0x00), + RF_REG_PAIR(5, 19, 0x00), + RF_REG_PAIR(5, 20, 0x00), + RF_REG_PAIR(5, 21, 0xf1), + RF_REG_PAIR(5, 22, 0x11), + RF_REG_PAIR(5, 23, 0x02), + RF_REG_PAIR(5, 24, 0x41), + RF_REG_PAIR(5, 25, 0x20), + RF_REG_PAIR(5, 26, 0x00), + RF_REG_PAIR(5, 27, 0xd7), + RF_REG_PAIR(5, 28, 0xa2), + RF_REG_PAIR(5, 29, 0x20), + RF_REG_PAIR(5, 30, 0x49), + RF_REG_PAIR(5, 31, 0x20), + RF_REG_PAIR(5, 32, 0x04), + RF_REG_PAIR(5, 33, 0xf1), + RF_REG_PAIR(5, 34, 0xa1), + RF_REG_PAIR(5, 35, 0x01), + RF_REG_PAIR(5, 41, 0x00), + RF_REG_PAIR(5, 42, 0x00), + RF_REG_PAIR(5, 43, 0x00), + RF_REG_PAIR(5, 44, 0x00), + RF_REG_PAIR(5, 45, 0x00), + RF_REG_PAIR(5, 46, 0x00), + RF_REG_PAIR(5, 47, 0x00), + RF_REG_PAIR(5, 48, 0x00), + RF_REG_PAIR(5, 49, 0x00), + RF_REG_PAIR(5, 50, 0x00), + RF_REG_PAIR(5, 51, 0x00), + RF_REG_PAIR(5, 52, 0x00), + RF_REG_PAIR(5, 53, 0x00), + RF_REG_PAIR(5, 54, 0x00), + RF_REG_PAIR(5, 55, 0x00), + RF_REG_PAIR(5, 56, 0x00), + RF_REG_PAIR(5, 57, 0x00), + RF_REG_PAIR(5, 58, 0x31), + RF_REG_PAIR(5, 59, 0x31), + RF_REG_PAIR(5, 60, 0x0a), + RF_REG_PAIR(5, 61, 0x02), + RF_REG_PAIR(5, 62, 0x00), + RF_REG_PAIR(5, 63, 0x00), +}; + +/* TODO: BBP178 is set to 0xff for "CCK CH14 OBW" which overrides the settings + * from channel switching. Seems stupid at best. + */ +static const struct mt76_reg_pair bbp_high_temp[] = { + { 75, 0x60 }, + { 92, 0x02 }, + { 178, 0xff }, /* For CCK CH14 OBW */ + { 195, 0x88 }, { 196, 0x60 }, +}, bbp_high_temp_bw20[] = { + { 69, 0x12 }, + { 91, 0x07 }, + { 195, 0x23 }, { 196, 0x17 }, + { 195, 0x24 }, { 196, 0x06 }, + { 195, 0x81 }, { 196, 0x12 }, + { 195, 0x83 }, { 196, 0x17 }, +}, bbp_high_temp_bw40[] = { + { 69, 0x15 }, + { 91, 0x04 }, + { 195, 0x23 }, { 196, 0x12 }, + { 195, 0x24 }, { 196, 0x08 }, + { 195, 0x81 }, { 196, 0x15 }, + { 195, 0x83 }, { 196, 0x16 }, +}, bbp_low_temp[] = { + { 178, 0xff }, /* For CCK CH14 OBW */ +}, bbp_low_temp_bw20[] = { + { 69, 0x12 }, + { 75, 0x5e }, + { 91, 0x07 }, + { 92, 0x02 }, + { 195, 0x23 }, { 196, 0x17 }, + { 195, 0x24 }, { 196, 0x06 }, + { 195, 0x81 }, { 196, 0x12 }, + { 195, 0x83 }, { 196, 0x17 }, + { 195, 0x88 }, { 196, 0x5e }, +}, bbp_low_temp_bw40[] = { + { 69, 0x15 }, + { 75, 0x5c }, + { 91, 0x04 }, + { 92, 0x03 }, + { 195, 0x23 }, { 196, 0x10 }, + { 195, 0x24 }, { 196, 0x08 }, + { 195, 0x81 }, { 196, 0x15 }, + { 195, 0x83 }, { 196, 0x16 }, + { 195, 0x88 }, { 196, 0x5b }, +}, bbp_normal_temp[] = { + { 75, 0x60 }, + { 92, 0x02 }, + { 178, 0xff }, /* For CCK CH14 OBW */ + { 195, 0x88 }, { 196, 0x60 }, +}, bbp_normal_temp_bw20[] = { + { 69, 0x12 }, + { 91, 0x07 }, + { 195, 0x23 }, { 196, 0x17 }, + { 195, 0x24 }, { 196, 0x06 }, + { 195, 0x81 }, { 196, 0x12 }, + { 195, 0x83 }, { 196, 0x17 }, +}, bbp_normal_temp_bw40[] = { + { 69, 0x15 }, + { 91, 0x04 }, + { 195, 0x23 }, { 196, 0x12 }, + { 195, 0x24 }, { 196, 0x08 }, + { 195, 0x81 }, { 196, 0x15 }, + { 195, 0x83 }, { 196, 0x16 }, +}; + +#define BBP_TABLE(arr) { arr, ARRAY_SIZE(arr), } + +static const struct reg_table { + const struct mt76_reg_pair *regs; + size_t n; +} bbp_mode_table[3][3] = { + { + BBP_TABLE(bbp_normal_temp_bw20), + BBP_TABLE(bbp_normal_temp_bw40), + BBP_TABLE(bbp_normal_temp), + }, { + BBP_TABLE(bbp_high_temp_bw20), + BBP_TABLE(bbp_high_temp_bw40), + BBP_TABLE(bbp_high_temp), + }, { + BBP_TABLE(bbp_low_temp_bw20), + BBP_TABLE(bbp_low_temp_bw40), + BBP_TABLE(bbp_low_temp), + } +}; + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/mac.c b/drivers/net/wireless/mediatek/mt7601u/mac.c new file mode 100644 index 0000000000000..7514bce1ac91d --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mac.c @@ -0,0 +1,573 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "trace.h" +#include + +static void +mt76_mac_process_tx_rate(struct ieee80211_tx_rate *txrate, u16 rate) +{ + u8 idx = MT76_GET(MT_TXWI_RATE_MCS, rate); + + txrate->idx = 0; + txrate->flags = 0; + txrate->count = 1; + + switch (MT76_GET(MT_TXWI_RATE_PHY_MODE, rate)) { + case MT_PHY_TYPE_OFDM: + txrate->idx = idx + 4; + return; + case MT_PHY_TYPE_CCK: + if (idx >= 8) + idx -= 8; + + txrate->idx = idx; + return; + case MT_PHY_TYPE_HT_GF: + txrate->flags |= IEEE80211_TX_RC_GREEN_FIELD; + /* fall through */ + case MT_PHY_TYPE_HT: + txrate->flags |= IEEE80211_TX_RC_MCS; + txrate->idx = idx; + break; + default: + WARN_ON(1); + return; + } + + if (MT76_GET(MT_TXWI_RATE_BW, rate) == MT_PHY_BW_40) + txrate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; + + if (rate & MT_TXWI_RATE_SGI) + txrate->flags |= IEEE80211_TX_RC_SHORT_GI; +} + +static void +mt76_mac_fill_tx_status(struct mt7601u_dev *dev, struct ieee80211_tx_info *info, + struct mt76_tx_status *st) +{ + struct ieee80211_tx_rate *rate = info->status.rates; + int cur_idx, last_rate; + int i; + + last_rate = min_t(int, st->retry, IEEE80211_TX_MAX_RATES - 1); + mt76_mac_process_tx_rate(&rate[last_rate], st->rate); + if (last_rate < IEEE80211_TX_MAX_RATES - 1) + rate[last_rate + 1].idx = -1; + + cur_idx = rate[last_rate].idx + st->retry; + for (i = 0; i <= last_rate; i++) { + rate[i].flags = rate[last_rate].flags; + rate[i].idx = max_t(int, 0, cur_idx - i); + rate[i].count = 1; + } + + if (last_rate > 0) + rate[last_rate - 1].count = st->retry + 1 - last_rate; + + info->status.ampdu_len = 1; + info->status.ampdu_ack_len = st->success; + + if (st->is_probe) + info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; + + if (st->aggr) + info->flags |= IEEE80211_TX_CTL_AMPDU | + IEEE80211_TX_STAT_AMPDU; + + if (!st->ack_req) + info->flags |= IEEE80211_TX_CTL_NO_ACK; + else if (st->success) + info->flags |= IEEE80211_TX_STAT_ACK; +} + +u16 mt76_mac_tx_rate_val(struct mt7601u_dev *dev, + const struct ieee80211_tx_rate *rate, u8 *nss_val) +{ + u16 rateval; + u8 phy, rate_idx; + u8 nss = 1; + u8 bw = 0; + + if (rate->flags & IEEE80211_TX_RC_MCS) { + rate_idx = rate->idx; + nss = 1 + (rate->idx >> 3); + phy = MT_PHY_TYPE_HT; + if (rate->flags & IEEE80211_TX_RC_GREEN_FIELD) + phy = MT_PHY_TYPE_HT_GF; + if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + bw = 1; + } else { + const struct ieee80211_rate *r; + int band = dev->chandef.chan->band; + u16 val; + + r = &dev->hw->wiphy->bands[band]->bitrates[rate->idx]; + if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + val = r->hw_value_short; + else + val = r->hw_value; + + phy = val >> 8; + rate_idx = val & 0xff; + bw = 0; + } + + rateval = MT76_SET(MT_RXWI_RATE_MCS, rate_idx); + rateval |= MT76_SET(MT_RXWI_RATE_PHY, phy); + rateval |= MT76_SET(MT_RXWI_RATE_BW, bw); + if (rate->flags & IEEE80211_TX_RC_SHORT_GI) + rateval |= MT_RXWI_RATE_SGI; + + *nss_val = nss; + return rateval; +} + +void mt76_mac_wcid_set_rate(struct mt7601u_dev *dev, struct mt76_wcid *wcid, + const struct ieee80211_tx_rate *rate) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + wcid->tx_rate = mt76_mac_tx_rate_val(dev, rate, &wcid->tx_rate_nss); + wcid->tx_rate_set = true; + spin_unlock_irqrestore(&dev->lock, flags); +} + +struct mt76_tx_status mt7601u_mac_fetch_tx_status(struct mt7601u_dev *dev) +{ + struct mt76_tx_status stat = {}; + u32 val; + + val = mt7601u_rr(dev, MT_TX_STAT_FIFO); + stat.valid = !!(val & MT_TX_STAT_FIFO_VALID); + stat.success = !!(val & MT_TX_STAT_FIFO_SUCCESS); + stat.aggr = !!(val & MT_TX_STAT_FIFO_AGGR); + stat.ack_req = !!(val & MT_TX_STAT_FIFO_ACKREQ); + stat.pktid = MT76_GET(MT_TX_STAT_FIFO_PID_TYPE, val); + stat.wcid = MT76_GET(MT_TX_STAT_FIFO_WCID, val); + stat.rate = MT76_GET(MT_TX_STAT_FIFO_RATE, val); + + return stat; +} + +void mt76_send_tx_status(struct mt7601u_dev *dev, struct mt76_tx_status *stat) +{ + struct ieee80211_tx_info info = {}; + struct ieee80211_sta *sta = NULL; + struct mt76_wcid *wcid = NULL; + void *msta; + + rcu_read_lock(); + if (stat->wcid < ARRAY_SIZE(dev->wcid)) + wcid = rcu_dereference(dev->wcid[stat->wcid]); + + if (wcid) { + msta = container_of(wcid, struct mt76_sta, wcid); + sta = container_of(msta, struct ieee80211_sta, + drv_priv); + } + + mt76_mac_fill_tx_status(dev, &info, stat); + ieee80211_tx_status_noskb(dev->hw, sta, &info); + rcu_read_unlock(); +} + +void mt7601u_mac_set_protection(struct mt7601u_dev *dev, bool legacy_prot, + int ht_mode) +{ + int mode = ht_mode & IEEE80211_HT_OP_MODE_PROTECTION; + bool non_gf = !!(ht_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + u32 prot[6]; + bool ht_rts[4] = {}; + int i; + + prot[0] = MT_PROT_NAV_SHORT | + MT_PROT_TXOP_ALLOW_ALL | + MT_PROT_RTS_THR_EN; + prot[1] = prot[0]; + if (legacy_prot) + prot[1] |= MT_PROT_CTRL_CTS2SELF; + + prot[2] = prot[4] = MT_PROT_NAV_SHORT | MT_PROT_TXOP_ALLOW_BW20; + prot[3] = prot[5] = MT_PROT_NAV_SHORT | MT_PROT_TXOP_ALLOW_ALL; + + if (legacy_prot) { + prot[2] |= MT_PROT_RATE_CCK_11; + prot[3] |= MT_PROT_RATE_CCK_11; + prot[4] |= MT_PROT_RATE_CCK_11; + prot[5] |= MT_PROT_RATE_CCK_11; + } else { + prot[2] |= MT_PROT_RATE_OFDM_24; + prot[3] |= MT_PROT_RATE_DUP_OFDM_24; + prot[4] |= MT_PROT_RATE_OFDM_24; + prot[5] |= MT_PROT_RATE_DUP_OFDM_24; + } + + switch (mode) { + case IEEE80211_HT_OP_MODE_PROTECTION_NONE: + break; + + case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER: + ht_rts[0] = ht_rts[1] = ht_rts[2] = ht_rts[3] = true; + break; + + case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ: + ht_rts[1] = ht_rts[3] = true; + break; + + case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED: + ht_rts[0] = ht_rts[1] = ht_rts[2] = ht_rts[3] = true; + break; + } + + if (non_gf) + ht_rts[2] = ht_rts[3] = true; + + for (i = 0; i < 4; i++) + if (ht_rts[i]) + prot[i + 2] |= MT_PROT_CTRL_RTS_CTS; + + for (i = 0; i < 6; i++) + mt7601u_wr(dev, MT_CCK_PROT_CFG + i * 4, prot[i]); +} + +void mt7601u_mac_set_short_preamble(struct mt7601u_dev *dev, bool short_preamb) +{ + if (short_preamb) + mt76_set(dev, MT_AUTO_RSP_CFG, MT_AUTO_RSP_PREAMB_SHORT); + else + mt76_clear(dev, MT_AUTO_RSP_CFG, MT_AUTO_RSP_PREAMB_SHORT); +} + +void mt7601u_mac_config_tsf(struct mt7601u_dev *dev, bool enable, int interval) +{ + u32 val = mt7601u_rr(dev, MT_BEACON_TIME_CFG); + + val &= ~(MT_BEACON_TIME_CFG_TIMER_EN | + MT_BEACON_TIME_CFG_SYNC_MODE | + MT_BEACON_TIME_CFG_TBTT_EN); + + if (!enable) { + mt7601u_wr(dev, MT_BEACON_TIME_CFG, val); + return; + } + + val &= ~MT_BEACON_TIME_CFG_INTVAL; + val |= MT76_SET(MT_BEACON_TIME_CFG_INTVAL, interval << 4) | + MT_BEACON_TIME_CFG_TIMER_EN | + MT_BEACON_TIME_CFG_SYNC_MODE | + MT_BEACON_TIME_CFG_TBTT_EN; +} + +static void mt7601u_check_mac_err(struct mt7601u_dev *dev) +{ + u32 val = mt7601u_rr(dev, 0x10f4); + + if (!(val & BIT(29)) || !(val & (BIT(7) | BIT(5)))) + return; + + dev_err(dev->dev, "Error: MAC specific condition occurred\n"); + + mt76_set(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_RESET_CSR); + udelay(10); + mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_RESET_CSR); +} + +void mt7601u_mac_work(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + mac_work.work); + struct { + u32 addr_base; + u32 span; + u64 *stat_base; + } spans[] = { + { MT_RX_STA_CNT0, 3, dev->stats.rx_stat }, + { MT_TX_STA_CNT0, 3, dev->stats.tx_stat }, + { MT_TX_AGG_STAT, 1, dev->stats.aggr_stat }, + { MT_MPDU_DENSITY_CNT, 1, dev->stats.zero_len_del }, + { MT_TX_AGG_CNT_BASE0, 8, &dev->stats.aggr_n[0] }, + { MT_TX_AGG_CNT_BASE1, 8, &dev->stats.aggr_n[16] }, + }; + u32 sum, n; + int i, j, k; + + /* Note: using MCU_RANDOM_READ is actually slower then reading all the + * registers by hand. MCU takes ca. 20ms to complete read of 24 + * registers while reading them one by one will takes roughly + * 24*200us =~ 5ms. + */ + + k = 0; + n = 0; + sum = 0; + for (i = 0; i < ARRAY_SIZE(spans); i++) + for (j = 0; j < spans[i].span; j++) { + u32 val = mt7601u_rr(dev, spans[i].addr_base + j * 4); + + spans[i].stat_base[j * 2] += val & 0xffff; + spans[i].stat_base[j * 2 + 1] += val >> 16; + + /* Calculate average AMPDU length */ + if (spans[i].addr_base != MT_TX_AGG_CNT_BASE0 && + spans[i].addr_base != MT_TX_AGG_CNT_BASE1) + continue; + + n += (val >> 16) + (val & 0xffff); + sum += (val & 0xffff) * (1 + k * 2) + + (val >> 16) * (2 + k * 2); + k++; + } + + atomic_set(&dev->avg_ampdu_len, n ? DIV_ROUND_CLOSEST(sum, n) : 1); + + mt7601u_check_mac_err(dev); + + ieee80211_queue_delayed_work(dev->hw, &dev->mac_work, 10 * HZ); +} + +void +mt7601u_mac_wcid_setup(struct mt7601u_dev *dev, u8 idx, u8 vif_idx, u8 *mac) +{ + u8 zmac[ETH_ALEN] = {}; + u32 attr; + + attr = MT76_SET(MT_WCID_ATTR_BSS_IDX, vif_idx & 7) | + MT76_SET(MT_WCID_ATTR_BSS_IDX_EXT, !!(vif_idx & 8)); + + mt76_wr(dev, MT_WCID_ATTR(idx), attr); + + if (mac) + memcpy(zmac, mac, sizeof(zmac)); + + mt7601u_addr_wr(dev, MT_WCID_ADDR(idx), zmac); +} + +void mt7601u_mac_set_ampdu_factor(struct mt7601u_dev *dev) +{ + struct ieee80211_sta *sta; + struct mt76_wcid *wcid; + void *msta; + u8 min_factor = 3; + int i; + + rcu_read_lock(); + for (i = 0; i < ARRAY_SIZE(dev->wcid); i++) { + wcid = rcu_dereference(dev->wcid[i]); + if (!wcid) + continue; + + msta = container_of(wcid, struct mt76_sta, wcid); + sta = container_of(msta, struct ieee80211_sta, drv_priv); + + min_factor = min(min_factor, sta->ht_cap.ampdu_factor); + } + rcu_read_unlock(); + + mt7601u_wr(dev, MT_MAX_LEN_CFG, 0xa0fff | + MT76_SET(MT_MAX_LEN_CFG_AMPDU, min_factor)); +} + +static void +mt76_mac_process_rate(struct ieee80211_rx_status *status, u16 rate) +{ + u8 idx = MT76_GET(MT_RXWI_RATE_MCS, rate); + + switch (MT76_GET(MT_RXWI_RATE_PHY, rate)) { + case MT_PHY_TYPE_OFDM: + if (WARN_ON(idx >= 8)) + idx = 0; + idx += 4; + + status->rate_idx = idx; + return; + case MT_PHY_TYPE_CCK: + if (idx >= 8) { + idx -= 8; + status->flag |= RX_FLAG_SHORTPRE; + } + + if (WARN_ON(idx >= 4)) + idx = 0; + + status->rate_idx = idx; + return; + case MT_PHY_TYPE_HT_GF: + status->flag |= RX_FLAG_HT_GF; + /* fall through */ + case MT_PHY_TYPE_HT: + status->flag |= RX_FLAG_HT; + status->rate_idx = idx; + break; + default: + WARN_ON(1); + return; + } + + if (rate & MT_RXWI_RATE_SGI) + status->flag |= RX_FLAG_SHORT_GI; + + if (rate & MT_RXWI_RATE_STBC) + status->flag |= 1 << RX_FLAG_STBC_SHIFT; + + if (rate & MT_RXWI_RATE_BW) + status->flag |= RX_FLAG_40MHZ; +} + +static void +mt7601u_rx_monitor_beacon(struct mt7601u_dev *dev, struct mt7601u_rxwi *rxwi, + u16 rate, int rssi) +{ + dev->bcn_freq_off = rxwi->freq_off; + dev->bcn_phy_mode = MT76_GET(MT_RXWI_RATE_PHY, rate); + dev->avg_rssi = (dev->avg_rssi * 15) / 16 + (rssi << 8); +} + +static int +mt7601u_rx_is_our_beacon(struct mt7601u_dev *dev, u8 *data) +{ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)data; + + return ieee80211_is_beacon(hdr->frame_control) && + ether_addr_equal(hdr->addr2, dev->ap_bssid); +} + +u32 mt76_mac_process_rx(struct mt7601u_dev *dev, struct sk_buff *skb, + u8 *data, void *rxi) +{ + struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); + struct mt7601u_rxwi *rxwi = rxi; + u32 len, ctl = le32_to_cpu(rxwi->ctl); + u16 rate = le16_to_cpu(rxwi->rate); + int rssi; + + len = MT76_GET(MT_RXWI_CTL_MPDU_LEN, ctl); + if (len < 10) + return 0; + + if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_DECRYPT)) { + status->flag |= RX_FLAG_DECRYPTED; + status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED; + } + + status->chains = BIT(0); + rssi = mt7601u_phy_get_rssi(dev, rxwi, rate); + status->chain_signal[0] = status->signal = rssi; + status->freq = dev->chandef.chan->center_freq; + status->band = dev->chandef.chan->band; + + mt76_mac_process_rate(status, rate); + + spin_lock_bh(&dev->con_mon_lock); + if (mt7601u_rx_is_our_beacon(dev, data)) + mt7601u_rx_monitor_beacon(dev, rxwi, rate, rssi); + else if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_U2M)) + dev->avg_rssi = (dev->avg_rssi * 15) / 16 + (rssi << 8); + spin_unlock_bh(&dev->con_mon_lock); + + return len; +} + +static enum mt76_cipher_type +mt76_mac_get_key_info(struct ieee80211_key_conf *key, u8 *key_data) +{ + memset(key_data, 0, 32); + if (!key) + return MT_CIPHER_NONE; + + if (key->keylen > 32) + return MT_CIPHER_NONE; + + memcpy(key_data, key->key, key->keylen); + + switch (key->cipher) { + case WLAN_CIPHER_SUITE_WEP40: + return MT_CIPHER_WEP40; + case WLAN_CIPHER_SUITE_WEP104: + return MT_CIPHER_WEP104; + case WLAN_CIPHER_SUITE_TKIP: + return MT_CIPHER_TKIP; + case WLAN_CIPHER_SUITE_CCMP: + return MT_CIPHER_AES_CCMP; + default: + return MT_CIPHER_NONE; + } +} + +int mt76_mac_wcid_set_key(struct mt7601u_dev *dev, u8 idx, + struct ieee80211_key_conf *key) +{ + enum mt76_cipher_type cipher; + u8 key_data[32]; + u8 iv_data[8]; + u32 val; + + cipher = mt76_mac_get_key_info(key, key_data); + if (cipher == MT_CIPHER_NONE && key) + return -EINVAL; + + trace_set_key(dev, idx); + + mt7601u_wr_copy(dev, MT_WCID_KEY(idx), key_data, sizeof(key_data)); + + memset(iv_data, 0, sizeof(iv_data)); + if (key) { + iv_data[3] = key->keyidx << 6; + if (cipher >= MT_CIPHER_TKIP) { + /* Note: start with 1 to comply with spec, + * (see comment on common/cmm_wpa.c:4291). + */ + iv_data[0] |= 1; + iv_data[3] |= 0x20; + } + } + mt7601u_wr_copy(dev, MT_WCID_IV(idx), iv_data, sizeof(iv_data)); + + val = mt7601u_rr(dev, MT_WCID_ATTR(idx)); + val &= ~MT_WCID_ATTR_PKEY_MODE & ~MT_WCID_ATTR_PKEY_MODE_EXT; + val |= MT76_SET(MT_WCID_ATTR_PKEY_MODE, cipher & 7) | + MT76_SET(MT_WCID_ATTR_PKEY_MODE_EXT, cipher >> 3); + val &= ~MT_WCID_ATTR_PAIRWISE; + val |= MT_WCID_ATTR_PAIRWISE * + !!(key && key->flags & IEEE80211_KEY_FLAG_PAIRWISE); + mt7601u_wr(dev, MT_WCID_ATTR(idx), val); + + return 0; +} + +int mt76_mac_shared_key_setup(struct mt7601u_dev *dev, u8 vif_idx, u8 key_idx, + struct ieee80211_key_conf *key) +{ + enum mt76_cipher_type cipher; + u8 key_data[32]; + u32 val; + + cipher = mt76_mac_get_key_info(key, key_data); + if (cipher == MT_CIPHER_NONE && key) + return -EINVAL; + + trace_set_shared_key(dev, vif_idx, key_idx); + + mt7601u_wr_copy(dev, MT_SKEY(vif_idx, key_idx), + key_data, sizeof(key_data)); + + val = mt76_rr(dev, MT_SKEY_MODE(vif_idx)); + val &= ~(MT_SKEY_MODE_MASK << MT_SKEY_MODE_SHIFT(vif_idx, key_idx)); + val |= cipher << MT_SKEY_MODE_SHIFT(vif_idx, key_idx); + mt76_wr(dev, MT_SKEY_MODE(vif_idx), val); + + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/mac.h b/drivers/net/wireless/mediatek/mt7601u/mac.h new file mode 100644 index 0000000000000..2c22d63c63a22 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mac.h @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT76_MAC_H +#define __MT76_MAC_H + +struct mt76_tx_status { + u8 valid:1; + u8 success:1; + u8 aggr:1; + u8 ack_req:1; + u8 is_probe:1; + u8 wcid; + u8 pktid; + u8 retry; + u16 rate; +} __packed __aligned(2); + +/* Note: values in original "RSSI" and "SNR" fields are not actually what they + * are called for MT7601U, names used by this driver are educated guesses + * (see vendor mac/ral_omac.c). + */ +struct mt7601u_rxwi { + __le32 rxinfo; + + __le32 ctl; + + __le16 frag_sn; + __le16 rate; + + u8 unknown; + u8 zero[3]; + + u8 snr; + u8 ant; + u8 gain; + u8 freq_off; + + __le32 resv2; + __le32 expert_ant; +} __packed __aligned(4); + +#define MT_RXINFO_BA BIT(0) +#define MT_RXINFO_DATA BIT(1) +#define MT_RXINFO_NULL BIT(2) +#define MT_RXINFO_FRAG BIT(3) +#define MT_RXINFO_U2M BIT(4) +#define MT_RXINFO_MULTICAST BIT(5) +#define MT_RXINFO_BROADCAST BIT(6) +#define MT_RXINFO_MYBSS BIT(7) +#define MT_RXINFO_CRCERR BIT(8) +#define MT_RXINFO_ICVERR BIT(9) +#define MT_RXINFO_MICERR BIT(10) +#define MT_RXINFO_AMSDU BIT(11) +#define MT_RXINFO_HTC BIT(12) +#define MT_RXINFO_RSSI BIT(13) +#define MT_RXINFO_L2PAD BIT(14) +#define MT_RXINFO_AMPDU BIT(15) +#define MT_RXINFO_DECRYPT BIT(16) +#define MT_RXINFO_BSSIDX3 BIT(17) +#define MT_RXINFO_WAPI_KEY BIT(18) +#define MT_RXINFO_PN_LEN GENMASK(21, 19) +#define MT_RXINFO_SW_PKT_80211 BIT(22) +#define MT_RXINFO_TCP_SUM_BYPASS BIT(28) +#define MT_RXINFO_IP_SUM_BYPASS BIT(29) +#define MT_RXINFO_TCP_SUM_ERR BIT(30) +#define MT_RXINFO_IP_SUM_ERR BIT(31) + +#define MT_RXWI_CTL_WCID GENMASK(7, 0) +#define MT_RXWI_CTL_KEY_IDX GENMASK(9, 8) +#define MT_RXWI_CTL_BSS_IDX GENMASK(12, 10) +#define MT_RXWI_CTL_UDF GENMASK(15, 13) +#define MT_RXWI_CTL_MPDU_LEN GENMASK(27, 16) +#define MT_RXWI_CTL_TID GENMASK(31, 28) + +#define MT_RXWI_FRAG GENMASK(3, 0) +#define MT_RXWI_SN GENMASK(15, 4) + +#define MT_RXWI_RATE_MCS GENMASK(6, 0) +#define MT_RXWI_RATE_BW BIT(7) +#define MT_RXWI_RATE_SGI BIT(8) +#define MT_RXWI_RATE_STBC GENMASK(10, 9) +#define MT_RXWI_RATE_ETXBF BIT(11) +#define MT_RXWI_RATE_SND BIT(12) +#define MT_RXWI_RATE_ITXBF BIT(13) +#define MT_RXWI_RATE_PHY GENMASK(15, 14) + +#define MT_RXWI_GAIN_RSSI_VAL GENMASK(5, 0) +#define MT_RXWI_GAIN_RSSI_LNA_ID GENMASK(7, 6) +#define MT_RXWI_ANT_AUX_LNA BIT(7) + +#define MT_RXWI_EANT_ENC_ANT_ID GENMASK(7, 0) + +enum mt76_phy_type { + MT_PHY_TYPE_CCK, + MT_PHY_TYPE_OFDM, + MT_PHY_TYPE_HT, + MT_PHY_TYPE_HT_GF, +}; + +enum mt76_phy_bandwidth { + MT_PHY_BW_20, + MT_PHY_BW_40, +}; + +struct mt76_txwi { + __le16 flags; + __le16 rate_ctl; + + u8 ack_ctl; + u8 wcid; + __le16 len_ctl; + + __le32 iv; + + __le32 eiv; + + u8 aid; + u8 txstream; + __le16 ctl; +} __packed __aligned(4); + +#define MT_TXWI_FLAGS_FRAG BIT(0) +#define MT_TXWI_FLAGS_MMPS BIT(1) +#define MT_TXWI_FLAGS_CFACK BIT(2) +#define MT_TXWI_FLAGS_TS BIT(3) +#define MT_TXWI_FLAGS_AMPDU BIT(4) +#define MT_TXWI_FLAGS_MPDU_DENSITY GENMASK(7, 5) +#define MT_TXWI_FLAGS_TXOP GENMASK(9, 8) +#define MT_TXWI_FLAGS_CWMIN GENMASK(12, 10) +#define MT_TXWI_FLAGS_NO_RATE_FALLBACK BIT(13) +#define MT_TXWI_FLAGS_TX_RPT BIT(14) +#define MT_TXWI_FLAGS_TX_RATE_LUT BIT(15) + +#define MT_TXWI_RATE_MCS GENMASK(6, 0) +#define MT_TXWI_RATE_BW BIT(7) +#define MT_TXWI_RATE_SGI BIT(8) +#define MT_TXWI_RATE_STBC GENMASK(10, 9) +#define MT_TXWI_RATE_PHY_MODE GENMASK(15, 14) + +#define MT_TXWI_ACK_CTL_REQ BIT(0) +#define MT_TXWI_ACK_CTL_NSEQ BIT(1) +#define MT_TXWI_ACK_CTL_BA_WINDOW GENMASK(7, 2) + +#define MT_TXWI_LEN_BYTE_CNT GENMASK(11, 0) +#define MT_TXWI_LEN_PKTID GENMASK(15, 12) + +#define MT_TXWI_CTL_TX_POWER_ADJ GENMASK(3, 0) +#define MT_TXWI_CTL_CHAN_CHECK_PKT BIT(4) +#define MT_TXWI_CTL_PIFS_REV BIT(6) + +u32 mt76_mac_process_rx(struct mt7601u_dev *dev, struct sk_buff *skb, + u8 *data, void *rxi); +int mt76_mac_wcid_set_key(struct mt7601u_dev *dev, u8 idx, + struct ieee80211_key_conf *key); +void mt76_mac_wcid_set_rate(struct mt7601u_dev *dev, struct mt76_wcid *wcid, + const struct ieee80211_tx_rate *rate); + +int mt76_mac_shared_key_setup(struct mt7601u_dev *dev, u8 vif_idx, u8 key_idx, + struct ieee80211_key_conf *key); +u16 mt76_mac_tx_rate_val(struct mt7601u_dev *dev, + const struct ieee80211_tx_rate *rate, u8 *nss_val); +struct mt76_tx_status +mt7601u_mac_fetch_tx_status(struct mt7601u_dev *dev); +void mt76_send_tx_status(struct mt7601u_dev *dev, struct mt76_tx_status *stat); + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/main.c b/drivers/net/wireless/mediatek/mt7601u/main.c new file mode 100644 index 0000000000000..169384b48b27d --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/main.c @@ -0,0 +1,413 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "mac.h" +#include +#include + +static int mt7601u_start(struct ieee80211_hw *hw) +{ + struct mt7601u_dev *dev = hw->priv; + int ret; + + mutex_lock(&dev->mutex); + + ret = mt7601u_mac_start(dev); + if (ret) + goto out; + + ieee80211_queue_delayed_work(dev->hw, &dev->mac_work, + MT_CALIBRATE_INTERVAL); + ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, + MT_CALIBRATE_INTERVAL); +out: + mutex_unlock(&dev->mutex); + return ret; +} + +static void mt7601u_stop(struct ieee80211_hw *hw) +{ + struct mt7601u_dev *dev = hw->priv; + + mutex_lock(&dev->mutex); + + cancel_delayed_work_sync(&dev->cal_work); + cancel_delayed_work_sync(&dev->mac_work); + mt7601u_mac_stop(dev); + + mutex_unlock(&dev->mutex); +} + +static int mt7601u_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv; + unsigned int idx = 0; + unsigned int wcid = GROUP_WCID(idx); + + /* Note: for AP do the AP-STA things mt76 does: + * - beacon offsets + * - do mac address tricks + * - shift vif idx + */ + mvif->idx = idx; + + if (dev->wcid_mask[wcid / BITS_PER_LONG] & BIT(wcid % BITS_PER_LONG)) + return -ENOSPC; + dev->wcid_mask[wcid / BITS_PER_LONG] |= BIT(wcid % BITS_PER_LONG); + mvif->group_wcid.idx = wcid; + mvif->group_wcid.hw_key_idx = -1; + + return 0; +} + +static void mt7601u_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv; + unsigned int wcid = mvif->group_wcid.idx; + + dev->wcid_mask[wcid / BITS_PER_LONG] &= ~BIT(wcid % BITS_PER_LONG); +} + +static int mt7601u_config(struct ieee80211_hw *hw, u32 changed) +{ + struct mt7601u_dev *dev = hw->priv; + int ret = 0; + + mutex_lock(&dev->mutex); + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + ieee80211_stop_queues(hw); + ret = mt7601u_phy_set_channel(dev, &hw->conf.chandef); + ieee80211_wake_queues(hw); + } + + mutex_unlock(&dev->mutex); + + return ret; +} + +static void +mt76_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, + unsigned int *total_flags, u64 multicast) +{ + struct mt7601u_dev *dev = hw->priv; + u32 flags = 0; + +#define MT76_FILTER(_flag, _hw) do { \ + flags |= *total_flags & FIF_##_flag; \ + dev->rxfilter &= ~(_hw); \ + dev->rxfilter |= !(flags & FIF_##_flag) * (_hw); \ + } while (0) + + mutex_lock(&dev->mutex); + + dev->rxfilter &= ~MT_RX_FILTR_CFG_OTHER_BSS; + + MT76_FILTER(OTHER_BSS, MT_RX_FILTR_CFG_PROMISC); + MT76_FILTER(FCSFAIL, MT_RX_FILTR_CFG_CRC_ERR); + MT76_FILTER(PLCPFAIL, MT_RX_FILTR_CFG_PHY_ERR); + MT76_FILTER(CONTROL, MT_RX_FILTR_CFG_ACK | + MT_RX_FILTR_CFG_CTS | + MT_RX_FILTR_CFG_CFEND | + MT_RX_FILTR_CFG_CFACK | + MT_RX_FILTR_CFG_BA | + MT_RX_FILTR_CFG_CTRL_RSV); + MT76_FILTER(PSPOLL, MT_RX_FILTR_CFG_PSPOLL); + + *total_flags = flags; + mt76_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter); + + mutex_unlock(&dev->mutex); +} + +static void +mt7601u_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, u32 changed) +{ + struct mt7601u_dev *dev = hw->priv; + + mutex_lock(&dev->mutex); + + if (changed & BSS_CHANGED_ASSOC) + mt7601u_phy_con_cal_onoff(dev, info); + + if (changed & BSS_CHANGED_BSSID) { + mt7601u_addr_wr(dev, MT_MAC_BSSID_DW0, info->bssid); + + /* Note: this is a hack because beacon_int is not changed + * on leave nor is any more appropriate event generated. + * rt2x00 doesn't seem to be bothered though. + */ + if (is_zero_ether_addr(info->bssid)) + mt7601u_mac_config_tsf(dev, false, 0); + } + + if (changed & BSS_CHANGED_BASIC_RATES) { + mt7601u_wr(dev, MT_LEGACY_BASIC_RATE, info->basic_rates); + mt7601u_wr(dev, MT_HT_FBK_CFG0, 0x65432100); + mt7601u_wr(dev, MT_HT_FBK_CFG1, 0xedcba980); + mt7601u_wr(dev, MT_LG_FBK_CFG0, 0xedcba988); + mt7601u_wr(dev, MT_LG_FBK_CFG1, 0x00002100); + } + + if (changed & BSS_CHANGED_BEACON_INT) + mt7601u_mac_config_tsf(dev, true, info->beacon_int); + + if (changed & BSS_CHANGED_HT || changed & BSS_CHANGED_ERP_CTS_PROT) + mt7601u_mac_set_protection(dev, info->use_cts_prot, + info->ht_operation_mode); + + if (changed & BSS_CHANGED_ERP_PREAMBLE) + mt7601u_mac_set_short_preamble(dev, info->use_short_preamble); + + if (changed & BSS_CHANGED_ERP_SLOT) { + int slottime = info->use_short_slot ? 9 : 20; + + mt76_rmw_field(dev, MT_BKOFF_SLOT_CFG, + MT_BKOFF_SLOT_CFG_SLOTTIME, slottime); + } + + if (changed & BSS_CHANGED_ASSOC) + mt7601u_phy_recalibrate_after_assoc(dev); + + mutex_unlock(&dev->mutex); +} + +static int +mt76_wcid_alloc(struct mt7601u_dev *dev) +{ + int i, idx = 0; + + for (i = 0; i < ARRAY_SIZE(dev->wcid_mask); i++) { + idx = ffs(~dev->wcid_mask[i]); + if (!idx) + continue; + + idx--; + dev->wcid_mask[i] |= BIT(idx); + break; + } + + idx = i * BITS_PER_LONG + idx; + if (idx > 119) + return -1; + + return idx; +} + +static int +mt7601u_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv; + struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv; + int ret = 0; + int idx = 0; + + mutex_lock(&dev->mutex); + + idx = mt76_wcid_alloc(dev); + if (idx < 0) { + ret = -ENOSPC; + goto out; + } + + msta->wcid.idx = idx; + msta->wcid.hw_key_idx = -1; + mt7601u_mac_wcid_setup(dev, idx, mvif->idx, sta->addr); + mt76_clear(dev, MT_WCID_DROP(idx), MT_WCID_DROP_MASK(idx)); + rcu_assign_pointer(dev->wcid[idx], &msta->wcid); + mt7601u_mac_set_ampdu_factor(dev); + +out: + mutex_unlock(&dev->mutex); + + return ret; +} + +static int +mt7601u_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv; + int idx = msta->wcid.idx; + + mutex_lock(&dev->mutex); + rcu_assign_pointer(dev->wcid[idx], NULL); + mt76_set(dev, MT_WCID_DROP(idx), MT_WCID_DROP_MASK(idx)); + dev->wcid_mask[idx / BITS_PER_LONG] &= ~BIT(idx % BITS_PER_LONG); + mt7601u_mac_wcid_setup(dev, idx, 0, NULL); + mt7601u_mac_set_ampdu_factor(dev); + mutex_unlock(&dev->mutex); + + return 0; +} + +static void +mt7601u_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, struct ieee80211_sta *sta) +{ +} + +static void +mt7601u_sw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + const u8 *mac_addr) +{ + struct mt7601u_dev *dev = hw->priv; + + mt7601u_agc_save(dev); + set_bit(MT7601U_STATE_SCANNING, &dev->state); +} + +static void +mt7601u_sw_scan_complete(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct mt7601u_dev *dev = hw->priv; + + mt7601u_agc_restore(dev); + clear_bit(MT7601U_STATE_SCANNING, &dev->state); +} + +static int +mt7601u_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv; + struct mt76_sta *msta = sta ? (struct mt76_sta *) sta->drv_priv : NULL; + struct mt76_wcid *wcid = msta ? &msta->wcid : &mvif->group_wcid; + int idx = key->keyidx; + int ret; + + if (cmd == SET_KEY) { + key->hw_key_idx = wcid->idx; + wcid->hw_key_idx = idx; + } else { + if (idx == wcid->hw_key_idx) + wcid->hw_key_idx = -1; + + key = NULL; + } + + if (!msta) { + if (key || wcid->hw_key_idx == idx) { + ret = mt76_mac_wcid_set_key(dev, wcid->idx, key); + if (ret) + return ret; + } + + return mt76_mac_shared_key_setup(dev, mvif->idx, idx, key); + } + + return mt76_mac_wcid_set_key(dev, msta->wcid.idx, key); +} + +static int mt7601u_set_rts_threshold(struct ieee80211_hw *hw, u32 value) +{ + struct mt7601u_dev *dev = hw->priv; + + mt76_rmw_field(dev, MT_TX_RTS_CFG, MT_TX_RTS_CFG_THRESH, value); + + return 0; +} + +static int +mt76_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + enum ieee80211_ampdu_mlme_action action, + struct ieee80211_sta *sta, u16 tid, u16 *ssn, u8 buf_size) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv; + + WARN_ON(msta->wcid.idx > GROUP_WCID(0)); + + switch (action) { + case IEEE80211_AMPDU_RX_START: + mt76_set(dev, MT_WCID_ADDR(msta->wcid.idx) + 4, BIT(16 + tid)); + break; + case IEEE80211_AMPDU_RX_STOP: + mt76_clear(dev, MT_WCID_ADDR(msta->wcid.idx) + 4, + BIT(16 + tid)); + break; + case IEEE80211_AMPDU_TX_OPERATIONAL: + ieee80211_send_bar(vif, sta->addr, tid, msta->agg_ssn[tid]); + break; + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: + break; + case IEEE80211_AMPDU_TX_START: + msta->agg_ssn[tid] = *ssn << 4; + ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + case IEEE80211_AMPDU_TX_STOP_CONT: + ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); + break; + } + + return 0; +} + +static void +mt76_sta_rate_tbl_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta) +{ + struct mt7601u_dev *dev = hw->priv; + struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv; + struct ieee80211_sta_rates *rates; + struct ieee80211_tx_rate rate = {}; + + rcu_read_lock(); + rates = rcu_dereference(sta->rates); + + if (!rates) + goto out; + + rate.idx = rates->rate[0].idx; + rate.flags = rates->rate[0].flags; + mt76_mac_wcid_set_rate(dev, &msta->wcid, &rate); + +out: + rcu_read_unlock(); +} + +const struct ieee80211_ops mt7601u_ops = { + .tx = mt7601u_tx, + .start = mt7601u_start, + .stop = mt7601u_stop, + .add_interface = mt7601u_add_interface, + .remove_interface = mt7601u_remove_interface, + .config = mt7601u_config, + .configure_filter = mt76_configure_filter, + .bss_info_changed = mt7601u_bss_info_changed, + .sta_add = mt7601u_sta_add, + .sta_remove = mt7601u_sta_remove, + .sta_notify = mt7601u_sta_notify, + .set_key = mt7601u_set_key, + .conf_tx = mt7601u_conf_tx, + .sw_scan_start = mt7601u_sw_scan, + .sw_scan_complete = mt7601u_sw_scan_complete, + .ampdu_action = mt76_ampdu_action, + .sta_rate_tbl_update = mt76_sta_rate_tbl_update, + .set_rts_threshold = mt7601u_set_rts_threshold, +}; diff --git a/drivers/net/wireless/mediatek/mt7601u/mcu.c b/drivers/net/wireless/mediatek/mt7601u/mcu.c new file mode 100644 index 0000000000000..fbb1986eda3cb --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mcu.c @@ -0,0 +1,534 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#include "mt7601u.h" +#include "dma.h" +#include "mcu.h" +#include "usb.h" +#include "trace.h" + +#define MCU_FW_URB_MAX_PAYLOAD 0x3800 +#define MCU_FW_URB_SIZE (MCU_FW_URB_MAX_PAYLOAD + 12) +#define MCU_RESP_URB_SIZE 1024 + +static inline int firmware_running(struct mt7601u_dev *dev) +{ + return mt7601u_rr(dev, MT_MCU_COM_REG0) == 1; +} + +static inline void skb_put_le32(struct sk_buff *skb, u32 val) +{ + put_unaligned_le32(val, skb_put(skb, 4)); +} + +static inline void mt7601u_dma_skb_wrap_cmd(struct sk_buff *skb, + u8 seq, enum mcu_cmd cmd) +{ + WARN_ON(mt7601u_dma_skb_wrap(skb, CPU_TX_PORT, DMA_COMMAND, + MT76_SET(MT_TXD_CMD_INFO_SEQ, seq) | + MT76_SET(MT_TXD_CMD_INFO_TYPE, cmd))); +} + +static inline void trace_mt_mcu_msg_send_cs(struct mt7601u_dev *dev, + struct sk_buff *skb, bool need_resp) +{ + u32 i, csum = 0; + + for (i = 0; i < skb->len / 4; i++) + csum ^= get_unaligned_le32(skb->data + i * 4); + + trace_mt_mcu_msg_send(dev, skb, csum, need_resp); +} + +static struct sk_buff * +mt7601u_mcu_msg_alloc(struct mt7601u_dev *dev, const void *data, int len) +{ + struct sk_buff *skb; + + WARN_ON(len % 4); /* if length is not divisible by 4 we need to pad */ + + skb = alloc_skb(len + MT_DMA_HDR_LEN + 4, GFP_KERNEL); + skb_reserve(skb, MT_DMA_HDR_LEN); + memcpy(skb_put(skb, len), data, len); + + return skb; +} + +static int mt7601u_mcu_wait_resp(struct mt7601u_dev *dev, u8 seq) +{ + struct urb *urb = dev->mcu.resp.urb; + u32 rxfce; + int urb_status, ret, i = 5; + + while (i--) { + if (!wait_for_completion_timeout(&dev->mcu.resp_cmpl, + msecs_to_jiffies(300))) { + dev_warn(dev->dev, "Warning: %s retrying\n", __func__); + continue; + } + + /* Make copies of important data before reusing the urb */ + rxfce = get_unaligned_le32(dev->mcu.resp.buf); + urb_status = urb->status * mt7601u_urb_has_error(urb); + + ret = mt7601u_usb_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP, + &dev->mcu.resp, GFP_KERNEL, + mt7601u_complete_urb, + &dev->mcu.resp_cmpl); + if (ret) + return ret; + + if (urb_status) + dev_err(dev->dev, "Error: MCU resp urb failed:%d\n", + urb_status); + + if (MT76_GET(MT_RXD_CMD_INFO_CMD_SEQ, rxfce) == seq && + MT76_GET(MT_RXD_CMD_INFO_EVT_TYPE, rxfce) == CMD_DONE) + return 0; + + dev_err(dev->dev, "Error: MCU resp evt:%hhx seq:%hhx-%hhx!\n", + MT76_GET(MT_RXD_CMD_INFO_EVT_TYPE, rxfce), + seq, MT76_GET(MT_RXD_CMD_INFO_CMD_SEQ, rxfce)); + } + + dev_err(dev->dev, "Error: %s timed out\n", __func__); + return -ETIMEDOUT; +} + +static int +mt7601u_mcu_msg_send(struct mt7601u_dev *dev, struct sk_buff *skb, + enum mcu_cmd cmd, bool wait_resp) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + unsigned cmd_pipe = usb_sndbulkpipe(usb_dev, + dev->out_eps[MT_EP_OUT_INBAND_CMD]); + int sent, ret; + u8 seq = 0; + + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0; + + mutex_lock(&dev->mcu.mutex); + + if (wait_resp) + while (!seq) + seq = ++dev->mcu.msg_seq & 0xf; + + mt7601u_dma_skb_wrap_cmd(skb, seq, cmd); + + if (dev->mcu.resp_cmpl.done) + dev_err(dev->dev, "Error: MCU response pre-completed!\n"); + + trace_mt_mcu_msg_send_cs(dev, skb, wait_resp); + trace_mt_submit_urb_sync(dev, cmd_pipe, skb->len); + ret = usb_bulk_msg(usb_dev, cmd_pipe, skb->data, skb->len, &sent, 500); + if (ret) { + dev_err(dev->dev, "Error: send MCU cmd failed:%d\n", ret); + goto out; + } + if (sent != skb->len) + dev_err(dev->dev, "Error: %s sent != skb->len\n", __func__); + + if (wait_resp) + ret = mt7601u_mcu_wait_resp(dev, seq); +out: + mutex_unlock(&dev->mcu.mutex); + + consume_skb(skb); + + return ret; +} + +static int mt7601u_mcu_function_select(struct mt7601u_dev *dev, + enum mcu_function func, u32 val) +{ + struct sk_buff *skb; + struct { + __le32 id; + __le32 value; + } __packed __aligned(4) msg = { + .id = cpu_to_le32(func), + .value = cpu_to_le32(val), + }; + + skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg)); + return mt7601u_mcu_msg_send(dev, skb, CMD_FUN_SET_OP, func == 5); +} + +int mt7601u_mcu_tssi_read_kick(struct mt7601u_dev *dev, int use_hvga) +{ + int ret; + + if (!test_bit(MT7601U_STATE_MCU_RUNNING, &dev->state)) + return 0; + + ret = mt7601u_mcu_function_select(dev, ATOMIC_TSSI_SETTING, + use_hvga); + if (ret) { + dev_warn(dev->dev, "Warning: MCU TSSI read kick failed\n"); + return ret; + } + + dev->tssi_read_trig = true; + + return 0; +} + +int +mt7601u_mcu_calibrate(struct mt7601u_dev *dev, enum mcu_calibrate cal, u32 val) +{ + struct sk_buff *skb; + struct { + __le32 id; + __le32 value; + } __packed __aligned(4) msg = { + .id = cpu_to_le32(cal), + .value = cpu_to_le32(val), + }; + + skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg)); + return mt7601u_mcu_msg_send(dev, skb, CMD_CALIBRATION_OP, true); +} + +int mt7601u_write_reg_pairs(struct mt7601u_dev *dev, u32 base, + const struct mt76_reg_pair *data, int n) +{ + const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 8; + struct sk_buff *skb; + int cnt, i, ret; + + if (!n) + return 0; + + cnt = min(max_vals_per_cmd, n); + + skb = alloc_skb(cnt * 8 + MT_DMA_HDR_LEN + 4, GFP_KERNEL); + if (!skb) + return -ENOMEM; + skb_reserve(skb, MT_DMA_HDR_LEN); + + for (i = 0; i < cnt; i++) { + skb_put_le32(skb, base + data[i].reg); + skb_put_le32(skb, data[i].value); + } + + ret = mt7601u_mcu_msg_send(dev, skb, CMD_RANDOM_WRITE, cnt == n); + if (ret) + return ret; + + return mt7601u_write_reg_pairs(dev, base, data + cnt, n - cnt); +} + +int mt7601u_burst_write_regs(struct mt7601u_dev *dev, u32 offset, + const u32 *data, int n) +{ + const int max_regs_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1; + struct sk_buff *skb; + int cnt, i, ret; + + if (!n) + return 0; + + cnt = min(max_regs_per_cmd, n); + + skb = alloc_skb(cnt * 4 + MT_DMA_HDR_LEN + 4, GFP_KERNEL); + if (!skb) + return -ENOMEM; + skb_reserve(skb, MT_DMA_HDR_LEN); + + skb_put_le32(skb, MT_MCU_MEMMAP_WLAN + offset); + for (i = 0; i < cnt; i++) + skb_put_le32(skb, data[i]); + + ret = mt7601u_mcu_msg_send(dev, skb, CMD_BURST_WRITE, cnt == n); + if (ret) + return ret; + + return mt7601u_burst_write_regs(dev, offset + cnt * 4, + data + cnt, n - cnt); +} + +struct mt76_fw_header { + __le32 ilm_len; + __le32 dlm_len; + __le16 build_ver; + __le16 fw_ver; + u8 pad[4]; + char build_time[16]; +}; + +struct mt76_fw { + struct mt76_fw_header hdr; + u8 ivb[MT_MCU_IVB_SIZE]; + u8 ilm[]; +}; + +static int __mt7601u_dma_fw(struct mt7601u_dev *dev, + const struct mt7601u_dma_buf *dma_buf, + const void *data, u32 len, u32 dst_addr) +{ + DECLARE_COMPLETION_ONSTACK(cmpl); + struct mt7601u_dma_buf buf = *dma_buf; /* we need to fake length */ + __le32 reg; + u32 val; + int ret; + + reg = cpu_to_le32(MT76_SET(MT_TXD_INFO_TYPE, DMA_PACKET) | + MT76_SET(MT_TXD_INFO_D_PORT, CPU_TX_PORT) | + MT76_SET(MT_TXD_INFO_LEN, len)); + memcpy(buf.buf, ®, sizeof(reg)); + memcpy(buf.buf + sizeof(reg), data, len); + memset(buf.buf + sizeof(reg) + len, 0, 8); + + ret = mt7601u_vendor_single_wr(dev, MT_VEND_WRITE_FCE, + MT_FCE_DMA_ADDR, dst_addr); + if (ret) + return ret; + len = roundup(len, 4); + ret = mt7601u_vendor_single_wr(dev, MT_VEND_WRITE_FCE, + MT_FCE_DMA_LEN, len << 16); + if (ret) + return ret; + + buf.len = MT_DMA_HDR_LEN + len + 4; + ret = mt7601u_usb_submit_buf(dev, USB_DIR_OUT, MT_EP_OUT_INBAND_CMD, + &buf, GFP_KERNEL, + mt7601u_complete_urb, &cmpl); + if (ret) + return ret; + + if (!wait_for_completion_timeout(&cmpl, msecs_to_jiffies(1000))) { + dev_err(dev->dev, "Error: firmware upload timed out\n"); + usb_kill_urb(buf.urb); + return -ETIMEDOUT; + } + if (mt7601u_urb_has_error(buf.urb)) { + dev_err(dev->dev, "Error: firmware upload urb failed:%d\n", + buf.urb->status); + return buf.urb->status; + } + + val = mt7601u_rr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX); + val++; + mt7601u_wr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX, val); + + return 0; +} + +static int +mt7601u_dma_fw(struct mt7601u_dev *dev, struct mt7601u_dma_buf *dma_buf, + const void *data, int len, u32 dst_addr) +{ + int n, ret; + + if (len == 0) + return 0; + + n = min(MCU_FW_URB_MAX_PAYLOAD, len); + ret = __mt7601u_dma_fw(dev, dma_buf, data, n, dst_addr); + if (ret) + return ret; + + if (!mt76_poll_msec(dev, MT_MCU_COM_REG1, BIT(31), BIT(31), 500)) + return -ETIMEDOUT; + + return mt7601u_dma_fw(dev, dma_buf, data + n, len - n, dst_addr + n); +} + +static int +mt7601u_upload_firmware(struct mt7601u_dev *dev, const struct mt76_fw *fw) +{ + struct mt7601u_dma_buf dma_buf; + void *ivb; + u32 ilm_len, dlm_len; + int i, ret; + + ivb = kmemdup(fw->ivb, sizeof(fw->ivb), GFP_KERNEL); + if (!ivb || mt7601u_usb_alloc_buf(dev, MCU_FW_URB_SIZE, &dma_buf)) { + ret = -ENOMEM; + goto error; + } + + ilm_len = le32_to_cpu(fw->hdr.ilm_len) - sizeof(fw->ivb); + dev_dbg(dev->dev, "loading FW - ILM %u + IVB %zu\n", + ilm_len, sizeof(fw->ivb)); + ret = mt7601u_dma_fw(dev, &dma_buf, fw->ilm, ilm_len, sizeof(fw->ivb)); + if (ret) + goto error; + + dlm_len = le32_to_cpu(fw->hdr.dlm_len); + dev_dbg(dev->dev, "loading FW - DLM %u\n", dlm_len); + ret = mt7601u_dma_fw(dev, &dma_buf, fw->ilm + ilm_len, + dlm_len, MT_MCU_DLM_OFFSET); + if (ret) + goto error; + + ret = mt7601u_vendor_request(dev, MT_VEND_DEV_MODE, USB_DIR_OUT, + 0x12, 0, ivb, sizeof(fw->ivb)); + if (ret < 0) + goto error; + ret = 0; + + for (i = 100; i && !firmware_running(dev); i--) + msleep(10); + if (!i) { + ret = -ETIMEDOUT; + goto error; + } + + dev_dbg(dev->dev, "Firmware running!\n"); +error: + kfree(ivb); + mt7601u_usb_free_buf(dev, &dma_buf); + + return ret; +} + +static int mt7601u_load_firmware(struct mt7601u_dev *dev) +{ + const struct firmware *fw; + const struct mt76_fw_header *hdr; + int len, ret; + u32 val; + + mt7601u_wr(dev, MT_USB_DMA_CFG, (MT_USB_DMA_CFG_RX_BULK_EN | + MT_USB_DMA_CFG_TX_BULK_EN)); + + if (firmware_running(dev)) + return 0; + + ret = request_firmware(&fw, MT7601U_FIRMWARE, dev->dev); + if (ret) + return ret; + + if (!fw || !fw->data || fw->size < sizeof(*hdr)) + goto err_inv_fw; + + hdr = (const struct mt76_fw_header *) fw->data; + + if (le32_to_cpu(hdr->ilm_len) <= MT_MCU_IVB_SIZE) + goto err_inv_fw; + + len = sizeof(*hdr); + len += le32_to_cpu(hdr->ilm_len); + len += le32_to_cpu(hdr->dlm_len); + + if (fw->size != len) + goto err_inv_fw; + + val = le16_to_cpu(hdr->fw_ver); + dev_info(dev->dev, + "Firmware Version: %d.%d.%02d Build: %x Build time: %.16s\n", + (val >> 12) & 0xf, (val >> 8) & 0xf, val & 0xf, + le16_to_cpu(hdr->build_ver), hdr->build_time); + + len = le32_to_cpu(hdr->ilm_len); + + mt7601u_wr(dev, 0x94c, 0); + mt7601u_wr(dev, MT_FCE_PSE_CTRL, 0); + + mt7601u_vendor_reset(dev); + msleep(5); + + mt7601u_wr(dev, 0xa44, 0); + mt7601u_wr(dev, 0x230, 0x84210); + mt7601u_wr(dev, 0x400, 0x80c00); + mt7601u_wr(dev, 0x800, 1); + + mt7601u_rmw(dev, MT_PBF_CFG, 0, (MT_PBF_CFG_TX0Q_EN | + MT_PBF_CFG_TX1Q_EN | + MT_PBF_CFG_TX2Q_EN | + MT_PBF_CFG_TX3Q_EN)); + + mt7601u_wr(dev, MT_FCE_PSE_CTRL, 1); + + mt7601u_wr(dev, MT_USB_DMA_CFG, (MT_USB_DMA_CFG_RX_BULK_EN | + MT_USB_DMA_CFG_TX_BULK_EN)); + val = mt76_set(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_CLR); + val &= ~MT_USB_DMA_CFG_TX_CLR; + mt7601u_wr(dev, MT_USB_DMA_CFG, val); + + /* FCE tx_fs_base_ptr */ + mt7601u_wr(dev, MT_TX_CPU_FROM_FCE_BASE_PTR, 0x400230); + /* FCE tx_fs_max_cnt */ + mt7601u_wr(dev, MT_TX_CPU_FROM_FCE_MAX_COUNT, 1); + /* FCE pdma enable */ + mt7601u_wr(dev, MT_FCE_PDMA_GLOBAL_CONF, 0x44); + /* FCE skip_fs_en */ + mt7601u_wr(dev, MT_FCE_SKIP_FS, 3); + + ret = mt7601u_upload_firmware(dev, (const struct mt76_fw *)fw->data); + + release_firmware(fw); + + return ret; + +err_inv_fw: + dev_err(dev->dev, "Invalid firmware image\n"); + release_firmware(fw); + return -ENOENT; +} + +int mt7601u_mcu_init(struct mt7601u_dev *dev) +{ + int ret; + + mutex_init(&dev->mcu.mutex); + + ret = mt7601u_load_firmware(dev); + if (ret) + return ret; + + set_bit(MT7601U_STATE_MCU_RUNNING, &dev->state); + + return 0; +} + +int mt7601u_mcu_cmd_init(struct mt7601u_dev *dev) +{ + int ret; + + ret = mt7601u_mcu_function_select(dev, Q_SELECT, 1); + if (ret) + return ret; + + init_completion(&dev->mcu.resp_cmpl); + if (mt7601u_usb_alloc_buf(dev, MCU_RESP_URB_SIZE, &dev->mcu.resp)) { + mt7601u_usb_free_buf(dev, &dev->mcu.resp); + return -ENOMEM; + } + + ret = mt7601u_usb_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP, + &dev->mcu.resp, GFP_KERNEL, + mt7601u_complete_urb, &dev->mcu.resp_cmpl); + if (ret) { + mt7601u_usb_free_buf(dev, &dev->mcu.resp); + return ret; + } + + return 0; +} + +void mt7601u_mcu_cmd_deinit(struct mt7601u_dev *dev) +{ + usb_kill_urb(dev->mcu.resp.urb); + mt7601u_usb_free_buf(dev, &dev->mcu.resp); +} diff --git a/drivers/net/wireless/mediatek/mt7601u/mcu.h b/drivers/net/wireless/mediatek/mt7601u/mcu.h new file mode 100644 index 0000000000000..4a66d1092a186 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mcu.h @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_MCU_H +#define __MT7601U_MCU_H + +struct mt7601u_dev; + +/* Register definitions */ +#define MT_MCU_RESET_CTL 0x070C +#define MT_MCU_INT_LEVEL 0x0718 +#define MT_MCU_COM_REG0 0x0730 +#define MT_MCU_COM_REG1 0x0734 +#define MT_MCU_COM_REG2 0x0738 +#define MT_MCU_COM_REG3 0x073C + +#define MT_MCU_IVB_SIZE 0x40 +#define MT_MCU_DLM_OFFSET 0x80000 + +#define MT_MCU_MEMMAP_WLAN 0x00410000 +#define MT_MCU_MEMMAP_BBP 0x40000000 +#define MT_MCU_MEMMAP_RF 0x80000000 + +#define INBAND_PACKET_MAX_LEN 192 + +enum mcu_cmd { + CMD_FUN_SET_OP = 1, + CMD_LOAD_CR = 2, + CMD_INIT_GAIN_OP = 3, + CMD_DYNC_VGA_OP = 6, + CMD_TDLS_CH_SW = 7, + CMD_BURST_WRITE = 8, + CMD_READ_MODIFY_WRITE = 9, + CMD_RANDOM_READ = 10, + CMD_BURST_READ = 11, + CMD_RANDOM_WRITE = 12, + CMD_LED_MODE_OP = 16, + CMD_POWER_SAVING_OP = 20, + CMD_WOW_CONFIG = 21, + CMD_WOW_QUERY = 22, + CMD_WOW_FEATURE = 24, + CMD_CARRIER_DETECT_OP = 28, + CMD_RADOR_DETECT_OP = 29, + CMD_SWITCH_CHANNEL_OP = 30, + CMD_CALIBRATION_OP = 31, + CMD_BEACON_OP = 32, + CMD_ANTENNA_OP = 33, +}; + +enum mcu_function { + Q_SELECT = 1, + ATOMIC_TSSI_SETTING = 5, +}; + +enum mcu_power_mode { + RADIO_OFF = 0x30, + RADIO_ON = 0x31, + RADIO_OFF_AUTO_WAKEUP = 0x32, + RADIO_OFF_ADVANCE = 0x33, + RADIO_ON_ADVANCE = 0x34, +}; + +enum mcu_calibrate { + MCU_CAL_R = 1, + MCU_CAL_DCOC, + MCU_CAL_LC, + MCU_CAL_LOFT, + MCU_CAL_TXIQ, + MCU_CAL_BW, + MCU_CAL_DPD, + MCU_CAL_RXIQ, + MCU_CAL_TXDCOC, +}; + +int mt7601u_mcu_init(struct mt7601u_dev *dev); +int mt7601u_mcu_cmd_init(struct mt7601u_dev *dev); +void mt7601u_mcu_cmd_deinit(struct mt7601u_dev *dev); + +int +mt7601u_mcu_calibrate(struct mt7601u_dev *dev, enum mcu_calibrate cal, u32 val); +int mt7601u_mcu_tssi_read_kick(struct mt7601u_dev *dev, int use_hvga); + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/mt7601u.h b/drivers/net/wireless/mediatek/mt7601u/mt7601u.h new file mode 100644 index 0000000000000..9102be6b95cb7 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/mt7601u.h @@ -0,0 +1,390 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef MT7601U_H +#define MT7601U_H + +#include +#include +#include +#include +#include +#include +#include + +#include "regs.h" +#include "util.h" + +#define MT_CALIBRATE_INTERVAL (4 * HZ) + +#define MT_FREQ_CAL_INIT_DELAY (30 * HZ) +#define MT_FREQ_CAL_CHECK_INTERVAL (10 * HZ) +#define MT_FREQ_CAL_ADJ_INTERVAL (HZ / 2) + +#define MT_BBP_REG_VERSION 0x00 + +#define MT_USB_AGGR_SIZE_LIMIT 28 /* * 1024B */ +#define MT_USB_AGGR_TIMEOUT 0x80 /* * 33ns */ +#define MT_RX_ORDER 3 +#define MT_RX_URB_SIZE (PAGE_SIZE << MT_RX_ORDER) + +struct mt7601u_dma_buf { + struct urb *urb; + void *buf; + dma_addr_t dma; + size_t len; +}; + +struct mt7601u_mcu { + struct mutex mutex; + + u8 msg_seq; + + struct mt7601u_dma_buf resp; + struct completion resp_cmpl; +}; + +struct mt7601u_freq_cal { + struct delayed_work work; + u8 freq; + bool enabled; + bool adjusting; +}; + +struct mac_stats { + u64 rx_stat[6]; + u64 tx_stat[6]; + u64 aggr_stat[2]; + u64 aggr_n[32]; + u64 zero_len_del[2]; +}; + +#define N_RX_ENTRIES 16 +struct mt7601u_rx_queue { + struct mt7601u_dev *dev; + + struct mt7601u_dma_buf_rx { + struct urb *urb; + struct page *p; + } e[N_RX_ENTRIES]; + + unsigned int start; + unsigned int end; + unsigned int entries; + unsigned int pending; +}; + +#define N_TX_ENTRIES 64 + +struct mt7601u_tx_queue { + struct mt7601u_dev *dev; + + struct mt7601u_dma_buf_tx { + struct urb *urb; + struct sk_buff *skb; + } e[N_TX_ENTRIES]; + + unsigned int start; + unsigned int end; + unsigned int entries; + unsigned int used; + unsigned int fifo_seq; +}; + +/* WCID allocation: + * 0: mcast wcid + * 1: bssid wcid + * 1...: STAs + * ...7e: group wcids + * 7f: reserved + */ +#define N_WCIDS 128 +#define GROUP_WCID(idx) (N_WCIDS - 2 - idx) + +struct mt7601u_eeprom_params; + +#define MT_EE_TEMPERATURE_SLOPE 39 +#define MT_FREQ_OFFSET_INVALID -128 + +enum mt_temp_mode { + MT_TEMP_MODE_NORMAL, + MT_TEMP_MODE_HIGH, + MT_TEMP_MODE_LOW, +}; + +enum mt_bw { + MT_BW_20, + MT_BW_40, +}; + +enum { + MT7601U_STATE_INITIALIZED, + MT7601U_STATE_REMOVED, + MT7601U_STATE_WLAN_RUNNING, + MT7601U_STATE_MCU_RUNNING, + MT7601U_STATE_SCANNING, + MT7601U_STATE_READING_STATS, + MT7601U_STATE_MORE_STATS, +}; + +/** + * struct mt7601u_dev - adapter structure + * @lock: protects @wcid->tx_rate. + * @tx_lock: protects @tx_q and changes of MT7601U_STATE_*_STATS + flags in @state. + * @rx_lock: protects @rx_q. + * @con_mon_lock: protects @ap_bssid, @bcn_*, @avg_rssi. + * @mutex: ensures exclusive access from mac80211 callbacks. + * @vendor_req_mutex: ensures atomicity of vendor requests. + * @reg_atomic_mutex: ensures atomicity of indirect register accesses + * (accesses to RF and BBP). + * @hw_atomic_mutex: ensures exclusive access to HW during critical + * operations (power management, channel switch). + */ +struct mt7601u_dev { + struct ieee80211_hw *hw; + struct device *dev; + + unsigned long state; + + struct mutex mutex; + + unsigned long wcid_mask[N_WCIDS / BITS_PER_LONG]; + + struct cfg80211_chan_def chandef; + struct ieee80211_supported_band *sband_2g; + + struct mt7601u_mcu mcu; + + struct delayed_work cal_work; + struct delayed_work mac_work; + + struct workqueue_struct *stat_wq; + struct delayed_work stat_work; + + struct mt76_wcid *mon_wcid; + struct mt76_wcid __rcu *wcid[N_WCIDS]; + + spinlock_t lock; + + const u16 *beacon_offsets; + + u8 macaddr[ETH_ALEN]; + struct mt7601u_eeprom_params *ee; + + struct mutex vendor_req_mutex; + struct mutex reg_atomic_mutex; + struct mutex hw_atomic_mutex; + + u32 rxfilter; + u32 debugfs_reg; + + u8 out_eps[8]; + u8 in_eps[8]; + u16 out_max_packet; + u16 in_max_packet; + + /* TX */ + spinlock_t tx_lock; + struct mt7601u_tx_queue *tx_q; + + atomic_t avg_ampdu_len; + + /* RX */ + spinlock_t rx_lock; + struct tasklet_struct rx_tasklet; + struct mt7601u_rx_queue rx_q; + + /* Connection monitoring things */ + spinlock_t con_mon_lock; + u8 ap_bssid[ETH_ALEN]; + + s8 bcn_freq_off; + u8 bcn_phy_mode; + + int avg_rssi; /* starts at 0 and converges */ + + u8 agc_save; + + struct mt7601u_freq_cal freq_cal; + + bool tssi_read_trig; + + s8 tssi_init; + s8 tssi_init_hvga; + s16 tssi_init_hvga_offset_db; + + int prev_pwr_diff; + + enum mt_temp_mode temp_mode; + int curr_temp; + int dpd_temp; + s8 raw_temp; + bool pll_lock_protect; + + u8 bw; + bool chan_ext_below; + + /* PA mode */ + u32 rf_pa_mode[2]; + + struct mac_stats stats; +}; + +struct mt7601u_tssi_params { + char tssi0; + int trgt_power; +}; + +struct mt76_wcid { + u8 idx; + u8 hw_key_idx; + + u16 tx_rate; + bool tx_rate_set; + u8 tx_rate_nss; +}; + +struct mt76_vif { + u8 idx; + + struct mt76_wcid group_wcid; +}; + +struct mt76_sta { + struct mt76_wcid wcid; + u16 agg_ssn[IEEE80211_NUM_TIDS]; +}; + +struct mt76_reg_pair { + u32 reg; + u32 value; +}; + +struct mt7601u_rxwi; + +extern const struct ieee80211_ops mt7601u_ops; + +void mt7601u_init_debugfs(struct mt7601u_dev *dev); + +u32 mt7601u_rr(struct mt7601u_dev *dev, u32 offset); +void mt7601u_wr(struct mt7601u_dev *dev, u32 offset, u32 val); +u32 mt7601u_rmw(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val); +u32 mt7601u_rmc(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val); +void mt7601u_wr_copy(struct mt7601u_dev *dev, u32 offset, + const void *data, int len); + +int mt7601u_wait_asic_ready(struct mt7601u_dev *dev); +bool mt76_poll(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val, + int timeout); +bool mt76_poll_msec(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val, + int timeout); + +/* Compatibility with mt76 */ +#define mt76_rmw_field(_dev, _reg, _field, _val) \ + mt76_rmw(_dev, _reg, _field, MT76_SET(_field, _val)) + +static inline u32 mt76_rr(struct mt7601u_dev *dev, u32 offset) +{ + return mt7601u_rr(dev, offset); +} + +static inline void mt76_wr(struct mt7601u_dev *dev, u32 offset, u32 val) +{ + return mt7601u_wr(dev, offset, val); +} + +static inline u32 +mt76_rmw(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val) +{ + return mt7601u_rmw(dev, offset, mask, val); +} + +static inline u32 mt76_set(struct mt7601u_dev *dev, u32 offset, u32 val) +{ + return mt76_rmw(dev, offset, 0, val); +} + +static inline u32 mt76_clear(struct mt7601u_dev *dev, u32 offset, u32 val) +{ + return mt76_rmw(dev, offset, val, 0); +} + +int mt7601u_write_reg_pairs(struct mt7601u_dev *dev, u32 base, + const struct mt76_reg_pair *data, int len); +int mt7601u_burst_write_regs(struct mt7601u_dev *dev, u32 offset, + const u32 *data, int n); +void mt7601u_addr_wr(struct mt7601u_dev *dev, const u32 offset, const u8 *addr); + +/* Init */ +struct mt7601u_dev *mt7601u_alloc_device(struct device *dev); +int mt7601u_init_hardware(struct mt7601u_dev *dev); +int mt7601u_register_device(struct mt7601u_dev *dev); +void mt7601u_cleanup(struct mt7601u_dev *dev); + +int mt7601u_mac_start(struct mt7601u_dev *dev); +void mt7601u_mac_stop(struct mt7601u_dev *dev); + +/* PHY */ +int mt7601u_phy_init(struct mt7601u_dev *dev); +int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev); +void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path); +void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 path); +int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw); +void mt7601u_agc_save(struct mt7601u_dev *dev); +void mt7601u_agc_restore(struct mt7601u_dev *dev); +int mt7601u_phy_set_channel(struct mt7601u_dev *dev, + struct cfg80211_chan_def *chandef); +void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev); +int mt7601u_phy_get_rssi(struct mt7601u_dev *dev, + struct mt7601u_rxwi *rxwi, u16 rate); +void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev, + struct ieee80211_bss_conf *info); + +/* MAC */ +void mt7601u_mac_work(struct work_struct *work); +void mt7601u_mac_set_protection(struct mt7601u_dev *dev, bool legacy_prot, + int ht_mode); +void mt7601u_mac_set_short_preamble(struct mt7601u_dev *dev, bool short_preamb); +void mt7601u_mac_config_tsf(struct mt7601u_dev *dev, bool enable, int interval); +void +mt7601u_mac_wcid_setup(struct mt7601u_dev *dev, u8 idx, u8 vif_idx, u8 *mac); +void mt7601u_mac_set_ampdu_factor(struct mt7601u_dev *dev); + +/* TX */ +void mt7601u_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, + struct sk_buff *skb); +int mt7601u_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + u16 queue, const struct ieee80211_tx_queue_params *params); +void mt7601u_tx_status(struct mt7601u_dev *dev, struct sk_buff *skb); +void mt7601u_tx_stat(struct work_struct *work); + +/* util */ +void mt76_remove_hdr_pad(struct sk_buff *skb); +int mt76_insert_hdr_pad(struct sk_buff *skb); + +u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below); + +static inline u32 mt7601u_mac_set_ctrlch(struct mt7601u_dev *dev, bool below) +{ + return mt7601u_rmc(dev, MT_TX_BAND_CFG, 1, below); +} + +int mt7601u_dma_init(struct mt7601u_dev *dev); +void mt7601u_dma_cleanup(struct mt7601u_dev *dev); + +int mt7601u_dma_enqueue_tx(struct mt7601u_dev *dev, struct sk_buff *skb, + struct mt76_wcid *wcid, int hw_q); + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c new file mode 100644 index 0000000000000..1908af6add87a --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/phy.c @@ -0,0 +1,1251 @@ +/* + * (c) Copyright 2002-2010, Ralink Technology, Inc. + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "mcu.h" +#include "eeprom.h" +#include "trace.h" +#include "initvals_phy.h" + +#include + +static void mt7601u_agc_reset(struct mt7601u_dev *dev); + +static int +mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value) +{ + int ret = 0; + + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || + WARN_ON(offset > 63)) + return -EINVAL; + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) { + ret = -ETIMEDOUT; + goto out; + } + + mt7601u_wr(dev, MT_RF_CSR_CFG, MT76_SET(MT_RF_CSR_CFG_DATA, value) | + MT76_SET(MT_RF_CSR_CFG_REG_BANK, bank) | + MT76_SET(MT_RF_CSR_CFG_REG_ID, offset) | + MT_RF_CSR_CFG_WR | + MT_RF_CSR_CFG_KICK); + trace_rf_write(dev, bank, offset, value); +out: + mutex_unlock(&dev->reg_atomic_mutex); + + if (ret < 0) + dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n", + bank, offset, ret); + + return ret; +} + +static int +mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset) +{ + int ret = -ETIMEDOUT; + u32 val; + + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || + WARN_ON(offset > 63)) + return -EINVAL; + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0xff; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) + goto out; + + mt7601u_wr(dev, MT_RF_CSR_CFG, MT76_SET(MT_RF_CSR_CFG_REG_BANK, bank) | + MT76_SET(MT_RF_CSR_CFG_REG_ID, offset) | + MT_RF_CSR_CFG_KICK); + + if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) + goto out; + + val = mt7601u_rr(dev, MT_RF_CSR_CFG); + if (MT76_GET(MT_RF_CSR_CFG_REG_ID, val) == offset && + MT76_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) { + ret = MT76_GET(MT_RF_CSR_CFG_DATA, val); + trace_rf_read(dev, bank, offset, ret); + } +out: + mutex_unlock(&dev->reg_atomic_mutex); + + if (ret < 0) + dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n", + bank, offset, ret); + + return ret; +} + +static int +mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val) +{ + int ret; + + ret = mt7601u_rf_rr(dev, bank, offset); + if (ret < 0) + return ret; + val |= ret & ~mask; + ret = mt7601u_rf_wr(dev, bank, offset, val); + if (ret) + return ret; + + return val; +} + +static int +mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val) +{ + return mt7601u_rf_rmw(dev, bank, offset, 0, val); +} + +static int +mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask) +{ + return mt7601u_rf_rmw(dev, bank, offset, mask, 0); +} + +static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val) +{ + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) || + test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) { + dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset); + goto out; + } + + mt7601u_wr(dev, MT_BBP_CSR_CFG, + MT76_SET(MT_BBP_CSR_CFG_VAL, val) | + MT76_SET(MT_BBP_CSR_CFG_REG_NUM, offset) | + MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY); + trace_bbp_write(dev, offset, val); +out: + mutex_unlock(&dev->reg_atomic_mutex); +} + +static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset) +{ + u32 val; + int ret = -ETIMEDOUT; + + if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state))) + return -EINVAL; + if (test_bit(MT7601U_STATE_REMOVED, &dev->state)) + return 0xff; + + mutex_lock(&dev->reg_atomic_mutex); + + if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) + goto out; + + mt7601u_wr(dev, MT_BBP_CSR_CFG, + MT76_SET(MT_BBP_CSR_CFG_REG_NUM, offset) | + MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY | + MT_BBP_CSR_CFG_READ); + + if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) + goto out; + + val = mt7601u_rr(dev, MT_BBP_CSR_CFG); + if (MT76_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) { + ret = MT76_GET(MT_BBP_CSR_CFG_VAL, val); + trace_bbp_read(dev, offset, ret); + } +out: + mutex_unlock(&dev->reg_atomic_mutex); + + if (ret < 0) + dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n", + offset, ret); + + return ret; +} + +static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) +{ + int ret; + + ret = mt7601u_bbp_rr(dev, offset); + if (ret < 0) + return ret; + val |= ret & ~mask; + mt7601u_bbp_wr(dev, offset, val); + + return val; +} + +static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val) +{ + int ret; + + ret = mt7601u_bbp_rr(dev, offset); + if (ret < 0) + return ret; + val |= ret & ~mask; + if (ret != val) + mt7601u_bbp_wr(dev, offset, val); + + return val; +} + +int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev) +{ + int i = 20; + u8 val; + + do { + val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION); + if (val && ~val) + break; + } while (--i); + + if (!i) { + dev_err(dev->dev, "Error: BBP is not ready\n"); + return -EIO; + } + + return 0; +} + +u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below) +{ + return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0); +} + +int mt7601u_phy_get_rssi(struct mt7601u_dev *dev, + struct mt7601u_rxwi *rxwi, u16 rate) +{ + static const s8 lna[2][2][3] = { + /* main LNA */ { + /* bw20 */ { -2, 15, 33 }, + /* bw40 */ { 0, 16, 34 } + }, + /* aux LNA */ { + /* bw20 */ { -2, 15, 33 }, + /* bw40 */ { -2, 16, 34 } + } + }; + int bw = MT76_GET(MT_RXWI_RATE_BW, rate); + int aux_lna = MT76_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant); + int lna_id = MT76_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain); + int val; + + if (lna_id) /* LNA id can be 0, 2, 3. */ + lna_id--; + + val = 8; + val -= lna[aux_lna][bw][lna_id]; + val -= MT76_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain); + val -= dev->ee->lna_gain; + val -= dev->ee->rssi_offset[0]; + + return val; +} + +static void mt7601u_vco_cal(struct mt7601u_dev *dev) +{ + mt7601u_rf_wr(dev, 0, 4, 0x0a); + mt7601u_rf_wr(dev, 0, 5, 0x20); + mt7601u_rf_set(dev, 0, 4, BIT(7)); + msleep(2); +} + +static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal) +{ + u32 filter = 0; + int ret; + + if (!cal) + filter |= 0x10000; + if (dev->bw != MT_BW_20) + filter |= 0x00100; + + /* TX */ + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1); + if (ret) + return ret; + /* RX */ + return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter); +} + +static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev) +{ + const struct reg_table *t; + + if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW)) + return -EINVAL; + + t = &bbp_mode_table[dev->temp_mode][dev->bw]; + + return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n); +} + +static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name) +{ + const struct reg_table *t; + int ret; + + if (dev->temp_mode == mode) + return 0; + + dev->temp_mode = mode; + trace_temp_mode(dev, mode); + + t = bbp_mode_table[dev->temp_mode]; + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + t[2].regs, t[2].n); + if (ret) + return ret; + + return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + t[dev->bw].regs, t[dev->bw].n); +} + +static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan) +{ + struct mt7601u_rate_power *t = &dev->ee->power_rate_table; + + if (hw_chan != 14 || dev->bw != MT_BW_20) { + mt7601u_bbp_rmw(dev, 4, 0x20, 0); + mt7601u_bbp_wr(dev, 178, 0xff); + + t->cck[0].bw20 = dev->ee->real_cck_bw20[0]; + t->cck[1].bw20 = dev->ee->real_cck_bw20[1]; + } else { /* Apply CH14 OBW fixup */ + mt7601u_bbp_wr(dev, 4, 0x60); + mt7601u_bbp_wr(dev, 178, 0); + + /* Note: vendor code is buggy here for negative values */ + t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2; + t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2; + } +} + +static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev, + struct cfg80211_chan_def *chandef) +{ +#define FREQ_PLAN_REGS 4 + static const u8 freq_plan[14][FREQ_PLAN_REGS] = { + { 0x99, 0x99, 0x09, 0x50 }, + { 0x46, 0x44, 0x0a, 0x50 }, + { 0xec, 0xee, 0x0a, 0x50 }, + { 0x99, 0x99, 0x0b, 0x50 }, + { 0x46, 0x44, 0x08, 0x51 }, + { 0xec, 0xee, 0x08, 0x51 }, + { 0x99, 0x99, 0x09, 0x51 }, + { 0x46, 0x44, 0x0a, 0x51 }, + { 0xec, 0xee, 0x0a, 0x51 }, + { 0x99, 0x99, 0x0b, 0x51 }, + { 0x46, 0x44, 0x08, 0x52 }, + { 0xec, 0xee, 0x08, 0x52 }, + { 0x99, 0x99, 0x09, 0x52 }, + { 0x33, 0x33, 0x0b, 0x52 }, + }; + struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = { + { 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 }, + }; + struct mt76_reg_pair bbp_settings[3] = { + { 62, 0x37 - dev->ee->lna_gain }, + { 63, 0x37 - dev->ee->lna_gain }, + { 64, 0x37 - dev->ee->lna_gain }, + }; + + struct ieee80211_channel *chan = chandef->chan; + enum nl80211_channel_type chan_type = + cfg80211_get_chandef_type(chandef); + struct mt7601u_rate_power *t = &dev->ee->power_rate_table; + int chan_idx; + bool chan_ext_below; + u8 bw; + int i, ret; + + bw = MT_BW_20; + chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS); + chan_idx = chan->hw_value - 1; + + if (chandef->width == NL80211_CHAN_WIDTH_40) { + bw = MT_BW_40; + + if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS) + chan_idx -= 2; + else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS) + chan_idx += 2; + else + dev_err(dev->dev, "Error: invalid 40MHz channel!!\n"); + } + + if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) { + dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n", + bw, chan_ext_below); + + mt7601u_bbp_set_bw(dev, bw); + + mt7601u_bbp_set_ctrlch(dev, chan_ext_below); + mt7601u_mac_set_ctrlch(dev, chan_ext_below); + dev->chan_ext_below = chan_ext_below; + } + + for (i = 0; i < FREQ_PLAN_REGS; i++) + channel_freq_plan[i].value = freq_plan[chan_idx][i]; + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF, + channel_freq_plan, FREQ_PLAN_REGS); + if (ret) + return ret; + + mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f, + dev->ee->chan_pwr[chan_idx] & 0x3f); + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + bbp_settings, ARRAY_SIZE(bbp_settings)); + if (ret) + return ret; + + mt7601u_vco_cal(dev); + mt7601u_bbp_set_bw(dev, bw); + ret = mt7601u_set_bw_filter(dev, false); + if (ret) + return ret; + + mt7601u_apply_ch14_fixup(dev, chan->hw_value); + mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 | + int_to_s6(t->ofdm[0].bw20) << 16 | + int_to_s6(t->cck[1].bw20) << 8 | + int_to_s6(t->cck[0].bw20)); + + if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) + mt7601u_agc_reset(dev); + + dev->chandef = *chandef; + + return 0; +} + +int mt7601u_phy_set_channel(struct mt7601u_dev *dev, + struct cfg80211_chan_def *chandef) +{ + int ret; + + cancel_delayed_work_sync(&dev->cal_work); + cancel_delayed_work_sync(&dev->freq_cal.work); + + mutex_lock(&dev->hw_atomic_mutex); + ret = __mt7601u_phy_set_channel(dev, chandef); + mutex_unlock(&dev->hw_atomic_mutex); + if (ret) + return ret; + + if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) + return 0; + + ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, + MT_CALIBRATE_INTERVAL); + if (dev->freq_cal.enabled) + ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, + MT_FREQ_CAL_INIT_DELAY); + return 0; +} + +#define BBP_R47_FLAG GENMASK(2, 0) +#define BBP_R47_F_TSSI 0 +#define BBP_R47_F_PKT_T 1 +#define BBP_R47_F_TX_RATE 2 +#define BBP_R47_F_TEMP 4 +/** + * mt7601u_bbp_r47_get - read value through BBP R47/R49 pair + * @dev: pointer to adapter structure + * @reg: value of BBP R47 before the operation + * @flag: one of the BBP_R47_F_* flags + * + * Convenience helper for reading values through BBP R47/R49 pair. + * Takes old value of BBP R47 as @reg, because callers usually have it + * cached already. + * + * Return: value of BBP R49. + */ +static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag) +{ + flag |= reg & ~BBP_R47_FLAG; + mt7601u_bbp_wr(dev, 47, flag); + usleep_range(500, 700); + return mt7601u_bbp_rr(dev, 49); +} + +static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev) +{ + u8 bbp_val, temp; + u32 rf_bp, rf_set; + int i; + + rf_set = mt7601u_rr(dev, MT_RF_SETTING_0); + rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0); + + mt7601u_wr(dev, MT_RF_BYPASS_0, 0); + mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010); + mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010); + + bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10); + + mt7601u_bbp_wr(dev, 22, 0x40); + + for (i = 100; i && (bbp_val & 0x10); i--) + bbp_val = mt7601u_bbp_rr(dev, 47); + + temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP); + + mt7601u_bbp_wr(dev, 22, 0); + + bbp_val = mt7601u_bbp_rr(dev, 21); + bbp_val |= 0x02; + mt7601u_bbp_wr(dev, 21, bbp_val); + bbp_val &= ~0x02; + mt7601u_bbp_wr(dev, 21, bbp_val); + + mt7601u_wr(dev, MT_RF_BYPASS_0, 0); + mt7601u_wr(dev, MT_RF_SETTING_0, rf_set); + mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp); + + trace_read_temp(dev, temp); + return temp; +} + +static s8 mt7601u_read_temp(struct mt7601u_dev *dev) +{ + int i; + u8 val; + s8 temp; + + val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10); + + /* Note: this rarely succeeds, temp can change even if it fails. */ + for (i = 100; i && (val & 0x10); i--) + val = mt7601u_bbp_rr(dev, 47); + + temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP); + + trace_read_temp(dev, temp); + return temp; +} + +static void mt7601u_rxdc_cal(struct mt7601u_dev *dev) +{ + static const struct mt76_reg_pair intro[] = { + { 158, 0x8d }, { 159, 0xfc }, + { 158, 0x8c }, { 159, 0x4c }, + }, outro[] = { + { 158, 0x8d }, { 159, 0xe0 }, + }; + u32 mac_ctrl; + int i, ret; + + mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX); + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + intro, ARRAY_SIZE(intro)); + if (ret) + dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret); + + for (i = 20; i; i--) { + usleep_range(300, 500); + + mt7601u_bbp_wr(dev, 158, 0x8c); + if (mt7601u_bbp_rr(dev, 159) == 0x0c) + break; + } + if (!i) + dev_err(dev->dev, "%s timed out\n", __func__); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); + + ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, + outro, ARRAY_SIZE(outro)); + if (ret) + dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); +} + +void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev) +{ + mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp); + + mt7601u_rxdc_cal(dev); +} + +/* Note: function copied from vendor driver */ +static s16 lin2dBd(u16 linear) +{ + short exp = 0; + unsigned int mantisa; + int app, dBd; + + if (WARN_ON(!linear)) + return -10000; + + mantisa = linear; + + exp = fls(mantisa) - 16; + if (exp > 0) + mantisa >>= exp; + else + mantisa <<= abs(exp); + + if (mantisa <= 0xb800) + app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600); + else + app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00); + if (app < 0) + app = 0; + + dBd = ((15 + exp) << 15) + app; + dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7); + dBd = (dBd >> 10); + + return dBd; +} + +static void +mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db) +{ + struct tssi_data *d = &dev->ee->tssi_data; + int init_offset; + + init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10; + + mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP, + int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP); +} + +static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev) +{ + u8 rf_vga, rf_mixer, bbp_r47; + int i, j; + s8 res[4]; + s16 tssi_init_db, tssi_init_hvga_db; + + mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030); + mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0); + + mt7601u_bbp_wr(dev, 58, 0); + mt7601u_bbp_wr(dev, 241, 0x2); + mt7601u_bbp_wr(dev, 23, 0x8); + bbp_r47 = mt7601u_bbp_rr(dev, 47); + + /* Set VGA gain */ + rf_vga = mt7601u_rf_rr(dev, 5, 3); + mt7601u_rf_wr(dev, 5, 3, 8); + + /* Mixer disable */ + rf_mixer = mt7601u_rf_rr(dev, 4, 39); + mt7601u_rf_wr(dev, 4, 39, 0); + + for (i = 0; i < 4; i++) { + mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0); + + mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02); + mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11); + + /* BBP TSSI initial and soft reset */ + mt7601u_bbp_wr(dev, 22, 0); + mt7601u_bbp_wr(dev, 244, 0); + + mt7601u_bbp_wr(dev, 21, 1); + udelay(1); + mt7601u_bbp_wr(dev, 21, 0); + + /* TSSI measurement */ + mt7601u_bbp_wr(dev, 47, 0x50); + mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40); + + for (j = 20; j; j--) + if (!(mt7601u_bbp_rr(dev, 47) & 0x10)) + break; + if (!j) + dev_err(dev->dev, "%s timed out\n", __func__); + + /* TSSI read */ + mt7601u_bbp_wr(dev, 47, 0x40); + res[i] = mt7601u_bbp_rr(dev, 49); + } + + tssi_init_db = lin2dBd((short)res[1] - res[0]); + tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4); + dev->tssi_init = res[0]; + dev->tssi_init_hvga = res[2]; + dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db; + + dev_dbg(dev->dev, + "TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n", + dev->tssi_init, tssi_init_db, dev->tssi_init_hvga, + tssi_init_hvga_db, dev->tssi_init_hvga_offset_db); + + mt7601u_bbp_wr(dev, 22, 0); + mt7601u_bbp_wr(dev, 244, 0); + + mt7601u_bbp_wr(dev, 21, 1); + udelay(1); + mt7601u_bbp_wr(dev, 21, 0); + + mt7601u_wr(dev, MT_RF_BYPASS_0, 0); + mt7601u_wr(dev, MT_RF_SETTING_0, 0); + + mt7601u_rf_wr(dev, 5, 3, rf_vga); + mt7601u_rf_wr(dev, 4, 39, rf_mixer); + mt7601u_bbp_wr(dev, 47, bbp_r47); + + mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db); +} + +static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on) +{ + int ret, temp, hi_temp = 400, lo_temp = -200; + + temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE; + dev->curr_temp = temp; + + /* DPD Calibration */ + if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) { + dev->dpd_temp = temp; + + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); + if (ret) + return ret; + + mt7601u_vco_cal(dev); + + dev_dbg(dev->dev, "Recalibrate DPD\n"); + } + + /* PLL Lock Protect */ + if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */ + dev->pll_lock_protect = true; + + mt7601u_rf_wr(dev, 4, 4, 6); + mt7601u_rf_clear(dev, 4, 10, 0x30); + + dev_dbg(dev->dev, "PLL lock protect on - too cold\n"); + } else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */ + dev->pll_lock_protect = false; + + mt7601u_rf_wr(dev, 4, 4, 0); + mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10); + + dev_dbg(dev->dev, "PLL lock protect off\n"); + } + + if (on) { + hi_temp -= 50; + lo_temp -= 50; + } + + /* BBP CR for H, L, N temperature */ + if (temp > hi_temp) + return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high"); + else if (temp > lo_temp) + return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal"); + else + return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low"); +} + +/* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */ +static int mt7601u_current_tx_power(struct mt7601u_dev *dev) +{ + return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1]; +} + +static bool mt7601u_use_hvga(struct mt7601u_dev *dev) +{ + return !(mt7601u_current_tx_power(dev) > 20); +} + +static s16 +mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate) +{ + static const s16 decode_tb[] = { 0, 8847, -5734, -5734 }; + u32 reg; + + switch (phy_mode) { + case MT_PHY_TYPE_OFDM: + tx_rate += 4; + case MT_PHY_TYPE_CCK: + reg = dev->rf_pa_mode[0]; + break; + default: + reg = dev->rf_pa_mode[1]; + break; + } + + return decode_tb[(reg >> (tx_rate * 2)) & 0x3]; +} + +static struct mt7601u_tssi_params +mt7601u_tssi_params_get(struct mt7601u_dev *dev) +{ + static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 }; + static const int static_power[4] = { 0, -49152, -98304, 49152 }; + struct mt7601u_tssi_params p; + u8 bbp_r47, pkt_type, tx_rate; + struct power_per_rate *rate_table; + + bbp_r47 = mt7601u_bbp_rr(dev, 47); + + p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI); + dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP); + pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T); + + p.trgt_power = mt7601u_current_tx_power(dev); + + switch (pkt_type & 0x03) { + case MT_PHY_TYPE_CCK: + tx_rate = (pkt_type >> 4) & 0x03; + rate_table = dev->ee->power_rate_table.cck; + break; + + case MT_PHY_TYPE_OFDM: + tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07]; + rate_table = dev->ee->power_rate_table.ofdm; + break; + + default: + tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE); + tx_rate &= 0x7f; + rate_table = dev->ee->power_rate_table.ht; + break; + } + + if (dev->bw == MT_BW_20) + p.trgt_power += rate_table[tx_rate / 2].bw20; + else + p.trgt_power += rate_table[tx_rate / 2].bw40; + + p.trgt_power <<= 12; + + dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power); + + p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03, + tx_rate); + + /* Channel 14, cck, bw20 */ + if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) { + if (mt7601u_bbp_rr(dev, 4) & 0x20) + p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830; + else + p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576; + } + + p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03]; + + p.trgt_power += dev->ee->tssi_data.tx0_delta_offset; + + dev_dbg(dev->dev, + "tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n", + p.tssi0, p.trgt_power, dev->raw_temp, pkt_type); + + return p; +} + +static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev) +{ + return !(mt7601u_bbp_rr(dev, 47) & 0x10); +} + +static int mt7601u_tssi_cal(struct mt7601u_dev *dev) +{ + struct mt7601u_tssi_params params; + int curr_pwr, diff_pwr; + char tssi_offset; + s8 tssi_init; + s16 tssi_m_dc, tssi_db; + bool hvga; + u32 val; + + if (!dev->ee->tssi_enabled) + return 0; + + hvga = mt7601u_use_hvga(dev); + if (!dev->tssi_read_trig) + return mt7601u_mcu_tssi_read_kick(dev, hvga); + + if (!mt7601u_tssi_read_ready(dev)) + return 0; + + params = mt7601u_tssi_params_get(dev); + + tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init); + tssi_m_dc = params.tssi0 - tssi_init; + tssi_db = lin2dBd(tssi_m_dc); + dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n", + tssi_m_dc, tssi_db, hvga); + + if (dev->chandef.chan->hw_value < 5) + tssi_offset = dev->ee->tssi_data.offset[0]; + else if (dev->chandef.chan->hw_value < 9) + tssi_offset = dev->ee->tssi_data.offset[1]; + else + tssi_offset = dev->ee->tssi_data.offset[2]; + + if (hvga) + tssi_db -= dev->tssi_init_hvga_offset_db; + + curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9); + diff_pwr = params.trgt_power - curr_pwr; + dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr); + + if (params.tssi0 > 126 && diff_pwr > 0) { + dev_err(dev->dev, "Error: TSSI upper saturation\n"); + diff_pwr = 0; + } + if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) { + dev_err(dev->dev, "Error: TSSI lower saturation\n"); + diff_pwr = 0; + } + + if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 && + (abs(diff_pwr) > abs(dev->prev_pwr_diff) || + (diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff))) + diff_pwr = 0; + else + dev->prev_pwr_diff = diff_pwr; + + diff_pwr += (diff_pwr > 0) ? 2048 : -2048; + diff_pwr /= 4096; + + dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr); + + val = mt7601u_rr(dev, MT_TX_ALC_CFG_1); + curr_pwr = s6_to_int(MT76_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val)); + diff_pwr += curr_pwr; + val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr); + mt7601u_wr(dev, MT_TX_ALC_CFG_1, val); + + return mt7601u_mcu_tssi_read_kick(dev, hvga); +} + +static u8 mt7601u_agc_default(struct mt7601u_dev *dev) +{ + return (dev->ee->lna_gain - 8) * 2 + 0x34; +} + +static void mt7601u_agc_reset(struct mt7601u_dev *dev) +{ + u8 agc = mt7601u_agc_default(dev); + + mt7601u_bbp_wr(dev, 66, agc); +} + +void mt7601u_agc_save(struct mt7601u_dev *dev) +{ + dev->agc_save = mt7601u_bbp_rr(dev, 66); +} + +void mt7601u_agc_restore(struct mt7601u_dev *dev) +{ + mt7601u_bbp_wr(dev, 66, dev->agc_save); +} + +static void mt7601u_agc_tune(struct mt7601u_dev *dev) +{ + u8 val = mt7601u_agc_default(dev); + + if (test_bit(MT7601U_STATE_SCANNING, &dev->state)) + return; + + /* Note: only in STA mode and not dozing; perhaps do this only if + * there is enough rssi updates since last run? + * Rssi updates are only on beacons and U2M so should work... + */ + spin_lock_bh(&dev->con_mon_lock); + if (dev->avg_rssi <= -70) + val -= 0x20; + else if (dev->avg_rssi <= -60) + val -= 0x10; + spin_unlock_bh(&dev->con_mon_lock); + + if (val != mt7601u_bbp_rr(dev, 66)) + mt7601u_bbp_wr(dev, 66, val); + + /* TODO: also if lost a lot of beacons try resetting + * (see RTMPSetAGCInitValue() call in mlme.c). + */ +} + +static void mt7601u_phy_calibrate(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + cal_work.work); + + mt7601u_agc_tune(dev); + mt7601u_tssi_cal(dev); + /* If TSSI calibration was run it already updated temperature. */ + if (!dev->ee->tssi_enabled) + dev->raw_temp = mt7601u_read_temp(dev); + mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */ + + ieee80211_queue_delayed_work(dev->hw, &dev->cal_work, + MT_CALIBRATE_INTERVAL); +} + +static unsigned long +__mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode) +{ + u8 activate_threshold, deactivate_threshold; + + trace_freq_cal_offset(dev, phy_mode, last_offset); + + /* No beacons received - reschedule soon */ + if (last_offset == MT_FREQ_OFFSET_INVALID) + return MT_FREQ_CAL_ADJ_INTERVAL; + + switch (phy_mode) { + case MT_PHY_TYPE_CCK: + activate_threshold = 19; + deactivate_threshold = 5; + break; + case MT_PHY_TYPE_OFDM: + activate_threshold = 102; + deactivate_threshold = 32; + break; + case MT_PHY_TYPE_HT: + case MT_PHY_TYPE_HT_GF: + activate_threshold = 82; + deactivate_threshold = 20; + break; + default: + WARN_ON(1); + return MT_FREQ_CAL_CHECK_INTERVAL; + } + + if (abs(last_offset) >= activate_threshold) + dev->freq_cal.adjusting = true; + else if (abs(last_offset) <= deactivate_threshold) + dev->freq_cal.adjusting = false; + + if (!dev->freq_cal.adjusting) + return MT_FREQ_CAL_CHECK_INTERVAL; + + if (last_offset > deactivate_threshold) { + if (dev->freq_cal.freq > 0) + dev->freq_cal.freq--; + else + dev->freq_cal.adjusting = false; + } else if (last_offset < -deactivate_threshold) { + if (dev->freq_cal.freq < 0xbf) + dev->freq_cal.freq++; + else + dev->freq_cal.adjusting = false; + } + + trace_freq_cal_adjust(dev, dev->freq_cal.freq); + mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq); + mt7601u_vco_cal(dev); + + return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL : + MT_FREQ_CAL_CHECK_INTERVAL; +} + +static void mt7601u_phy_freq_cal(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + freq_cal.work.work); + s8 last_offset; + u8 phy_mode; + unsigned long delay; + + spin_lock_bh(&dev->con_mon_lock); + last_offset = dev->bcn_freq_off; + phy_mode = dev->bcn_phy_mode; + spin_unlock_bh(&dev->con_mon_lock); + + delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode); + ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay); + + spin_lock_bh(&dev->con_mon_lock); + dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; + spin_unlock_bh(&dev->con_mon_lock); +} + +void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev, + struct ieee80211_bss_conf *info) +{ + if (!info->assoc) + cancel_delayed_work_sync(&dev->freq_cal.work); + + /* Start/stop collecting beacon data */ + spin_lock_bh(&dev->con_mon_lock); + ether_addr_copy(dev->ap_bssid, info->bssid); + dev->avg_rssi = 0; + dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID; + spin_unlock_bh(&dev->con_mon_lock); + + dev->freq_cal.freq = dev->ee->rf_freq_off; + dev->freq_cal.enabled = info->assoc; + dev->freq_cal.adjusting = false; + + if (info->assoc) + ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, + MT_FREQ_CAL_INIT_DELAY); +} + +static int mt7601u_init_cal(struct mt7601u_dev *dev) +{ + u32 mac_ctrl; + int ret; + + dev->raw_temp = mt7601u_read_bootup_temp(dev); + dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) * + MT_EE_TEMPERATURE_SLOPE; + dev->dpd_temp = dev->curr_temp; + + mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL); + + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0); + if (ret) + return ret; + + ret = mt7601u_rf_rr(dev, 0, 4); + if (ret < 0) + return ret; + ret |= 0x80; + ret = mt7601u_rf_wr(dev, 0, 4, ret); + if (ret) + return ret; + msleep(2); + + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0); + if (ret) + return ret; + + mt7601u_rxdc_cal(dev); + + ret = mt7601u_set_bw_filter(dev, true); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0); + if (ret) + return ret; + ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp); + if (ret) + return ret; + + mt7601u_rxdc_cal(dev); + + mt7601u_tssi_dc_gain_cal(dev); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl); + + mt7601u_temp_comp(dev, true); + + return 0; +} + +int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw) +{ + u32 val, old; + + if (bw == dev->bw) { + /* Vendor driver does the rmc even when no change is needed. */ + mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); + + return 0; + } + dev->bw = bw; + + /* Stop MAC for the time of bw change */ + old = mt7601u_rr(dev, MT_MAC_SYS_CTRL); + val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX); + mt7601u_wr(dev, MT_MAC_SYS_CTRL, val); + mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, + 0, 500000); + + mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10); + + mt7601u_wr(dev, MT_MAC_SYS_CTRL, old); + + return mt7601u_load_bbp_temp_table_bw(dev); +} + +/** + * mt7601u_set_rx_path - set rx path in BBP + * @dev: pointer to adapter structure + * @path: rx path to set values are 0-based + */ +void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path) +{ + mt7601u_bbp_rmw(dev, 3, 0x18, path << 3); +} + +/** + * mt7601u_set_tx_dac - set which tx DAC to use + * @dev: pointer to adapter structure + * @path: DAC index, values are 0-based + */ +void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac) +{ + mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3); +} + +int mt7601u_phy_init(struct mt7601u_dev *dev) +{ + int ret; + + dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0); + dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1); + + ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, 0, rf_central, + ARRAY_SIZE(rf_central)); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, 0, rf_channel, + ARRAY_SIZE(rf_channel)); + if (ret) + return ret; + ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga)); + if (ret) + return ret; + + ret = mt7601u_init_cal(dev); + if (ret) + return ret; + + dev->prev_pwr_diff = 100; + + INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate); + INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal); + + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/regs.h b/drivers/net/wireless/mediatek/mt7601u/regs.h new file mode 100644 index 0000000000000..afd8978e83fac --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/regs.h @@ -0,0 +1,636 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT76_REGS_H +#define __MT76_REGS_H + +#include + +#ifndef GENMASK +#define GENMASK(h, l) (((U32_C(1) << ((h) - (l) + 1)) - 1) << (l)) +#endif + +#define MT_ASIC_VERSION 0x0000 + +#define MT76XX_REV_E3 0x22 +#define MT76XX_REV_E4 0x33 + +#define MT_CMB_CTRL 0x0020 +#define MT_CMB_CTRL_XTAL_RDY BIT(22) +#define MT_CMB_CTRL_PLL_LD BIT(23) + +#define MT_EFUSE_CTRL 0x0024 +#define MT_EFUSE_CTRL_AOUT GENMASK(5, 0) +#define MT_EFUSE_CTRL_MODE GENMASK(7, 6) +#define MT_EFUSE_CTRL_LDO_OFF_TIME GENMASK(13, 8) +#define MT_EFUSE_CTRL_LDO_ON_TIME GENMASK(15, 14) +#define MT_EFUSE_CTRL_AIN GENMASK(25, 16) +#define MT_EFUSE_CTRL_KICK BIT(30) +#define MT_EFUSE_CTRL_SEL BIT(31) + +#define MT_EFUSE_DATA_BASE 0x0028 +#define MT_EFUSE_DATA(_n) (MT_EFUSE_DATA_BASE + ((_n) << 2)) + +#define MT_COEXCFG0 0x0040 +#define MT_COEXCFG0_COEX_EN BIT(0) + +#define MT_WLAN_FUN_CTRL 0x0080 +#define MT_WLAN_FUN_CTRL_WLAN_EN BIT(0) +#define MT_WLAN_FUN_CTRL_WLAN_CLK_EN BIT(1) +#define MT_WLAN_FUN_CTRL_WLAN_RESET_RF BIT(2) + +#define MT_WLAN_FUN_CTRL_WLAN_RESET BIT(3) /* MT76x0 */ +#define MT_WLAN_FUN_CTRL_CSR_F20M_CKEN BIT(3) /* MT76x2 */ + +#define MT_WLAN_FUN_CTRL_PCIE_CLK_REQ BIT(4) +#define MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL BIT(5) +#define MT_WLAN_FUN_CTRL_INV_ANT_SEL BIT(6) +#define MT_WLAN_FUN_CTRL_WAKE_HOST BIT(7) + +#define MT_WLAN_FUN_CTRL_THERM_RST BIT(8) /* MT76x2 */ +#define MT_WLAN_FUN_CTRL_THERM_CKEN BIT(9) /* MT76x2 */ + +#define MT_WLAN_FUN_CTRL_GPIO_IN GENMASK(15, 8) /* MT76x0 */ +#define MT_WLAN_FUN_CTRL_GPIO_OUT GENMASK(23, 16) /* MT76x0 */ +#define MT_WLAN_FUN_CTRL_GPIO_OUT_EN GENMASK(31, 24) /* MT76x0 */ + +#define MT_XO_CTRL0 0x0100 +#define MT_XO_CTRL1 0x0104 +#define MT_XO_CTRL2 0x0108 +#define MT_XO_CTRL3 0x010c +#define MT_XO_CTRL4 0x0110 + +#define MT_XO_CTRL5 0x0114 +#define MT_XO_CTRL5_C2_VAL GENMASK(14, 8) + +#define MT_XO_CTRL6 0x0118 +#define MT_XO_CTRL6_C2_CTRL GENMASK(14, 8) + +#define MT_XO_CTRL7 0x011c + +#define MT_WLAN_MTC_CTRL 0x10148 +#define MT_WLAN_MTC_CTRL_MTCMOS_PWR_UP BIT(0) +#define MT_WLAN_MTC_CTRL_PWR_ACK BIT(12) +#define MT_WLAN_MTC_CTRL_PWR_ACK_S BIT(13) +#define MT_WLAN_MTC_CTRL_BBP_MEM_PD GENMASK(19, 16) +#define MT_WLAN_MTC_CTRL_PBF_MEM_PD BIT(20) +#define MT_WLAN_MTC_CTRL_FCE_MEM_PD BIT(21) +#define MT_WLAN_MTC_CTRL_TSO_MEM_PD BIT(22) +#define MT_WLAN_MTC_CTRL_BBP_MEM_RB BIT(24) +#define MT_WLAN_MTC_CTRL_PBF_MEM_RB BIT(25) +#define MT_WLAN_MTC_CTRL_FCE_MEM_RB BIT(26) +#define MT_WLAN_MTC_CTRL_TSO_MEM_RB BIT(27) +#define MT_WLAN_MTC_CTRL_STATE_UP BIT(28) + +#define MT_INT_SOURCE_CSR 0x0200 +#define MT_INT_MASK_CSR 0x0204 + +#define MT_INT_RX_DONE(_n) BIT(_n) +#define MT_INT_RX_DONE_ALL GENMASK(1, 0) +#define MT_INT_TX_DONE_ALL GENMASK(13, 4) +#define MT_INT_TX_DONE(_n) BIT(_n + 4) +#define MT_INT_RX_COHERENT BIT(16) +#define MT_INT_TX_COHERENT BIT(17) +#define MT_INT_ANY_COHERENT BIT(18) +#define MT_INT_MCU_CMD BIT(19) +#define MT_INT_TBTT BIT(20) +#define MT_INT_PRE_TBTT BIT(21) +#define MT_INT_TX_STAT BIT(22) +#define MT_INT_AUTO_WAKEUP BIT(23) +#define MT_INT_GPTIMER BIT(24) +#define MT_INT_RXDELAYINT BIT(26) +#define MT_INT_TXDELAYINT BIT(27) + +#define MT_WPDMA_GLO_CFG 0x0208 +#define MT_WPDMA_GLO_CFG_TX_DMA_EN BIT(0) +#define MT_WPDMA_GLO_CFG_TX_DMA_BUSY BIT(1) +#define MT_WPDMA_GLO_CFG_RX_DMA_EN BIT(2) +#define MT_WPDMA_GLO_CFG_RX_DMA_BUSY BIT(3) +#define MT_WPDMA_GLO_CFG_DMA_BURST_SIZE GENMASK(5, 4) +#define MT_WPDMA_GLO_CFG_TX_WRITEBACK_DONE BIT(6) +#define MT_WPDMA_GLO_CFG_BIG_ENDIAN BIT(7) +#define MT_WPDMA_GLO_CFG_HDR_SEG_LEN GENMASK(15, 8) +#define MT_WPDMA_GLO_CFG_CLK_GATE_DIS BIT(30) +#define MT_WPDMA_GLO_CFG_RX_2B_OFFSET BIT(31) + +#define MT_WPDMA_RST_IDX 0x020c + +#define MT_WPDMA_DELAY_INT_CFG 0x0210 + +#define MT_WMM_AIFSN 0x0214 +#define MT_WMM_AIFSN_MASK GENMASK(3, 0) +#define MT_WMM_AIFSN_SHIFT(_n) ((_n) * 4) + +#define MT_WMM_CWMIN 0x0218 +#define MT_WMM_CWMIN_MASK GENMASK(3, 0) +#define MT_WMM_CWMIN_SHIFT(_n) ((_n) * 4) + +#define MT_WMM_CWMAX 0x021c +#define MT_WMM_CWMAX_MASK GENMASK(3, 0) +#define MT_WMM_CWMAX_SHIFT(_n) ((_n) * 4) + +#define MT_WMM_TXOP_BASE 0x0220 +#define MT_WMM_TXOP(_n) (MT_WMM_TXOP_BASE + (((_n) / 2) << 2)) +#define MT_WMM_TXOP_SHIFT(_n) ((_n & 1) * 16) +#define MT_WMM_TXOP_MASK GENMASK(15, 0) + +#define MT_FCE_DMA_ADDR 0x0230 +#define MT_FCE_DMA_LEN 0x0234 + +#define MT_USB_DMA_CFG 0x238 +#define MT_USB_DMA_CFG_RX_BULK_AGG_TOUT GENMASK(7, 0) +#define MT_USB_DMA_CFG_RX_BULK_AGG_LMT GENMASK(15, 8) +#define MT_USB_DMA_CFG_PHY_CLR BIT(16) +#define MT_USB_DMA_CFG_TX_CLR BIT(19) +#define MT_USB_DMA_CFG_TXOP_HALT BIT(20) +#define MT_USB_DMA_CFG_RX_BULK_AGG_EN BIT(21) +#define MT_USB_DMA_CFG_RX_BULK_EN BIT(22) +#define MT_USB_DMA_CFG_TX_BULK_EN BIT(23) +#define MT_USB_DMA_CFG_UDMA_RX_WL_DROP BIT(25) +#define MT_USB_DMA_CFG_EP_OUT_VALID GENMASK(29, 27) +#define MT_USB_DMA_CFG_RX_BUSY BIT(30) +#define MT_USB_DMA_CFG_TX_BUSY BIT(31) + +#define MT_TSO_CTRL 0x0250 +#define MT_HEADER_TRANS_CTRL_REG 0x0260 + +#define MT_US_CYC_CFG 0x02a4 +#define MT_US_CYC_CNT GENMASK(7, 0) + +#define MT_TX_RING_BASE 0x0300 +#define MT_RX_RING_BASE 0x03c0 +#define MT_RING_SIZE 0x10 + +#define MT_TX_HW_QUEUE_MCU 8 +#define MT_TX_HW_QUEUE_MGMT 9 + +#define MT_PBF_SYS_CTRL 0x0400 +#define MT_PBF_SYS_CTRL_MCU_RESET BIT(0) +#define MT_PBF_SYS_CTRL_DMA_RESET BIT(1) +#define MT_PBF_SYS_CTRL_MAC_RESET BIT(2) +#define MT_PBF_SYS_CTRL_PBF_RESET BIT(3) +#define MT_PBF_SYS_CTRL_ASY_RESET BIT(4) + +#define MT_PBF_CFG 0x0404 +#define MT_PBF_CFG_TX0Q_EN BIT(0) +#define MT_PBF_CFG_TX1Q_EN BIT(1) +#define MT_PBF_CFG_TX2Q_EN BIT(2) +#define MT_PBF_CFG_TX3Q_EN BIT(3) +#define MT_PBF_CFG_RX0Q_EN BIT(4) +#define MT_PBF_CFG_RX_DROP_EN BIT(8) + +#define MT_PBF_TX_MAX_PCNT 0x0408 +#define MT_PBF_RX_MAX_PCNT 0x040c + +#define MT_BCN_OFFSET_BASE 0x041c +#define MT_BCN_OFFSET(_n) (MT_BCN_OFFSET_BASE + ((_n) << 2)) + +#define MT_RF_CSR_CFG 0x0500 +#define MT_RF_CSR_CFG_DATA GENMASK(7, 0) +#define MT_RF_CSR_CFG_REG_ID GENMASK(13, 8) +#define MT_RF_CSR_CFG_REG_BANK GENMASK(17, 14) +#define MT_RF_CSR_CFG_WR BIT(30) +#define MT_RF_CSR_CFG_KICK BIT(31) + +#define MT_RF_BYPASS_0 0x0504 +#define MT_RF_BYPASS_1 0x0508 +#define MT_RF_SETTING_0 0x050c + +#define MT_RF_DATA_WRITE 0x0524 + +#define MT_RF_CTRL 0x0528 +#define MT_RF_CTRL_ADDR GENMASK(11, 0) +#define MT_RF_CTRL_WRITE BIT(12) +#define MT_RF_CTRL_BUSY BIT(13) +#define MT_RF_CTRL_IDX BIT(16) + +#define MT_RF_DATA_READ 0x052c + +#define MT_FCE_PSE_CTRL 0x0800 +#define MT_FCE_PARAMETERS 0x0804 +#define MT_FCE_CSO 0x0808 + +#define MT_FCE_L2_STUFF 0x080c +#define MT_FCE_L2_STUFF_HT_L2_EN BIT(0) +#define MT_FCE_L2_STUFF_QOS_L2_EN BIT(1) +#define MT_FCE_L2_STUFF_RX_STUFF_EN BIT(2) +#define MT_FCE_L2_STUFF_TX_STUFF_EN BIT(3) +#define MT_FCE_L2_STUFF_WR_MPDU_LEN_EN BIT(4) +#define MT_FCE_L2_STUFF_MVINV_BSWAP BIT(5) +#define MT_FCE_L2_STUFF_TS_CMD_QSEL_EN GENMASK(15, 8) +#define MT_FCE_L2_STUFF_TS_LEN_EN GENMASK(23, 16) +#define MT_FCE_L2_STUFF_OTHER_PORT GENMASK(25, 24) + +#define MT_FCE_WLAN_FLOW_CONTROL1 0x0824 + +#define MT_TX_CPU_FROM_FCE_BASE_PTR 0x09a0 +#define MT_TX_CPU_FROM_FCE_MAX_COUNT 0x09a4 +#define MT_TX_CPU_FROM_FCE_CPU_DESC_IDX 0x09a8 + +#define MT_FCE_PDMA_GLOBAL_CONF 0x09c4 + +#define MT_PAUSE_ENABLE_CONTROL1 0x0a38 + +#define MT_FCE_SKIP_FS 0x0a6c + +#define MT_MAC_CSR0 0x1000 + +#define MT_MAC_SYS_CTRL 0x1004 +#define MT_MAC_SYS_CTRL_RESET_CSR BIT(0) +#define MT_MAC_SYS_CTRL_RESET_BBP BIT(1) +#define MT_MAC_SYS_CTRL_ENABLE_TX BIT(2) +#define MT_MAC_SYS_CTRL_ENABLE_RX BIT(3) + +#define MT_MAC_ADDR_DW0 0x1008 +#define MT_MAC_ADDR_DW1 0x100c +#define MT_MAC_ADDR_DW1_U2ME_MASK GENMASK(23, 16) + +#define MT_MAC_BSSID_DW0 0x1010 +#define MT_MAC_BSSID_DW1 0x1014 +#define MT_MAC_BSSID_DW1_ADDR GENMASK(15, 0) +#define MT_MAC_BSSID_DW1_MBSS_MODE GENMASK(17, 16) +#define MT_MAC_BSSID_DW1_MBEACON_N GENMASK(20, 18) +#define MT_MAC_BSSID_DW1_MBSS_LOCAL_BIT BIT(21) +#define MT_MAC_BSSID_DW1_MBSS_MODE_B2 BIT(22) +#define MT_MAC_BSSID_DW1_MBEACON_N_B3 BIT(23) +#define MT_MAC_BSSID_DW1_MBSS_IDX_BYTE GENMASK(26, 24) + +#define MT_MAX_LEN_CFG 0x1018 +#define MT_MAX_LEN_CFG_AMPDU GENMASK(13, 12) + +#define MT_BBP_CSR_CFG 0x101c +#define MT_BBP_CSR_CFG_VAL GENMASK(7, 0) +#define MT_BBP_CSR_CFG_REG_NUM GENMASK(15, 8) +#define MT_BBP_CSR_CFG_READ BIT(16) +#define MT_BBP_CSR_CFG_BUSY BIT(17) +#define MT_BBP_CSR_CFG_PAR_DUR BIT(18) +#define MT_BBP_CSR_CFG_RW_MODE BIT(19) + +#define MT_AMPDU_MAX_LEN_20M1S 0x1030 +#define MT_AMPDU_MAX_LEN_20M2S 0x1034 +#define MT_AMPDU_MAX_LEN_40M1S 0x1038 +#define MT_AMPDU_MAX_LEN_40M2S 0x103c +#define MT_AMPDU_MAX_LEN 0x1040 + +#define MT_WCID_DROP_BASE 0x106c +#define MT_WCID_DROP(_n) (MT_WCID_DROP_BASE + ((_n) >> 5) * 4) +#define MT_WCID_DROP_MASK(_n) BIT((_n) % 32) + +#define MT_BCN_BYPASS_MASK 0x108c + +#define MT_MAC_APC_BSSID_BASE 0x1090 +#define MT_MAC_APC_BSSID_L(_n) (MT_MAC_APC_BSSID_BASE + ((_n) * 8)) +#define MT_MAC_APC_BSSID_H(_n) (MT_MAC_APC_BSSID_BASE + ((_n) * 8 + 4)) +#define MT_MAC_APC_BSSID_H_ADDR GENMASK(15, 0) +#define MT_MAC_APC_BSSID0_H_EN BIT(16) + +#define MT_XIFS_TIME_CFG 0x1100 +#define MT_XIFS_TIME_CFG_CCK_SIFS GENMASK(7, 0) +#define MT_XIFS_TIME_CFG_OFDM_SIFS GENMASK(15, 8) +#define MT_XIFS_TIME_CFG_OFDM_XIFS GENMASK(19, 16) +#define MT_XIFS_TIME_CFG_EIFS GENMASK(28, 20) +#define MT_XIFS_TIME_CFG_BB_RXEND_EN BIT(29) + +#define MT_BKOFF_SLOT_CFG 0x1104 +#define MT_BKOFF_SLOT_CFG_SLOTTIME GENMASK(7, 0) +#define MT_BKOFF_SLOT_CFG_CC_DELAY GENMASK(11, 8) + +#define MT_BEACON_TIME_CFG 0x1114 +#define MT_BEACON_TIME_CFG_INTVAL GENMASK(15, 0) +#define MT_BEACON_TIME_CFG_TIMER_EN BIT(16) +#define MT_BEACON_TIME_CFG_SYNC_MODE GENMASK(18, 17) +#define MT_BEACON_TIME_CFG_TBTT_EN BIT(19) +#define MT_BEACON_TIME_CFG_BEACON_TX BIT(20) +#define MT_BEACON_TIME_CFG_TSF_COMP GENMASK(31, 24) + +#define MT_TBTT_SYNC_CFG 0x1118 +#define MT_TBTT_TIMER_CFG 0x1124 + +#define MT_INT_TIMER_CFG 0x1128 +#define MT_INT_TIMER_CFG_PRE_TBTT GENMASK(15, 0) +#define MT_INT_TIMER_CFG_GP_TIMER GENMASK(31, 16) + +#define MT_INT_TIMER_EN 0x112c +#define MT_INT_TIMER_EN_PRE_TBTT_EN BIT(0) +#define MT_INT_TIMER_EN_GP_TIMER_EN BIT(1) + +#define MT_MAC_STATUS 0x1200 +#define MT_MAC_STATUS_TX BIT(0) +#define MT_MAC_STATUS_RX BIT(1) + +#define MT_PWR_PIN_CFG 0x1204 +#define MT_AUX_CLK_CFG 0x120c + +#define MT_BB_PA_MODE_CFG0 0x1214 +#define MT_BB_PA_MODE_CFG1 0x1218 +#define MT_RF_PA_MODE_CFG0 0x121c +#define MT_RF_PA_MODE_CFG1 0x1220 + +#define MT_RF_PA_MODE_ADJ0 0x1228 +#define MT_RF_PA_MODE_ADJ1 0x122c + +#define MT_DACCLK_EN_DLY_CFG 0x1264 + +#define MT_EDCA_CFG_BASE 0x1300 +#define MT_EDCA_CFG_AC(_n) (MT_EDCA_CFG_BASE + ((_n) << 2)) +#define MT_EDCA_CFG_TXOP GENMASK(7, 0) +#define MT_EDCA_CFG_AIFSN GENMASK(11, 8) +#define MT_EDCA_CFG_CWMIN GENMASK(15, 12) +#define MT_EDCA_CFG_CWMAX GENMASK(19, 16) + +#define MT_TX_PWR_CFG_0 0x1314 +#define MT_TX_PWR_CFG_1 0x1318 +#define MT_TX_PWR_CFG_2 0x131c +#define MT_TX_PWR_CFG_3 0x1320 +#define MT_TX_PWR_CFG_4 0x1324 + +#define MT_TX_BAND_CFG 0x132c +#define MT_TX_BAND_CFG_UPPER_40M BIT(0) +#define MT_TX_BAND_CFG_5G BIT(1) +#define MT_TX_BAND_CFG_2G BIT(2) + +#define MT_HT_FBK_TO_LEGACY 0x1384 +#define MT_TX_MPDU_ADJ_INT 0x1388 + +#define MT_TX_PWR_CFG_7 0x13d4 +#define MT_TX_PWR_CFG_8 0x13d8 +#define MT_TX_PWR_CFG_9 0x13dc + +#define MT_TX_SW_CFG0 0x1330 +#define MT_TX_SW_CFG1 0x1334 +#define MT_TX_SW_CFG2 0x1338 + +#define MT_TXOP_CTRL_CFG 0x1340 +#define MT_TXOP_TRUN_EN GENMASK(5, 0) +#define MT_TXOP_EXT_CCA_DLY GENMASK(15, 8) +#define MT_TXOP_CTRL + +#define MT_TX_RTS_CFG 0x1344 +#define MT_TX_RTS_CFG_RETRY_LIMIT GENMASK(7, 0) +#define MT_TX_RTS_CFG_THRESH GENMASK(23, 8) +#define MT_TX_RTS_FALLBACK BIT(24) + +#define MT_TX_TIMEOUT_CFG 0x1348 +#define MT_TX_RETRY_CFG 0x134c +#define MT_TX_LINK_CFG 0x1350 +#define MT_HT_FBK_CFG0 0x1354 +#define MT_HT_FBK_CFG1 0x1358 +#define MT_LG_FBK_CFG0 0x135c +#define MT_LG_FBK_CFG1 0x1360 + +#define MT_CCK_PROT_CFG 0x1364 +#define MT_OFDM_PROT_CFG 0x1368 +#define MT_MM20_PROT_CFG 0x136c +#define MT_MM40_PROT_CFG 0x1370 +#define MT_GF20_PROT_CFG 0x1374 +#define MT_GF40_PROT_CFG 0x1378 + +#define MT_PROT_RATE GENMASK(15, 0) +#define MT_PROT_CTRL_RTS_CTS BIT(16) +#define MT_PROT_CTRL_CTS2SELF BIT(17) +#define MT_PROT_NAV_SHORT BIT(18) +#define MT_PROT_NAV_LONG BIT(19) +#define MT_PROT_TXOP_ALLOW_CCK BIT(20) +#define MT_PROT_TXOP_ALLOW_OFDM BIT(21) +#define MT_PROT_TXOP_ALLOW_MM20 BIT(22) +#define MT_PROT_TXOP_ALLOW_MM40 BIT(23) +#define MT_PROT_TXOP_ALLOW_GF20 BIT(24) +#define MT_PROT_TXOP_ALLOW_GF40 BIT(25) +#define MT_PROT_RTS_THR_EN BIT(26) +#define MT_PROT_RATE_CCK_11 0x0003 +#define MT_PROT_RATE_OFDM_6 0x4000 +#define MT_PROT_RATE_OFDM_24 0x4004 +#define MT_PROT_RATE_DUP_OFDM_24 0x4084 +#define MT_PROT_TXOP_ALLOW_ALL GENMASK(25, 20) +#define MT_PROT_TXOP_ALLOW_BW20 (MT_PROT_TXOP_ALLOW_ALL & \ + ~MT_PROT_TXOP_ALLOW_MM40 & \ + ~MT_PROT_TXOP_ALLOW_GF40) + +#define MT_EXP_ACK_TIME 0x1380 + +#define MT_TX_PWR_CFG_0_EXT 0x1390 +#define MT_TX_PWR_CFG_1_EXT 0x1394 + +#define MT_TX_FBK_LIMIT 0x1398 +#define MT_TX_FBK_LIMIT_MPDU_FBK GENMASK(7, 0) +#define MT_TX_FBK_LIMIT_AMPDU_FBK GENMASK(15, 8) +#define MT_TX_FBK_LIMIT_MPDU_UP_CLEAR BIT(16) +#define MT_TX_FBK_LIMIT_AMPDU_UP_CLEAR BIT(17) +#define MT_TX_FBK_LIMIT_RATE_LUT BIT(18) + +#define MT_TX0_RF_GAIN_CORR 0x13a0 +#define MT_TX1_RF_GAIN_CORR 0x13a4 +#define MT_TX0_RF_GAIN_ATTEN 0x13a8 + +#define MT_TX_ALC_CFG_0 0x13b0 +#define MT_TX_ALC_CFG_0_CH_INIT_0 GENMASK(5, 0) +#define MT_TX_ALC_CFG_0_CH_INIT_1 GENMASK(13, 8) +#define MT_TX_ALC_CFG_0_LIMIT_0 GENMASK(21, 16) +#define MT_TX_ALC_CFG_0_LIMIT_1 GENMASK(29, 24) + +#define MT_TX_ALC_CFG_1 0x13b4 +#define MT_TX_ALC_CFG_1_TEMP_COMP GENMASK(5, 0) + +#define MT_TX_ALC_CFG_2 0x13a8 +#define MT_TX_ALC_CFG_2_TEMP_COMP GENMASK(5, 0) + +#define MT_TX0_BB_GAIN_ATTEN 0x13c0 + +#define MT_TX_ALC_VGA3 0x13c8 + +#define MT_TX_PROT_CFG6 0x13e0 +#define MT_TX_PROT_CFG7 0x13e4 +#define MT_TX_PROT_CFG8 0x13e8 + +#define MT_PIFS_TX_CFG 0x13ec + +#define MT_RX_FILTR_CFG 0x1400 + +#define MT_RX_FILTR_CFG_CRC_ERR BIT(0) +#define MT_RX_FILTR_CFG_PHY_ERR BIT(1) +#define MT_RX_FILTR_CFG_PROMISC BIT(2) +#define MT_RX_FILTR_CFG_OTHER_BSS BIT(3) +#define MT_RX_FILTR_CFG_VER_ERR BIT(4) +#define MT_RX_FILTR_CFG_MCAST BIT(5) +#define MT_RX_FILTR_CFG_BCAST BIT(6) +#define MT_RX_FILTR_CFG_DUP BIT(7) +#define MT_RX_FILTR_CFG_CFACK BIT(8) +#define MT_RX_FILTR_CFG_CFEND BIT(9) +#define MT_RX_FILTR_CFG_ACK BIT(10) +#define MT_RX_FILTR_CFG_CTS BIT(11) +#define MT_RX_FILTR_CFG_RTS BIT(12) +#define MT_RX_FILTR_CFG_PSPOLL BIT(13) +#define MT_RX_FILTR_CFG_BA BIT(14) +#define MT_RX_FILTR_CFG_BAR BIT(15) +#define MT_RX_FILTR_CFG_CTRL_RSV BIT(16) + +#define MT_AUTO_RSP_CFG 0x1404 + +#define MT_AUTO_RSP_PREAMB_SHORT BIT(4) + +#define MT_LEGACY_BASIC_RATE 0x1408 +#define MT_HT_BASIC_RATE 0x140c + +#define MT_RX_PARSER_CFG 0x1418 +#define MT_RX_PARSER_RX_SET_NAV_ALL BIT(0) + +#define MT_EXT_CCA_CFG 0x141c +#define MT_EXT_CCA_CFG_CCA0 GENMASK(1, 0) +#define MT_EXT_CCA_CFG_CCA1 GENMASK(3, 2) +#define MT_EXT_CCA_CFG_CCA2 GENMASK(5, 4) +#define MT_EXT_CCA_CFG_CCA3 GENMASK(7, 6) +#define MT_EXT_CCA_CFG_CCA_MASK GENMASK(11, 8) +#define MT_EXT_CCA_CFG_ED_CCA_MASK GENMASK(15, 12) + +#define MT_TX_SW_CFG3 0x1478 + +#define MT_PN_PAD_MODE 0x150c + +#define MT_TXOP_HLDR_ET 0x1608 + +#define MT_PROT_AUTO_TX_CFG 0x1648 + +#define MT_RX_STA_CNT0 0x1700 +#define MT_RX_STA_CNT1 0x1704 +#define MT_RX_STA_CNT2 0x1708 +#define MT_TX_STA_CNT0 0x170c +#define MT_TX_STA_CNT1 0x1710 +#define MT_TX_STA_CNT2 0x1714 + +/* Vendor driver defines content of the second word of STAT_FIFO as follows: + * MT_TX_STAT_FIFO_RATE GENMASK(26, 16) + * MT_TX_STAT_FIFO_ETXBF BIT(27) + * MT_TX_STAT_FIFO_SND BIT(28) + * MT_TX_STAT_FIFO_ITXBF BIT(29) + * However, tests show that b16-31 have the same layout as TXWI rate_ctl + * with rate set to rate at which frame was acked. + */ +#define MT_TX_STAT_FIFO 0x1718 +#define MT_TX_STAT_FIFO_VALID BIT(0) +#define MT_TX_STAT_FIFO_PID_TYPE GENMASK(4, 1) +#define MT_TX_STAT_FIFO_SUCCESS BIT(5) +#define MT_TX_STAT_FIFO_AGGR BIT(6) +#define MT_TX_STAT_FIFO_ACKREQ BIT(7) +#define MT_TX_STAT_FIFO_WCID GENMASK(15, 8) +#define MT_TX_STAT_FIFO_RATE GENMASK(31, 16) + +#define MT_TX_AGG_STAT 0x171c + +#define MT_TX_AGG_CNT_BASE0 0x1720 + +#define MT_MPDU_DENSITY_CNT 0x1740 + +#define MT_TX_AGG_CNT_BASE1 0x174c + +#define MT_TX_AGG_CNT(_id) ((_id) < 8 ? \ + MT_TX_AGG_CNT_BASE0 + ((_id) << 2) : \ + MT_TX_AGG_CNT_BASE1 + ((_id - 8) << 2)) + +#define MT_TX_STAT_FIFO_EXT 0x1798 +#define MT_TX_STAT_FIFO_EXT_RETRY GENMASK(7, 0) + +#define MT_BBP_CORE_BASE 0x2000 +#define MT_BBP_IBI_BASE 0x2100 +#define MT_BBP_AGC_BASE 0x2300 +#define MT_BBP_TXC_BASE 0x2400 +#define MT_BBP_RXC_BASE 0x2500 +#define MT_BBP_TXO_BASE 0x2600 +#define MT_BBP_TXBE_BASE 0x2700 +#define MT_BBP_RXFE_BASE 0x2800 +#define MT_BBP_RXO_BASE 0x2900 +#define MT_BBP_DFS_BASE 0x2a00 +#define MT_BBP_TR_BASE 0x2b00 +#define MT_BBP_CAL_BASE 0x2c00 +#define MT_BBP_DSC_BASE 0x2e00 +#define MT_BBP_PFMU_BASE 0x2f00 + +#define MT_BBP(_type, _n) (MT_BBP_##_type##_BASE + ((_n) << 2)) + +#define MT_BBP_CORE_R1_BW GENMASK(4, 3) + +#define MT_BBP_AGC_R0_CTRL_CHAN GENMASK(9, 8) +#define MT_BBP_AGC_R0_BW GENMASK(14, 12) + +/* AGC, R4/R5 */ +#define MT_BBP_AGC_LNA_GAIN GENMASK(21, 16) + +/* AGC, R8/R9 */ +#define MT_BBP_AGC_GAIN GENMASK(14, 8) + +#define MT_BBP_AGC20_RSSI0 GENMASK(7, 0) +#define MT_BBP_AGC20_RSSI1 GENMASK(15, 8) + +#define MT_BBP_TXBE_R0_CTRL_CHAN GENMASK(1, 0) + +#define MT_WCID_ADDR_BASE 0x1800 +#define MT_WCID_ADDR(_n) (MT_WCID_ADDR_BASE + (_n) * 8) + +#define MT_SRAM_BASE 0x4000 + +#define MT_WCID_KEY_BASE 0x8000 +#define MT_WCID_KEY(_n) (MT_WCID_KEY_BASE + (_n) * 32) + +#define MT_WCID_IV_BASE 0xa000 +#define MT_WCID_IV(_n) (MT_WCID_IV_BASE + (_n) * 8) + +#define MT_WCID_ATTR_BASE 0xa800 +#define MT_WCID_ATTR(_n) (MT_WCID_ATTR_BASE + (_n) * 4) + +#define MT_WCID_ATTR_PAIRWISE BIT(0) +#define MT_WCID_ATTR_PKEY_MODE GENMASK(3, 1) +#define MT_WCID_ATTR_BSS_IDX GENMASK(6, 4) +#define MT_WCID_ATTR_RXWI_UDF GENMASK(9, 7) +#define MT_WCID_ATTR_PKEY_MODE_EXT BIT(10) +#define MT_WCID_ATTR_BSS_IDX_EXT BIT(11) +#define MT_WCID_ATTR_WAPI_MCBC BIT(15) +#define MT_WCID_ATTR_WAPI_KEYID GENMASK(31, 24) + +#define MT_SKEY_BASE_0 0xac00 +#define MT_SKEY_BASE_1 0xb400 +#define MT_SKEY_0(_bss, _idx) \ + (MT_SKEY_BASE_0 + (4 * (_bss) + _idx) * 32) +#define MT_SKEY_1(_bss, _idx) \ + (MT_SKEY_BASE_1 + (4 * ((_bss) & 7) + _idx) * 32) +#define MT_SKEY(_bss, _idx) \ + ((_bss & 8) ? MT_SKEY_1(_bss, _idx) : MT_SKEY_0(_bss, _idx)) + +#define MT_SKEY_MODE_BASE_0 0xb000 +#define MT_SKEY_MODE_BASE_1 0xb3f0 +#define MT_SKEY_MODE_0(_bss) \ + (MT_SKEY_MODE_BASE_0 + ((_bss / 2) << 2)) +#define MT_SKEY_MODE_1(_bss) \ + (MT_SKEY_MODE_BASE_1 + ((((_bss) & 7) / 2) << 2)) +#define MT_SKEY_MODE(_bss) \ + ((_bss & 8) ? MT_SKEY_MODE_1(_bss) : MT_SKEY_MODE_0(_bss)) +#define MT_SKEY_MODE_MASK GENMASK(3, 0) +#define MT_SKEY_MODE_SHIFT(_bss, _idx) (4 * ((_idx) + 4 * (_bss & 1))) + +#define MT_BEACON_BASE 0xc000 + +#define MT_TEMP_SENSOR 0x1d000 +#define MT_TEMP_SENSOR_VAL GENMASK(6, 0) + +enum mt76_cipher_type { + MT_CIPHER_NONE, + MT_CIPHER_WEP40, + MT_CIPHER_WEP104, + MT_CIPHER_TKIP, + MT_CIPHER_AES_CCMP, + MT_CIPHER_CKIP40, + MT_CIPHER_CKIP104, + MT_CIPHER_CKIP128, + MT_CIPHER_WAPI, +}; + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/trace.c b/drivers/net/wireless/mediatek/mt7601u/trace.c new file mode 100644 index 0000000000000..8abdd3cd546d3 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/trace.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#ifndef __CHECKER__ +#define CREATE_TRACE_POINTS +#include "trace.h" + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/trace.h b/drivers/net/wireless/mediatek/mt7601u/trace.h new file mode 100644 index 0000000000000..289897300ef04 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/trace.h @@ -0,0 +1,400 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if !defined(__MT7601U_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) +#define __MT7601U_TRACE_H + +#include +#include "mt7601u.h" +#include "mac.h" + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM mt7601u + +#define MAXNAME 32 +#define DEV_ENTRY __array(char, wiphy_name, 32) +#define DEV_ASSIGN strlcpy(__entry->wiphy_name, \ + wiphy_name(dev->hw->wiphy), MAXNAME) +#define DEV_PR_FMT "%s " +#define DEV_PR_ARG __entry->wiphy_name + +#define REG_ENTRY __field(u32, reg) __field(u32, val) +#define REG_ASSIGN __entry->reg = reg; __entry->val = val +#define REG_PR_FMT "%04x=%08x" +#define REG_PR_ARG __entry->reg, __entry->val + +DECLARE_EVENT_CLASS(dev_reg_evt, + TP_PROTO(struct mt7601u_dev *dev, u32 reg, u32 val), + TP_ARGS(dev, reg, val), + TP_STRUCT__entry( + DEV_ENTRY + REG_ENTRY + ), + TP_fast_assign( + DEV_ASSIGN; + REG_ASSIGN; + ), + TP_printk( + DEV_PR_FMT REG_PR_FMT, + DEV_PR_ARG, REG_PR_ARG + ) +); + +DEFINE_EVENT(dev_reg_evt, reg_read, + TP_PROTO(struct mt7601u_dev *dev, u32 reg, u32 val), + TP_ARGS(dev, reg, val) +); + +DEFINE_EVENT(dev_reg_evt, reg_write, + TP_PROTO(struct mt7601u_dev *dev, u32 reg, u32 val), + TP_ARGS(dev, reg, val) +); + +TRACE_EVENT(mt_submit_urb, + TP_PROTO(struct mt7601u_dev *dev, struct urb *u), + TP_ARGS(dev, u), + TP_STRUCT__entry( + DEV_ENTRY __field(unsigned, pipe) __field(u32, len) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->pipe = u->pipe; + __entry->len = u->transfer_buffer_length; + ), + TP_printk(DEV_PR_FMT "p:%08x len:%u", + DEV_PR_ARG, __entry->pipe, __entry->len) +); + +#define trace_mt_submit_urb_sync(__dev, __pipe, __len) ({ \ + struct urb u; \ + u.pipe = __pipe; \ + u.transfer_buffer_length = __len; \ + trace_mt_submit_urb(__dev, &u); \ +}) + +TRACE_EVENT(mt_mcu_msg_send, + TP_PROTO(struct mt7601u_dev *dev, + struct sk_buff *skb, u32 csum, bool resp), + TP_ARGS(dev, skb, csum, resp), + TP_STRUCT__entry( + DEV_ENTRY + __field(u32, info) + __field(u32, csum) + __field(bool, resp) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->info = *(u32 *)skb->data; + __entry->csum = csum; + __entry->resp = resp; + ), + TP_printk(DEV_PR_FMT "i:%08x c:%08x r:%d", + DEV_PR_ARG, __entry->info, __entry->csum, __entry->resp) +); + +TRACE_EVENT(mt_vend_req, + TP_PROTO(struct mt7601u_dev *dev, unsigned pipe, u8 req, u8 req_type, + u16 val, u16 offset, void *buf, size_t buflen, int ret), + TP_ARGS(dev, pipe, req, req_type, val, offset, buf, buflen, ret), + TP_STRUCT__entry( + DEV_ENTRY + __field(unsigned, pipe) __field(u8, req) __field(u8, req_type) + __field(u16, val) __field(u16, offset) __field(void*, buf) + __field(int, buflen) __field(int, ret) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->pipe = pipe; + __entry->req = req; + __entry->req_type = req_type; + __entry->val = val; + __entry->offset = offset; + __entry->buf = buf; + __entry->buflen = buflen; + __entry->ret = ret; + ), + TP_printk(DEV_PR_FMT + "%d p:%08x req:%02hhx %02hhx val:%04hx %04hx buf:%d %d", + DEV_PR_ARG, __entry->ret, __entry->pipe, __entry->req, + __entry->req_type, __entry->val, __entry->offset, + !!__entry->buf, __entry->buflen) +); + +TRACE_EVENT(ee_read, + TP_PROTO(struct mt7601u_dev *dev, int offset, u16 val), + TP_ARGS(dev, offset, val), + TP_STRUCT__entry( + DEV_ENTRY + __field(int, o) __field(u16, v) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->o = offset; + __entry->v = val; + ), + TP_printk(DEV_PR_FMT "%04x=%04x", DEV_PR_ARG, __entry->o, __entry->v) +); + +DECLARE_EVENT_CLASS(dev_rf_reg_evt, + TP_PROTO(struct mt7601u_dev *dev, u8 bank, u8 reg, u8 val), + TP_ARGS(dev, bank, reg, val), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, bank) + __field(u8, reg) + __field(u8, val) + ), + TP_fast_assign( + DEV_ASSIGN; + REG_ASSIGN; + __entry->bank = bank; + ), + TP_printk( + DEV_PR_FMT "%02hhx:%02hhx=%02hhx", + DEV_PR_ARG, __entry->bank, __entry->reg, __entry->val + ) +); + +DEFINE_EVENT(dev_rf_reg_evt, rf_read, + TP_PROTO(struct mt7601u_dev *dev, u8 bank, u8 reg, u8 val), + TP_ARGS(dev, bank, reg, val) +); + +DEFINE_EVENT(dev_rf_reg_evt, rf_write, + TP_PROTO(struct mt7601u_dev *dev, u8 bank, u8 reg, u8 val), + TP_ARGS(dev, bank, reg, val) +); + +DECLARE_EVENT_CLASS(dev_bbp_reg_evt, + TP_PROTO(struct mt7601u_dev *dev, u8 reg, u8 val), + TP_ARGS(dev, reg, val), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, reg) + __field(u8, val) + ), + TP_fast_assign( + DEV_ASSIGN; + REG_ASSIGN; + ), + TP_printk( + DEV_PR_FMT "%02hhx=%02hhx", + DEV_PR_ARG, __entry->reg, __entry->val + ) +); + +DEFINE_EVENT(dev_bbp_reg_evt, bbp_read, + TP_PROTO(struct mt7601u_dev *dev, u8 reg, u8 val), + TP_ARGS(dev, reg, val) +); + +DEFINE_EVENT(dev_bbp_reg_evt, bbp_write, + TP_PROTO(struct mt7601u_dev *dev, u8 reg, u8 val), + TP_ARGS(dev, reg, val) +); + +DECLARE_EVENT_CLASS(dev_simple_evt, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, val) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->val = val; + ), + TP_printk( + DEV_PR_FMT "%02hhx", DEV_PR_ARG, __entry->val + ) +); + +DEFINE_EVENT(dev_simple_evt, temp_mode, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val) +); + +DEFINE_EVENT(dev_simple_evt, read_temp, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val) +); + +DEFINE_EVENT(dev_simple_evt, freq_cal_adjust, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val) +); + +TRACE_EVENT(freq_cal_offset, + TP_PROTO(struct mt7601u_dev *dev, u8 phy_mode, s8 freq_off), + TP_ARGS(dev, phy_mode, freq_off), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, phy_mode) + __field(s8, freq_off) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->phy_mode = phy_mode; + __entry->freq_off = freq_off; + ), + TP_printk(DEV_PR_FMT "phy:%02hhx off:%02hhx", + DEV_PR_ARG, __entry->phy_mode, __entry->freq_off) +); + +TRACE_EVENT(mt_rx, + TP_PROTO(struct mt7601u_dev *dev, struct mt7601u_rxwi *rxwi, u32 f), + TP_ARGS(dev, rxwi, f), + TP_STRUCT__entry( + DEV_ENTRY + __field_struct(struct mt7601u_rxwi, rxwi) + __field(u32, fce_info) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->rxwi = *rxwi; + __entry->fce_info = f; + ), + TP_printk(DEV_PR_FMT "rxi:%08x ctl:%08x frag_sn:%04hx rate:%04hx " + "uknw:%02hhx z:%02hhx%02hhx%02hhx snr:%02hhx " + "ant:%02hhx gain:%02hhx freq_o:%02hhx " + "r:%08x ea:%08x fce:%08x", DEV_PR_ARG, + le32_to_cpu(__entry->rxwi.rxinfo), + le32_to_cpu(__entry->rxwi.ctl), + le16_to_cpu(__entry->rxwi.frag_sn), + le16_to_cpu(__entry->rxwi.rate), + __entry->rxwi.unknown, + __entry->rxwi.zero[0], __entry->rxwi.zero[1], + __entry->rxwi.zero[2], + __entry->rxwi.snr, __entry->rxwi.ant, + __entry->rxwi.gain, __entry->rxwi.freq_off, + __entry->rxwi.resv2, __entry->rxwi.expert_ant, + __entry->fce_info) +); + +TRACE_EVENT(mt_tx, + TP_PROTO(struct mt7601u_dev *dev, struct sk_buff *skb, + struct mt76_sta *sta, struct mt76_txwi *h), + TP_ARGS(dev, skb, sta, h), + TP_STRUCT__entry( + DEV_ENTRY + __field_struct(struct mt76_txwi, h) + __field(struct sk_buff *, skb) + __field(struct mt76_sta *, sta) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->h = *h; + __entry->skb = skb; + __entry->sta = sta; + ), + TP_printk(DEV_PR_FMT "skb:%p sta:%p flg:%04hx rate_ctl:%04hx " + "ack:%02hhx wcid:%02hhx len_ctl:%05hx", DEV_PR_ARG, + __entry->skb, __entry->sta, + le16_to_cpu(__entry->h.flags), + le16_to_cpu(__entry->h.rate_ctl), + __entry->h.ack_ctl, __entry->h.wcid, + le16_to_cpu(__entry->h.len_ctl)) +); + +TRACE_EVENT(mt_tx_dma_done, + TP_PROTO(struct mt7601u_dev *dev, struct sk_buff *skb), + TP_ARGS(dev, skb), + TP_STRUCT__entry( + DEV_ENTRY + __field(struct sk_buff *, skb) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->skb = skb; + ), + TP_printk(DEV_PR_FMT "%p", DEV_PR_ARG, __entry->skb) +); + +TRACE_EVENT(mt_tx_status_cleaned, + TP_PROTO(struct mt7601u_dev *dev, int cleaned), + TP_ARGS(dev, cleaned), + TP_STRUCT__entry( + DEV_ENTRY + __field(int, cleaned) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->cleaned = cleaned; + ), + TP_printk(DEV_PR_FMT "%d", DEV_PR_ARG, __entry->cleaned) +); + +TRACE_EVENT(mt_tx_status, + TP_PROTO(struct mt7601u_dev *dev, u32 stat1, u32 stat2), + TP_ARGS(dev, stat1, stat2), + TP_STRUCT__entry( + DEV_ENTRY + __field(u32, stat1) __field(u32, stat2) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->stat1 = stat1; + __entry->stat2 = stat2; + ), + TP_printk(DEV_PR_FMT "%08x %08x", + DEV_PR_ARG, __entry->stat1, __entry->stat2) +); + +TRACE_EVENT(mt_rx_dma_aggr, + TP_PROTO(struct mt7601u_dev *dev, int cnt, bool paged), + TP_ARGS(dev, cnt, paged), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, cnt) + __field(bool, paged) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->cnt = cnt; + __entry->paged = paged; + ), + TP_printk(DEV_PR_FMT "cnt:%d paged:%d", + DEV_PR_ARG, __entry->cnt, __entry->paged) +); + +DEFINE_EVENT(dev_simple_evt, set_key, + TP_PROTO(struct mt7601u_dev *dev, u8 val), + TP_ARGS(dev, val) +); + +TRACE_EVENT(set_shared_key, + TP_PROTO(struct mt7601u_dev *dev, u8 vid, u8 key), + TP_ARGS(dev, vid, key), + TP_STRUCT__entry( + DEV_ENTRY + __field(u8, vid) + __field(u8, key) + ), + TP_fast_assign( + DEV_ASSIGN; + __entry->vid = vid; + __entry->key = key; + ), + TP_printk(DEV_PR_FMT "phy:%02hhx off:%02hhx", + DEV_PR_ARG, __entry->vid, __entry->key) +); + +#endif + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +#include diff --git a/drivers/net/wireless/mediatek/mt7601u/tx.c b/drivers/net/wireless/mediatek/mt7601u/tx.c new file mode 100644 index 0000000000000..0be2080ceab38 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/tx.c @@ -0,0 +1,319 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" +#include "trace.h" + +enum mt76_txq_id { + MT_TXQ_VO = IEEE80211_AC_VO, + MT_TXQ_VI = IEEE80211_AC_VI, + MT_TXQ_BE = IEEE80211_AC_BE, + MT_TXQ_BK = IEEE80211_AC_BK, + MT_TXQ_PSD, + MT_TXQ_MCU, + __MT_TXQ_MAX +}; + +/* Hardware uses mirrored order of queues with Q0 having the highest priority */ +static u8 q2hwq(u8 q) +{ + return q ^ 0x3; +} + +/* Take mac80211 Q id from the skb and translate it to hardware Q id */ +static u8 skb2q(struct sk_buff *skb) +{ + int qid = skb_get_queue_mapping(skb); + + if (WARN_ON(qid >= MT_TXQ_PSD)) { + qid = MT_TXQ_BE; + skb_set_queue_mapping(skb, qid); + } + + return q2hwq(qid); +} + +/* Note: TX retry reporting is a bit broken. + * Retries are reported only once per AMPDU and often come a frame early + * i.e. they are reported in the last status preceding the AMPDU. Apart + * from the fact that it's hard to know the length of the AMPDU (which is + * required to know to how many consecutive frames retries should be + * applied), if status comes early on full FIFO it gets lost and retries + * of the whole AMPDU become invisible. + * As a work-around encode the desired rate in PKT_ID of TX descriptor + * and based on that guess the retries (every rate is tried once). + * Only downside here is that for MCS0 we have to rely solely on + * transmission failures as no retries can ever be reported. + * Not having to read EXT_FIFO has a nice effect of doubling the number + * of reports which can be fetched. + * Also the vendor driver never uses the EXT_FIFO register so it may be + * undertested. + */ +static u8 mt7601u_tx_pktid_enc(struct mt7601u_dev *dev, u8 rate, bool is_probe) +{ + u8 encoded = (rate + 1) + is_probe * 8; + + /* Because PKT_ID 0 disables status reporting only 15 values are + * available but 16 are needed (8 MCS * 2 for encoding is_probe) + * - we need to cram together two rates. MCS0 and MCS7 with is_probe + * share PKT_ID 9. + */ + if (is_probe && rate == 7) + return encoded - 7; + + return encoded; +} + +static void +mt7601u_tx_pktid_dec(struct mt7601u_dev *dev, struct mt76_tx_status *stat) +{ + u8 req_rate = stat->pktid; + u8 eff_rate = stat->rate & 0x7; + + req_rate -= 1; + + if (req_rate > 7) { + stat->is_probe = true; + req_rate -= 8; + + /* Decide between MCS0 and MCS7 which share pktid 9 */ + if (!req_rate && eff_rate) + req_rate = 7; + } + + stat->retry = req_rate - eff_rate; +} + +static void mt7601u_tx_skb_remove_dma_overhead(struct sk_buff *skb, + struct ieee80211_tx_info *info) +{ + int pkt_len = (unsigned long)info->status.status_driver_data[0]; + + skb_pull(skb, sizeof(struct mt76_txwi) + 4); + if (ieee80211_get_hdrlen_from_skb(skb) % 4) + mt76_remove_hdr_pad(skb); + + skb_trim(skb, pkt_len); +} + +void mt7601u_tx_status(struct mt7601u_dev *dev, struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + mt7601u_tx_skb_remove_dma_overhead(skb, info); + + ieee80211_tx_info_clear_status(info); + info->status.rates[0].idx = -1; + info->flags |= IEEE80211_TX_STAT_ACK; + ieee80211_tx_status(dev->hw, skb); +} + +static int mt7601u_skb_rooms(struct mt7601u_dev *dev, struct sk_buff *skb) +{ + int hdr_len = ieee80211_get_hdrlen_from_skb(skb); + u32 need_head; + + need_head = sizeof(struct mt76_txwi) + 4; + if (hdr_len % 4) + need_head += 2; + + return skb_cow(skb, need_head); +} + +static struct mt76_txwi * +mt7601u_push_txwi(struct mt7601u_dev *dev, struct sk_buff *skb, + struct ieee80211_sta *sta, struct mt76_wcid *wcid, + int pkt_len) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_tx_rate *rate = &info->control.rates[0]; + struct mt76_txwi *txwi; + unsigned long flags; + bool is_probe; + u32 pkt_id; + u16 rate_ctl; + u8 nss; + + txwi = (struct mt76_txwi *)skb_push(skb, sizeof(struct mt76_txwi)); + memset(txwi, 0, sizeof(*txwi)); + + if (!wcid->tx_rate_set) + ieee80211_get_tx_rates(info->control.vif, sta, skb, + info->control.rates, 1); + + spin_lock_irqsave(&dev->lock, flags); + if (rate->idx < 0 || !rate->count) + rate_ctl = wcid->tx_rate; + else + rate_ctl = mt76_mac_tx_rate_val(dev, rate, &nss); + spin_unlock_irqrestore(&dev->lock, flags); + txwi->rate_ctl = cpu_to_le16(rate_ctl); + + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) + txwi->ack_ctl |= MT_TXWI_ACK_CTL_REQ; + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) + txwi->ack_ctl |= MT_TXWI_ACK_CTL_NSEQ; + + if ((info->flags & IEEE80211_TX_CTL_AMPDU) && sta) { + u8 ba_size = IEEE80211_MIN_AMPDU_BUF; + + ba_size <<= sta->ht_cap.ampdu_factor; + ba_size = min_t(int, 63, ba_size); + if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) + ba_size = 0; + txwi->ack_ctl |= MT76_SET(MT_TXWI_ACK_CTL_BA_WINDOW, ba_size); + + txwi->flags = cpu_to_le16(MT_TXWI_FLAGS_AMPDU | + MT76_SET(MT_TXWI_FLAGS_MPDU_DENSITY, + sta->ht_cap.ampdu_density)); + if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) + txwi->flags = 0; + } + + txwi->wcid = wcid->idx; + + is_probe = !!(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); + pkt_id = mt7601u_tx_pktid_enc(dev, rate_ctl & 0x7, is_probe); + pkt_len |= MT76_SET(MT_TXWI_LEN_PKTID, pkt_id); + txwi->len_ctl = cpu_to_le16(pkt_len); + + return txwi; +} + +void mt7601u_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct mt7601u_dev *dev = hw->priv; + struct ieee80211_vif *vif = info->control.vif; + struct ieee80211_sta *sta = control->sta; + struct mt76_sta *msta = NULL; + struct mt76_wcid *wcid = dev->mon_wcid; + struct mt76_txwi *txwi; + int pkt_len = skb->len; + int hw_q = skb2q(skb); + + BUILD_BUG_ON(ARRAY_SIZE(info->status.status_driver_data) < 1); + info->status.status_driver_data[0] = (void *)(unsigned long)pkt_len; + + if (mt7601u_skb_rooms(dev, skb) || mt76_insert_hdr_pad(skb)) { + ieee80211_free_txskb(dev->hw, skb); + return; + } + + if (sta) { + msta = (struct mt76_sta *) sta->drv_priv; + wcid = &msta->wcid; + } else if (vif) { + struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv; + + wcid = &mvif->group_wcid; + } + + txwi = mt7601u_push_txwi(dev, skb, sta, wcid, pkt_len); + + if (mt7601u_dma_enqueue_tx(dev, skb, wcid, hw_q)) + return; + + trace_mt_tx(dev, skb, msta, txwi); +} + +void mt7601u_tx_stat(struct work_struct *work) +{ + struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev, + stat_work.work); + struct mt76_tx_status stat; + unsigned long flags; + int cleaned = 0; + + while (!test_bit(MT7601U_STATE_REMOVED, &dev->state)) { + stat = mt7601u_mac_fetch_tx_status(dev); + if (!stat.valid) + break; + + mt7601u_tx_pktid_dec(dev, &stat); + mt76_send_tx_status(dev, &stat); + + cleaned++; + } + trace_mt_tx_status_cleaned(dev, cleaned); + + spin_lock_irqsave(&dev->tx_lock, flags); + if (cleaned) + queue_delayed_work(dev->stat_wq, &dev->stat_work, + msecs_to_jiffies(10)); + else if (test_and_clear_bit(MT7601U_STATE_MORE_STATS, &dev->state)) + queue_delayed_work(dev->stat_wq, &dev->stat_work, + msecs_to_jiffies(20)); + else + clear_bit(MT7601U_STATE_READING_STATS, &dev->state); + spin_unlock_irqrestore(&dev->tx_lock, flags); +} + +int mt7601u_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + u16 queue, const struct ieee80211_tx_queue_params *params) +{ + struct mt7601u_dev *dev = hw->priv; + u8 cw_min = 5, cw_max = 10, hw_q = q2hwq(queue); + u32 val; + + /* TODO: should we do funny things with the parameters? + * See what mt7601u_set_default_edca() used to do in init.c. + */ + + if (params->cw_min) + cw_min = fls(params->cw_min); + if (params->cw_max) + cw_max = fls(params->cw_max); + + WARN_ON(params->txop > 0xff); + WARN_ON(params->aifs > 0xf); + WARN_ON(cw_min > 0xf); + WARN_ON(cw_max > 0xf); + + val = MT76_SET(MT_EDCA_CFG_AIFSN, params->aifs) | + MT76_SET(MT_EDCA_CFG_CWMIN, cw_min) | + MT76_SET(MT_EDCA_CFG_CWMAX, cw_max); + /* TODO: based on user-controlled EnableTxBurst var vendor drv sets + * a really long txop on AC0 (see connect.c:2009) but only on + * connect? When not connected should be 0. + */ + if (!hw_q) + val |= 0x60; + else + val |= MT76_SET(MT_EDCA_CFG_TXOP, params->txop); + mt76_wr(dev, MT_EDCA_CFG_AC(hw_q), val); + + val = mt76_rr(dev, MT_WMM_TXOP(hw_q)); + val &= ~(MT_WMM_TXOP_MASK << MT_WMM_TXOP_SHIFT(hw_q)); + val |= params->txop << MT_WMM_TXOP_SHIFT(hw_q); + mt76_wr(dev, MT_WMM_TXOP(hw_q), val); + + val = mt76_rr(dev, MT_WMM_AIFSN); + val &= ~(MT_WMM_AIFSN_MASK << MT_WMM_AIFSN_SHIFT(hw_q)); + val |= params->aifs << MT_WMM_AIFSN_SHIFT(hw_q); + mt76_wr(dev, MT_WMM_AIFSN, val); + + val = mt76_rr(dev, MT_WMM_CWMIN); + val &= ~(MT_WMM_CWMIN_MASK << MT_WMM_CWMIN_SHIFT(hw_q)); + val |= cw_min << MT_WMM_CWMIN_SHIFT(hw_q); + mt76_wr(dev, MT_WMM_CWMIN, val); + + val = mt76_rr(dev, MT_WMM_CWMAX); + val &= ~(MT_WMM_CWMAX_MASK << MT_WMM_CWMAX_SHIFT(hw_q)); + val |= cw_max << MT_WMM_CWMAX_SHIFT(hw_q); + mt76_wr(dev, MT_WMM_CWMAX, val); + + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/usb.c b/drivers/net/wireless/mediatek/mt7601u/usb.c new file mode 100644 index 0000000000000..54dba40018651 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/usb.c @@ -0,0 +1,367 @@ +/* + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include "mt7601u.h" +#include "usb.h" +#include "trace.h" + +static struct usb_device_id mt7601u_device_table[] = { + { USB_DEVICE(0x0b05, 0x17d3) }, + { USB_DEVICE(0x0e8d, 0x760a) }, + { USB_DEVICE(0x0e8d, 0x760b) }, + { USB_DEVICE(0x13d3, 0x3431) }, + { USB_DEVICE(0x13d3, 0x3434) }, + { USB_DEVICE(0x148f, 0x7601) }, + { USB_DEVICE(0x148f, 0x760a) }, + { USB_DEVICE(0x148f, 0x760b) }, + { USB_DEVICE(0x148f, 0x760c) }, + { USB_DEVICE(0x148f, 0x760d) }, + { USB_DEVICE(0x2001, 0x3d04) }, + { USB_DEVICE(0x2717, 0x4106) }, + { USB_DEVICE(0x2955, 0x0001) }, + { USB_DEVICE(0x2955, 0x1001) }, + { USB_DEVICE(0x2a5f, 0x1000) }, + { USB_DEVICE(0x7392, 0x7710) }, + { 0, } +}; + +bool mt7601u_usb_alloc_buf(struct mt7601u_dev *dev, size_t len, + struct mt7601u_dma_buf *buf) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + + buf->len = len; + buf->urb = usb_alloc_urb(0, GFP_KERNEL); + buf->buf = usb_alloc_coherent(usb_dev, buf->len, GFP_KERNEL, &buf->dma); + + return !buf->urb || !buf->buf; +} + +void mt7601u_usb_free_buf(struct mt7601u_dev *dev, struct mt7601u_dma_buf *buf) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + + usb_free_coherent(usb_dev, buf->len, buf->buf, buf->dma); + usb_free_urb(buf->urb); +} + +int mt7601u_usb_submit_buf(struct mt7601u_dev *dev, int dir, int ep_idx, + struct mt7601u_dma_buf *buf, gfp_t gfp, + usb_complete_t complete_fn, void *context) +{ + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + unsigned pipe; + int ret; + + if (dir == USB_DIR_IN) + pipe = usb_rcvbulkpipe(usb_dev, dev->in_eps[ep_idx]); + else + pipe = usb_sndbulkpipe(usb_dev, dev->out_eps[ep_idx]); + + usb_fill_bulk_urb(buf->urb, usb_dev, pipe, buf->buf, buf->len, + complete_fn, context); + buf->urb->transfer_dma = buf->dma; + buf->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + trace_mt_submit_urb(dev, buf->urb); + ret = usb_submit_urb(buf->urb, gfp); + if (ret) + dev_err(dev->dev, "Error: submit URB dir:%d ep:%d failed:%d\n", + dir, ep_idx, ret); + return ret; +} + +void mt7601u_complete_urb(struct urb *urb) +{ + struct completion *cmpl = urb->context; + + complete(cmpl); +} + +static int +__mt7601u_vendor_request(struct mt7601u_dev *dev, const u8 req, + const u8 direction, const u16 val, const u16 offset, + void *buf, const size_t buflen) +{ + int i, ret; + struct usb_device *usb_dev = mt7601u_to_usb_dev(dev); + const u8 req_type = direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE; + const unsigned int pipe = (direction == USB_DIR_IN) ? + usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); + + for (i = 0; i < MT_VEND_REQ_MAX_RETRY; i++) { + ret = usb_control_msg(usb_dev, pipe, req, req_type, + val, offset, buf, buflen, + MT_VEND_REQ_TOUT_MS); + trace_mt_vend_req(dev, pipe, req, req_type, val, offset, + buf, buflen, ret); + + if (ret >= 0 || ret == -ENODEV) + return ret; + + msleep(5); + } + + dev_err(dev->dev, "Vendor request req:%02x off:%04x failed:%d\n", + req, offset, ret); + + return ret; +} + +int +mt7601u_vendor_request(struct mt7601u_dev *dev, const u8 req, + const u8 direction, const u16 val, const u16 offset, + void *buf, const size_t buflen) +{ + int ret; + + mutex_lock(&dev->vendor_req_mutex); + + ret = __mt7601u_vendor_request(dev, req, direction, val, offset, + buf, buflen); + if (ret == -ENODEV) + set_bit(MT7601U_STATE_REMOVED, &dev->state); + + mutex_unlock(&dev->vendor_req_mutex); + + return ret; +} + +void mt7601u_vendor_reset(struct mt7601u_dev *dev) +{ + mt7601u_vendor_request(dev, MT_VEND_DEV_MODE, USB_DIR_OUT, + MT_VEND_DEV_MODE_RESET, 0, NULL, 0); +} + +u32 mt7601u_rr(struct mt7601u_dev *dev, u32 offset) +{ + int ret; + __le32 reg; + u32 val; + + WARN_ONCE(offset > USHRT_MAX, "read high off:%08x", offset); + + ret = mt7601u_vendor_request(dev, MT_VEND_MULTI_READ, USB_DIR_IN, + 0, offset, ®, sizeof(reg)); + val = le32_to_cpu(reg); + if (ret > 0 && ret != sizeof(reg)) { + dev_err(dev->dev, "Error: wrong size read:%d off:%08x\n", + ret, offset); + val = ~0; + } + + trace_reg_read(dev, offset, val); + return val; +} + +int mt7601u_vendor_single_wr(struct mt7601u_dev *dev, const u8 req, + const u16 offset, const u32 val) +{ + int ret; + + ret = mt7601u_vendor_request(dev, req, USB_DIR_OUT, + val & 0xffff, offset, NULL, 0); + if (ret) + return ret; + return mt7601u_vendor_request(dev, req, USB_DIR_OUT, + val >> 16, offset + 2, NULL, 0); +} + +void mt7601u_wr(struct mt7601u_dev *dev, u32 offset, u32 val) +{ + WARN_ONCE(offset > USHRT_MAX, "write high off:%08x", offset); + + mt7601u_vendor_single_wr(dev, MT_VEND_WRITE, offset, val); + trace_reg_write(dev, offset, val); +} + +u32 mt7601u_rmw(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val) +{ + val |= mt7601u_rr(dev, offset) & ~mask; + mt7601u_wr(dev, offset, val); + return val; +} + +u32 mt7601u_rmc(struct mt7601u_dev *dev, u32 offset, u32 mask, u32 val) +{ + u32 reg = mt7601u_rr(dev, offset); + + val |= reg & ~mask; + if (reg != val) + mt7601u_wr(dev, offset, val); + return val; +} + +void mt7601u_wr_copy(struct mt7601u_dev *dev, u32 offset, + const void *data, int len) +{ + WARN_ONCE(offset & 3, "unaligned write copy off:%08x", offset); + WARN_ONCE(len & 3, "short write copy off:%08x", offset); + + mt7601u_burst_write_regs(dev, offset, data, len / 4); +} + +void mt7601u_addr_wr(struct mt7601u_dev *dev, const u32 offset, const u8 *addr) +{ + mt7601u_wr(dev, offset, get_unaligned_le32(addr)); + mt7601u_wr(dev, offset + 4, addr[4] | addr[5] << 8); +} + +static int mt7601u_assign_pipes(struct usb_interface *usb_intf, + struct mt7601u_dev *dev) +{ + struct usb_endpoint_descriptor *ep_desc; + struct usb_host_interface *intf_desc = usb_intf->cur_altsetting; + unsigned i, ep_i = 0, ep_o = 0; + + BUILD_BUG_ON(sizeof(dev->in_eps) < __MT_EP_IN_MAX); + BUILD_BUG_ON(sizeof(dev->out_eps) < __MT_EP_OUT_MAX); + + for (i = 0; i < intf_desc->desc.bNumEndpoints; i++) { + ep_desc = &intf_desc->endpoint[i].desc; + + if (usb_endpoint_is_bulk_in(ep_desc) && + ep_i++ < __MT_EP_IN_MAX) { + dev->in_eps[ep_i - 1] = usb_endpoint_num(ep_desc); + dev->in_max_packet = usb_endpoint_maxp(ep_desc); + /* Note: this is ignored by usb sub-system but vendor + * code does it. We can drop this at some point. + */ + dev->in_eps[ep_i - 1] |= USB_DIR_IN; + } else if (usb_endpoint_is_bulk_out(ep_desc) && + ep_o++ < __MT_EP_OUT_MAX) { + dev->out_eps[ep_o - 1] = usb_endpoint_num(ep_desc); + dev->out_max_packet = usb_endpoint_maxp(ep_desc); + } + } + + if (ep_i != __MT_EP_IN_MAX || ep_o != __MT_EP_OUT_MAX) { + dev_err(dev->dev, "Error: wrong pipe number in:%d out:%d\n", + ep_i, ep_o); + return -EINVAL; + } + + return 0; +} + +static int mt7601u_probe(struct usb_interface *usb_intf, + const struct usb_device_id *id) +{ + struct usb_device *usb_dev = interface_to_usbdev(usb_intf); + struct mt7601u_dev *dev; + u32 asic_rev, mac_rev; + int ret; + + dev = mt7601u_alloc_device(&usb_intf->dev); + if (!dev) + return -ENOMEM; + + usb_dev = usb_get_dev(usb_dev); + usb_reset_device(usb_dev); + + usb_set_intfdata(usb_intf, dev); + + ret = mt7601u_assign_pipes(usb_intf, dev); + if (ret) + goto err; + ret = mt7601u_wait_asic_ready(dev); + if (ret) + goto err; + + asic_rev = mt7601u_rr(dev, MT_ASIC_VERSION); + mac_rev = mt7601u_rr(dev, MT_MAC_CSR0); + dev_info(dev->dev, "ASIC revision: %08x MAC revision: %08x\n", + asic_rev, mac_rev); + + /* Note: vendor driver skips this check for MT7601U */ + if (!(mt7601u_rr(dev, MT_EFUSE_CTRL) & MT_EFUSE_CTRL_SEL)) + dev_warn(dev->dev, "Warning: eFUSE not present\n"); + + ret = mt7601u_init_hardware(dev); + if (ret) + goto err; + ret = mt7601u_register_device(dev); + if (ret) + goto err_hw; + + set_bit(MT7601U_STATE_INITIALIZED, &dev->state); + + return 0; +err_hw: + mt7601u_cleanup(dev); +err: + usb_set_intfdata(usb_intf, NULL); + usb_put_dev(interface_to_usbdev(usb_intf)); + + destroy_workqueue(dev->stat_wq); + ieee80211_free_hw(dev->hw); + return ret; +} + +static void mt7601u_disconnect(struct usb_interface *usb_intf) +{ + struct mt7601u_dev *dev = usb_get_intfdata(usb_intf); + + ieee80211_unregister_hw(dev->hw); + mt7601u_cleanup(dev); + + usb_set_intfdata(usb_intf, NULL); + usb_put_dev(interface_to_usbdev(usb_intf)); + + destroy_workqueue(dev->stat_wq); + ieee80211_free_hw(dev->hw); +} + +static int mt7601u_suspend(struct usb_interface *usb_intf, pm_message_t state) +{ + struct mt7601u_dev *dev = usb_get_intfdata(usb_intf); + + mt7601u_cleanup(dev); + + return 0; +} + +static int mt7601u_resume(struct usb_interface *usb_intf) +{ + struct mt7601u_dev *dev = usb_get_intfdata(usb_intf); + int ret; + + ret = mt7601u_init_hardware(dev); + if (ret) + return ret; + + set_bit(MT7601U_STATE_INITIALIZED, &dev->state); + + return 0; +} + +MODULE_DEVICE_TABLE(usb, mt7601u_device_table); +MODULE_FIRMWARE(MT7601U_FIRMWARE); +MODULE_LICENSE("GPL"); + +static struct usb_driver mt7601u_driver = { + .name = KBUILD_MODNAME, + .id_table = mt7601u_device_table, + .probe = mt7601u_probe, + .disconnect = mt7601u_disconnect, + .suspend = mt7601u_suspend, + .resume = mt7601u_resume, + .reset_resume = mt7601u_resume, + .soft_unbind = 1, + .disable_hub_initiated_lpm = 1, +}; +module_usb_driver(mt7601u_driver); diff --git a/drivers/net/wireless/mediatek/mt7601u/usb.h b/drivers/net/wireless/mediatek/mt7601u/usb.h new file mode 100644 index 0000000000000..49e188fa37983 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/usb.h @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2015 Jakub Kicinski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT7601U_USB_H +#define __MT7601U_USB_H + +#include "mt7601u.h" + +#define MT7601U_FIRMWARE "mt7601u.bin" + +#define MT_VEND_REQ_MAX_RETRY 10 +#define MT_VEND_REQ_TOUT_MS 300 + +#define MT_VEND_DEV_MODE_RESET 1 + +enum mt_vendor_req { + MT_VEND_DEV_MODE = 1, + MT_VEND_WRITE = 2, + MT_VEND_MULTI_READ = 7, + MT_VEND_WRITE_FCE = 0x42, +}; + +enum mt_usb_ep_in { + MT_EP_IN_PKT_RX, + MT_EP_IN_CMD_RESP, + __MT_EP_IN_MAX, +}; + +enum mt_usb_ep_out { + MT_EP_OUT_INBAND_CMD, + MT_EP_OUT_AC_BK, + MT_EP_OUT_AC_BE, + MT_EP_OUT_AC_VI, + MT_EP_OUT_AC_VO, + MT_EP_OUT_HCCA, + __MT_EP_OUT_MAX, +}; + +static inline struct usb_device *mt7601u_to_usb_dev(struct mt7601u_dev *mt7601u) +{ + return interface_to_usbdev(to_usb_interface(mt7601u->dev)); +} + +static inline bool mt7601u_urb_has_error(struct urb *urb) +{ + return urb->status && + urb->status != -ENOENT && + urb->status != -ECONNRESET && + urb->status != -ESHUTDOWN; +} + +bool mt7601u_usb_alloc_buf(struct mt7601u_dev *dev, size_t len, + struct mt7601u_dma_buf *buf); +void mt7601u_usb_free_buf(struct mt7601u_dev *dev, struct mt7601u_dma_buf *buf); +int mt7601u_usb_submit_buf(struct mt7601u_dev *dev, int dir, int ep_idx, + struct mt7601u_dma_buf *buf, gfp_t gfp, + usb_complete_t complete_fn, void *context); +void mt7601u_complete_urb(struct urb *urb); + +int mt7601u_vendor_request(struct mt7601u_dev *dev, const u8 req, + const u8 direction, const u16 val, const u16 offset, + void *buf, const size_t buflen); +void mt7601u_vendor_reset(struct mt7601u_dev *dev); +int mt7601u_vendor_single_wr(struct mt7601u_dev *dev, const u8 req, + const u16 offset, const u32 val); + +#endif diff --git a/drivers/net/wireless/mediatek/mt7601u/util.c b/drivers/net/wireless/mediatek/mt7601u/util.c new file mode 100644 index 0000000000000..7c1787c1ddcdb --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/util.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "mt7601u.h" + +void mt76_remove_hdr_pad(struct sk_buff *skb) +{ + int len = ieee80211_get_hdrlen_from_skb(skb); + + memmove(skb->data + 2, skb->data, len); + skb_pull(skb, 2); +} + +int mt76_insert_hdr_pad(struct sk_buff *skb) +{ + int len = ieee80211_get_hdrlen_from_skb(skb); + int ret; + + if (len % 4 == 0) + return 0; + + ret = skb_cow(skb, 2); + if (ret) + return ret; + + skb_push(skb, 2); + memmove(skb->data, skb->data + 2, len); + + skb->data[len] = 0; + skb->data[len + 1] = 0; + return 0; +} diff --git a/drivers/net/wireless/mediatek/mt7601u/util.h b/drivers/net/wireless/mediatek/mt7601u/util.h new file mode 100644 index 0000000000000..b89140bf12107 --- /dev/null +++ b/drivers/net/wireless/mediatek/mt7601u/util.h @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2014 Felix Fietkau + * Copyright (C) 2004 - 2009 Ivo van Doorn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT76_UTIL_H +#define __MT76_UTIL_H + +/* + * Power of two check, this will check + * if the mask that has been given contains and contiguous set of bits. + * Note that we cannot use the is_power_of_2() function since this + * check must be done at compile-time. + */ +#define is_power_of_two(x) ( !((x) & ((x)-1)) ) +#define low_bit_mask(x) ( ((x)-1) & ~(x) ) +#define is_valid_mask(x) is_power_of_two(1LU + (x) + low_bit_mask(x)) + +/* + * Macros to find first set bit in a variable. + * These macros behave the same as the __ffs() functions but + * the most important difference that this is done during + * compile-time rather then run-time. + */ +#define compile_ffs2(__x) \ + __builtin_choose_expr(((__x) & 0x1), 0, 1) + +#define compile_ffs4(__x) \ + __builtin_choose_expr(((__x) & 0x3), \ + (compile_ffs2((__x))), \ + (compile_ffs2((__x) >> 2) + 2)) + +#define compile_ffs8(__x) \ + __builtin_choose_expr(((__x) & 0xf), \ + (compile_ffs4((__x))), \ + (compile_ffs4((__x) >> 4) + 4)) + +#define compile_ffs16(__x) \ + __builtin_choose_expr(((__x) & 0xff), \ + (compile_ffs8((__x))), \ + (compile_ffs8((__x) >> 8) + 8)) + +#define compile_ffs32(__x) \ + __builtin_choose_expr(((__x) & 0xffff), \ + (compile_ffs16((__x))), \ + (compile_ffs16((__x) >> 16) + 16)) + +/* + * This macro will check the requirements for the FIELD{8,16,32} macros + * The mask should be a constant non-zero contiguous set of bits which + * does not exceed the given typelimit. + */ +#define FIELD_CHECK(__mask) \ + BUILD_BUG_ON(!(__mask) || !is_valid_mask(__mask)) + +#define MT76_SET(_mask, _val) \ + ({ \ + FIELD_CHECK(_mask); \ + (((u32) (_val)) << compile_ffs32(_mask)) & _mask; \ + }) + +#define MT76_GET(_mask, _val) \ + ({ \ + FIELD_CHECK(_mask); \ + (u32) (((_val) & _mask) >> compile_ffs32(_mask)); \ + }) + +#endif diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig new file mode 100644 index 0000000000000..8db297821f78c --- /dev/null +++ b/drivers/nvmem/Kconfig @@ -0,0 +1,39 @@ +menuconfig NVMEM + tristate "NVMEM Support" + select REGMAP + help + Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES... + + This framework is designed to provide a generic interface to NVMEM + from both the Linux Kernel and the userspace. + + This driver can also be built as a module. If so, the module + will be called nvmem_core. + + If unsure, say no. + +if NVMEM + +config QCOM_QFPROM + tristate "QCOM QFPROM Support" + depends on ARCH_QCOM || COMPILE_TEST + select REGMAP_MMIO + help + Say y here to enable QFPROM support. The QFPROM provides access + functions for QFPROM data to rest of the drivers via nvmem interface. + + This driver can also be built as a module. If so, the module + will be called nvmem_qfprom. + +config NVMEM_SUNXI_SID + tristate "Allwinner SoCs SID support" + depends on ARCH_SUNXI + select REGMAP_MMIO + help + This is a driver for the 'security ID' available on various Allwinner + devices. + + This driver can also be built as a module. If so, the module + will be called nvmem_sunxi_sid. + +endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile new file mode 100644 index 0000000000000..4328b930ad9a3 --- /dev/null +++ b/drivers/nvmem/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for nvmem drivers. +# + +obj-$(CONFIG_NVMEM) += nvmem_core.o +nvmem_core-y := core.o + +# Devices +obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o +nvmem_qfprom-y := qfprom.o +obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o +nvmem_sunxi_sid-y := sunxi_sid.o diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c new file mode 100644 index 0000000000000..ac03119be32df --- /dev/null +++ b/drivers/nvmem/core.c @@ -0,0 +1,1057 @@ +/* + * nvmem framework core. + * + * Copyright (C) 2015 Srinivas Kandagatla + * Copyright (C) 2013 Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct nvmem_device { + const char *name; + struct regmap *regmap; + struct module *owner; + struct device dev; + int stride; + int word_size; + int ncells; + int id; + int users; + size_t size; + bool read_only; +}; + +struct nvmem_cell { + const char *name; + int offset; + int bytes; + int bit_offset; + int nbits; + struct nvmem_device *nvmem; + struct list_head node; +}; + +static DEFINE_MUTEX(nvmem_mutex); +static DEFINE_IDA(nvmem_ida); + +static LIST_HEAD(nvmem_cells); +static DEFINE_MUTEX(nvmem_cells_mutex); + +#define to_nvmem_device(d) container_of(d, struct nvmem_device, dev) + +static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t pos, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nvmem_device *nvmem = to_nvmem_device(dev); + int rc; + + /* Stop the user from reading */ + if (pos > nvmem->size) + return 0; + + if (pos + count > nvmem->size) + count = nvmem->size - pos; + + count = round_down(count, nvmem->word_size); + + rc = regmap_raw_read(nvmem->regmap, pos, buf, count); + + if (IS_ERR_VALUE(rc)) + return rc; + + return count; +} + +static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t pos, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nvmem_device *nvmem = to_nvmem_device(dev); + int rc; + + /* Stop the user from writing */ + if (pos > nvmem->size) + return 0; + + if (pos + count > nvmem->size) + count = nvmem->size - pos; + + count = round_down(count, nvmem->word_size); + + rc = regmap_raw_write(nvmem->regmap, pos, buf, count); + + if (IS_ERR_VALUE(rc)) + return rc; + + return count; +} + +/* default read/write permissions */ +static struct bin_attribute bin_attr_rw_nvmem = { + .attr = { + .name = "nvmem", + .mode = S_IWUSR | S_IRUGO, + }, + .read = bin_attr_nvmem_read, + .write = bin_attr_nvmem_write, +}; + +/* read only permission */ +static struct bin_attribute bin_attr_ro_nvmem = { + .attr = { + .name = "nvmem", + .mode = S_IRUGO, + }, + .read = bin_attr_nvmem_read, +}; + +static void nvmem_release(struct device *dev) +{ + struct nvmem_device *nvmem = to_nvmem_device(dev); + + ida_simple_remove(&nvmem_ida, nvmem->id); + kfree(nvmem); +} + +static const struct device_type nvmem_provider_type = { + .release = nvmem_release, +}; + +static struct bus_type nvmem_bus_type = { + .name = "nvmem", +}; + +static int of_nvmem_match(struct device *dev, void *nvmem_np) +{ + return dev->of_node == nvmem_np; +} + +static struct nvmem_device *of_nvmem_find(struct device_node *nvmem_np) +{ + struct device *d; + + if (!nvmem_np) + return NULL; + + d = bus_find_device(&nvmem_bus_type, NULL, nvmem_np, of_nvmem_match); + + if (!d) + return NULL; + + return to_nvmem_device(d); +} + +static struct nvmem_cell *nvmem_find_cell(const char *cell_id) +{ + struct nvmem_cell *p; + + list_for_each_entry(p, &nvmem_cells, node) + if (p && !strcmp(p->name, cell_id)) + return p; + + return NULL; +} + +static void nvmem_cell_drop(struct nvmem_cell *cell) +{ + mutex_lock(&nvmem_cells_mutex); + list_del(&cell->node); + mutex_unlock(&nvmem_cells_mutex); + kfree(cell); +} + +static void nvmem_device_remove_all_cells(const struct nvmem_device *nvmem) +{ + struct nvmem_cell *cell; + struct list_head *p, *n; + + list_for_each_safe(p, n, &nvmem_cells) { + cell = list_entry(p, struct nvmem_cell, node); + if (cell->nvmem == nvmem) + nvmem_cell_drop(cell); + } +} + +static void nvmem_cell_add(struct nvmem_cell *cell) +{ + mutex_lock(&nvmem_cells_mutex); + list_add_tail(&cell->node, &nvmem_cells); + mutex_unlock(&nvmem_cells_mutex); +} + +static int nvmem_cell_info_to_nvmem_cell(struct nvmem_device *nvmem, + const struct nvmem_cell_info *info, + struct nvmem_cell *cell) +{ + cell->nvmem = nvmem; + cell->offset = info->offset; + cell->bytes = info->bytes; + cell->name = info->name; + + cell->bit_offset = info->bit_offset; + cell->nbits = info->nbits; + + if (cell->nbits) + cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset, + BITS_PER_BYTE); + + if (!IS_ALIGNED(cell->offset, nvmem->stride)) { + dev_err(&nvmem->dev, + "cell %s unaligned to nvmem stride %d\n", + cell->name, nvmem->stride); + return -EINVAL; + } + + return 0; +} + +static int nvmem_add_cells(struct nvmem_device *nvmem, + const struct nvmem_config *cfg) +{ + struct nvmem_cell **cells; + const struct nvmem_cell_info *info = cfg->cells; + int i, rval; + + cells = kzalloc(sizeof(*cells) * cfg->ncells, GFP_KERNEL); + if (!cells) + return -ENOMEM; + + for (i = 0; i < cfg->ncells; i++) { + cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL); + if (!cells[i]) { + rval = -ENOMEM; + goto err; + } + + rval = nvmem_cell_info_to_nvmem_cell(nvmem, &info[i], cells[i]); + if (IS_ERR_VALUE(rval)) { + kfree(cells[i]); + goto err; + } + + nvmem_cell_add(cells[i]); + } + + nvmem->ncells = cfg->ncells; + /* remove tmp array */ + kfree(cells); + + return 0; +err: + while (--i) + nvmem_cell_drop(cells[i]); + + return rval; +} + +/** + * nvmem_register() - Register a nvmem device for given nvmem_config. + * Also creates an binary entry in /sys/bus/nvmem/devices/dev-name/nvmem + * + * @config: nvmem device configuration with which nvmem device is created. + * + * Return: Will be an ERR_PTR() on error or a valid pointer to nvmem_device + * on success. + */ + +struct nvmem_device *nvmem_register(const struct nvmem_config *config) +{ + struct nvmem_device *nvmem; + struct device_node *np; + struct regmap *rm; + int rval; + + if (!config->dev) + return ERR_PTR(-EINVAL); + + rm = dev_get_regmap(config->dev, NULL); + if (!rm) { + dev_err(config->dev, "Regmap not found\n"); + return ERR_PTR(-EINVAL); + } + + nvmem = kzalloc(sizeof(*nvmem), GFP_KERNEL); + if (!nvmem) + return ERR_PTR(-ENOMEM); + + nvmem->id = ida_simple_get(&nvmem_ida, 0, 0, GFP_KERNEL); + if (nvmem->id < 0) { + kfree(nvmem); + return ERR_PTR(nvmem->id); + } + + nvmem->regmap = rm; + nvmem->owner = config->owner; + nvmem->stride = regmap_get_reg_stride(rm); + nvmem->word_size = regmap_get_val_bytes(rm); + nvmem->size = regmap_get_max_register(rm) + nvmem->stride; + nvmem->dev.type = &nvmem_provider_type; + nvmem->dev.bus = &nvmem_bus_type; + nvmem->dev.parent = config->dev; + np = config->dev->of_node; + nvmem->dev.of_node = np; + dev_set_name(&nvmem->dev, "%s%d", + config->name ? : "nvmem", config->id); + + nvmem->read_only = np ? of_property_read_bool(np, "read-only") : 0; + + nvmem->read_only |= config->read_only; + + device_initialize(&nvmem->dev); + + dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name); + + rval = device_add(&nvmem->dev); + if (rval) { + ida_simple_remove(&nvmem_ida, nvmem->id); + kfree(nvmem); + return ERR_PTR(rval); + } + + if (device_create_bin_file(&nvmem->dev, + nvmem->read_only ? &bin_attr_ro_nvmem : + &bin_attr_rw_nvmem)) + dev_warn(&nvmem->dev, "Failed to create sysfs binary file\n"); + + if (config->cells) + nvmem_add_cells(nvmem, config); + + return nvmem; +} +EXPORT_SYMBOL_GPL(nvmem_register); + +/** + * nvmem_unregister() - Unregister previously registered nvmem device + * + * @nvmem: Pointer to previously registered nvmem device. + * + * Return: Will be an negative on error or a zero on success. + */ +int nvmem_unregister(struct nvmem_device *nvmem) +{ + mutex_lock(&nvmem_mutex); + if (nvmem->users) { + mutex_unlock(&nvmem_mutex); + return -EBUSY; + } + mutex_unlock(&nvmem_mutex); + + nvmem_device_remove_all_cells(nvmem); + device_del(&nvmem->dev); + + return 0; +} +EXPORT_SYMBOL_GPL(nvmem_unregister); + +static struct nvmem_device *__nvmem_device_get(struct device_node *np, + struct nvmem_cell **cellp, + const char *cell_id) +{ + struct nvmem_device *nvmem = NULL; + + mutex_lock(&nvmem_mutex); + + if (np) { + nvmem = of_nvmem_find(np); + if (!nvmem) { + mutex_unlock(&nvmem_mutex); + return ERR_PTR(-EPROBE_DEFER); + } + } else { + struct nvmem_cell *cell = nvmem_find_cell(cell_id); + + if (cell) { + nvmem = cell->nvmem; + *cellp = cell; + } + + if (!nvmem) { + mutex_unlock(&nvmem_mutex); + return ERR_PTR(-ENOENT); + } + } + + nvmem->users++; + mutex_unlock(&nvmem_mutex); + + if (!try_module_get(nvmem->owner)) { + dev_err(&nvmem->dev, + "could not increase module refcount for cell %s\n", + nvmem->name); + + mutex_lock(&nvmem_mutex); + nvmem->users--; + mutex_unlock(&nvmem_mutex); + + return ERR_PTR(-EINVAL); + } + + return nvmem; +} + +static void __nvmem_device_put(struct nvmem_device *nvmem) +{ + module_put(nvmem->owner); + mutex_lock(&nvmem_mutex); + nvmem->users--; + mutex_unlock(&nvmem_mutex); +} + +static int nvmem_match(struct device *dev, void *data) +{ + return !strcmp(dev_name(dev), data); +} + +static struct nvmem_device *nvmem_find(const char *name) +{ + struct device *d; + + d = bus_find_device(&nvmem_bus_type, NULL, (void *)name, nvmem_match); + + if (!d) + return NULL; + + return to_nvmem_device(d); +} + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +/** + * of_nvmem_device_get() - Get nvmem device from a given id + * + * @dev node: Device tree node that uses the nvmem device + * @id: nvmem name from nvmem-names property. + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device + * on success. + */ +struct nvmem_device *of_nvmem_device_get(struct device_node *np, const char *id) +{ + + struct device_node *nvmem_np; + int index; + + index = of_property_match_string(np, "nvmem-names", id); + + nvmem_np = of_parse_phandle(np, "nvmem", index); + if (!nvmem_np) + return ERR_PTR(-EINVAL); + + return __nvmem_device_get(nvmem_np, NULL, NULL); +} +EXPORT_SYMBOL_GPL(of_nvmem_device_get); +#endif + +/** + * nvmem_device_get() - Get nvmem device from a given id + * + * @dev : Device that uses the nvmem device + * @id: nvmem name from nvmem-names property. + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device + * on success. + */ +struct nvmem_device *nvmem_device_get(struct device *dev, const char *dev_name) +{ + if (dev->of_node) { /* try dt first */ + struct nvmem_device *nvmem; + + nvmem = of_nvmem_device_get(dev->of_node, dev_name); + + if (!IS_ERR(nvmem) || PTR_ERR(nvmem) == -EPROBE_DEFER) + return nvmem; + + } + + return nvmem_find(dev_name); +} +EXPORT_SYMBOL_GPL(nvmem_device_get); + +static int devm_nvmem_device_match(struct device *dev, void *res, void *data) +{ + struct nvmem_device **nvmem = res; + + if (WARN_ON(!nvmem || !*nvmem)) + return 0; + + return *nvmem == data; +} + +static void devm_nvmem_device_release(struct device *dev, void *res) +{ + nvmem_device_put(*(struct nvmem_device **)res); +} + +/** + * devm_nvmem_device_put() - put alredy got nvmem device + * + * @nvmem: pointer to nvmem device allocated by devm_nvmem_cell_get(), + * that needs to be released. + */ +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem) +{ + int ret; + + ret = devres_release(dev, devm_nvmem_device_release, + devm_nvmem_device_match, nvmem); + + WARN_ON(ret); +} +EXPORT_SYMBOL_GPL(devm_nvmem_device_put); + +/** + * nvmem_device_put() - put alredy got nvmem device + * + * @nvmem: pointer to nvmem device that needs to be released. + */ +void nvmem_device_put(struct nvmem_device *nvmem) +{ + __nvmem_device_put(nvmem); +} +EXPORT_SYMBOL_GPL(nvmem_device_put); + +/** + * devm_nvmem_device_get() - Get nvmem cell of device form a given id + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem name in nvmems property. + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_cell + * on success. The nvmem_cell will be freed by the automatically once the + * device is freed. + */ +struct nvmem_device *devm_nvmem_device_get(struct device *dev, const char *id) +{ + struct nvmem_device **ptr, *nvmem; + + ptr = devres_alloc(devm_nvmem_device_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + nvmem = nvmem_device_get(dev, id); + if (!IS_ERR(nvmem)) { + *ptr = nvmem; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return nvmem; +} +EXPORT_SYMBOL_GPL(devm_nvmem_device_get); + +static struct nvmem_cell *nvmem_cell_get_from_list(const char *cell_id) +{ + struct nvmem_cell *cell = NULL; + struct nvmem_device *nvmem; + + nvmem = __nvmem_device_get(NULL, &cell, cell_id); + if (IS_ERR(nvmem)) + return ERR_CAST(nvmem); + + return cell; +} + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +/** + * of_nvmem_cell_get() - Get a nvmem cell from given device node and cell id + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem cell name from nvmem-cell-names property. + * + * Return: Will be an ERR_PTR() on error or a valid pointer + * to a struct nvmem_cell. The nvmem_cell will be freed by the + * nvmem_cell_put(). + */ +struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name) +{ + struct device_node *cell_np, *nvmem_np; + struct nvmem_cell *cell; + struct nvmem_device *nvmem; + const __be32 *addr; + int rval, len, index; + + index = of_property_match_string(np, "nvmem-cell-names", name); + + cell_np = of_parse_phandle(np, "nvmem-cells", index); + if (!cell_np) + return ERR_PTR(-EINVAL); + + nvmem_np = of_get_next_parent(cell_np); + if (!nvmem_np) + return ERR_PTR(-EINVAL); + + nvmem = __nvmem_device_get(nvmem_np, NULL, NULL); + if (IS_ERR(nvmem)) + return ERR_CAST(nvmem); + + addr = of_get_property(cell_np, "reg", &len); + if (!addr || (len < 2 * sizeof(int))) { + dev_err(&nvmem->dev, "nvmem: invalid reg on %s\n", + cell_np->full_name); + rval = -EINVAL; + goto err_mem; + } + + cell = kzalloc(sizeof(*cell), GFP_KERNEL); + if (!cell) { + rval = -ENOMEM; + goto err_mem; + } + + cell->nvmem = nvmem; + cell->offset = be32_to_cpup(addr++); + cell->bytes = be32_to_cpup(addr); + cell->name = cell_np->name; + + addr = of_get_property(cell_np, "bits", &len); + if (addr && len == (2 * sizeof(int))) { + cell->bit_offset = be32_to_cpup(addr++); + cell->nbits = be32_to_cpup(addr); + } + + if (cell->nbits) + cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset, + BITS_PER_BYTE); + + if (!IS_ALIGNED(cell->offset, nvmem->stride)) { + dev_err(&nvmem->dev, + "cell %s unaligned to nvmem stride %d\n", + cell->name, nvmem->stride); + rval = -EINVAL; + goto err_sanity; + } + + nvmem_cell_add(cell); + + return cell; + +err_sanity: + kfree(cell); + +err_mem: + __nvmem_device_put(nvmem); + + return ERR_PTR(rval); +} +EXPORT_SYMBOL_GPL(of_nvmem_cell_get); +#endif + +/** + * nvmem_cell_get() - Get nvmem cell of device form a given cell name + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem cell name to get. + * + * Return: Will be an ERR_PTR() on error or a valid pointer + * to a struct nvmem_cell. The nvmem_cell will be freed by the + * nvmem_cell_put(). + */ +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *cell_id) +{ + struct nvmem_cell *cell; + + if (dev->of_node) { /* try dt first */ + cell = of_nvmem_cell_get(dev->of_node, cell_id); + if (!IS_ERR(cell) || PTR_ERR(cell) == -EPROBE_DEFER) + return cell; + } + + return nvmem_cell_get_from_list(cell_id); +} +EXPORT_SYMBOL_GPL(nvmem_cell_get); + +static void devm_nvmem_cell_release(struct device *dev, void *res) +{ + nvmem_cell_put(*(struct nvmem_cell **)res); +} + +/** + * devm_nvmem_cell_get() - Get nvmem cell of device form a given id + * + * @dev node: Device tree node that uses the nvmem cell + * @id: nvmem id in nvmem-names property. + * + * Return: Will be an ERR_PTR() on error or a valid pointer + * to a struct nvmem_cell. The nvmem_cell will be freed by the + * automatically once the device is freed. + */ +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *id) +{ + struct nvmem_cell **ptr, *cell; + + ptr = devres_alloc(devm_nvmem_cell_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + cell = nvmem_cell_get(dev, id); + if (!IS_ERR(cell)) { + *ptr = cell; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return cell; +} +EXPORT_SYMBOL_GPL(devm_nvmem_cell_get); + +static int devm_nvmem_cell_match(struct device *dev, void *res, void *data) +{ + struct nvmem_cell **c = res; + + if (WARN_ON(!c || !*c)) + return 0; + + return *c == data; +} + +/** + * devm_nvmem_cell_put() - Release previously allocated nvmem cell + * from devm_nvmem_cell_get. + * + * @cell: Previously allocated nvmem cell by devm_nvmem_cell_get() + */ +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell) +{ + int ret; + + ret = devres_release(dev, devm_nvmem_cell_release, + devm_nvmem_cell_match, cell); + + WARN_ON(ret); +} +EXPORT_SYMBOL(devm_nvmem_cell_put); + +/** + * nvmem_cell_put() - Release previously allocated nvmem cell. + * + * @cell: Previously allocated nvmem cell by nvmem_cell_get() + */ +void nvmem_cell_put(struct nvmem_cell *cell) +{ + struct nvmem_device *nvmem = cell->nvmem; + + __nvmem_device_put(nvmem); + nvmem_cell_drop(cell); +} +EXPORT_SYMBOL_GPL(nvmem_cell_put); + +static inline void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell, + void *buf) +{ + u8 *p, *b; + int i, bit_offset = cell->bit_offset; + + p = b = buf; + if (bit_offset) { + /* First shift */ + *b++ >>= bit_offset; + + /* setup rest of the bytes if any */ + for (i = 1; i < cell->bytes; i++) { + /* Get bits from next byte and shift them towards msb */ + *p |= *b << (BITS_PER_BYTE - bit_offset); + + p = b; + *b++ >>= bit_offset; + } + + /* result fits in less bytes */ + if (cell->bytes != DIV_ROUND_UP(cell->nbits, BITS_PER_BYTE)) + *p-- = 0; + } + /* clear msb bits if any leftover in the last byte */ + *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); +} + +static int __nvmem_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell *cell, + void *buf, size_t *len) +{ + int rc; + + rc = regmap_raw_read(nvmem->regmap, cell->offset, buf, cell->bytes); + + if (IS_ERR_VALUE(rc)) + return rc; + + /* shift bits in-place */ + if (cell->bit_offset || cell->bit_offset) + nvmem_shift_read_buffer_in_place(cell, buf); + + *len = cell->bytes; + + return 0; +} + +/** + * nvmem_cell_read() - Read a given nvmem cell + * + * @cell: nvmem cell to be read. + * @len: pointer to length of cell which will be populated on successful read. + * + * Return: ERR_PTR() on error or a valid pointer to a char * buffer on success. + * The buffer should be freed by the consumer with a kfree(). + */ +void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len) +{ + struct nvmem_device *nvmem = cell->nvmem; + u8 *buf; + int rc; + + if (!nvmem || !nvmem->regmap) + return ERR_PTR(-EINVAL); + + buf = kzalloc(cell->bytes, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + rc = __nvmem_cell_read(nvmem, cell, buf, len); + if (IS_ERR_VALUE(rc)) { + kfree(buf); + return ERR_PTR(rc); + } + + return buf; +} +EXPORT_SYMBOL_GPL(nvmem_cell_read); + +static inline void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell, + u8 *_buf, int len) +{ + struct nvmem_device *nvmem = cell->nvmem; + int i, rc, nbits, bit_offset = cell->bit_offset; + u8 v, *p, *buf, *b, pbyte, pbits; + + nbits = cell->nbits; + buf = kzalloc(cell->bytes, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + memcpy(buf, _buf, len); + p = b = buf; + + if (bit_offset) { + pbyte = *b; + *b <<= bit_offset; + + /* setup the first byte with lsb bits from nvmem */ + rc = regmap_raw_read(nvmem->regmap, cell->offset, &v, 1); + *b++ |= GENMASK(bit_offset - 1, 0) & v; + + /* setup rest of the byte if any */ + for (i = 1; i < cell->bytes; i++) { + /* Get last byte bits and shift them towards lsb */ + pbits = pbyte >> (BITS_PER_BYTE - 1 - bit_offset); + pbyte = *b; + p = b; + *b <<= bit_offset; + *b++ |= pbits; + } + } + + /* if it's not end on byte boundary */ + if ((nbits + bit_offset) % BITS_PER_BYTE) { + /* setup the last byte with msb bits from nvmem */ + rc = regmap_raw_read(nvmem->regmap, + cell->offset + cell->bytes - 1, &v, 1); + *p |= GENMASK(7, (nbits + bit_offset) % BITS_PER_BYTE) & v; + + } + + return buf; +} + +/** + * nvmem_cell_write() - Write to a given nvmem cell + * + * @cell: nvmem cell to be written. + * @buf: Buffer to be written. + * @len: length of buffer to be written to nvmem cell. + * + * Return: length of bytes written or negative on failure. + */ +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len) +{ + struct nvmem_device *nvmem = cell->nvmem; + int rc; + + if (!nvmem || !nvmem->regmap || nvmem->read_only || + (cell->bit_offset == 0 && len != cell->bytes)) + return -EINVAL; + + if (cell->bit_offset || cell->nbits) { + buf = nvmem_cell_prepare_write_buffer(cell, buf, len); + if (IS_ERR(buf)) + return PTR_ERR(buf); + } + + rc = regmap_raw_write(nvmem->regmap, cell->offset, buf, cell->bytes); + + /* free the tmp buffer */ + if (cell->bit_offset) + kfree(buf); + + if (IS_ERR_VALUE(rc)) + return rc; + + return len; +} +EXPORT_SYMBOL_GPL(nvmem_cell_write); + +/** + * nvmem_device_cell_read() - Read a given nvmem device and cell + * + * @nvmem: nvmem device to read from. + * @info: nvmem cell info to be read. + * @buf: buffer pointer which will be populated on successful read. + * + * Return: length of successful bytes read on success and negative + * error code on error. + */ +ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf) +{ + struct nvmem_cell cell; + int rc; + ssize_t len; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = nvmem_cell_info_to_nvmem_cell(nvmem, info, &cell); + if (IS_ERR_VALUE(rc)) + return rc; + + rc = __nvmem_cell_read(nvmem, &cell, buf, &len); + if (IS_ERR_VALUE(rc)) + return rc; + + return len; +} +EXPORT_SYMBOL_GPL(nvmem_device_cell_read); + +/** + * nvmem_device_cell_write() - Write cell to a given nvmem device + * + * @nvmem: nvmem device to be written to. + * @info: nvmem cell info to be written + * @buf: buffer to be written to cell. + * + * Return: length of bytes written or negative error code on failure. + * */ +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf) +{ + struct nvmem_cell cell; + int rc; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = nvmem_cell_info_to_nvmem_cell(nvmem, info, &cell); + if (IS_ERR_VALUE(rc)) + return rc; + + return nvmem_cell_write(&cell, buf, cell.bytes); +} +EXPORT_SYMBOL_GPL(nvmem_device_cell_write); + +/** + * nvmem_device_read() - Read from a given nvmem device + * + * @nvmem: nvmem device to read from. + * @offset: offset in nvmem device. + * @bytes: number of bytes to read. + * @buf: buffer pointer which will be populated on successful read. + * + * Return: length of successful bytes read on success and negative + * error code on error. + */ +int nvmem_device_read(struct nvmem_device *nvmem, + unsigned int offset, + size_t bytes, void *buf) +{ + int rc; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = regmap_raw_read(nvmem->regmap, offset, buf, bytes); + + if (IS_ERR_VALUE(rc)) + return rc; + + return bytes; +} +EXPORT_SYMBOL_GPL(nvmem_device_read); + +/** + * nvmem_device_write() - Write cell to a given nvmem device + * + * @nvmem: nvmem device to be written to. + * @offset: offset in nvmem device. + * @bytes: number of bytes to write. + * @buf: buffer to be written. + * + * Return: length of bytes written or negative error code on failure. + * */ +int nvmem_device_write(struct nvmem_device *nvmem, + unsigned int offset, + size_t bytes, void *buf) +{ + int rc; + + if (!nvmem || !nvmem->regmap) + return -EINVAL; + + rc = regmap_raw_write(nvmem->regmap, offset, buf, bytes); + + if (IS_ERR_VALUE(rc)) + return rc; + + + return bytes; +} +EXPORT_SYMBOL_GPL(nvmem_device_write); + +static int __init nvmem_init(void) +{ + return bus_register(&nvmem_bus_type); +} + +static void __exit nvmem_exit(void) +{ + bus_unregister(&nvmem_bus_type); +} + +subsys_initcall(nvmem_init); +module_exit(nvmem_exit); + +MODULE_AUTHOR("Srinivas Kandagatla + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +static struct regmap_config qfprom_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .reg_stride = 1, +}; + +static struct nvmem_config econfig = { + .name = "qfprom", + .owner = THIS_MODULE, +}; + +static int qfprom_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static int qfprom_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct nvmem_device *nvmem; + struct regmap *regmap; + void __iomem *base; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + qfprom_regmap_config.max_register = resource_size(res) - 1; + + regmap = devm_regmap_init_mmio(dev, base, &qfprom_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + econfig.dev = dev; + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static const struct of_device_id qfprom_of_match[] = { + { .compatible = "qcom,qfprom",}, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, qfprom_of_match); + +static struct platform_driver qfprom_driver = { + .probe = qfprom_probe, + .remove = qfprom_remove, + .driver = { + .name = "qcom,qfprom", + .of_match_table = qfprom_of_match, + }, +}; +module_platform_driver(qfprom_driver); +MODULE_AUTHOR("Srinivas Kandagatla "); +MODULE_DESCRIPTION("Qualcomm QFPROM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c new file mode 100644 index 0000000000000..169a82977742d --- /dev/null +++ b/drivers/nvmem/sunxi_sid.c @@ -0,0 +1,159 @@ +/* + * Allwinner sunXi SoCs Security ID support. + * + * Copyright (c) 2013 Oliver Schinagl + * Copyright (C) 2014 Maxime Ripard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + + +static struct nvmem_config econfig = { + .name = "sunxi-sid", + .read_only = true, + .owner = THIS_MODULE, +}; + +struct sunxi_sid { + void __iomem *base; +}; + +/* We read the entire key, due to a 32 bit read alignment requirement. Since we + * want to return the requested byte, this results in somewhat slower code and + * uses 4 times more reads as needed but keeps code simpler. Since the SID is + * only very rarely probed, this is not really an issue. + */ +static u8 sunxi_sid_read_byte(const struct sunxi_sid *sid, + const unsigned int offset) +{ + u32 sid_key; + + sid_key = ioread32be(sid->base + round_down(offset, 4)); + sid_key >>= (offset % 4) * 8; + + return sid_key; /* Only return the last byte */ +} + +static int sunxi_sid_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct sunxi_sid *sid = context; + unsigned int offset = *(u32 *)reg; + u8 *buf = val; + + while (val_size) { + *buf++ = sunxi_sid_read_byte(sid, offset); + val_size--; + offset++; + } + + return 0; +} + +static int sunxi_sid_write(void *context, const void *data, size_t count) +{ + /* Unimplemented, dummy to keep regmap core happy */ + return 0; +} + +static struct regmap_bus sunxi_sid_bus = { + .read = sunxi_sid_read, + .write = sunxi_sid_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static bool sunxi_sid_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static struct regmap_config sunxi_sid_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .reg_stride = 1, + .writeable_reg = sunxi_sid_writeable_reg, +}; + +static int sunxi_sid_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct nvmem_device *nvmem; + struct regmap *regmap; + struct sunxi_sid *sid; + + sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL); + if (!sid) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sid->base = devm_ioremap_resource(dev, res); + if (IS_ERR(sid->base)) + return PTR_ERR(sid->base); + + sunxi_sid_regmap_config.max_register = resource_size(res) - 1; + + regmap = devm_regmap_init(dev, &sunxi_sid_bus, sid, + &sunxi_sid_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + econfig.dev = dev; + nvmem = nvmem_register(&econfig); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + platform_set_drvdata(pdev, nvmem); + + return 0; +} + +static int sunxi_sid_remove(struct platform_device *pdev) +{ + struct nvmem_device *nvmem = platform_get_drvdata(pdev); + + return nvmem_unregister(nvmem); +} + +static const struct of_device_id sunxi_sid_of_match[] = { + { .compatible = "allwinner,sun4i-a10-sid" }, + { .compatible = "allwinner,sun7i-a20-sid" }, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); + +static struct platform_driver sunxi_sid_driver = { + .probe = sunxi_sid_probe, + .remove = sunxi_sid_remove, + .driver = { + .name = "eeprom-sunxi-sid", + .of_match_table = sunxi_sid_of_match, + }, +}; +module_platform_driver(sunxi_sid_driver); + +MODULE_AUTHOR("Oliver Schinagl "); +MODULE_DESCRIPTION("Allwinner sunxi security id driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 07bb3c8f191be..40f2dde8882bb 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -97,4 +97,12 @@ config OF_OVERLAY While this option is selected automatically when needed, you can enable it manually to improve device tree unit test coverage. +config OF_CONFIGFS + bool "Device Tree Overlay ConfigFS interface" + select CONFIGFS_FS + select OF_OVERLAY + select OF_FLATTREE + help + Enable a simple user-space driven DT overlay interface. + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index fcacb186a67be..b5df4a2258db2 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -1,4 +1,5 @@ obj-y = base.o device.o platform.o +obj-$(CONFIG_OF_CONFIGFS) += configfs.o obj-$(CONFIG_OF_DYNAMIC) += dynamic.o obj-$(CONFIG_OF_FLATTREE) += fdt.o obj-$(CONFIG_OF_EARLY_FLATTREE) += fdt_address.o diff --git a/drivers/of/base.c b/drivers/of/base.c index f0650265febf9..31a4883ae101d 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -192,6 +192,7 @@ int __of_attach_node_sysfs(struct device_node *np) void __init of_core_init(void) { struct device_node *np; + int ret; /* Create the kset, and register existing nodes */ mutex_lock(&of_mutex); @@ -208,6 +209,12 @@ void __init of_core_init(void) /* Symlink in /proc as required by userspace ABI */ if (of_root) proc_symlink("device-tree", NULL, "/sys/firmware/devicetree/base"); + + ret = of_overlay_init(); + if (ret != 0) + pr_warn("of_init: of_overlay_init failed!\n"); + + return 0; } static struct property *__of_find_property(const struct device_node *np, diff --git a/drivers/of/configfs.c b/drivers/of/configfs.c new file mode 100644 index 0000000000000..9fb1b35825c8f --- /dev/null +++ b/drivers/of/configfs.c @@ -0,0 +1,333 @@ +/* + * Configfs entries for device-tree + * + * Copyright (C) 2013 - Pantelis Antoniou + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "of_private.h" + +struct cfs_overlay_item { + struct config_item item; + + char path[PATH_MAX]; + + const struct firmware *fw; + struct device_node *overlay; + int ov_id; + + void *dtbo; + int dtbo_size; +}; + +static int create_overlay(struct cfs_overlay_item *overlay, void *blob) +{ + int err; + + /* unflatten the tree */ + of_fdt_unflatten_tree(blob, &overlay->overlay); + if (overlay->overlay == NULL) { + pr_err("%s: failed to unflatten tree\n", __func__); + err = -EINVAL; + goto out_err; + } + pr_debug("%s: unflattened OK\n", __func__); + + /* mark it as detached */ + of_node_set_flag(overlay->overlay, OF_DETACHED); + + /* perform resolution */ + err = of_resolve_phandles(overlay->overlay); + if (err != 0) { + pr_err("%s: Failed to resolve tree\n", __func__); + goto out_err; + } + pr_debug("%s: resolved OK\n", __func__); + + err = of_overlay_create(overlay->overlay); + if (err < 0) { + pr_err("%s: Failed to create overlay (err=%d)\n", + __func__, err); + goto out_err; + } + overlay->ov_id = err; + +out_err: + return err; +} + +static inline struct cfs_overlay_item *to_cfs_overlay_item( + struct config_item *item) +{ + return item ? container_of(item, struct cfs_overlay_item, item) : NULL; +} + +CONFIGFS_ATTR_STRUCT(cfs_overlay_item); +#define CFS_OVERLAY_ITEM_ATTR(_name, _mode, _show, _store) \ +struct cfs_overlay_item_attribute cfs_overlay_item_attr_##_name = \ + __CONFIGFS_ATTR(_name, _mode, _show, _store) +#define CFS_OVERLAY_ITEM_ATTR_RO(_name, _show) \ +struct cfs_overlay_item_attribute cfs_overlay_item_attr_##_name = \ + __CONFIGFS_ATTR_RO(_name, _show) + +CONFIGFS_BIN_ATTR_STRUCT(cfs_overlay_item); +#define CFS_OVERLAY_ITEM_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) \ +struct cfs_overlay_item_bin_attribute cfs_overlay_item_bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) +#define CFS_OVERLAY_ITEM_BIN_ATTR_RO(_name, _read, _priv, _max) \ +struct cfs_overlay_item_bin_attribute cfs_overlay_item_bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR_RO(_name, _read, _priv, _max) + +static ssize_t cfs_overlay_item_path_show(struct cfs_overlay_item *overlay, + char *page) +{ + return sprintf(page, "%s\n", overlay->path); +} + +static ssize_t cfs_overlay_item_path_store(struct cfs_overlay_item *overlay, + const char *page, size_t count) +{ + const char *p = page; + char *s; + int err; + + /* if it's set do not allow changes */ + if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) + return -EPERM; + + /* copy to path buffer (and make sure it's always zero terminated */ + count = snprintf(overlay->path, sizeof(overlay->path) - 1, "%s", p); + overlay->path[sizeof(overlay->path) - 1] = '\0'; + + /* strip trailing newlines */ + s = overlay->path + strlen(overlay->path); + while (s > overlay->path && *--s == '\n') + *s = '\0'; + + pr_debug("%s: path is '%s'\n", __func__, overlay->path); + + err = request_firmware(&overlay->fw, overlay->path, NULL); + if (err != 0) + goto out_err; + + err = create_overlay(overlay, (void *)overlay->fw->data); + if (err < 0) + goto out_err; + + return count; + +out_err: + + release_firmware(overlay->fw); + overlay->fw = NULL; + + overlay->path[0] = '\0'; + return err; +} + +static ssize_t cfs_overlay_item_status_show(struct cfs_overlay_item *overlay, + char *page) +{ + return sprintf(page, "%s\n", + overlay->ov_id >= 0 ? "applied" : "unapplied"); +} + +CFS_OVERLAY_ITEM_ATTR(path, S_IRUGO | S_IWUSR, + cfs_overlay_item_path_show, cfs_overlay_item_path_store); +CFS_OVERLAY_ITEM_ATTR_RO(status, cfs_overlay_item_status_show); + +static struct configfs_attribute *cfs_overlay_attrs[] = { + &cfs_overlay_item_attr_path.attr, + &cfs_overlay_item_attr_status.attr, + NULL, +}; + +ssize_t cfs_overlay_item_dtbo_read(struct cfs_overlay_item *overlay, + void *buf, size_t max_count) +{ + pr_debug("%s: buf=%p max_count=%u\n", __func__, + buf, max_count); + + if (overlay->dtbo == NULL) + return 0; + + /* copy if buffer provided */ + if (buf != NULL) { + /* the buffer must be large enough */ + if (overlay->dtbo_size > max_count) + return -ENOSPC; + + memcpy(buf, overlay->dtbo, overlay->dtbo_size); + } + + return overlay->dtbo_size; +} + +ssize_t cfs_overlay_item_dtbo_write(struct cfs_overlay_item *overlay, + const void *buf, size_t count) +{ + int err; + + /* if it's set do not allow changes */ + if (overlay->path[0] != '\0' || overlay->dtbo_size > 0) + return -EPERM; + + /* copy the contents */ + overlay->dtbo = kmemdup(buf, count, GFP_KERNEL); + if (overlay->dtbo == NULL) + return -ENOMEM; + + overlay->dtbo_size = count; + + err = create_overlay(overlay, overlay->dtbo); + if (err < 0) + goto out_err; + + return count; + +out_err: + kfree(overlay->dtbo); + overlay->dtbo = NULL; + overlay->dtbo_size = 0; + + return err; +} + +CFS_OVERLAY_ITEM_BIN_ATTR(dtbo, S_IRUGO | S_IWUSR, + cfs_overlay_item_dtbo_read, cfs_overlay_item_dtbo_write, + NULL, SZ_1M); + +static struct configfs_bin_attribute *cfs_overlay_bin_attrs[] = { + &cfs_overlay_item_bin_attr_dtbo.bin_attr, + NULL, +}; + +static void cfs_overlay_release(struct config_item *item) +{ + struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); + + if (overlay->ov_id >= 0) + of_overlay_destroy(overlay->ov_id); + if (overlay->fw) + release_firmware(overlay->fw); + /* kfree with NULL is safe */ + kfree(overlay->dtbo); + kfree(overlay); +} + +CONFIGFS_ATTR_OPS(cfs_overlay_item); +CONFIGFS_BIN_ATTR_OPS(cfs_overlay_item); +static struct configfs_item_operations cfs_overlay_item_ops = { + .release = cfs_overlay_release, + .show_attribute = cfs_overlay_item_attr_show, + .store_attribute = cfs_overlay_item_attr_store, + .read_bin_attribute = cfs_overlay_item_bin_attr_read, + .write_bin_attribute = cfs_overlay_item_bin_attr_write, +}; + +static struct config_item_type cfs_overlay_type = { + .ct_item_ops = &cfs_overlay_item_ops, + .ct_attrs = cfs_overlay_attrs, + .ct_bin_attrs = cfs_overlay_bin_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct config_item *cfs_overlay_group_make_item( + struct config_group *group, const char *name) +{ + struct cfs_overlay_item *overlay; + + overlay = kzalloc(sizeof(*overlay), GFP_KERNEL); + if (!overlay) + return ERR_PTR(-ENOMEM); + overlay->ov_id = -1; + + config_item_init_type_name(&overlay->item, name, &cfs_overlay_type); + return &overlay->item; +} + +static void cfs_overlay_group_drop_item(struct config_group *group, + struct config_item *item) +{ + struct cfs_overlay_item *overlay = to_cfs_overlay_item(item); + + config_item_put(&overlay->item); +} + +static struct configfs_group_operations overlays_ops = { + .make_item = cfs_overlay_group_make_item, + .drop_item = cfs_overlay_group_drop_item, +}; + +static struct config_item_type overlays_type = { + .ct_group_ops = &overlays_ops, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_group_operations of_cfs_ops = { + /* empty - we don't allow anything to be created */ +}; + +static struct config_item_type of_cfs_type = { + .ct_group_ops = &of_cfs_ops, + .ct_owner = THIS_MODULE, +}; + +struct config_group of_cfs_overlay_group; + +struct config_group *of_cfs_def_groups[] = { + &of_cfs_overlay_group, + NULL +}; + +static struct configfs_subsystem of_cfs_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "device-tree", + .ci_type = &of_cfs_type, + }, + .default_groups = of_cfs_def_groups, + }, + .su_mutex = __MUTEX_INITIALIZER(of_cfs_subsys.su_mutex), +}; + +static int __init of_cfs_init(void) +{ + int ret; + + pr_info("%s\n", __func__); + + config_group_init(&of_cfs_subsys.su_group); + config_group_init_type_name(&of_cfs_overlay_group, "overlays", + &overlays_type); + + ret = configfs_register_subsystem(&of_cfs_subsys); + if (ret != 0) { + pr_err("%s: failed to register subsys\n", __func__); + goto out; + } + pr_info("%s: OK\n", __func__); +out: + return ret; +} +late_initcall(of_cfs_init); diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c index 53826b84e0ec6..afa8e31b08773 100644 --- a/drivers/of/dynamic.c +++ b/drivers/of/dynamic.c @@ -394,8 +394,9 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags) } /** - * __of_node_dup() - Duplicate or create an empty device node dynamically. - * @fmt: Format string (plus vargs) for new full name of the device node + * __of_node_dupv() - Duplicate or create an empty device node dynamically. + * @fmt: Format string for new full name of the device node + * @vargs: va_list containing the arugments for the node full name * * Create an device tree node, either by duplicating an empty node or by allocating * an empty one suitable for further modification. The node data are @@ -403,17 +404,15 @@ struct property *__of_prop_dup(const struct property *prop, gfp_t allocflags) * OF_DETACHED bits set. Returns the newly allocated node or NULL on out of * memory error. */ -struct device_node *__of_node_dup(const struct device_node *np, const char *fmt, ...) +struct device_node *__of_node_dupv(const struct device_node *np, + const char *fmt, va_list vargs) { - va_list vargs; struct device_node *node; node = kzalloc(sizeof(*node), GFP_KERNEL); if (!node) return NULL; - va_start(vargs, fmt); node->full_name = kvasprintf(GFP_KERNEL, fmt, vargs); - va_end(vargs); if (!node->full_name) { kfree(node); return NULL; @@ -445,6 +444,24 @@ struct device_node *__of_node_dup(const struct device_node *np, const char *fmt, return NULL; } +/** + * __of_node_dup() - Duplicate or create an empty device node dynamically. + * @fmt: Format string (plus vargs) for new full name of the device node + * + * See: __of_node_dupv() + */ +struct device_node *__of_node_dup(const struct device_node *np, + const char *fmt, ...) +{ + va_list vargs; + struct device_node *node; + + va_start(vargs, fmt); + node = __of_node_dupv(np, fmt, vargs); + va_end(vargs); + return node; +} + static void __of_changeset_entry_destroy(struct of_changeset_entry *ce) { of_node_put(ce->np); @@ -779,3 +796,254 @@ int of_changeset_action(struct of_changeset *ocs, unsigned long action, list_add_tail(&ce->node, &ocs->entries); return 0; } + +/* changeset helpers */ + +/** + * of_changeset_create_device_node - Create an empty device node + * + * @ocs: changeset pointer + * @parent: parent device node + * @fmt: format string for the node's full_name + * @args: argument list for the format string + * + * Create an empty device node, marking it as detached and allocated. + * + * Returns a device node on success, an error encoded pointer otherwise + */ +struct device_node *of_changeset_create_device_nodev( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, va_list vargs) +{ + struct device_node *node; + + node = __of_node_dupv(NULL, fmt, vargs); + if (!node) + return ERR_PTR(-ENOMEM); + + node->parent = parent; + return node; +} + +/** + * of_changeset_create_device_node - Create an empty device node + * + * @ocs: changeset pointer + * @parent: parent device node + * @fmt: Format string for the node's full_name + * ... Arguments + * + * Create an empty device node, marking it as detached and allocated. + * + * Returns a device node on success, an error encoded pointer otherwise + */ +struct device_node *of_changeset_create_device_node( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, ...) +{ + va_list vargs; + struct device_node *node; + + va_start(vargs, fmt); + node = of_changeset_create_device_nodev(ocs, parent, fmt, vargs); + va_end(vargs); + return node; +} + +/** + * of_changeset_add_property_copy - Create a new property copying name & value + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @value: pointer to the value data + * @length: length of the value in bytes + * + * Adds a property to the changeset by making copies of the name & value + * entries. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_copy(struct of_changeset *ocs, + struct device_node *np, const char *name, const void *value, + int length) +{ + struct property *prop; + char *new_name; + void *new_value; + int ret; + + ret = -ENOMEM; + + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + if (!prop) + goto out_no_prop; + + new_name = kstrdup(name, GFP_KERNEL); + if (!new_name) + goto out_no_name; + + /* + * NOTE: There is no check for zero length value. + * In case of a boolean property, this will allocate a value + * of zero bytes. We do this to work around the use + * of of_get_property() calls on boolean values. + */ + new_value = kmemdup(value, length, GFP_KERNEL); + if (!new_value) + goto out_no_value; + + of_property_set_flag(prop, OF_DYNAMIC); + + prop->name = new_name; + prop->value = new_value; + prop->length = length; + + ret = of_changeset_add_property(ocs, np, prop); + if (ret != 0) + goto out_no_add; + + return 0; + +out_no_add: + kfree(prop->value); +out_no_value: + kfree(prop->name); +out_no_name: + kfree(prop); +out_no_prop: + return ret; +} + +/** + * of_changeset_add_property_string - Create a new string property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @str: string property + * + * Adds a string property to the changeset by making copies of the name + * and the string value. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_string(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *str) +{ + return of_changeset_add_property_copy(ocs, np, name, str, + strlen(str) + 1); +} + +/** + * of_changeset_add_property_stringf - Create a new formatted string property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @fmt: format of string property + * ... arguments of the format string + * + * Adds a string property to the changeset by making copies of the name + * and the formatted value. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_stringf(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *fmt, ...) +{ + va_list vargs; + char *str; + int ret; + + va_start(vargs, fmt); + str = kvasprintf(GFP_KERNEL, fmt, vargs); + va_end(vargs); + + ret = of_changeset_add_property_string(ocs, np, name, str); + + kfree(str); + return ret; +} + +/** + * of_changeset_add_property_string_list - Create a new string list property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @strs: pointer to the string list + * @count: string count + * + * Adds a string list property to the changeset. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_string_list(struct of_changeset *ocs, + struct device_node *np, const char *name, const char **strs, + int count) +{ + int total, length, i, ret; + char *value, *s; + + total = 0; + for (i = 0; i < count; i++) { + length = strlen(strs[i]); + total += length + 1; + } + + value = kmalloc(total, GFP_KERNEL); + if (!value) + return -ENOMEM; + + for (i = 0, s = value; i < count; i++) { + length = strlen(strs[i]); + memcpy(s, strs[i], length + 1); + s += length + 1; + } + + ret = of_changeset_add_property_copy(ocs, np, name, value, total); + + kfree(value); + + return ret; +} + +/** + * of_changeset_add_property_u32 - Create a new u32 property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * @val: value in host endian format + * + * Adds a u32 property to the changeset. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_u32(struct of_changeset *ocs, + struct device_node *np, const char *name, u32 val) +{ + /* in place */ + val = cpu_to_be32(val); + return of_changeset_add_property_copy(ocs, np, name, &val, sizeof(val)); +} + +/** + * of_changeset_add_property_bool - Create a new u32 property + * + * @ocs: changeset pointer + * @np: device node pointer + * @name: name of the property + * + * Adds a bool property to the changeset. Note that there is + * no option to set the value to false, since the property + * existing sets it to true. + * + * Returns zero on success, a negative error value otherwise. + */ +int of_changeset_add_property_bool(struct of_changeset *ocs, + struct device_node *np, const char *name) +{ + return of_changeset_add_property_copy(ocs, np, name, "", 0); +} diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index 8e882e706cd8c..120eb44a7f774 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -90,4 +90,13 @@ extern void __of_detach_node_sysfs(struct device_node *np); #define for_each_transaction_entry_reverse(_oft, _te) \ list_for_each_entry_reverse(_te, &(_oft)->te_list, node) +#if defined(CONFIG_OF_OVERLAY) +extern int of_overlay_init(void); +#else +static inline int of_overlay_init(void) +{ + return 0; +} +#endif + #endif /* _LINUX_OF_PRIVATE_H */ diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index dee9270ba5471..f9b55d1bb6d79 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include "of_private.h" @@ -51,10 +53,17 @@ struct of_overlay { int count; struct of_overlay_info *ovinfo_tab; struct of_changeset cset; + struct kobject kobj; + char *indirect_id; + struct device_node *target_root; }; +/* master enable switch; once set to 0 can't be re-enabled */ +static atomic_t ov_enable = ATOMIC_INIT(1); + static int of_overlay_apply_one(struct of_overlay *ov, struct device_node *target, const struct device_node *overlay); +static int overlay_removal_is_ok(struct of_overlay *ov); static int of_overlay_apply_single_property(struct of_overlay *ov, struct device_node *target, struct property *prop) @@ -184,33 +193,139 @@ static int of_overlay_apply(struct of_overlay *ov) return 0; } -/* - * Find the target node using a number of different strategies - * in order of preference - * - * "target" property containing the phandle of the target - * "target-path" property containing the path of the target - */ -static struct device_node *find_target_node(struct device_node *info_node) +static struct device_node *find_target_node_direct(struct of_overlay *ov, + struct device_node *info_node) { + struct device_node *target = NULL, *np; const char *path; + char *newpath; u32 val; int ret; /* first try to go by using the target as a phandle */ ret = of_property_read_u32(info_node, "target", &val); - if (ret == 0) - return of_find_node_by_phandle(val); + if (ret == 0) { + target = of_find_node_by_phandle(val); + if (!target) { + pr_err("%s: Could not find target phandle 0x%x\n", + __func__, val); + return NULL; + } + goto check_root; + } - /* now try to locate by path */ + /* failed, try to locate by path */ ret = of_property_read_string(info_node, "target-path", &path); - if (ret == 0) - return of_find_node_by_path(path); + if (ret == 0) { + + if (!ov->target_root) { + target = of_find_node_by_path(path); + if (!target) + pr_err("%s: Could not find target path \"%s\"\n", + __func__, path); + return target; + } - pr_err("%s: Failed to find target for node %p (%s)\n", __func__, - info_node, info_node->name); + /* remove preceding '/' from path; relative path */ + if (*path == '/') { + while (*path == '/') + path++; + + newpath = kasprintf(GFP_KERNEL, "%s%s%s", + of_node_full_name(ov->target_root), + *path ? "/" : "", path); + if (!newpath) { + pr_err("%s: Could not allocate \"%s%s%s\"\n", + __func__, + of_node_full_name(ov->target_root), + *path ? "/" : "", path); + return NULL; + } + target = of_find_node_by_path(newpath); + kfree(newpath); + + return target; + + } + /* target is an alias, need to check */ + target = of_find_node_by_path(path); + if (!target) { + pr_err("%s: Could not find alias \"%s\"\n", + __func__, path); + return NULL; + } + goto check_root; + } return NULL; + +check_root: + if (!ov->target_root) + return target; + + /* got a target, but we have to check it's under target root */ + for (np = target; np; np = np->parent) { + if (np == ov->target_root) + return target; + } + pr_err("%s: target \"%s\" not under target_root \"%s\"\n", + __func__, of_node_full_name(target), + of_node_full_name(ov->target_root)); + /* target is not under target_root */ + of_node_put(target); + return NULL; +} + +/* + * Find the target node using a number of different strategies + * in order of preference. Respects the indirect id if available. + * + * "target" property containing the phandle of the target + * "target-path" property containing the path of the target + */ +static struct device_node *find_target_node(struct of_overlay *ov, + struct device_node *info_node) +{ + struct device_node *target; + struct device_node *target_indirect; + struct device_node *indirect; + + /* try direct target */ + target = find_target_node_direct(ov, info_node); + if (target) + return target; + + /* try indirect if there */ + if (!ov->indirect_id) + return NULL; + + target_indirect = of_get_child_by_name(info_node, "target-indirect"); + if (!target_indirect) { + pr_err("%s: Failed to find target-indirect node at %s\n", + __func__, + of_node_full_name(info_node)); + return NULL; + } + + indirect = of_get_child_by_name(target_indirect, ov->indirect_id); + of_node_put(target_indirect); + if (!indirect) { + pr_err("%s: Failed to find indirect child node \"%s\" at %s\n", + __func__, ov->indirect_id, + of_node_full_name(info_node)); + return NULL; + } + + target = find_target_node_direct(ov, indirect); + + if (!target) { + pr_err("%s: Failed to find target for \"%s\" at %s\n", + __func__, ov->indirect_id, + of_node_full_name(indirect)); + } + of_node_put(indirect); + + return target; } /** @@ -234,7 +349,7 @@ static int of_fill_overlay_info(struct of_overlay *ov, if (ovinfo->overlay == NULL) goto err_fail; - ovinfo->target = find_target_node(info_node); + ovinfo->target = find_target_node(ov, info_node); if (ovinfo->target == NULL) goto err_fail; @@ -325,31 +440,140 @@ static int of_free_overlay_info(struct of_overlay *ov) static LIST_HEAD(ov_list); static DEFINE_IDR(ov_idr); -/** - * of_overlay_create() - Create and apply an overlay - * @tree: Device node containing all the overlays - * - * Creates and applies an overlay while also keeping track - * of the overlay in a list. This list can be used to prevent - * illegal overlay removals. - * - * Returns the id of the created overlay, or an negative error number - */ -int of_overlay_create(struct device_node *tree) +static inline struct of_overlay *kobj_to_overlay(struct kobject *kobj) +{ + return container_of(kobj, struct of_overlay, kobj); +} + +void of_overlay_release(struct kobject *kobj) +{ + struct of_overlay *ov = kobj_to_overlay(kobj); + + of_node_put(ov->target_root); + kfree(ov->indirect_id); + kfree(ov); +} + +static ssize_t enable_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&ov_enable)); +} + +static ssize_t enable_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, size_t count) +{ + int ret; + bool new_enable; + + ret = strtobool(buf, &new_enable); + if (ret != 0) + return ret; + /* if we've disabled it, no going back */ + if (atomic_read(&ov_enable) == 0) + return -EPERM; + atomic_set(&ov_enable, (int)new_enable); + return count; +} + +static struct kobj_attribute enable_attr = __ATTR_RW(enable); + +static const struct attribute *overlay_global_attrs[] = { + &enable_attr.attr, + NULL +}; + +static ssize_t can_remove_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + struct of_overlay *ov = kobj_to_overlay(kobj); + + return snprintf(buf, PAGE_SIZE, "%d\n", overlay_removal_is_ok(ov)); +} + +static ssize_t targets_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + struct of_overlay *ov = kobj_to_overlay(kobj); + struct of_overlay_info *ovinfo; + char *s, *e; + ssize_t ret; + int i, len; + + s = buf; + e = buf + PAGE_SIZE; + + mutex_lock(&of_mutex); + + /* targets */ + for (i = 0; i < ov->count; i++) { + ovinfo = &ov->ovinfo_tab[i]; + + len = snprintf(s, e - s, "%s\n", + of_node_full_name(ovinfo->target)); + if (len == 0) { + ret = -ENOSPC; + goto err; + } + s += len; + } + + /* the buffer is zero terminated */ + ret = s - buf; +err: + mutex_unlock(&of_mutex); + return ret; +} + +static struct kobj_attribute can_remove_attr = __ATTR_RO(can_remove); +static struct kobj_attribute targets_attr = __ATTR_RO(targets); + +static struct attribute *overlay_attrs[] = { + &can_remove_attr.attr, + &targets_attr.attr, + NULL +}; + +static struct kobj_type of_overlay_ktype = { + .release = of_overlay_release, + .sysfs_ops = &kobj_sysfs_ops, /* default kobj sysfs ops */ + .default_attrs = overlay_attrs, +}; + +static struct kset *ov_kset; + +static int __of_overlay_create(struct device_node *tree, + const char *indirect_id, struct device_node *target_root) { struct of_overlay *ov; int err, id; + /* administratively disabled */ + if (!atomic_read(&ov_enable)) + return -EPERM; + /* allocate the overlay structure */ ov = kzalloc(sizeof(*ov), GFP_KERNEL); if (ov == NULL) return -ENOMEM; ov->id = -1; + if (indirect_id) { + ov->indirect_id = kstrdup(indirect_id, GFP_KERNEL); + if (!ov->indirect_id) { + err = -ENOMEM; + goto err_no_mem; + } + } + ov->target_root = of_node_get(target_root); + INIT_LIST_HEAD(&ov->node); of_changeset_init(&ov->cset); + /* initialize kobject */ + kobject_init(&ov->kobj, &of_overlay_ktype); + mutex_lock(&of_mutex); id = idr_alloc(&ov_idr, ov, 0, 0, GFP_KERNEL); @@ -385,6 +609,14 @@ int of_overlay_create(struct device_node *tree) goto err_revert_overlay; } + ov->kobj.kset = ov_kset; + err = kobject_add(&ov->kobj, NULL, "%d", id); + if (err != 0) { + pr_err("%s: kobject_add() failed for tree@%s\n", + __func__, tree->full_name); + goto err_cancel_overlay; + } + /* add to the tail of the overlay list */ list_add_tail(&ov->node, &ov_list); @@ -392,6 +624,8 @@ int of_overlay_create(struct device_node *tree) return id; +err_cancel_overlay: + of_changeset_revert(&ov->cset); err_revert_overlay: err_abort_trans: of_free_overlay_info(ov); @@ -399,13 +633,68 @@ int of_overlay_create(struct device_node *tree) idr_remove(&ov_idr, ov->id); err_destroy_trans: of_changeset_destroy(&ov->cset); +err_no_mem: + of_node_put(ov->target_root); + kfree(ov->indirect_id); kfree(ov); mutex_unlock(&of_mutex); return err; } + +/** + * of_overlay_create() - Create and apply an overlay + * @tree: Device node containing all the overlays + * + * Creates and applies an overlay while also keeping track + * of the overlay in a list. This list can be used to prevent + * illegal overlay removals. + * + * Returns the id of the created overlay, or an negative error number + */ +int of_overlay_create(struct device_node *tree) +{ + return __of_overlay_create(tree, NULL, NULL); +} EXPORT_SYMBOL_GPL(of_overlay_create); +/** + * of_overlay_create_indirect() - Create and apply an overlay + * @tree: Device node containing all the overlays + * @id: Indirect property phandle + * + * Creates and applies an overlay while also keeping track + * of the overlay in a list. This list can be used to prevent + * illegal overlay removals. + * + * Returns the id of the created overlay, or an negative error number + */ +int of_overlay_create_indirect(struct device_node *tree, const char *id) +{ + return __of_overlay_create(tree, id, NULL); +} +EXPORT_SYMBOL_GPL(of_overlay_create_indirect); + +/** + * of_overlay_create_target_root() - Create and apply an overlay + * under which will be limited to target_root + * @tree: Device node containing all the overlays + * @target_root: Target root for the overlay. + * + * Creates and applies an overlay while also keeping track + * of the overlay in a list. This list can be used to prevent + * illegal overlay removals. The overlay is only allowed to + * target nodes under the target_root node. + * + * Returns the id of the created overlay, or an negative error number + */ +int of_overlay_create_target_root(struct device_node *tree, + struct device_node *target_root) +{ + return __of_overlay_create(tree, NULL, target_root); +} +EXPORT_SYMBOL_GPL(of_overlay_create_target_root); + /* check whether the given node, lies under the given tree */ static int overlay_subtree_check(struct device_node *tree, struct device_node *dn) @@ -512,7 +801,9 @@ int of_overlay_destroy(int id) of_free_overlay_info(ov); idr_remove(&ov_idr, id); of_changeset_destroy(&ov->cset); - kfree(ov); + + kobject_del(&ov->kobj); + kobject_put(&ov->kobj); err = 0; @@ -542,7 +833,8 @@ int of_overlay_destroy_all(void) of_changeset_revert(&ov->cset); of_free_overlay_info(ov); idr_remove(&ov_idr, ov->id); - kfree(ov); + kobject_del(&ov->kobj); + kobject_put(&ov->kobj); } mutex_unlock(&of_mutex); @@ -550,3 +842,18 @@ int of_overlay_destroy_all(void) return 0; } EXPORT_SYMBOL_GPL(of_overlay_destroy_all); + +/* called from of_init() */ +int of_overlay_init(void) +{ + int rc; + + ov_kset = kset_create_and_add("overlays", NULL, &of_kset->kobj); + if (!ov_kset) + return -ENOMEM; + + rc = sysfs_create_files(&ov_kset->kobj, overlay_global_attrs); + WARN(rc, "%s: error adding global attributes\n", __func__); + + return rc; +} diff --git a/drivers/of/unittest-data/testcases.dts b/drivers/of/unittest-data/testcases.dts index 12f7c3d649c88..8052b96c1d64d 100644 --- a/drivers/of/unittest-data/testcases.dts +++ b/drivers/of/unittest-data/testcases.dts @@ -75,5 +75,19 @@ target = <0x00000000>; }; }; + overlay16 { + fragment@0 { + target-indirect { + unittest16 { + target = <0x00000000>; + }; + }; + }; + }; + overlay18 { + fragment@0 { + target = <0x00000000>; + }; + }; }; }; }; diff --git a/drivers/of/unittest-data/tests-overlay.dtsi b/drivers/of/unittest-data/tests-overlay.dtsi index 02ba56c20fe12..e10ff5a9b9345 100644 --- a/drivers/of/unittest-data/tests-overlay.dtsi +++ b/drivers/of/unittest-data/tests-overlay.dtsi @@ -110,6 +110,30 @@ }; }; }; + + unittest16: test-unittest16 { + compatible = "unittest"; + status = "disabled"; + reg = <16>; + }; + + unittest17: test-unittest17 { + compatible = "unittest"; + status = "disabled"; + reg = <17>; + }; + + unittest18: test-unittest18 { + compatible = "unittest"; + status = "disabled"; + reg = <18>; + }; + + unittest19: test-unittest19 { + compatible = "unittest"; + status = "disabled"; + reg = <19>; + }; }; }; @@ -325,5 +349,48 @@ }; }; + /* test enable using indirect functionality */ + overlay16 { + fragment@0 { + target-indirect { + unittest16 { + target = <&unittest16>; + }; + }; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test enable using target root (relative path) */ + overlay17 { + fragment@0 { + target-path = "/"; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test enable using target phandle */ + overlay18 { + fragment@0 { + target = <&unittest18>; + __overlay__ { + status = "okay"; + }; + }; + }; + + /* test trying to enable out of root (should fail) */ + overlay19 { + fragment@0 { + target = <&unittest19>; + __overlay__ { + status = "okay"; + }; + }; + }; }; }; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 18016341d5a91..55ded19f549fe 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -753,6 +753,11 @@ static void __init of_unittest_match_node(void) } } +static struct resource test_bus_res = { + .start = 0xfffffff8, + .end = 0xfffffff9, + .flags = IORESOURCE_MEM, +}; static const struct platform_device_info test_bus_info = { .name = "unittest-bus", }; @@ -795,6 +800,7 @@ static void __init of_unittest_platform_populate(void) if (rc) return; test_bus->dev.of_node = np; + platform_device_add_resources(test_bus, &test_bus_res, 1); of_platform_populate(np, match, NULL, &test_bus->dev); for_each_child_of_node(np, child) { @@ -1852,6 +1858,272 @@ static inline void of_unittest_overlay_i2c_15(void) { } #endif +static void of_unittest_overlay_16(void) +{ + int ret; + int overlay_nr = 16; + int unittest_nr = 16; + enum overlay_type ovtype = PDEV_OVERLAY; + int before = 0; + int after = 1; + struct device_node *np = NULL; + int id = -1; + + /* unittest device must not be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return; + } + + np = of_find_node_by_path(overlay_path(overlay_nr)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr)); + ret = -EINVAL; + goto out; + } + + ret = of_overlay_create_indirect(np, "unittest16"); + if (ret < 0) { + unittest(0, "could not create overlay from \"%s\"\n", + overlay_path(overlay_nr)); + goto out; + } + id = ret; + of_unittest_track_overlay(id); + + ret = 0; + +out: + of_node_put(np); + + if (ret) + return; + + /* unittest device must be to set to after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return; + } + + unittest(1, "overlay test %d passed\n", 16); +} + +static void of_unittest_overlay_17(void) +{ + int ret; + int overlay_nr = 17; + int unittest_nr = 17; + enum overlay_type ovtype = PDEV_OVERLAY; + int before = 0; + int after = 1; + const char *root_path; + struct device_node *np = NULL, *target_root = NULL; + int id = -1; + + /* unittest device must not be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return; + } + + np = of_find_node_by_path(overlay_path(overlay_nr)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr)); + ret = -EINVAL; + goto out; + } + + root_path = "/testcase-data/overlay-node/test-bus/test-unittest17"; + target_root = of_find_node_by_path(root_path); + if (!target_root) { + unittest(0, "could not find target_root node @\"%s\"\n", + root_path); + ret = -EINVAL; + goto out; + } + + ret = of_overlay_create_target_root(np, target_root); + of_node_put(target_root); + + if (ret < 0) { + unittest(0, "could not create overlay from \"%s\"\n", + overlay_path(overlay_nr)); + goto out; + } + id = ret; + of_unittest_track_overlay(id); + + ret = 0; + +out: + of_node_put(np); + + if (ret) + return; + + /* unittest device must be to set to after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return; + } + + unittest(1, "overlay test %d passed\n", 17); +} + +static void of_unittest_overlay_18(void) +{ + int ret; + int overlay_nr = 18; + int unittest_nr = 18; + enum overlay_type ovtype = PDEV_OVERLAY; + int before = 0; + int after = 1; + const char *root_path; + struct device_node *np = NULL, *target_root = NULL; + int id = -1; + + /* unittest device must not be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return; + } + + np = of_find_node_by_path(overlay_path(overlay_nr)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr)); + ret = -EINVAL; + goto out; + } + + root_path = "/testcase-data/overlay-node/test-bus/test-unittest18"; + target_root = of_find_node_by_path(root_path); + if (!target_root) { + unittest(0, "could not find target_root node @\"%s\"\n", + root_path); + ret = -EINVAL; + goto out; + } + + ret = of_overlay_create_target_root(np, target_root); + of_node_put(target_root); + + if (ret < 0) { + unittest(0, "could not create overlay from \"%s\"\n", + overlay_path(overlay_nr)); + goto out; + } + id = ret; + of_unittest_track_overlay(id); + + ret = 0; + +out: + of_node_put(np); + + if (ret) + return; + + /* unittest device must be to set to after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return; + } + + unittest(1, "overlay test %d passed\n", 18); +} + +static void of_unittest_overlay_19(void) +{ + int ret; + int overlay_nr = 19; + int unittest_nr = 19; + enum overlay_type ovtype = PDEV_OVERLAY; + int before = 0; + int after = 0; + const char *root_path; + struct device_node *np = NULL, *target_root = NULL; + int id = -1; + + /* unittest device must not be in before state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != before) { + unittest(0, "overlay @\"%s\" with device @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !before ? "enabled" : "disabled"); + return; + } + + np = of_find_node_by_path(overlay_path(overlay_nr)); + if (np == NULL) { + unittest(0, "could not find overlay node @\"%s\"\n", + overlay_path(overlay_nr)); + ret = -EINVAL; + goto out; + } + + root_path = "/testcase-data/overlay-node/test-bus/test-unittest19"; + target_root = of_find_node_by_path(root_path); + if (!target_root) { + unittest(0, "could not find target_root node @\"%s\"\n", + root_path); + ret = -EINVAL; + goto out; + } + + ret = of_overlay_create_target_root(np, target_root); + of_node_put(target_root); + + if (ret >= 0) { + unittest(0, "created overlay from \"%s\" while we shouldn't\n", + overlay_path(overlay_nr)); + id = ret; + of_unittest_track_overlay(id); + ret = -EINVAL; + goto out; + } + + ret = 0; + +out: + of_node_put(np); + + if (ret) + return; + + /* unittest device must be to set to after state */ + if (of_unittest_device_exists(unittest_nr, ovtype) != after) { + unittest(0, "overlay @\"%s\" failed to create @\"%s\" %s\n", + overlay_path(overlay_nr), + unittest_path(unittest_nr, ovtype), + !after ? "enabled" : "disabled"); + return; + } + + unittest(1, "overlay test %d passed\n", 16); +} + + static void __init of_unittest_overlay(void) { struct device_node *bus_np = NULL; @@ -1903,6 +2175,12 @@ static void __init of_unittest_overlay(void) of_unittest_overlay_10(); of_unittest_overlay_11(); + of_unittest_overlay_16(); + + of_unittest_overlay_17(); + of_unittest_overlay_18(); + of_unittest_overlay_19(); + #if IS_BUILTIN(CONFIG_I2C) if (unittest(of_unittest_overlay_i2c_init() == 0, "i2c init failed\n")) goto out; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 92c909eed6b50..23ad978077976 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -703,14 +703,6 @@ static const struct file_operations spidev_fops = { static struct class *spidev_class; -#ifdef CONFIG_OF -static const struct of_device_id spidev_dt_ids[] = { - { .compatible = "rohm,dh2228fv" }, - {}, -}; -MODULE_DEVICE_TABLE(of, spidev_dt_ids); -#endif - /*-------------------------------------------------------------------------*/ static int spidev_probe(struct spi_device *spi) @@ -719,17 +711,6 @@ static int spidev_probe(struct spi_device *spi) int status; unsigned long minor; - /* - * spidev should never be referenced in DT without a specific - * compatbile string, it is a Linux implementation thing - * rather than a description of the hardware. - */ - if (spi->dev.of_node && !of_match_device(spidev_dt_ids, &spi->dev)) { - dev_err(&spi->dev, "buggy DT: spidev listed directly in DT\n"); - WARN_ON(spi->dev.of_node && - !of_match_device(spidev_dt_ids, &spi->dev)); - } - /* Allocate driver data */ spidev = kzalloc(sizeof(*spidev), GFP_KERNEL); if (!spidev) @@ -796,6 +777,13 @@ static int spidev_remove(struct spi_device *spi) return 0; } +static const struct of_device_id spidev_dt_ids[] = { + { .compatible = "rohm,dh2228fv" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, spidev_dt_ids); + static struct spi_driver spidev_spi_driver = { .driver = { .name = "spidev", diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index d9a37191a1ae0..c574e7928115e 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1429,10 +1429,10 @@ static int __init omap8250_console_fixup(void) } add_preferred_console("ttyS", idx, options); - pr_err("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", + pr_info("WARNING: Your 'console=ttyO%d' has been replaced by 'ttyS%d'\n", idx, idx); - pr_err("This ensures that you still see kernel messages. Please\n"); - pr_err("update your kernel commandline.\n"); + pr_info("This ensures that you still see kernel messages. Please\n"); + pr_info("update your kernel commandline.\n"); return 0; } console_initcall(omap8250_console_fixup); diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 7a2172b5e93cd..caa7b281a3433 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1589,6 +1589,31 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, return 0; } +static int serial_omap_of_get_port_line(struct device_node *np) +{ + unsigned long val; + const char *hwmod; + int ret; + + /* first try the serial alias */ + ret = of_alias_get_id(np, "serial"); + if (ret >= 0) + return ret; + + /* no? calculate it from hwmods */ + ret = of_property_read_string(np, "ti,hwmods", &hwmod); + if (ret != 0 || strncmp(hwmod, "uart", 4) || + kstrtoul(hwmod + 4, 10, &val)) + return -ENODEV; + + /* numbering of hwmods is +1 */ + ret = (int)val - 1; + if (ret < 0) + return -ENODEV; + + return ret; +} + static int serial_omap_probe(struct platform_device *pdev) { struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev); @@ -1606,7 +1631,10 @@ static int serial_omap_probe(struct platform_device *pdev) return -EPROBE_DEFER; wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1); omap_up_info = of_get_uart_port_info(&pdev->dev); - pdev->dev.platform_data = omap_up_info; + ret = platform_device_add_data(pdev, omap_up_info, + sizeof(*omap_up_info)); + if (ret != 0) + return ret; } else { uartirq = platform_get_irq(pdev, 0); if (uartirq < 0) @@ -1632,7 +1660,7 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.ops = &serial_omap_pops; if (pdev->dev.of_node) - ret = of_alias_get_id(pdev->dev.of_node, "serial"); + ret = serial_omap_of_get_port_line(pdev->dev.of_node); else ret = pdev->id; diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 8a15c323c030f..01d921c3aa945 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -126,10 +126,10 @@ config UIO_FSL_ELBC_GPCM_NETX5152 config UIO_PRUSS tristate "Texas Instruments PRUSS driver" - depends on ARCH_DAVINCI_DA850 + depends on ARCH_DAVINCI_DA850 || SOC_AM33XX select GENERIC_ALLOCATOR help - PRUSS driver for OMAPL138/DA850/AM18XX devices + PRUSS driver for OMAPL138/DA850/AM18XX and AM33XX devices PRUSS driver requires user space components, examples and user space driver is available from below SVN repo - you may use anonymous login diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c index 818735bb8c3a7..c2370409ac2a1 100644 --- a/drivers/uio/uio_pruss.c +++ b/drivers/uio/uio_pruss.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -26,6 +27,11 @@ #include #include #include +#include +#include +#include +#include +#include #define DRV_NAME "pruss_uio" #define DRV_VERSION "1.0" @@ -105,10 +111,12 @@ static void pruss_cleanup(struct device *dev, struct uio_pruss_dev *gdev) dma_free_coherent(dev, extram_pool_sz, gdev->ddr_vaddr, gdev->ddr_paddr); } +#ifdef CONFIG_ARCH_DAVINCI_DA850 if (gdev->sram_vaddr) gen_pool_free(gdev->sram_pool, gdev->sram_vaddr, sram_pool_sz); +#endif kfree(gdev->info); clk_put(gdev->pruss_clk); kfree(gdev); @@ -119,9 +127,15 @@ static int pruss_probe(struct platform_device *pdev) struct uio_info *p; struct uio_pruss_dev *gdev; struct resource *regs_prussio; + struct resource res; struct device *dev = &pdev->dev; int ret = -ENODEV, cnt = 0, len; struct uio_pruss_pdata *pdata = dev_get_platdata(dev); + struct pinctrl *pinctrl; + + int count; + struct device_node *child; + const char *pin_name; gdev = kzalloc(sizeof(struct uio_pruss_dev), GFP_KERNEL); if (!gdev) @@ -132,7 +146,7 @@ static int pruss_probe(struct platform_device *pdev) kfree(gdev); return -ENOMEM; } - +#ifdef CONFIG_ARCH_DAVINCI_DA850 /* Power on PRU in case its not done as part of boot-loader */ gdev->pruss_clk = clk_get(dev, "pruss"); if (IS_ERR(gdev->pruss_clk)) { @@ -144,8 +158,25 @@ static int pruss_probe(struct platform_device *pdev) } else { clk_enable(gdev->pruss_clk); } +#endif + + if (pdev->dev.of_node) { + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_get_sync(&pdev->dev); + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n"); + return ret; + } - regs_prussio = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ret = of_address_to_resource(pdev->dev.of_node, 0, &res); + if (IS_ERR_VALUE(ret)) { + dev_err(&pdev->dev, "failed to parse DT reg\n"); + return ret; + } + regs_prussio = &res; + } + else + regs_prussio = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs_prussio) { dev_err(dev, "No PRUSS I/O resource specified\n"); goto out_free; @@ -156,7 +187,50 @@ static int pruss_probe(struct platform_device *pdev) goto out_free; } - if (pdata->sram_pool) { + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + else{ + count = of_get_child_count(pdev->dev.of_node); + if (!count){ + dev_info(&pdev->dev, "No children\n"); + return -ENODEV; + } + // Run through all children. They have lables for easy reference. + for_each_child_of_node(pdev->dev.of_node, child){ + enum of_gpio_flags flags; + unsigned gpio; + + count = of_gpio_count(child); + + ret = of_property_count_strings(child, "pin-names"); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get pin-names\n"); + continue; + } + if(count != ret){ + dev_err(&pdev->dev, "The number of gpios (%d) does not match"\ + " the number of pin names (%d)\n", count, ret); + continue; + } + + for(cnt=0; cntdev, "Error on pin-name #%d\n", cnt); + gpio = of_get_gpio_flags(child, cnt, &flags); + ret = devm_gpio_request_one(&pdev->dev, gpio, flags, pin_name); + if (ret < 0) { + dev_err(dev, "Failed to request GPIO %d (%s) flags: '%d', error %d\n", + gpio, pin_name, flags, ret); + } + } + } + } + if (pdata && pdata->sram_pool) { gdev->sram_pool = pdata->sram_pool; gdev->sram_vaddr = (unsigned long)gen_pool_dma_alloc(gdev->sram_pool, @@ -181,7 +255,17 @@ static int pruss_probe(struct platform_device *pdev) goto out_free; } - gdev->pintc_base = pdata->pintc_base; + if (pdev->dev.of_node) { + ret = of_property_read_u32(pdev->dev.of_node, + "ti,pintc-offset", + &gdev->pintc_base); + if (ret < 0) { + dev_err(&pdev->dev, + "Can't parse ti,pintc-offset property\n"); + goto out_free; + } + } else + gdev->pintc_base = pdata->pintc_base; gdev->hostirq_start = platform_get_irq(pdev, 0); for (cnt = 0, p = gdev->info; cnt < MAX_PRUSS_EVT; cnt++, p++) { @@ -189,6 +273,7 @@ static int pruss_probe(struct platform_device *pdev) p->mem[0].size = resource_size(regs_prussio); p->mem[0].memtype = UIO_MEM_PHYS; +#ifdef CONFIG_ARCH_DAVINCI_DA850 p->mem[1].addr = gdev->sram_paddr; p->mem[1].size = sram_pool_sz; p->mem[1].memtype = UIO_MEM_PHYS; @@ -196,7 +281,11 @@ static int pruss_probe(struct platform_device *pdev) p->mem[2].addr = gdev->ddr_paddr; p->mem[2].size = extram_pool_sz; p->mem[2].memtype = UIO_MEM_PHYS; - +#else + p->mem[1].addr = gdev->ddr_paddr; + p->mem[1].size = extram_pool_sz; + p->mem[1].memtype = UIO_MEM_PHYS; +#endif p->name = kasprintf(GFP_KERNEL, "pruss_evt%d", cnt); p->version = DRV_VERSION; @@ -226,11 +315,20 @@ static int pruss_remove(struct platform_device *dev) return 0; } +static const struct of_device_id pruss_dt_ids[] = { + { .compatible = "ti,pruss-v1", .data = NULL, }, + { .compatible = "ti,pruss-v2", .data = NULL, }, + {}, +}; +MODULE_DEVICE_TABLE(of, pruss_dt_ids); + + static struct platform_driver pruss_driver = { .probe = pruss_probe, .remove = pruss_remove, .driver = { .name = DRV_NAME, + .of_match_table = pruss_dt_ids, }, }; diff --git a/firmware/am335x-bone-scale-data.bin b/firmware/am335x-bone-scale-data.bin new file mode 100644 index 0000000000000..296903ec2c0fe Binary files /dev/null and b/firmware/am335x-bone-scale-data.bin differ diff --git a/firmware/am335x-evm-scale-data.bin b/firmware/am335x-evm-scale-data.bin new file mode 100644 index 0000000000000..7e18ce7208b7d Binary files /dev/null and b/firmware/am335x-evm-scale-data.bin differ diff --git a/firmware/am335x-pm-firmware.bin b/firmware/am335x-pm-firmware.bin new file mode 100755 index 0000000000000..6e8a069a46e4b Binary files /dev/null and b/firmware/am335x-pm-firmware.bin differ diff --git a/firmware/am335x-pm-firmware.elf b/firmware/am335x-pm-firmware.elf new file mode 100755 index 0000000000000..a9d3f70ac8e9b Binary files /dev/null and b/firmware/am335x-pm-firmware.elf differ diff --git a/firmware/am43x-evm-scale-data.bin b/firmware/am43x-evm-scale-data.bin new file mode 100644 index 0000000000000..805338a032540 Binary files /dev/null and b/firmware/am43x-evm-scale-data.bin differ diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h index b65d1ef532d52..ccc31fa6f1a7e 100644 --- a/fs/configfs/configfs_internal.h +++ b/fs/configfs/configfs_internal.h @@ -53,13 +53,14 @@ struct configfs_dirent { #define CONFIGFS_ROOT 0x0001 #define CONFIGFS_DIR 0x0002 #define CONFIGFS_ITEM_ATTR 0x0004 +#define CONFIGFS_ITEM_BIN_ATTR 0x0008 #define CONFIGFS_ITEM_LINK 0x0020 #define CONFIGFS_USET_DIR 0x0040 #define CONFIGFS_USET_DEFAULT 0x0080 #define CONFIGFS_USET_DROPPING 0x0100 #define CONFIGFS_USET_IN_MKDIR 0x0200 #define CONFIGFS_USET_CREATING 0x0400 -#define CONFIGFS_NOT_PINNED (CONFIGFS_ITEM_ATTR) +#define CONFIGFS_NOT_PINNED (CONFIGFS_ITEM_ATTR | CONFIGFS_ITEM_BIN_ATTR) extern struct mutex configfs_symlink_mutex; extern spinlock_t configfs_dirent_lock; @@ -72,6 +73,8 @@ extern struct inode * configfs_new_inode(umode_t mode, struct configfs_dirent *, extern int configfs_create(struct dentry *, umode_t mode, void (*init)(struct inode *)); extern int configfs_create_file(struct config_item *, const struct configfs_attribute *); +extern int configfs_create_bin_file(struct config_item *, + const struct configfs_bin_attribute *); extern int configfs_make_dirent(struct configfs_dirent *, struct dentry *, void *, umode_t, int); extern int configfs_dirent_is_ready(struct configfs_dirent *); @@ -88,7 +91,7 @@ extern void configfs_release_fs(void); extern struct rw_semaphore configfs_rename_sem; extern const struct file_operations configfs_dir_operations; extern const struct file_operations configfs_file_operations; -extern const struct file_operations bin_fops; +extern const struct file_operations configfs_bin_file_operations; extern const struct inode_operations configfs_dir_inode_operations; extern const struct inode_operations configfs_root_inode_operations; extern const struct inode_operations configfs_symlink_inode_operations; @@ -119,6 +122,13 @@ static inline struct configfs_attribute * to_attr(struct dentry * dentry) return ((struct configfs_attribute *) sd->s_element); } +static inline struct configfs_bin_attribute *to_bin_attr(struct dentry *dentry) +{ + struct configfs_attribute *attr = to_attr(dentry); + + return container_of(attr, struct configfs_bin_attribute, cb_attr); +} + static inline struct config_item *configfs_get_config_item(struct dentry *dentry) { struct config_item * item = NULL; diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index c81ce7f200a6d..8951466e95dff 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -255,6 +255,12 @@ static void configfs_init_file(struct inode * inode) inode->i_fop = &configfs_file_operations; } +static void configfs_init_bin_file(struct inode *inode) +{ + inode->i_size = 0; + inode->i_fop = &configfs_bin_file_operations; +} + static void init_symlink(struct inode * inode) { inode->i_op = &configfs_symlink_inode_operations; @@ -423,7 +429,9 @@ static int configfs_attach_attr(struct configfs_dirent * sd, struct dentry * den spin_unlock(&configfs_dirent_lock); error = configfs_create(dentry, (attr->ca_mode & S_IALLUGO) | S_IFREG, - configfs_init_file); + (sd->s_type & CONFIGFS_ITEM_ATTR) ? + configfs_init_file : + configfs_init_bin_file); if (error) { configfs_put(sd); return error; @@ -583,6 +591,7 @@ static int populate_attrs(struct config_item *item) { struct config_item_type *t = item->ci_type; struct configfs_attribute *attr; + struct configfs_bin_attribute *bin_attr; int error = 0; int i; @@ -594,6 +603,13 @@ static int populate_attrs(struct config_item *item) break; } } + if (t->ct_bin_attrs) { + for (i = 0; (bin_attr = t->ct_bin_attrs[i]) != NULL; i++) { + error = configfs_create_bin_file(item, bin_attr); + if (error) + break; + } + } if (error) detach_attrs(item); diff --git a/fs/configfs/file.c b/fs/configfs/file.c index 403269ffcdf35..af6cb78a0f014 100644 --- a/fs/configfs/file.c +++ b/fs/configfs/file.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -48,6 +49,10 @@ struct configfs_buffer { struct configfs_item_operations * ops; struct mutex mutex; int needs_read_fill; + int read_in_progress; + int write_in_progress; + char *bin_buffer; + int bin_buffer_size; }; @@ -107,8 +112,16 @@ static ssize_t configfs_read_file(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct configfs_buffer * buffer = file->private_data; + struct configfs_dirent *sd; ssize_t retval = 0; + sd = file->f_path.dentry->d_fsdata; + if (WARN_ON(sd == NULL)) + return -EINVAL; + + if (WARN_ON(!(sd->s_type & CONFIGFS_ITEM_ATTR))) + return -EINVAL; + mutex_lock(&buffer->mutex); if (buffer->needs_read_fill) { if ((retval = fill_read_buffer(file->f_path.dentry,buffer))) @@ -123,6 +136,97 @@ configfs_read_file(struct file *file, char __user *buf, size_t count, loff_t *pp return retval; } +/** + * configfs_read_bin_file - read a binary attribute. + * @file: file pointer. + * @buf: buffer to fill. + * @count: number of bytes to read. + * @ppos: starting offset in file. + * + * Userspace wants to read a binary attribute file. The attribute + * descriptor is in the file's ->d_fsdata. The target item is in the + * directory's ->d_fsdata. + * + * We check whether we need to refill the buffer. If so we will + * call the attributes' ops->read_bin_attribute() twice. The first time we + * will pass a NULL as a buffer pointer, which the attributes' method + * will use to return the size of the buffer required. If no error + * occurs we will allocate the buffer using vmalloc and call + * ops->read_bin_atribute() again passing that buffer as an argument. + * Then we just copy to user-space using simple_read_from_buffer. + */ + +static ssize_t +configfs_read_bin_file(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct configfs_buffer *buffer = file->private_data; + struct dentry *dentry = file->f_path.dentry; + struct configfs_dirent *sd = dentry->d_fsdata; + struct config_item *item = to_item(dentry->d_parent); + struct configfs_item_operations *ops = buffer->ops; + struct configfs_bin_attribute *bin_attr = to_bin_attr(dentry); + ssize_t retval = 0; + ssize_t len = min_t(size_t, count, PAGE_SIZE); + + if (WARN_ON(sd == NULL)) + return -EINVAL; + + if (WARN_ON(!(sd->s_type & CONFIGFS_ITEM_BIN_ATTR))) + return -EINVAL; + + mutex_lock(&buffer->mutex); + + /* we don't support switching read/write modes */ + if (buffer->write_in_progress) { + retval = -EINVAL; + goto out; + } + buffer->read_in_progress = 1; + + if (buffer->needs_read_fill) { + + /* perform first read with buf == NULL to get extent */ + len = ops->read_bin_attribute(item, bin_attr, NULL, 0); + if (len < 0) { + retval = len; + goto out; + } + + /* do not exceed the maximum value */ + if (bin_attr->cb_max_size && len > bin_attr->cb_max_size) { + retval = -EFBIG; + goto out; + } + + buffer->bin_buffer = vmalloc(len); + if (buffer->bin_buffer == NULL) { + retval = -ENOMEM; + goto out; + } + buffer->bin_buffer_size = len; + + /* perform second read to fill buffer */ + len = ops->read_bin_attribute(item, bin_attr, + buffer->bin_buffer, len); + if (len < 0) { + retval = len; + vfree(buffer->bin_buffer); + buffer->bin_buffer_size = 0; + buffer->bin_buffer = NULL; + goto out; + } + + buffer->needs_read_fill = 0; + } + + retval = simple_read_from_buffer(buf, count, ppos, buffer->bin_buffer, + buffer->bin_buffer_size); +out: + mutex_unlock(&buffer->mutex); + return retval; +} + /** * fill_write_buffer - copy buffer from userspace. @@ -197,9 +301,16 @@ flush_write_buffer(struct dentry * dentry, struct configfs_buffer * buffer, size static ssize_t configfs_write_file(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - struct configfs_buffer * buffer = file->private_data; + struct configfs_buffer *buffer = file->private_data; + struct configfs_dirent *sd = file->f_path.dentry->d_fsdata; ssize_t len; + if (WARN_ON(sd == NULL)) + return -EINVAL; + + if (WARN_ON(!(sd->s_type & CONFIGFS_ITEM_ATTR))) + return -EINVAL; + mutex_lock(&buffer->mutex); len = fill_write_buffer(buffer, buf, count); if (len > 0) @@ -210,10 +321,86 @@ configfs_write_file(struct file *file, const char __user *buf, size_t count, lof return len; } -static int check_perm(struct inode * inode, struct file * file) +/** + * configfs_write_bin_file - write a binary attribute. + * @file: file pointer + * @buf: data to write + * @count: number of bytes + * @ppos: starting offset + * + * Writing to a binary attribute file is similar to a normal read. + * We buffer the consecutive writes (binary attribute files do not + * support lseek) in a continuously growing buffer, but we don't + * commit until the close of the file. + */ + +static ssize_t +configfs_write_bin_file(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct configfs_buffer *buffer = file->private_data; + struct dentry *dentry = file->f_path.dentry; + struct configfs_dirent *sd = dentry->d_fsdata; + struct configfs_bin_attribute *bin_attr = to_bin_attr(dentry); + void *tbuf = NULL; + ssize_t len; + + if (WARN_ON(sd == NULL)) + return -EINVAL; + + if (WARN_ON(!(sd->s_type & CONFIGFS_ITEM_BIN_ATTR))) + return -EINVAL; + + mutex_lock(&buffer->mutex); + + /* we don't support switching read/write modes */ + if (buffer->read_in_progress) { + len = -EINVAL; + goto out; + } + buffer->write_in_progress = 1; + + /* buffer grows? */ + if (*ppos + count > buffer->bin_buffer_size) { + + if (bin_attr->cb_max_size && + *ppos + count > bin_attr->cb_max_size) { + len = -EFBIG; + } + + tbuf = vmalloc(*ppos + count); + if (tbuf == NULL) { + len = -ENOMEM; + goto out; + } + + /* copy old contents */ + if (buffer->bin_buffer) { + memcpy(tbuf, buffer->bin_buffer, + buffer->bin_buffer_size); + vfree(buffer->bin_buffer); + } + + /* clear the new area */ + memset(tbuf + buffer->bin_buffer_size, 0, + *ppos + count - buffer->bin_buffer_size); + buffer->bin_buffer = tbuf; + buffer->bin_buffer_size = *ppos + count; + } + + len = simple_write_to_buffer(buffer->bin_buffer, + buffer->bin_buffer_size, ppos, buf, count); + if (len > 0) + *ppos += len; +out: + mutex_unlock(&buffer->mutex); + return len; +} + +static int check_perm(struct inode *inode, struct file *file, + struct config_item *item, struct configfs_attribute *attr, + int type) { - struct config_item *item = configfs_get_config_item(file->f_path.dentry->d_parent); - struct configfs_attribute * attr = to_attr(file->f_path.dentry); struct configfs_buffer * buffer; struct configfs_item_operations * ops = NULL; int error = 0; @@ -238,9 +425,16 @@ static int check_perm(struct inode * inode, struct file * file) */ if (file->f_mode & FMODE_WRITE) { - if (!(inode->i_mode & S_IWUGO) || !ops->store_attribute) + if (!(inode->i_mode & S_IWUGO)) goto Eaccess; + if ((type & CONFIGFS_ITEM_ATTR) && + !ops->store_attribute) + goto Eaccess; + + if ((type & CONFIGFS_ITEM_BIN_ATTR) && + !ops->write_bin_attribute) + goto Eaccess; } /* File needs read support. @@ -248,7 +442,13 @@ static int check_perm(struct inode * inode, struct file * file) * must be a show method for it. */ if (file->f_mode & FMODE_READ) { - if (!(inode->i_mode & S_IRUGO) || !ops->show_attribute) + if (!(inode->i_mode & S_IRUGO)) + goto Eaccess; + + if ((type & CONFIGFS_ITEM_ATTR) && !ops->show_attribute) + goto Eaccess; + + if ((type & CONFIGFS_ITEM_BIN_ATTR) && !ops->read_bin_attribute) goto Eaccess; } @@ -262,6 +462,8 @@ static int check_perm(struct inode * inode, struct file * file) } mutex_init(&buffer->mutex); buffer->needs_read_fill = 1; + buffer->read_in_progress = 0; + buffer->write_in_progress = 0; buffer->ops = ops; file->private_data = buffer; goto Done; @@ -279,17 +481,12 @@ static int check_perm(struct inode * inode, struct file * file) return error; } -static int configfs_open_file(struct inode * inode, struct file * filp) -{ - return check_perm(inode,filp); -} - -static int configfs_release(struct inode * inode, struct file * filp) +static int do_release(struct inode *inode, struct file *filp, + struct config_item *item, struct configfs_attribute *attr, + int type) { - struct config_item * item = to_item(filp->f_path.dentry->d_parent); - struct configfs_attribute * attr = to_attr(filp->f_path.dentry); - struct module * owner = attr->ca_owner; - struct configfs_buffer * buffer = filp->private_data; + struct module *owner = attr->ca_owner; + struct configfs_buffer *buffer = filp->private_data; if (item) config_item_put(item); @@ -305,12 +502,86 @@ static int configfs_release(struct inode * inode, struct file * filp) return 0; } +static int configfs_open_file(struct inode *inode, struct file *filp) +{ + return check_perm(inode, filp, + configfs_get_config_item(filp->f_path.dentry->d_parent), + to_attr(filp->f_path.dentry), CONFIGFS_ITEM_ATTR); +} + +static int configfs_release_file(struct inode *inode, struct file *filp) +{ + return do_release(inode, filp, + to_item(filp->f_path.dentry->d_parent), + to_attr(filp->f_path.dentry), CONFIGFS_ITEM_ATTR); +} + +static int configfs_open_bin_file(struct inode *inode, struct file *filp) +{ + return check_perm(inode, filp, + configfs_get_config_item(filp->f_path.dentry->d_parent), + to_attr(filp->f_path.dentry), CONFIGFS_ITEM_BIN_ATTR); +} + +/** + * configfs_release_bin_file - write a binary attribute. + * @inode: inode pointer + * @filp: file pointer + * + * Releasing a binary attribute file is similar for a read op + * to the normal attribute file. When writing we call the + * attributes' ops->write_bin_attribute() method to commit the + * changes to the attribute. + */ + +static int configfs_release_bin_file(struct inode *inode, struct file *filp) +{ + struct configfs_buffer *buffer = filp->private_data; + struct dentry *dentry = filp->f_path.dentry; + struct config_item *item = to_item(dentry->d_parent); + struct configfs_item_operations *ops = buffer->ops; + struct configfs_bin_attribute *bin_attr = to_bin_attr(dentry); + ssize_t len = 0; + int ret; + + buffer->read_in_progress = 0; + + if (buffer->write_in_progress) { + buffer->write_in_progress = 0; + + len = ops->write_bin_attribute(item, bin_attr, + buffer->bin_buffer, buffer->bin_buffer_size); + + /* vfree on NULL is safe */ + vfree(buffer->bin_buffer); + buffer->bin_buffer = NULL; + buffer->bin_buffer_size = 0; + buffer->needs_read_fill = 1; + } + + ret = do_release(inode, filp, + to_item(filp->f_path.dentry->d_parent), + to_attr(filp->f_path.dentry), CONFIGFS_ITEM_BIN_ATTR); + if (len < 0) + return len; + return ret; +} + + const struct file_operations configfs_file_operations = { .read = configfs_read_file, .write = configfs_write_file, .llseek = generic_file_llseek, .open = configfs_open_file, - .release = configfs_release, + .release = configfs_release_file, +}; + +const struct file_operations configfs_bin_file_operations = { + .read = configfs_read_bin_file, + .write = configfs_write_bin_file, + .llseek = NULL, /* bin file is not seekable */ + .open = configfs_open_bin_file, + .release = configfs_release_bin_file, }; /** @@ -334,3 +605,24 @@ int configfs_create_file(struct config_item * item, const struct configfs_attrib return error; } +/** + * configfs_create_bin_file - create a binary attribute file for an item. + * @item: item we're creating for. + * @attr: atrribute descriptor. + */ + +int configfs_create_bin_file(struct config_item *item, + const struct configfs_bin_attribute *bin_attr) +{ + struct dentry *dir = item->ci_dentry; + struct configfs_dirent *parent_sd = dir->d_fsdata; + umode_t mode = (bin_attr->cb_attr.ca_mode & S_IALLUGO) | S_IFREG; + int error = 0; + + mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_NORMAL); + error = configfs_make_dirent(parent_sd, NULL, (void *) bin_attr, mode, + CONFIGFS_ITEM_BIN_ATTR); + mutex_unlock(&dir->d_inode->i_mutex); + + return error; +} diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c index 8d89f5fd0331c..35f80aa00d34e 100644 --- a/fs/configfs/inode.c +++ b/fs/configfs/inode.c @@ -218,7 +218,7 @@ const unsigned char * configfs_get_name(struct configfs_dirent *sd) if (sd->s_type & (CONFIGFS_DIR | CONFIGFS_ITEM_LINK)) return sd->s_dentry->d_name.name; - if (sd->s_type & CONFIGFS_ITEM_ATTR) { + if (sd->s_type & (CONFIGFS_ITEM_ATTR | CONFIGFS_ITEM_BIN_ATTR)) { attr = sd->s_element; return attr->ca_name; } diff --git a/include/dt-bindings/board/am335x-bbw-bbb-base.h b/include/dt-bindings/board/am335x-bbw-bbb-base.h new file mode 100644 index 0000000000000..35f6d57ef4923 --- /dev/null +++ b/include/dt-bindings/board/am335x-bbw-bbb-base.h @@ -0,0 +1,103 @@ +/* + * This header provides constants for bbw/bbb pinctrl bindings. + * + * Copyright (C) 2014 Robert Nelson + * + * Numbers Based on: https://github.com/derekmolloy/boneDeviceTree/tree/master/docs + */ + +#ifndef _DT_BINDINGS_BOARD_AM335X_BBW_BBB_BASE_H +#define _DT_BINDINGS_BOARD_AM335X_BBW_BBB_BASE_H + +#define BONE_P8_03 0x018 +#define BONE_P8_04 0x01C + +#define BONE_P8_05 0x008 +#define BONE_P8_06 0x00C +#define BONE_P8_07 0x090 +#define BONE_P8_08 0x094 + +#define BONE_P8_09 0x09C +#define BONE_P8_10 0x098 +#define BONE_P8_11 0x034 +#define BONE_P8_12 0x030 + +#define BONE_P8_13 0x024 +#define BONE_P8_14 0x028 +#define BONE_P8_15 0x03C +#define BONE_P8_16 0x038 + +#define BONE_P8_17 0x02C +#define BONE_P8_18 0x08C +#define BONE_P8_19 0x020 +#define BONE_P8_20 0x084 + +#define BONE_P8_21 0x080 +#define BONE_P8_22 0x014 +#define BONE_P8_23 0x010 +#define BONE_P8_24 0x004 + +#define BONE_P8_25 0x000 +#define BONE_P8_26 0x07C +#define BONE_P8_27 0x0E0 +#define BONE_P8_28 0x0E8 + +#define BONE_P8_29 0x0E4 +#define BONE_P8_30 0x0EC +#define BONE_P8_31 0x0D8 +#define BONE_P8_32 0x0DC + +#define BONE_P8_33 0x0D4 +#define BONE_P8_34 0x0CC +#define BONE_P8_35 0x0D0 +#define BONE_P8_36 0x0C8 + +#define BONE_P8_37 0x0C0 +#define BONE_P8_38 0x0C4 +#define BONE_P8_39 0x0B8 +#define BONE_P8_40 0x0BC + +#define BONE_P8_41 0x0B0 +#define BONE_P8_42 0x0B4 +#define BONE_P8_43 0x0A8 +#define BONE_P8_44 0x0AC + +#define BONE_P8_45 0x0A0 +#define BONE_P8_46 0x0A4 + +#define BONE_P9_11 0x070 +#define BONE_P9_12 0x078 + +#define BONE_P9_13 0x074 +#define BONE_P9_14 0x048 +#define BONE_P9_15 0x040 +#define BONE_P9_16 0x04C + +#define BONE_P9_17 0x15C +#define BONE_P9_18 0x158 +#define BONE_P9_19 0x17C +#define BONE_P9_20 0x178 + +#define BONE_P9_21 0x154 +#define BONE_P9_22 0x150 +#define BONE_P9_23 0x044 +#define BONE_P9_24 0x184 + +#define BONE_P9_25 0x1AC +#define BONE_P9_26 0x180 +#define BONE_P9_27 0x1A4 +#define BONE_P9_28 0x19C + +#define BONE_P9_29 0x194 +#define BONE_P9_30 0x198 +#define BONE_P9_31 0x190 + +/* Shared P21 of P11 */ +#define BONE_P9_41A 0x1B4 +#define BONE_P9_41B 0x1A8 + +/* Shared P22 of P11 */ +#define BONE_P9_42A 0x164 +#define BONE_P9_42B 0x1A0 + +#endif diff --git a/include/linux/configfs.h b/include/linux/configfs.h index 34025df618296..2e416b4ecbc88 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -51,6 +51,7 @@ struct module; struct configfs_item_operations; struct configfs_group_operations; struct configfs_attribute; +struct configfs_bin_attribute; struct configfs_subsystem; struct config_item { @@ -84,6 +85,7 @@ struct config_item_type { struct configfs_item_operations *ct_item_ops; struct configfs_group_operations *ct_group_ops; struct configfs_attribute **ct_attrs; + struct configfs_bin_attribute **ct_bin_attrs; }; /** @@ -207,6 +209,96 @@ static ssize_t _item##_attr_store(struct config_item *item, \ return ret; \ } +struct file; +struct vm_area_struct; + +struct configfs_bin_attribute { + struct configfs_attribute cb_attr; /* std. attribute */ + void *cb_private; /* for user */ + size_t cb_max_size; /* max core size */ +}; + +/* + * Similar to CONFIGFS_ATTR_STRUCT + */ +#define CONFIGFS_BIN_ATTR_STRUCT(_item) \ +struct _item##_bin_attribute { \ + struct configfs_bin_attribute bin_attr; \ + ssize_t (*read)(struct _item *, void *, size_t); \ + ssize_t (*write)(struct _item *, const void *, size_t); \ +} + +/* macros to create static binary attributes easier */ +#define __CONFIGFS_BIN_ATTR(_name, _mode, _read, _write, _priv, _max) \ +{ \ + .bin_attr = { \ + .cb_attr = { \ + .ca_name = __stringify(_name), \ + .ca_mode = _mode, \ + .ca_owner = THIS_MODULE, \ + }, \ + .cb_private = _priv, \ + .cb_max_size = _max, \ + }, \ + .read = _read, \ + .write = _write, \ +} + +#define __CONFIGFS_BIN_ATTR_RO(_name, _priv, _max) { \ + .bin_attr = { \ + .cb_attr = { \ + .ca_name = __stringify(_name), \ + .ca_mode = _mode, \ + .ca_owner = THIS_MODULE, \ + }, \ + .cb_private = _priv, \ + .cb_max_size = _max, \ + }, \ + .read = _read, \ +} + +#define __CONFIGFS_BIN_ATTR_RW(_name) \ + __CONFIGFS_BIN_ATTR(_name, (S_IWUSR | S_IRUGO), \ + _name##_read, _name##_write) + +#define CONFIGFS_BIN_ATTR(_name, _mode, _read, _write) \ +struct configfs_bin_attribute bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR(_name, _mode, _read, _write) + +#define CONFIGFS_BIN_ATTR_RO(_name) \ +struct configfs_bin_attribute bin_attr_##_name = \ + __CONFIGFS_BIN_ATTR_RO(_name) + +#define CONFIGFS_BIN_ATTR_OPS(_item) \ +static ssize_t _item##_bin_attr_read(struct config_item *item, \ + struct configfs_bin_attribute *bin_attr, \ + void *buf, size_t max_count) \ +{ \ + struct _item *_item = to_##_item(item); \ + struct _item##_bin_attribute *_item##_bin_attr = \ + container_of(bin_attr, struct _item##_bin_attribute, \ + bin_attr); \ + ssize_t ret = 0; \ + \ + if (_item##_bin_attr->read) \ + ret = _item##_bin_attr->read(_item, buf, max_count); \ + return ret; \ +} \ +static ssize_t _item##_bin_attr_write(struct config_item *item, \ + struct configfs_bin_attribute *bin_attr, \ + const void *buf, size_t count) \ +{ \ + struct _item *_item = to_##_item(item); \ + struct _item##_bin_attribute *_item##_bin_attr = \ + container_of(bin_attr, struct _item##_bin_attribute, \ + bin_attr); \ + ssize_t ret = -EINVAL; \ + \ + if (_item##_bin_attr->write) \ + ret = _item##_bin_attr->write(_item, buf, count); \ + return ret; \ +} + /* * If allow_link() exists, the item can symlink(2) out to other * items. If the item is a group, it may support mkdir(2). @@ -225,6 +317,12 @@ struct configfs_item_operations { void (*release)(struct config_item *); ssize_t (*show_attribute)(struct config_item *, struct configfs_attribute *,char *); ssize_t (*store_attribute)(struct config_item *,struct configfs_attribute *,const char *, size_t); + ssize_t (*read_bin_attribute)(struct config_item *, + struct configfs_bin_attribute *, + void *, size_t); + ssize_t (*write_bin_attribute)(struct config_item *, + struct configfs_bin_attribute *, + const void *, size_t); int (*allow_link)(struct config_item *src, struct config_item *target); int (*drop_link)(struct config_item *src, struct config_item *target); }; diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h new file mode 100644 index 0000000000000..9bb77d3ed6e0c --- /dev/null +++ b/include/linux/nvmem-consumer.h @@ -0,0 +1,157 @@ +/* + * nvmem framework consumer. + * + * Copyright (C) 2015 Srinivas Kandagatla + * Copyright (C) 2013 Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_NVMEM_CONSUMER_H +#define _LINUX_NVMEM_CONSUMER_H + +struct device; +struct device_node; +/* consumer cookie */ +struct nvmem_cell; +struct nvmem_device; + +struct nvmem_cell_info { + const char *name; + unsigned int offset; + unsigned int bytes; + unsigned int bit_offset; + unsigned int nbits; +}; + +#if IS_ENABLED(CONFIG_NVMEM) + +/* Cell based interface */ +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); +void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len); +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len); + +/* direct nvmem device read/write interface */ +struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); +struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); +void nvmem_device_put(struct nvmem_device *nvmem); +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); +int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + +#else + +static inline struct nvmem_cell *nvmem_cell_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void devm_nvmem_cell_put(struct device *dev, + struct nvmem_cell *cell) +{ + +} +static inline void nvmem_cell_put(struct nvmem_cell *cell) +{ +} + +static inline char *nvmem_cell_read(struct nvmem_cell *cell, size_t *len) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int nvmem_cell_write(struct nvmem_cell *cell, + const char *buf, size_t len) +{ + return -ENOSYS; +} + +static inline struct nvmem_device *nvmem_device_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void nvmem_device_put(struct nvmem_device *nvmem) +{ +} + +static inline void devm_nvmem_device_put(struct device *dev, + struct nvmem_device *nvmem) +{ +} + +static inline ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_read(struct nvmem_device *nvmem, + unsigned int offset, size_t bytes, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_write(struct nvmem_device *nvmem, + unsigned int offset, size_t bytes, + void *buf) +{ + return -ENOSYS; +} +#endif /* CONFIG_NVMEM */ + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name); +struct nvmem_device *of_nvmem_device_get(struct device_node *np, + const char *name); +#else +static inline struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_device *of_nvmem_device_get(struct device_node *np, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} +#endif /* CONFIG_NVMEM && CONFIG_OF */ + +#endif /* ifndef _LINUX_NVMEM_CONSUMER_H */ diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h new file mode 100644 index 0000000000000..0b68caff1b3c5 --- /dev/null +++ b/include/linux/nvmem-provider.h @@ -0,0 +1,47 @@ +/* + * nvmem framework provider. + * + * Copyright (C) 2015 Srinivas Kandagatla + * Copyright (C) 2013 Maxime Ripard + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_NVMEM_PROVIDER_H +#define _LINUX_NVMEM_PROVIDER_H + +struct nvmem_device; +struct nvmem_cell_info; + +struct nvmem_config { + struct device *dev; + const char *name; + int id; + struct module *owner; + const struct nvmem_cell_info *cells; + int ncells; + bool read_only; +}; + +#if IS_ENABLED(CONFIG_NVMEM) + +struct nvmem_device *nvmem_register(const struct nvmem_config *cfg); +int nvmem_unregister(struct nvmem_device *nvmem); + +#else + +static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int nvmem_unregister(struct nvmem_device *nvmem) +{ + return -ENOSYS; +} + +#endif /* CONFIG_NVMEM */ + +#endif /* ifndef _LINUX_NVMEM_PROVIDER_H */ diff --git a/include/linux/of.h b/include/linux/of.h index b871ff9d81d72..7975c656defd8 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -1028,6 +1028,27 @@ static inline int of_changeset_update_property(struct of_changeset *ocs, { return of_changeset_action(ocs, OF_RECONFIG_UPDATE_PROPERTY, np, prop); } + +struct device_node *of_changeset_create_device_nodev( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, va_list vargs); +__printf(3, 4) struct device_node *of_changeset_create_device_node( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, ...); +int of_changeset_add_property_copy(struct of_changeset *ocs, + struct device_node *np, const char *name, + const void *value, int length); +int of_changeset_add_property_string(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *str); +__printf(4, 5) int of_changeset_add_property_stringf(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *fmt, ...); +int of_changeset_add_property_string_list(struct of_changeset *ocs, + struct device_node *np, const char *name, const char **strs, int count); +int of_changeset_add_property_u32(struct of_changeset *ocs, + struct device_node *np, const char *name, u32 val); +int of_changeset_add_property_bool(struct of_changeset *ocs, + struct device_node *np, const char *name); + #else /* CONFIG_OF_DYNAMIC */ static inline int of_reconfig_notifier_register(struct notifier_block *nb) { @@ -1047,6 +1068,58 @@ static inline int of_reconfig_get_state_change(unsigned long action, { return -EINVAL; } + +static inline int of_changeset_create_device_node(struct of_changeset *ocs, + struct device_node *parent, const char *fmt, ...) +{ + return -EINVAL; +} + +int of_changeset_add_property_copy(struct of_changeset *ocs, + struct device_node *np, const char *name, + const void *value, int length) +{ + return -EINVAL; +} + +int of_changeset_add_property_string(struct of_changeset *ocs, + struct device_node *np, const char *name, const char *str) +{ + return -EINVAL; +} + +static inline struct device_node *of_changeset_create_device_nodev( + struct of_changeset *ocs, struct device_node *parent, + const char *fmt, va_list vargs) +{ + return ERR_PTR(-EINVAL); +} + +static inline __printf(4, 5) struct device_node * + of_changeset_add_property_stringf( + struct of_changeset *ocs, struct device_node *np, + const char *name, const char *fmt, ...) +{ + return ERR_PTR(-EINVAL); +} + +int of_changeset_add_property_string_list(struct of_changeset *ocs, + struct device_node *np, const char *name, const char **strs, int count) +{ + return -EINVAL; +} + +int of_changeset_add_property_u32(struct of_changeset *ocs, + struct device_node *np, const char *name, u32 val) +{ + return -EINVAL; +} + +int of_changeset_add_property_bool(struct of_changeset *ocs, + struct device_node *np, const char *name) +{ + return -EINVAL; +} #endif /* CONFIG_OF_DYNAMIC */ /* CONFIG_OF_RESOLVE api */ @@ -1074,6 +1147,10 @@ int of_overlay_create(struct device_node *tree); int of_overlay_destroy(int id); int of_overlay_destroy_all(void); +int of_overlay_create_indirect(struct device_node *tree, const char *id); +int of_overlay_create_target_root(struct device_node *tree, + struct device_node *target_root); + #else static inline int of_overlay_create(struct device_node *tree) @@ -1091,6 +1168,18 @@ static inline int of_overlay_destroy_all(void) return -ENOTSUPP; } +static inline int of_overlay_create_indirect(struct device_node *tree, + const char *id) +{ + return -ENOTSUPP; +} + +static inline int of_overlay_create_target_root(struct device_node *tree, + struct device_node *target_root) +{ + return -ENOTSUPP; +} + #endif #endif /* _LINUX_OF_H */ diff --git a/include/linux/platform_data/sgx-omap.h b/include/linux/platform_data/sgx-omap.h new file mode 100644 index 0000000000000..aa59b2c9e5ff4 --- /dev/null +++ b/include/linux/platform_data/sgx-omap.h @@ -0,0 +1,22 @@ +/* + * SGX Graphics Driver Platform Data + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Darren Etheridge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include + +struct gfx_sgx_platform_data { + const char *reset_name; + + int (*deassert_reset)(struct platform_device *pdev, const char *name); +}; diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 116655d922691..59c55ea0f0b50 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -433,6 +433,8 @@ int regmap_update_bits_check_async(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val, bool *change); int regmap_get_val_bytes(struct regmap *map); +int regmap_get_max_register(struct regmap *map); +int regmap_get_reg_stride(struct regmap *map); int regmap_async_complete(struct regmap *map); bool regmap_can_raw_write(struct regmap *map); @@ -676,6 +678,18 @@ static inline int regmap_get_val_bytes(struct regmap *map) return -EINVAL; } +static inline int regmap_get_max_register(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_get_reg_stride(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regcache_sync(struct regmap *map) { WARN_ONCE(1, "regmap API is disabled"); diff --git a/lib/vsprintf.c b/lib/vsprintf.c index da39c608a28cb..10f44aa7c3c7b 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -30,6 +30,7 @@ #include #include #include +#include #include /* for PAGE_SIZE */ #include /* for dereference_function_descriptor() */ @@ -1360,6 +1361,141 @@ char *clock(char *buf, char *end, struct clk *clk, struct printf_spec spec, } } +/* helper method for calculating extends on first pass and filling in later */ +static noinline_for_stack +void append_str(const char *str, int pass, int *lenp, char **bufp, char *end) +{ + int len; + + len = strlen(str); + if (pass == 1) + *lenp += len; + else { + if (len > (end - *bufp)) + len = end - *bufp; + memcpy(*bufp, str, len); + *bufp += len; + } +} + +static noinline_for_stack +char *device_node_string(char *buf, char *end, struct device_node *dn, + struct printf_spec spec, const char *fmt) +{ + char tbuf[sizeof("xxxxxxxxxx") + 1]; + const char *fmtp, *p; + int len, ret, i, j, pass; + char c; + + if (!IS_ENABLED(CONFIG_OF)) { + /* if OF is not enabled just print the pointer */ + spec.flags |= SMALL; + if (spec.field_width == -1) { + spec.field_width = 2 * sizeof(void *); + spec.flags |= ZEROPAD; + } + spec.base = 16; + return number(buf, end, (unsigned long) dn, spec); + } + + if ((unsigned long)dn < PAGE_SIZE) + return string(buf, end, "(null)", spec); + + /* simple case without anything any more format specifiers */ + if (fmt[1] == '\0' || isspace(fmt[1])) + fmt = "Of"; + + len = 0; + + /* two passes; the first calculates length, the second fills in */ + for (pass = 1; pass <= 2; pass++) { + if (pass == 2 && !(spec.flags & LEFT)) { + /* padding */ + while (len < spec.field_width--) { + if (buf < end) + *buf = ' '; + ++buf; + } + } + + for (fmtp = fmt + 1, j = 0; (c = *fmtp++) != '\0'; ) { + + /* validate option */ + if (c != 'f' && c != 'n' && c != 'p' && c != 'P' && + c != 'F' && c != 'c' && c != 'C' && c != 'r') + continue; + + /* handle separator */ + if (j++ > 0) + append_str("|", pass, &len, &buf, end); + + switch (c) { + case 'f': /* full_name */ + append_str(of_node_full_name(dn), pass, &len, + &buf, end); + break; + case 'n': /* name */ + append_str(dn->name, pass, &len, &buf, end); + break; + case 'p': /* phandle */ + snprintf(tbuf, sizeof(tbuf), "%u", + (unsigned int)dn->phandle); + append_str(tbuf, pass, &len, &buf, end); + break; + case 'P': /* path-spec */ + append_str(dn->name, pass, &len, &buf, end); + /* need to tack on the @ postfix */ + p = strchr(of_node_full_name(dn), '@'); + if (p) + append_str(p, pass, &len, &buf, end); + break; + case 'F': /* flags */ + snprintf(tbuf, sizeof(tbuf), "%c%c%c%c", + of_node_check_flag(dn, OF_DYNAMIC) ? + 'D' : '-', + of_node_check_flag(dn, OF_DETACHED) ? + 'd' : '-', + of_node_check_flag(dn, OF_POPULATED) ? + 'P' : '-', + of_node_check_flag(dn, + OF_POPULATED_BUS) ? 'B' : '-'); + append_str(tbuf, pass, &len, &buf, end); + break; + case 'c': /* major compatible string */ + ret = of_property_read_string(dn, "compatible", + &p); + if (ret == 0) + append_str(p, pass, &len, &buf, end); + break; + case 'C': /* full compatible string */ + i = 0; + while (of_property_read_string_index(dn, + "compatible", i, &p) == 0) { + append_str(i == 0 ? "\"" : "\",\"", + pass, &len, &buf, end); + append_str(p, pass, &len, &buf, end); + i++; + } + if (i > 0) + append_str("\"", pass, &len, &buf, end); + break; + case 'r': /* node reference count */ + snprintf(tbuf, sizeof(tbuf), "%u", + atomic_read(&dn->kobj.kref.refcount)); + append_str(tbuf, pass, &len, &buf, end); + break; + default: + break; + } + } + } + /* finish up */ + while (buf < end && len < spec.field_width--) + *buf++ = ' '; + + return buf; +} + int kptr_restrict __read_mostly; /* @@ -1447,6 +1583,16 @@ int kptr_restrict __read_mostly; * - 'Cn' For a clock, it prints the name (Common Clock Framework) or address * (legacy clock framework) of the clock * - 'Cr' For a clock, it prints the current rate of the clock + * - 'O[fnpPcCFr]' For an DT device node + * Without any optional arguments prints the full_name + * f device node full_name + * n device node name + * p device node phandle + * P device node path spec (name + @unit) + * F device node flags + * c major compatible string + * C full compatible string + * r node reference count * * Note: The difference between 'S' and 'F' is that on ia64 and ppc64 * function pointers are really function descriptors, which contain a @@ -1597,6 +1743,8 @@ char *pointer(const char *fmt, char *buf, char *end, void *ptr, return dentry_name(buf, end, ((const struct file *)ptr)->f_path.dentry, spec, fmt); + case 'O': + return device_node_string(buf, end, ptr, spec, fmt); } spec.flags |= SMALL; if (spec.field_width == -1) { diff --git a/makedts b/makedts new file mode 100755 index 0000000000000..54ec8e5984481 --- /dev/null +++ b/makedts @@ -0,0 +1,93 @@ +############################################################################### +## ## +## File: makedts ## +## Author: Alison Chaiken ## +## Created: Fri Oct 18 03:57:20 BST 2013 ## +## Contents: Run dtc on a single device-tree source, invoking the ## +## C-preprocessor if appropriate, and processing all dependencies, ## +## to produce a single human-readable ASCII output. Output is ## +## similar to fdtdump except that it operates on source files and ## +## emits strings as characters rather than hex equivalents. ## +## ## +## Copyright (c) 2013 Mentor Graphics. ## +## ## +## This program is free software; you can redistribute it and/or ## +## modify it under the terms of the GNU General Public License as ## +## published by the Free Software Foundation; either version 2 of ## +## the License, or (at your option) any later version. ## +## ## +############################################################################### + +#!/bin/bash + +CC=arm-linux-gnueabihf-gcc +SRCARCH=arm +BASE=`basename $1 .dts` +DTC_CPP_FLAGS="-E -Wp,-MD,$BASE.pre.tmp -nostdinc -Iarch/$SRCARCH/boot/dts -Iarch/$SRCARCH/boot/dts/include -undef -D__DTS__ -x assembler-with-cpp" + +function usage() +{ + echo "" + echo "makedts compiles a top-level 'board file' device-tree source file " + echo "by processing all its dependencies and producing output with the suffix .out.dts." + echo "" + echo "Run this script from the kernel top-level source directory and " + echo "provide the name of one device-tree file to preprocess." + exit 1 +} + +function calc_kernel_version() +{ + VERSION=0 + VERSION=`head -1 Makefile | awk {'print $3;'}` + PATCHLEVEL=`grep PATCHLEVEL Makefile | head -1 | awk {'print $3;'}` + SUBLEVEL=`grep SUBLEVEL Makefile | head -1 | awk {'print $3;'}` + EXTRAVERSION=`grep EXTRAVERSION Makefile | head -1 | awk {'print $3;'}` + + if [[ $VERSION -eq 0 ]] + then + usage + fi + + KERNELVERSION_HUMAN=$VERSION.$PATCHLEVEL.$SUBLEVEL$EXTRAVERSION + return $KERNELVERSION_HUMAN +} + +if [[ $# -ne 1 ]] ; then + usage +fi + +if ( [ ! -d arch ] || [ ! -d scripts ] ) ; then + usage +fi + +calc_kernel_version +echo "KERNELVERSION_HUMAN is $KERNELVERSION_HUMAN" +KERNELVERSION=`expr $VERSION \* 65536 + $PATCHLEVEL \* 256 + $SUBLEVEL ` +echo "KERNELVERSION is $KERNELVERSION" + +# CPP support in dtc first appeared in 3.7: (+ (* 3 65536) (* 7 256)) 198400 +if [[ $KERNELVERSION -lt 198400 ]] + then + echo "Older kernel: no cpp invocation." + scripts/dtc/dtc -O dts -o $BASE.out.dts $1 + echo "Produced $BASE.out.dts" + exit 0 +fi + +$CC $DTC_CPP_FLAGS -o $BASE.tmp $1 + +if [[ $? -ne 0 ]] + then + echo "C preprocessor parsing of DTS failed." + exit +fi + +scripts/dtc/dtc -O dts -o $BASE.out.dts -b 0 -i arch/arm/boot/dts -d $BASE.dtc.tmp $BASE.tmp + +if [[ $? -eq 0 ]] + then + echo "Produced $BASE.out.dts" +fi + +#rm *.tmp diff --git a/scripts/dtc/checks.c b/scripts/dtc/checks.c index ee96a2519eff6..c0326d1e95192 100644 --- a/scripts/dtc/checks.c +++ b/scripts/dtc/checks.c @@ -53,7 +53,7 @@ struct check { void *data; bool warn, error; enum checkstatus status; - int inprogress; + bool inprogress; int num_prereqs; struct check **prereq; }; @@ -113,6 +113,7 @@ static inline void check_msg(struct check *c, const char *fmt, ...) vfprintf(stderr, fmt, ap); fprintf(stderr, "\n"); } + va_end(ap); } #define FAIL(c, ...) \ @@ -141,9 +142,9 @@ static void check_nodes_props(struct check *c, struct node *dt, struct node *nod check_nodes_props(c, dt, child); } -static int run_check(struct check *c, struct node *dt) +static bool run_check(struct check *c, struct node *dt) { - int error = 0; + bool error = false; int i; assert(!c->inprogress); @@ -151,11 +152,11 @@ static int run_check(struct check *c, struct node *dt) if (c->status != UNCHECKED) goto out; - c->inprogress = 1; + c->inprogress = true; for (i = 0; i < c->num_prereqs; i++) { struct check *prq = c->prereq[i]; - error |= run_check(prq, dt); + error = error || run_check(prq, dt); if (prq->status != PASSED) { c->status = PREREQ; check_msg(c, "Failed prerequisite '%s'", @@ -177,9 +178,9 @@ static int run_check(struct check *c, struct node *dt) TRACE(c, "\tCompleted, status %d", c->status); out: - c->inprogress = 0; + c->inprogress = false; if ((c->status != PASSED) && (c->error)) - error = 1; + error = true; return error; } @@ -457,6 +458,8 @@ static void fixup_phandle_references(struct check *c, struct node *dt, struct node *node, struct property *prop) { struct marker *m = prop->val.markers; + struct fixup *f, **fp; + struct fixup_entry *fe, **fep; struct node *refnode; cell_t phandle; @@ -465,14 +468,73 @@ static void fixup_phandle_references(struct check *c, struct node *dt, refnode = get_node_by_ref(dt, m->ref); if (! refnode) { - FAIL(c, "Reference to non-existent node or label \"%s\"\n", - m->ref); + if (!dt->is_plugin) { + FAIL(c, "Reference to non-existent node or label \"%s\"\n", + m->ref); + continue; + } + + /* allocate fixup entry */ + fe = xmalloc(sizeof(*fe)); + + fe->node = node; + fe->prop = prop; + fe->offset = m->offset; + fe->next = NULL; + + /* search for an already existing fixup */ + for_each_fixup(dt, f) + if (strcmp(f->ref, m->ref) == 0) + break; + + /* no fixup found, add new */ + if (f == NULL) { + f = xmalloc(sizeof(*f)); + f->ref = m->ref; + f->entries = NULL; + f->next = NULL; + + /* add it to the tree */ + fp = &dt->fixups; + while (*fp) + fp = &(*fp)->next; + *fp = f; + } + + /* and now append fixup entry */ + fep = &f->entries; + while (*fep) + fep = &(*fep)->next; + *fep = fe; + + /* mark the entry as unresolved */ + *((cell_t *)(prop->val.val + m->offset)) = + cpu_to_fdt32(0xdeadbeef); continue; } + /* if it's a local reference, we need to record it */ + if (symbol_fixup_support) { + + /* allocate a new local fixup entry */ + fe = xmalloc(sizeof(*fe)); + + fe->node = node; + fe->prop = prop; + fe->offset = m->offset; + fe->next = NULL; + + /* append it to the local fixups */ + fep = &dt->local_fixups; + while (*fep) + fep = &(*fep)->next; + *fep = fe; + } + phandle = get_node_phandle(dt, refnode); *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle); } + } ERROR(phandle_references, NULL, NULL, fixup_phandle_references, NULL, &duplicate_node_names, &explicit_phandles); @@ -559,7 +621,7 @@ static void check_reg_format(struct check *c, struct node *dt, size_cells = node_size_cells(node->parent); entrylen = (addr_cells + size_cells) * sizeof(cell_t); - if ((prop->val.len % entrylen) != 0) + if (!entrylen || (prop->val.len % entrylen) != 0) FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) " "(#address-cells == %d, #size-cells == %d)", node->fullpath, prop->val.len, addr_cells, size_cells); @@ -624,11 +686,11 @@ static void check_avoid_default_addr_size(struct check *c, struct node *dt, if (!reg && !ranges) return; - if ((node->parent->addr_cells == -1)) + if (node->parent->addr_cells == -1) FAIL(c, "Relying on default #address-cells value for %s", node->fullpath); - if ((node->parent->size_cells == -1)) + if (node->parent->size_cells == -1) FAIL(c, "Relying on default #size-cells value for %s", node->fullpath); } @@ -651,6 +713,45 @@ static void check_obsolete_chosen_interrupt_controller(struct check *c, } TREE_WARNING(obsolete_chosen_interrupt_controller, NULL); +static void check_auto_label_phandles(struct check *c, struct node *dt, + struct node *node) +{ + struct label *l; + struct symbol *s, **sp; + int has_label; + + if (!symbol_fixup_support) + return; + + has_label = 0; + for_each_label(node->labels, l) { + has_label = 1; + break; + } + + if (!has_label) + return; + + /* force allocation of a phandle for this node */ + (void)get_node_phandle(dt, node); + + /* add the symbol */ + for_each_label(node->labels, l) { + + s = xmalloc(sizeof(*s)); + s->label = l; + s->node = node; + s->next = NULL; + + /* add it to the symbols list */ + sp = &dt->symbols; + while (*sp) + sp = &((*sp)->next); + *sp = s; + } +} +NODE_WARNING(auto_label_phandles, NULL); + static struct check *check_table[] = { &duplicate_node_names, &duplicate_property_names, &node_name_chars, &node_name_format, &property_name_chars, @@ -669,6 +770,8 @@ static struct check *check_table[] = { &avoid_default_addr_size, &obsolete_chosen_interrupt_controller, + &auto_label_phandles, + &always_fail, }; @@ -706,15 +809,15 @@ static void disable_warning_error(struct check *c, bool warn, bool error) c->error = c->error && !error; } -void parse_checks_option(bool warn, bool error, const char *optarg) +void parse_checks_option(bool warn, bool error, const char *arg) { int i; - const char *name = optarg; + const char *name = arg; bool enable = true; - if ((strncmp(optarg, "no-", 3) == 0) - || (strncmp(optarg, "no_", 3) == 0)) { - name = optarg + 3; + if ((strncmp(arg, "no-", 3) == 0) + || (strncmp(arg, "no_", 3) == 0)) { + name = arg + 3; enable = false; } @@ -733,7 +836,7 @@ void parse_checks_option(bool warn, bool error, const char *optarg) die("Unrecognized check name \"%s\"\n", name); } -void process_checks(int force, struct boot_info *bi) +void process_checks(bool force, struct boot_info *bi) { struct node *dt = bi->dt; int i; diff --git a/scripts/dtc/data.c b/scripts/dtc/data.c index 4a40c5b92474f..8cae23746882e 100644 --- a/scripts/dtc/data.c +++ b/scripts/dtc/data.c @@ -74,7 +74,7 @@ struct data data_copy_escape_string(const char *s, int len) struct data d; char *q; - d = data_grow_for(empty_data, strlen(s)+1); + d = data_grow_for(empty_data, len + 1); q = d.val; while (i < len) { @@ -250,20 +250,20 @@ struct data data_add_marker(struct data d, enum markertype type, char *ref) return data_append_markers(d, m); } -int data_is_one_string(struct data d) +bool data_is_one_string(struct data d) { int i; int len = d.len; if (len == 0) - return 0; + return false; for (i = 0; i < len-1; i++) if (d.val[i] == '\0') - return 0; + return false; if (d.val[len-1] != '\0') - return 0; + return false; - return 1; + return true; } diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l index 3b41bfca636ce..dd44ba2aa11d0 100644 --- a/scripts/dtc/dtc-lexer.l +++ b/scripts/dtc/dtc-lexer.l @@ -20,7 +20,6 @@ %option noyywrap nounput noinput never-interactive -%x INCLUDE %x BYTESTRING %x PROPNODENAME %s V1 @@ -40,6 +39,7 @@ LINECOMMENT "//".*\n #include "dtc-parser.tab.h" YYLTYPE yylloc; +extern bool treesource_error; /* CAUTION: this will stop working if we ever use yyless() or yyunput() */ #define YY_USER_ACTION \ @@ -61,7 +61,8 @@ static int dts_version = 1; BEGIN(V1); \ static void push_input_file(const char *filename); -static int pop_input_file(void); +static bool pop_input_file(void); +static void lexical_error(const char *fmt, ...); %} %% @@ -75,11 +76,11 @@ static int pop_input_file(void); char *line, *tmp, *fn; /* skip text before line # */ line = yytext; - while (!isdigit(*line)) + while (!isdigit((unsigned char)*line)) line++; /* skip digits in line # */ tmp = line; - while (!isspace(*tmp)) + while (!isspace((unsigned char)*tmp)) tmp++; /* "NULL"-terminate line # */ *tmp = '\0'; @@ -112,6 +113,11 @@ static int pop_input_file(void); return DT_V1; } +<*>"/plugin/" { + DPRINT("Keyword: /plugin/\n"); + return DT_PLUGIN; + } + <*>"/memreserve/" { DPRINT("Keyword: /memreserve/\n"); BEGIN_DEFAULT(); @@ -146,15 +152,42 @@ static int pop_input_file(void); } ([0-9]+|0[xX][0-9a-fA-F]+)(U|L|UL|LL|ULL)? { - yylval.literal = xstrdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); + char *e; + DPRINT("Integer Literal: '%s'\n", yytext); + + errno = 0; + yylval.integer = strtoull(yytext, &e, 0); + + assert(!(*e) || !e[strspn(e, "UL")]); + + if (errno == ERANGE) + lexical_error("Integer literal '%s' out of range", + yytext); + else + /* ERANGE is the only strtoull error triggerable + * by strings matching the pattern */ + assert(errno == 0); return DT_LITERAL; } <*>{CHAR_LITERAL} { - yytext[yyleng-1] = '\0'; - yylval.literal = xstrdup(yytext+1); - DPRINT("Character literal: %s\n", yylval.literal); + struct data d; + DPRINT("Character literal: %s\n", yytext); + + d = data_copy_escape_string(yytext+1, yyleng-2); + if (d.len == 1) { + lexical_error("Empty character literal"); + yylval.integer = 0; + return DT_CHAR_LITERAL; + } + + yylval.integer = (unsigned char)d.val[0]; + + if (d.len > 2) + lexical_error("Character literal has %d" + " characters instead of 1", + d.len - 1); + return DT_CHAR_LITERAL; } @@ -164,7 +197,7 @@ static int pop_input_file(void); return DT_REF; } -<*>"&{/"{PATHCHAR}+\} { /* new-style path reference */ +<*>"&{/"{PATHCHAR}*\} { /* new-style path reference */ yytext[yyleng-1] = '\0'; DPRINT("Ref: %s\n", yytext+2); yylval.labelref = xstrdup(yytext+2); @@ -238,13 +271,24 @@ static void push_input_file(const char *filename) } -static int pop_input_file(void) +static bool pop_input_file(void) { if (srcfile_pop() == 0) - return 0; + return false; yypop_buffer_state(); yyin = current_srcfile->f; - return 1; + return true; +} + +static void lexical_error(const char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + srcpos_verror(&yylloc, "Lexical error", fmt, ap); + va_end(ap); + + treesource_error = true; } diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped index 2d30f41778b72..705c47db82697 100644 --- a/scripts/dtc/dtc-lexer.lex.c_shipped +++ b/scripts/dtc/dtc-lexer.lex.c_shipped @@ -9,7 +9,7 @@ #define FLEX_SCANNER #define YY_FLEX_MAJOR_VERSION 2 #define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 35 +#define YY_FLEX_SUBMINOR_VERSION 39 #if YY_FLEX_SUBMINOR_VERSION > 0 #define FLEX_BETA #endif @@ -162,7 +162,12 @@ typedef unsigned int flex_uint32_t; typedef struct yy_buffer_state *YY_BUFFER_STATE; #endif -extern int yyleng; +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef size_t yy_size_t; +#endif + +extern yy_size_t yyleng; extern FILE *yyin, *yyout; @@ -171,6 +176,7 @@ extern FILE *yyin, *yyout; #define EOB_ACT_LAST_MATCH 2 #define YY_LESS_LINENO(n) + #define YY_LINENO_REWIND_TO(ptr) /* Return all but the first "n" matched characters back to the input stream. */ #define yyless(n) \ @@ -188,11 +194,6 @@ extern FILE *yyin, *yyout; #define unput(c) yyunput( c, (yytext_ptr) ) -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - #ifndef YY_STRUCT_YY_BUFFER_STATE #define YY_STRUCT_YY_BUFFER_STATE struct yy_buffer_state @@ -210,7 +211,7 @@ struct yy_buffer_state /* Number of characters read into yy_ch_buf, not including EOB * characters. */ - int yy_n_chars; + yy_size_t yy_n_chars; /* Whether we "own" the buffer - i.e., we know we created it, * and can realloc() it to grow it, and should free() it to @@ -280,8 +281,8 @@ static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ /* yy_hold_char holds the character lost when yytext is formed. */ static char yy_hold_char; -static int yy_n_chars; /* number of characters read into yy_ch_buf */ -int yyleng; +static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ +yy_size_t yyleng; /* Points to current character in buffer. */ static char *yy_c_buf_p = (char *) 0; @@ -309,7 +310,7 @@ static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); -YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); void *yyalloc (yy_size_t ); void *yyrealloc (void *,yy_size_t ); @@ -341,7 +342,7 @@ void yyfree (void * ); /* Begin user sect3 */ -#define yywrap(n) 1 +#define yywrap() 1 #define YY_SKIP_YYWRAP typedef unsigned char YY_CHAR; @@ -372,8 +373,8 @@ static void yy_fatal_error (yyconst char msg[] ); *yy_cp = '\0'; \ (yy_c_buf_p) = yy_cp; -#define YY_NUM_RULES 30 -#define YY_END_OF_BUFFER 31 +#define YY_NUM_RULES 31 +#define YY_END_OF_BUFFER 32 /* This struct is not used in this scanner, but its presence is necessary. */ struct yy_trans_info @@ -381,25 +382,26 @@ struct yy_trans_info flex_int32_t yy_verify; flex_int32_t yy_nxt; }; -static yyconst flex_int16_t yy_accept[161] = +static yyconst flex_int16_t yy_accept[166] = { 0, + 0, 0, 0, 0, 0, 0, 0, 0, 32, 30, + 19, 19, 30, 30, 30, 30, 30, 30, 30, 30, + 30, 30, 30, 30, 30, 30, 16, 17, 17, 30, + 17, 11, 11, 19, 27, 0, 3, 0, 28, 13, + 0, 0, 12, 0, 0, 0, 0, 0, 0, 0, + 0, 22, 24, 26, 25, 23, 0, 10, 29, 0, + 0, 0, 15, 15, 17, 17, 17, 11, 11, 11, + 0, 13, 0, 12, 0, 0, 0, 21, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 17, 11, 11, + 11, 0, 14, 20, 0, 0, 0, 0, 0, 0, + + 0, 0, 0, 0, 17, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 17, 7, 0, 0, 0, + 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 4, 18, 0, 0, 5, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 31, 29, 18, 18, 29, 29, 29, 29, 29, 29, - 29, 29, 29, 29, 29, 29, 29, 29, 15, 16, - 16, 29, 16, 10, 10, 18, 26, 0, 3, 0, - 27, 12, 0, 0, 11, 0, 0, 0, 0, 0, - 0, 0, 21, 23, 25, 24, 22, 0, 9, 28, - 0, 0, 0, 14, 14, 16, 16, 16, 10, 10, - 10, 0, 12, 0, 11, 0, 0, 0, 20, 0, - 0, 0, 0, 0, 0, 0, 0, 16, 10, 10, - 10, 0, 19, 0, 0, 0, 0, 0, 0, 0, - - 0, 0, 16, 13, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 16, 6, 0, 0, 0, 0, 0, - 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, - 4, 17, 0, 0, 2, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, - 0, 0, 5, 8, 0, 0, 0, 0, 7, 0 + 0, 0, 1, 0, 0, 0, 0, 6, 9, 0, + 0, 0, 0, 8, 0 } ; static yyconst flex_int32_t yy_ec[256] = @@ -415,9 +417,9 @@ static yyconst flex_int32_t yy_ec[256] = 22, 22, 22, 22, 24, 22, 22, 25, 22, 22, 1, 26, 27, 1, 22, 1, 21, 28, 29, 30, - 31, 21, 22, 22, 32, 22, 22, 33, 34, 35, - 36, 37, 22, 38, 39, 40, 41, 42, 22, 25, - 43, 22, 44, 45, 46, 1, 1, 1, 1, 1, + 31, 21, 32, 22, 33, 22, 22, 34, 35, 36, + 37, 38, 22, 39, 40, 41, 42, 43, 22, 25, + 44, 22, 45, 46, 47, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, @@ -434,163 +436,165 @@ static yyconst flex_int32_t yy_ec[256] = 1, 1, 1, 1, 1 } ; -static yyconst flex_int32_t yy_meta[47] = +static yyconst flex_int32_t yy_meta[48] = { 0, 1, 1, 1, 1, 1, 1, 2, 3, 1, 2, 2, 2, 4, 5, 5, 5, 6, 1, 1, 1, 7, 8, 8, 8, 8, 1, 1, 7, 7, 7, 7, 8, 8, 8, 8, 8, 8, 8, 8, 8, - 8, 8, 8, 3, 1, 1 + 8, 8, 8, 8, 3, 1, 4 } ; -static yyconst flex_int16_t yy_base[175] = +static yyconst flex_int16_t yy_base[180] = { 0, - 0, 385, 378, 40, 41, 383, 72, 382, 34, 44, - 388, 393, 61, 117, 368, 116, 115, 115, 115, 48, - 367, 107, 368, 339, 127, 120, 0, 147, 393, 0, - 127, 0, 133, 156, 168, 153, 393, 125, 393, 380, - 393, 0, 369, 127, 393, 160, 371, 377, 347, 21, - 343, 346, 393, 393, 393, 393, 393, 359, 393, 393, - 183, 343, 339, 393, 356, 0, 183, 340, 187, 348, - 347, 0, 0, 0, 178, 359, 195, 365, 354, 326, - 332, 325, 334, 328, 204, 326, 331, 324, 393, 335, - 150, 311, 343, 342, 315, 322, 340, 179, 313, 207, - - 319, 316, 317, 393, 337, 333, 305, 302, 311, 301, - 310, 190, 338, 337, 393, 307, 322, 301, 305, 277, - 208, 311, 307, 278, 271, 270, 248, 246, 213, 130, - 393, 393, 263, 235, 207, 221, 218, 229, 213, 213, - 206, 234, 218, 210, 208, 193, 219, 393, 223, 204, - 176, 157, 393, 393, 120, 106, 97, 119, 393, 393, - 245, 251, 259, 263, 267, 273, 280, 284, 292, 300, - 304, 310, 318, 326 + 0, 393, 35, 392, 66, 391, 38, 107, 397, 401, + 55, 113, 377, 112, 111, 111, 114, 42, 376, 106, + 377, 347, 126, 120, 0, 147, 401, 0, 124, 0, + 137, 158, 170, 163, 401, 153, 401, 389, 401, 0, + 378, 120, 401, 131, 380, 386, 355, 139, 351, 355, + 351, 401, 401, 401, 401, 401, 367, 401, 401, 185, + 350, 346, 401, 364, 0, 185, 347, 189, 356, 355, + 0, 0, 330, 180, 366, 141, 372, 361, 332, 338, + 331, 341, 334, 326, 205, 331, 337, 329, 401, 341, + 167, 316, 401, 349, 348, 320, 328, 346, 180, 318, + + 324, 209, 324, 320, 322, 342, 338, 309, 306, 315, + 305, 315, 312, 192, 342, 341, 401, 293, 306, 282, + 268, 252, 255, 203, 285, 282, 272, 268, 252, 233, + 232, 239, 208, 107, 401, 401, 238, 211, 401, 211, + 212, 208, 228, 203, 215, 207, 233, 222, 212, 211, + 203, 227, 401, 237, 225, 204, 185, 401, 401, 149, + 128, 88, 42, 401, 401, 253, 259, 267, 271, 275, + 281, 288, 292, 300, 308, 312, 318, 326, 334 } ; -static yyconst flex_int16_t yy_def[175] = +static yyconst flex_int16_t yy_def[180] = { 0, - 160, 1, 1, 1, 1, 5, 160, 7, 1, 1, - 160, 160, 160, 160, 160, 161, 162, 163, 160, 160, - 160, 160, 164, 160, 160, 160, 165, 164, 160, 166, - 167, 166, 166, 160, 160, 160, 160, 161, 160, 161, - 160, 168, 160, 163, 160, 163, 169, 170, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 164, 160, 160, - 160, 160, 160, 160, 164, 166, 167, 166, 160, 160, - 160, 171, 168, 172, 163, 169, 169, 170, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 166, 160, 160, - 171, 172, 160, 160, 160, 160, 160, 160, 160, 160, - - 160, 160, 166, 160, 160, 160, 160, 160, 160, 160, - 160, 173, 160, 166, 160, 160, 160, 160, 160, 160, - 173, 160, 173, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 174, 160, 160, 160, 174, 160, 174, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 0, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160 + 165, 1, 1, 3, 165, 5, 1, 1, 165, 165, + 165, 165, 165, 166, 167, 168, 165, 165, 165, 165, + 169, 165, 165, 165, 170, 169, 165, 171, 172, 171, + 171, 165, 165, 165, 165, 166, 165, 166, 165, 173, + 165, 168, 165, 168, 174, 175, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 169, 165, 165, 165, + 165, 165, 165, 169, 171, 172, 171, 165, 165, 165, + 176, 173, 177, 168, 174, 174, 175, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 171, 165, 165, + 176, 177, 165, 165, 165, 165, 165, 165, 165, 165, + + 165, 165, 165, 165, 171, 165, 165, 165, 165, 165, + 165, 165, 165, 178, 165, 171, 165, 165, 165, 165, + 165, 165, 165, 178, 165, 178, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 179, 165, 165, + 165, 179, 165, 179, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 0, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165 } ; -static yyconst flex_int16_t yy_nxt[440] = +static yyconst flex_int16_t yy_nxt[449] = { 0, - 12, 13, 14, 13, 15, 16, 12, 17, 18, 12, - 12, 12, 19, 12, 12, 12, 12, 20, 21, 22, - 23, 23, 23, 23, 23, 12, 12, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 12, 24, 12, 25, 34, 35, 35, - 25, 81, 26, 26, 27, 27, 27, 34, 35, 35, - 82, 28, 36, 36, 36, 53, 54, 29, 28, 28, - 28, 28, 12, 13, 14, 13, 15, 16, 30, 17, - 18, 30, 30, 30, 26, 30, 30, 30, 12, 20, - 21, 22, 31, 31, 31, 31, 31, 32, 12, 31, - - 31, 31, 31, 31, 31, 31, 31, 31, 31, 31, - 31, 31, 31, 31, 31, 12, 24, 12, 36, 36, - 36, 39, 41, 45, 47, 56, 57, 48, 61, 47, - 39, 159, 48, 66, 61, 45, 66, 66, 66, 158, - 46, 40, 49, 59, 50, 157, 51, 49, 52, 50, - 40, 63, 46, 52, 36, 36, 36, 156, 43, 62, - 65, 65, 65, 59, 136, 68, 137, 65, 75, 69, - 69, 69, 70, 71, 65, 65, 65, 65, 70, 71, - 72, 69, 69, 69, 61, 46, 45, 155, 154, 66, - 70, 71, 66, 66, 66, 122, 85, 85, 85, 59, - - 69, 69, 69, 46, 77, 100, 109, 93, 100, 70, - 71, 110, 112, 122, 129, 123, 153, 85, 85, 85, - 135, 135, 135, 148, 148, 160, 135, 135, 135, 152, - 142, 142, 142, 123, 143, 142, 142, 142, 151, 143, - 150, 146, 145, 149, 149, 38, 38, 38, 38, 38, - 38, 38, 38, 42, 144, 141, 140, 42, 42, 44, - 44, 44, 44, 44, 44, 44, 44, 58, 58, 58, - 58, 64, 139, 64, 66, 138, 134, 66, 133, 66, - 66, 67, 132, 131, 67, 67, 67, 67, 73, 130, - 73, 73, 76, 76, 76, 76, 76, 76, 76, 76, - - 78, 78, 78, 78, 78, 78, 78, 78, 91, 160, - 91, 92, 129, 92, 92, 128, 92, 92, 121, 121, - 121, 121, 121, 121, 121, 121, 147, 147, 147, 147, - 147, 147, 147, 147, 127, 126, 125, 124, 61, 61, - 120, 119, 118, 117, 116, 115, 47, 114, 110, 113, - 111, 108, 107, 106, 48, 105, 104, 89, 103, 102, - 101, 99, 98, 97, 96, 95, 94, 79, 77, 90, - 89, 88, 59, 87, 86, 59, 84, 83, 80, 79, - 77, 74, 160, 60, 59, 55, 37, 160, 33, 25, - 26, 25, 11, 160, 160, 160, 160, 160, 160, 160, - - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160 + 10, 11, 12, 11, 13, 14, 10, 15, 16, 10, + 10, 10, 17, 10, 10, 10, 10, 18, 19, 20, + 21, 21, 21, 21, 21, 10, 10, 21, 21, 21, + 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, + 21, 21, 21, 21, 10, 22, 10, 24, 25, 25, + 25, 32, 33, 33, 164, 26, 34, 34, 34, 52, + 53, 27, 26, 26, 26, 26, 10, 11, 12, 11, + 13, 14, 28, 15, 16, 28, 28, 28, 24, 28, + 28, 28, 10, 18, 19, 20, 29, 29, 29, 29, + 29, 30, 10, 29, 29, 29, 29, 29, 29, 29, + + 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, + 10, 22, 10, 23, 34, 34, 34, 37, 39, 43, + 32, 33, 33, 45, 55, 56, 46, 60, 43, 45, + 65, 163, 46, 65, 65, 65, 44, 38, 60, 74, + 58, 47, 141, 48, 142, 44, 49, 47, 50, 48, + 76, 51, 62, 94, 50, 41, 44, 51, 37, 61, + 64, 64, 64, 58, 34, 34, 34, 64, 162, 80, + 67, 68, 68, 68, 64, 64, 64, 64, 38, 81, + 69, 70, 71, 68, 68, 68, 60, 161, 43, 69, + 70, 65, 69, 70, 65, 65, 65, 125, 85, 85, + + 85, 58, 68, 68, 68, 44, 102, 110, 125, 133, + 102, 69, 70, 111, 114, 160, 159, 126, 85, 85, + 85, 140, 140, 140, 140, 140, 140, 153, 126, 147, + 147, 147, 153, 148, 147, 147, 147, 158, 148, 165, + 157, 156, 155, 151, 150, 149, 146, 154, 145, 144, + 143, 139, 154, 36, 36, 36, 36, 36, 36, 36, + 36, 40, 138, 137, 136, 40, 40, 42, 42, 42, + 42, 42, 42, 42, 42, 57, 57, 57, 57, 63, + 135, 63, 65, 134, 165, 65, 133, 65, 65, 66, + 132, 131, 66, 66, 66, 66, 72, 130, 72, 72, + + 75, 75, 75, 75, 75, 75, 75, 75, 77, 77, + 77, 77, 77, 77, 77, 77, 91, 129, 91, 92, + 128, 92, 92, 127, 92, 92, 124, 124, 124, 124, + 124, 124, 124, 124, 152, 152, 152, 152, 152, 152, + 152, 152, 60, 60, 123, 122, 121, 120, 119, 118, + 117, 45, 116, 111, 115, 113, 112, 109, 108, 107, + 46, 106, 93, 89, 105, 104, 103, 101, 100, 99, + 98, 97, 96, 95, 78, 76, 93, 90, 89, 88, + 58, 87, 86, 58, 84, 83, 82, 79, 78, 76, + 73, 165, 59, 58, 54, 35, 165, 31, 23, 23, + + 9, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165 } ; -static yyconst flex_int16_t yy_chk[440] = +static yyconst flex_int16_t yy_chk[449] = { 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 4, 9, 9, 9, - 10, 50, 4, 5, 5, 5, 5, 10, 10, 10, - 50, 5, 13, 13, 13, 20, 20, 5, 5, 5, - 5, 5, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 14, 14, - 14, 16, 17, 18, 19, 22, 22, 19, 25, 26, - 38, 158, 26, 31, 33, 44, 31, 31, 31, 157, - 18, 16, 19, 31, 19, 156, 19, 26, 19, 26, - 38, 26, 44, 26, 36, 36, 36, 155, 17, 25, - 28, 28, 28, 28, 130, 33, 130, 28, 46, 34, - 34, 34, 91, 91, 28, 28, 28, 28, 34, 34, - 34, 35, 35, 35, 61, 46, 75, 152, 151, 67, - 35, 35, 67, 67, 67, 112, 61, 61, 61, 67, - - 69, 69, 69, 75, 77, 85, 98, 77, 100, 69, - 69, 98, 100, 121, 129, 112, 150, 85, 85, 85, - 135, 135, 135, 143, 147, 149, 129, 129, 129, 146, - 138, 138, 138, 121, 138, 142, 142, 142, 145, 142, - 144, 141, 140, 143, 147, 161, 161, 161, 161, 161, - 161, 161, 161, 162, 139, 137, 136, 162, 162, 163, - 163, 163, 163, 163, 163, 163, 163, 164, 164, 164, - 164, 165, 134, 165, 166, 133, 128, 166, 127, 166, - 166, 167, 126, 125, 167, 167, 167, 167, 168, 124, - 168, 168, 169, 169, 169, 169, 169, 169, 169, 169, - - 170, 170, 170, 170, 170, 170, 170, 170, 171, 123, - 171, 172, 122, 172, 172, 120, 172, 172, 173, 173, - 173, 173, 173, 173, 173, 173, 174, 174, 174, 174, - 174, 174, 174, 174, 119, 118, 117, 116, 114, 113, - 111, 110, 109, 108, 107, 106, 105, 103, 102, 101, - 99, 97, 96, 95, 94, 93, 92, 90, 88, 87, - 86, 84, 83, 82, 81, 80, 79, 78, 76, 71, - 70, 68, 65, 63, 62, 58, 52, 51, 49, 48, - 47, 43, 40, 24, 23, 21, 15, 11, 8, 6, - 3, 2, 160, 160, 160, 160, 160, 160, 160, 160, - - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160, 160, - 160, 160, 160, 160, 160, 160, 160, 160, 160 + 1, 1, 1, 1, 1, 1, 1, 3, 3, 3, + 3, 7, 7, 7, 163, 3, 11, 11, 11, 18, + 18, 3, 3, 3, 3, 3, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 8, 12, 12, 12, 14, 15, 16, + 8, 8, 8, 17, 20, 20, 17, 23, 42, 24, + 29, 162, 24, 29, 29, 29, 16, 14, 31, 44, + 29, 17, 134, 17, 134, 42, 17, 24, 17, 24, + 76, 17, 24, 76, 24, 15, 44, 24, 36, 23, + 26, 26, 26, 26, 34, 34, 34, 26, 161, 48, + 31, 32, 32, 32, 26, 26, 26, 26, 36, 48, + 32, 32, 32, 33, 33, 33, 60, 160, 74, 91, + 91, 66, 33, 33, 66, 66, 66, 114, 60, 60, + + 60, 66, 68, 68, 68, 74, 85, 99, 124, 133, + 102, 68, 68, 99, 102, 157, 156, 114, 85, 85, + 85, 133, 133, 133, 140, 140, 140, 148, 124, 143, + 143, 143, 152, 143, 147, 147, 147, 155, 147, 154, + 151, 150, 149, 146, 145, 144, 142, 148, 141, 138, + 137, 132, 152, 166, 166, 166, 166, 166, 166, 166, + 166, 167, 131, 130, 129, 167, 167, 168, 168, 168, + 168, 168, 168, 168, 168, 169, 169, 169, 169, 170, + 128, 170, 171, 127, 126, 171, 125, 171, 171, 172, + 123, 122, 172, 172, 172, 172, 173, 121, 173, 173, + + 174, 174, 174, 174, 174, 174, 174, 174, 175, 175, + 175, 175, 175, 175, 175, 175, 176, 120, 176, 177, + 119, 177, 177, 118, 177, 177, 178, 178, 178, 178, + 178, 178, 178, 178, 179, 179, 179, 179, 179, 179, + 179, 179, 116, 115, 113, 112, 111, 110, 109, 108, + 107, 106, 105, 104, 103, 101, 100, 98, 97, 96, + 95, 94, 92, 90, 88, 87, 86, 84, 83, 82, + 81, 80, 79, 78, 77, 75, 73, 70, 69, 67, + 64, 62, 61, 57, 51, 50, 49, 47, 46, 45, + 41, 38, 22, 21, 19, 13, 9, 6, 4, 2, + + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165, 165, 165, + 165, 165, 165, 165, 165, 165, 165, 165 } ; static yy_state_type yy_last_accepting_state; @@ -631,13 +635,13 @@ char *yytext; - -#line 38 "dtc-lexer.l" +#line 37 "dtc-lexer.l" #include "dtc.h" #include "srcpos.h" #include "dtc-parser.tab.h" YYLTYPE yylloc; +extern bool treesource_error; /* CAUTION: this will stop working if we ever use yyless() or yyunput() */ #define YY_USER_ACTION \ @@ -659,14 +663,14 @@ static int dts_version = 1; BEGIN(V1); \ static void push_input_file(const char *filename); -static int pop_input_file(void); -#line 664 "dtc-lexer.lex.c" +static bool pop_input_file(void); +static void lexical_error(const char *fmt, ...); +#line 669 "dtc-lexer.lex.c" #define INITIAL 0 -#define INCLUDE 1 -#define BYTESTRING 2 -#define PROPNODENAME 3 -#define V1 4 +#define BYTESTRING 1 +#define PROPNODENAME 2 +#define V1 3 #ifndef YY_NO_UNISTD_H /* Special case for "unistd.h", since it is non-ANSI. We include it way @@ -703,7 +707,7 @@ FILE *yyget_out (void ); void yyset_out (FILE * out_str ); -int yyget_leng (void ); +yy_size_t yyget_leng (void ); char *yyget_text (void ); @@ -852,10 +856,6 @@ YY_DECL register char *yy_cp, *yy_bp; register int yy_act; -#line 67 "dtc-lexer.l" - -#line 858 "dtc-lexer.lex.c" - if ( !(yy_init) ) { (yy_init) = 1; @@ -882,6 +882,11 @@ YY_DECL yy_load_buffer_state( ); } + { +#line 68 "dtc-lexer.l" + +#line 889 "dtc-lexer.lex.c" + while ( 1 ) /* loops until end-of-file is reached */ { yy_cp = (yy_c_buf_p); @@ -899,7 +904,7 @@ YY_DECL yy_match: do { - register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; if ( yy_accept[yy_current_state] ) { (yy_last_accepting_state) = yy_current_state; @@ -908,13 +913,13 @@ yy_match: while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) { yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 161 ) + if ( yy_current_state >= 166 ) yy_c = yy_meta[(unsigned int) yy_c]; } yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; ++yy_cp; } - while ( yy_current_state != 160 ); + while ( yy_current_state != 165 ); yy_cp = (yy_last_accepting_cpos); yy_current_state = (yy_last_accepting_state); @@ -937,7 +942,7 @@ do_action: /* This label is used only to access EOF actions. */ case 1: /* rule 1 can match eol */ YY_RULE_SETUP -#line 68 "dtc-lexer.l" +#line 69 "dtc-lexer.l" { char *name = strchr(yytext, '\"') + 1; yytext[yyleng-1] = '\0'; @@ -947,16 +952,16 @@ YY_RULE_SETUP case 2: /* rule 2 can match eol */ YY_RULE_SETUP -#line 74 "dtc-lexer.l" +#line 75 "dtc-lexer.l" { char *line, *tmp, *fn; /* skip text before line # */ line = yytext; - while (!isdigit(*line)) + while (!isdigit((unsigned char)*line)) line++; /* skip digits in line # */ tmp = line; - while (!isspace(*tmp)) + while (!isspace((unsigned char)*tmp)) tmp++; /* "NULL"-terminate line # */ *tmp = '\0'; @@ -970,11 +975,10 @@ YY_RULE_SETUP } YY_BREAK case YY_STATE_EOF(INITIAL): -case YY_STATE_EOF(INCLUDE): case YY_STATE_EOF(BYTESTRING): case YY_STATE_EOF(PROPNODENAME): case YY_STATE_EOF(V1): -#line 95 "dtc-lexer.l" +#line 96 "dtc-lexer.l" { if (!pop_input_file()) { yyterminate(); @@ -984,7 +988,7 @@ case YY_STATE_EOF(V1): case 3: /* rule 3 can match eol */ YY_RULE_SETUP -#line 101 "dtc-lexer.l" +#line 102 "dtc-lexer.l" { DPRINT("String: %s\n", yytext); yylval.data = data_copy_escape_string(yytext+1, @@ -994,7 +998,7 @@ YY_RULE_SETUP YY_BREAK case 4: YY_RULE_SETUP -#line 108 "dtc-lexer.l" +#line 109 "dtc-lexer.l" { DPRINT("Keyword: /dts-v1/\n"); dts_version = 1; @@ -1004,25 +1008,33 @@ YY_RULE_SETUP YY_BREAK case 5: YY_RULE_SETUP -#line 115 "dtc-lexer.l" +#line 116 "dtc-lexer.l" +{ + DPRINT("Keyword: /plugin/\n"); + return DT_PLUGIN; + } + YY_BREAK +case 6: +YY_RULE_SETUP +#line 121 "dtc-lexer.l" { DPRINT("Keyword: /memreserve/\n"); BEGIN_DEFAULT(); return DT_MEMRESERVE; } YY_BREAK -case 6: +case 7: YY_RULE_SETUP -#line 121 "dtc-lexer.l" +#line 127 "dtc-lexer.l" { DPRINT("Keyword: /bits/\n"); BEGIN_DEFAULT(); return DT_BITS; } YY_BREAK -case 7: +case 8: YY_RULE_SETUP -#line 127 "dtc-lexer.l" +#line 133 "dtc-lexer.l" { DPRINT("Keyword: /delete-property/\n"); DPRINT("\n"); @@ -1030,9 +1042,9 @@ YY_RULE_SETUP return DT_DEL_PROP; } YY_BREAK -case 8: +case 9: YY_RULE_SETUP -#line 134 "dtc-lexer.l" +#line 140 "dtc-lexer.l" { DPRINT("Keyword: /delete-node/\n"); DPRINT("\n"); @@ -1040,9 +1052,9 @@ YY_RULE_SETUP return DT_DEL_NODE; } YY_BREAK -case 9: +case 10: YY_RULE_SETUP -#line 141 "dtc-lexer.l" +#line 147 "dtc-lexer.l" { DPRINT("Label: %s\n", yytext); yylval.labelref = xstrdup(yytext); @@ -1050,38 +1062,65 @@ YY_RULE_SETUP return DT_LABEL; } YY_BREAK -case 10: +case 11: YY_RULE_SETUP -#line 148 "dtc-lexer.l" +#line 154 "dtc-lexer.l" { - yylval.literal = xstrdup(yytext); - DPRINT("Literal: '%s'\n", yylval.literal); + char *e; + DPRINT("Integer Literal: '%s'\n", yytext); + + errno = 0; + yylval.integer = strtoull(yytext, &e, 0); + + assert(!(*e) || !e[strspn(e, "UL")]); + + if (errno == ERANGE) + lexical_error("Integer literal '%s' out of range", + yytext); + else + /* ERANGE is the only strtoull error triggerable + * by strings matching the pattern */ + assert(errno == 0); return DT_LITERAL; } YY_BREAK -case 11: -/* rule 11 can match eol */ +case 12: +/* rule 12 can match eol */ YY_RULE_SETUP -#line 154 "dtc-lexer.l" +#line 173 "dtc-lexer.l" { - yytext[yyleng-1] = '\0'; - yylval.literal = xstrdup(yytext+1); - DPRINT("Character literal: %s\n", yylval.literal); + struct data d; + DPRINT("Character literal: %s\n", yytext); + + d = data_copy_escape_string(yytext+1, yyleng-2); + if (d.len == 1) { + lexical_error("Empty character literal"); + yylval.integer = 0; + return DT_CHAR_LITERAL; + } + + yylval.integer = (unsigned char)d.val[0]; + + if (d.len > 2) + lexical_error("Character literal has %d" + " characters instead of 1", + d.len - 1); + return DT_CHAR_LITERAL; } YY_BREAK -case 12: +case 13: YY_RULE_SETUP -#line 161 "dtc-lexer.l" +#line 194 "dtc-lexer.l" { /* label reference */ DPRINT("Ref: %s\n", yytext+1); yylval.labelref = xstrdup(yytext+1); return DT_REF; } YY_BREAK -case 13: +case 14: YY_RULE_SETUP -#line 167 "dtc-lexer.l" +#line 200 "dtc-lexer.l" { /* new-style path reference */ yytext[yyleng-1] = '\0'; DPRINT("Ref: %s\n", yytext+2); @@ -1089,27 +1128,27 @@ YY_RULE_SETUP return DT_REF; } YY_BREAK -case 14: +case 15: YY_RULE_SETUP -#line 174 "dtc-lexer.l" +#line 207 "dtc-lexer.l" { yylval.byte = strtol(yytext, NULL, 16); DPRINT("Byte: %02x\n", (int)yylval.byte); return DT_BYTE; } YY_BREAK -case 15: +case 16: YY_RULE_SETUP -#line 180 "dtc-lexer.l" +#line 213 "dtc-lexer.l" { DPRINT("/BYTESTRING\n"); BEGIN_DEFAULT(); return ']'; } YY_BREAK -case 16: +case 17: YY_RULE_SETUP -#line 186 "dtc-lexer.l" +#line 219 "dtc-lexer.l" { DPRINT("PropNodeName: %s\n", yytext); yylval.propnodename = xstrdup((yytext[0] == '\\') ? @@ -1118,75 +1157,75 @@ YY_RULE_SETUP return DT_PROPNODENAME; } YY_BREAK -case 17: +case 18: YY_RULE_SETUP -#line 194 "dtc-lexer.l" +#line 227 "dtc-lexer.l" { DPRINT("Binary Include\n"); return DT_INCBIN; } YY_BREAK -case 18: -/* rule 18 can match eol */ -YY_RULE_SETUP -#line 199 "dtc-lexer.l" -/* eat whitespace */ - YY_BREAK case 19: /* rule 19 can match eol */ YY_RULE_SETUP -#line 200 "dtc-lexer.l" -/* eat C-style comments */ +#line 232 "dtc-lexer.l" +/* eat whitespace */ YY_BREAK case 20: /* rule 20 can match eol */ YY_RULE_SETUP -#line 201 "dtc-lexer.l" -/* eat C++-style comments */ +#line 233 "dtc-lexer.l" +/* eat C-style comments */ YY_BREAK case 21: +/* rule 21 can match eol */ YY_RULE_SETUP -#line 203 "dtc-lexer.l" -{ return DT_LSHIFT; }; +#line 234 "dtc-lexer.l" +/* eat C++-style comments */ YY_BREAK case 22: YY_RULE_SETUP -#line 204 "dtc-lexer.l" -{ return DT_RSHIFT; }; +#line 236 "dtc-lexer.l" +{ return DT_LSHIFT; }; YY_BREAK case 23: YY_RULE_SETUP -#line 205 "dtc-lexer.l" -{ return DT_LE; }; +#line 237 "dtc-lexer.l" +{ return DT_RSHIFT; }; YY_BREAK case 24: YY_RULE_SETUP -#line 206 "dtc-lexer.l" -{ return DT_GE; }; +#line 238 "dtc-lexer.l" +{ return DT_LE; }; YY_BREAK case 25: YY_RULE_SETUP -#line 207 "dtc-lexer.l" -{ return DT_EQ; }; +#line 239 "dtc-lexer.l" +{ return DT_GE; }; YY_BREAK case 26: YY_RULE_SETUP -#line 208 "dtc-lexer.l" -{ return DT_NE; }; +#line 240 "dtc-lexer.l" +{ return DT_EQ; }; YY_BREAK case 27: YY_RULE_SETUP -#line 209 "dtc-lexer.l" -{ return DT_AND; }; +#line 241 "dtc-lexer.l" +{ return DT_NE; }; YY_BREAK case 28: YY_RULE_SETUP -#line 210 "dtc-lexer.l" -{ return DT_OR; }; +#line 242 "dtc-lexer.l" +{ return DT_AND; }; YY_BREAK case 29: YY_RULE_SETUP -#line 212 "dtc-lexer.l" +#line 243 "dtc-lexer.l" +{ return DT_OR; }; + YY_BREAK +case 30: +YY_RULE_SETUP +#line 245 "dtc-lexer.l" { DPRINT("Char: %c (\\x%02x)\n", yytext[0], (unsigned)yytext[0]); @@ -1202,12 +1241,12 @@ YY_RULE_SETUP return yytext[0]; } YY_BREAK -case 30: +case 31: YY_RULE_SETUP -#line 227 "dtc-lexer.l" +#line 260 "dtc-lexer.l" ECHO; YY_BREAK -#line 1211 "dtc-lexer.lex.c" +#line 1250 "dtc-lexer.lex.c" case YY_END_OF_BUFFER: { @@ -1337,6 +1376,7 @@ ECHO; "fatal flex scanner internal error--no action found" ); } /* end of action switch */ } /* end of scanning one token */ + } /* end of user's declarations */ } /* end of yylex */ /* yy_get_next_buffer - try to read in a new buffer @@ -1392,21 +1432,21 @@ static int yy_get_next_buffer (void) else { - int num_to_read = + yy_size_t num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; while ( num_to_read <= 0 ) { /* Not enough room in the buffer - grow it. */ /* just a shorter name for the current buffer */ - YY_BUFFER_STATE b = YY_CURRENT_BUFFER; + YY_BUFFER_STATE b = YY_CURRENT_BUFFER_LVALUE; int yy_c_buf_p_offset = (int) ((yy_c_buf_p) - b->yy_ch_buf); if ( b->yy_is_our_buffer ) { - int new_size = b->yy_buf_size * 2; + yy_size_t new_size = b->yy_buf_size * 2; if ( new_size <= 0 ) b->yy_buf_size += b->yy_buf_size / 8; @@ -1437,7 +1477,7 @@ static int yy_get_next_buffer (void) /* Read in more data. */ YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), - (yy_n_chars), (size_t) num_to_read ); + (yy_n_chars), num_to_read ); YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); } @@ -1499,7 +1539,7 @@ static int yy_get_next_buffer (void) while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) { yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 161 ) + if ( yy_current_state >= 166 ) yy_c = yy_meta[(unsigned int) yy_c]; } yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; @@ -1527,13 +1567,13 @@ static int yy_get_next_buffer (void) while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) { yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 161 ) + if ( yy_current_state >= 166 ) yy_c = yy_meta[(unsigned int) yy_c]; } yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - yy_is_jam = (yy_current_state == 160); + yy_is_jam = (yy_current_state == 165); - return yy_is_jam ? 0 : yy_current_state; + return yy_is_jam ? 0 : yy_current_state; } #ifndef YY_NO_INPUT @@ -1560,7 +1600,7 @@ static int yy_get_next_buffer (void) else { /* need more input */ - int offset = (yy_c_buf_p) - (yytext_ptr); + yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); ++(yy_c_buf_p); switch ( yy_get_next_buffer( ) ) @@ -1834,7 +1874,7 @@ void yypop_buffer_state (void) */ static void yyensure_buffer_stack (void) { - int num_to_alloc; + yy_size_t num_to_alloc; if (!(yy_buffer_stack)) { @@ -1931,12 +1971,12 @@ YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) * * @return the newly allocated buffer state object. */ -YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) +YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) { YY_BUFFER_STATE b; char *buf; yy_size_t n; - int i; + yy_size_t i; /* Get memory for full buffer, including space for trailing EOB's. */ n = _yybytes_len + 2; @@ -2018,7 +2058,7 @@ FILE *yyget_out (void) /** Get the length of the current token. * */ -int yyget_leng (void) +yy_size_t yyget_leng (void) { return yyleng; } @@ -2166,7 +2206,7 @@ void yyfree (void * ptr ) #define YYTABLES_NAME "yytables" -#line 227 "dtc-lexer.l" +#line 259 "dtc-lexer.l" @@ -2182,14 +2222,25 @@ static void push_input_file(const char *filename) } -static int pop_input_file(void) +static bool pop_input_file(void) { if (srcfile_pop() == 0) - return 0; + return false; yypop_buffer_state(); yyin = current_srcfile->f; - return 1; + return true; +} + +static void lexical_error(const char *fmt, ...) +{ + va_list ap; + + va_start(ap, fmt); + srcpos_verror(&yylloc, "Lexical error", fmt, ap); + va_end(ap); + + treesource_error = true; } diff --git a/scripts/dtc/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped index c8769d550cfbf..844c4628962d0 100644 --- a/scripts/dtc/dtc-parser.tab.c_shipped +++ b/scripts/dtc/dtc-parser.tab.c_shipped @@ -1,19 +1,19 @@ -/* A Bison parser, made by GNU Bison 2.7.12-4996. */ +/* A Bison parser, made by GNU Bison 3.0.2. */ /* Bison implementation for Yacc-like parsers in C - - Copyright (C) 1984, 1989-1990, 2000-2013 Free Software Foundation, Inc. - + + Copyright (C) 1984, 1989-1990, 2000-2013 Free Software Foundation, Inc. + This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. - + This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with this program. If not, see . */ @@ -26,7 +26,7 @@ special exception, which will cause the skeleton and the resulting Bison output files to be licensed under the GNU General Public License without this special exception. - + This special exception was added by the Free Software Foundation in version 2.2 of Bison. */ @@ -44,7 +44,7 @@ #define YYBISON 1 /* Bison version. */ -#define YYBISON_VERSION "2.7.12-4996" +#define YYBISON_VERSION "3.0.2" /* Skeleton name. */ #define YYSKELETON_NAME "yacc.c" @@ -62,34 +62,32 @@ /* Copy the first part of user declarations. */ -/* Line 371 of yacc.c */ -#line 21 "dtc-parser.y" +#line 20 "dtc-parser.y" /* yacc.c:339 */ #include +#include #include "dtc.h" #include "srcpos.h" -YYLTYPE yylloc; - extern int yylex(void); -extern void print_error(char const *fmt, ...); extern void yyerror(char const *s); +#define ERROR(loc, ...) \ + do { \ + srcpos_error((loc), "Error", __VA_ARGS__); \ + treesource_error = true; \ + } while (0) extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); -static unsigned char eval_char_literal(const char *s); +extern bool treesource_error; -/* Line 371 of yacc.c */ -#line 87 "dtc-parser.tab.c" +#line 85 "dtc-parser.tab.c" /* yacc.c:339 */ -# ifndef YY_NULL +# ifndef YY_NULLPTR # if defined __cplusplus && 201103L <= __cplusplus -# define YY_NULL nullptr +# define YY_NULLPTR nullptr # else -# define YY_NULL 0 +# define YY_NULLPTR 0 # endif # endif @@ -105,7 +103,7 @@ static unsigned char eval_char_literal(const char *s); by #include "dtc-parser.tab.h". */ #ifndef YY_YY_DTC_PARSER_TAB_H_INCLUDED # define YY_YY_DTC_PARSER_TAB_H_INCLUDED -/* Enabling traces. */ +/* Debug traces. */ #ifndef YYDEBUG # define YYDEBUG 0 #endif @@ -113,48 +111,45 @@ static unsigned char eval_char_literal(const char *s); extern int yydebug; #endif -/* Tokens. */ +/* Token type. */ #ifndef YYTOKENTYPE # define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_LSHIFT = 260, - DT_RSHIFT = 261, - DT_LE = 262, - DT_GE = 263, - DT_EQ = 264, - DT_NE = 265, - DT_AND = 266, - DT_OR = 267, - DT_BITS = 268, - DT_DEL_PROP = 269, - DT_DEL_NODE = 270, - DT_PROPNODENAME = 271, - DT_LITERAL = 272, - DT_CHAR_LITERAL = 273, - DT_BASE = 274, - DT_BYTE = 275, - DT_STRING = 276, - DT_LABEL = 277, - DT_REF = 278, - DT_INCBIN = 279 - }; + enum yytokentype + { + DT_V1 = 258, + DT_PLUGIN = 259, + DT_MEMRESERVE = 260, + DT_LSHIFT = 261, + DT_RSHIFT = 262, + DT_LE = 263, + DT_GE = 264, + DT_EQ = 265, + DT_NE = 266, + DT_AND = 267, + DT_OR = 268, + DT_BITS = 269, + DT_DEL_PROP = 270, + DT_DEL_NODE = 271, + DT_PROPNODENAME = 272, + DT_LITERAL = 273, + DT_CHAR_LITERAL = 274, + DT_BYTE = 275, + DT_STRING = 276, + DT_LABEL = 277, + DT_REF = 278, + DT_INCBIN = 279 + }; #endif - +/* Value type. */ #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE +typedef union YYSTYPE YYSTYPE; +union YYSTYPE { -/* Line 387 of yacc.c */ -#line 40 "dtc-parser.y" +#line 39 "dtc-parser.y" /* yacc.c:355 */ char *propnodename; - char *literal; char *labelref; - unsigned int cbase; uint8_t byte; struct data data; @@ -169,38 +164,38 @@ typedef union YYSTYPE struct node *nodelist; struct reserve_info *re; uint64_t integer; + bool is_plugin; - -/* Line 387 of yacc.c */ -#line 176 "dtc-parser.tab.c" -} YYSTYPE; +#line 170 "dtc-parser.tab.c" /* yacc.c:355 */ +}; # define YYSTYPE_IS_TRIVIAL 1 -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ # define YYSTYPE_IS_DECLARED 1 #endif -extern YYSTYPE yylval; - -#ifdef YYPARSE_PARAM -#if defined __STDC__ || defined __cplusplus -int yyparse (void *YYPARSE_PARAM); -#else -int yyparse (); +/* Location type. */ +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE YYLTYPE; +struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +}; +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 #endif -#else /* ! YYPARSE_PARAM */ -#if defined __STDC__ || defined __cplusplus + + +extern YYSTYPE yylval; +extern YYLTYPE yylloc; int yyparse (void); -#else -int yyparse (); -#endif -#endif /* ! YYPARSE_PARAM */ #endif /* !YY_YY_DTC_PARSER_TAB_H_INCLUDED */ /* Copy the second part of user declarations. */ -/* Line 390 of yacc.c */ -#line 204 "dtc-parser.tab.c" +#line 199 "dtc-parser.tab.c" /* yacc.c:358 */ #ifdef short # undef short @@ -214,11 +209,8 @@ typedef unsigned char yytype_uint8; #ifdef YYTYPE_INT8 typedef YYTYPE_INT8 yytype_int8; -#elif (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -typedef signed char yytype_int8; #else -typedef short int yytype_int8; +typedef signed char yytype_int8; #endif #ifdef YYTYPE_UINT16 @@ -238,8 +230,7 @@ typedef short int yytype_int16; # define YYSIZE_T __SIZE_TYPE__ # elif defined size_t # define YYSIZE_T size_t -# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) +# elif ! defined YYSIZE_T # include /* INFRINGES ON USER NAME SPACE */ # define YYSIZE_T size_t # else @@ -261,11 +252,30 @@ typedef short int yytype_int16; # endif #endif -#ifndef __attribute__ -/* This feature is available in gcc versions 2.5 and later. */ -# if (! defined __GNUC__ || __GNUC__ < 2 \ - || (__GNUC__ == 2 && __GNUC_MINOR__ < 5)) -# define __attribute__(Spec) /* empty */ +#ifndef YY_ATTRIBUTE +# if (defined __GNUC__ \ + && (2 < __GNUC__ || (__GNUC__ == 2 && 96 <= __GNUC_MINOR__))) \ + || defined __SUNPRO_C && 0x5110 <= __SUNPRO_C +# define YY_ATTRIBUTE(Spec) __attribute__(Spec) +# else +# define YY_ATTRIBUTE(Spec) /* empty */ +# endif +#endif + +#ifndef YY_ATTRIBUTE_PURE +# define YY_ATTRIBUTE_PURE YY_ATTRIBUTE ((__pure__)) +#endif + +#ifndef YY_ATTRIBUTE_UNUSED +# define YY_ATTRIBUTE_UNUSED YY_ATTRIBUTE ((__unused__)) +#endif + +#if !defined _Noreturn \ + && (!defined __STDC_VERSION__ || __STDC_VERSION__ < 201112) +# if defined _MSC_VER && 1200 <= _MSC_VER +# define _Noreturn __declspec (noreturn) +# else +# define _Noreturn YY_ATTRIBUTE ((__noreturn__)) # endif #endif @@ -276,25 +286,26 @@ typedef short int yytype_int16; # define YYUSE(E) /* empty */ #endif - -/* Identity function, used to suppress warnings about constant conditions. */ -#ifndef lint -# define YYID(N) (N) +#if defined __GNUC__ && 407 <= __GNUC__ * 100 + __GNUC_MINOR__ +/* Suppress an incorrect diagnostic about yylval being uninitialized. */ +# define YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN \ + _Pragma ("GCC diagnostic push") \ + _Pragma ("GCC diagnostic ignored \"-Wuninitialized\"")\ + _Pragma ("GCC diagnostic ignored \"-Wmaybe-uninitialized\"") +# define YY_IGNORE_MAYBE_UNINITIALIZED_END \ + _Pragma ("GCC diagnostic pop") #else -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static int -YYID (int yyi) -#else -static int -YYID (yyi) - int yyi; +# define YY_INITIAL_VALUE(Value) Value #endif -{ - return yyi; -} +#ifndef YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN +# define YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN +# define YY_IGNORE_MAYBE_UNINITIALIZED_END +#endif +#ifndef YY_INITIAL_VALUE +# define YY_INITIAL_VALUE(Value) /* Nothing. */ #endif + #if ! defined yyoverflow || YYERROR_VERBOSE /* The parser invokes alloca or malloc; define the necessary symbols. */ @@ -312,8 +323,7 @@ YYID (yyi) # define alloca _alloca # else # define YYSTACK_ALLOC alloca -# if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) +# if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS # include /* INFRINGES ON USER NAME SPACE */ /* Use EXIT_SUCCESS as a witness for stdlib.h. */ # ifndef EXIT_SUCCESS @@ -325,8 +335,8 @@ YYID (yyi) # endif # ifdef YYSTACK_ALLOC - /* Pacify GCC's `empty if-body' warning. */ -# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) + /* Pacify GCC's 'empty if-body' warning. */ +# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0) # ifndef YYSTACK_ALLOC_MAXIMUM /* The OS might guarantee only one guard page at the bottom of the stack, and a page size can be as small as 4096 bytes. So we cannot safely @@ -342,7 +352,7 @@ YYID (yyi) # endif # if (defined __cplusplus && ! defined EXIT_SUCCESS \ && ! ((defined YYMALLOC || defined malloc) \ - && (defined YYFREE || defined free))) + && (defined YYFREE || defined free))) # include /* INFRINGES ON USER NAME SPACE */ # ifndef EXIT_SUCCESS # define EXIT_SUCCESS 0 @@ -350,15 +360,13 @@ YYID (yyi) # endif # ifndef YYMALLOC # define YYMALLOC malloc -# if ! defined malloc && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) +# if ! defined malloc && ! defined EXIT_SUCCESS void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ # endif # endif # ifndef YYFREE # define YYFREE free -# if ! defined free && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) +# if ! defined free && ! defined EXIT_SUCCESS void free (void *); /* INFRINGES ON USER NAME SPACE */ # endif # endif @@ -368,13 +376,15 @@ void free (void *); /* INFRINGES ON USER NAME SPACE */ #if (! defined yyoverflow \ && (! defined __cplusplus \ - || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) + || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \ + && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) /* A type that is properly aligned for any stack member. */ union yyalloc { yytype_int16 yyss_alloc; YYSTYPE yyvs_alloc; + YYLTYPE yyls_alloc; }; /* The size of the maximum gap between one aligned stack and the next. */ @@ -383,8 +393,8 @@ union yyalloc /* The size of an array large to enough to hold all stacks, each with N elements. */ # define YYSTACK_BYTES(N) \ - ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ - + YYSTACK_GAP_MAXIMUM) + ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \ + + 2 * YYSTACK_GAP_MAXIMUM) # define YYCOPY_NEEDED 1 @@ -393,16 +403,16 @@ union yyalloc elements in the stack, and YYPTR gives the new location of the stack. Advance YYPTR to a properly aligned location for the next stack. */ -# define YYSTACK_RELOCATE(Stack_alloc, Stack) \ - do \ - { \ - YYSIZE_T yynewbytes; \ - YYCOPY (&yyptr->Stack_alloc, Stack, yysize); \ - Stack = &yyptr->Stack_alloc; \ - yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ - yyptr += yynewbytes / sizeof (*yyptr); \ - } \ - while (YYID (0)) +# define YYSTACK_RELOCATE(Stack_alloc, Stack) \ + do \ + { \ + YYSIZE_T yynewbytes; \ + YYCOPY (&yyptr->Stack_alloc, Stack, yysize); \ + Stack = &yyptr->Stack_alloc; \ + yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ + yyptr += yynewbytes / sizeof (*yyptr); \ + } \ + while (0) #endif @@ -421,7 +431,7 @@ union yyalloc for (yyi = 0; yyi < (Count); yyi++) \ (Dst)[yyi] = (Src)[yyi]; \ } \ - while (YYID (0)) + while (0) # endif # endif #endif /* !YYCOPY_NEEDED */ @@ -429,25 +439,27 @@ union yyalloc /* YYFINAL -- State number of the termination state. */ #define YYFINAL 4 /* YYLAST -- Last index in YYTABLE. */ -#define YYLAST 133 +#define YYLAST 136 /* YYNTOKENS -- Number of terminals. */ #define YYNTOKENS 48 /* YYNNTS -- Number of nonterminals. */ -#define YYNNTS 28 +#define YYNNTS 29 /* YYNRULES -- Number of rules. */ -#define YYNRULES 79 -/* YYNRULES -- Number of states. */ -#define YYNSTATES 141 +#define YYNRULES 82 +/* YYNSTATES -- Number of states. */ +#define YYNSTATES 147 -/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ +/* YYTRANSLATE[YYX] -- Symbol number corresponding to YYX as returned + by yylex, with out-of-bounds checking. */ #define YYUNDEFTOK 2 #define YYMAXUTOK 279 -#define YYTRANSLATE(YYX) \ +#define YYTRANSLATE(YYX) \ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) -/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ +/* YYTRANSLATE[TOKEN-NUM] -- Symbol number corresponding to TOKEN-NUM + as returned by yylex, without out-of-bounds checking. */ static const yytype_uint8 yytranslate[] = { 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, @@ -481,63 +493,18 @@ static const yytype_uint8 yytranslate[] = }; #if YYDEBUG -/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in - YYRHS. */ -static const yytype_uint16 yyprhs[] = -{ - 0, 0, 3, 8, 9, 12, 17, 20, 23, 27, - 31, 36, 42, 43, 46, 51, 54, 58, 61, 64, - 68, 73, 76, 86, 92, 95, 96, 99, 102, 106, - 108, 111, 114, 117, 119, 121, 125, 127, 129, 135, - 137, 141, 143, 147, 149, 153, 155, 159, 161, 165, - 167, 171, 175, 177, 181, 185, 189, 193, 197, 201, - 203, 207, 211, 213, 217, 221, 225, 227, 229, 232, - 235, 238, 239, 242, 245, 246, 249, 252, 255, 259 -}; - -/* YYRHS -- A `-1'-separated list of the rules' RHS. */ -static const yytype_int8 yyrhs[] = -{ - 49, 0, -1, 3, 25, 50, 52, -1, -1, 51, - 50, -1, 4, 59, 59, 25, -1, 22, 51, -1, - 26, 53, -1, 52, 26, 53, -1, 52, 23, 53, - -1, 52, 15, 23, 25, -1, 27, 54, 74, 28, - 25, -1, -1, 54, 55, -1, 16, 29, 56, 25, - -1, 16, 25, -1, 14, 16, 25, -1, 22, 55, - -1, 57, 21, -1, 57, 58, 30, -1, 57, 31, - 73, 32, -1, 57, 23, -1, 57, 24, 33, 21, - 34, 59, 34, 59, 35, -1, 57, 24, 33, 21, - 35, -1, 56, 22, -1, -1, 56, 34, -1, 57, - 22, -1, 13, 17, 36, -1, 36, -1, 58, 59, - -1, 58, 23, -1, 58, 22, -1, 17, -1, 18, - -1, 33, 60, 35, -1, 61, -1, 62, -1, 62, - 37, 60, 38, 61, -1, 63, -1, 62, 12, 63, - -1, 64, -1, 63, 11, 64, -1, 65, -1, 64, - 39, 65, -1, 66, -1, 65, 40, 66, -1, 67, - -1, 66, 41, 67, -1, 68, -1, 67, 9, 68, - -1, 67, 10, 68, -1, 69, -1, 68, 36, 69, - -1, 68, 30, 69, -1, 68, 7, 69, -1, 68, - 8, 69, -1, 69, 5, 70, -1, 69, 6, 70, - -1, 70, -1, 70, 42, 71, -1, 70, 43, 71, - -1, 71, -1, 71, 44, 72, -1, 71, 26, 72, - -1, 71, 45, 72, -1, 72, -1, 59, -1, 43, - 72, -1, 46, 72, -1, 47, 72, -1, -1, 73, - 20, -1, 73, 22, -1, -1, 75, 74, -1, 75, - 55, -1, 16, 53, -1, 15, 16, 25, -1, 22, - 75, -1 -}; - -/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ + /* YYRLINE[YYN] -- Source line where rule number YYN was defined. */ static const yytype_uint16 yyrline[] = { - 0, 109, 109, 118, 121, 128, 132, 140, 144, 148, - 158, 172, 180, 183, 190, 194, 198, 202, 210, 214, - 218, 222, 226, 243, 253, 261, 264, 268, 275, 290, - 295, 315, 329, 336, 340, 344, 351, 355, 356, 360, - 361, 365, 366, 370, 371, 375, 376, 380, 381, 385, - 386, 387, 391, 392, 393, 394, 395, 399, 400, 401, - 405, 406, 407, 411, 412, 413, 414, 418, 419, 420, - 421, 426, 429, 433, 441, 444, 448, 456, 460, 464 + 0, 108, 108, 118, 121, 129, 132, 139, 143, 151, + 155, 160, 171, 181, 196, 204, 207, 214, 218, 222, + 226, 234, 238, 242, 246, 250, 266, 276, 284, 287, + 291, 298, 314, 319, 338, 352, 359, 360, 361, 368, + 372, 373, 377, 378, 382, 383, 387, 388, 392, 393, + 397, 398, 402, 403, 404, 408, 409, 410, 411, 412, + 416, 417, 418, 422, 423, 424, 428, 429, 430, 431, + 435, 436, 437, 438, 443, 446, 450, 458, 461, 465, + 473, 477, 481 }; #endif @@ -546,25 +513,25 @@ static const yytype_uint16 yyrline[] = First, the terminals, then, starting at YYNTOKENS, nonterminals. */ static const char *const yytname[] = { - "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE", "DT_LSHIFT", - "DT_RSHIFT", "DT_LE", "DT_GE", "DT_EQ", "DT_NE", "DT_AND", "DT_OR", - "DT_BITS", "DT_DEL_PROP", "DT_DEL_NODE", "DT_PROPNODENAME", "DT_LITERAL", - "DT_CHAR_LITERAL", "DT_BASE", "DT_BYTE", "DT_STRING", "DT_LABEL", + "$end", "error", "$undefined", "DT_V1", "DT_PLUGIN", "DT_MEMRESERVE", + "DT_LSHIFT", "DT_RSHIFT", "DT_LE", "DT_GE", "DT_EQ", "DT_NE", "DT_AND", + "DT_OR", "DT_BITS", "DT_DEL_PROP", "DT_DEL_NODE", "DT_PROPNODENAME", + "DT_LITERAL", "DT_CHAR_LITERAL", "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'/'", "'{'", "'}'", "'='", "'>'", "'['", "']'", "'('", "','", "')'", "'<'", "'?'", "':'", "'|'", "'^'", "'&'", "'+'", "'-'", "'*'", "'%'", "'~'", "'!'", "$accept", "sourcefile", - "memreserves", "memreserve", "devicetree", "nodedef", "proplist", - "propdef", "propdata", "propdataprefix", "arrayprefix", "integer_prim", - "integer_expr", "integer_trinary", "integer_or", "integer_and", - "integer_bitor", "integer_bitxor", "integer_bitand", "integer_eq", - "integer_rela", "integer_shift", "integer_add", "integer_mul", - "integer_unary", "bytestring", "subnodes", "subnode", YY_NULL + "plugindecl", "memreserves", "memreserve", "devicetree", "nodedef", + "proplist", "propdef", "propdata", "propdataprefix", "arrayprefix", + "integer_prim", "integer_expr", "integer_trinary", "integer_or", + "integer_and", "integer_bitor", "integer_bitxor", "integer_bitand", + "integer_eq", "integer_rela", "integer_shift", "integer_add", + "integer_mul", "integer_unary", "bytestring", "subnodes", "subnode", YY_NULLPTR }; #endif # ifdef YYPRINT -/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to - token YYLEX-NUM. */ +/* YYTOKNUM[NUM] -- (External) token number corresponding to the + (internal) symbol number NUM (which must be that of a token). */ static const yytype_uint16 yytoknum[] = { 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, @@ -575,183 +542,173 @@ static const yytype_uint16 yytoknum[] = }; # endif -/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ -static const yytype_uint8 yyr1[] = -{ - 0, 48, 49, 50, 50, 51, 51, 52, 52, 52, - 52, 53, 54, 54, 55, 55, 55, 55, 56, 56, - 56, 56, 56, 56, 56, 57, 57, 57, 58, 58, - 58, 58, 58, 59, 59, 59, 60, 61, 61, 62, - 62, 63, 63, 64, 64, 65, 65, 66, 66, 67, - 67, 67, 68, 68, 68, 68, 68, 69, 69, 69, - 70, 70, 70, 71, 71, 71, 71, 72, 72, 72, - 72, 73, 73, 73, 74, 74, 74, 75, 75, 75 -}; +#define YYPACT_NINF -84 -/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ -static const yytype_uint8 yyr2[] = +#define yypact_value_is_default(Yystate) \ + (!!((Yystate) == (-84))) + +#define YYTABLE_NINF -1 + +#define yytable_value_is_error(Yytable_value) \ + 0 + + /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing + STATE-NUM. */ +static const yytype_int8 yypact[] = { - 0, 2, 4, 0, 2, 4, 2, 2, 3, 3, - 4, 5, 0, 2, 4, 2, 3, 2, 2, 3, - 4, 2, 9, 5, 2, 0, 2, 2, 3, 1, - 2, 2, 2, 1, 1, 3, 1, 1, 5, 1, - 3, 1, 3, 1, 3, 1, 3, 1, 3, 1, - 3, 3, 1, 3, 3, 3, 3, 3, 3, 1, - 3, 3, 1, 3, 3, 3, 1, 1, 2, 2, - 2, 0, 2, 2, 0, 2, 2, 2, 3, 2 + 15, -12, 35, 42, -84, 27, 9, -84, 24, 9, + 43, 9, -84, -84, -10, 24, -84, 60, 44, -84, + -10, -10, -10, -84, 55, -84, -7, 52, 53, 51, + 54, 10, 2, 38, 37, -4, -84, 68, -84, -84, + 71, 73, 60, 60, -84, -84, -84, -84, -10, -10, + -10, -10, -10, -10, -10, -10, -10, -10, -10, -10, + -10, -10, -10, -10, -10, -10, -10, -84, 56, 72, + 60, -84, -84, 52, 61, 53, 51, 54, 10, 2, + 2, 38, 38, 38, 38, 37, 37, -4, -4, -84, + -84, -84, 81, 83, 34, 56, -84, 74, 56, -84, + -84, -10, 76, 78, -84, -84, -84, -84, -84, 79, + -84, -84, -84, -84, -84, -6, 3, -84, -84, -84, + -84, 87, -84, -84, -84, 75, -84, -84, 32, 70, + 86, 36, -84, -84, -84, -84, -84, 47, -84, -84, + -84, 24, -84, 77, 24, 80, -84 }; -/* YYDEFACT[STATE-NAME] -- Default reduction number in state STATE-NUM. - Performed when YYTABLE doesn't specify something else to do. Zero - means the default is an error. */ + /* YYDEFACT[STATE-NUM] -- Default reduction number in state STATE-NUM. + Performed when YYTABLE does not specify something else to do. Zero + means the default is an error. */ static const yytype_uint8 yydefact[] = { - 0, 0, 0, 3, 1, 0, 0, 0, 3, 33, - 34, 0, 0, 6, 0, 2, 4, 0, 0, 0, - 67, 0, 36, 37, 39, 41, 43, 45, 47, 49, - 52, 59, 62, 66, 0, 12, 7, 0, 0, 0, - 68, 69, 70, 35, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 3, 1, 0, 5, 4, 0, 0, + 0, 5, 36, 37, 0, 0, 8, 0, 2, 6, + 0, 0, 0, 70, 0, 39, 40, 42, 44, 46, + 48, 50, 52, 55, 62, 65, 69, 0, 15, 9, + 0, 0, 0, 0, 71, 72, 73, 38, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 5, 74, 0, 9, 8, 40, 0, - 42, 44, 46, 48, 50, 51, 55, 56, 54, 53, - 57, 58, 60, 61, 64, 63, 65, 0, 0, 0, - 0, 13, 0, 74, 10, 0, 0, 0, 15, 25, - 77, 17, 79, 0, 76, 75, 38, 16, 78, 0, - 0, 11, 24, 14, 26, 0, 18, 27, 21, 0, - 71, 29, 0, 0, 0, 0, 32, 31, 19, 30, - 28, 0, 72, 73, 20, 0, 23, 0, 0, 0, - 22 + 0, 0, 0, 0, 0, 0, 0, 7, 77, 0, + 0, 12, 10, 43, 0, 45, 47, 49, 51, 53, + 54, 58, 59, 57, 56, 60, 61, 63, 64, 67, + 66, 68, 0, 0, 0, 0, 16, 0, 77, 13, + 11, 0, 0, 0, 18, 28, 80, 20, 82, 0, + 79, 78, 41, 19, 81, 0, 0, 14, 27, 17, + 29, 0, 21, 30, 24, 0, 74, 32, 0, 0, + 0, 0, 35, 34, 22, 33, 31, 0, 75, 76, + 23, 0, 26, 0, 0, 0, 25 }; -/* YYDEFGOTO[NTERM-NUM]. */ -static const yytype_int8 yydefgoto[] = + /* YYPGOTO[NTERM-NUM]. */ +static const yytype_int8 yypgoto[] = { - -1, 2, 7, 8, 15, 36, 64, 91, 109, 110, - 122, 20, 21, 22, 23, 24, 25, 26, 27, 28, - 29, 30, 31, 32, 33, 125, 92, 93 + -84, -84, -84, 98, 101, -84, -41, -84, -83, -84, + -84, -84, -8, 63, 12, -84, 66, 67, 65, 69, + 82, 29, 18, 25, 26, -17, -84, 20, 28 }; -/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing - STATE-NUM. */ -#define YYPACT_NINF -78 -static const yytype_int8 yypact[] = + /* YYDEFGOTO[NTERM-NUM]. */ +static const yytype_int16 yydefgoto[] = { - 22, 11, 51, 10, -78, 23, 10, 2, 10, -78, - -78, -9, 23, -78, 30, 38, -78, -9, -9, -9, - -78, 35, -78, -6, 52, 29, 48, 49, 33, 3, - 71, 36, 0, -78, 64, -78, -78, 68, 30, 30, - -78, -78, -78, -78, -9, -9, -9, -9, -9, -9, - -9, -9, -9, -9, -9, -9, -9, -9, -9, -9, - -9, -9, -9, -78, 44, 67, -78, -78, 52, 55, - 29, 48, 49, 33, 3, 3, 71, 71, 71, 71, - 36, 36, 0, 0, -78, -78, -78, 78, 79, 42, - 44, -78, 69, 44, -78, -9, 73, 74, -78, -78, - -78, -78, -78, 75, -78, -78, -78, -78, -78, -7, - -1, -78, -78, -78, -78, 84, -78, -78, -78, 63, - -78, -78, 32, 66, 82, -3, -78, -78, -78, -78, - -78, 46, -78, -78, -78, 23, -78, 70, 23, 72, - -78 + -1, 2, 6, 10, 11, 18, 39, 68, 96, 115, + 116, 128, 23, 24, 25, 26, 27, 28, 29, 30, + 31, 32, 33, 34, 35, 36, 131, 97, 98 }; -/* YYPGOTO[NTERM-NUM]. */ -static const yytype_int8 yypgoto[] = + /* YYTABLE[YYPACT[STATE-NUM]] -- What to do in state STATE-NUM. If + positive, shift that token. If negative, reduce the rule whose + number is the opposite. If YYTABLE_NINF, syntax error. */ +static const yytype_uint8 yytable[] = { - -78, -78, 97, 100, -78, -37, -78, -77, -78, -78, - -78, -5, 65, 13, -78, 76, 77, 62, 80, 83, - 34, 20, 26, 28, -14, -78, 18, 24 + 15, 71, 72, 44, 45, 46, 48, 37, 12, 13, + 56, 57, 107, 3, 8, 110, 118, 121, 1, 119, + 54, 55, 64, 14, 122, 123, 124, 125, 120, 100, + 49, 9, 58, 20, 126, 4, 21, 22, 59, 127, + 65, 66, 12, 13, 60, 61, 5, 89, 90, 91, + 12, 13, 7, 106, 132, 133, 138, 14, 139, 104, + 40, 38, 134, 105, 50, 14, 41, 42, 140, 17, + 43, 92, 93, 94, 81, 82, 83, 84, 95, 62, + 63, 141, 142, 79, 80, 85, 86, 38, 87, 88, + 47, 52, 51, 67, 69, 53, 70, 99, 102, 101, + 103, 113, 109, 114, 117, 129, 136, 137, 130, 19, + 16, 144, 74, 112, 73, 146, 76, 75, 111, 0, + 135, 77, 0, 108, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 143, 0, 78, 145 }; -/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If - positive, shift that token. If negative, reduce the rule which - number is the opposite. If YYTABLE_NINF, syntax error. */ -#define YYTABLE_NINF -1 -static const yytype_uint8 yytable[] = +static const yytype_int16 yycheck[] = { - 12, 66, 67, 40, 41, 42, 44, 34, 9, 10, - 52, 53, 115, 101, 5, 112, 104, 132, 113, 133, - 116, 117, 118, 119, 11, 1, 60, 114, 14, 134, - 120, 45, 6, 54, 17, 121, 3, 18, 19, 55, - 9, 10, 50, 51, 61, 62, 84, 85, 86, 9, - 10, 4, 100, 37, 126, 127, 11, 35, 87, 88, - 89, 38, 128, 46, 39, 11, 90, 98, 47, 35, - 43, 99, 76, 77, 78, 79, 56, 57, 58, 59, - 135, 136, 80, 81, 74, 75, 82, 83, 48, 63, - 49, 65, 94, 95, 96, 97, 124, 103, 107, 108, - 111, 123, 130, 131, 138, 16, 13, 140, 106, 71, - 69, 105, 0, 0, 102, 0, 0, 129, 0, 0, - 68, 0, 0, 70, 0, 0, 0, 0, 72, 0, - 137, 0, 73, 139 + 8, 42, 43, 20, 21, 22, 13, 15, 18, 19, + 8, 9, 95, 25, 5, 98, 22, 14, 3, 25, + 10, 11, 26, 33, 21, 22, 23, 24, 34, 70, + 37, 22, 30, 43, 31, 0, 46, 47, 36, 36, + 44, 45, 18, 19, 6, 7, 4, 64, 65, 66, + 18, 19, 25, 94, 22, 23, 20, 33, 22, 25, + 16, 27, 30, 29, 12, 33, 22, 23, 32, 26, + 26, 15, 16, 17, 56, 57, 58, 59, 22, 42, + 43, 34, 35, 54, 55, 60, 61, 27, 62, 63, + 35, 40, 39, 25, 23, 41, 23, 25, 17, 38, + 17, 25, 28, 25, 25, 18, 36, 21, 33, 11, + 9, 34, 49, 101, 48, 35, 51, 50, 98, -1, + 128, 52, -1, 95, -1, -1, -1, -1, -1, -1, + -1, -1, -1, 141, -1, 53, 144 }; -#define yypact_value_is_default(Yystate) \ - (!!((Yystate) == (-78))) - -#define yytable_value_is_error(Yytable_value) \ - YYID (0) + /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing + symbol of state STATE-NUM. */ +static const yytype_uint8 yystos[] = +{ + 0, 3, 49, 25, 0, 4, 50, 25, 5, 22, + 51, 52, 18, 19, 33, 60, 52, 26, 53, 51, + 43, 46, 47, 60, 61, 62, 63, 64, 65, 66, + 67, 68, 69, 70, 71, 72, 73, 60, 27, 54, + 16, 22, 23, 26, 73, 73, 73, 35, 13, 37, + 12, 39, 40, 41, 10, 11, 8, 9, 30, 36, + 6, 7, 42, 43, 26, 44, 45, 25, 55, 23, + 23, 54, 54, 64, 61, 65, 66, 67, 68, 69, + 69, 70, 70, 70, 70, 71, 71, 72, 72, 73, + 73, 73, 15, 16, 17, 22, 56, 75, 76, 25, + 54, 38, 17, 17, 25, 29, 54, 56, 76, 28, + 56, 75, 62, 25, 25, 57, 58, 25, 22, 25, + 34, 14, 21, 22, 23, 24, 31, 36, 59, 18, + 33, 74, 22, 23, 30, 60, 36, 21, 20, 22, + 32, 34, 35, 60, 34, 60, 35 +}; -static const yytype_int16 yycheck[] = + /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ +static const yytype_uint8 yyr1[] = { - 5, 38, 39, 17, 18, 19, 12, 12, 17, 18, - 7, 8, 13, 90, 4, 22, 93, 20, 25, 22, - 21, 22, 23, 24, 33, 3, 26, 34, 26, 32, - 31, 37, 22, 30, 43, 36, 25, 46, 47, 36, - 17, 18, 9, 10, 44, 45, 60, 61, 62, 17, - 18, 0, 89, 15, 22, 23, 33, 27, 14, 15, - 16, 23, 30, 11, 26, 33, 22, 25, 39, 27, - 35, 29, 52, 53, 54, 55, 5, 6, 42, 43, - 34, 35, 56, 57, 50, 51, 58, 59, 40, 25, - 41, 23, 25, 38, 16, 16, 33, 28, 25, 25, - 25, 17, 36, 21, 34, 8, 6, 35, 95, 47, - 45, 93, -1, -1, 90, -1, -1, 122, -1, -1, - 44, -1, -1, 46, -1, -1, -1, -1, 48, -1, - 135, -1, 49, 138 + 0, 48, 49, 50, 50, 51, 51, 52, 52, 53, + 53, 53, 53, 53, 54, 55, 55, 56, 56, 56, + 56, 57, 57, 57, 57, 57, 57, 57, 58, 58, + 58, 59, 59, 59, 59, 59, 60, 60, 60, 61, + 62, 62, 63, 63, 64, 64, 65, 65, 66, 66, + 67, 67, 68, 68, 68, 69, 69, 69, 69, 69, + 70, 70, 70, 71, 71, 71, 72, 72, 72, 72, + 73, 73, 73, 73, 74, 74, 74, 75, 75, 75, + 76, 76, 76 }; -/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing - symbol of state STATE-NUM. */ -static const yytype_uint8 yystos[] = + /* YYR2[YYN] -- Number of symbols on the right hand side of rule YYN. */ +static const yytype_uint8 yyr2[] = { - 0, 3, 49, 25, 0, 4, 22, 50, 51, 17, - 18, 33, 59, 51, 26, 52, 50, 43, 46, 47, - 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, - 69, 70, 71, 72, 59, 27, 53, 15, 23, 26, - 72, 72, 72, 35, 12, 37, 11, 39, 40, 41, - 9, 10, 7, 8, 30, 36, 5, 6, 42, 43, - 26, 44, 45, 25, 54, 23, 53, 53, 63, 60, - 64, 65, 66, 67, 68, 68, 69, 69, 69, 69, - 70, 70, 71, 71, 72, 72, 72, 14, 15, 16, - 22, 55, 74, 75, 25, 38, 16, 16, 25, 29, - 53, 55, 75, 28, 55, 74, 61, 25, 25, 56, - 57, 25, 22, 25, 34, 13, 21, 22, 23, 24, - 31, 36, 58, 17, 33, 73, 22, 23, 30, 59, - 36, 21, 20, 22, 32, 34, 35, 59, 34, 59, - 35 + 0, 2, 5, 0, 2, 0, 2, 4, 2, 2, + 3, 4, 3, 4, 5, 0, 2, 4, 2, 3, + 2, 2, 3, 4, 2, 9, 5, 2, 0, 2, + 2, 3, 1, 2, 2, 2, 1, 1, 3, 1, + 1, 5, 1, 3, 1, 3, 1, 3, 1, 3, + 1, 3, 1, 3, 3, 1, 3, 3, 3, 3, + 3, 3, 1, 3, 3, 1, 3, 3, 3, 1, + 1, 2, 2, 2, 0, 2, 2, 0, 2, 2, + 2, 3, 2 }; -#define yyerrok (yyerrstatus = 0) -#define yyclearin (yychar = YYEMPTY) -#define YYEMPTY (-2) -#define YYEOF 0 - -#define YYACCEPT goto yyacceptlab -#define YYABORT goto yyabortlab -#define YYERROR goto yyerrorlab - - -/* Like YYERROR except do call yyerror. This remains here temporarily - to ease the transition to the new meaning of YYERROR, for GCC. - Once GCC version 2 has supplanted version 1, this can go. However, - YYFAIL appears to be in use. Nevertheless, it is formally deprecated - in Bison 2.4.2's NEWS entry, where a plan to phase it out is - discussed. */ - -#define YYFAIL goto yyerrlab -#if defined YYFAIL - /* This is here to suppress warnings from the GCC cpp's - -Wunused-macros. Normally we don't worry about that warning, but - some users do, and we want to make it easy for users to remove - YYFAIL uses, which will produce warnings from Bison 2.5. */ -#endif + +#define yyerrok (yyerrstatus = 0) +#define yyclearin (yychar = YYEMPTY) +#define YYEMPTY (-2) +#define YYEOF 0 + +#define YYACCEPT goto yyacceptlab +#define YYABORT goto yyabortlab +#define YYERROR goto yyerrorlab + #define YYRECOVERING() (!!yyerrstatus) @@ -768,27 +725,41 @@ do \ else \ { \ yyerror (YY_("syntax error: cannot back up")); \ - YYERROR; \ - } \ -while (YYID (0)) + YYERROR; \ + } \ +while (0) /* Error token number */ -#define YYTERROR 1 -#define YYERRCODE 256 - - -/* This macro is provided for backward compatibility. */ -#ifndef YY_LOCATION_PRINT -# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +#define YYTERROR 1 +#define YYERRCODE 256 + + +/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. + If N is 0, then set CURRENT to the empty location which ends + the previous symbol: RHS[0] (always defined). */ + +#ifndef YYLLOC_DEFAULT +# define YYLLOC_DEFAULT(Current, Rhs, N) \ + do \ + if (N) \ + { \ + (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ + (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ + (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ + (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ + } \ + else \ + { \ + (Current).first_line = (Current).last_line = \ + YYRHSLOC (Rhs, 0).last_line; \ + (Current).first_column = (Current).last_column = \ + YYRHSLOC (Rhs, 0).last_column; \ + } \ + while (0) #endif +#define YYRHSLOC(Rhs, K) ((Rhs)[K]) -/* YYLEX -- calling `yylex' with the right arguments. */ -#ifdef YYLEX_PARAM -# define YYLEX yylex (YYLEX_PARAM) -#else -# define YYLEX yylex () -#endif /* Enable debugging if requested. */ #if YYDEBUG @@ -798,50 +769,84 @@ while (YYID (0)) # define YYFPRINTF fprintf # endif -# define YYDPRINTF(Args) \ -do { \ - if (yydebug) \ - YYFPRINTF Args; \ -} while (YYID (0)) +# define YYDPRINTF(Args) \ +do { \ + if (yydebug) \ + YYFPRINTF Args; \ +} while (0) -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ -do { \ - if (yydebug) \ - { \ - YYFPRINTF (stderr, "%s ", Title); \ - yy_symbol_print (stderr, \ - Type, Value); \ - YYFPRINTF (stderr, "\n"); \ - } \ -} while (YYID (0)) +/* YY_LOCATION_PRINT -- Print the location on the stream. + This macro was not mandated originally: define only if we know + we won't break user code: when these are the locations we know. */ -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ +#ifndef YY_LOCATION_PRINT +# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) -#else -static void -yy_symbol_value_print (yyoutput, yytype, yyvaluep) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; +/* Print *YYLOCP on YYO. Private, do not rely on its existence. */ + +YY_ATTRIBUTE_UNUSED +static unsigned +yy_location_print_ (FILE *yyo, YYLTYPE const * const yylocp) +{ + unsigned res = 0; + int end_col = 0 != yylocp->last_column ? yylocp->last_column - 1 : 0; + if (0 <= yylocp->first_line) + { + res += YYFPRINTF (yyo, "%d", yylocp->first_line); + if (0 <= yylocp->first_column) + res += YYFPRINTF (yyo, ".%d", yylocp->first_column); + } + if (0 <= yylocp->last_line) + { + if (yylocp->first_line < yylocp->last_line) + { + res += YYFPRINTF (yyo, "-%d", yylocp->last_line); + if (0 <= end_col) + res += YYFPRINTF (yyo, ".%d", end_col); + } + else if (0 <= end_col && yylocp->first_column < end_col) + res += YYFPRINTF (yyo, "-%d", end_col); + } + return res; + } + +# define YY_LOCATION_PRINT(File, Loc) \ + yy_location_print_ (File, &(Loc)) + +# else +# define YY_LOCATION_PRINT(File, Loc) ((void) 0) +# endif #endif + + +# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ +do { \ + if (yydebug) \ + { \ + YYFPRINTF (stderr, "%s ", Title); \ + yy_symbol_print (stderr, \ + Type, Value, Location); \ + YYFPRINTF (stderr, "\n"); \ + } \ +} while (0) + + +/*----------------------------------------. +| Print this symbol's value on YYOUTPUT. | +`----------------------------------------*/ + +static void +yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) { FILE *yyo = yyoutput; YYUSE (yyo); + YYUSE (yylocationp); if (!yyvaluep) return; # ifdef YYPRINT if (yytype < YYNTOKENS) YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); -# else - YYUSE (yyoutput); # endif YYUSE (yytype); } @@ -851,24 +856,15 @@ yy_symbol_value_print (yyoutput, yytype, yyvaluep) | Print this symbol on YYOUTPUT. | `--------------------------------*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) static void -yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) -#else -static void -yy_symbol_print (yyoutput, yytype, yyvaluep) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; -#endif +yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp) { - if (yytype < YYNTOKENS) - YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); - else - YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); + YYFPRINTF (yyoutput, "%s %s (", + yytype < YYNTOKENS ? "token" : "nterm", yytname[yytype]); - yy_symbol_value_print (yyoutput, yytype, yyvaluep); + YY_LOCATION_PRINT (yyoutput, *yylocationp); + YYFPRINTF (yyoutput, ": "); + yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp); YYFPRINTF (yyoutput, ")"); } @@ -877,16 +873,8 @@ yy_symbol_print (yyoutput, yytype, yyvaluep) | TOP (included). | `------------------------------------------------------------------*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) static void yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop) -#else -static void -yy_stack_print (yybottom, yytop) - yytype_int16 *yybottom; - yytype_int16 *yytop; -#endif { YYFPRINTF (stderr, "Stack now"); for (; yybottom <= yytop; yybottom++) @@ -897,49 +885,42 @@ yy_stack_print (yybottom, yytop) YYFPRINTF (stderr, "\n"); } -# define YY_STACK_PRINT(Bottom, Top) \ -do { \ - if (yydebug) \ - yy_stack_print ((Bottom), (Top)); \ -} while (YYID (0)) +# define YY_STACK_PRINT(Bottom, Top) \ +do { \ + if (yydebug) \ + yy_stack_print ((Bottom), (Top)); \ +} while (0) /*------------------------------------------------. | Report that the YYRULE is going to be reduced. | `------------------------------------------------*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_reduce_print (YYSTYPE *yyvsp, int yyrule) -#else static void -yy_reduce_print (yyvsp, yyrule) - YYSTYPE *yyvsp; - int yyrule; -#endif +yy_reduce_print (yytype_int16 *yyssp, YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule) { + unsigned long int yylno = yyrline[yyrule]; int yynrhs = yyr2[yyrule]; int yyi; - unsigned long int yylno = yyrline[yyrule]; YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", - yyrule - 1, yylno); + yyrule - 1, yylno); /* The symbols being reduced. */ for (yyi = 0; yyi < yynrhs; yyi++) { YYFPRINTF (stderr, " $%d = ", yyi + 1); - yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], - &(yyvsp[(yyi + 1) - (yynrhs)]) - ); + yy_symbol_print (stderr, + yystos[yyssp[yyi + 1 - yynrhs]], + &(yyvsp[(yyi + 1) - (yynrhs)]) + , &(yylsp[(yyi + 1) - (yynrhs)]) ); YYFPRINTF (stderr, "\n"); } } -# define YY_REDUCE_PRINT(Rule) \ -do { \ - if (yydebug) \ - yy_reduce_print (yyvsp, Rule); \ -} while (YYID (0)) +# define YY_REDUCE_PRINT(Rule) \ +do { \ + if (yydebug) \ + yy_reduce_print (yyssp, yyvsp, yylsp, Rule); \ +} while (0) /* Nonzero means print parse trace. It is left uninitialized so that multiple parsers can coexist. */ @@ -953,7 +934,7 @@ int yydebug; /* YYINITDEPTH -- initial size of the parser's stacks. */ -#ifndef YYINITDEPTH +#ifndef YYINITDEPTH # define YYINITDEPTH 200 #endif @@ -976,15 +957,8 @@ int yydebug; # define yystrlen strlen # else /* Return the length of YYSTR. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) static YYSIZE_T yystrlen (const char *yystr) -#else -static YYSIZE_T -yystrlen (yystr) - const char *yystr; -#endif { YYSIZE_T yylen; for (yylen = 0; yystr[yylen]; yylen++) @@ -1000,16 +974,8 @@ yystrlen (yystr) # else /* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in YYDEST. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) static char * yystpcpy (char *yydest, const char *yysrc) -#else -static char * -yystpcpy (yydest, yysrc) - char *yydest; - const char *yysrc; -#endif { char *yyd = yydest; const char *yys = yysrc; @@ -1039,27 +1005,27 @@ yytnamerr (char *yyres, const char *yystr) char const *yyp = yystr; for (;;) - switch (*++yyp) - { - case '\'': - case ',': - goto do_not_strip_quotes; - - case '\\': - if (*++yyp != '\\') - goto do_not_strip_quotes; - /* Fall through. */ - default: - if (yyres) - yyres[yyn] = *yyp; - yyn++; - break; - - case '"': - if (yyres) - yyres[yyn] = '\0'; - return yyn; - } + switch (*++yyp) + { + case '\'': + case ',': + goto do_not_strip_quotes; + + case '\\': + if (*++yyp != '\\') + goto do_not_strip_quotes; + /* Fall through. */ + default: + if (yyres) + yyres[yyn] = *yyp; + yyn++; + break; + + case '"': + if (yyres) + yyres[yyn] = '\0'; + return yyn; + } do_not_strip_quotes: ; } @@ -1082,11 +1048,11 @@ static int yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg, yytype_int16 *yyssp, int yytoken) { - YYSIZE_T yysize0 = yytnamerr (YY_NULL, yytname[yytoken]); + YYSIZE_T yysize0 = yytnamerr (YY_NULLPTR, yytname[yytoken]); YYSIZE_T yysize = yysize0; enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; /* Internationalized format string. */ - const char *yyformat = YY_NULL; + const char *yyformat = YY_NULLPTR; /* Arguments of yyformat. */ char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; /* Number of reported tokens (one for the "unexpected", one per @@ -1094,10 +1060,6 @@ yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg, int yycount = 0; /* There are many possibilities here to consider: - - Assume YYFAIL is not used. It's too flawed to consider. See - - for details. YYERROR is fine as it does not invoke this - function. - If this state is a consistent state with a default action, then the only way this function was invoked is if the default action is an error action. In that case, don't check for expected @@ -1147,7 +1109,7 @@ yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg, } yyarg[yycount++] = yytname[yyx]; { - YYSIZE_T yysize1 = yysize + yytnamerr (YY_NULL, yytname[yyx]); + YYSIZE_T yysize1 = yysize + yytnamerr (YY_NULLPTR, yytname[yyx]); if (! (yysize <= yysize1 && yysize1 <= YYSTACK_ALLOC_MAXIMUM)) return 2; @@ -1214,26 +1176,18 @@ yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg, | Release the memory associated to this symbol. | `-----------------------------------------------*/ -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep) -#else static void -yydestruct (yymsg, yytype, yyvaluep) - const char *yymsg; - int yytype; - YYSTYPE *yyvaluep; -#endif +yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp) { YYUSE (yyvaluep); - + YYUSE (yylocationp); if (!yymsg) yymsg = "Deleting"; YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); + YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN YYUSE (yytype); + YY_IGNORE_MAYBE_UNINITIALIZED_END } @@ -1242,18 +1196,14 @@ yydestruct (yymsg, yytype, yyvaluep) /* The lookahead symbol. */ int yychar; - -#ifndef YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN -# define YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN -# define YY_IGNORE_MAYBE_UNINITIALIZED_END -#endif -#ifndef YY_INITIAL_VALUE -# define YY_INITIAL_VALUE(Value) /* Nothing. */ -#endif - /* The semantic value of the lookahead symbol. */ -YYSTYPE yylval YY_INITIAL_VALUE(yyval_default); - +YYSTYPE yylval; +/* Location data for the lookahead symbol. */ +YYLTYPE yylloc +# if defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL + = { 1, 1, 1, 1 } +# endif +; /* Number of syntax errors so far. */ int yynerrs; @@ -1262,35 +1212,17 @@ int yynerrs; | yyparse. | `----------*/ -#ifdef YYPARSE_PARAM -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void *YYPARSE_PARAM) -#else -int -yyparse (YYPARSE_PARAM) - void *YYPARSE_PARAM; -#endif -#else /* ! YYPARSE_PARAM */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) int yyparse (void) -#else -int -yyparse () - -#endif -#endif { int yystate; /* Number of tokens to shift before error messages enabled. */ int yyerrstatus; /* The stacks and their tools: - `yyss': related to states. - `yyvs': related to semantic values. + 'yyss': related to states. + 'yyvs': related to semantic values. + 'yyls': related to locations. Refer to the stacks through separate pointers, to allow yyoverflow to reallocate them elsewhere. */ @@ -1305,6 +1237,14 @@ yyparse () YYSTYPE *yyvs; YYSTYPE *yyvsp; + /* The location stack. */ + YYLTYPE yylsa[YYINITDEPTH]; + YYLTYPE *yyls; + YYLTYPE *yylsp; + + /* The locations where the error started and ended. */ + YYLTYPE yyerror_range[3]; + YYSIZE_T yystacksize; int yyn; @@ -1314,6 +1254,7 @@ yyparse () /* The variables used to return semantic value and location from the action routines. */ YYSTYPE yyval; + YYLTYPE yyloc; #if YYERROR_VERBOSE /* Buffer for error messages, and its allocated size. */ @@ -1322,7 +1263,7 @@ yyparse () YYSIZE_T yymsg_alloc = sizeof yymsgbuf; #endif -#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N)) /* The number of symbols on the RHS of the reduced rule. Keep to zero when no symbol should be popped. */ @@ -1330,6 +1271,7 @@ yyparse () yyssp = yyss = yyssa; yyvsp = yyvs = yyvsa; + yylsp = yyls = yylsa; yystacksize = YYINITDEPTH; YYDPRINTF ((stderr, "Starting parse\n")); @@ -1338,6 +1280,7 @@ yyparse () yyerrstatus = 0; yynerrs = 0; yychar = YYEMPTY; /* Cause a token to be read. */ + yylsp[0] = yylloc; goto yysetstate; /*------------------------------------------------------------. @@ -1358,23 +1301,26 @@ yyparse () #ifdef yyoverflow { - /* Give user a chance to reallocate the stack. Use copies of - these so that the &'s don't force the real ones into - memory. */ - YYSTYPE *yyvs1 = yyvs; - yytype_int16 *yyss1 = yyss; - - /* Each stack pointer address is followed by the size of the - data in use in that stack, in bytes. This used to be a - conditional around just the two extra args, but that might - be undefined if yyoverflow is a macro. */ - yyoverflow (YY_("memory exhausted"), - &yyss1, yysize * sizeof (*yyssp), - &yyvs1, yysize * sizeof (*yyvsp), - &yystacksize); - - yyss = yyss1; - yyvs = yyvs1; + /* Give user a chance to reallocate the stack. Use copies of + these so that the &'s don't force the real ones into + memory. */ + YYSTYPE *yyvs1 = yyvs; + yytype_int16 *yyss1 = yyss; + YYLTYPE *yyls1 = yyls; + + /* Each stack pointer address is followed by the size of the + data in use in that stack, in bytes. This used to be a + conditional around just the two extra args, but that might + be undefined if yyoverflow is a macro. */ + yyoverflow (YY_("memory exhausted"), + &yyss1, yysize * sizeof (*yyssp), + &yyvs1, yysize * sizeof (*yyvsp), + &yyls1, yysize * sizeof (*yylsp), + &yystacksize); + + yyls = yyls1; + yyss = yyss1; + yyvs = yyvs1; } #else /* no yyoverflow */ # ifndef YYSTACK_RELOCATE @@ -1382,34 +1328,36 @@ yyparse () # else /* Extend the stack our own way. */ if (YYMAXDEPTH <= yystacksize) - goto yyexhaustedlab; + goto yyexhaustedlab; yystacksize *= 2; if (YYMAXDEPTH < yystacksize) - yystacksize = YYMAXDEPTH; + yystacksize = YYMAXDEPTH; { - yytype_int16 *yyss1 = yyss; - union yyalloc *yyptr = - (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); - if (! yyptr) - goto yyexhaustedlab; - YYSTACK_RELOCATE (yyss_alloc, yyss); - YYSTACK_RELOCATE (yyvs_alloc, yyvs); + yytype_int16 *yyss1 = yyss; + union yyalloc *yyptr = + (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); + if (! yyptr) + goto yyexhaustedlab; + YYSTACK_RELOCATE (yyss_alloc, yyss); + YYSTACK_RELOCATE (yyvs_alloc, yyvs); + YYSTACK_RELOCATE (yyls_alloc, yyls); # undef YYSTACK_RELOCATE - if (yyss1 != yyssa) - YYSTACK_FREE (yyss1); + if (yyss1 != yyssa) + YYSTACK_FREE (yyss1); } # endif #endif /* no yyoverflow */ yyssp = yyss + yysize - 1; yyvsp = yyvs + yysize - 1; + yylsp = yyls + yysize - 1; YYDPRINTF ((stderr, "Stack size increased to %lu\n", - (unsigned long int) yystacksize)); + (unsigned long int) yystacksize)); if (yyss + yystacksize - 1 <= yyssp) - YYABORT; + YYABORT; } YYDPRINTF ((stderr, "Entering state %d\n", yystate)); @@ -1438,7 +1386,7 @@ yybackup: if (yychar == YYEMPTY) { YYDPRINTF ((stderr, "Reading a token: ")); - yychar = YYLEX; + yychar = yylex (); } if (yychar <= YYEOF) @@ -1481,7 +1429,7 @@ yybackup: YY_IGNORE_MAYBE_UNINITIALIZED_BEGIN *++yyvsp = yylval; YY_IGNORE_MAYBE_UNINITIALIZED_END - + *++yylsp = yylloc; goto yynewstate; @@ -1503,7 +1451,7 @@ yyreduce: yylen = yyr2[yyn]; /* If YYLEN is nonzero, implement the default value of the action: - `$$ = $1'. + '$$ = $1'. Otherwise, the following line sets YYVAL to garbage. This behavior is undocumented and Bison @@ -1512,287 +1460,320 @@ yyreduce: GCC warning that YYVAL may be used uninitialized. */ yyval = yyvsp[1-yylen]; - + /* Default location. */ + YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen); YY_REDUCE_PRINT (yyn); switch (yyn) { case 2: -/* Line 1787 of yacc.c */ -#line 110 "dtc-parser.y" +#line 109 "dtc-parser.y" /* yacc.c:1646 */ { - the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), - guess_boot_cpuid((yyvsp[(4) - (4)].node))); + (yyvsp[0].node)->is_plugin = (yyvsp[-2].is_plugin); + the_boot_info = build_boot_info((yyvsp[-1].re), (yyvsp[0].node), + guess_boot_cpuid((yyvsp[0].node))); } +#line 1476 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 3: -/* Line 1787 of yacc.c */ -#line 118 "dtc-parser.y" +#line 118 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.re) = NULL; + (yyval.is_plugin) = false; } +#line 1484 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 4: -/* Line 1787 of yacc.c */ -#line 122 "dtc-parser.y" +#line 122 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re)); + (yyval.is_plugin) = true; } +#line 1492 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 5: -/* Line 1787 of yacc.c */ -#line 129 "dtc-parser.y" +#line 129 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.re) = build_reserve_entry((yyvsp[(2) - (4)].integer), (yyvsp[(3) - (4)].integer)); + (yyval.re) = NULL; } +#line 1500 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 6: -/* Line 1787 of yacc.c */ -#line 133 "dtc-parser.y" +#line 133 "dtc-parser.y" /* yacc.c:1646 */ { - add_label(&(yyvsp[(2) - (2)].re)->labels, (yyvsp[(1) - (2)].labelref)); - (yyval.re) = (yyvsp[(2) - (2)].re); + (yyval.re) = chain_reserve_entry((yyvsp[-1].re), (yyvsp[0].re)); } +#line 1508 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 7: -/* Line 1787 of yacc.c */ -#line 141 "dtc-parser.y" +#line 140 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.node) = name_node((yyvsp[(2) - (2)].node), ""); + (yyval.re) = build_reserve_entry((yyvsp[-2].integer), (yyvsp[-1].integer)); } +#line 1516 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 8: -/* Line 1787 of yacc.c */ -#line 145 "dtc-parser.y" +#line 144 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.node) = merge_nodes((yyvsp[(1) - (3)].node), (yyvsp[(3) - (3)].node)); + add_label(&(yyvsp[0].re)->labels, (yyvsp[-1].labelref)); + (yyval.re) = (yyvsp[0].re); } +#line 1525 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 9: -/* Line 1787 of yacc.c */ -#line 149 "dtc-parser.y" +#line 152 "dtc-parser.y" /* yacc.c:1646 */ { - struct node *target = get_node_by_ref((yyvsp[(1) - (3)].node), (yyvsp[(2) - (3)].labelref)); - - if (target) - merge_nodes(target, (yyvsp[(3) - (3)].node)); - else - print_error("label or path, '%s', not found", (yyvsp[(2) - (3)].labelref)); - (yyval.node) = (yyvsp[(1) - (3)].node); + (yyval.node) = name_node((yyvsp[0].node), ""); } +#line 1533 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 10: -/* Line 1787 of yacc.c */ -#line 159 "dtc-parser.y" +#line 156 "dtc-parser.y" /* yacc.c:1646 */ { - struct node *target = get_node_by_ref((yyvsp[(1) - (4)].node), (yyvsp[(3) - (4)].labelref)); - - if (!target) - print_error("label or path, '%s', not found", (yyvsp[(3) - (4)].labelref)); - else - delete_node(target); - - (yyval.node) = (yyvsp[(1) - (4)].node); + (yyval.node) = merge_nodes((yyvsp[-2].node), (yyvsp[0].node)); } +#line 1541 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 11: -/* Line 1787 of yacc.c */ -#line 173 "dtc-parser.y" +#line 161 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist)); + struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref)); + + add_label(&target->labels, (yyvsp[-2].labelref)); + if (target) + merge_nodes(target, (yyvsp[0].node)); + else + ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref)); + (yyval.node) = (yyvsp[-3].node); } +#line 1556 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 12: -/* Line 1787 of yacc.c */ -#line 180 "dtc-parser.y" +#line 172 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.proplist) = NULL; + struct node *target = get_node_by_ref((yyvsp[-2].node), (yyvsp[-1].labelref)); + + if (target) + merge_nodes(target, (yyvsp[0].node)); + else + ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref)); + (yyval.node) = (yyvsp[-2].node); } +#line 1570 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 13: -/* Line 1787 of yacc.c */ -#line 184 "dtc-parser.y" +#line 182 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist)); + struct node *target = get_node_by_ref((yyvsp[-3].node), (yyvsp[-1].labelref)); + + if (target) + delete_node(target); + else + ERROR(&(yylsp[-1]), "Label or path %s not found", (yyvsp[-1].labelref)); + + + (yyval.node) = (yyvsp[-3].node); } +#line 1586 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 14: -/* Line 1787 of yacc.c */ -#line 191 "dtc-parser.y" +#line 197 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.prop) = build_property((yyvsp[(1) - (4)].propnodename), (yyvsp[(3) - (4)].data)); + (yyval.node) = build_node((yyvsp[-3].proplist), (yyvsp[-2].nodelist)); } +#line 1594 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 15: -/* Line 1787 of yacc.c */ -#line 195 "dtc-parser.y" +#line 204 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.prop) = build_property((yyvsp[(1) - (2)].propnodename), empty_data); + (yyval.proplist) = NULL; } +#line 1602 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 16: -/* Line 1787 of yacc.c */ -#line 199 "dtc-parser.y" +#line 208 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.prop) = build_property_delete((yyvsp[(2) - (3)].propnodename)); + (yyval.proplist) = chain_property((yyvsp[0].prop), (yyvsp[-1].proplist)); } +#line 1610 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 17: -/* Line 1787 of yacc.c */ -#line 203 "dtc-parser.y" +#line 215 "dtc-parser.y" /* yacc.c:1646 */ { - add_label(&(yyvsp[(2) - (2)].prop)->labels, (yyvsp[(1) - (2)].labelref)); - (yyval.prop) = (yyvsp[(2) - (2)].prop); + (yyval.prop) = build_property((yyvsp[-3].propnodename), (yyvsp[-1].data)); } +#line 1618 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 18: -/* Line 1787 of yacc.c */ -#line 211 "dtc-parser.y" +#line 219 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data)); + (yyval.prop) = build_property((yyvsp[-1].propnodename), empty_data); } +#line 1626 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 19: -/* Line 1787 of yacc.c */ -#line 215 "dtc-parser.y" +#line 223 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.data) = data_merge((yyvsp[(1) - (3)].data), (yyvsp[(2) - (3)].array).data); + (yyval.prop) = build_property_delete((yyvsp[-1].propnodename)); } +#line 1634 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 20: -/* Line 1787 of yacc.c */ -#line 219 "dtc-parser.y" +#line 227 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data)); + add_label(&(yyvsp[0].prop)->labels, (yyvsp[-1].labelref)); + (yyval.prop) = (yyvsp[0].prop); } +#line 1643 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 21: -/* Line 1787 of yacc.c */ -#line 223 "dtc-parser.y" +#line 235 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref)); + (yyval.data) = data_merge((yyvsp[-1].data), (yyvsp[0].data)); } +#line 1651 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 22: -/* Line 1787 of yacc.c */ -#line 227 "dtc-parser.y" +#line 239 "dtc-parser.y" /* yacc.c:1646 */ { - FILE *f = srcfile_relative_open((yyvsp[(4) - (9)].data).val, NULL); + (yyval.data) = data_merge((yyvsp[-2].data), (yyvsp[-1].array).data); + } +#line 1659 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 23: +#line 243 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_merge((yyvsp[-3].data), (yyvsp[-1].data)); + } +#line 1667 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 24: +#line 247 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.data) = data_add_marker((yyvsp[-1].data), REF_PATH, (yyvsp[0].labelref)); + } +#line 1675 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 25: +#line 251 "dtc-parser.y" /* yacc.c:1646 */ + { + FILE *f = srcfile_relative_open((yyvsp[-5].data).val, NULL); struct data d; - if ((yyvsp[(6) - (9)].integer) != 0) - if (fseek(f, (yyvsp[(6) - (9)].integer), SEEK_SET) != 0) - print_error("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)(yyvsp[(6) - (9)].integer), - (yyvsp[(4) - (9)].data).val, - strerror(errno)); + if ((yyvsp[-3].integer) != 0) + if (fseek(f, (yyvsp[-3].integer), SEEK_SET) != 0) + die("Couldn't seek to offset %llu in \"%s\": %s", + (unsigned long long)(yyvsp[-3].integer), (yyvsp[-5].data).val, + strerror(errno)); - d = data_copy_file(f, (yyvsp[(8) - (9)].integer)); + d = data_copy_file(f, (yyvsp[-1].integer)); - (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d); + (yyval.data) = data_merge((yyvsp[-8].data), d); fclose(f); } +#line 1695 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 23: -/* Line 1787 of yacc.c */ -#line 244 "dtc-parser.y" + case 26: +#line 267 "dtc-parser.y" /* yacc.c:1646 */ { - FILE *f = srcfile_relative_open((yyvsp[(4) - (5)].data).val, NULL); + FILE *f = srcfile_relative_open((yyvsp[-1].data).val, NULL); struct data d = empty_data; d = data_copy_file(f, -1); - (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d); + (yyval.data) = data_merge((yyvsp[-4].data), d); fclose(f); } +#line 1709 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 24: -/* Line 1787 of yacc.c */ -#line 254 "dtc-parser.y" + case 27: +#line 277 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); } +#line 1717 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 25: -/* Line 1787 of yacc.c */ -#line 261 "dtc-parser.y" + case 28: +#line 284 "dtc-parser.y" /* yacc.c:1646 */ { (yyval.data) = empty_data; } +#line 1725 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 26: -/* Line 1787 of yacc.c */ -#line 265 "dtc-parser.y" + case 29: +#line 288 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.data) = (yyvsp[(1) - (2)].data); + (yyval.data) = (yyvsp[-1].data); } +#line 1733 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 27: -/* Line 1787 of yacc.c */ -#line 269 "dtc-parser.y" + case 30: +#line 292 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); } +#line 1741 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 28: -/* Line 1787 of yacc.c */ -#line 276 "dtc-parser.y" + case 31: +#line 299 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.array).data = empty_data; - (yyval.array).bits = eval_literal((yyvsp[(2) - (3)].literal), 0, 7); - - if (((yyval.array).bits != 8) && - ((yyval.array).bits != 16) && - ((yyval.array).bits != 32) && - ((yyval.array).bits != 64)) - { - print_error("Only 8, 16, 32 and 64-bit elements" - " are currently supported"); - (yyval.array).bits = 32; + unsigned long long bits; + + bits = (yyvsp[-1].integer); + + if ((bits != 8) && (bits != 16) && + (bits != 32) && (bits != 64)) { + ERROR(&(yylsp[-1]), "Array elements must be" + " 8, 16, 32 or 64-bits"); + bits = 32; } + + (yyval.array).data = empty_data; + (yyval.array).bits = bits; } +#line 1761 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 29: -/* Line 1787 of yacc.c */ -#line 291 "dtc-parser.y" + case 32: +#line 315 "dtc-parser.y" /* yacc.c:1646 */ { (yyval.array).data = empty_data; (yyval.array).bits = 32; } +#line 1770 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 30: -/* Line 1787 of yacc.c */ -#line 296 "dtc-parser.y" + case 33: +#line 320 "dtc-parser.y" /* yacc.c:1646 */ { - if ((yyvsp[(1) - (2)].array).bits < 64) { - uint64_t mask = (1ULL << (yyvsp[(1) - (2)].array).bits) - 1; + if ((yyvsp[-1].array).bits < 64) { + uint64_t mask = (1ULL << (yyvsp[-1].array).bits) - 1; /* * Bits above mask must either be all zero * (positive within range of mask) or all one @@ -1801,275 +1782,258 @@ yyreduce: * within the mask to one (i.e. | in the * mask), all bits are one. */ - if (((yyvsp[(2) - (2)].integer) > mask) && (((yyvsp[(2) - (2)].integer) | mask) != -1ULL)) - print_error( - "integer value out of range " - "%016lx (%d bits)", (yyvsp[(1) - (2)].array).bits); + if (((yyvsp[0].integer) > mask) && (((yyvsp[0].integer) | mask) != -1ULL)) + ERROR(&(yylsp[0]), "Value out of range for" + " %d-bit array element", (yyvsp[-1].array).bits); } - (yyval.array).data = data_append_integer((yyvsp[(1) - (2)].array).data, (yyvsp[(2) - (2)].integer), (yyvsp[(1) - (2)].array).bits); + (yyval.array).data = data_append_integer((yyvsp[-1].array).data, (yyvsp[0].integer), (yyvsp[-1].array).bits); } +#line 1793 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 31: -/* Line 1787 of yacc.c */ -#line 316 "dtc-parser.y" + case 34: +#line 339 "dtc-parser.y" /* yacc.c:1646 */ { - uint64_t val = ~0ULL >> (64 - (yyvsp[(1) - (2)].array).bits); + uint64_t val = ~0ULL >> (64 - (yyvsp[-1].array).bits); - if ((yyvsp[(1) - (2)].array).bits == 32) - (yyvsp[(1) - (2)].array).data = data_add_marker((yyvsp[(1) - (2)].array).data, + if ((yyvsp[-1].array).bits == 32) + (yyvsp[-1].array).data = data_add_marker((yyvsp[-1].array).data, REF_PHANDLE, - (yyvsp[(2) - (2)].labelref)); + (yyvsp[0].labelref)); else - print_error("References are only allowed in " + ERROR(&(yylsp[0]), "References are only allowed in " "arrays with 32-bit elements."); - (yyval.array).data = data_append_integer((yyvsp[(1) - (2)].array).data, val, (yyvsp[(1) - (2)].array).bits); - } - break; - - case 32: -/* Line 1787 of yacc.c */ -#line 330 "dtc-parser.y" - { - (yyval.array).data = data_add_marker((yyvsp[(1) - (2)].array).data, LABEL, (yyvsp[(2) - (2)].labelref)); - } - break; - - case 33: -/* Line 1787 of yacc.c */ -#line 337 "dtc-parser.y" - { - (yyval.integer) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64); - } - break; - - case 34: -/* Line 1787 of yacc.c */ -#line 341 "dtc-parser.y" - { - (yyval.integer) = eval_char_literal((yyvsp[(1) - (1)].literal)); + (yyval.array).data = data_append_integer((yyvsp[-1].array).data, val, (yyvsp[-1].array).bits); } +#line 1811 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 35: -/* Line 1787 of yacc.c */ -#line 345 "dtc-parser.y" +#line 353 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.integer) = (yyvsp[(2) - (3)].integer); + (yyval.array).data = data_add_marker((yyvsp[-1].array).data, LABEL, (yyvsp[0].labelref)); } +#line 1819 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 38: -/* Line 1787 of yacc.c */ -#line 356 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (5)].integer) ? (yyvsp[(3) - (5)].integer) : (yyvsp[(5) - (5)].integer); } - break; - - case 40: -/* Line 1787 of yacc.c */ -#line 361 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) || (yyvsp[(3) - (3)].integer); } +#line 362 "dtc-parser.y" /* yacc.c:1646 */ + { + (yyval.integer) = (yyvsp[-1].integer); + } +#line 1827 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 42: -/* Line 1787 of yacc.c */ -#line 366 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) && (yyvsp[(3) - (3)].integer); } + case 41: +#line 373 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-4].integer) ? (yyvsp[-2].integer) : (yyvsp[0].integer); } +#line 1833 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 44: -/* Line 1787 of yacc.c */ -#line 371 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) | (yyvsp[(3) - (3)].integer); } + case 43: +#line 378 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) || (yyvsp[0].integer); } +#line 1839 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 46: -/* Line 1787 of yacc.c */ -#line 376 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) ^ (yyvsp[(3) - (3)].integer); } + case 45: +#line 383 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) && (yyvsp[0].integer); } +#line 1845 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 48: -/* Line 1787 of yacc.c */ -#line 381 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) & (yyvsp[(3) - (3)].integer); } + case 47: +#line 388 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) | (yyvsp[0].integer); } +#line 1851 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 50: -/* Line 1787 of yacc.c */ -#line 386 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) == (yyvsp[(3) - (3)].integer); } + case 49: +#line 393 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) ^ (yyvsp[0].integer); } +#line 1857 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 51: -/* Line 1787 of yacc.c */ -#line 387 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) != (yyvsp[(3) - (3)].integer); } +#line 398 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) & (yyvsp[0].integer); } +#line 1863 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 53: -/* Line 1787 of yacc.c */ -#line 392 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) < (yyvsp[(3) - (3)].integer); } +#line 403 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) == (yyvsp[0].integer); } +#line 1869 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 54: -/* Line 1787 of yacc.c */ -#line 393 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) > (yyvsp[(3) - (3)].integer); } - break; - - case 55: -/* Line 1787 of yacc.c */ -#line 394 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) <= (yyvsp[(3) - (3)].integer); } +#line 404 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) != (yyvsp[0].integer); } +#line 1875 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 56: -/* Line 1787 of yacc.c */ -#line 395 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) >= (yyvsp[(3) - (3)].integer); } +#line 409 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) < (yyvsp[0].integer); } +#line 1881 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 57: -/* Line 1787 of yacc.c */ -#line 399 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) << (yyvsp[(3) - (3)].integer); } +#line 410 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) > (yyvsp[0].integer); } +#line 1887 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 58: -/* Line 1787 of yacc.c */ -#line 400 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) >> (yyvsp[(3) - (3)].integer); } +#line 411 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) <= (yyvsp[0].integer); } +#line 1893 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 59: +#line 412 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) >= (yyvsp[0].integer); } +#line 1899 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 60: -/* Line 1787 of yacc.c */ -#line 405 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) + (yyvsp[(3) - (3)].integer); } +#line 416 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) << (yyvsp[0].integer); } +#line 1905 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 61: -/* Line 1787 of yacc.c */ -#line 406 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) - (yyvsp[(3) - (3)].integer); } +#line 417 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) >> (yyvsp[0].integer); } +#line 1911 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 63: -/* Line 1787 of yacc.c */ -#line 411 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) * (yyvsp[(3) - (3)].integer); } +#line 422 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) + (yyvsp[0].integer); } +#line 1917 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 64: -/* Line 1787 of yacc.c */ -#line 412 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) / (yyvsp[(3) - (3)].integer); } +#line 423 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) - (yyvsp[0].integer); } +#line 1923 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 66: +#line 428 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) * (yyvsp[0].integer); } +#line 1929 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 65: -/* Line 1787 of yacc.c */ -#line 413 "dtc-parser.y" - { (yyval.integer) = (yyvsp[(1) - (3)].integer) % (yyvsp[(3) - (3)].integer); } + case 67: +#line 429 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) / (yyvsp[0].integer); } +#line 1935 "dtc-parser.tab.c" /* yacc.c:1646 */ break; case 68: -/* Line 1787 of yacc.c */ -#line 419 "dtc-parser.y" - { (yyval.integer) = -(yyvsp[(2) - (2)].integer); } +#line 430 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = (yyvsp[-2].integer) % (yyvsp[0].integer); } +#line 1941 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 69: -/* Line 1787 of yacc.c */ -#line 420 "dtc-parser.y" - { (yyval.integer) = ~(yyvsp[(2) - (2)].integer); } + case 71: +#line 436 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = -(yyvsp[0].integer); } +#line 1947 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 70: -/* Line 1787 of yacc.c */ -#line 421 "dtc-parser.y" - { (yyval.integer) = !(yyvsp[(2) - (2)].integer); } + case 72: +#line 437 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = ~(yyvsp[0].integer); } +#line 1953 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 71: -/* Line 1787 of yacc.c */ -#line 426 "dtc-parser.y" + case 73: +#line 438 "dtc-parser.y" /* yacc.c:1646 */ + { (yyval.integer) = !(yyvsp[0].integer); } +#line 1959 "dtc-parser.tab.c" /* yacc.c:1646 */ + break; + + case 74: +#line 443 "dtc-parser.y" /* yacc.c:1646 */ { (yyval.data) = empty_data; } +#line 1967 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 72: -/* Line 1787 of yacc.c */ -#line 430 "dtc-parser.y" + case 75: +#line 447 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte)); + (yyval.data) = data_append_byte((yyvsp[-1].data), (yyvsp[0].byte)); } +#line 1975 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 73: -/* Line 1787 of yacc.c */ -#line 434 "dtc-parser.y" + case 76: +#line 451 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref)); + (yyval.data) = data_add_marker((yyvsp[-1].data), LABEL, (yyvsp[0].labelref)); } +#line 1983 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 74: -/* Line 1787 of yacc.c */ -#line 441 "dtc-parser.y" + case 77: +#line 458 "dtc-parser.y" /* yacc.c:1646 */ { (yyval.nodelist) = NULL; } +#line 1991 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 75: -/* Line 1787 of yacc.c */ -#line 445 "dtc-parser.y" + case 78: +#line 462 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist)); + (yyval.nodelist) = chain_node((yyvsp[-1].node), (yyvsp[0].nodelist)); } +#line 1999 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 76: -/* Line 1787 of yacc.c */ -#line 449 "dtc-parser.y" + case 79: +#line 466 "dtc-parser.y" /* yacc.c:1646 */ { - print_error("syntax error: properties must precede subnodes"); + ERROR(&(yylsp[0]), "Properties must precede subnodes"); YYERROR; } +#line 2008 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 77: -/* Line 1787 of yacc.c */ -#line 457 "dtc-parser.y" + case 80: +#line 474 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.node) = name_node((yyvsp[(2) - (2)].node), (yyvsp[(1) - (2)].propnodename)); + (yyval.node) = name_node((yyvsp[0].node), (yyvsp[-1].propnodename)); } +#line 2016 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 78: -/* Line 1787 of yacc.c */ -#line 461 "dtc-parser.y" + case 81: +#line 478 "dtc-parser.y" /* yacc.c:1646 */ { - (yyval.node) = name_node(build_node_delete(), (yyvsp[(2) - (3)].propnodename)); + (yyval.node) = name_node(build_node_delete(), (yyvsp[-1].propnodename)); } +#line 2024 "dtc-parser.tab.c" /* yacc.c:1646 */ break; - case 79: -/* Line 1787 of yacc.c */ -#line 465 "dtc-parser.y" + case 82: +#line 482 "dtc-parser.y" /* yacc.c:1646 */ { - add_label(&(yyvsp[(2) - (2)].node)->labels, (yyvsp[(1) - (2)].labelref)); - (yyval.node) = (yyvsp[(2) - (2)].node); + add_label(&(yyvsp[0].node)->labels, (yyvsp[-1].labelref)); + (yyval.node) = (yyvsp[0].node); } +#line 2033 "dtc-parser.tab.c" /* yacc.c:1646 */ break; -/* Line 1787 of yacc.c */ -#line 2073 "dtc-parser.tab.c" +#line 2037 "dtc-parser.tab.c" /* yacc.c:1646 */ default: break; } /* User semantic actions sometimes alter yychar, and that requires @@ -2090,8 +2054,9 @@ yyreduce: YY_STACK_PRINT (yyss, yyssp); *++yyvsp = yyval; + *++yylsp = yyloc; - /* Now `shift' the result of the reduction. Determine what state + /* Now 'shift' the result of the reduction. Determine what state that goes to, based on the state we popped back to and the rule number reduced by. */ @@ -2106,9 +2071,9 @@ yyreduce: goto yynewstate; -/*------------------------------------. -| yyerrlab -- here on detecting error | -`------------------------------------*/ +/*--------------------------------------. +| yyerrlab -- here on detecting error. | +`--------------------------------------*/ yyerrlab: /* Make sure we have latest lookahead translation. See comments at user semantic actions for why this is necessary. */ @@ -2154,25 +2119,25 @@ yyerrlab: #endif } - + yyerror_range[1] = yylloc; if (yyerrstatus == 3) { /* If just tried and failed to reuse lookahead token after an - error, discard it. */ + error, discard it. */ if (yychar <= YYEOF) - { - /* Return failure if at end of input. */ - if (yychar == YYEOF) - YYABORT; - } + { + /* Return failure if at end of input. */ + if (yychar == YYEOF) + YYABORT; + } else - { - yydestruct ("Error: discarding", - yytoken, &yylval); - yychar = YYEMPTY; - } + { + yydestruct ("Error: discarding", + yytoken, &yylval, &yylloc); + yychar = YYEMPTY; + } } /* Else will try to reuse lookahead token after shifting the error @@ -2191,7 +2156,8 @@ yyerrorlab: if (/*CONSTCOND*/ 0) goto yyerrorlab; - /* Do not reclaim the symbols of the rule which action triggered + yyerror_range[1] = yylsp[1-yylen]; + /* Do not reclaim the symbols of the rule whose action triggered this YYERROR. */ YYPOPSTACK (yylen); yylen = 0; @@ -2204,29 +2170,29 @@ yyerrorlab: | yyerrlab1 -- common code for both syntax error and YYERROR. | `-------------------------------------------------------------*/ yyerrlab1: - yyerrstatus = 3; /* Each real token shifted decrements this. */ + yyerrstatus = 3; /* Each real token shifted decrements this. */ for (;;) { yyn = yypact[yystate]; if (!yypact_value_is_default (yyn)) - { - yyn += YYTERROR; - if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) - { - yyn = yytable[yyn]; - if (0 < yyn) - break; - } - } + { + yyn += YYTERROR; + if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) + { + yyn = yytable[yyn]; + if (0 < yyn) + break; + } + } /* Pop the current state because it cannot handle the error token. */ if (yyssp == yyss) - YYABORT; - + YYABORT; + yyerror_range[1] = *yylsp; yydestruct ("Error: popping", - yystos[yystate], yyvsp); + yystos[yystate], yyvsp, yylsp); YYPOPSTACK (1); yystate = *yyssp; YY_STACK_PRINT (yyss, yyssp); @@ -2236,6 +2202,11 @@ yyerrlab1: *++yyvsp = yylval; YY_IGNORE_MAYBE_UNINITIALIZED_END + yyerror_range[2] = yylloc; + /* Using YYLLOC is tempting, but would change the location of + the lookahead. YYLOC is available though. */ + YYLLOC_DEFAULT (yyloc, yyerror_range, 2); + *++yylsp = yyloc; /* Shift the error token. */ YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); @@ -2275,16 +2246,16 @@ yyreturn: user semantic actions for why this is necessary. */ yytoken = YYTRANSLATE (yychar); yydestruct ("Cleanup: discarding lookahead", - yytoken, &yylval); + yytoken, &yylval, &yylloc); } - /* Do not reclaim the symbols of the rule which action triggered + /* Do not reclaim the symbols of the rule whose action triggered this YYABORT or YYACCEPT. */ YYPOPSTACK (yylen); YY_STACK_PRINT (yyss, yyssp); while (yyssp != yyss) { yydestruct ("Cleanup: popping", - yystos[*yyssp], yyvsp); + yystos[*yyssp], yyvsp, yylsp); YYPOPSTACK (1); } #ifndef yyoverflow @@ -2295,72 +2266,12 @@ yyreturn: if (yymsg != yymsgbuf) YYSTACK_FREE (yymsg); #endif - /* Make sure YYID is used. */ - return YYID (yyresult); -} - - -/* Line 2050 of yacc.c */ -#line 471 "dtc-parser.y" - - -void print_error(char const *fmt, ...) -{ - va_list va; - - va_start(va, fmt); - srcpos_verror(&yylloc, fmt, va); - va_end(va); - - treesource_error = 1; + return yyresult; } +#line 488 "dtc-parser.y" /* yacc.c:1906 */ -void yyerror(char const *s) { - print_error("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) { - size_t uls = strspn(e, "UL"); - if (e[uls]) - print_error("bad characters in literal"); - } - if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - print_error("literal out of range"); - else if (errno != 0) - print_error("bad literal"); - return val; -} -static unsigned char eval_char_literal(const char *s) +void yyerror(char const *s) { - int i = 1; - char c = s[0]; - - if (c == '\0') - { - print_error("empty character literal"); - return 0; - } - - /* - * If the first character in the character literal is a \ then process - * the remaining characters as an escape encoding. If the first - * character is neither an escape or a terminator it should be the only - * character in the literal and will be returned. - */ - if (c == '\\') - c = get_escape_char(s, &i); - - if (s[i] != '\0') - print_error("malformed character literal"); - - return c; + ERROR(&yylloc, "%s", s); } diff --git a/scripts/dtc/dtc-parser.tab.h_shipped b/scripts/dtc/dtc-parser.tab.h_shipped index b2e7a86cd85e6..276d0788f8581 100644 --- a/scripts/dtc/dtc-parser.tab.h_shipped +++ b/scripts/dtc/dtc-parser.tab.h_shipped @@ -1,19 +1,19 @@ -/* A Bison parser, made by GNU Bison 2.7.12-4996. */ +/* A Bison parser, made by GNU Bison 3.0.2. */ /* Bison interface for Yacc-like parsers in C - - Copyright (C) 1984, 1989-1990, 2000-2013 Free Software Foundation, Inc. - + + Copyright (C) 1984, 1989-1990, 2000-2013 Free Software Foundation, Inc. + This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. - + This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with this program. If not, see . */ @@ -26,13 +26,13 @@ special exception, which will cause the skeleton and the resulting Bison output files to be licensed under the GNU General Public License without this special exception. - + This special exception was added by the Free Software Foundation in version 2.2 of Bison. */ #ifndef YY_YY_DTC_PARSER_TAB_H_INCLUDED # define YY_YY_DTC_PARSER_TAB_H_INCLUDED -/* Enabling traces. */ +/* Debug traces. */ #ifndef YYDEBUG # define YYDEBUG 0 #endif @@ -40,48 +40,45 @@ extern int yydebug; #endif -/* Tokens. */ +/* Token type. */ #ifndef YYTOKENTYPE # define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - DT_V1 = 258, - DT_MEMRESERVE = 259, - DT_LSHIFT = 260, - DT_RSHIFT = 261, - DT_LE = 262, - DT_GE = 263, - DT_EQ = 264, - DT_NE = 265, - DT_AND = 266, - DT_OR = 267, - DT_BITS = 268, - DT_DEL_PROP = 269, - DT_DEL_NODE = 270, - DT_PROPNODENAME = 271, - DT_LITERAL = 272, - DT_CHAR_LITERAL = 273, - DT_BASE = 274, - DT_BYTE = 275, - DT_STRING = 276, - DT_LABEL = 277, - DT_REF = 278, - DT_INCBIN = 279 - }; + enum yytokentype + { + DT_V1 = 258, + DT_PLUGIN = 259, + DT_MEMRESERVE = 260, + DT_LSHIFT = 261, + DT_RSHIFT = 262, + DT_LE = 263, + DT_GE = 264, + DT_EQ = 265, + DT_NE = 266, + DT_AND = 267, + DT_OR = 268, + DT_BITS = 269, + DT_DEL_PROP = 270, + DT_DEL_NODE = 271, + DT_PROPNODENAME = 272, + DT_LITERAL = 273, + DT_CHAR_LITERAL = 274, + DT_BYTE = 275, + DT_STRING = 276, + DT_LABEL = 277, + DT_REF = 278, + DT_INCBIN = 279 + }; #endif - +/* Value type. */ #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE +typedef union YYSTYPE YYSTYPE; +union YYSTYPE { -/* Line 2053 of yacc.c */ -#line 40 "dtc-parser.y" +#line 39 "dtc-parser.y" /* yacc.c:1909 */ char *propnodename; - char *literal; char *labelref; - unsigned int cbase; uint8_t byte; struct data data; @@ -96,30 +93,31 @@ typedef union YYSTYPE struct node *nodelist; struct reserve_info *re; uint64_t integer; + bool is_plugin; - -/* Line 2053 of yacc.c */ -#line 103 "dtc-parser.tab.h" -} YYSTYPE; +#line 99 "dtc-parser.tab.h" /* yacc.c:1909 */ +}; # define YYSTYPE_IS_TRIVIAL 1 -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ # define YYSTYPE_IS_DECLARED 1 #endif -extern YYSTYPE yylval; - -#ifdef YYPARSE_PARAM -#if defined __STDC__ || defined __cplusplus -int yyparse (void *YYPARSE_PARAM); -#else -int yyparse (); +/* Location type. */ +#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED +typedef struct YYLTYPE YYLTYPE; +struct YYLTYPE +{ + int first_line; + int first_column; + int last_line; + int last_column; +}; +# define YYLTYPE_IS_DECLARED 1 +# define YYLTYPE_IS_TRIVIAL 1 #endif -#else /* ! YYPARSE_PARAM */ -#if defined __STDC__ || defined __cplusplus + + +extern YYSTYPE yylval; +extern YYLTYPE yylloc; int yyparse (void); -#else -int yyparse (); -#endif -#endif /* ! YYPARSE_PARAM */ #endif /* !YY_YY_DTC_PARSER_TAB_H_INCLUDED */ diff --git a/scripts/dtc/dtc-parser.y b/scripts/dtc/dtc-parser.y index f412460f94d74..d23927d992155 100644 --- a/scripts/dtc/dtc-parser.y +++ b/scripts/dtc/dtc-parser.y @@ -17,31 +17,28 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA */ - %{ #include +#include #include "dtc.h" #include "srcpos.h" -YYLTYPE yylloc; - extern int yylex(void); -extern void print_error(char const *fmt, ...); extern void yyerror(char const *s); +#define ERROR(loc, ...) \ + do { \ + srcpos_error((loc), "Error", __VA_ARGS__); \ + treesource_error = true; \ + } while (0) extern struct boot_info *the_boot_info; -extern int treesource_error; - -static unsigned long long eval_literal(const char *s, int base, int bits); -static unsigned char eval_char_literal(const char *s); +extern bool treesource_error; %} %union { char *propnodename; - char *literal; char *labelref; - unsigned int cbase; uint8_t byte; struct data data; @@ -56,18 +53,19 @@ static unsigned char eval_char_literal(const char *s); struct node *nodelist; struct reserve_info *re; uint64_t integer; + bool is_plugin; } %token DT_V1 +%token DT_PLUGIN %token DT_MEMRESERVE %token DT_LSHIFT DT_RSHIFT DT_LE DT_GE DT_EQ DT_NE DT_AND DT_OR %token DT_BITS %token DT_DEL_PROP %token DT_DEL_NODE %token DT_PROPNODENAME -%token DT_LITERAL -%token DT_CHAR_LITERAL -%token DT_BASE +%token DT_LITERAL +%token DT_CHAR_LITERAL %token DT_BYTE %token DT_STRING %token DT_LABEL @@ -76,6 +74,7 @@ static unsigned char eval_char_literal(const char *s); %type propdata %type propdataprefix +%type plugindecl %type memreserve %type memreserves %type arrayprefix @@ -106,10 +105,22 @@ static unsigned char eval_char_literal(const char *s); %% sourcefile: - DT_V1 ';' memreserves devicetree + DT_V1 ';' plugindecl memreserves devicetree + { + $5->is_plugin = $3; + the_boot_info = build_boot_info($4, $5, + guess_boot_cpuid($5)); + } + ; + +plugindecl: + /* empty */ { - the_boot_info = build_boot_info($3, $4, - guess_boot_cpuid($4)); + $$ = false; + } + | DT_PLUGIN ';' + { + $$ = true; } ; @@ -145,6 +156,18 @@ devicetree: { $$ = merge_nodes($1, $3); } + + | devicetree DT_LABEL DT_REF nodedef + { + struct node *target = get_node_by_ref($1, $3); + + add_label(&target->labels, $2); + if (target) + merge_nodes(target, $4); + else + ERROR(&@3, "Label or path %s not found", $3); + $$ = $1; + } | devicetree DT_REF nodedef { struct node *target = get_node_by_ref($1, $2); @@ -152,17 +175,18 @@ devicetree: if (target) merge_nodes(target, $3); else - print_error("label or path, '%s', not found", $2); + ERROR(&@2, "Label or path %s not found", $2); $$ = $1; } | devicetree DT_DEL_NODE DT_REF ';' { struct node *target = get_node_by_ref($1, $3); - if (!target) - print_error("label or path, '%s', not found", $3); - else + if (target) delete_node(target); + else + ERROR(&@3, "Label or path %s not found", $3); + $$ = $1; } @@ -230,10 +254,9 @@ propdata: if ($6 != 0) if (fseek(f, $6, SEEK_SET) != 0) - print_error("Couldn't seek to offset %llu in \"%s\": %s", - (unsigned long long)$6, - $4.val, - strerror(errno)); + die("Couldn't seek to offset %llu in \"%s\": %s", + (unsigned long long)$6, $4.val, + strerror(errno)); d = data_copy_file(f, $8); @@ -274,18 +297,19 @@ propdataprefix: arrayprefix: DT_BITS DT_LITERAL '<' { - $$.data = empty_data; - $$.bits = eval_literal($2, 0, 7); - - if (($$.bits != 8) && - ($$.bits != 16) && - ($$.bits != 32) && - ($$.bits != 64)) - { - print_error("Only 8, 16, 32 and 64-bit elements" - " are currently supported"); - $$.bits = 32; + unsigned long long bits; + + bits = $2; + + if ((bits != 8) && (bits != 16) && + (bits != 32) && (bits != 64)) { + ERROR(&@2, "Array elements must be" + " 8, 16, 32 or 64-bits"); + bits = 32; } + + $$.data = empty_data; + $$.bits = bits; } | '<' { @@ -305,9 +329,8 @@ arrayprefix: * mask), all bits are one. */ if (($2 > mask) && (($2 | mask) != -1ULL)) - print_error( - "integer value out of range " - "%016lx (%d bits)", $1.bits); + ERROR(&@2, "Value out of range for" + " %d-bit array element", $1.bits); } $$.data = data_append_integer($1.data, $2, $1.bits); @@ -321,7 +344,7 @@ arrayprefix: REF_PHANDLE, $2); else - print_error("References are only allowed in " + ERROR(&@2, "References are only allowed in " "arrays with 32-bit elements."); $$.data = data_append_integer($1.data, val, $1.bits); @@ -334,13 +357,7 @@ arrayprefix: integer_prim: DT_LITERAL - { - $$ = eval_literal($1, 0, 64); - } | DT_CHAR_LITERAL - { - $$ = eval_char_literal($1); - } | '(' integer_expr ')' { $$ = $2; @@ -447,7 +464,7 @@ subnodes: } | subnode propdef { - print_error("syntax error: properties must precede subnodes"); + ERROR(&@2, "Properties must precede subnodes"); YYERROR; } ; @@ -470,63 +487,7 @@ subnode: %% -void print_error(char const *fmt, ...) -{ - va_list va; - - va_start(va, fmt); - srcpos_verror(&yylloc, fmt, va); - va_end(va); - - treesource_error = 1; -} - -void yyerror(char const *s) { - print_error("%s", s); -} - -static unsigned long long eval_literal(const char *s, int base, int bits) -{ - unsigned long long val; - char *e; - - errno = 0; - val = strtoull(s, &e, base); - if (*e) { - size_t uls = strspn(e, "UL"); - if (e[uls]) - print_error("bad characters in literal"); - } - if ((errno == ERANGE) - || ((bits < 64) && (val >= (1ULL << bits)))) - print_error("literal out of range"); - else if (errno != 0) - print_error("bad literal"); - return val; -} - -static unsigned char eval_char_literal(const char *s) +void yyerror(char const *s) { - int i = 1; - char c = s[0]; - - if (c == '\0') - { - print_error("empty character literal"); - return 0; - } - - /* - * If the first character in the character literal is a \ then process - * the remaining characters as an escape encoding. If the first - * character is neither an escape or a terminator it should be the only - * character in the literal and will be returned. - */ - if (c == '\\') - c = get_escape_char(s, &i); - - if (s[i] != '\0') - print_error("malformed character literal"); - - return c; + ERROR(&yylloc, "%s", s); } diff --git a/scripts/dtc/dtc.c b/scripts/dtc/dtc.c index e3c96536fd9db..1f8c2852bf14d 100644 --- a/scripts/dtc/dtc.c +++ b/scripts/dtc/dtc.c @@ -18,6 +18,8 @@ * USA */ +#include + #include "dtc.h" #include "srcpos.h" @@ -29,6 +31,7 @@ int reservenum; /* Number of memory reservation slots */ int minsize; /* Minimum blob size */ int padsize; /* Additional padding to blob */ int phandle_format = PHANDLE_BOTH; /* Use linux,phandle or phandle properties */ +int symbol_fixup_support = 0; static void fill_fullpaths(struct node *tree, const char *prefix) { @@ -48,8 +51,10 @@ static void fill_fullpaths(struct node *tree, const char *prefix) } /* Usage related data. */ +#define FDT_VERSION(version) _FDT_VERSION(version) +#define _FDT_VERSION(version) #version static const char usage_synopsis[] = "dtc [options] "; -static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:fb:i:H:sW:E:hv"; +static const char usage_short_opts[] = "qI:O:o:V:d:R:S:p:fb:i:H:sW:E:@hv"; static struct option const usage_long_opts[] = { {"quiet", no_argument, NULL, 'q'}, {"in-format", a_argument, NULL, 'I'}, @@ -67,6 +72,7 @@ static struct option const usage_long_opts[] = { {"phandle", a_argument, NULL, 'H'}, {"warning", a_argument, NULL, 'W'}, {"error", a_argument, NULL, 'E'}, + {"symbols", no_argument, NULL, '@'}, {"help", no_argument, NULL, 'h'}, {"version", no_argument, NULL, 'v'}, {NULL, no_argument, NULL, 0x0}, @@ -82,9 +88,9 @@ static const char * const usage_opts_help[] = { "\t\tdts - device tree source text\n" "\t\tdtb - device tree blob\n" "\t\tasm - assembler source", - "\n\tBlob version to produce, defaults to %d (for dtb and asm output)", //, DEFAULT_FDT_VERSION); + "\n\tBlob version to produce, defaults to "FDT_VERSION(DEFAULT_FDT_VERSION)" (for dtb and asm output)", "\n\tOutput dependency file", - "\n\ttMake space for reserve map entries (for dtb and asm output)", + "\n\tMake space for reserve map entries (for dtb and asm output)", "\n\tMake the blob at least long (extra space)", "\n\tAdd padding to the blob of long (extra space)", "\n\tSet the physical boot cpu", @@ -97,19 +103,65 @@ static const char * const usage_opts_help[] = { "\t\tboth - Both \"linux,phandle\" and \"phandle\" properties", "\n\tEnable/disable warnings (prefix with \"no-\")", "\n\tEnable/disable errors (prefix with \"no-\")", + "\n\tEnable symbols/fixup support", "\n\tPrint this help and exit", "\n\tPrint version and exit", NULL, }; +static const char *guess_type_by_name(const char *fname, const char *fallback) +{ + const char *s; + + s = strrchr(fname, '.'); + if (s == NULL) + return fallback; + if (!strcasecmp(s, ".dts")) + return "dts"; + if (!strcasecmp(s, ".dtb")) + return "dtb"; + return fallback; +} + +static const char *guess_input_format(const char *fname, const char *fallback) +{ + struct stat statbuf; + uint32_t magic; + FILE *f; + + if (stat(fname, &statbuf) != 0) + return fallback; + + if (S_ISDIR(statbuf.st_mode)) + return "fs"; + + if (!S_ISREG(statbuf.st_mode)) + return fallback; + + f = fopen(fname, "r"); + if (f == NULL) + return fallback; + if (fread(&magic, 4, 1, f) != 1) { + fclose(f); + return fallback; + } + fclose(f); + + magic = fdt32_to_cpu(magic); + if (magic == FDT_MAGIC) + return "dtb"; + + return guess_type_by_name(fname, fallback); +} + int main(int argc, char *argv[]) { struct boot_info *bi; - const char *inform = "dts"; - const char *outform = "dts"; + const char *inform = NULL; + const char *outform = NULL; const char *outname = "-"; const char *depname = NULL; - int force = 0, sort = 0; + bool force = false, sort = false; const char *arg; int opt; FILE *outf = NULL; @@ -148,7 +200,7 @@ int main(int argc, char *argv[]) padsize = strtol(optarg, NULL, 0); break; case 'f': - force = 1; + force = true; break; case 'q': quiet++; @@ -174,7 +226,7 @@ int main(int argc, char *argv[]) break; case 's': - sort = 1; + sort = true; break; case 'W': @@ -184,7 +236,9 @@ int main(int argc, char *argv[]) case 'E': parse_checks_option(false, true, optarg); break; - + case '@': + symbol_fixup_support = 1; + break; case 'h': usage(NULL); default: @@ -211,6 +265,17 @@ int main(int argc, char *argv[]) fprintf(depfile, "%s:", outname); } + if (inform == NULL) + inform = guess_input_format(arg, "dts"); + if (outform == NULL) { + outform = guess_type_by_name(outname, NULL); + if (outform == NULL) { + if (streq(inform, "dts")) + outform = "dtb"; + else + outform = "dts"; + } + } if (streq(inform, "dts")) bi = dt_from_source(arg); else if (streq(inform, "fs")) @@ -237,7 +302,7 @@ int main(int argc, char *argv[]) if (streq(outname, "-")) { outf = stdout; } else { - outf = fopen(outname, "w"); + outf = fopen(outname, "wb"); if (! outf) die("Couldn't open output file %s: %s\n", outname, strerror(errno)); diff --git a/scripts/dtc/dtc.h b/scripts/dtc/dtc.h index 264a20cf66a8c..f163b22b14b80 100644 --- a/scripts/dtc/dtc.h +++ b/scripts/dtc/dtc.h @@ -38,9 +38,9 @@ #include "util.h" #ifdef DEBUG -#define debug(fmt,args...) printf(fmt, ##args) +#define debug(...) printf(__VA_ARGS__) #else -#define debug(fmt,args...) +#define debug(...) #endif @@ -54,6 +54,7 @@ extern int reservenum; /* Number of memory reservation slots */ extern int minsize; /* Minimum blob size */ extern int padsize; /* Additional padding to blob */ extern int phandle_format; /* Use linux,phandle or phandle properties */ +extern int symbol_fixup_support;/* enable symbols & fixup support */ #define PHANDLE_LEGACY 0x1 #define PHANDLE_EPAPR 0x2 @@ -88,7 +89,7 @@ struct data { }; -#define empty_data ((struct data){ /* all .members = 0 or NULL */ }) +#define empty_data ((struct data){ 0 /* all .members = 0 or NULL */ }) #define for_each_marker(m) \ for (; (m); (m) = (m)->next) @@ -118,7 +119,7 @@ struct data data_append_align(struct data d, int align); struct data data_add_marker(struct data d, enum markertype type, char *ref); -int data_is_one_string(struct data d); +bool data_is_one_string(struct data d); /* DT constraints */ @@ -127,13 +128,33 @@ int data_is_one_string(struct data d); /* Live trees */ struct label { - int deleted; + bool deleted; char *label; struct label *next; }; +struct fixup_entry { + int offset; + struct node *node; + struct property *prop; + struct fixup_entry *next; + bool local_fixup_generated; +}; + +struct fixup { + char *ref; + struct fixup_entry *entries; + struct fixup *next; +}; + +struct symbol { + struct label *label; + struct node *node; + struct symbol *next; +}; + struct property { - int deleted; + bool deleted; char *name; struct data val; @@ -143,7 +164,7 @@ struct property { }; struct node { - int deleted; + bool deleted; char *name; struct property *proplist; struct node *children; @@ -158,6 +179,13 @@ struct node { int addr_cells, size_cells; struct label *labels; + + struct symbol *symbols; + struct fixup_entry *local_fixups; + bool emit_local_fixup_node; + + bool is_plugin; + struct fixup *fixups; }; #define for_each_label_withdel(l0, l) \ @@ -181,6 +209,18 @@ struct node { for_each_child_withdel(n, c) \ if (!(c)->deleted) +#define for_each_fixup(n, f) \ + for ((f) = (n)->fixups; (f); (f) = (f)->next) + +#define for_each_fixup_entry(f, fe) \ + for ((fe) = (f)->entries; (fe); (fe) = (fe)->next) + +#define for_each_symbol(n, s) \ + for ((s) = (n)->symbols; (s); (s) = (s)->next) + +#define for_each_local_fixup_entry(n, fe) \ + for ((fe) = (n)->local_fixups; (fe); (fe) = (fe)->next) + void add_label(struct label **labels, char *label); void delete_labels(struct label **labels); @@ -247,8 +287,8 @@ void sort_tree(struct boot_info *bi); /* Checks */ -void parse_checks_option(bool warn, bool error, const char *optarg); -void process_checks(int force, struct boot_info *bi); +void parse_checks_option(bool warn, bool error, const char *arg); +void process_checks(bool force, struct boot_info *bi); /* Flattened trees */ diff --git a/scripts/dtc/flattree.c b/scripts/dtc/flattree.c index 665dad7bb465b..238513780a5ba 100644 --- a/scripts/dtc/flattree.c +++ b/scripts/dtc/flattree.c @@ -255,13 +255,211 @@ static int stringtable_insert(struct data *d, const char *str) return i; } +static void emit_local_fixups(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, struct version_info *vi, + struct node *node) +{ + struct fixup_entry *fe, *fen; + struct node *child; + int nameoff, count; + cell_t *buf; + struct data d; + + if (node->emit_local_fixup_node) { + + /* emit the external fixups (do not emit /) */ + if (node != tree) { + emit->beginnode(etarget, NULL); + emit->string(etarget, node->name, 0); + emit->align(etarget, sizeof(cell_t)); + } + + for_each_local_fixup_entry(tree, fe) { + if (fe->node != node || fe->local_fixup_generated) + continue; + + /* count the number of fixup entries */ + count = 0; + for_each_local_fixup_entry(tree, fen) { + if (fen->prop != fe->prop) + continue; + fen->local_fixup_generated = true; + count++; + } + + /* allocate buffer */ + buf = xmalloc(count * sizeof(cell_t)); + + /* collect all the offsets in buffer */ + count = 0; + for_each_local_fixup_entry(tree, fen) { + if (fen->prop != fe->prop) + continue; + fen->local_fixup_generated = true; + buf[count++] = cpu_to_fdt32(fen->offset); + } + d = empty_data; + d.len = count * sizeof(cell_t); + d.val = (char *)buf; + + nameoff = stringtable_insert(strbuf, fe->prop->name); + emit->property(etarget, fe->prop->labels); + emit->cell(etarget, count * sizeof(cell_t)); + emit->cell(etarget, nameoff); + + if ((vi->flags & FTF_VARALIGN) && + (count * sizeof(cell_t)) >= 8) + emit->align(etarget, 8); + + emit->data(etarget, d); + emit->align(etarget, sizeof(cell_t)); + + free(buf); + } + } + + for_each_child(node, child) + emit_local_fixups(tree, emit, etarget, strbuf, vi, child); + + if (node->emit_local_fixup_node && node != tree) + emit->endnode(etarget, tree->labels); +} + +static void emit_symbols_node(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, + struct version_info *vi) +{ + struct symbol *sym; + int nameoff, vallen; + + /* do nothing if no symbols */ + if (!tree->symbols) + return; + + emit->beginnode(etarget, NULL); + emit->string(etarget, "__symbols__", 0); + emit->align(etarget, sizeof(cell_t)); + + for_each_symbol(tree, sym) { + + vallen = strlen(sym->node->fullpath); + + nameoff = stringtable_insert(strbuf, sym->label->label); + + emit->property(etarget, NULL); + emit->cell(etarget, vallen + 1); + emit->cell(etarget, nameoff); + + if ((vi->flags & FTF_VARALIGN) && vallen >= 8) + emit->align(etarget, 8); + + emit->string(etarget, sym->node->fullpath, + strlen(sym->node->fullpath)); + emit->align(etarget, sizeof(cell_t)); + } + + emit->endnode(etarget, NULL); +} + +static void emit_local_fixups_node(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, + struct version_info *vi) +{ + struct fixup_entry *fe; + struct node *node; + + /* do nothing if no local fixups */ + if (!tree->local_fixups) + return; + + /* mark all nodes that need a local fixup generated (and parents) */ + for_each_local_fixup_entry(tree, fe) { + node = fe->node; + while (node != NULL && !node->emit_local_fixup_node) { + node->emit_local_fixup_node = true; + node = node->parent; + } + } + + /* emit the local fixups node now */ + emit->beginnode(etarget, NULL); + emit->string(etarget, "__local_fixups__", 0); + emit->align(etarget, sizeof(cell_t)); + + emit_local_fixups(tree, emit, etarget, strbuf, vi, tree); + + emit->endnode(etarget, tree->labels); +} + +static void emit_fixups_node(struct node *tree, struct emitter *emit, + void *etarget, struct data *strbuf, + struct version_info *vi) +{ + struct fixup *f; + struct fixup_entry *fe; + char *name, *s; + const char *fullpath; + int namesz, nameoff, vallen; + + /* do nothing if no fixups */ + if (!tree->fixups) + return; + + /* emit the external fixups */ + emit->beginnode(etarget, NULL); + emit->string(etarget, "__fixups__", 0); + emit->align(etarget, sizeof(cell_t)); + + for_each_fixup(tree, f) { + + namesz = 0; + for_each_fixup_entry(f, fe) { + fullpath = fe->node->fullpath; + if (fullpath[0] == '\0') + fullpath = "/"; + namesz += strlen(fullpath) + 1; + namesz += strlen(fe->prop->name) + 1; + namesz += 32; /* space for : + '\0' */ + } + + name = xmalloc(namesz); + + s = name; + for_each_fixup_entry(f, fe) { + fullpath = fe->node->fullpath; + if (fullpath[0] == '\0') + fullpath = "/"; + snprintf(s, name + namesz - s, "%s:%s:%d", fullpath, + fe->prop->name, fe->offset); + s += strlen(s) + 1; + } + + nameoff = stringtable_insert(strbuf, f->ref); + vallen = s - name - 1; + + emit->property(etarget, NULL); + emit->cell(etarget, vallen + 1); + emit->cell(etarget, nameoff); + + if ((vi->flags & FTF_VARALIGN) && vallen >= 8) + emit->align(etarget, 8); + + emit->string(etarget, name, vallen); + emit->align(etarget, sizeof(cell_t)); + + free(name); + } + + emit->endnode(etarget, tree->labels); +} + static void flatten_tree(struct node *tree, struct emitter *emit, void *etarget, struct data *strbuf, struct version_info *vi) { struct property *prop; struct node *child; - int seen_name_prop = 0; + bool seen_name_prop = false; if (tree->deleted) return; @@ -279,7 +477,7 @@ static void flatten_tree(struct node *tree, struct emitter *emit, int nameoff; if (streq(prop->name, "name")) - seen_name_prop = 1; + seen_name_prop = true; nameoff = stringtable_insert(strbuf, prop->name); @@ -310,6 +508,10 @@ static void flatten_tree(struct node *tree, struct emitter *emit, flatten_tree(child, emit, etarget, strbuf, vi); } + emit_symbols_node(tree, emit, etarget, strbuf, vi); + emit_local_fixups_node(tree, emit, etarget, strbuf, vi); + emit_fixups_node(tree, emit, etarget, strbuf, vi); + emit->endnode(etarget, tree->labels); } diff --git a/scripts/dtc/fstree.c b/scripts/dtc/fstree.c index e464727c8808c..6e5878a05dfad 100644 --- a/scripts/dtc/fstree.c +++ b/scripts/dtc/fstree.c @@ -37,26 +37,26 @@ static struct node *read_fstree(const char *dirname) tree = build_node(NULL, NULL); while ((de = readdir(d)) != NULL) { - char *tmpnam; + char *tmpname; if (streq(de->d_name, ".") || streq(de->d_name, "..")) continue; - tmpnam = join_path(dirname, de->d_name); + tmpname = join_path(dirname, de->d_name); - if (lstat(tmpnam, &st) < 0) - die("stat(%s): %s\n", tmpnam, strerror(errno)); + if (lstat(tmpname, &st) < 0) + die("stat(%s): %s\n", tmpname, strerror(errno)); if (S_ISREG(st.st_mode)) { struct property *prop; FILE *pfile; - pfile = fopen(tmpnam, "r"); + pfile = fopen(tmpname, "rb"); if (! pfile) { fprintf(stderr, "WARNING: Cannot open %s: %s\n", - tmpnam, strerror(errno)); + tmpname, strerror(errno)); } else { prop = build_property(xstrdup(de->d_name), data_copy_file(pfile, @@ -67,12 +67,12 @@ static struct node *read_fstree(const char *dirname) } else if (S_ISDIR(st.st_mode)) { struct node *newchild; - newchild = read_fstree(tmpnam); + newchild = read_fstree(tmpname); newchild = name_node(newchild, xstrdup(de->d_name)); add_child(tree, newchild); } - free(tmpnam); + free(tmpname); } closedir(d); diff --git a/scripts/dtc/livetree.c b/scripts/dtc/livetree.c index b61465fb2f338..e229b84432f99 100644 --- a/scripts/dtc/livetree.c +++ b/scripts/dtc/livetree.c @@ -511,7 +511,9 @@ struct node *get_node_by_phandle(struct node *tree, cell_t phandle) struct node *get_node_by_ref(struct node *tree, const char *ref) { - if (ref[0] == '/') + if (streq(ref, "/")) + return tree; + else if (ref[0] == '/') return get_node_by_path(tree, ref); else return get_node_by_label(tree, ref); diff --git a/scripts/dtc/srcpos.c b/scripts/dtc/srcpos.c index c20bc5315bc1b..f534c22a888d7 100644 --- a/scripts/dtc/srcpos.c +++ b/scripts/dtc/srcpos.c @@ -34,7 +34,7 @@ struct search_path { static struct search_path *search_path_head, **search_path_tail; -static char *dirname(const char *path) +static char *get_dirname(const char *path) { const char *slash = strrchr(path, '/'); @@ -77,7 +77,7 @@ static char *try_open(const char *dirname, const char *fname, FILE **fp) else fullname = join_path(dirname, fname); - *fp = fopen(fullname, "r"); + *fp = fopen(fullname, "rb"); if (!*fp) { free(fullname); fullname = NULL; @@ -150,7 +150,7 @@ void srcfile_push(const char *fname) srcfile = xmalloc(sizeof(*srcfile)); srcfile->f = srcfile_relative_open(fname, &srcfile->name); - srcfile->dir = dirname(srcfile->name); + srcfile->dir = get_dirname(srcfile->name); srcfile->prev = current_srcfile; srcfile->lineno = 1; @@ -159,7 +159,7 @@ void srcfile_push(const char *fname) current_srcfile = srcfile; } -int srcfile_pop(void) +bool srcfile_pop(void) { struct srcfile_state *srcfile = current_srcfile; @@ -177,7 +177,7 @@ int srcfile_pop(void) * fix this we could either allocate all the files from a * table, or use a pool allocator. */ - return current_srcfile ? 1 : 0; + return current_srcfile ? true : false; } void srcfile_add_search_path(const char *dirname) @@ -290,42 +290,27 @@ srcpos_string(struct srcpos *pos) return pos_str; } -void -srcpos_verror(struct srcpos *pos, char const *fmt, va_list va) +void srcpos_verror(struct srcpos *pos, const char *prefix, + const char *fmt, va_list va) { - const char *srcstr; - - srcstr = srcpos_string(pos); + char *srcstr; - fprintf(stderr, "Error: %s ", srcstr); - vfprintf(stderr, fmt, va); - fprintf(stderr, "\n"); -} + srcstr = srcpos_string(pos); -void -srcpos_error(struct srcpos *pos, char const *fmt, ...) -{ - va_list va; + fprintf(stderr, "%s: %s ", prefix, srcstr); + vfprintf(stderr, fmt, va); + fprintf(stderr, "\n"); - va_start(va, fmt); - srcpos_verror(pos, fmt, va); - va_end(va); + free(srcstr); } - -void -srcpos_warn(struct srcpos *pos, char const *fmt, ...) +void srcpos_error(struct srcpos *pos, const char *prefix, + const char *fmt, ...) { - const char *srcstr; va_list va; - va_start(va, fmt); - - srcstr = srcpos_string(pos); - - fprintf(stderr, "Warning: %s ", srcstr); - vfprintf(stderr, fmt, va); - fprintf(stderr, "\n"); + va_start(va, fmt); + srcpos_verror(pos, prefix, fmt, va); va_end(va); } diff --git a/scripts/dtc/srcpos.h b/scripts/dtc/srcpos.h index 93a27123c2e9c..f81827bd684a7 100644 --- a/scripts/dtc/srcpos.h +++ b/scripts/dtc/srcpos.h @@ -21,6 +21,7 @@ #define _SRCPOS_H_ #include +#include struct srcfile_state { FILE *f; @@ -55,7 +56,7 @@ extern struct srcfile_state *current_srcfile; /* = NULL */ FILE *srcfile_relative_open(const char *fname, char **fullnamep); void srcfile_push(const char *fname); -int srcfile_pop(void); +bool srcfile_pop(void); /** * Add a new directory to the search path for input files @@ -106,12 +107,12 @@ extern struct srcpos *srcpos_copy(struct srcpos *pos); extern char *srcpos_string(struct srcpos *pos); extern void srcpos_dump(struct srcpos *pos); -extern void srcpos_verror(struct srcpos *pos, char const *, va_list va) - __attribute__((format(printf, 2, 0))); -extern void srcpos_error(struct srcpos *pos, char const *, ...) - __attribute__((format(printf, 2, 3))); -extern void srcpos_warn(struct srcpos *pos, char const *, ...) - __attribute__((format(printf, 2, 3))); +extern void srcpos_verror(struct srcpos *pos, const char *prefix, + const char *fmt, va_list va) + __attribute__((format(printf, 3, 0))); +extern void srcpos_error(struct srcpos *pos, const char *prefix, + const char *fmt, ...) + __attribute__((format(printf, 3, 4))); extern void srcpos_set_line(char *f, int l); diff --git a/scripts/dtc/treesource.c b/scripts/dtc/treesource.c index 5740e6992d37c..a146f2d332562 100644 --- a/scripts/dtc/treesource.c +++ b/scripts/dtc/treesource.c @@ -26,12 +26,12 @@ extern int yyparse(void); extern YYLTYPE yylloc; struct boot_info *the_boot_info; -int treesource_error; +bool treesource_error; struct boot_info *dt_from_source(const char *fname) { the_boot_info = NULL; - treesource_error = 0; + treesource_error = false; srcfile_push(fname); yyin = current_srcfile->f; @@ -54,9 +54,9 @@ static void write_prefix(FILE *f, int level) fputc('\t', f); } -static int isstring(char c) +static bool isstring(char c) { - return (isprint(c) + return (isprint((unsigned char)c) || (c == '\0') || strchr("\a\b\t\n\v\f\r", c)); } @@ -109,7 +109,7 @@ static void write_propval_string(FILE *f, struct data val) break; case '\0': fprintf(f, "\", "); - while (m && (m->offset < i)) { + while (m && (m->offset <= (i + 1))) { if (m->type == LABEL) { assert(m->offset == (i+1)); fprintf(f, "%s: ", m->ref); @@ -119,7 +119,7 @@ static void write_propval_string(FILE *f, struct data val) fprintf(f, "\""); break; default: - if (isprint(c)) + if (isprint((unsigned char)c)) fprintf(f, "%c", c); else fprintf(f, "\\x%02hhx", c); @@ -178,7 +178,7 @@ static void write_propval_bytes(FILE *f, struct data val) m = m->next; } - fprintf(f, "%02hhx", *bp++); + fprintf(f, "%02hhx", (unsigned char)(*bp++)); if ((const void *)bp >= propend) break; fprintf(f, " "); diff --git a/scripts/dtc/util.c b/scripts/dtc/util.c index 3055c16e980dc..9d65226df9e40 100644 --- a/scripts/dtc/util.c +++ b/scripts/dtc/util.c @@ -39,11 +39,11 @@ char *xstrdup(const char *s) { int len = strlen(s) + 1; - char *dup = xmalloc(len); + char *d = xmalloc(len); - memcpy(dup, s, len); + memcpy(d, s, len); - return dup; + return d; } char *join_path(const char *path, const char *name) @@ -70,7 +70,7 @@ char *join_path(const char *path, const char *name) return str; } -int util_is_printable_string(const void *data, int len) +bool util_is_printable_string(const void *data, int len) { const char *s = data; const char *ss, *se; @@ -87,7 +87,7 @@ int util_is_printable_string(const void *data, int len) while (s < se) { ss = s; - while (s < se && *s && isprint(*s)) + while (s < se && *s && isprint((unsigned char)*s)) s++; /* not zero, or not done yet */ @@ -219,10 +219,6 @@ int utilfdt_read_err_len(const char *filename, char **buffp, off_t *len) if (offset == bufsize) { bufsize *= 2; buf = xrealloc(buf, bufsize); - if (!buf) { - ret = ENOMEM; - break; - } } ret = read(fd, &buf[offset], bufsize - offset); @@ -375,9 +371,9 @@ void utilfdt_print_data(const char *data, int len) const uint32_t *cell = (const uint32_t *)data; printf(" = <"); - for (i = 0; i < len; i += 4) + for (i = 0, len /= 4; i < len; i++) printf("0x%08x%s", fdt32_to_cpu(cell[i]), - i < (len - 4) ? " " : ""); + i < (len - 1) ? " " : ""); printf(">"); } else { printf(" = ["); diff --git a/scripts/dtc/util.h b/scripts/dtc/util.h index 8f40b4499359d..f800b6011fb14 100644 --- a/scripts/dtc/util.h +++ b/scripts/dtc/util.h @@ -2,6 +2,7 @@ #define _UTIL_H #include +#include #include /* @@ -33,6 +34,7 @@ static inline void __attribute__((noreturn)) die(const char *str, ...) va_start(ap, str); fprintf(stderr, "FATAL ERROR: "); vfprintf(stderr, str, ap); + va_end(ap); exit(1); } @@ -68,7 +70,7 @@ extern char *join_path(const char *path, const char *name); * @param len The string length including terminator * @return 1 if a valid printable string, 0 if not */ -int util_is_printable_string(const void *data, int len); +bool util_is_printable_string(const void *data, int len); /* * Parse an escaped character starting at index i in string s. The resulting diff --git a/scripts/dtc/version_gen.h b/scripts/dtc/version_gen.h index 54d4e904433a3..821a9ce5ee357 100644 --- a/scripts/dtc/version_gen.h +++ b/scripts/dtc/version_gen.h @@ -1 +1 @@ -#define DTC_VERSION "DTC 1.4.0-dirty" +#define DTC_VERSION "DTC 1.4.1-g939ba00e" diff --git a/scripts/package/builddeb b/scripts/package/builddeb index 88dbf23b69708..9678058a978ef 100755 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -45,7 +45,7 @@ create_package() { arm64) debarch=arm64 ;; arm*) - debarch=arm$(grep -q CONFIG_AEABI=y $KCONFIG_CONFIG && echo el || true) ;; + debarch=arm$(grep -q CONFIG_AEABI=y $KCONFIG_CONFIG && echo hf || true) ;; *) echo "" >&2 echo "** ** ** WARNING ** ** **" >&2 @@ -165,6 +165,16 @@ if grep -q '^CONFIG_MODULES=y' $KCONFIG_CONFIG ; then fi fi +if grep -q '^CONFIG_OF=y' $KCONFIG_CONFIG ; then + mkdir -p "$tmpdir/boot/dtbs/$version" + INSTALL_DTBS_PATH="$tmpdir/boot/dtbs/$version" $MAKE KBUILD_SRC= dtbs_install + + #make dtbs_install seems to add an .old directory + if [ -d "$tmpdir/boot/dtbs/$version.old" ] ; then + rm -rf "$tmpdir/boot/dtbs/$version.old" + fi +fi + if [ "$ARCH" != "um" ]; then $MAKE headers_check KBUILD_SRC= $MAKE headers_install KBUILD_SRC= INSTALL_HDR_PATH="$libc_headers_dir/usr"