Boot up issue with Beaglebone black. #92

ghost · 2016-06-02T16:09:07Z

I tried connecting an ethernet cable to my beaglebone, but for some reason I am not able to make SSH connection to it. I also tried connecting the LCD display , but on LCD all it shows is the linux logo at the boot up and then the screen remains blank forever.

So, I made use of FTDI cable to debug the possible issue with my beaglebone black with LCD screen attached to it as well, It shows following errors:

(1) bone-capemgr bone_capemgr.9: failed to load firmware 'BB-DCAN1-00A0.dtbo

(2) bone-capemgr bone_capemgr.9: slot #9: BB-UART1 conflict P9.24 (#3:BB-BONE-LCD4-01)

(3) bone-capemgr bone_capemgr.9: slot #9:Failed verification

(4) bone-capemgr bone_capemgr.9: slot #10: BB-UART2 conflict P9.21 (#7:ADAFRUIT-UART2)

(5)bone-capemgr bone_capemgr.9: slot #10: Failed

Can someone please help me out with this?

Thanks,

commit 1c7de2b upstream. There is at least one Chelsio 10Gb card which uses VPD area to store some non-standard blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag". Since 4e1a635 ("vfio/pci: Use kernel VPD access functions"), VFIO blocks access beyond that offset, which prevents the guest "cxgb3" driver from probing the device. The host system does not have this problem as its driver accesses the config space directly without pci_read_vpd(). Add a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registered for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. This is the controller: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is what I parsed from its VPD: === b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K' 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' 002d Large item 74 bytes; name 0x10 #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' #14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' #25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 007a Small item 1 bytes; name 0xf End Tag 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' #13 [EC] len=16: b'110107730D2 ' #26 [SN] len=16: b'97YL102035603V ' #39 [NA] len=12: b'00145E992ED1' #48 [V0] len=6: b'175000' #51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' #63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' #71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' #83 [V7] len=2: b'1 ' #88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' #92 [VA] len=2: b'0 ' #97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' #13 [VD] len=16: b'610-0001-00 H1\x00\x00' #26 [VE] len=16: b'122310_1353 fp ' #39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag 10f3 Large item 13315 bytes; name 0x62 !!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00' === Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 7077fff upstream. Currently, this will hit a BUG_ON for these symlinks as follows: - kernel message ------------[ cut here ]------------ kernel BUG at drivers/staging/erofs/xattr.c:59! SMP PTI CPU: 1 PID: 1170 Comm: getllxattr Not tainted 4.20.0-rc6+ beagleboard#92 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 RIP: 0010:init_inode_xattrs+0x22b/0x270 Code: 48 0f 45 ea f0 ff 4d 34 74 0d 41 83 4c 24 e0 01 31 c0 e9 00 fe ff ff 48 89 ef e8 e0 31 9e ff eb e9 89 e8 e9 ef fd ff ff 0f 0$ <0f> 0b 48 89 ef e8 fb f6 9c ff 48 8b 45 08 a8 01 75 24 f0 ff 4d 34 RSP: 0018:ffffa03ac026bdf8 EFLAGS: 00010246 ------------[ cut here ]------------ ... Call Trace: erofs_listxattr+0x30/0x2c0 ? selinux_inode_listxattr+0x5a/0x80 ? kmem_cache_alloc+0x33/0x170 ? security_inode_listxattr+0x27/0x40 listxattr+0xaf/0xc0 path_listxattr+0x5a/0xa0 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ... ---[ end trace 3c24b49408dc0c72 ]--- Fix it by checking ->xattr_isize in init_inode_xattrs(), and it also fixes improper return value -ENOTSUPP (it should be -ENODATA if xattr is enabled) for those inodes. Fixes: b17500a ("staging: erofs: introduce xattr & acl support") Cc: <[email protected]> # 4.19+ Reported-by: Li Guifu <[email protected]> Tested-by: Li Guifu <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Gao Xiang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…ing driver fails If a gadget driver is in the pending drivers list, a UDC becomes available and udc_bind_to_driver() fails, then it gets deleted from the pending list. i.e. list_del(&driver->pending) in check_pending_gadget_drivers(). Then if that gadget driver is unregistered, usb_gadget_unregister_driver() does a list_del(&driver->pending) again thus causing a page fault as that list entry has been poisoned by the previous list_del(). Fix this by using list_del_init() instead of list_del() in check_pending_gadget_drivers(). Test case: - Make sure no UDC is available - modprobe g_mass_storage file=wrongfile - Load UDC driver so it becomes available lun0: unable to open backing file: wrongfile - modprobe -r g_mass_storage [ 60.900431] Unable to handle kernel paging request at virtual address dead000000000108 [ 60.908346] Mem abort info: [ 60.911145] ESR = 0x96000044 [ 60.914227] Exception class = DABT (current EL), IL = 32 bits [ 60.920162] SET = 0, FnV = 0 [ 60.923217] EA = 0, S1PTW = 0 [ 60.926354] Data abort info: [ 60.929228] ISV = 0, ISS = 0x00000044 [ 60.933058] CM = 0, WnR = 1 [ 60.936011] [dead000000000108] address between user and kernel address ranges [ 60.943136] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 60.948691] Modules linked in: g_mass_storage(-) usb_f_mass_storage libcomposite xhci_plat_hcd xhci_hcd usbcore ti_am335x_adc kfifo_buf omap_rng cdns3 rng_core udc_core crc32_ce xfrm_user crct10dif_ce snd_so6 [ 60.993995] Process modprobe (pid: 834, stack limit = 0x00000000c2aebc69) [ 61.000765] CPU: 0 PID: 834 Comm: modprobe Not tainted 4.19.59-01963-g065f42a60499 #92 [ 61.008658] Hardware name: Texas Instruments SoC (DT) [ 61.014472] pstate: 60000005 (nZCv daif -PAN -UAO) [ 61.019253] pc : usb_gadget_unregister_driver+0x7c/0x108 [udc_core] [ 61.025503] lr : usb_gadget_unregister_driver+0x30/0x108 [udc_core] [ 61.031750] sp : ffff00001338fda0 [ 61.035049] x29: ffff00001338fda0 x28: ffff800846d40000 [ 61.040346] x27: 0000000000000000 x26: 0000000000000000 [ 61.045642] x25: 0000000056000000 x24: 0000000000000800 [ 61.050938] x23: ffff000008d7b0d0 x22: ffff0000088b07c8 [ 61.056234] x21: ffff000001100000 x20: ffff000002020260 [ 61.061530] x19: ffff0000010ffd28 x18: 0000000000000000 [ 61.066825] x17: 0000000000000000 x16: 0000000000000000 [ 61.072121] x15: 0000000000000000 x14: 0000000000000000 [ 61.077417] x13: ffff000000000000 x12: ffffffffffffffff [ 61.082712] x11: 0000000000000030 x10: 7f7f7f7f7f7f7f7f [ 61.088008] x9 : fefefefefefefeff x8 : 0000000000000000 [ 61.093304] x7 : ffffffffffffffff x6 : 000000000000ffff [ 61.098599] x5 : 8080000000000000 x4 : 0000000000000000 [ 61.103895] x3 : ffff000001100020 x2 : ffff800846d40000 [ 61.109190] x1 : dead000000000100 x0 : dead000000000200 [ 61.114486] Call trace: [ 61.116922] usb_gadget_unregister_driver+0x7c/0x108 [udc_core] [ 61.122828] usb_composite_unregister+0x10/0x18 [libcomposite] [ 61.128643] msg_cleanup+0x18/0xfce0 [g_mass_storage] [ 61.133682] __arm64_sys_delete_module+0x17c/0x1f0 [ 61.138458] el0_svc_common+0x90/0x158 [ 61.142192] el0_svc_handler+0x2c/0x80 [ 61.145926] el0_svc+0x8/0xc [ 61.148794] Code: eb03003f d10be033 54ffff21 a94d0281 (f9000420) [ 61.154869] ---[ end trace afb22e9b637bd9a7 ]--- Segmentation fault Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Sekhar Nori <[email protected]>

pdp7 · 2020-06-10T18:24:52Z

Please re-open if still an issue with our current Debian images:
https://github.com/beagleboard/Latest-Images

Please note that the cape manager has been removed and our Debian images now use U-Boot Overlays:
https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays

[ Upstream commit 3c73bc5 ] The threaded interrupt handler may still be called after the usb_gadget_disconnect is called, it causes the structures used at interrupt handler was freed before it uses, eg the usb_request. This issue usually occurs we remove the udc function during the transfer. Below is the example when doing stress test for android switch function, the EP0's request is freed by .unbind (configfs_composite_unbind -> composite_dev_cleanup), but the threaded handler accesses this request during handling setup packet request. In fact, there is no protection between unbind the udc and udc interrupt handling, so we have to avoid the interrupt handler is occurred or scheduled during the .unbind flow. init: Sending signal 9 to service 'adbd' (pid 18077) process group... android_work: did not send uevent (0 0 000000007bec2039) libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 6ms init: Service 'adbd' (pid 18077) received signal 9 init: Sending signal 9 to service 'adbd' (pid 18077) process group... libprocessgroup: Successfully killed process cgroup uid 0 pid 18077 in 0ms init: processing action (init.svc.adbd=stopped) from (/init.usb.configfs.rc:14) init: Received control message 'start' for 'adbd' from pid: 399 (/vendor/bin/hw/android.hardware.usb@1. init: starting service 'adbd'... read descriptors read strings Unable to handle kernel read from unreadable memory at virtual address 000000000000002a android_work: sent uevent USB_STATE=CONNECTED Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e97f1000 using random self ethernet address [000000000000002a] pgd=0000000000000000 Internal error: Oops: 96000004 [beagleboard#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 232 Comm: irq/68-5b110000 Not tainted 5.4.24-06075-g94a6b52b5815 beagleboard#92 Hardware name: Freescale i.MX8QXP MEK (DT) pstate: 00400085 (nzcv daIf +PAN -UAO) using random host ethernet address pc : composite_setup+0x5c/0x1730 lr : android_setup+0xc0/0x148 sp : ffff80001349bba0 x29: ffff80001349bba0 x28: ffff00083a50da00 x27: ffff8000124e6000 x26: ffff800010177950 x25: 0000000000000040 x24: ffff000834e18010 x23: 0000000000000000 x22: 0000000000000000 x21: ffff00083a50da00 x20: ffff00082e75ec40 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001 x11: ffff80001180fb58 x10: 0000000000000040 x9 : ffff8000120fc980 x8 : 0000000000000000 x7 : ffff00083f98df50 x6 : 0000000000000100 x5 : 00000307e8978431 x4 : ffff800011386788 x3 : 0000000000000000 x2 : ffff800012342000 x1 : 0000000000000000 x0 : ffff800010c6d3a0 Call trace: composite_setup+0x5c/0x1730 android_setup+0xc0/0x148 cdns3_ep0_delegate_req+0x64/0x90 cdns3_check_ep0_interrupt_proceed+0x384/0x738 cdns3_device_thread_irq_handler+0x124/0x6e0 cdns3_thread_irq+0x94/0xa0 irq_thread_fn+0x30/0xa0 irq_thread+0x150/0x248 kthread+0xfc/0x128 ret_from_fork+0x10/0x18 Code: 910e8000 f9400693 12001ed7 79400f79 (3940aa61) ---[ end trace c685db37f8773fba ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0002,20002008 Memory Limit: none Rebooting in 5 seconds.. Reviewed-by: Jun Li <[email protected]> Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

pdp7 closed this as completed Jun 10, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Boot up issue with Beaglebone black. #92

Boot up issue with Beaglebone black. #92

ghost commented Jun 2, 2016

pdp7 commented Jun 10, 2020

Boot up issue with Beaglebone black. #92

Boot up issue with Beaglebone black. #92

Comments

ghost commented Jun 2, 2016

pdp7 commented Jun 10, 2020