From f581a0dd744fe32b0a8805e279c59ec1ac676d60 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Thu, 31 Aug 2017 16:47:43 +0200 Subject: [PATCH] wl1251: add a missing spin_lock_init() wl1251: add a missing spin_lock_init() This fixes the following kernel warning: [ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745 [ 5668.771850] lock: 0xce63ef20, .magic: 00000000, .owner: /-1, .owner_cpu: 0 [ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G W 4.12.0-03002-gec979a4-dirty #40 [ 5668.772796] Hardware name: Nokia RX-51 board [ 5668.773071] Workqueue: phy1 wl1251_irq_work [ 5668.773345] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 5668.773803] [] (show_stack) from [] (do_raw_spin_lock+0x6c/0xa0) [ 5668.774230] [] (do_raw_spin_lock) from [] (_raw_spin_lock_irqsave+0x10/0x18) [ 5668.774658] [] (_raw_spin_lock_irqsave) from [] (wl1251_op_tx+0x38/0x5c) [ 5668.775115] [] (wl1251_op_tx) from [] (ieee80211_tx_frags+0x188/0x1c0) [ 5668.775543] [] (ieee80211_tx_frags) from [] (__ieee80211_tx+0x6c/0x130) [ 5668.775970] [] (__ieee80211_tx) from [] (ieee80211_tx+0xdc/0x104) [ 5668.776367] [] (ieee80211_tx) from [] (__ieee80211_subif_start_xmit+0x454/0x8c8) [ 5668.776824] [] (__ieee80211_subif_start_xmit) from [] (ieee80211_subif_start_xmit+0x30/0x2fc) [ 5668.777343] [] (ieee80211_subif_start_xmit) from [] (dev_hard_start_xmit+0x80/0x118) ... by adding the missing spin_lock_init(). Reported-by: Pavel Machek Cc: Kalle Valo Signed-off-by: Cong Wang Acked-by: Pavel Machek Signed-off-by: Kalle Valo Signed-off-by: Pavel Machek Cc: stable@kernel.org Signed-off-by: David S. Miller --- drivers/net/wireless/ti/wl1251/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index 08f0477f78d93..9915d83a4a305 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -1571,6 +1571,7 @@ struct ieee80211_hw *wl1251_alloc_hw(void) wl->state = WL1251_STATE_OFF; mutex_init(&wl->mutex); + spin_lock_init(&wl->wl_lock); wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE; wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;