Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

DS216play with DSM 6.2.3 update 3 didn't always work #103

Closed
Jacky71wu opened this issue Feb 21, 2021 · 2 comments
Closed

DS216play with DSM 6.2.3 update 3 didn't always work #103

Jacky71wu opened this issue Feb 21, 2021 · 2 comments

Comments

@Jacky71wu
Copy link

Description of the problem

Plug 2.5gbe to DS216play read USB 3.0 port (DSM 6.2.3-25426 Update 3) sometimes DSM will show 2.5gbe network. sometime won't

Replace this line with your answer.

Description of your products

  • the product name of your NAS model
    • and output of uname -a command
      Linux SWW-NAS 3.10.105 #25426 SMP Tue Nov 24 17:15:05 CST 2020 armv7l GNU/Linux synology_monaco_ds216play
    • DSM version x.x
      DSM 6.2.3-25426 Update 3
  • the product name of the ethernet dongle
    USB 10/100/1G/2.5G LAN - Realtek Semiconductor Corp.

Description of your environment

  • connect directly to a PC or using a hub
    • PC: NIC model name or chipset name
      Windows 10
    • Hub: model name
      QSW-1105-5T
  • cable category (Cat.5e or Cat.6 or Cat.7)
    CAT 5E

Output of dmesg command

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.10.105 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #25426 SMP Tue Nov 24 17:15:05 CST 2020
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: STi SoC with Flattened Device Tree, model: STiH410 B2120
[    0.000000] Ignoring memory below PHYS_OFFSET: 0x40000000-0x43000000
[    0.000000] Ignoring memory below PHYS_OFFSET: 0x42000000-0x43000000
[    0.000000] cma: CMA: reserved 16 MiB at 5f000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 118784
[    0.000000] free_area_init_node: node 0, pgdat 806e0000, node_mem_map 8073d000
[    0.000000]   Normal zone: 928 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 118784 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 7 pages/cpu @80b2b000 s6976 r8192 d13504 u32768
[    0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 117856
[    0.000000] Kernel command line: console=ttyS0,115200 CONSOLE=/dev/ttyS0 ip=off mtdparts=stm-nand-bch.0:0x500000(boot),-(rfs) bpa2parts=BPA2_Region|aud-coded|aud-transcoded|vid-coded|vid-transcoded|vid-raw-input|vid-output-0|vid-decimated-1|vid-copied-1|vid-macroblock-0|vid-extra-data-0|vid-extra-data-1|v4l2-coded-video-buffers|vid-enc-data-0|vid-enc-scaled-0|vid-encoded-0|v4l2-clut|v4l2-grab|gfx-memory|aud-codec-data|vid-codec-data|aud-output-0|aud-output-1|vid-output-1|vid-decimated-0|vid-copied-0|vid-macroblock-1|blitter|vid-enc-data-1|vid-enc-scaled-1|vid-encoded-1|coredisplay-video|multicom|hades-l3|BPA2_Region0|BPA2_Region1:480M:0x62000000,v4l2-vb2|v4l2-stmc8jpg|v4l2-stmvout|v4l2-compo:24M:0x60800000,coprocs:32M:0x40000000,modules|audio:8M:0x60000000,bigphysarea|te-buffers|m2m-ca3:48M:0x48000000,STMCReserve:32768:0x47FF8000 vmalloc=775m mem=503316480@0x42000000 root=/dev/md0 rw syno_hw_version=DS216play hd_power_on_seq=2 ihd_num=2 netif_num=1 flash_size=8 phys_memsize=1024 syno_me
[    0.000000] bpa2: partition 'BPA2_Region' created at 0x62000000 (high), size 491520 kB (0x1e000000 B)
[    0.000000] bpa2: partition 'v4l2-vb2' created at 0x60800000 (high), size 24576 kB (0x01800000 B)
[    0.000000] bpa2: partition 'coprocs' created at 0x40000000 (high), size 32768 kB (0x02000000 B)
[    0.000000] bpa2: partition 'modules' created at 0x60000000 (high), size 8192 kB (0x00800000 B)
[    0.000000] bpa2: partition 'bigphysarea' created at 0x48000000 (low), size 49152 kB (0x03000000 B)
[    0.000000] bpa2: partition 'STMCReserve' created at 0x47ff8000 (low), size 32 kB (0x00008000 B)
[    0.000000] Synology Hardware Version: DS216play-j
[    0.000000] Internal HD num: 2
[    0.000000] Internal netif num: 1
[    0.000000] SYNO Transcoding Memory Mode: 3
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 464MB = 464MB total
[    0.000000] Memory: 393560k/393560k available, 81576k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
                   vmalloc : 0x9d800000 - 0xff000000   (1560 MB)
                   lowmem  : 0x80000000 - 0x9d000000   ( 464 MB)
                   modules : 0x7f000000 - 0x80000000   (  16 MB)
                     .text : 0x80008000 - 0x80667be4   (6527 kB)
                     .init : 0x80668000 - 0x806a2b40   ( 235 kB)
                     .data : 0x806a4000 - 0x806e0ac0   ( 243 kB)
                      .bss : 0x806e0ac0 - 0x8073cd24   ( 369 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] st-lpc: lpc_clk running @ 30000000 Hz
[    0.000000] sched_clock: 32 bits at 30MHz, resolution 33ns, wraps every 143165ms
[    0.000000] st-lpc: clocksource initialised: iomem: 9d81c000
[    0.000000] L310 cache controller enabled
[    0.000000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x10480000, Cache size: 1048576 B
[    0.000000] Console: colour dummy device 80x30
[    0.001795] Calibrating delay loop... 2996.63 BogoMIPS (lpj=14983168)
[    0.060212] pid_max: default: 32768 minimum: 301
[    0.060282] Security Framework initialized
[    0.060297] AppArmor: AppArmor initialized
[    0.060325] Mount-cache hash table entries: 512
[    0.060686] CPU: Testing write buffer coherency: ok
[    0.060990] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.061564] Setting up static identity map for 0x804c80d0 - 0x804c81ac
[    0.062011] CPU1: Booted secondary processor
[    0.120233] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.120283] Brought up 2 CPUs
[    0.120292] SMP: Total of 2 processors activated (5985.89 BogoMIPS).
[    0.120296] CPU: All CPU(s) started in SVC mode.
[    0.120648] devtmpfs: initialized
[    0.123774] xor: measuring software checksum speed
[    0.220221]    arm4regs  :  2325.200 MB/sec
[    0.320221]    8regs     :  1668.400 MB/sec
[    0.420221]    32regs    :  1695.200 MB/sec
[    0.420225] xor: using function: arm4regs (2325.200 MB/sec)
[    0.420233] pinctrl core: initialized pinctrl subsystem
[    0.420577] regulator-dummy: no parameters
[    0.421172] NET: Registered protocol family 16
[    0.424348] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.428517] syscon 9620000.sbc-syscfg: regmap [mem 0x09620000-0x09620fff] registered
[    0.428654] syscon 9280000.front-syscfg: regmap [mem 0x09280000-0x09280fff] registered
[    0.428779] syscon 9290000.rear-syscfg: regmap [mem 0x09290000-0x09290fff] registered
[    0.428899] syscon 92a0000.flash-syscfg: regmap [mem 0x092a0000-0x092a0fff] registered
[    0.429030] syscon 9600000.fvdp-lite-syscfg: regmap [mem 0x09600000-0x09600fff] registered
[    0.429148] syscon 92b0000.core-syscfg: regmap [mem 0x092b0000-0x092b0fff] registered
[    0.429272] syscon 94b5100.lpm-syscfg: regmap [mem 0x094b5100-0x094b60ff] registered
[    0.442629] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.442637] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.442794] st-pinctrl 961f080.pin-controller-sbc: nbanks = 6
[    0.442800] st-pinctrl 961f080.pin-controller-sbc: nfunctions = 14
[    0.442805] st-pinctrl 961f080.pin-controller-sbc: ngroups = 27
[    0.442955] st-pinctrl 961f080.pin-controller-sbc: PIO0 bank added.
[    0.443133] st-pinctrl 961f080.pin-controller-sbc: PIO1 bank added.
[    0.443291] st-pinctrl 961f080.pin-controller-sbc: PIO2 bank added.
[    0.443460] st-pinctrl 961f080.pin-controller-sbc: PIO3 bank added.
[    0.443620] st-pinctrl 961f080.pin-controller-sbc: PIO4 bank added.
[    0.443777] st-pinctrl 961f080.pin-controller-sbc: PIO5 bank added.
[    0.443865] st-pinctrl 961f080.pin-controller-sbc: Function[0         name:wakeup-pin,       groups:1]
[    0.443875] st-pinctrl 961f080.pin-controller-sbc: Function[1         name:rc,       groups:1]
[    0.443885] st-pinctrl 961f080.pin-controller-sbc: Function[2         name:sbc_serial0,      groups:1]
[    0.443894] st-pinctrl 961f080.pin-controller-sbc: Function[3         name:sbc_serial1,      groups:1]
[    0.443904] st-pinctrl 961f080.pin-controller-sbc: Function[4         name:i2c10,    groups:1]
[    0.443913] st-pinctrl 961f080.pin-controller-sbc: Function[5         name:i2c11,    groups:1]
[    0.443928] st-pinctrl 961f080.pin-controller-sbc: Function[6         name:keyscan,  groups:1]
[    0.443983] st-pinctrl 961f080.pin-controller-sbc: Function[7         name:gmac1,    groups:8]
[    0.443997] st-pinctrl 961f080.pin-controller-sbc: Function[8         name:pwm1,     groups:4]
[    0.444010] st-pinctrl 961f080.pin-controller-sbc: Function[9         name:spi10,    groups:2]
[    0.444023] st-pinctrl 961f080.pin-controller-sbc: Function[10        name:spi11,    groups:2]
[    0.444035] st-pinctrl 961f080.pin-controller-sbc: Function[11        name:spi12,    groups:2]
[    0.444044] st-pinctrl 961f080.pin-controller-sbc: Function[12        name:cec0,     groups:1]
[    0.444061] st-pinctrl 961f080.pin-controller-sbc: Function[13        name:hdmirx0,  groups:1]
[    0.444161] st-pinctrl 920f080.pin-controller-front0: nbanks = 10
[    0.444167] st-pinctrl 920f080.pin-controller-front0: nfunctions = 24
[    0.444173] st-pinctrl 920f080.pin-controller-front0: ngroups = 53
[    0.444316] st-pinctrl 920f080.pin-controller-front0: PIO10 bank added.
[    0.444480] st-pinctrl 920f080.pin-controller-front0: PIO11 bank added.
[    0.444645] st-pinctrl 920f080.pin-controller-front0: PIO12 bank added.
[    0.444813] st-pinctrl 920f080.pin-controller-front0: PIO13 bank added.
[    0.444977] st-pinctrl 920f080.pin-controller-front0: PIO14 bank added.
[    0.445143] st-pinctrl 920f080.pin-controller-front0: PIO15 bank added.
[    0.445311] st-pinctrl 920f080.pin-controller-front0: PIO16 bank added.
[    0.445471] st-pinctrl 920f080.pin-controller-front0: PIO17 bank added.
[    0.445634] st-pinctrl 920f080.pin-controller-front0: PIO18 bank added.
[    0.445799] st-pinctrl 920f080.pin-controller-front0: PIO19 bank added.
[    0.445894] st-pinctrl 920f080.pin-controller-front0: Function[0      name:serial0,  groups:4]
[    0.445914] st-pinctrl 920f080.pin-controller-front0: Function[1      name:serial1,  groups:4]
[    0.445932] st-pinctrl 920f080.pin-controller-front0: Function[2      name:serial2,  groups:1]
[    0.445953] st-pinctrl 920f080.pin-controller-front0: Function[3      name:mmc1,     groups:1]
[    0.445964] st-pinctrl 920f080.pin-controller-front0: Function[4      name:i2c0,     groups:1]
[    0.445975] st-pinctrl 920f080.pin-controller-front0: Function[5      name:i2c1,     groups:1]
[    0.445985] st-pinctrl 920f080.pin-controller-front0: Function[6      name:i2c2,     groups:1]
[    0.446003] st-pinctrl 920f080.pin-controller-front0: Function[7      name:i2c3,     groups:3]
[    0.446026] st-pinctrl 920f080.pin-controller-front0: Function[8      name:spi0,     groups:4]
[    0.446049] st-pinctrl 920f080.pin-controller-front0: Function[9      name:spi1,     groups:4]
[    0.446080] st-pinctrl 920f080.pin-controller-front0: Function[10     name:spi2,     groups:6]
[    0.446112] st-pinctrl 920f080.pin-controller-front0: Function[11     name:spi3,     groups:6]
[    0.446132] st-pinctrl 920f080.pin-controller-front0: Function[12     name:systrace, groups:1]
[    0.446141] st-pinctrl 920f080.pin-controller-front0: Function[13     name:scr0,     groups:1]
[    0.446150] st-pinctrl 920f080.pin-controller-front0: Function[14     name:scr1,     groups:1]
[    0.446181] st-pinctrl 920f080.pin-controller-front0: Function[15     name:tsin0,    groups:2]
[    0.446211] st-pinctrl 920f080.pin-controller-front0: Function[16     name:tsin1,    groups:2]
[    0.446241] st-pinctrl 920f080.pin-controller-front0: Function[17     name:tsin2,    groups:2]
[    0.446254] st-pinctrl 920f080.pin-controller-front0: Function[18     name:tsin3,    groups:1]
[    0.446268] st-pinctrl 920f080.pin-controller-front0: Function[19     name:tsin4,    groups:1]
[    0.446289] st-pinctrl 920f080.pin-controller-front0: Function[20     name:tsin5,    groups:2]
[    0.446318] st-pinctrl 920f080.pin-controller-front0: Function[21     name:tsout0,   groups:2]
[    0.446332] st-pinctrl 920f080.pin-controller-front0: Function[22     name:tsout1,   groups:1]
[    0.446354] st-pinctrl 920f080.pin-controller-front0: Function[23     name:mtsin0,   groups:1]
[    0.446447] st-pinctrl 921f080.pin-controller-front1: nbanks = 1
[    0.446454] st-pinctrl 921f080.pin-controller-front1: nfunctions = 1
[    0.446459] st-pinctrl 921f080.pin-controller-front1: ngroups = 1
[    0.446602] st-pinctrl 921f080.pin-controller-front1: PIO20 bank added.
[    0.446703] st-pinctrl 921f080.pin-controller-front1: Function[0      name:tsin4,    groups:1]
[    0.446779] st-pinctrl 922f080.pin-controller-rear: nbanks = 6
[    0.446785] st-pinctrl 922f080.pin-controller-rear: nfunctions = 11
[    0.446790] st-pinctrl 922f080.pin-controller-rear: ngroups = 17
[    0.446936] st-pinctrl 922f080.pin-controller-rear: PIO30 bank added.
[    0.447117] st-pinctrl 922f080.pin-controller-rear: PIO31 bank added.
[    0.447281] st-pinctrl 922f080.pin-controller-rear: PIO32 bank added.
[    0.447436] st-pinctrl 922f080.pin-controller-rear: PIO33 bank added.
[    0.447610] st-pinctrl 922f080.pin-controller-rear: PIO34 bank added.
[    0.447776] st-pinctrl 922f080.pin-controller-rear: PIO35 bank added.
[    0.448010] st-pinctrl 922f080.pin-controller-rear: Function[0        name:dvo,      groups:2]
[    0.448025] st-pinctrl 922f080.pin-controller-rear: Function[1        name:i2c4,     groups:1]
[    0.448039] st-pinctrl 922f080.pin-controller-rear: Function[2        name:i2c5,     groups:1]
[    0.448053] st-pinctrl 922f080.pin-controller-rear: Function[3        name:usb0,     groups:1]
[    0.448066] st-pinctrl 922f080.pin-controller-rear: Function[4        name:usb1,     groups:1]
[    0.448087] st-pinctrl 922f080.pin-controller-rear: Function[5        name:usb3,     groups:1]
[    0.448098] st-pinctrl 922f080.pin-controller-rear: Function[6        name:pwm0,     groups:1]
[    0.448132] st-pinctrl 922f080.pin-controller-rear: Function[7        name:spi4,     groups:4]
[    0.448168] st-pinctrl 922f080.pin-controller-rear: Function[8        name:i2s_out,  groups:2]
[    0.448206] st-pinctrl 922f080.pin-controller-rear: Function[9        name:i2s_in,   groups:2]
[    0.448217] st-pinctrl 922f080.pin-controller-rear: Function[10       name:spdif_out,        groups:1]
[    0.448310] st-pinctrl 923f080.pin-controller-flash: nbanks = 3
[    0.448316] st-pinctrl 923f080.pin-controller-flash: nfunctions = 3
[    0.448321] st-pinctrl 923f080.pin-controller-flash: ngroups = 3
[    0.448455] st-pinctrl 923f080.pin-controller-flash: PIO40 bank added.
[    0.448625] st-pinctrl 923f080.pin-controller-flash: PIO41 bank added.
[    0.448795] st-pinctrl 923f080.pin-controller-flash: PIO42 bank added.
[    0.448920] st-pinctrl 923f080.pin-controller-flash: Function[0       name:mmc0,     groups:1]
[    0.448950] st-pinctrl 923f080.pin-controller-flash: Function[1       name:fsm,      groups:1]
[    0.449011] st-pinctrl 923f080.pin-controller-flash: Function[2       name:nand,     groups:1]
[    0.450917] reset-stih407 powerdown-controller.8: registered
[    0.452608] reset-stih407 softreset-controller.10: registered
[    0.452804] reset-stih407 picophyreset-controller.11: registered
[    0.455658] st-clk clocks.0: SoC clock tree intialized
[    0.466127] bio: create slab <bio-0> at 0
[    0.630230] raid6: int32x1  gen()   241 MB/s
[    0.800383] raid6: int32x1  xor()   179 MB/s
[    0.970382] raid6: int32x2  gen()   326 MB/s
[    1.140352] raid6: int32x2  xor()   212 MB/s
[    1.310388] raid6: int32x4  gen()   314 MB/s
[    1.480324] raid6: int32x4  xor()   218 MB/s
[    1.650399] raid6: int32x8  gen()   350 MB/s
[    1.820226] raid6: int32x8  xor()   221 MB/s
[    1.820231] raid6: using algorithm int32x8 gen() (350 MB/s)
[    1.820234] raid6: .... xor() 221 MB/s, rmw enabled
[    1.820237] raid6: using intx1 recovery algorithm
[    1.820496] st-fdma 8e20000.fdma-mpe: IRQ: 37
[    1.820513] st-fdma 8e20000.fdma-mpe: Base address: 9d8c0000
[    1.822117] st-fdma 8e40000.fdma-mpe: IRQ: 39
[    1.822131] st-fdma 8e40000.fdma-mpe: Base address: 9d9c0000
[    1.823647] st-fdma 8e60000.fdma-mpe: IRQ: 41
[    1.823670] st-fdma 8e60000.fdma-mpe: Base address: 9da00000
[    1.825447] vmmc0: at 3300 mV
[    1.825493] st-vsense 9061004.voltage-regulator: vmmc0  vsense voltage regulator registered
[    1.825859] vgaarb: loaded
[    1.826148] SCSI subsystem initialized
[    1.826359] libata version 3.00 loaded.
[    1.826595] media: Linux media interface: v0.10
[    1.826659] Linux video capture interface: v2.00
[    1.826869] pps_core: LinuxPPS API ver. 1 registered
[    1.826874] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    1.826926] PTP clock support registered
[    1.827843] Switching to clocksource st-lpc clocksource
[    1.828111] AppArmor: AppArmor Filesystem Enabled
[    1.837279] NET: Registered protocol family 2
[    1.837664] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    1.837703] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    1.837739] TCP: Hash tables configured (established 4096 bind 4096)
[    1.837778] TCP: reno registered
[    1.837785] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.837805] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.837974] NET: Registered protocol family 1
[    1.838128] RPC: Registered named UNIX socket transport module.
[    1.838133] RPC: Registered udp transport module.
[    1.838137] RPC: Registered tcp transport module.
[    1.838140] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.838147] PCI: CLS 0 bytes, default 64
[    1.838251] Trying to unpack rootfs image as initramfs...
[    3.131127] Freeing initrd memory: 3912K (80c2c000 - 80ffe000)
[    3.133008] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    3.134453] sti pm: Copying poke table & poke loop to buffer
[    3.134463] sti pm: entering prepare:CONTROLLER PASSIVE STANDBY
[    3.134468] sti pm: support mode: CONTROLLER PASSIVE STANDBY
[    3.134471] sti pm: Suspend support registered
[    3.134638] synology :         fan ctrl initialized.
[    3.134649] synology :        fan sense initialized.
[    3.134662] synology :       sata power initialized.
[    3.134679] synology :         model id initialized.
[    3.134687] synology :    disk led ctrl initialized.
[    3.134696] synology :     phy led ctrl initialized.
[    3.135992] Initialise module verification
[    3.136038] audit: initializing netlink socket (disabled)
[    3.136062] type=2000 audit(3.120:1): initialized
[    3.183181] st-pinctrl 920f080.pin-controller-front0: maps: function systrace group systrace-default num 6
[    3.183293] stm-systrace 9180000.systrace: Systrace: syscfg0=0x003f0000 (prev: 0x003f0000)
[    3.183304] stm-systrace 9180000.systrace: Systrace: syscfg1=0x00580058 (prev: 0x00580058)
[    3.183312] stm-systrace 9180000.systrace: Systrace: syscfg2=0x00990098 (prev: 0x00990098)
[    3.183320] stm-systrace 9180000.systrace: Systrace: syscfg3=0x00530050 (prev: 0x00530050)
[    3.183328] stm-systrace 9180000.systrace: Systrace: syscfg4=0x00550054 (prev: 0x00550054)
[    3.183336] stm-systrace 9180000.systrace: Systrace: syscfg5=0x00570056 (prev: 0x00570056)
[    3.183344] stm-systrace 9180000.systrace: Systrace: syscfg6=0x03ff03ff (prev: 0x03ff0000)
[    3.183354] stm-systrace 9180000.systrace: Systrace: STM_CR[0x0000] = 0x00000600 (prev. 0x00000000)
[    3.183362] stm-systrace 9180000.systrace: Systrace: STM_MCR[0x0008] = 0x00000000 (prev. 0x00000000)
[    3.183370] stm-systrace 9180000.systrace: Systrace: STM_TER[0x0010] = 0x000003ff (prev. 0x000003ff)
[    3.183378] stm-systrace 9180000.systrace: Systrace: STM_FTR[0x0080] = 0x00000001 (prev. 0x00000000)
[    3.183386] stm-systrace 9180000.systrace: Systrace: STM_CTR[0x0088] = 0x00000001 (prev. 0x00000000)
[    3.183392] Systrace: STM IP revision is V3
[    3.183396] Systrace: STM_PID=0x00680dec(0x00680dec)
[    3.183400] Systrace: STM_CID=0xb105f00d(0xb105f00d)
[    3.183404] MTT: registering output driver stm
[    3.183409] stm-systrace 9180000.systrace: Systrace: driver probed.
[    3.195888] VFS: Disk quotas dquot_6.5.2
[    3.196191] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.199330] NFS: Registering the id_resolver key type
[    3.199351] Key type id_resolver registered
[    3.199356] Key type id_legacy registered
[    3.199382] msgmni has been set to 808
[    3.200022] async_tx: api initialized (async)
[    3.200031] Key type asymmetric registered
[    3.200035] Asymmetric key parser 'x509' registered
[    3.200427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    3.200435] io scheduler noop registered
[    3.200451] io scheduler cfq registered (default)
[    3.324739] STMicroelectronics ASC driver initialized
[    3.324884] st-pinctrl 961f080.pin-controller-sbc: maps: function sbc_serial0 group sbc_serial0-0 num 3
[    3.324985] 9530000.serial: ttyS0 at MMIO 0x9530000 (irq = 170) is a st-asc
[    4.982756] console [ttyS0] enabled
[    4.986586] st-pinctrl 961f080.pin-controller-sbc: maps: function sbc_serial1 group sbc_serial1-0 num 3
[    4.996050] 9531000.serial: ttyS1 at MMIO 0x9531000 (irq = 171) is a st-asc
[    5.004023] st-hwrandom 8a89000.rng: ST Random Number Generator Device Probe Successful
[    5.021164] brd: module loaded
[    5.024210] Loading iSCSI transport class v2.0-870.
[    5.031803] ahci ahci.0: can't get clock
[    5.035722] miphy28lp-phy 9b22000.miphy28lp: miphy28lp_phy_init_sata
[    5.042079] miphy28lp-phy 9b22000.miphy28lp: sata-up mode, addr 0x9d8e4000
[    5.053021] ahci ahci.0: forcing PORTS_IMPL to 0x1
[    5.057830] ahci ahci.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    5.065748] ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[    5.075053] scsi0 : ahci_platform
[    5.078795] ata1: SATA max UDMA/133 mmio [mem 0x09b20000-0x09b20fff] port 0x100 irq 191
[   13.467885] ata1: link is slow to respond, please be patient (ready=0)
[   18.267884] ata1: softreset failed (device not ready)
[   18.272922] ata1: SRST fail, set srst fail flag
[   18.817889] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   18.824057] ata1: link reset sucessfully clear error flags
[   18.830343] ata1.00: ATA-9: ST3000VN000-1HJ166, SC60, max UDMA/133
[   18.836510] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   18.843294] ata1.00: SN:            W6A0JCH1
[   18.848430] ata1.00: configured for UDMA/133
[   18.853359] scsi 0:0:0:0: Direct-Access     ATA      ST3000VN000-1HJ166       SC60 PQ: 0 ANSI: 5
[   18.862918] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[   18.870666] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   18.876151] sd 0:0:0:0: [sda] Write Protect is off
[   18.876783] ahci ahci.1: can't get clock
[   18.876790] miphy28lp-phy 9b2a000.miphy28lp: miphy28lp_phy_init_sata
[   18.876794] miphy28lp-phy 9b2a000.miphy28lp: sata-up mode, addr 0x9d8ea000
[   18.878694] ahci ahci.1: forcing PORTS_IMPL to 0x1
[   18.878731] ahci ahci.1: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[   18.878737] ahci ahci.1: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[   18.918490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   18.918563] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   18.929357] scsi1 : ahci_platform
[   18.933059] ata2: SATA max UDMA/133 mmio [mem 0x09b28000-0x09b28fff] port 0x100 irq 202
[   18.941079] Delay 5 seconds to wait for disk 2 ready.
[   18.985066]  sda: sda1 sda2 sda3
[   18.989997] sd 0:0:0:0: [sda] Attached SCSI disk
[   32.307886] ata2: link is slow to respond, please be patient (ready=0)
[   37.007889] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   37.015595] ata2.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133
[   37.021862] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   37.028644] ata2.00: SN:            ZGY39KV9
[   37.039006] ata2.00: configured for UDMA/133
[   37.044308] scsi 1:0:0:0: Direct-Access     ATA      ST4000VN008-2DR166       SC60 PQ: 0 ANSI: 5
[   37.053898] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[   37.061645] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   37.067370] sd 1:0:0:0: [sdb] Write Protect is off
[   37.072165] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   37.072243] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.082549] st-pinctrl 923f080.pin-controller-flash: maps: function fsm group fsm num 7
[   37.090970] stm-spi-fsm 9022000.spifsm: No provision for SPI reset on boot-from-spi system
[   37.099247] stm-spi-fsm 9022000.spifsm: Individual block locking scheme enabled
[   37.106545] stm-spi-fsm 9022000.spifsm: found device: n25q064, size = 800000 (8MiB) erasesize = 0x00010000 (64KiB)
[   37.116900] Searching for RedBoot partition table in n25q064 at offset 0x7f0000
[   37.129403] 6 RedBoot partitions found on MTD device n25q064
[   37.133917]  sdb: sdb1 sdb2 sdb3
[   37.138273] Creating 6 MTD partitions on "n25q064":
[   37.143139] 0x000000000000-0x0000000c0000 : "RedBoot"
[   37.149699] sd 1:0:0:0: [sdb] Attached SCSI disk
[   37.154518] 0x0000000c0000-0x000000390000 : "zImage"
[   37.160530] 0x000000390000-0x0000007d0000 : "rd.gz"
[   37.166378] 0x0000007d0000-0x0000007e0000 : "vendor"
[   37.171364] vender Mac0 address : 00:11:32:54:3e:37
[   37.171371] vender Mac1 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[   37.171375] vender Mac2 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[   37.171379] vender Mac3 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
[   37.171386] serial number='15C0NEN075200'
[   37.172404] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
[   37.179070] 0x0000007f0000-0x000000800000 : "FIS directory"
[   37.188229] st-pinctrl 961f080.pin-controller-sbc: maps: function gmac1 group rgmii1-0 num 13
[   37.196748] st-pinctrl 961f080.pin-controller-sbc: maps: function gmac1 group rgmii1-mdio num 3
[   37.205629] stmmaceth 9630000.dwmac: phy-addr property limits bus scan to this addr
[   37.213395] stmmac - user ID: 0xca, Synopsys ID: 0x37
[   37.218451]  Ring mode enabled
[   37.221491]  DMA HW capability register supported
[   37.226006]  Enhanced/Alternate descriptors
[   37.230365]  Enabled extended descriptors
[   37.234359]  RX Checksum Offload Engine supported (type 2)
[   37.239843]  TX Checksum insertion supported
[   37.244096]  Wake-Up On Lan supported
[   37.247759]  Enable RX Mitigation via HW Watchdog Timer
[   37.254268] libphy: stmmac: probed
[   37.257661] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) active
[   37.264994] i2c /dev entries driver
[   37.268750] st-pinctrl 922f080.pin-controller-rear: maps: function i2c4 group i2c4-default num 3
[   37.278484] st-i2c 9844000.i2c: ST I2C(0x0) initialized
[   37.283736] st-pinctrl 922f080.pin-controller-rear: maps: function i2c5 group i2c5-default num 3
[   37.292569] st-i2c 9845000.i2c: No ID specified in DT alias
[   37.300788] st_thermal 91a0000.temp0: STMicroelectronics thermal sensor initialised
[   37.309451] st-lpc-wdt 8787000.lpc_wdt: LPC Watchdog driver registered, reset type is cold
[   37.318064] md: linear personality registered for level -1
[   37.323537] md: raid0 personality registered for level 0
[   37.328845] md: raid1 personality registered for level 1
[   37.334140] md: raid10 personality registered for level 10
[   37.339846] md: raid6 personality registered for level 6
[   37.345145] md: raid5 personality registered for level 5
[   37.350455] md: raid4 personality registered for level 4
[   37.356496] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
[   37.365427] sdhci: Secure Digital Host Controller Interface driver
[   37.371614] sdhci: Copyright(c) Pierre Ossman
[   37.375955] sdhci-pltfm: SDHCI platform and OF driver helper
[   37.390999] Mali: Mali device driver loaded
[   37.391910] ST_DDR CNTRL driver registered
[   37.396373] st-lpm driver registered
[   37.400336] TCP: cubic registered
[   37.403641] NET: Registered protocol family 17
[   37.408143] Key type dns_resolver registered
[   37.412520] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[   37.420199] Registering SWP/SWPB emulation handler
[   37.425274] cpufreq_cpu0: failed to get cpu0 regulator: -19
[   37.435375] Loading module verification blacklist certificates
[   37.441243] Loading module verification certificates
[   37.446268] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[   37.461343] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[   37.471723] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[   37.483568] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[   37.509785] MTT: registering output driver dfs
[   37.514249] MTT: multicore-trace initialized.
[   37.518667] vmmc0: disabling
[   37.521542] regulator-dummy: disabling
[   37.543344] Freeing unused kernel memory: 232K (80668000 - 806a2000)
[   37.651692] stih407-usb-genphy f8.usbpicophy: STiH407 USB Generic picoPHY driver probed!
[   37.660642] stih407-usb-genphy fc.usbpicophy: STiH407 USB Generic picoPHY driver probed!
[   37.670922] stih407-usb-genphy 100.usbpicophy: STiH407 USB Generic picoPHY driver probed!
[   37.698714] sti-usb3-phy 8f90000.usb3_phy: USB3 MiPHY Ref clk 30 MHz enabled
[   37.705829] sti-usb3-phy 8f90000.usb3_phy: usb3 ioaddr 0x9d974000, pipew ioaddr 0x9d976000
[   37.714163] sti-usb3-phy 8f90000.usb3_phy: USB3 MiPHY2 probed
[   37.789103] usbcore: registered new interface driver usbfs
[   37.796827] usbcore: registered new interface driver hub
[   37.807125] usbcore: registered new device driver usb
[   37.874062] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   37.897754] ehci-pci: EHCI PCI platform driver
[   37.923055] ehci-platform: EHCI generic platform driver
[   37.950638] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   38.022599] st-pinctrl 922f080.pin-controller-rear: maps: function usb0 group usb2-0 num 3
[   38.030948] st-hcd 9a03c00.usb: 48MHz ohci clk not found
[   38.036380] stih407-usb-genphy f8.usbpicophy: Generic picoPHY usb port init.
[   38.043440] stih407-usb-genphy f8.usbpicophy: found picoPHY in rst state
[   38.052211] ehci-platform ehci-platform.0: EHCI Host Controller
[   38.058164] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[   38.066712] ehci-platform ehci-platform.0: irq 183, io mem 0x09a03e00
[   38.088097] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
[   38.097099] hub 1-0:1.0: USB hub found
[   38.100897] hub 1-0:1.0: 1 port detected
[   38.106934] ohci-platform ohci-platform.0: Generic Platform OHCI Controller
[   38.113949] ohci-platform ohci-platform.0: new USB bus registered, assigned bus number 2
[   38.122095] ohci-platform ohci-platform.0: irq 212, io mem 0x09a03c00
[   38.192689] hub 2-0:1.0: USB hub found
[   38.196448] hub 2-0:1.0: 1 port detected
[   38.232618] st-pinctrl 922f080.pin-controller-rear: maps: function usb3 group usb3-2 num 3
[   38.241001] usb-st-dwc3 8f94000.dwc3: glue-logic addr 0x9da4c000, syscfg-reg offset 0x110
[   38.250435] dwc3 9900000.dwc3: unable to find phy
[   38.256838] sti-usb3-phy 8f90000.usb3_phy: MiPHY28LP setup
[   38.262363] sti-usb3-phy 8f90000.usb3_phy: MiPHY28LP release 0x231 found
[   38.269671] sti-usb3-phy 8f90000.usb3_phy: USB3 MIPHY28LP timer initialized
[   38.276625] stih407-usb-genphy 100.usbpicophy: Generic picoPHY usb port init.
[   38.483637] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   38.489162] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[   38.497495] xhci-hcd xhci-hcd.0.auto: irq 187, io mem 0x09900000
[   38.503949] xHCI xhci_add_endpoint called for root hub
[   38.503956] xHCI xhci_check_bandwidth called for root hub
[   38.504213] hub 3-0:1.0: USB hub found
[   38.508009] hub 3-0:1.0: 1 port detected
[   38.512064] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   38.517551] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[   38.527373] xHCI xhci_add_endpoint called for root hub
[   38.527383] xHCI xhci_check_bandwidth called for root hub
[   38.527815] hub 4-0:1.0: USB hub found
[   38.531622] hub 4-0:1.0: 1 port detected
[   38.535752] usb-st-dwc3 8f94000.dwc3: configured as host DRD
[   38.541537] usb-st-dwc3 8f94000.dwc3: probe exits fine...
[   38.611774] ds216play_synobios: module license 'Synology Inc.' taints kernel.
[   38.619687] Disabling lock debugging due to kernel taint
[   38.626304] correction with 0x00
[   38.627448] 2021-2-21 12:56:55 UTC
[   38.627456] synobios: load, major number 201
[   38.631814] Brand: Synology
[   38.631823] Model: DS-216play
[   38.631830] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   38.631849] synobios cpu_arch proc entry initialized
[   38.636804] synobios crypto_hw proc entry initialized
[   38.641861] synobios syno_platform proc entry initialized
[   38.647482] synobios open /dev/ttyS1 success
[   38.665692] synobios: unload
[   38.686541] md: Autodetecting RAID arrays.
[   38.762967] md: invalid raid superblock magic on sda3
[   38.768024] md: sda3 does not have a valid v0.90 superblock, not importing!
[   38.848716] md: invalid raid superblock magic on sdb3
[   38.853756] md: sdb3 does not have a valid v0.90 superblock, not importing!
[   38.860723] md: Scanned 6 and added 4 devices.
[   38.865150] md: autorun ...
[   38.867942] md: considering sda1 ...
[   38.871511] md:  adding sda1 ...
[   38.874728] md: sda2 has different UUID to sda1
[   38.879264] md:  adding sdb1 ...
[   38.882481] md: sdb2 has different UUID to sda1
[   38.887011] md: created md0
[   38.889801] md: bind<sdb1>
[   38.892525] md: bind<sda1>
[   38.895237] md: running: <sda1><sdb1>
[   38.899233] md/raid1:md0: active with 2 out of 2 mirrors
[   38.941954] md0: detected capacity change from 0 to 2549940224
[   38.948005] md: considering sda2 ...
[   38.951590] md:  adding sda2 ...
[   38.954826] md:  adding sdb2 ...
[   38.960626] md: created md1
[   38.963418] md: bind<sdb2>
[   38.966155] md: bind<sda2>
[   38.968910] md: running: <sda2><sdb2>
[   38.974824] md/raid1:md1: active with 2 out of 2 mirrors
[   38.993217] md1: detected capacity change from 0 to 2147418112
[   38.999492] md: ... autorun DONE.
[   39.052492]  md0: unknown partition table
[   41.137975] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[   41.158071] usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[   42.923104] EXT4-fs (md0): barriers disabled
[   42.931480] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[   45.426408] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[   46.887183] EXT4-fs (md0): re-mounted. Opts: (null)
[   54.321934] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   54.327376] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   54.898521]  md1: unknown partition table
[   55.011781] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
[   59.126518] NET: Registered protocol family 10
[   59.185716] sit: IPv6 over IPv4 tunneling driver
[   59.906695] init: syno-auth-check main process (2845) killed by TERM signal
[   61.176390] systemd-udevd[3149]: starting version 204
[   61.238025] fuse init (API version 7.22)
[   61.551940] Loading modules backported from Linux version v3.18.1-0-g39ca484
[   61.559025] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[   62.521234] exFAT: Version 1.2.9
[   63.491965] correction with 0x00
[   63.494880] 2021-2-21 12:57:20 UTC
[   63.494891] synobios: load, major number 201
[   63.499199] Brand: Synology
[   63.499210] Model: DS-216play
[   63.499217] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[   63.499241] synobios cpu_arch proc entry initialized
[   63.504194] synobios crypto_hw proc entry initialized
[   63.509264] synobios syno_platform proc entry initialized
[   63.514925] synobios open /dev/ttyS1 success
[   66.414469] dwmac1000: Master AXI performs any burst length
[   66.420419] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   67.646911] init: dhcp-client (eth0) main process (4832) killed by TERM signal
[   69.373729] md: md3 stopped.
[   69.382978] md: bind<sdb3>
[   69.408126] md/raid1:md3: active with 1 out of 1 mirrors
[   69.423831] md3: detected capacity change from 0 to 3995849261056
[   69.438618]  md3: unknown partition table
[   69.444487] md: md2 stopped.
[   69.450102] md: bind<sda3>
[   69.498012] md/raid1:md2: active with 1 out of 1 mirrors
[   69.508026] md2: detected capacity change from 0 to 2995655213056
[   69.523342]  md2: unknown partition table
[   71.408156] libphy: stmmac-0:01 - Link is Up - 1000/Full
[   71.414181] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   71.616859] EXT4-fs (md2): barriers disabled
[   71.628350] EXT4-fs (md3): barriers disabled
[   71.711919] EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[   71.735110] EXT4-fs (md3): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[   72.660908] ip_tables: (C) 2000-2006 Netfilter Core Team
[   72.794970] nf_conntrack version 0.5.0 (6470 buckets, 25880 max)
[   73.278296] init: dhcp-client (eth0) main process (5021) killed by TERM signal
[   74.665164] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   79.882602] usbcore: registered new interface driver usb-storage
[   80.081146] usbcore: registered new interface driver usblp
[   80.423098] usbcore: registered new interface driver usbhid
[   80.428713] usbhid: USB HID core driver
[   89.321234] ICS Version 1.0.2 : Final (05:23:11 May 12 2020)
[   89.321245] ICS init 1 debug_flags 0x4ffffffff debug_chan 0x1 connect 0 watchdog 0 bpa2_part 'multicom'
[   89.321249] stih41x_configure_clocks_ics() : start
[   89.321255] clock lock 9b00a354
[   89.321267] clk : clk_00 9b824580 taken
[   89.321273] clk : clk_01 9b824600 taken
[   89.321280] clk : clk_02 9b824500 taken
[   89.321287] clk : clk_03 9b824500 taken
[   89.321298] prepare all clocks
[   89.321305] stih41x_configure_clocks_ics() : exit
[   89.321318] ICS loading firmware 'vid_firmware-mpeg4p2-stih407.elf' cpu 2 (video)
[   89.373194] ICS starting cpu 2 (video) entry 0x41c00400
[   89.373208] enable clock 1
[   89.373221] ICS loading firmware 'audio_firmware-profile0-stih407.elf' cpu 3 (audio)
[   89.397471] ICS starting cpu 3 (audio) entry 0x40c00c00
[   89.397482] enable clock 2
[   89.397494] ICS loading firmware 'audio_firmware-profile0-stih407.audio1.elf' cpu 1 (gp1)
[   89.419416] ICS starting cpu 1 (gp1) entry 0x41400c00
[   89.419426] enable clock 0
[   89.419438] ICS loading firmware 'security_firmware-stih410.elf' cpu 4 (gp0)
[   89.441413] ICS starting cpu 4 (gp0) entry 0x40400300
[   89.441424] enable clock 3
[   89.441434] ICS: Using BPA2 partition 'multicom'
[   89.441440] Test: ICS_GetTuneable(ICS_TUNEABLE_ADMIN_THREAD_PRIORITY) = -90 Calling ICS_cpu_init(0, 0x1f, 0x0)
[   89.441452] insmod:ics_cpu_init:346 cpuNum 0 cpuMask 0x1f flags 0x0
[   89.441557] insmod:ics_cpu_init:384 cpu 0 ('host') cpuMask 0x1f ics_state 9b282000
[   89.442807] insmod:ics_cpu_init:550 Memory usage : allocated 0 OS used 0 (+0) avail 0
[   89.442816] ICS Adding region[0] 0x60000000 0x800000 cacheflag=0x1
[   89.448139] ICS debug: 9b386e00 in module_dir
[   89.586230] ata1.00: configured for UDMA/133
[   89.590514] ata1: EH complete
[   89.648909] MME Version 4.4.1 Final (05:23:20 May 12 2020)
[   89.648920] MME module init=1 debug_flags=0x1 pool_size=262144
[   89.654760] insmod:mme_init:373 Succeeded on cpu 0 mme_state 96a0fc00
[   89.654770] insmod:mme_init:377 Memory usage : OS used 0 (+0) avail 0
[   89.729333] Load module infra_main [?]               by insmod (pid 7532)
[   89.937860] ata2.00: configured for UDMA/133
[   89.942190] ata2: EH complete
[   90.049488] Load module stm_event_main [?]           by insmod (pid 7578)
[   90.551240] stm-ce cesc.54: Enabling clock stfe_ccsc
[   90.556211] stm-ce cesc.54: Clock stfe_ccsc @ 225000068Hz
[   90.561646] stm-ce cesc.54: Enabling clock CLK_TP
[   90.566357] stm-ce cesc.54: Clock CLK_TP @ 400000000Hz
[   90.572438] stm-ce cesc.54: Disabling clock stfe_ccsc
[   90.577499] stm-ce cesc.54: Disabling clock CLK_TP
[   90.629748] st_relay_core_open done ok 786432x10
[   90.714572] st_relayfs_open done ok
[   90.789673] Init of MME log wrapper
[   90.793157] acc_mme_loginit done ok
[   90.959039] bdispII_device_features.c:409: BDisp/BLT: blitter is a 'STiH407' (15)
[   90.998055] bdispII.c:183: AQ(bdisp-aq2) not found
[   91.002848] bdispII.c:183: AQ(bdisp-aq3) not found
[   91.007634] bdispII.c:183: AQ(bdisp-aq4) not found
[   91.012651] bdispII_device_features.c:409: BDisp/BLT: blitter is a 'STiH407' (15)
[   91.050806] bdispII.c:183: AQ(bdisp-aq2) not found
[   91.055598] bdispII.c:183: AQ(bdisp-aq3) not found
[   91.060429] bdispII.c:183: AQ(bdisp-aq4) not found
[   91.096737] Loading os wrapper module...
[   91.132403] Loading stmfe utility module ...
[   91.414759] Loading module stm_fe ...
[   91.418708] st-pinctrl 920f080.pin-controller-front0: maps: function tsin0 group tsin0_serial num 6
[   91.427826] stm_demod_get_pdata: No syscfg phandle specified
[   91.433613] demod_config_pdata: demod config not set properly
[   91.439470] st-pinctrl 920f080.pin-controller-front0: maps: function tsin4 group tsin4_serial_alt3 num 6
[   91.449142] stm_demod_get_pdata: ts mapping control syscfg update ok
[   91.455553] demod_config_pdata: demod config not set properly
[   91.461443] st-pinctrl 920f080.pin-controller-front0: maps: function tsin3 group tsin3_serial num 6
[   91.470623] stm_demod_get_pdata: No syscfg phandle specified
[   91.476375] demod_config_pdata: demod config not set properly
[   91.482634] stm_lnb_get_pdata: lnb config not properly set
[   91.488235] stm_lnb_get_pdata: lnb config not properly set
[   91.494120] stm_fe_diseqc_probe: Config diseqc stm_fe_diseqc.0
[   91.500301] stm_fe_diseqc_probe: Config diseqc stm_fe_diseqc.1
[   91.506628] stm_fe_ip_probe: Configuring ip stm_fe_ip.0
[   91.511943] stm_fe_ip_probe: Configuring ip stm_fe_ip.1
[   91.517226] stm_fe_ip_probe: Configuring ip stm_fe_ip.2
[   91.522556] stm_fe_ip_probe: Configuring ip stm_fe_ip.3
[   91.527844] stm_fe_ip_probe: Configuring ip stm_fe_ip.4
[   91.533162] stm_fe_ip_probe: Configuring ip stm_fe_ip.5
[   92.014043] st-fdma 8e20000.fdma-mpe: Requesting firmware: fdma_STiH407_0.elf
[   92.041478] st-fdma 8e20000.fdma-mpe: SLIM hw 0.134413, FDMA fw 1.0
[   92.048665] platform denc.fw: requesting frm: 'denc.fw', 7f348910/971f550c
[   92.055543] platform denc.fw: using denc_H407_b2120.fw for denc.fw firmware
[   92.073904] platform denc.fw: loading firmware data.
[   92.078889] platform denc.fw: firmware data is loaded (size=40).
[   92.084932] platform denc.fw: frm 'denc.fw' successfully loaded
[   92.091017] platform hdf.fw: requesting frm: 'hdf.fw', 7f348910/971f574c
[   92.097709] platform hdf.fw: using hdf_H407_b2120.fw for hdf.fw firmware
[   92.113778] platform hdf.fw: loading firmware data.
[   92.118670] platform hdf.fw: firmware data is loaded (size=264).
[   92.124710] platform hdf.fw: frm 'hdf.fw' successfully loaded
[   92.140958]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[   92.148083]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[   92.155464]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[   92.162670]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[   92.170283]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[   92.177841]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[   92.185105]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[   92.192242]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[   92.201814]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[   92.208947]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[   92.216340]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[   92.223560]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[   92.701222] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.701419] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.701608] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.701805] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.701990] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.702186] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = 0
[   92.702393] stm_display_plane_is_feature_applicable V4L2_CID_STM_IQI_EXT_PEAKING_PRESET = -95
[   92.702503] stmvout_probe_media_planes: Display 0  found 7 planes (skipped 0)
[   92.709750] stmvout_probe_media_outputs: Display 0: 4 output Plug added
[   92.817995]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[   92.825133]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[   92.832517]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[   92.839724]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[   94.652929] SE-Aud-CtoP pol:2 prio:58
[   94.656588] SE-Aud-PtoD pol:2 prio:58
[   94.660288] SE-Aud-DtoM pol:2 prio:60
[   94.663944] SE-Aud-MPost pol:2 prio:62
[   94.667685] SE-Vid-CtoP pol:2 prio:58
[   94.671369] SE-Vid-PtoD pol:2 prio:58
[   94.675021] SE-Vid-DtoM pol:2 prio:60
[   94.678699] SE-Vid-MPost pol:2 prio:62
[   94.682446] SE-Vid-H264Int pol:2 prio:59
[   94.686366] SE-Vid-HevcInt pol:2 prio:59
[   94.690304] SE-Aud-Reader pol:2 prio:64
[   94.694139] SE-Aud-StreamT pol:2 prio:59
[   94.698070] SE-Aud-Mixer pol:2 prio:64
[   94.701812] SE-Aud-BcstMix pol:2 prio:64
[   94.705731] SE-Aud-Bypass pol:2 prio:64
[   94.709581] SE-Man-Coord pol:2 prio:59
[   94.713326] SE-Man-BrSrcGrab pol:2 prio:50
[   94.717416] SE-Man-BrCapture pol:2 prio:50
[   94.721531] SE-Man-DsVideo pol:2 prio:74
[   94.725448] SE-Playbck-Drain pol:2 prio:64
[   94.729563] SE-EncAud-ItoP pol:2 prio:61
[   94.733483] SE-EncAud-PtoC pol:2 prio:58
[   94.737400] SE-EncAud-CtoO pol:2 prio:59
[   94.741351] SE-EncVid-ItoP pol:2 prio:61
[   94.745270] SE-EncVid-PtoC pol:2 prio:58
[   94.749217] SE-EncVid-CtoO pol:2 prio:59
[   94.753136] SE-Encod-Coord pol:2 prio:61
[   94.757053] SE-Other pol:2 prio:50
[   94.762046] player2 probe done ok
[   94.765658] [sched_delayed] sched: RT throttling activated
[   94.920714] stm_te_tsmux_mme.te_tsmux_mme_init_module() - Load module te_tsmux_mme by insmod (pid 8152)
[   99.103593] stm_te_hal.stpti_tp_probe() - Probed 8880000.tetp device
[   99.110136] stm_te_hal.stpti_tp_probe() - Caching firmware pti_tp3.elf
[   99.152550] stm_te_hal.stptiHAL_pDeviceInit() - Clocks Per Second = 100.
[   99.159295] stm-tango-tp 8880000.tetp: Resource tp [0x8880000:0x88aefff]
[   99.166003] stm_te_hal.stptiHAL_pDeviceInit() - TANGO TP mapped... [ 08880000 => 9f040000 ]
[   99.174382] stm-tango-tp 8880000.tetp: Enabling clock CLK_TP
[   99.180087] stm-tango-tp 8880000.tetp: Clock CLK_TP @ 400000000Hz
[   99.186217] stm-tango-tp 8880000.tetp: IRQ 57
[   99.190632] stm_te_hal.stptiHAL_pDeviceInit() - TP ISR installed on number 0x00000039.
[   99.198590] stm-tango-tp 8880000.tetp: Loading firmware: pti_tp3.elf
[   99.205181] stm-tango-tp 8880000.tetp: Loading segment 0 0x00000000 (0x1a8 bytes) -> 0x9f040000 (0x11b0 bytes)
[   99.215576] stm-tango-tp 8880000.tetp: Loading segment 1 0x000011b0 (0xe4f8 bytes) -> 0x9f0411b0 (0xe528 bytes)
[   99.235279] stm-tango-tp 8880000.tetp: Loading segment 2 0x00400000 (0x9f38 bytes) -> 0x9f050000 (0x9f38 bytes)
[   99.252033] stm_te_hal.stptiHAL_pDeviceInit() - TP Firmware loaded successfully
[   99.259366] stm_te_hal.stptiHAL_pDeviceInit() - Started TP from reset (waiting for Ready)
[   99.267612] stm_te_hal.stptiHAL_TPInterruptHandler() - STxP70_TP0 : Starting 01022501_TP_VERSION [CS00029AA8] Built 10:08:55 Sep  4 2014
[   99.279928] stm_te_hal.stptiHAL_pDeviceSetInitialisationParameters() - Assuming STTKD driver in system.
[   99.289654] stm_te_hal.stptiHAL_TPInterruptHandler() - STxP70_TP0 : Total Usage 39688 of 44032 bytes.
[   99.298978] stm_te_hal.stptiHAL_TPInterruptHandler() - STxP70_TP0 : Configuring Timer Counter for packet timestamps. Divider 0xB

[   99.327967] stm_te_hal.stptiHAL_pDeviceInit() - TP (device0) Started Successfully.
[   99.335619] stm_te_hal.stptiHAL_pDeviceInit() - Across 8 vDevices, there are 256 slots, 96 buffers, 32 indexers, 256 hw section filters.
[   99.350613] stm_te_hal.stptiHAL_pDeviceSleep() - TP sleeping (device0)
[   99.357156] stm-tango-tp 8880000.tetp: Disabling clock CLK_TP
[   99.388440] stm_te_hal.stpti_stfe_probe() - Probed 8a20000.tefe device
[   99.395294] stm_te_hal.stpti_stfe_probe() - Caching firmware pti_memdma_h407.elf
[   99.403913] stm_te_hal.stptiHAL_EventTask() - Entering Event Task for 1ff07fff
[   99.451430] stm_te_hal.tango_idle() - pDevice idle
[   99.456573] stm_te_hal.tango_suspend() - pDevice 0 suspended
[   99.462316] stm-tango-tp 8880000.tetp: Enabling clock CLK_TP
[   99.468313] stm-tango-tp 8880000.tetp: Clock CLK_TP @ 400000000Hz
[   99.474615] stm_te_hal.stptiHAL_pDeviceWakeup() - TP woken up (device0)
[   99.481346] stm_te_hal.stptiHAL_pDevicePowerdown() - TP held in reset (device0)
[   99.488852] stm_te_hal.stptiHAL_pDevicePowerdown() - Saving TP shared memory (device0)
[   99.500191] stm_te_hal.stptiHAL_pDevicePowerdown() - TP powered down (device0)
[   99.507459] stm-tango-tp 8880000.tetp: Disabling clock CLK_TP
[   99.513248] stm_te_hal.tango_suspend() - pDevice 0 frozen
[   99.590318] stm_te_hal.stptiTSHAL_Init() - Initialising STFE device 8a20000.tefe

[   99.599285] stm-tango-stfe 8a20000.tefe: Resource stfe [0x8a20000:0x8a2ffff]
[   99.606398] stm-tango-stfe 8a20000.tefe: Resource stfe-ram [0x8a00000:0x8a03fff]
[   99.613893] stm-tango-stfe 8a20000.tefe: Idle IRQ 67
[   99.618932] stm-tango-stfe 8a20000.tefe: error IRQ 66
[   99.624006] stm-tango-stfe 8a20000.tefe: Enabling clock stfe_ccsc
[   99.630167] stm-tango-stfe 8a20000.tefe: Clock stfe_ccsc @ 225000068Hz
[   99.636726] stm-tango-stfe 8a20000.tefe: Enabling clock stfe_frc-0
[   99.643023] stm-tango-stfe 8a20000.tefe: Setting clock stfe_frc-0 to 27000000Hz
[   99.650581] stm-tango-stfe 8a20000.tefe: Clock stfe_frc-0 @ 27000001Hz
[   99.657321] stm-tango-stfe 8a20000.tefe: Loading firmware: pti_memdma_h407.elf
[   99.665362] stm-tango-stfe 8a20000.tefe: Loading IMEM segment 0 0x00000000 (0x39f bytes) -> 0x9dcb8000 (0x4d4 bytes)
[   99.676248] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 1 0x00000020 (0x5c bytes) -> 0x9daae080 (0x5c bytes)
[   99.686670] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 2 0x00000037 (0x0 bytes) -> 0x9daae0dc (0xc0 bytes)
[   99.697044] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 3 0x00000010 (0x14 bytes) -> 0x9daae040 (0x14 bytes)
[   99.707478] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 4 0x00000000 (0x18 bytes) -> 0x9daae000 (0x18 bytes)
[   99.717938] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 5 0x000000a0 (0x2e0 bytes) -> 0x9daae280 (0x2e0 bytes)
[   99.728593] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 6 0x00000080 (0x5c bytes) -> 0x9daae200 (0x5c bytes)
[   99.739022] stm-tango-stfe 8a20000.tefe: Loading DMEM segment 7 0x00000160 (0x200 bytes) -> 0x9daae580 (0x200 bytes)
[   99.749710] stm_te_hal.stptiTSHAL_Stfev2_CreateConfig() - THIS IS THE RIGHT MEMDMA FW
[   99.757600] stm_te_hal.stptiTSHAL_Stfev2_CreateConfig() - THERE ARE 23 MEMDMA CH and 1 TP
[   99.766103] stm_te_hal.stptiTSHAL_Stfev2_MemdmaInit() - MEMDMA ISR installed on number 0x00000043.
[   99.775204] stm_te_hal.stptiTSHAL_Stfev2_SystemInit() - ERROR TSIN ISR error installed on number 0x00000042.
[   99.788916] stm_te_hal.stfe_idle() - stfe idle
[   99.793553] stm_te_hal.stptiTSHAL_Stfev2_SystemTerm() - ERROR TSIN ISR error uninstalled on number 0x00000042.
[   99.803693] stm_te_hal.stptiTSHAL_Stfev2_MemdmaTerm() - MEMDMA ISR uninstalled on number 0x00000043.
[   99.812973] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_ccsc
[   99.819246] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_tsout-0
[   99.825769] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_tsout-1
[   99.832368] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_frc-0
[   99.838768] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_frc-1
[   99.845118] stm-tango-stfe 8a20000.tefe: Disabling clock stfe_mchi
[   99.851378] stm_te_hal.stfe_suspend() - Suspend TSInput 0
[   99.856951] stm_te_hal.stfe_suspend() - Powered-down TSInput -1
[  100.475889] Loading sat tuner wrapper module ...
[  100.591788] Loading VGLNA module ...
[  100.702806] Loading t/c tuner wrapper module ...
[  100.812265] Loading FE IP driver module...
[  101.027697] Loading stv4100 tuner module...
[  101.177785] Loading stv0367 driver module...
[  101.259298] Loading stv6120 tuner module ...
[  101.317191] Loading stv0910 driver module...
[  101.937330] Loading module ctrl_via_stm_fe = -1
[  101.941897] stm_fe_discover: Discovered stm_fe_diseqc.0 ...
[  101.947470] stm_fe_discover: Discovered stm_fe_diseqc.1 ...
[  101.953095] stm_fe_discover: Discovered stm_fe_ip.0 ...
[  101.958343] stm_fe_discover: Discovered stm_fe_ip.1 ...
[  101.963565] stm_fe_discover: Discovered stm_fe_ip.2 ...
[  101.968805] stm_fe_discover: Discovered stm_fe_ip.3 ...
[  101.974058] stm_fe_discover: Discovered stm_fe_ip.4 ...
[  101.979307] stm_fe_discover: Discovered stm_fe_ip.5 ...
[  101.984529] 8 stm_fe objects discovered
[  101.988381] DVB: registering new adapter (ST DVB frontend driver)
[  101.994782] demod_config_pdata: demod config not set properly
[  102.000714] demod_config_pdata: demod config not set properly
[  102.006639] demod_config_pdata: demod config not set properly
[  102.012835] stm_dvb_get_lnb_pdata: lnb config not properly set
[  102.018815] stm_dvb_get_lnb_pdata: lnb config not properly set
[  102.025035] stm_dvb_diseqc_attach() Invalid demod object, cannot attach diseqc
[  102.032452] stm_dvb_diseqc_attach() Invalid demod object, cannot attach diseqc
[  102.040353] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.37
[  102.046419] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.40
[  102.054138] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.43
[  102.065901] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.46
[  102.098652] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.49
[  102.115678] Configuring ip IPFE-STM_FE IP name stm-dvb-ip.52
[  102.182761] Created stm_fe_ip.0          for parent stm_fe_ip.0
[  102.208118] Created stm_fe_ip.1          for parent stm_fe_ip.1
[  102.216643] Created stm_fe_ip.2          for parent stm_fe_ip.2
[  102.223629] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(001132543e37).
[  102.232887] Created stm_fe_ip.3          for parent stm_fe_ip.3
[  102.258026] Created stm_fe_ip.4          for parent stm_fe_ip.4
[  102.264929] Created stm_fe_ip.5          for parent stm_fe_ip.5
[  102.272416] Found 8 demuxes, 256 pid filters, 96 output filters
[  102.281517] Added device stm_dvb_demux.0
[  102.287365] Added device stm_dvb_demux.1
[  102.302093] Added device stm_dvb_demux.2
[  102.311189] Added device stm_dvb_demux.3
[  102.330188] Added device stm_dvb_demux.4
[  102.337943] Added device stm_dvb_demux.5
[  102.347541] Added device stm_dvb_demux.6
[  102.357279] Added device stm_dvb_demux.7
[  102.544779] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[  102.598127] HevcppProbe SE-Vid-Hevcpp pol:2 prio:50
[  102.603120] HevcppProbe hw core nb: 1
[  102.606970] ret value : 0x0 max frequency value : 240000000
[  102.613006] OSDEV_LinkDevice /dev/hevcpp - Major 247, Minor 0
[  102.619127] Hevcpp probe done ok
[  103.284461] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[  103.296602] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[  103.377405] compo_capture_subdev_init(): created disabled links to video plane
[  103.384694] compo_capture_subdev_init(): created disabled links to gfx plane
[  103.392034] compo_capture_subdev_init(): created disabled links to output
[  103.514358] OSDEV_LinkDevice /dev/allocator - Major 245, Minor 0
[  103.520407] AllocatorLoadModule done ok
[  103.569895] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled.
[  103.578196] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled.
[  103.603399] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[  103.612524] iSCSI:target_core_ep.c:786:ep_attach_hba RODSP plugin for epio is enabled.
[  103.620457] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled.
[  103.628821] h264encoder 8c85000.h264encoder: Hva registers base address is 0x8c85000 and size is 0xfff
[  103.638228] h264encoder 8c85000.h264encoder: Hva esram base address is 0x6000000 and size is 0x3ffff
[  103.647590] h264encoder 8c85000.h264encoder: Hva interrupt number is 90
[  103.654862] h264encoder 8c85000.h264encoder: Hva error interrupt number is 91
[  103.662233] h264encoder 8c85000.h264encoder: Hva clock set to 300000000
[  103.668892] h264encoder 8c85000.h264encoder: Hva version is 0x400
[  103.676027] h264encoder 8c85000.h264encoder: (StreamId:0x0) Unable to soft-reset hva => reset platform
[  103.686329] h264encoder 8c85000.h264encoder: (StreamId:0x0) Incorrect stbus plug configuration, StBusPlugConfig = 0x0
[  103.696940] h264encoder 8c85000.h264encoder: (StreamId:0x0) Force stbus plug configuration to recommended value, StBusPlugConfig = 0x408081
[  103.710406] h264encoder 8c85000.h264encoder: (StreamId:0x0) Reset hva and configure registers done
[  103.720583] h264encoder 8c85000.h264encoder: Setting hva max instance number to 30
[  103.729614] h264encoder 8c85000.h264encoder: H264 encode hardware host transformer probe done ok
[  103.946247] H264ppProbe SE-Vid-H264pp pol:2 prio:50
[  103.951169] H264pp: hw core nb: 1
[  103.954500] ret value : 0x0 max frequency value : 266250000
[  103.960166] OSDEV_LinkDevice /dev/h264pp - Major 246, Minor 0
[  103.965907] h264pp probe done ok
[  104.046836] HadesProbe: Probing device with DT
[  104.051352] For CLK_HWPE_HADES ret value : 0x0 max frequency value : 400000000
[  104.058620] For CLK_FC_HADES ret value : 0x0 max frequency value : 332999958
[  104.147791] HadesPmRuntime: Resume ..
[  104.151543] STHORM: library initialization(regs 0a010000(7274496), IRQ 107, partition hades-l3
[  104.160748] RAB SLAVE: CONF_FC: source 0a100000 (00100000) dest 50000000 size 00080000
[  104.168864] RAB SLAVE: CL_PERIPH: source 0a200000 (00200000) dest 20000000 size 00080000
[  104.177467] RAB SLAVE: CONF_ENCMEM: source 0a280000 (00280000) dest 10000000 size 00040000
[  104.185863] RAB SLAVE: CL_HWPE_OUT: source 0a2f0000 (002f0000) dest 30000000 size 00008000
[  104.194201] RAB SLAVE: CL_HWPE_OUT: source 0a2f8000 (002f8000) dest 30000000 size 00008000
[  104.202488] LoadHadesDevice: Hades API initialized with registers base 0a000000, IRQ base 107, BPA2 partition hades-l3
[  104.224397] STHORM: firmware program segments loaded at 40a00000 (2097152 bytes)
[  104.232074] HADES_API: Configuring runtime struct @ 0a100000
[  104.237722] HADES_API: Specified cluster mask: 0x80000001 for 1 clusters
[  104.244528] HADES_API: Booting fabric controller (id=4) @ 0xa119000
[  104.250804] HADES_API: Waiting for boot message from FC ..
[  104.256430] HADES_API: ... FC has booted
[  104.260462] HADES_API: Sending first config message to FC, mailbox @ 0a118000
[  104.267582] HADES_API: P2012 library initialization done
[  104.272897] LoadHadesDevice: HADES FW name: hades_fw.bin, size: 1247176
[  104.279547] HADES_API: Configuring static binary
[  104.284158] HADES_API: HADES_InitTransformer: PedfRT_Descr_p(99308e00) ->binary.size: 1247176 clusterId: 0x1f
[  104.294128] HADES_API: HADES_InitTransformer -> pedf_rt (p:0x62430000 v:0x9da22000 size:4)
[  104.305550] HadesPmRuntime: Suspend ..
[  104.309470] CRCDriver: major 246, minor 0 to 19
[  104.314101] Hades HEVC host transformer probe done ok
[  104.572602] stm-c8jpg 8c84000.c8jpg: found c8jpg device at: 0x08c84000, irq: 88
[  104.580331] stm-c8jpg 8c84000.c8jpg: decoder successfully probed
[  104.643474] Maximum vp8 clock frequency not retrieved from DT
[  104.649359] hx170_check_chip_id: Chip ID: 0x67315058
[  104.654635] VP8 hardware host transformer probe done ok
[  104.838009]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_HDMI
[  104.845146]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_REF_HDMIPHY
[  104.852541]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_TMDS_HDMI
[  104.859763]  stm-ios: vibe_os_clk_disable: Clock already disable CLK_PIX_MAIN_DISP
[  107.179135] warning: `nginx' uses 32-bit capabilities (legacy support in use)
[  107.411436] loop: module loaded
[  110.868369] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[  116.115195] r8152: module verification failed: signature and/or required key missing - tainting kernel
[  116.126701] usbcore: registered new interface driver r8152
[  116.349391] usb 4-1: reset SuperSpeed USB device number 2 using xhci-hcd
[  116.378181] usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[  116.390757] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c00
[  116.399591] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c2c
[  116.408862] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c58
[  116.518656] netif_napi_add() called with weight 256 on device eth%d
[  116.557933] r8152 4-1:1.0 eth1: v2.14.0 (2020/09/24)
[  116.563017] r8152 4-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[  121.091736] init: nmbd main process (11284) killed by TERM signal
[  122.308443] ifconfig: page allocation failure: order:4, mode:0x40d0
[  122.314739] CPU: 1 PID: 12031 Comm: ifconfig Tainted: PF          O 3.10.105 #25426
[  122.314769] [<80015320>] (unwind_backtrace+0x0/0xec) from [<8001193c>] (show_stack+0x10/0x14)
[  122.314784] [<8001193c>] (show_stack+0x10/0x14) from [<800920f8>] (warn_alloc_failed+0xe4/0x11c)
[  122.314795] [<800920f8>] (warn_alloc_failed+0xe4/0x11c) from [<8009443c>] (__alloc_pages_nodemask+0x514/0x7a4)
[  122.314817] [<8009443c>] (__alloc_pages_nodemask+0x514/0x7a4) from [<7fc72a34>] (alloc_rx_agg+0x58/0x150 [r8152])
[  122.314892] [<7fc72a34>] (alloc_rx_agg+0x58/0x150 [r8152]) from [<7fc72bac>] (alloc_all_mem+0x80/0x208 [r8152])
[  122.314908] [<7fc72bac>] (alloc_all_mem+0x80/0x208 [r8152]) from [<7fc75278>] (rtl8152_open+0x38/0x230 [r8152])
[  122.314927] [<7fc75278>] (rtl8152_open+0x38/0x230 [r8152]) from [<8040e214>] (__dev_open+0x98/0xf8)
[  122.314937] [<8040e214>] (__dev_open+0x98/0xf8) from [<8040e454>] (__dev_change_flags+0x94/0x128)
[  122.314946] [<8040e454>] (__dev_change_flags+0x94/0x128) from [<8040e554>] (dev_change_flags+0x10/0x48)
[  122.314960] [<8040e554>] (dev_change_flags+0x10/0x48) from [<80464ef4>] (devinet_ioctl+0x65c/0x734)
[  122.314971] [<80464ef4>] (devinet_ioctl+0x65c/0x734) from [<803f868c>] (sock_ioctl+0x1c8/0x29c)
[  122.314984] [<803f868c>] (sock_ioctl+0x1c8/0x29c) from [<800dfbf0>] (do_vfs_ioctl+0x4b4/0xaa8)
[  122.314994] [<800dfbf0>] (do_vfs_ioctl+0x4b4/0xaa8) from [<800e0254>] (SyS_ioctl+0x70/0x80)
[  122.315004] [<800e0254>] (SyS_ioctl+0x70/0x80) from [<8000db40>] (ret_fast_syscall+0x0/0x38)
[  122.315009] Mem-info:
[  122.315013] Normal per-cpu:
[  122.315018] CPU    0: hi:  186, btch:  31 usd:  55
[  122.315023] CPU    1: hi:  186, btch:  31 usd:   0
[  122.315033] active_anon:19390 inactive_anon:19721 isolated_anon:0
                active_file:14336 inactive_file:14498 isolated_file:0
                unevictable:882 dirty:4329 writeback:423 unstable:0
                free:6833 slab_reclaimable:4878 slab_unreclaimable:5943
                mapped:14097 shmem:6623 pagetables:1887 bounce:0
                free_cma:3675
[  122.315052] Normal free:27332kB min:8192kB low:10240kB high:12288kB active_anon:77560kB inactive_anon:78884kB active_file:57344kB inactive_file:57992kB unevictable:3528kB isolated(anon):0kB isolated(file):0kB present:475136kB managed:393560kB mlocked:3528kB dirty:17316kB writeback:1692kB mapped:56388kB shmem:26492kB slab_reclaimable:19512kB slab_unreclaimable:23772kB kernel_stack:2720kB pagetables:7548kB unstable:0kB bounce:0kB free_cma:14700kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[  122.315057] lowmem_reserve[]: 0 0
[  122.315063] Normal: 581*4kB (UEMC) 581*8kB (UEMRC) 471*16kB (UEMRC) 81*32kB (MC) 44*64kB (C) 32*128kB (C) 9*256kB (C) 0*512kB 1*1024kB (C) 0*2048kB 0*4096kB = 27340kB
[  122.315090] 35488 total pagecache pages
[  122.315096] 0 pages in swap cache
[  122.315100] Swap cache stats: add 165, delete 165, find 0/0
[  122.315103] Free swap  = 2096424kB
[  122.315106] Total swap = 2097084kB
[  122.321655] 118784 pages of RAM
[  122.321665] 7812 free pages
[  122.321668] 15262 reserved pages
[  122.321671] 7162 slab pages
[  122.321674] 378458 pages shared
[  122.321677] 0 pages swap cached
[  128.194666] init: synoscheduler-vmtouch main process (2261) killed by TERM signal
[  131.840899] init: nmbd main process (12989) killed by TERM signal
[  134.962472] init: synoscheduler-vmtouch main process (12832) killed by TERM signal
[  143.130688] usbcore: registered new interface driver snd-usb-audio
[  143.282895] usbcore: registered new interface driver snd-usb-hiface
[  145.061764] init: synoscheduler-vmtouch main process (13967) killed by TERM signal
[  147.046145] init: synoscheduler-vmtouch main process (16367) killed by TERM signal
[  149.538255] PPP generic driver version 2.4.2
[  149.808924] NET: Registered protocol family 24
[  150.287803] PPP MPPE Compression module registered
[  150.635295] PPP BSD Compression module registered
[  150.776620] PPP Deflate Compression module registered
[  150.851537] l2tp_core: L2TP core driver, V2.0
[  151.708058] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[  151.864101] Initializing XFRM netlink socket
[  151.939440] NET: Registered protocol family 15
[  163.159043] init: nmbd main process (14061) killed by KILL signal
[  293.848188] usbcore: deregistering interface driver r8152
[  309.469355] usb 4-1: reset SuperSpeed USB device number 2 using xhci-hcd
[  309.488178] usb 4-1: Parent hub missing LPM exit latency info.  Power management will be impacted.
[  309.497348] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c00
[  309.505967] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c2c
[  309.514612] xhci-hcd xhci-hcd.0.auto: xHCI xhci_drop_endpoint called with disabled ep 967e1c58
[  309.687935] r8152 4-1:1.0 eth1: v2.14.0 (2020/09/24)
[  309.692904] r8152 4-1:1.0 eth1: This product is covered by one or more of the following patents:
                        US6,570,884, US6,115,776, and US6,327,625.

[  309.708553] usbcore: registered new interface driver r8152
[  314.825187] ifconfig: page allocation failure: order:4, mode:0x40d0
[  314.831514] CPU: 0 PID: 17807 Comm: ifconfig Tainted: PF          O 3.10.105 #25426
[  314.831541] [<80015320>] (unwind_backtrace+0x0/0xec) from [<8001193c>] (show_stack+0x10/0x14)
[  314.831556] [<8001193c>] (show_stack+0x10/0x14) from [<800920f8>] (warn_alloc_failed+0xe4/0x11c)
[  314.831567] [<800920f8>] (warn_alloc_failed+0xe4/0x11c) from [<8009443c>] (__alloc_pages_nodemask+0x514/0x7a4)
[  314.831589] [<8009443c>] (__alloc_pages_nodemask+0x514/0x7a4) from [<7fc72a34>] (alloc_rx_agg+0x58/0x150 [r8152])
[  314.831677] [<7fc72a34>] (alloc_rx_agg+0x58/0x150 [r8152]) from [<7fc72bac>] (alloc_all_mem+0x80/0x208 [r8152])
[  314.831692] [<7fc72bac>] (alloc_all_mem+0x80/0x208 [r8152]) from [<7fc75278>] (rtl8152_open+0x38/0x230 [r8152])
[  314.831710] [<7fc75278>] (rtl8152_open+0x38/0x230 [r8152]) from [<8040e214>] (__dev_open+0x98/0xf8)
[  314.831720] [<8040e214>] (__dev_open+0x98/0xf8) from [<8040e454>] (__dev_change_flags+0x94/0x128)
[  314.831729] [<8040e454>] (__dev_change_flags+0x94/0x128) from [<8040e554>] (dev_change_flags+0x10/0x48)
[  314.831743] [<8040e554>] (dev_change_flags+0x10/0x48) from [<80464ef4>] (devinet_ioctl+0x65c/0x734)
[  314.831754] [<80464ef4>] (devinet_ioctl+0x65c/0x734) from [<803f868c>] (sock_ioctl+0x1c8/0x29c)
[  314.831767] [<803f868c>] (sock_ioctl+0x1c8/0x29c) from [<800dfbf0>] (do_vfs_ioctl+0x4b4/0xaa8)
[  314.831777] [<800dfbf0>] (do_vfs_ioctl+0x4b4/0xaa8) from [<800e0254>] (SyS_ioctl+0x70/0x80)
[  314.831786] [<800e0254>] (SyS_ioctl+0x70/0x80) from [<8000db40>] (ret_fast_syscall+0x0/0x38)
[  314.831791] Mem-info:
[  314.831795] Normal per-cpu:
[  314.831799] CPU    0: hi:  186, btch:  31 usd:   0
[  314.831804] CPU    1: hi:  186, btch:  31 usd:   0
[  314.831813] active_anon:19850 inactive_anon:21365 isolated_anon:0
                active_file:12719 inactive_file:12735 isolated_file:0
                unevictable:881 dirty:9 writeback:0 unstable:0
                free:7480 slab_reclaimable:4323 slab_unreclaimable:6654
                mapped:14993 shmem:11047 pagetables:2139 bounce:0
                free_cma:3693
[  314.831833] Normal free:29920kB min:8192kB low:10240kB high:12288kB active_anon:79400kB inactive_anon:85460kB active_file:50876kB inactive_file:50940kB unevictable:3524kB isolated(anon):0kB isolated(file):0kB present:475136kB managed:393560kB mlocked:3524kB dirty:36kB writeback:0kB mapped:59972kB shmem:44188kB slab_reclaimable:17292kB slab_unreclaimable:26616kB kernel_stack:2824kB pagetables:8556kB unstable:0kB bounce:0kB free_cma:14772kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
[  314.831838] lowmem_reserve[]: 0 0
[  314.831844] Normal: 833*4kB (UEMC) 1500*8kB (UEMC) 90*16kB (UEMRC) 46*32kB (C) 43*64kB (C) 30*128kB (C) 16*256kB (C) 0*512kB 1*1024kB (C) 0*2048kB 0*4096kB = 29956kB
[  314.831870] 37357 total pagecache pages
[  314.831876] 822 pages in swap cache
[  314.831880] Swap cache stats: add 10738, delete 9916, find 11939/12086
[  314.831883] Free swap  = 2060952kB
[  314.831887] Total swap = 2097084kB
[  314.838096] 118784 pages of RAM
[  314.838109] 8276 free pages
[  314.838117] 15262 reserved pages
[  314.838126] 7561 slab pages
[  314.838134] 356493 pages shared
[  314.838143] 822 pages swap cached

Output of lsusb command

|__usb1          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (ehci_hcd ehci-platform.0) hub
|__usb2          1d6b:0001:0310 09  1.10   12MBit/s 0mA 1IF  (Linux 3.10.105 ohci_hcd Generic Platform OHCI Controller ohci-platform.0) hub
|__usb3          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (Linux 3.10.105 xhci-hcd xHCI Host Controller xhci-hcd.0.auto) hub
|__usb4          1d6b:0003:0310 09  3.00 5000MBit/s 0mA 1IF  (Linux 3.10.105 xhci-hcd xHCI Host Controller xhci-hcd.0.auto) hub
  |__4-1         0bda:8156:3100 00  3.20 5000MBit/s 256mA 1IF  (Realtek USB 10/100/1G/2.5G LAN 001000001)

Output of ifconfig -a command

eth0      Link encap:Ethernet  HWaddr 00:11:32:54:3E:37
          inet addr:192.168.1.102  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:151067 errors:0 dropped:0 overruns:0 frame:0
          TX packets:142222 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:72814177 (69.4 MiB)  TX bytes:33114755 (31.5 MiB)
          Interrupt:130

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:3582 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3582 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:484391 (473.0 KiB)  TX bytes:484391 (473.0 KiB)
@bb-qq
Copy link
Owner

bb-qq commented Feb 23, 2021 •
edited
Loading

Unfortunately, this model does not have enough memory to load the driver.

This error indicates that an allocation of 256kb physical contiguous memory was failed due to fragmentation or other reason.

[  314.825187] ifconfig: page allocation failure: order:4, mode:0x40d0

Uninstalling or stopping some applications/services might help to resolve the issue.

@bb-qq
Copy link
Owner

bb-qq commented May 29, 2021

I close this issue. Please feel free to re-open the issue if you have another question.

@bb-qq bb-qq closed this as completed May 29, 2021
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@bb-qq @Jacky71wu