Standing pull request from jadonk #4
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
(split into pinmux and cape patches rcn-ee) Signed-off-by: John Syn <[email protected]> Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Rewritten using includes, v3.16.1 Signed-off-by: Dave Lambert <[email protected]> Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
#git://git.ti.com/ti-cm3-pm-firmware/amx3-cm3.git #fb0117edd5810a8d3bd9b1cd8abe34e12ff2d0ba Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Robert Nelson <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Dec 17, 2021
[ Upstream commit 8f96a5b ] We update the ctime/mtime of a block device when we remove it so that blkid knows the device changed. However we do this by re-opening the block device and calling filp_update_time. This is more correct because it'll call the inode->i_op->update_time if it exists, but the block dev inodes do not do this. Instead call generic_update_time() on the bd_inode in order to avoid the blkdev_open path and get rid of the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc2+ #406 Not tainted ------------------------------------------------------ losetup/11596 is trying to acquire lock: ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0 but task is already holding lock: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x25/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 do_sys_openat2+0x7b/0x130 __x64_sys_openat+0x46/0x70 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0x7d/0x750 blkdev_get_by_dev.part.0+0x56/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x161/0x390 path_openat+0x3cc/0xa20 do_filp_open+0x96/0x120 file_open_name+0xc7/0x170 filp_open+0x2c/0x50 btrfs_scratch_superblocks.part.0+0x10f/0x170 btrfs_rm_device.cold+0xe8/0xed btrfs_ioctl+0x2a31/0x2e70 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#12){.+.+}-{0:0}: lo_write_bvec+0xc2/0x240 [loop] loop_process_work+0x238/0xd00 [loop] process_one_work+0x26b/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x245/0x560 worker_thread+0x55/0x3c0 kthread+0x140/0x160 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 flush_workqueue+0x91/0x5e0 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/11596: #0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop] stack backtrace: CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ #406 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0xcf/0xf0 ? stack_trace_save+0x3b/0x50 __lock_acquire+0x10ea/0x1d90 lock_acquire+0xb5/0x2b0 ? flush_workqueue+0x67/0x5e0 ? lockdep_init_map_type+0x47/0x220 flush_workqueue+0x91/0x5e0 ? flush_workqueue+0x67/0x5e0 ? verify_cpu+0xf0/0x100 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x660 [loop] ? blkdev_ioctl+0x8d/0x2a0 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Dec 17, 2021
[ Upstream commit 8ef9dc0 ] We got the following lockdep splat while running fstests (specifically btrfs/003 and btrfs/020 in a row) with the new rc. This was uncovered by 87579e9 ("loop: use worker per cgroup instead of kworker") which converted loop to using workqueues, which comes with lockdep annotations that don't exist with kworkers. The lockdep splat is as follows: WARNING: possible circular locking dependency detected 5.14.0-rc2-custom+ #34 Not tainted ------------------------------------------------------ losetup/156417 is trying to acquire lock: ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600 but task is already holding lock: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x28/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x163/0x3a0 path_openat+0x74d/0xa40 do_filp_open+0x9c/0x140 do_sys_openat2+0xb1/0x170 __x64_sys_openat+0x54/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 blkdev_get_by_dev.part.0+0xd1/0x3c0 blkdev_get_by_path+0xc0/0xd0 btrfs_scan_one_device+0x52/0x1f0 [btrfs] btrfs_control_ioctl+0xac/0x170 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (uuid_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 btrfs_rm_device+0x48/0x6a0 [btrfs] btrfs_ioctl+0x2d1c/0x3110 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#11){.+.+}-{0:0}: lo_write_bvec+0x112/0x290 [loop] loop_process_work+0x25f/0xcb0 [loop] process_one_work+0x28f/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x266/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 flush_workqueue+0xae/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/156417: #0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] stack backtrace: CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ #34 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0x10a/0x120 __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 ? flush_workqueue+0x84/0x600 flush_workqueue+0xae/0x600 ? flush_workqueue+0x84/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] ? __lock_acquire+0x3a0/0x1dc0 ? update_dl_rq_load_avg+0x152/0x360 ? lock_is_held_type+0xa5/0x120 ? find_held_lock.constprop.0+0x2b/0x80 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f645884de6b Usually the uuid_mutex exists to protect the fs_devices that map together all of the devices that match a specific uuid. In rm_device we're messing with the uuid of a device, so it makes sense to protect that here. However in doing that it pulls in a whole host of lockdep dependencies, as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus we end up with the dependency chain under the uuid_mutex being added under the normal sb write dependency chain, which causes problems with loop devices. We don't need the uuid mutex here however. If we call btrfs_scan_one_device() before we scratch the super block we will find the fs_devices and not find the device itself and return EBUSY because the fs_devices is open. If we call it after the scratch happens it will not appear to be a valid btrfs file system. We do not need to worry about other fs_devices modifying operations here because we're protected by the exclusive operations locking. So drop the uuid_mutex here in order to fix the lockdep splat. A more detailed explanation from the discussion: We are worried about rm and scan racing with each other, before this change we'll zero the device out under the UUID mutex so when scan does run it'll make sure that it can go through the whole device scan thing without rm messing with us. We aren't worried if the scratch happens first, because the result is we don't think this is a btrfs device and we bail out. The only case we are concerned with is we scratch _after_ scan is able to read the superblock and gets a seemingly valid super block, so lets consider this case. Scan will call device_list_add() with the device we're removing. We'll call find_fsid_with_metadata_uuid() and get our fs_devices for this UUID. At this point we lock the fs_devices->device_list_mutex. This is what protects us in this case, but we have two cases here. 1. We aren't to the device removal part of the RM. We found our device, and device name matches our path, we go down and we set total_devices to our super number of devices, which doesn't affect anything because we haven't done the remove yet. 2. We are past the device removal part, which is protected by the device_list_mutex. Scan doesn't find the device, it goes down and does the if (fs_devices->opened) return -EBUSY; check and we bail out. Nothing about this situation is ideal, but the lockdep splat is real, and the fix is safe, tho admittedly a bit scary looking. Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> [ copy more from the discussion ] Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Dec 17, 2021
[ Upstream commit f0caea8 ] Olga reports seeing the following Oops when doing O_DIRECT writes to a pNFS flexfiles server: Oops: 0000 [#1] SMP PTI CPU: 1 PID: 234186 Comm: kworker/u8:1 Not tainted 5.15.0-rc4+ #4 Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014 Workqueue: nfsiod rpc_async_release [sunrpc] RIP: 0010:nfs_mark_request_commit+0x12/0x30 [nfs] Code: ff ff be 03 00 00 00 e8 ac 34 83 eb e9 29 ff ff ff e8 22 bc d7 eb 66 90 0f 1f 44 00 00 48 85 f6 74 16 48 8b 42 10 48 8b 40 18 <48> 8b 40 18 48 85 c0 74 05 e9 70 fc 15 ec 48 89 d6 e9 68 ed ff ff RSP: 0018:ffffa82f0159fe00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8f3393141880 RCX: 0000000000000000 RDX: ffffa82f0159fe08 RSI: ffff8f3381252500 RDI: ffff8f3393141880 RBP: ffff8f33ac317c00 R08: 0000000000000000 R09: ffff8f3487724cb0 R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000001 R13: ffff8f3485bccee0 R14: ffff8f33ac317c10 R15: ffff8f33ac317cd8 FS: 0000000000000000(0000) GS:ffff8f34fbc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000122120006 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: nfs_direct_write_completion+0x13b/0x250 [nfs] rpc_free_task+0x39/0x60 [sunrpc] rpc_async_release+0x29/0x40 [sunrpc] process_one_work+0x1ce/0x370 worker_thread+0x30/0x380 ? process_one_work+0x370/0x370 kthread+0x11a/0x140 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 Reported-by: Olga Kornievskaia <[email protected]> Fixes: 9c455a8 ("NFS/pNFS: Clean up pNFS commit operations") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Jan 12, 2022
commit f35838a upstream. Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(), but when the function returns in line 1184 (#4) victim_name allocated by line 1169 (#3) is not freed, which will lead to a memory leak. There is a similar snippet of code in this function as allocating a memory chunk for victim_name in line 1104 (#1) as well as releasing the memory in line 1116 (#2). We should kfree() victim_name when the return value of backref_in_log() is less than zero and before the function returns in line 1184 (#4). 1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans, 1058 struct btrfs_root *root, 1059 struct btrfs_path *path, 1060 struct btrfs_root *log_root, 1061 struct btrfs_inode *dir, 1062 struct btrfs_inode *inode, 1063 u64 inode_objectid, u64 parent_objectid, 1064 u64 ref_index, char *name, int namelen, 1065 int *search_done) 1066 { 1104 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #1: kmalloc (victim_name-1) 1105 if (!victim_name) 1106 return -ENOMEM; 1112 ret = backref_in_log(log_root, &search_key, 1113 parent_objectid, victim_name, 1114 victim_name_len); 1115 if (ret < 0) { 1116 kfree(victim_name); // #2: kfree (victim_name-1) 1117 return ret; 1118 } else if (!ret) { 1169 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #3: kmalloc (victim_name-2) 1170 if (!victim_name) 1171 return -ENOMEM; 1180 ret = backref_in_log(log_root, &search_key, 1181 parent_objectid, victim_name, 1182 victim_name_len); 1183 if (ret < 0) { 1184 return ret; // #4: missing kfree (victim_name-2) 1185 } else if (!ret) { 1241 return 0; 1242 } Fixes: d3316c8 ("btrfs: Properly handle backref_in_log retval") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Jianglei Nie <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Feb 10, 2022
icss_iep_perout_enable_hw() is invoked with spin_lock_irqsave() and
hence cannot use sleeping lock. Enable regmap fast_io for
iep_regmap_config so that it will use spinlock instead of mutex.
This fixes the following dump
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:947
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1103, name: sh
5 locks held by sh/1103:
#0: ffff00002b814438 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x6c/0xf8
#1: ffff0000322ae888 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf0/0x1b8
#2: ffff0000744837d0 (kn->active#158){++++}-{0:0}, at: kernfs_fop_write_iter+0xf8/0x1b8
#3: ffff0000344401b8 (&iep->ptp_clk_mutex){+.+.}-{3:3}, at: icss_iep_ptp_enable+0x168/0x2f0 [icss_iep]
#4: ffff0000344401f8 (&iep->irq_lock){....}-{2:2}, at: icss_iep_ptp_enable+0x19c/0x2f0 [icss_iep]
irq event stamp: 92858
hardirqs last enabled at (92857): [<ffff800010cbefa0>] _raw_spin_unlock_irqrestore+0x80/0x98
hardirqs last disabled at (92858): [<ffff800010cbf660>] _raw_spin_lock_irqsave+0xb0/0x144
softirqs last enabled at (92658): [<ffff80001001062c>] efi_header_end+0x62c/0x6b0
softirqs last disabled at (92645): [<ffff80001005993c>] irq_exit+0x1c4/0x1d8
Preemption disabled at:
[<ffff800009491484>] icss_iep_ptp_enable+0x19c/0x2f0 [icss_iep]
CPU: 1 PID: 1103 Comm: sh Not tainted 5.10.65-08510-g2bea885230fd-dirty #204
Hardware name: Texas Instruments AM642 EVM (DT)
Call trace:
dump_backtrace+0x0/0x1d0
show_stack+0x18/0x28
dump_stack+0xec/0x154
___might_sleep+0x194/0x240
__might_sleep+0x50/0x88
__mutex_lock+0x5c/0x900
mutex_lock_nested+0x34/0x50
regmap_lock_mutex+0x14/0x20
regmap_write+0x3c/0x78
icss_iep_perout_enable_hw+0xd0/0x2c0 [icss_iep]
icss_iep_ptp_enable+0x2b4/0x2f0 [icss_iep]
pps_enable_store+0xc0/0xe0
dev_attr_store+0x18/0x30
sysfs_kf_write+0x4c/0x78
kernfs_fop_write_iter+0x120/0x1b8
new_sync_write+0xe8/0x188
vfs_write+0x2ac/0x450
ksys_write+0x6c/0xf8
__arm64_sys_write+0x1c/0x28
el0_svc_common.constprop.0+0x7c/0x1f0
do_el0_svc+0x24/0x90
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb8
el0_sync+0x180/0x1c0
=============================
[ BUG: Invalid wait context ]
5.10.65-08510-g2bea885230fd-dirty #204 Tainted: G W
-----------------------------
sh/1103 is trying to lock:
ffff000034440468 (icss_iep:959:(iep->plat_data->config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex+0x14/0x20
other info that might help us debug this:
context-{4:4}
5 locks held by sh/1103:
#0: ffff00002b814438 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x6c/0xf8
#1: ffff0000322ae888 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf0/0x1b8
#2: ffff0000744837d0 (kn->active#158){++++}-{0:0}, at: kernfs_fop_write_iter+0xf8/0x1b8
#3: ffff0000344401b8 (&iep->ptp_clk_mutex){+.+.}-{3:3}, at: icss_iep_ptp_enable+0x168/0x2f0 [icss_iep]
#4: ffff0000344401f8 (&iep->irq_lock){....}-{2:2}, at: icss_iep_ptp_enable+0x19c/0x2f0 [icss_iep]
stack backtrace:
CPU: 1 PID: 1103 Comm: sh Tainted: G W 5.10.65-08510-g2bea885230fd-dirty #204
Hardware name: Texas Instruments AM642 EVM (DT)
Call trace:
dump_backtrace+0x0/0x1d0
show_stack+0x18/0x28
dump_stack+0xec/0x154
__lock_acquire+0x1d38/0x1d60
lock_acquire+0x154/0x410
__mutex_lock+0x9c/0x900
mutex_lock_nested+0x34/0x50
regmap_lock_mutex+0x14/0x20
regmap_write+0x3c/0x78
icss_iep_perout_enable_hw+0xd0/0x2c0 [icss_iep]
icss_iep_ptp_enable+0x2b4/0x2f0 [icss_iep]
pps_enable_store+0xc0/0xe0
dev_attr_store+0x18/0x30
sysfs_kf_write+0x4c/0x78
kernfs_fop_write_iter+0x120/0x1b8
new_sync_write+0xe8/0x188
vfs_write+0x2ac/0x450
ksys_write+0x6c/0xf8
__arm64_sys_write+0x1c/0x28
el0_svc_common.constprop.0+0x7c/0x1f0
do_el0_svc+0x24/0x90
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb8
el0_sync+0x180/0x1c0
Fixes: 5d58df8 ("net: ethernet: ti: icss_iep: fix pps irq race vs pps disable")
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Feb 16, 2022
commit 232796d upstream. When enabling quotas, we attempt to commit a transaction while holding the mutex fs_info->qgroup_ioctl_lock. This can result on a deadlock with other quota operations such as: - qgroup creation and deletion, ioctl BTRFS_IOC_QGROUP_CREATE; - adding and removing qgroup relations, ioctl BTRFS_IOC_QGROUP_ASSIGN. This is because these operations join a transaction and after that they attempt to lock the mutex fs_info->qgroup_ioctl_lock. Acquiring that mutex after joining or starting a transaction is a pattern followed everywhere in qgroups, so the quota enablement operation is the one at fault here, and should not commit a transaction while holding that mutex. Fix this by making the transaction commit while not holding the mutex. We are safe from two concurrent tasks trying to enable quotas because we are serialized by the rw semaphore fs_info->subvol_sem at btrfs_ioctl_quota_ctl(), which is the only call site for enabling quotas. When this deadlock happens, it produces a trace like the following: INFO: task syz-executor:25604 blocked for more than 143 seconds. Not tainted 5.15.0-rc6 #4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:24800 pid:25604 ppid: 24873 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4940 [inline] __schedule+0xcd9/0x2530 kernel/sched/core.c:6287 schedule+0xd3/0x270 kernel/sched/core.c:6366 btrfs_commit_transaction+0x994/0x2e90 fs/btrfs/transaction.c:2201 btrfs_quota_enable+0x95c/0x1790 fs/btrfs/qgroup.c:1120 btrfs_ioctl_quota_ctl fs/btrfs/ioctl.c:4229 [inline] btrfs_ioctl+0x637e/0x7b70 fs/btrfs/ioctl.c:5010 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f86920b2c4d RSP: 002b:00007f868f61ac58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f86921d90a0 RCX: 00007f86920b2c4d RDX: 0000000020005e40 RSI: 00000000c0109428 RDI: 0000000000000008 RBP: 00007f869212bd80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86921d90a0 R13: 00007fff6d233e4f R14: 00007fff6d233ff0 R15: 00007f868f61adc0 INFO: task syz-executor:25628 blocked for more than 143 seconds. Not tainted 5.15.0-rc6 #4 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:29080 pid:25628 ppid: 24873 flags:0x00004004 Call Trace: context_switch kernel/sched/core.c:4940 [inline] __schedule+0xcd9/0x2530 kernel/sched/core.c:6287 schedule+0xd3/0x270 kernel/sched/core.c:6366 schedule_preempt_disabled+0xf/0x20 kernel/sched/core.c:6425 __mutex_lock_common kernel/locking/mutex.c:669 [inline] __mutex_lock+0xc96/0x1680 kernel/locking/mutex.c:729 btrfs_remove_qgroup+0xb7/0x7d0 fs/btrfs/qgroup.c:1548 btrfs_ioctl_qgroup_create fs/btrfs/ioctl.c:4333 [inline] btrfs_ioctl+0x683c/0x7b70 fs/btrfs/ioctl.c:5014 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Hao Sun <[email protected]> Link: https://lore.kernel.org/linux-btrfs/CACkBjsZQF19bQ1C6=yetF3BvL10OSORpFUcWXTP6HErshDB4dQ@mail.gmail.com/ Fixes: 340f1aa ("btrfs: qgroups: Move transaction management inside btrfs_quota_enable/disable") CC: [email protected] # 4.19 Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Mar 31, 2022
commit b7d6f44 upstream. Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. Reported-by: Rolf Eike Beer <[email protected]> Signed-off-by: John David Anglin <[email protected]> Cc: [email protected] Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Mar 31, 2022
[ Upstream commit 3d6cc98 ] When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] <IRQ> [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Shyam Prasad N <[email protected]> Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Jun 28, 2022
[ Upstream commit 841aee4 ] Put NVMe/TCP sockets in their own class to avoid some lockdep warnings. Sockets created by nvme-tcp are not exposed to user-space, and will not trigger certain code paths that the general socket API exposes. Lockdep complains about a circular dependency between the socket and filesystem locks, because setsockopt can trigger a page fault with a socket lock held, but nvme-tcp sends requests on the socket while file system locks are held. ====================================================== WARNING: possible circular locking dependency detected 5.15.0-rc3 #1 Not tainted ------------------------------------------------------ fio/1496 is trying to acquire lock: (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendpage+0x23/0x80 but task is already holding lock: (&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs] which lock already depends on the new lock. other info that might help us debug this: chain exists of: sk_lock-AF_INET --> sb_internal --> &xfs_dir_ilock_class/5 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xfs_dir_ilock_class/5); lock(sb_internal); lock(&xfs_dir_ilock_class/5); lock(sk_lock-AF_INET); *** DEADLOCK *** 6 locks held by fio/1496: #0: (sb_writers#13){.+.+}-{0:0}, at: path_openat+0x9fc/0xa20 #1: (&inode->i_sb->s_type->i_mutex_dir_key){++++}-{3:3}, at: path_openat+0x296/0xa20 #2: (sb_internal){.+.+}-{0:0}, at: xfs_trans_alloc_icreate+0x41/0xd0 [xfs] #3: (&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs] #4: (hctx->srcu){....}-{0:0}, at: hctx_lock+0x51/0xd0 #5: (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0x33e/0x380 [nvme_tcp] This annotation lets lockdep analyze nvme-tcp controlled sockets independently of what the user-space sockets API does. Link: https://lore.kernel.org/linux-nvme/CAHj4cs9MDYLJ+q+2_GXUK9HxFizv2pxUryUR0toX974M040z7g@mail.gmail.com/ Signed-off-by: Chris Leech <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Jun 28, 2022
commit a80ced6 upstream. As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b067 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. Co-developed-by: Yi Liu <[email protected]> Signed-off-by: Yi Liu <[email protected]> Signed-off-by: Yi Wang <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Jun 28, 2022
[ Upstream commit 447c799 ] Noticed the below warning while running a pytorch workload on vega10 GPUs. Change to trylock to avoid conflicts with already held reservation locks. [ +0.000003] WARNING: possible recursive locking detected [ +0.000003] 5.13.0-kfd-rajneesh #1030 Not tainted [ +0.000004] -------------------------------------------- [ +0.000002] python/4822 is trying to acquire lock: [ +0.000004] ffff932cd9a259f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000203] but task is already holding lock: [ +0.000003] ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000017] other info that might help us debug this: [ +0.000002] Possible unsafe locking scenario: [ +0.000003] CPU0 [ +0.000002] ---- [ +0.000002] lock(reservation_ww_class_mutex); [ +0.000004] lock(reservation_ww_class_mutex); [ +0.000003] *** DEADLOCK *** [ +0.000002] May be due to missing lock nesting notation [ +0.000003] 7 locks held by python/4822: [ +0.000003] #0: ffff932c4ac028d0 (&process->mutex){+.+.}-{3:3}, at: kfd_ioctl_map_memory_to_gpu+0x10b/0x320 [amdgpu] [ +0.000232] #1: ffff932c55e830a8 (&info->lock#2){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x64/0xf60 [amdgpu] [ +0.000241] #2: ffff932cc45b5e68 (&(*mem)->lock){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0xdf/0xf60 [amdgpu] [ +0.000236] #3: ffffb2b35606fd28 (reservation_ww_class_acquire){+.+.}-{0:0}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x232/0xf60 [amdgpu] [ +0.000235] #4: ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000015] #5: ffffffffc045f700 (*(sspp++)){....}-{0:0}, at: drm_dev_enter+0x5/0xa0 [drm] [ +0.000038] #6: ffff932c52da7078 (&vm->eviction_lock){+.+.}-{3:3}, at: amdgpu_vm_bo_update_mapping+0xd5/0x4f0 [amdgpu] [ +0.000195] stack backtrace: [ +0.000003] CPU: 11 PID: 4822 Comm: python Not tainted 5.13.0-kfd-rajneesh #1030 [ +0.000005] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F02 08/29/2018 [ +0.000003] Call Trace: [ +0.000003] dump_stack+0x6d/0x89 [ +0.000010] __lock_acquire+0xb93/0x1a90 [ +0.000009] lock_acquire+0x25d/0x2d0 [ +0.000005] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] __ww_mutex_lock.constprop.17+0xca/0x1060 [ +0.000007] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] ? lock_release+0x13f/0x270 [ +0.000005] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000185] ttm_bo_release+0x4c6/0x580 [ttm] [ +0.000010] amdgpu_bo_unref+0x1a/0x30 [amdgpu] [ +0.000183] amdgpu_vm_free_table+0x76/0xa0 [amdgpu] [ +0.000189] amdgpu_vm_free_pts+0xb8/0xf0 [amdgpu] [ +0.000189] amdgpu_vm_update_ptes+0x411/0x770 [amdgpu] [ +0.000191] amdgpu_vm_bo_update_mapping+0x324/0x4f0 [amdgpu] [ +0.000191] amdgpu_vm_bo_update+0x251/0x610 [amdgpu] [ +0.000191] update_gpuvm_pte+0xcc/0x290 [amdgpu] [ +0.000229] ? amdgpu_vm_bo_map+0xd7/0x130 [amdgpu] [ +0.000190] amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x912/0xf60 [amdgpu] [ +0.000234] kfd_ioctl_map_memory_to_gpu+0x182/0x320 [amdgpu] [ +0.000218] kfd_ioctl+0x2b9/0x600 [amdgpu] [ +0.000216] ? kfd_ioctl_unmap_memory_from_gpu+0x270/0x270 [amdgpu] [ +0.000216] ? lock_release+0x13f/0x270 [ +0.000006] ? __fget_files+0x107/0x1e0 [ +0.000007] __x64_sys_ioctl+0x8b/0xd0 [ +0.000007] do_syscall_64+0x36/0x70 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000007] RIP: 0033:0x7fbff90a7317 [ +0.000004] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48 [ +0.000005] RSP: 002b:00007fbe301fe648 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ +0.000006] RAX: ffffffffffffffda RBX: 00007fbcc402d820 RCX: 00007fbff90a7317 [ +0.000003] RDX: 00007fbe301fe690 RSI: 00000000c0184b18 RDI: 0000000000000004 [ +0.000003] RBP: 00007fbe301fe690 R08: 0000000000000000 R09: 00007fbcc402d880 [ +0.000003] R10: 0000000002001000 R11: 0000000000000246 R12: 00000000c0184b18 [ +0.000003] R13: 0000000000000004 R14: 00007fbf689593a0 R15: 00007fbcc402d820 Cc: Christian König <[email protected]> Cc: Felix Kuehling <[email protected]> Cc: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Rajneesh Bhardwaj <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Jun 28, 2022
[ Upstream commit af68656 ] While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34 ("bnx2x: AER revised") Reported-by: David Christensen <[email protected]> Tested-by: David Christensen <[email protected]> Signed-off-by: Manish Chopra <[email protected]> Signed-off-by: Ariel Elior <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Aug 26, 2022
[ Upstream commit 1b0e814 ] Commit 3e3b5df ("NFC: reorder the logic in nfc_{un,}register_device") assumes the device_is_registered() in function nfc_dev_up() will help to check when the rfkill is unregistered. However, this check only take effect when device_del(&dev->dev) is done in nfc_unregister_device(). Hence, the rfkill object is still possible be dereferenced. The crash trace in latest kernel (5.18-rc2): [ 68.760105] ================================================================== [ 68.760330] BUG: KASAN: use-after-free in __lock_acquire+0x3ec1/0x6750 [ 68.760756] Read of size 8 at addr ffff888009c93018 by task fuzz/313 [ 68.760756] [ 68.760756] CPU: 0 PID: 313 Comm: fuzz Not tainted 5.18.0-rc2 #4 [ 68.760756] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 68.760756] Call Trace: [ 68.760756] <TASK> [ 68.760756] dump_stack_lvl+0x57/0x7d [ 68.760756] print_report.cold+0x5e/0x5db [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] kasan_report+0xbe/0x1c0 [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] __lock_acquire+0x3ec1/0x6750 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? register_lock_class+0x18d0/0x18d0 [ 68.760756] lock_acquire+0x1ac/0x4f0 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? mutex_lock_io_nested+0x12c0/0x12c0 [ 68.760756] ? nla_get_range_signed+0x540/0x540 [ 68.760756] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 68.760756] _raw_spin_lock_irqsave+0x39/0x50 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] rfkill_blocked+0xe/0x60 [ 68.760756] nfc_dev_up+0x84/0x260 [ 68.760756] nfc_genl_dev_up+0x90/0xe0 [ 68.760756] genl_family_rcv_msg_doit+0x1f4/0x2f0 [ 68.760756] ? genl_family_rcv_msg_attrs_parse.constprop.0+0x230/0x230 [ 68.760756] ? security_capable+0x51/0x90 [ 68.760756] genl_rcv_msg+0x280/0x500 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? lock_acquire+0x1ac/0x4f0 [ 68.760756] ? nfc_genl_dev_down+0xe0/0xe0 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] netlink_rcv_skb+0x11b/0x340 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? netlink_ack+0x9c0/0x9c0 [ 68.760756] ? netlink_deliver_tap+0x136/0xb00 [ 68.760756] genl_rcv+0x1f/0x30 [ 68.760756] netlink_unicast+0x430/0x710 [ 68.760756] ? memset+0x20/0x40 [ 68.760756] ? netlink_attachskb+0x740/0x740 [ 68.760756] ? __build_skb_around+0x1f4/0x2a0 [ 68.760756] netlink_sendmsg+0x75d/0xc00 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] sock_sendmsg+0xdf/0x110 [ 68.760756] __sys_sendto+0x19e/0x270 [ 68.760756] ? __ia32_sys_getpeername+0xa0/0xa0 [ 68.760756] ? fd_install+0x178/0x4c0 [ 68.760756] ? fd_install+0x195/0x4c0 [ 68.760756] ? kernel_fpu_begin_mask+0x1c0/0x1c0 [ 68.760756] __x64_sys_sendto+0xd8/0x1b0 [ 68.760756] ? lockdep_hardirqs_on+0xbf/0x130 [ 68.760756] ? syscall_enter_from_user_mode+0x1d/0x50 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] RIP: 0033:0x7f67fb50e6b3 ... [ 68.760756] RSP: 002b:00007f67fa91fe90 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 68.760756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f67fb50e6b3 [ 68.760756] RDX: 000000000000001c RSI: 0000559354603090 RDI: 0000000000000003 [ 68.760756] RBP: 00007f67fa91ff00 R08: 00007f67fa91fedc R09: 000000000000000c [ 68.760756] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe824d496e [ 68.760756] R13: 00007ffe824d496f R14: 00007f67fa120000 R15: 0000000000000003 [ 68.760756] </TASK> [ 68.760756] [ 68.760756] Allocated by task 279: [ 68.760756] kasan_save_stack+0x1e/0x40 [ 68.760756] __kasan_kmalloc+0x81/0xa0 [ 68.760756] rfkill_alloc+0x7f/0x280 [ 68.760756] nfc_register_device+0xa3/0x1a0 [ 68.760756] nci_register_device+0x77a/0xad0 [ 68.760756] nfcmrvl_nci_register_dev+0x20b/0x2c0 [ 68.760756] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 68.760756] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 68.760756] tty_ioctl+0x764/0x1310 [ 68.760756] __x64_sys_ioctl+0x122/0x190 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] [ 68.760756] Freed by task 314: [ 68.760756] kasan_save_stack+0x1e/0x40 [ 68.760756] kasan_set_track+0x21/0x30 [ 68.760756] kasan_set_free_info+0x20/0x30 [ 68.760756] __kasan_slab_free+0x108/0x170 [ 68.760756] kfree+0xb0/0x330 [ 68.760756] device_release+0x96/0x200 [ 68.760756] kobject_put+0xf9/0x1d0 [ 68.760756] nfc_unregister_device+0x77/0x190 [ 68.760756] nfcmrvl_nci_unregister_dev+0x88/0xd0 [ 68.760756] nci_uart_tty_close+0xdf/0x180 [ 68.760756] tty_ldisc_kill+0x73/0x110 [ 68.760756] tty_ldisc_hangup+0x281/0x5b0 [ 68.760756] __tty_hangup.part.0+0x431/0x890 [ 68.760756] tty_release+0x3a8/0xc80 [ 68.760756] __fput+0x1f0/0x8c0 [ 68.760756] task_work_run+0xc9/0x170 [ 68.760756] exit_to_user_mode_prepare+0x194/0x1a0 [ 68.760756] syscall_exit_to_user_mode+0x19/0x50 [ 68.760756] do_syscall_64+0x48/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae This patch just add the null out of dev->rfkill to make sure such dereference cannot happen. This is safe since the device_lock() already protect the check/write from data race. Fixes: 3e3b5df ("NFC: reorder the logic in nfc_{un,}register_device") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Nov 5, 2022
[ Upstream commit 84a5358 ] The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <[email protected]> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853d ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
fhgwright
pushed a commit
to fhgwright/bb-linux
that referenced
this pull request
Dec 4, 2022
…tion commit 07fd5b6 upstream. Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: beagleboard#1> mkdir -p /sys/fs/cgroup/misc/a/b beagleboard#2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs beagleboard#3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & beagleboard#4> PID=$! beagleboard#5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks beagleboard#6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After beagleboard#3, let's say the whole process was in cset A, and that after beagleboard#4, the leader moves to cset B. Then, during beagleboard#6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Mukesh Ojha <[email protected]> Reported-by: shisiyuan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: https://www.spinics.net/lists/cgroups/msg33313.html Fixes: f817de9 ("cgroup: prepare migration path for unified hierarchy") Cc: [email protected] # v3.16+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
fhgwright
pushed a commit
to fhgwright/bb-linux
that referenced
this pull request
Dec 4, 2022
[ Upstream commit dc4d316 ] [BUG] If we have a btrfs image with dirty log, along with an unsupported RO compatible flag: log_root 30474240 ... compat_flags 0x0 compat_ro_flags 0x40000003 ( FREE_SPACE_TREE | FREE_SPACE_TREE_VALID | unknown flag: 0x40000000 ) Then even if we can only mount it RO, we will still cause metadata update for log replay: BTRFS info (device dm-1): flagging fs with big metadata feature BTRFS info (device dm-1): using free space tree BTRFS info (device dm-1): has skinny extents BTRFS info (device dm-1): start tree-log replay This is definitely against RO compact flag requirement. [CAUSE] RO compact flag only forces us to do RO mount, but we will still do log replay for plain RO mount. Thus this will result us to do log replay and update metadata. This can be very problematic for new RO compat flag, for example older kernel can not understand v2 cache, and if we allow metadata update on RO mount and invalidate/corrupt v2 cache. [FIX] Just reject the mount unless rescue=nologreplay is provided: BTRFS error (device dm-1): cannot replay dirty log with unsupport optional features (0x40000000), try rescue=nologreplay instead We don't want to set rescue=nologreply directly, as this would make the end user to read the old data, and cause confusion. Since the such case is really rare, we're mostly fine to just reject the mount with an error message, which also includes the proper workaround. CC: [email protected] beagleboard#4.9+ Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Dec 8, 2022
commit 29a5b8a upstream. When walking through an inode extents, the ext4_ext_binsearch_idx() function assumes that the extent header has been previously validated. However, there are no checks that verify that the number of entries (eh->eh_entries) is non-zero when depth is > 0. And this will lead to problems because the EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this: [ 135.245946] ------------[ cut here ]------------ [ 135.247579] kernel BUG at fs/ext4/extents.c:2258! [ 135.249045] invalid opcode: 0000 [#1] PREEMPT SMP [ 135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4 [ 135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0 [ 135.256475] Code: [ 135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246 [ 135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023 [ 135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c [ 135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c [ 135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024 [ 135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000 [ 135.272394] FS: 00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 [ 135.274510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0 [ 135.277952] Call Trace: [ 135.278635] <TASK> [ 135.279247] ? preempt_count_add+0x6d/0xa0 [ 135.280358] ? percpu_counter_add_batch+0x55/0xb0 [ 135.281612] ? _raw_read_unlock+0x18/0x30 [ 135.282704] ext4_map_blocks+0x294/0x5a0 [ 135.283745] ? xa_load+0x6f/0xa0 [ 135.284562] ext4_mpage_readpages+0x3d6/0x770 [ 135.285646] read_pages+0x67/0x1d0 [ 135.286492] ? folio_add_lru+0x51/0x80 [ 135.287441] page_cache_ra_unbounded+0x124/0x170 [ 135.288510] filemap_get_pages+0x23d/0x5a0 [ 135.289457] ? path_openat+0xa72/0xdd0 [ 135.290332] filemap_read+0xbf/0x300 [ 135.291158] ? _raw_spin_lock_irqsave+0x17/0x40 [ 135.292192] new_sync_read+0x103/0x170 [ 135.293014] vfs_read+0x15d/0x180 [ 135.293745] ksys_read+0xa1/0xe0 [ 135.294461] do_syscall_64+0x3c/0x80 [ 135.295284] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This patch simply adds an extra check in __ext4_ext_check(), verifying that eh_entries is not 0 when eh_depth is > 0. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215941 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216283 Cc: Baokun Li <[email protected]> Cc: [email protected] Signed-off-by: Luís Henriques <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Baokun Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Feb 4, 2023
[ Upstream commit 13be2ef ] As previously noted in commit 66e4f4a ("rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()"): <4>[ 254.192378] WARNING: inconsistent lock state <4>[ 254.192384] 5.12.0-rc1-CI-CI_DRM_9834+ #1 Not tainted <4>[ 254.192396] -------------------------------- <4>[ 254.192400] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. <4>[ 254.192409] rtcwake/5309 [HC0[0]:SC0[0]:HE1:SE1] takes: <4>[ 254.192429] ffffffff8263c5f8 (rtc_lock){?...}-{2:2}, at: cmos_interrupt+0x18/0x100 <4>[ 254.192481] {IN-HARDIRQ-W} state was registered at: <4>[ 254.192488] lock_acquire+0xd1/0x3d0 <4>[ 254.192504] _raw_spin_lock+0x2a/0x40 <4>[ 254.192519] cmos_interrupt+0x18/0x100 <4>[ 254.192536] rtc_handler+0x1f/0xc0 <4>[ 254.192553] acpi_ev_fixed_event_detect+0x109/0x13c <4>[ 254.192574] acpi_ev_sci_xrupt_handler+0xb/0x28 <4>[ 254.192596] acpi_irq+0x13/0x30 <4>[ 254.192620] __handle_irq_event_percpu+0x43/0x2c0 <4>[ 254.192641] handle_irq_event_percpu+0x2b/0x70 <4>[ 254.192661] handle_irq_event+0x2f/0x50 <4>[ 254.192680] handle_fasteoi_irq+0x9e/0x150 <4>[ 254.192693] __common_interrupt+0x76/0x140 <4>[ 254.192715] common_interrupt+0x96/0xc0 <4>[ 254.192732] asm_common_interrupt+0x1e/0x40 <4>[ 254.192750] _raw_spin_unlock_irqrestore+0x38/0x60 <4>[ 254.192767] resume_irqs+0xba/0xf0 <4>[ 254.192786] dpm_resume_noirq+0x245/0x3d0 <4>[ 254.192811] suspend_devices_and_enter+0x230/0xaa0 <4>[ 254.192835] pm_suspend.cold.8+0x301/0x34a <4>[ 254.192859] state_store+0x7b/0xe0 <4>[ 254.192879] kernfs_fop_write_iter+0x11d/0x1c0 <4>[ 254.192899] new_sync_write+0x11d/0x1b0 <4>[ 254.192916] vfs_write+0x265/0x390 <4>[ 254.192933] ksys_write+0x5a/0xd0 <4>[ 254.192949] do_syscall_64+0x33/0x80 <4>[ 254.192965] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 254.192986] irq event stamp: 43775 <4>[ 254.192994] hardirqs last enabled at (43775): [<ffffffff81c00c42>] asm_sysvec_apic_timer_interrupt+0x12/0x20 <4>[ 254.193023] hardirqs last disabled at (43774): [<ffffffff81aa691a>] sysvec_apic_timer_interrupt+0xa/0xb0 <4>[ 254.193049] softirqs last enabled at (42548): [<ffffffff81e00342>] __do_softirq+0x342/0x48e <4>[ 254.193074] softirqs last disabled at (42543): [<ffffffff810b45fd>] irq_exit_rcu+0xad/0xd0 <4>[ 254.193101] other info that might help us debug this: <4>[ 254.193107] Possible unsafe locking scenario: <4>[ 254.193112] CPU0 <4>[ 254.193117] ---- <4>[ 254.193121] lock(rtc_lock); <4>[ 254.193137] <Interrupt> <4>[ 254.193142] lock(rtc_lock); <4>[ 254.193156] *** DEADLOCK *** <4>[ 254.193161] 6 locks held by rtcwake/5309: <4>[ 254.193174] #0: ffff888104861430 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x5a/0xd0 <4>[ 254.193232] #1: ffff88810f823288 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xe7/0x1c0 <4>[ 254.193282] #2: ffff888100cef3c0 (kn->active#285 <7>[ 254.192706] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <4>[ 254.193307] ){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf0/0x1c0 <4>[ 254.193333] #3: ffffffff82649fa8 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend.cold.8+0xce/0x34a <4>[ 254.193387] #4: ffffffff827a2108 (acpi_scan_lock){+.+.}-{3:3}, at: acpi_suspend_begin+0x47/0x70 <4>[ 254.193433] #5: ffff8881019ea178 (&dev->mutex){....}-{3:3}, at: device_resume+0x68/0x1e0 <4>[ 254.193485] stack backtrace: <4>[ 254.193492] CPU: 1 PID: 5309 Comm: rtcwake Not tainted 5.12.0-rc1-CI-CI_DRM_9834+ #1 <4>[ 254.193514] Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019 <4>[ 254.193524] Call Trace: <4>[ 254.193536] dump_stack+0x7f/0xad <4>[ 254.193567] mark_lock.part.47+0x8ca/0xce0 <4>[ 254.193604] __lock_acquire+0x39b/0x2590 <4>[ 254.193626] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 <4>[ 254.193660] lock_acquire+0xd1/0x3d0 <4>[ 254.193677] ? cmos_interrupt+0x18/0x100 <4>[ 254.193716] _raw_spin_lock+0x2a/0x40 <4>[ 254.193735] ? cmos_interrupt+0x18/0x100 <4>[ 254.193758] cmos_interrupt+0x18/0x100 <4>[ 254.193785] cmos_resume+0x2ac/0x2d0 <4>[ 254.193813] ? acpi_pm_set_device_wakeup+0x1f/0x110 <4>[ 254.193842] ? pnp_bus_suspend+0x10/0x10 <4>[ 254.193864] pnp_bus_resume+0x5e/0x90 <4>[ 254.193885] dpm_run_callback+0x5f/0x240 <4>[ 254.193914] device_resume+0xb2/0x1e0 <4>[ 254.193942] ? pm_dev_err+0x25/0x25 <4>[ 254.193974] dpm_resume+0xea/0x3f0 <4>[ 254.194005] dpm_resume_end+0x8/0x10 <4>[ 254.194030] suspend_devices_and_enter+0x29b/0xaa0 <4>[ 254.194066] pm_suspend.cold.8+0x301/0x34a <4>[ 254.194094] state_store+0x7b/0xe0 <4>[ 254.194124] kernfs_fop_write_iter+0x11d/0x1c0 <4>[ 254.194151] new_sync_write+0x11d/0x1b0 <4>[ 254.194183] vfs_write+0x265/0x390 <4>[ 254.194207] ksys_write+0x5a/0xd0 <4>[ 254.194232] do_syscall_64+0x33/0x80 <4>[ 254.194251] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 254.194274] RIP: 0033:0x7f07d79691e7 <4>[ 254.194293] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 <4>[ 254.194312] RSP: 002b:00007ffd9cc2c768 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 <4>[ 254.194337] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f07d79691e7 <4>[ 254.194352] RDX: 0000000000000004 RSI: 0000556ebfc63590 RDI: 000000000000000b <4>[ 254.194366] RBP: 0000556ebfc63590 R08: 0000000000000000 R09: 0000000000000004 <4>[ 254.194379] R10: 0000556ebf0ec2a6 R11: 0000000000000246 R12: 0000000000000004 which breaks S3-resume on fi-kbl-soraka presumably as that's slow enough to trigger the alarm during the suspend. Fixes: 6950d04 ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") References: 66e4f4a ("rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()"): Signed-off-by: Chris Wilson <[email protected]> Cc: Xiaofei Tan <[email protected]> Cc: Alexandre Belloni <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Ville Syrjälä <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
nmenon
pushed a commit
to nmenon/nm-beagle-linux
that referenced
this pull request
May 22, 2023
[ Upstream commit 93c660c ] ASAN reports an use-after-free in btf_dump_name_dups: ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928 READ of size 2 at 0xffff927006db thread T0 #0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614) beagleboard#1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127 beagleboard#2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143 beagleboard#3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212 beagleboard#4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525 beagleboard#5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552 beagleboard#6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567 beagleboard#7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912 beagleboard#8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798 beagleboard#9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282 beagleboard#10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236 beagleboard#11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 beagleboard#12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 beagleboard#13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 beagleboard#14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 beagleboard#15 0xaaaab5d65990 (test_progs+0x185990) 0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0) freed by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) beagleboard#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 beagleboard#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 beagleboard#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 beagleboard#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 beagleboard#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 beagleboard#6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032 beagleboard#7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232 beagleboard#8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 beagleboard#9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 beagleboard#10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 beagleboard#11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 beagleboard#12 0xaaaab5d65990 (test_progs+0x185990) previously allocated by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) beagleboard#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 beagleboard#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 beagleboard#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 beagleboard#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 beagleboard#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 beagleboard#6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070 beagleboard#7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102 beagleboard#8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162 beagleboard#9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 beagleboard#10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 beagleboard#11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 beagleboard#12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 beagleboard#13 0xaaaab5d65990 (test_progs+0x185990) The reason is that the key stored in hash table name_map is a string address, and the string memory is allocated by realloc() function, when the memory is resized by realloc() later, the old memory may be freed, so the address stored in name_map references to a freed memory, causing use-after-free. Fix it by storing duplicated string address in name_map. Fixes: 919d2b1 ("libbpf: Allow modification of BTF and add btf__add_str API") Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
nmenon
pushed a commit
to nmenon/nm-beagle-linux
that referenced
this pull request
May 22, 2023
…g the sock [ Upstream commit 3cf7203 ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 beagleboard#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d beagleboard#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 beagleboard#3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b beagleboard#4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb beagleboard#5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 beagleboard#6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 beagleboard#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] beagleboard#8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 beagleboard#9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 beagleboard#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 beagleboard#11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 beagleboard#12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde beagleboard#13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b beagleboard#14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 beagleboard#15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a beagleboard#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 beagleboard#17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca beagleboard#18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <[email protected]> Suggested-by: Jakub Sitnicki <[email protected]> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
nmenon
pushed a commit
to nmenon/nm-beagle-linux
that referenced
this pull request
May 22, 2023
[ Upstream commit b18cba0 ] Commit 9130b8d ("SUNRPC: allow for upcalls for the same uid but different gss service") introduced `auth` argument to __gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL since it (and auth->service) was not (yet) determined. When multiple upcalls with the same uid and different service are ongoing, it could happen that __gss_find_upcall(), which returns the first match found in the pipe->in_downcall list, could not find the correct gss_msg corresponding to the downcall we are looking for. Moreover, it might return a msg which is not sent to rpc.gssd yet. We could see mount.nfs process hung in D state with multiple mount.nfs are executed in parallel. The call trace below is of CentOS 7.9 kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/ elrepo kernel-ml-6.0.7-1.el7. PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs" #0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f beagleboard#1 [ffff9203ca323580] schedule at ffffffffa3b88eb9 beagleboard#2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss] beagleboard#3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc [sunrpc] beagleboard#4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss] beagleboard#5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc] beagleboard#6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc] beagleboard#7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc] beagleboard#8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc] beagleboard#9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc] The scenario is like this. Let's say there are two upcalls for services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe. When rpc.gssd reads pipe to get the upcall msg corresponding to service B from pipe->pipe and then writes the response, in gss_pipe_downcall the msg corresponding to service A will be picked because only uid is used to find the msg and it is before the one for B in pipe->in_downcall. And the process waiting for the msg corresponding to service A will be woken up. Actual scheduing of that process might be after rpc.gssd processes the next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A). The process is scheduled to see gss_msg->ctx == NULL and gss_msg->msg.errno == 0, therefore it cannot break the loop in gss_create_upcall and is never woken up after that. This patch adds a simple check to ensure that a msg which is not sent to rpc.gssd yet is not chosen as the matching upcall upon receiving a downcall. Signed-off-by: minoura makoto <[email protected]> Signed-off-by: Hiroshi Shimamoto <[email protected]> Tested-by: Hiroshi Shimamoto <[email protected]> Cc: Trond Myklebust <[email protected]> Fixes: 9130b8d ("SUNRPC: allow for upcalls for same uid but different gss service") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
nmenon
pushed a commit
to nmenon/nm-beagle-linux
that referenced
this pull request
May 22, 2023
[ Upstream commit 6c4ca03 ] During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... beagleboard#5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 beagleboard#6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] beagleboard#7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... beagleboard#4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 beagleboard#5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] beagleboard#6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... beagleboard#4 [c000000037247bc0] rtnl_lock at c000000000c940d8 beagleboard#5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] beagleboard#6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 beagleboard#4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 beagleboard#5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] beagleboard#6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... beagleboard#4 [c000000006867a60] rtnl_lock at c000000000c940d8 beagleboard#5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] beagleboard#6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... beagleboard#3 [c000000036c1bb70] msleep at c000000000259e6c beagleboard#4 [c000000036c1bba0] napi_disable at c000000000c6b848 beagleboard#5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] beagleboard#6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf4 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Mar 4, 2024
[ Upstream commit 1469417 ] Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ #532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Mar 4, 2024
[ Upstream commit fc3a553 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <[email protected]> Signed-off-by: Xin Liu <[email protected]> Signed-off-by: Changye Wu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Mar 12, 2024
[ Upstream commit fc3a553 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <[email protected]> Signed-off-by: Xin Liu <[email protected]> Signed-off-by: Changye Wu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Jun 27, 2024
[ Upstream commit 65e8fbd ] There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is caused by the fact that the postsuspend and resume methods were not paired correctly; there were two consecutive calls to the origin_postsuspend function. The second call attempts to remove the "hash_list" entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it calls the preresume and resume methods of the table's targets. If a preresume method of some target fails, we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return errors. We can't return success, because then the "resume" and "postsuspend" methods would not be paired correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools, but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0 Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ? do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ? __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0 [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot] dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0 [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10 [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]--- Fixes: ffcc393 ("dm: enhance internal suspend and resume interface") Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Oct 30, 2024
Syzkaller reported a lockdep splat:
============================================
WARNING: possible recursive locking detected
6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Not tainted
--------------------------------------------
syz-executor364/5113 is trying to acquire lock:
ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
but task is already holding lock:
ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(k-slock-AF_INET);
lock(k-slock-AF_INET);
*** DEADLOCK ***
May be due to missing lock nesting notation
7 locks held by syz-executor364/5113:
#0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline]
#0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806
#1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline]
#1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727
#2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline]
#2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline]
#2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470
#3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline]
#3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline]
#3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228
#4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline]
#4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104
#5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline]
#5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline]
#5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232
#6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline]
#6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
stack backtrace:
CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
check_deadlock kernel/locking/lockdep.c:3061 [inline]
validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855
__lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:351 [inline]
sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328
mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279
subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874
tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853
tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267
ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6108
__napi_poll+0xcb/0x490 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6963
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
do_softirq+0x11b/0x1e0 kernel/softirq.c:455
</IRQ>
<TASK>
__local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline]
__dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450
dev_queue_xmit include/linux/netdevice.h:3105 [inline]
neigh_hh_output include/net/neighbour.h:526 [inline]
neigh_output include/net/neighbour.h:540 [inline]
ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535
__tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466
tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline]
tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729
tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934
sk_backlog_rcv include/net/sock.h:1111 [inline]
__release_sock+0x214/0x350 net/core/sock.c:3004
release_sock+0x61/0x1f0 net/core/sock.c:3558
mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733
mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x1a6/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2597
___sys_sendmsg net/socket.c:2651 [inline]
__sys_sendmmsg+0x3b2/0x740 net/socket.c:2737
__do_sys_sendmmsg net/socket.c:2766 [inline]
__se_sys_sendmmsg net/socket.c:2763 [inline]
__x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f04fb13a6b9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9
RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004
RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240
R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300
</TASK>
As noted by Cong Wang, the splat is false positive, but the code
path leading to the report is an unexpected one: a client is
attempting an MPC handshake towards the in-kernel listener created
by the in-kernel PM for a port based signal endpoint.
Such connection will be never accepted; many of them can make the
listener queue full and preventing the creation of MPJ subflow via
such listener - its intended role.
Explicitly detect this scenario at initial-syn time and drop the
incoming MPC request.
Fixes: 1729cf1 ("mptcp: create the listening socket for new port")
Cc: [email protected]
Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e
Cc: Cong Wang <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Matthieu Baerts (NGI0) <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Nov 5, 2024
Hou Tao says: ==================== The patch set fixes several issues in bits iterator. Patch #1 fixes the kmemleak problem of bits iterator. Patch #2~#3 fix the overflow problem of nr_bits. Patch #4 fixes the potential stack corruption when bits iterator is used on 32-bit host. Patch #5 adds more test cases for bits iterator. Please see the individual patches for more details. And comments are always welcome. --- v4: * patch #1: add ack from Yafang * patch #3: revert code-churn like changes: (1) compute nr_bytes and nr_bits before the check of nr_words. (2) use nr_bits == 64 to check for single u64, preventing build warning on 32-bit hosts. * patch #4: use "BITS_PER_LONG == 32" instead of "!defined(CONFIG_64BIT)" v3: https://lore.kernel.org/bpf/[email protected]/T/#t * split the bits-iterator related patches from "Misc fixes for bpf" patch set * patch #1: use "!nr_bits || bits >= nr_bits" to stop the iteration * patch #2: add a new helper for the overflow problem * patch #3: decrease the limitation from 512 to 511 and check whether nr_bytes is too large for bpf memory allocator explicitly * patch #5: add two more test cases for bit iterator v2: http://lore.kernel.org/bpf/[email protected] ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Nov 5, 2024
Petr Machata says: ==================== mlxsw: Fixes In this patchset: - Tx header should be pushed for each packet which is transmitted via Spectrum ASICs. Patch #1 adds a missing call to skb_cow_head() to make sure that there is both enough room to push the Tx header and that the SKB header is not cloned and can be modified. - Commit b5b60bb ("mlxsw: pci: Use page pool for Rx buffers allocation") converted mlxsw to use page pool for Rx buffers allocation. Sync for CPU and for device should be done for Rx pages. In patches #2 and #3, add the missing calls to sync pages for, respectively, CPU and the device. - Patch #4 then fixes a bug to IPv6 GRE forwarding offload. Patch #5 adds a generic forwarding test that fails with mlxsw ports prior to the fix. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
RobertCNelson
pushed a commit
that referenced
this pull request
Nov 18, 2024
When CONFIG_KASAN_SW_TAGS and CONFIG_KASAN_STACK are enabled, the object_is_on_stack() function may produce incorrect results due to the presence of tags in the obj pointer, while the stack pointer does not have tags. This discrepancy can lead to incorrect stack object detection and subsequently trigger warnings if CONFIG_DEBUG_OBJECTS is also enabled. Example of the warning: ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at lib/debugobjects.c:557 __debug_object_init+0x330/0x364 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5 #4 Hardware name: linux,dummy-virt (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __debug_object_init+0x330/0x364 lr : __debug_object_init+0x330/0x364 sp : ffff800082ea7b40 x29: ffff800082ea7b40 x28: 98ff0000c0164518 x27: 98ff0000c0164534 x26: ffff800082d93ec8 x25: 0000000000000001 x24: 1cff0000c00172a0 x23: 0000000000000000 x22: ffff800082d93ed0 x21: ffff800081a24418 x20: 3eff800082ea7bb0 x19: efff800000000000 x18: 0000000000000000 x17: 00000000000000ff x16: 0000000000000047 x15: 206b63617473206e x14: 0000000000000018 x13: ffff800082ea7780 x12: 0ffff800082ea78e x11: 0ffff800082ea790 x10: 0ffff800082ea79d x9 : 34d77febe173e800 x8 : 34d77febe173e800 x7 : 0000000000000001 x6 : 0000000000000001 x5 : feff800082ea74b8 x4 : ffff800082870a90 x3 : ffff80008018d3c4 x2 : 0000000000000001 x1 : ffff800082858810 x0 : 0000000000000050 Call trace: __debug_object_init+0x330/0x364 debug_object_init_on_stack+0x30/0x3c schedule_hrtimeout_range_clock+0xac/0x26c schedule_hrtimeout+0x1c/0x30 wait_task_inactive+0x1d4/0x25c kthread_bind_mask+0x28/0x98 init_rescuer+0x1e8/0x280 workqueue_init+0x1a0/0x3cc kernel_init_freeable+0x118/0x200 kernel_init+0x28/0x1f0 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated. ------------[ cut here ]------------ Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Qun-Wei Lin <[email protected]> Cc: Andrew Yang <[email protected]> Cc: AngeloGioacchino Del Regno <[email protected]> Cc: Casper Li <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chinwen Chang <[email protected]> Cc: Kent Overstreet <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: Pasha Tatashin <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Please don't pull this request. I'm using this to test the ability for http://builds.beagleboard.org to build pull requests.
cape-universal-00A0.dts: added
Imported from https://github.com/cdsteinkuehler/beaglebone-universal-io
Commit-id: 829efbf1594ab60f16dccce3e0bc86757f179683