net: Introduce VRF device driver

This driver borrows heavily from IPvlan and teaming drivers.

Routing domains (VRF-lite) are created by instantiating a VRF master
device with an associated table and enslaving all routed interfaces that
participate in the domain. As part of the enslavement, all connected
routes for the enslaved devices are moved to the table associated with
the VRF device. Outgoing sockets must bind to the VRF device to function.

Standard FIB rules bind the VRF device to tables and regular fib rule
processing is followed. Routed traffic through the box, is forwarded by
using the VRF device as the IIF and following the IIF rule to a table
that is mated with the VRF.

Example:

   Create vrf 1:
     ip link add vrf1 type vrf table 5
     ip rule add iif vrf1 table 5
     ip rule add oif vrf1 table 5
     ip route add table 5 prohibit default
     ip link set vrf1 up

   Add interface to vrf 1:
     ip link set eth1 master vrf1

Signed-off-by: Shrijeet Mukherjee <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

drivers/net/Kconfig

@@ -297,6 +297,13 @@ config NLMON
 	  diagnostics, etc. This is mostly intended for developers or support
 	  to debug netlink issues. If unsure, say N.
 
+config NET_VRF
+	tristate "Virtual Routing and Forwarding (Lite)"
+	depends on IP_MULTIPLE_TABLES && IPV6_MULTIPLE_TABLES
+	---help---
+	  This option enables the support for mapping interfaces into VRF's. The
+	  support enables VRF devices.
+
 endif # NET_CORE
 
 config SUNGEM_PHY

drivers/net/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
 obj-$(CONFIG_VXLAN) += vxlan.o
 obj-$(CONFIG_GENEVE) += geneve.o
 obj-$(CONFIG_NLMON) += nlmon.o
+obj-$(CONFIG_NET_VRF) += vrf.o
 
 #
 # Networking Drivers