This operation aborts a multipart upload. After a multipart upload is aborted, no additional parts can be uploaded using that upload ID. The storage consumed by any previously uploaded parts will be freed. However, if any part uploads are currently in progress, those part uploads might or might not succeed. As a result, it might be necessary to abort a given multipart upload multiple times in order to completely free all storage consumed by all parts.
To verify that all parts have been removed, so you don't get charged for the part storage, you should call the ListParts operation and ensure that the parts list is empty.
For information about permissions required to use the multipart upload API, see Multipart Upload API and Permissions.
The following operations are related to AbortMultipartUpload:
This action aborts a multipart upload. After a multipart upload is aborted, no additional parts can be uploaded using that upload ID. The storage consumed by any previously uploaded parts will be freed. However, if any part uploads are currently in progress, those part uploads might or might not succeed. As a result, it might be necessary to abort a given multipart upload multiple times in order to completely free all storage consumed by all parts.
To verify that all parts have been removed, so you don't get charged for the part storage, you should call the ListParts action and ensure that the parts list is empty.
For information about permissions required to use the multipart upload, see Multipart Upload and Permissions.
The following operations are related to AbortMultipartUpload:
Completes a multipart upload by assembling previously uploaded parts.
You first initiate the multipart upload and then upload all parts using the UploadPart operation. After successfully uploading all relevant parts of an upload, you call this operation to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the Complete Multipart Upload request, you must provide the parts list. You must ensure that the parts list is complete. This operation concatenates the parts that you provide in the list. For each part in the list, you must provide the part number and the ETag value, returned after that part was uploaded.
Processing of a Complete Multipart Upload request could take several minutes to complete. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. Because a request could fail after the initial 200 OK response has been sent, it is important that you check the response body to determine whether the request succeeded.
Note that if CompleteMultipartUpload fails, applications should be prepared to retry the failed requests. For more information, see Amazon S3 Error Best Practices.
For more information about multipart uploads, see Uploading Objects Using Multipart Upload.
For information about permissions required to use the multipart upload API, see Multipart Upload API and Permissions.
CompleteMultipartUpload has the following special errors:
Error code: EntityTooSmall
Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.
400 Bad Request
Error code: InvalidPart
Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.
400 Bad Request
Error code: InvalidPartOrder
Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.
400 Bad Request
Error code: NoSuchUpload
Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
404 Not Found
The following operations are related to CompleteMultipartUpload:
Completes a multipart upload by assembling previously uploaded parts.
You first initiate the multipart upload and then upload all parts using the UploadPart operation. After successfully uploading all relevant parts of an upload, you call this action to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the Complete Multipart Upload request, you must provide the parts list. You must ensure that the parts list is complete. This action concatenates the parts that you provide in the list. For each part in the list, you must provide the part number and the ETag value, returned after that part was uploaded.
Processing of a Complete Multipart Upload request could take several minutes to complete. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. Because a request could fail after the initial 200 OK response has been sent, it is important that you check the response body to determine whether the request succeeded.
Note that if CompleteMultipartUpload fails, applications should be prepared to retry the failed requests. For more information, see Amazon S3 Error Best Practices.
For more information about multipart uploads, see Uploading Objects Using Multipart Upload.
For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions.
CompleteMultipartUpload has the following special errors:
Error code: EntityTooSmall
Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.
400 Bad Request
Error code: InvalidPart
Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.
400 Bad Request
Error code: InvalidPartOrder
Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.
400 Bad Request
Error code: NoSuchUpload
Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
404 Not Found
The following operations are related to CompleteMultipartUpload:
Creates a copy of an object that is already stored in Amazon S3.
You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic operation using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy API. For more information, see Copy Object Using the REST Multipart Upload API.
All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account.
A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy operation starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. Design your application to parse the contents of the response and handle it appropriately.
If the copy is successful, you receive a response with information about the copied object.
If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.
The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.
Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.
Metadata
When copying an object, you can preserve all metadata (default) or specify new metadata. However, the ACL is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.
To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 Developer Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.
x-amz-copy-source-if Headers
To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:
x-amz-copy-source-if-match
x-amz-copy-source-if-none-match
x-amz-copy-source-if-unmodified-since
x-amz-copy-source-if-modified-since
If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:
x-amz-copy-source-if-match condition evaluates to true
x-amz-copy-source-if-unmodified-since condition evaluates to false
If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:
x-amz-copy-source-if-none-match condition evaluates to false
x-amz-copy-source-if-modified-since condition evaluates to true
All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.
Server-side encryption
When you perform a CopyObject operation, you can optionally use the appropriate encryption-related headers to encrypt the object using server-side encryption with AWS managed encryption keys (SSE-S3 or SSE-KMS) or a customer-provided encryption key. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption.
If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon Simple Storage Service Developer Guide.
Access Control List (ACL)-Specific Request Headers
When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual AWS accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.
Storage Class Options
You can use the CopyObject operation to change the storage class of an object that is already stored in Amazon S3 using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 Service Developer Guide.
Versioning
By default, x-amz-copy-source identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource.
If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response.
If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.
If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject.
The following operations are related to CopyObject:
For more information, see Copying Objects.
", + "documentation":"Creates a copy of an object that is already stored in Amazon S3.
You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy API. For more information, see Copy Object Using the REST Multipart Upload API.
All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account.
A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. Design your application to parse the contents of the response and handle it appropriately.
If the copy is successful, you receive a response with information about the copied object.
If the request is an HTTP 1.1 request, the response is chunk encoded. If it were not, it would not contain the content-length, and you would need to read the entire body.
The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.
Amazon S3 transfer acceleration does not support cross-Region copies. If you request a cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad Request error. For more information, see Transfer Acceleration.
Metadata
When copying an object, you can preserve all metadata (default) or specify new metadata. However, the ACL is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.
To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 Developer Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.
x-amz-copy-source-if Headers
To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:
x-amz-copy-source-if-match
x-amz-copy-source-if-none-match
x-amz-copy-source-if-unmodified-since
x-amz-copy-source-if-modified-since
If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:
x-amz-copy-source-if-match condition evaluates to true
x-amz-copy-source-if-unmodified-since condition evaluates to false
If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:
x-amz-copy-source-if-none-match condition evaluates to false
x-amz-copy-source-if-modified-since condition evaluates to true
All headers with the x-amz- prefix, including x-amz-copy-source, must be signed.
Server-side encryption
When you perform a CopyObject operation, you can optionally use the appropriate encryption-related headers to encrypt the object using server-side encryption with AWS managed encryption keys (SSE-S3 or SSE-KMS) or a customer-provided encryption key. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption.
If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon Simple Storage Service User Guide.
Access Control List (ACL)-Specific Request Headers
When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual AWS accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.
Storage Class Options
You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 Service Developer Guide.
Versioning
By default, x-amz-copy-source identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource.
If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response.
If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.
If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject.
The following operations are related to CopyObject:
For more information, see Copying Objects.
", "alias":"PutObjectCopy" }, "CreateBucket":{ @@ -79,7 +79,7 @@ "input":{"shape":"CreateMultipartUploadRequest"}, "output":{"shape":"CreateMultipartUploadOutput"}, "documentationUrl":"http://docs.amazonwebservices.com/AmazonS3/latest/API/mpUploadInitiate.html", - "documentation":"This operation initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request.
For more information about multipart uploads, see Multipart Upload Overview.
If you have configured a lifecycle rule to abort incomplete multipart uploads, the upload must complete within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort operation and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy.
For information about the permissions required to use the multipart upload API, see Multipart Upload API and Permissions.
For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (AWS Signature Version 4).
After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stop charging you for storing them only after you either complete or abort a multipart upload.
You can optionally request server-side encryption. For server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You can provide your own encryption key, or use AWS Key Management Service (AWS KMS) customer master keys (CMKs) or Amazon S3-managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the request to initiate the upload by using CreateMultipartUpload.
To perform a multipart upload with encryption using an AWS KMS CMK, the requester must have permission to the kms:Encrypt, kms:Decrypt, kms:ReEncrypt*, kms:GenerateDataKey*, and kms:DescribeKey actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload.
If your AWS Identity and Access Management (IAM) user or role is in the same AWS account as the AWS KMS CMK, then you must have these permissions on the key policy. If your IAM user or role belongs to a different account than the key, then you must have the permissions on both the key policy and your IAM user or role.
For more information, see Protecting Data Using Server-Side Encryption.
When copying an object, you can optionally specify the accounts or groups that should be granted specific permissions on the new object. There are two ways to grant the permissions using the request headers:
Specify a canned ACL with the x-amz-acl request header. For more information, see Canned ACL.
Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.
You can use either a canned ACL or specify access permissions explicitly. You cannot do both.
You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption. Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. The option you use depends on whether you want to use AWS managed encryption keys or provide your own encryption key.
Use encryption keys managed by Amazon S3 or customer master keys (CMKs) stored in AWS Key Management Service (AWS KMS) – If you want AWS to manage the keys used to encrypt data, specify the following headers in the request.
x-amz-server-side-encryption
x-amz-server-side-encryption-aws-kms-key-id
x-amz-server-side-encryption-context
If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the AWS managed CMK in AWS KMS to protect the data.
All GET and PUT requests for an object protected by AWS KMS fail if you don't make them with SSL or by using SigV4.
For more information about server-side encryption with CMKs stored in AWS KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs stored in AWS KMS.
Use customer-provided encryption keys – If you want to manage your own encryption keys, provide all the following headers in the request.
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information about server-side encryption with CMKs stored in AWS KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs stored in AWS KMS.
You also can use the following access control–related headers with this operation. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual AWS accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the object. For more information, see Using ACLs. With this operation, you can grant access permissions using one of the following two methods:
Specify a canned ACL (x-amz-acl) — Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.
Specify access permissions explicitly — To explicitly grant access permissions to specific AWS accounts or groups, use the following headers. Each header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. In the header, you specify a list of grantees who get the specific permission. To grant permissions explicitly, use:
x-amz-grant-read
x-amz-grant-write
x-amz-grant-read-acp
x-amz-grant-write-acp
x-amz-grant-full-control
You specify each grantee as a type=value pair, where the type is one of the following:
id – if the value specified is the canonical user ID of an AWS account
uri – if you are granting permissions to a predefined group
emailAddress – if the value specified is the email address of an AWS account
Using email addresses to specify a grantee is only supported in the following AWS Regions:
US East (N. Virginia)
US West (N. California)
US West (Oregon)
Asia Pacific (Singapore)
Asia Pacific (Sydney)
Asia Pacific (Tokyo)
Europe (Ireland)
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the AWS General Reference.
For example, the following x-amz-grant-read header grants the AWS accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id=\"11112222333\", id=\"444455556666\"
The following operations are related to CreateMultipartUpload:
This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request.
For more information about multipart uploads, see Multipart Upload Overview.
If you have configured a lifecycle rule to abort incomplete multipart uploads, the upload must complete within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy.
For information about the permissions required to use the multipart upload API, see Multipart Upload and Permissions.
For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (AWS Signature Version 4).
After you initiate a multipart upload and upload one or more parts, to stop being charged for storing the uploaded parts, you must either complete or abort the multipart upload. Amazon S3 frees up the space used to store the parts and stop charging you for storing them only after you either complete or abort a multipart upload.
You can optionally request server-side encryption. For server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You can provide your own encryption key, or use AWS Key Management Service (AWS KMS) customer master keys (CMKs) or Amazon S3-managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the request to initiate the upload by using CreateMultipartUpload.
To perform a multipart upload with encryption using an AWS KMS CMK, the requester must have permission to the kms:Encrypt, kms:Decrypt, kms:ReEncrypt*, kms:GenerateDataKey*, and kms:DescribeKey actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload.
If your AWS Identity and Access Management (IAM) user or role is in the same AWS account as the AWS KMS CMK, then you must have these permissions on the key policy. If your IAM user or role belongs to a different account than the key, then you must have the permissions on both the key policy and your IAM user or role.
For more information, see Protecting Data Using Server-Side Encryption.
When copying an object, you can optionally specify the accounts or groups that should be granted specific permissions on the new object. There are two ways to grant the permissions using the request headers:
Specify a canned ACL with the x-amz-acl request header. For more information, see Canned ACL.
Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.
You can use either a canned ACL or specify access permissions explicitly. You cannot do both.
You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption. Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. The option you use depends on whether you want to use AWS managed encryption keys or provide your own encryption key.
Use encryption keys managed by Amazon S3 or customer master keys (CMKs) stored in AWS Key Management Service (AWS KMS) – If you want AWS to manage the keys used to encrypt data, specify the following headers in the request.
x-amz-server-side-encryption
x-amz-server-side-encryption-aws-kms-key-id
x-amz-server-side-encryption-context
If you specify x-amz-server-side-encryption:aws:kms, but don't provide x-amz-server-side-encryption-aws-kms-key-id, Amazon S3 uses the AWS managed CMK in AWS KMS to protect the data.
All GET and PUT requests for an object protected by AWS KMS fail if you don't make them with SSL or by using SigV4.
For more information about server-side encryption with CMKs stored in AWS KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs stored in AWS KMS.
Use customer-provided encryption keys – If you want to manage your own encryption keys, provide all the following headers in the request.
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information about server-side encryption with CMKs stored in AWS KMS (SSE-KMS), see Protecting Data Using Server-Side Encryption with CMKs stored in AWS KMS.
You also can use the following access control–related headers with this operation. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual AWS accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the object. For more information, see Using ACLs. With this operation, you can grant access permissions using one of the following two methods:
Specify a canned ACL (x-amz-acl) — Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.
Specify access permissions explicitly — To explicitly grant access permissions to specific AWS accounts or groups, use the following headers. Each header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. In the header, you specify a list of grantees who get the specific permission. To grant permissions explicitly, use:
x-amz-grant-read
x-amz-grant-write
x-amz-grant-read-acp
x-amz-grant-write-acp
x-amz-grant-full-control
You specify each grantee as a type=value pair, where the type is one of the following:
id – if the value specified is the canonical user ID of an AWS account
uri – if you are granting permissions to a predefined group
emailAddress – if the value specified is the email address of an AWS account
Using email addresses to specify a grantee is only supported in the following AWS Regions:
US East (N. Virginia)
US West (N. California)
US West (Oregon)
Asia Pacific (Singapore)
Asia Pacific (Sydney)
Asia Pacific (Tokyo)
Europe (Ireland)
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the AWS General Reference.
For example, the following x-amz-grant-read header grants the AWS accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id=\"11112222333\", id=\"444455556666\"
The following operations are related to CreateMultipartUpload:
Deletes the cors configuration information set for the bucket.
To use this operation, you must have permission to perform the s3:PutBucketCORS action. The bucket owner has this permission by default and can grant this permission to others.
For information about cors, see Enabling Cross-Origin Resource Sharing in the Amazon Simple Storage Service Developer Guide.
Related Resources:
" + "documentation":"Deletes the cors configuration information set for the bucket.
To use this operation, you must have permission to perform the s3:PutBucketCORS action. The bucket owner has this permission by default and can grant this permission to others.
For information about cors, see Enabling Cross-Origin Resource Sharing in the Amazon Simple Storage Service User Guide.
Related Resources:
" }, "DeleteBucketEncryption":{ "name":"DeleteBucketEncryption", @@ -122,7 +122,7 @@ "responseCode":204 }, "input":{"shape":"DeleteBucketEncryptionRequest"}, - "documentation":"This implementation of the DELETE operation removes default encryption from the bucket. For information about the Amazon S3 default encryption feature, see Amazon S3 Default Bucket Encryption in the Amazon Simple Storage Service Developer Guide.
To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to your Amazon S3 Resources in the Amazon Simple Storage Service Developer Guide.
Related Resources
" + "documentation":"This implementation of the DELETE action removes default encryption from the bucket. For information about the Amazon S3 default encryption feature, see Amazon S3 Default Bucket Encryption in the Amazon Simple Storage Service User Guide.
To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to your Amazon S3 Resources in the Amazon Simple Storage Service User Guide.
Related Resources
" }, "DeleteBucketIntelligentTieringConfiguration":{ "name":"DeleteBucketIntelligentTieringConfiguration", @@ -184,7 +184,7 @@ }, "input":{"shape":"DeleteBucketPolicyRequest"}, "documentationUrl":"http://docs.amazonwebservices.com/AmazonS3/latest/API/RESTBucketDELETEpolicy.html", - "documentation":"This implementation of the DELETE operation uses the policy subresource to delete the policy of a specified bucket. If you are using an identity other than the root user of the AWS account that owns the bucket, the calling identity must have the DeleteBucketPolicy permissions on the specified bucket and belong to the bucket owner's account to use this operation.
If you don't have DeleteBucketPolicy permissions, Amazon S3 returns a 403 Access Denied error. If you have the correct permissions, but you're not using an identity that belongs to the bucket owner's account, Amazon S3 returns a 405 Method Not Allowed error.
As a security precaution, the root user of the AWS account that owns a bucket can always use this operation, even if the policy explicitly denies the root user the ability to perform this action.
For more information about bucket policies, see Using Bucket Policies and UserPolicies.
The following operations are related to DeleteBucketPolicy
This implementation of the DELETE action uses the policy subresource to delete the policy of a specified bucket. If you are using an identity other than the root user of the AWS account that owns the bucket, the calling identity must have the DeleteBucketPolicy permissions on the specified bucket and belong to the bucket owner's account to use this operation.
If you don't have DeleteBucketPolicy permissions, Amazon S3 returns a 403 Access Denied error. If you have the correct permissions, but you're not using an identity that belongs to the bucket owner's account, Amazon S3 returns a 405 Method Not Allowed error.
As a security precaution, the root user of the AWS account that owns a bucket can always use this operation, even if the policy explicitly denies the root user the ability to perform this action.
For more information about bucket policies, see Using Bucket Policies and UserPolicies.
The following operations are related to DeleteBucketPolicy
Deletes the replication configuration from the bucket.
To use this operation, you must have permissions to perform the s3:PutReplicationConfiguration action. The bucket owner has these permissions by default and can grant it to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
It can take a while for the deletion of a replication configuration to fully propagate.
For information about replication configuration, see Replication in the Amazon S3 Developer Guide.
The following operations are related to DeleteBucketReplication:
Deletes the replication configuration from the bucket.
To use this operation, you must have permissions to perform the s3:PutReplicationConfiguration action. The bucket owner has these permissions by default and can grant it to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
It can take a while for the deletion of a replication configuration to fully propagate.
For information about replication configuration, see Replication in the Amazon S3 Developer Guide.
The following operations are related to DeleteBucketReplication:
This operation removes the website configuration for a bucket. Amazon S3 returns a 200 OK response upon successfully deleting a website configuration on the specified bucket. You will get a 200 OK response if the website configuration you are trying to delete does not exist on the bucket. Amazon S3 returns a 404 response if the bucket specified in the request does not exist.
This DELETE operation requires the S3:DeleteBucketWebsite permission. By default, only the bucket owner can delete the website configuration attached to a bucket. However, bucket owners can grant other users permission to delete the website configuration by writing a bucket policy granting them the S3:DeleteBucketWebsite permission.
For more information about hosting websites, see Hosting Websites on Amazon S3.
The following operations are related to DeleteBucketWebsite:
This action removes the website configuration for a bucket. Amazon S3 returns a 200 OK response upon successfully deleting a website configuration on the specified bucket. You will get a 200 OK response if the website configuration you are trying to delete does not exist on the bucket. Amazon S3 returns a 404 response if the bucket specified in the request does not exist.
This DELETE action requires the S3:DeleteBucketWebsite permission. By default, only the bucket owner can delete the website configuration attached to a bucket. However, bucket owners can grant other users permission to delete the website configuration by writing a bucket policy granting them the S3:DeleteBucketWebsite permission.
For more information about hosting websites, see Hosting Websites on Amazon S3.
The following operations are related to DeleteBucketWebsite:
Removes the null version (if there is one) of an object and inserts a delete marker, which becomes the latest version of the object. If there isn't a null version, Amazon S3 does not remove any objects.
To remove a specific version, you must be the bucket owner and you must use the version Id subresource. Using this subresource permanently deletes the version. If the object deleted is a delete marker, Amazon S3 sets the response header, x-amz-delete-marker, to true.
If the object you want to delete is in a bucket where the bucket versioning configuration is MFA Delete enabled, you must include the x-amz-mfa request header in the DELETE versionId request. Requests that include x-amz-mfa must use HTTPS.
For more information about MFA Delete, see Using MFA Delete. To see sample requests that use versioning, see Sample Request.
You can delete objects by explicitly calling the DELETE Object API or configure its lifecycle (PutBucketLifecycle) to enable Amazon S3 to remove them for you. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them the s3:DeleteObject, s3:DeleteObjectVersion, and s3:PutLifeCycleConfiguration actions.
The following operation is related to DeleteObject:
Removes the null version (if there is one) of an object and inserts a delete marker, which becomes the latest version of the object. If there isn't a null version, Amazon S3 does not remove any objects.
To remove a specific version, you must be the bucket owner and you must use the version Id subresource. Using this subresource permanently deletes the version. If the object deleted is a delete marker, Amazon S3 sets the response header, x-amz-delete-marker, to true.
If the object you want to delete is in a bucket where the bucket versioning configuration is MFA Delete enabled, you must include the x-amz-mfa request header in the DELETE versionId request. Requests that include x-amz-mfa must use HTTPS.
For more information about MFA Delete, see Using MFA Delete. To see sample requests that use versioning, see Sample Request.
You can delete objects by explicitly calling DELETE Object or configure its lifecycle (PutBucketLifecycle) to enable Amazon S3 to remove them for you. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them the s3:DeleteObject, s3:DeleteObjectVersion, and s3:PutLifeCycleConfiguration actions.
The following action is related to DeleteObject:
This operation enables you to delete multiple objects from a bucket using a single HTTP request. If you know the object keys that you want to delete, then this operation provides a suitable alternative to sending individual delete requests, reducing per-request overhead.
The request contains a list of up to 1000 keys that you want to delete. In the XML, you provide the object key names, and optionally, version IDs if you want to delete a specific version of the object from a versioning-enabled bucket. For each key, Amazon S3 performs a delete operation and returns the result of that delete, success, or failure, in the response. Note that if the object specified in the request is not found, Amazon S3 returns the result as deleted.
The operation supports two modes for the response: verbose and quiet. By default, the operation uses verbose mode in which the response includes the result of deletion of each key in your request. In quiet mode the response includes only keys where the delete operation encountered an error. For a successful deletion, the operation does not return any information about the delete in the response body.
When performing this operation on an MFA Delete enabled bucket, that attempts to delete any versioned objects, you must include an MFA token. If you do not provide one, the entire request will fail, even if there are non-versioned objects you are trying to delete. If you provide an invalid token, whether there are versioned keys in the request or not, the entire Multi-Object Delete request will fail. For information about MFA Delete, see MFA Delete.
Finally, the Content-MD5 header is required for all Multi-Object Delete requests. Amazon S3 uses the header value to ensure that your request body has not been altered in transit.
The following operations are related to DeleteObjects:
This action enables you to delete multiple objects from a bucket using a single HTTP request. If you know the object keys that you want to delete, then this action provides a suitable alternative to sending individual delete requests, reducing per-request overhead.
The request contains a list of up to 1000 keys that you want to delete. In the XML, you provide the object key names, and optionally, version IDs if you want to delete a specific version of the object from a versioning-enabled bucket. For each key, Amazon S3 performs a delete action and returns the result of that delete, success, or failure, in the response. Note that if the object specified in the request is not found, Amazon S3 returns the result as deleted.
The action supports two modes for the response: verbose and quiet. By default, the action uses verbose mode in which the response includes the result of deletion of each key in your request. In quiet mode the response includes only keys where the delete action encountered an error. For a successful deletion, the action does not return any information about the delete in the response body.
When performing this action on an MFA Delete enabled bucket, that attempts to delete any versioned objects, you must include an MFA token. If you do not provide one, the entire request will fail, even if there are non-versioned objects you are trying to delete. If you provide an invalid token, whether there are versioned keys in the request or not, the entire Multi-Object Delete request will fail. For information about MFA Delete, see MFA Delete.
Finally, the Content-MD5 header is required for all Multi-Object Delete requests. Amazon S3 uses the header value to ensure that your request body has not been altered in transit.
The following operations are related to DeleteObjects:
This implementation of the GET operation uses the accelerate subresource to return the Transfer Acceleration state of a bucket, which is either Enabled or Suspended. Amazon S3 Transfer Acceleration is a bucket-level feature that enables you to perform faster data transfers to and from Amazon S3.
To use this operation, you must have permission to perform the s3:GetAccelerateConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to your Amazon S3 Resources in the Amazon Simple Storage Service Developer Guide.
You set the Transfer Acceleration state of an existing bucket to Enabled or Suspended by using the PutBucketAccelerateConfiguration operation.
A GET accelerate request does not return a state value for a bucket that has no transfer acceleration state. A bucket has no Transfer Acceleration state if a state has never been set on the bucket.
For more information about transfer acceleration, see Transfer Acceleration in the Amazon Simple Storage Service Developer Guide.
Related Resources
" + "documentation":"This implementation of the GET action uses the accelerate subresource to return the Transfer Acceleration state of a bucket, which is either Enabled or Suspended. Amazon S3 Transfer Acceleration is a bucket-level feature that enables you to perform faster data transfers to and from Amazon S3.
To use this operation, you must have permission to perform the s3:GetAccelerateConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to your Amazon S3 Resources in the Amazon Simple Storage Service User Guide.
You set the Transfer Acceleration state of an existing bucket to Enabled or Suspended by using the PutBucketAccelerateConfiguration operation.
A GET accelerate request does not return a state value for a bucket that has no transfer acceleration state. A bucket has no Transfer Acceleration state if a state has never been set on the bucket.
For more information about transfer acceleration, see Transfer Acceleration in the Amazon Simple Storage Service User Guide.
Related Resources
" }, "GetBucketAcl":{ "name":"GetBucketAcl", @@ -283,7 +283,7 @@ "input":{"shape":"GetBucketAclRequest"}, "output":{"shape":"GetBucketAclOutput"}, "documentationUrl":"http://docs.amazonwebservices.com/AmazonS3/latest/API/RESTBucketGETacl.html", - "documentation":"This implementation of the GET operation uses the acl subresource to return the access control list (ACL) of a bucket. To use GET to return the ACL of the bucket, you must have READ_ACP access to the bucket. If READ_ACP permission is granted to the anonymous user, you can return the ACL of the bucket without using an authorization header.
Related Resources
" + "documentation":"This implementation of the GET action uses the acl subresource to return the access control list (ACL) of a bucket. To use GET to return the ACL of the bucket, you must have READ_ACP access to the bucket. If READ_ACP permission is granted to the anonymous user, you can return the ACL of the bucket without using an authorization header.
Related Resources
" }, "GetBucketAnalyticsConfiguration":{ "name":"GetBucketAnalyticsConfiguration", @@ -293,7 +293,7 @@ }, "input":{"shape":"GetBucketAnalyticsConfigurationRequest"}, "output":{"shape":"GetBucketAnalyticsConfigurationOutput"}, - "documentation":"This implementation of the GET operation returns an analytics configuration (identified by the analytics configuration ID) from the bucket.
To use this operation, you must have permissions to perform the s3:GetAnalyticsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon Simple Storage Service Developer Guide.
For information about Amazon S3 analytics feature, see Amazon S3 Analytics – Storage Class Analysis in the Amazon Simple Storage Service Developer Guide.
Related Resources
This implementation of the GET action returns an analytics configuration (identified by the analytics configuration ID) from the bucket.
To use this operation, you must have permissions to perform the s3:GetAnalyticsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon Simple Storage Service User Guide.
For information about Amazon S3 analytics feature, see Amazon S3 Analytics – Storage Class Analysis in the Amazon Simple Storage Service User Guide.
Related Resources
Bucket lifecycle configuration now supports specifying a lifecycle rule using an object key name prefix, one or more object tags, or a combination of both. Accordingly, this section describes the latest API. The response describes the new filter element that you can use to specify a filter to select a subset of objects to which the rule applies. If you are using a previous version of the lifecycle configuration, it still works. For the earlier API description, see GetBucketLifecycle.
Returns the lifecycle configuration information set on the bucket. For information about lifecycle configuration, see Object Lifecycle Management.
To use this operation, you must have permission to perform the s3:GetLifecycleConfiguration action. The bucket owner has this permission, by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
GetBucketLifecycleConfiguration has the following special error:
Error code: NoSuchLifecycleConfiguration
Description: The lifecycle configuration does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
The following operations are related to GetBucketLifecycleConfiguration:
Bucket lifecycle configuration now supports specifying a lifecycle rule using an object key name prefix, one or more object tags, or a combination of both. Accordingly, this section describes the latest API. The response describes the new filter element that you can use to specify a filter to select a subset of objects to which the rule applies. If you are using a previous version of the lifecycle configuration, it still works. For the earlier action, see GetBucketLifecycle.
Returns the lifecycle configuration information set on the bucket. For information about lifecycle configuration, see Object Lifecycle Management.
To use this operation, you must have permission to perform the s3:GetLifecycleConfiguration action. The bucket owner has this permission, by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
GetBucketLifecycleConfiguration has the following special error:
Error code: NoSuchLifecycleConfiguration
Description: The lifecycle configuration does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
The following operations are related to GetBucketLifecycleConfiguration:
Returns the notification configuration of a bucket.
If notifications are not enabled on the bucket, the operation returns an empty NotificationConfiguration element.
By default, you must be the bucket owner to read the notification configuration of a bucket. However, the bucket owner can use a bucket policy to grant permission to other users to read this configuration with the s3:GetBucketNotification permission.
For more information about setting and reading the notification configuration on a bucket, see Setting Up Notification of Bucket Events. For more information about bucket policies, see Using Bucket Policies.
The following operation is related to GetBucketNotification:
Returns the notification configuration of a bucket.
If notifications are not enabled on the bucket, the action returns an empty NotificationConfiguration element.
By default, you must be the bucket owner to read the notification configuration of a bucket. However, the bucket owner can use a bucket policy to grant permission to other users to read this configuration with the s3:GetBucketNotification permission.
For more information about setting and reading the notification configuration on a bucket, see Setting Up Notification of Bucket Events. For more information about bucket policies, see Using Bucket Policies.
The following action is related to GetBucketNotification:
Returns the policy of a specified bucket. If you are using an identity other than the root user of the AWS account that owns the bucket, the calling identity must have the GetBucketPolicy permissions on the specified bucket and belong to the bucket owner's account in order to use this operation.
If you don't have GetBucketPolicy permissions, Amazon S3 returns a 403 Access Denied error. If you have the correct permissions, but you're not using an identity that belongs to the bucket owner's account, Amazon S3 returns a 405 Method Not Allowed error.
As a security precaution, the root user of the AWS account that owns a bucket can always use this operation, even if the policy explicitly denies the root user the ability to perform this action.
For more information about bucket policies, see Using Bucket Policies and User Policies.
The following operation is related to GetBucketPolicy:
Returns the policy of a specified bucket. If you are using an identity other than the root user of the AWS account that owns the bucket, the calling identity must have the GetBucketPolicy permissions on the specified bucket and belong to the bucket owner's account in order to use this operation.
If you don't have GetBucketPolicy permissions, Amazon S3 returns a 403 Access Denied error. If you have the correct permissions, but you're not using an identity that belongs to the bucket owner's account, Amazon S3 returns a 405 Method Not Allowed error.
As a security precaution, the root user of the AWS account that owns a bucket can always use this operation, even if the policy explicitly denies the root user the ability to perform this action.
For more information about bucket policies, see Using Bucket Policies and User Policies.
The following action is related to GetBucketPolicy:
Returns the replication configuration of a bucket.
It can take a while to propagate the put or delete a replication configuration to all Amazon S3 systems. Therefore, a get request soon after put or delete can return a wrong result.
For information about replication configuration, see Replication in the Amazon Simple Storage Service Developer Guide.
This operation requires permissions for the s3:GetReplicationConfiguration action. For more information about permissions, see Using Bucket Policies and User Policies.
If you include the Filter element in a replication configuration, you must also include the DeleteMarkerReplication and Priority elements. The response also returns those elements.
For information about GetBucketReplication errors, see List of replication-related error codes
The following operations are related to GetBucketReplication:
Returns the replication configuration of a bucket.
It can take a while to propagate the put or delete a replication configuration to all Amazon S3 systems. Therefore, a get request soon after put or delete can return a wrong result.
For information about replication configuration, see Replication in the Amazon Simple Storage Service User Guide.
This action requires permissions for the s3:GetReplicationConfiguration action. For more information about permissions, see Using Bucket Policies and User Policies.
If you include the Filter element in a replication configuration, you must also include the DeleteMarkerReplication and Priority elements. The response also returns those elements.
For information about GetBucketReplication errors, see List of replication-related error codes
The following operations are related to GetBucketReplication:
Returns the website configuration for a bucket. To host website on Amazon S3, you can configure a bucket as website by adding a website configuration. For more information about hosting websites, see Hosting Websites on Amazon S3.
This GET operation requires the S3:GetBucketWebsite permission. By default, only the bucket owner can read the bucket website configuration. However, bucket owners can allow other users to read the website configuration by writing a bucket policy granting them the S3:GetBucketWebsite permission.
The following operations are related to DeleteBucketWebsite:
Returns the website configuration for a bucket. To host website on Amazon S3, you can configure a bucket as website by adding a website configuration. For more information about hosting websites, see Hosting Websites on Amazon S3.
This GET action requires the S3:GetBucketWebsite permission. By default, only the bucket owner can read the bucket website configuration. However, bucket owners can allow other users to read the website configuration by writing a bucket policy granting them the S3:GetBucketWebsite permission.
The following operations are related to DeleteBucketWebsite:
Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header.
An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg.
To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification.
To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl.
If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this operation returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects.
Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in AWS KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).
Assuming you have permission to read object tags (permission for the s3:GetObjectVersionTagging action), the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.
Permissions
You need the s3:GetObject permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.
If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 (\"no such key\") error.
If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 (\"access denied\") error.
Versioning
By default, the GET operation returns the current version of an object. To return a different version, use the versionId subresource.
If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.
For more information about versioning, see PutBucketVersioning.
Overriding Response Header Values
There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request.
You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.
You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.
response-content-type
response-content-language
response-expires
response-cache-control
response-content-disposition
response-content-encoding
Additional Considerations about Request Headers
If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.
If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code.
For more information about conditional requests, see RFC 7232.
The following operations are related to GetObject:
Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header.
An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg.
To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification.
To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl.
If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects.
Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in AWS KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).
Assuming you have permission to read object tags (permission for the s3:GetObjectVersionTagging action), the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.
Permissions
You need the s3:GetObject permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.
If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 (\"no such key\") error.
If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 (\"access denied\") error.
Versioning
By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.
If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.
For more information about versioning, see PutBucketVersioning.
Overriding Response Header Values
There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request.
You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.
You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.
response-content-type
response-content-language
response-expires
response-cache-control
response-content-disposition
response-content-encoding
Additional Considerations about Request Headers
If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.
If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code.
For more information about conditional requests, see RFC 7232.
The following operations are related to GetObject:
Returns the tag-set of an object. You send the GET request against the tagging subresource associated with the object.
To use this operation, you must have permission to perform the s3:GetObjectTagging action. By default, the GET operation returns information about current version of an object. For a versioned bucket, you can have multiple versions of an object in your bucket. To retrieve tags of any other version, use the versionId query parameter. You also need permission for the s3:GetObjectVersionTagging action.
By default, the bucket owner has this permission and can grant this permission to others.
For information about the Amazon S3 object tagging feature, see Object Tagging.
The following operation is related to GetObjectTagging:
Returns the tag-set of an object. You send the GET request against the tagging subresource associated with the object.
To use this operation, you must have permission to perform the s3:GetObjectTagging action. By default, the GET action returns information about current version of an object. For a versioned bucket, you can have multiple versions of an object in your bucket. To retrieve tags of any other version, use the versionId query parameter. You also need permission for the s3:GetObjectVersionTagging action.
By default, the bucket owner has this permission and can grant this permission to others.
For information about the Amazon S3 object tagging feature, see Object Tagging.
The following action is related to GetObjectTagging:
Returns torrent files from a bucket. BitTorrent can save you bandwidth when you're distributing large files. For more information about BitTorrent, see Using BitTorrent with Amazon S3.
You can get torrent only for objects that are less than 5 GB in size, and that are not encrypted using server-side encryption with a customer-provided encryption key.
To use GET, you must have READ access to the object.
This action is not supported by Amazon S3 on Outposts.
The following operation is related to GetObjectTorrent:
Returns torrent files from a bucket. BitTorrent can save you bandwidth when you're distributing large files. For more information about BitTorrent, see Using BitTorrent with Amazon S3.
You can get torrent only for objects that are less than 5 GB in size, and that are not encrypted using server-side encryption with a customer-provided encryption key.
To use GET, you must have READ access to the object.
This action is not supported by Amazon S3 on Outposts.
The following action is related to GetObjectTorrent:
This operation is useful to determine if a bucket exists and you have permission to access it. The operation returns a 200 OK if the bucket exists and you have permission to access it.
If the bucket does not exist or you do not have permission to access it, the HEAD request returns a generic 404 Not Found or 403 Forbidden code. A message body is not included, so you cannot determine the exception beyond these error codes.
To use this operation, you must have permissions to perform the s3:ListBucket action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
This action is useful to determine if a bucket exists and you have permission to access it. The action returns a 200 OK if the bucket exists and you have permission to access it.
If the bucket does not exist or you do not have permission to access it, the HEAD request returns a generic 404 Not Found or 403 Forbidden code. A message body is not included, so you cannot determine the exception beyond these error codes.
To use this operation, you must have permissions to perform the s3:ListBucket action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
The HEAD operation retrieves metadata from an object without returning the object itself. This operation is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object.
A HEAD request has the same options as a GET operation on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).
Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in AWS KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.
The last modified property in this case is the creation date of the object.
Request headers are limited to 8 KB in size. For more information, see Common Request Headers.
Consider the following when using request headers:
Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:
If-Match condition evaluates to true, and;
If-Unmodified-Since condition evaluates to false;
Then Amazon S3 returns 200 OK and the data requested.
Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:
If-None-Match condition evaluates to false, and;
If-Modified-Since condition evaluates to true;
Then Amazon S3 returns the 304 Not Modified response code.
For more information about conditional requests, see RFC 7232.
Permissions
You need the s3:GetObject permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.
If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 (\"no such key\") error.
If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 (\"access denied\") error.
The following operation is related to HeadObject:
The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object.
A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).
Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in AWS KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.
The last modified property in this case is the creation date of the object.
Request headers are limited to 8 KB in size. For more information, see Common Request Headers.
Consider the following when using request headers:
Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:
If-Match condition evaluates to true, and;
If-Unmodified-Since condition evaluates to false;
Then Amazon S3 returns 200 OK and the data requested.
Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:
If-None-Match condition evaluates to false, and;
If-Modified-Since condition evaluates to true;
Then Amazon S3 returns the 304 Not Modified response code.
For more information about conditional requests, see RFC 7232.
Permissions
You need the s3:GetObject permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.
If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 (\"no such key\") error.
If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 (\"access denied\") error.
The following action is related to HeadObject:
Lists the analytics configurations for the bucket. You can have up to 1,000 analytics configurations per bucket.
This operation supports list pagination and does not return more than 100 configurations at a time. You should always check the IsTruncated element in the response. If there are no more configurations to list, IsTruncated is set to false. If there are more configurations to list, IsTruncated is set to true, and there will be a value in NextContinuationToken. You use the NextContinuationToken value to continue the pagination of the list by passing the value in continuation-token in the request to GET the next page.
To use this operation, you must have permissions to perform the s3:GetAnalyticsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
For information about Amazon S3 analytics feature, see Amazon S3 Analytics – Storage Class Analysis.
The following operations are related to ListBucketAnalyticsConfigurations:
Lists the analytics configurations for the bucket. You can have up to 1,000 analytics configurations per bucket.
This action supports list pagination and does not return more than 100 configurations at a time. You should always check the IsTruncated element in the response. If there are no more configurations to list, IsTruncated is set to false. If there are more configurations to list, IsTruncated is set to true, and there will be a value in NextContinuationToken. You use the NextContinuationToken value to continue the pagination of the list by passing the value in continuation-token in the request to GET the next page.
To use this operation, you must have permissions to perform the s3:GetAnalyticsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
For information about Amazon S3 analytics feature, see Amazon S3 Analytics – Storage Class Analysis.
The following operations are related to ListBucketAnalyticsConfigurations:
Returns a list of inventory configurations for the bucket. You can have up to 1,000 analytics configurations per bucket.
This operation supports list pagination and does not return more than 100 configurations at a time. Always check the IsTruncated element in the response. If there are no more configurations to list, IsTruncated is set to false. If there are more configurations to list, IsTruncated is set to true, and there is a value in NextContinuationToken. You use the NextContinuationToken value to continue the pagination of the list by passing the value in continuation-token in the request to GET the next page.
To use this operation, you must have permissions to perform the s3:GetInventoryConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
For information about the Amazon S3 inventory feature, see Amazon S3 Inventory
The following operations are related to ListBucketInventoryConfigurations:
Returns a list of inventory configurations for the bucket. You can have up to 1,000 analytics configurations per bucket.
This action supports list pagination and does not return more than 100 configurations at a time. Always check the IsTruncated element in the response. If there are no more configurations to list, IsTruncated is set to false. If there are more configurations to list, IsTruncated is set to true, and there is a value in NextContinuationToken. You use the NextContinuationToken value to continue the pagination of the list by passing the value in continuation-token in the request to GET the next page.
To use this operation, you must have permissions to perform the s3:GetInventoryConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
For information about the Amazon S3 inventory feature, see Amazon S3 Inventory
The following operations are related to ListBucketInventoryConfigurations:
Lists the metrics configurations for the bucket. The metrics configurations are only for the request metrics of the bucket and do not provide information on daily storage metrics. You can have up to 1,000 configurations per bucket.
This operation supports list pagination and does not return more than 100 configurations at a time. Always check the IsTruncated element in the response. If there are no more configurations to list, IsTruncated is set to false. If there are more configurations to list, IsTruncated is set to true, and there is a value in NextContinuationToken. You use the NextContinuationToken value to continue the pagination of the list by passing the value in continuation-token in the request to GET the next page.
To use this operation, you must have permissions to perform the s3:GetMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
For more information about metrics configurations and CloudWatch request metrics, see Monitoring Metrics with Amazon CloudWatch.
The following operations are related to ListBucketMetricsConfigurations:
Lists the metrics configurations for the bucket. The metrics configurations are only for the request metrics of the bucket and do not provide information on daily storage metrics. You can have up to 1,000 configurations per bucket.
This action supports list pagination and does not return more than 100 configurations at a time. Always check the IsTruncated element in the response. If there are no more configurations to list, IsTruncated is set to false. If there are more configurations to list, IsTruncated is set to true, and there is a value in NextContinuationToken. You use the NextContinuationToken value to continue the pagination of the list by passing the value in continuation-token in the request to GET the next page.
To use this operation, you must have permissions to perform the s3:GetMetricsConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
For more information about metrics configurations and CloudWatch request metrics, see Monitoring Metrics with Amazon CloudWatch.
The following operations are related to ListBucketMetricsConfigurations:
This operation lists in-progress multipart uploads. An in-progress multipart upload is a multipart upload that has been initiated using the Initiate Multipart Upload request, but has not yet been completed or aborted.
This operation returns at most 1,000 multipart uploads in the response. 1,000 multipart uploads is the maximum number of uploads a response can include, which is also the default value. You can further limit the number of uploads in a response by specifying the max-uploads parameter in the response. If additional multipart uploads satisfy the list criteria, the response will contain an IsTruncated element with the value true. To list the additional multipart uploads, use the key-marker and upload-id-marker request parameters.
In the response, the uploads are sorted by key. If your application has initiated more than one multipart upload using the same object key, then uploads in the response are first sorted by key. Additionally, uploads are sorted in ascending order within each key by the upload initiation time.
For more information on multipart uploads, see Uploading Objects Using Multipart Upload.
For information on permissions required to use the multipart upload API, see Multipart Upload API and Permissions.
The following operations are related to ListMultipartUploads:
This action lists in-progress multipart uploads. An in-progress multipart upload is a multipart upload that has been initiated using the Initiate Multipart Upload request, but has not yet been completed or aborted.
This action returns at most 1,000 multipart uploads in the response. 1,000 multipart uploads is the maximum number of uploads a response can include, which is also the default value. You can further limit the number of uploads in a response by specifying the max-uploads parameter in the response. If additional multipart uploads satisfy the list criteria, the response will contain an IsTruncated element with the value true. To list the additional multipart uploads, use the key-marker and upload-id-marker request parameters.
In the response, the uploads are sorted by key. If your application has initiated more than one multipart upload using the same object key, then uploads in the response are first sorted by key. Additionally, uploads are sorted in ascending order within each key by the upload initiation time.
For more information on multipart uploads, see Uploading Objects Using Multipart Upload.
For information on permissions required to use the multipart upload API, see Multipart Upload and Permissions.
The following operations are related to ListMultipartUploads:
Returns some or all (up to 1,000) of the objects in a bucket. You can use the request parameters as selection criteria to return a subset of the objects in a bucket. A 200 OK response can contain valid or invalid XML. Be sure to design your application to parse the contents of the response and handle it appropriately.
This API has been revised. We recommend that you use the newer version, ListObjectsV2, when developing applications. For backward compatibility, Amazon S3 continues to support ListObjects.
The following operations are related to ListObjects:
Returns some or all (up to 1,000) of the objects in a bucket. You can use the request parameters as selection criteria to return a subset of the objects in a bucket. A 200 OK response can contain valid or invalid XML. Be sure to design your application to parse the contents of the response and handle it appropriately.
This action has been revised. We recommend that you use the newer version, ListObjectsV2, when developing applications. For backward compatibility, Amazon S3 continues to support ListObjects.
The following operations are related to ListObjects:
Returns some or all (up to 1,000) of the objects in a bucket. You can use the request parameters as selection criteria to return a subset of the objects in a bucket. A 200 OK response can contain valid or invalid XML. Make sure to design your application to parse the contents of the response and handle it appropriately. Objects are returned sorted in an ascending order of the respective key names in the list.
To use this operation, you must have READ access to the bucket.
To use this operation in an AWS Identity and Access Management (IAM) policy, you must have permissions to perform the s3:ListBucket action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
This section describes the latest revision of the API. We recommend that you use this revised API for application development. For backward compatibility, Amazon S3 continues to support the prior version of this API, ListObjects.
To get a list of your buckets, see ListBuckets.
The following operations are related to ListObjectsV2:
Returns some or all (up to 1,000) of the objects in a bucket. You can use the request parameters as selection criteria to return a subset of the objects in a bucket. A 200 OK response can contain valid or invalid XML. Make sure to design your application to parse the contents of the response and handle it appropriately. Objects are returned sorted in an ascending order of the respective key names in the list.
To use this operation, you must have READ access to the bucket.
To use this action in an AWS Identity and Access Management (IAM) policy, you must have permissions to perform the s3:ListBucket action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
This section describes the latest revision of this action. We recommend that you use this revised API for application development. For backward compatibility, Amazon S3 continues to support the prior version of this API, ListObjects.
To get a list of your buckets, see ListBuckets.
The following operations are related to ListObjectsV2:
Lists the parts that have been uploaded for a specific multipart upload. This operation must include the upload ID, which you obtain by sending the initiate multipart upload request (see CreateMultipartUpload). This request returns a maximum of 1,000 uploaded parts. The default number of parts returned is 1,000 parts. You can restrict the number of parts returned by specifying the max-parts request parameter. If your multipart upload consists of more than 1,000 parts, the response returns an IsTruncated field with the value of true, and a NextPartNumberMarker element. In subsequent ListParts requests you can include the part-number-marker query string parameter and set its value to the NextPartNumberMarker field value from the previous response.
For more information on multipart uploads, see Uploading Objects Using Multipart Upload.
For information on permissions required to use the multipart upload API, see Multipart Upload API and Permissions.
The following operations are related to ListParts:
Lists the parts that have been uploaded for a specific multipart upload. This operation must include the upload ID, which you obtain by sending the initiate multipart upload request (see CreateMultipartUpload). This request returns a maximum of 1,000 uploaded parts. The default number of parts returned is 1,000 parts. You can restrict the number of parts returned by specifying the max-parts request parameter. If your multipart upload consists of more than 1,000 parts, the response returns an IsTruncated field with the value of true, and a NextPartNumberMarker element. In subsequent ListParts requests you can include the part-number-marker query string parameter and set its value to the NextPartNumberMarker field value from the previous response.
For more information on multipart uploads, see Uploading Objects Using Multipart Upload.
For information on permissions required to use the multipart upload API, see Multipart Upload and Permissions.
The following operations are related to ListParts:
Sets the accelerate configuration of an existing bucket. Amazon S3 Transfer Acceleration is a bucket-level feature that enables you to perform faster data transfers to Amazon S3.
To use this operation, you must have permission to perform the s3:PutAccelerateConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
The Transfer Acceleration state of a bucket can be set to one of the following two values:
Enabled – Enables accelerated data transfers to the bucket.
Suspended – Disables accelerated data transfers to the bucket.
The GetBucketAccelerateConfiguration operation returns the transfer acceleration state of a bucket.
After setting the Transfer Acceleration state of a bucket to Enabled, it might take up to thirty minutes before the data transfer rates to the bucket increase.
The name of the bucket used for Transfer Acceleration must be DNS-compliant and must not contain periods (\".\").
For more information about transfer acceleration, see Transfer Acceleration.
The following operations are related to PutBucketAccelerateConfiguration:
Sets the accelerate configuration of an existing bucket. Amazon S3 Transfer Acceleration is a bucket-level feature that enables you to perform faster data transfers to Amazon S3.
To use this operation, you must have permission to perform the s3:PutAccelerateConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
The Transfer Acceleration state of a bucket can be set to one of the following two values:
Enabled – Enables accelerated data transfers to the bucket.
Suspended – Disables accelerated data transfers to the bucket.
The GetBucketAccelerateConfiguration action returns the transfer acceleration state of a bucket.
After setting the Transfer Acceleration state of a bucket to Enabled, it might take up to thirty minutes before the data transfer rates to the bucket increase.
The name of the bucket used for Transfer Acceleration must be DNS-compliant and must not contain periods (\".\").
For more information about transfer acceleration, see Transfer Acceleration.
The following operations are related to PutBucketAccelerateConfiguration:
Sets the cors configuration for your bucket. If the configuration exists, Amazon S3 replaces it.
To use this operation, you must be allowed to perform the s3:PutBucketCORS action. By default, the bucket owner has this permission and can grant it to others.
You set this configuration on a bucket so that the bucket can service cross-origin requests. For example, you might want to enable a request whose origin is http://www.example.com to access your Amazon S3 bucket at my.example.bucket.com by using the browser's XMLHttpRequest capability.
To enable cross-origin resource sharing (CORS) on a bucket, you add the cors subresource to the bucket. The cors subresource is an XML document in which you configure rules that identify origins and the HTTP methods that can be executed on your bucket. The document is limited to 64 KB in size.
When Amazon S3 receives a cross-origin request (or a pre-flight OPTIONS request) against a bucket, it evaluates the cors configuration on the bucket and uses the first CORSRule rule that matches the incoming browser request to enable a cross-origin request. For a rule to match, the following conditions must be met:
The request's Origin header must match AllowedOrigin elements.
The request method (for example, GET, PUT, HEAD, and so on) or the Access-Control-Request-Method header in case of a pre-flight OPTIONS request must be one of the AllowedMethod elements.
Every header specified in the Access-Control-Request-Headers request header of a pre-flight request must match an AllowedHeader element.
For more information about CORS, go to Enabling Cross-Origin Resource Sharing in the Amazon Simple Storage Service Developer Guide.
Related Resources
", + "documentation":"Sets the cors configuration for your bucket. If the configuration exists, Amazon S3 replaces it.
To use this operation, you must be allowed to perform the s3:PutBucketCORS action. By default, the bucket owner has this permission and can grant it to others.
You set this configuration on a bucket so that the bucket can service cross-origin requests. For example, you might want to enable a request whose origin is http://www.example.com to access your Amazon S3 bucket at my.example.bucket.com by using the browser's XMLHttpRequest capability.
To enable cross-origin resource sharing (CORS) on a bucket, you add the cors subresource to the bucket. The cors subresource is an XML document in which you configure rules that identify origins and the HTTP methods that can be executed on your bucket. The document is limited to 64 KB in size.
When Amazon S3 receives a cross-origin request (or a pre-flight OPTIONS request) against a bucket, it evaluates the cors configuration on the bucket and uses the first CORSRule rule that matches the incoming browser request to enable a cross-origin request. For a rule to match, the following conditions must be met:
The request's Origin header must match AllowedOrigin elements.
The request method (for example, GET, PUT, HEAD, and so on) or the Access-Control-Request-Method header in case of a pre-flight OPTIONS request must be one of the AllowedMethod elements.
Every header specified in the Access-Control-Request-Headers request header of a pre-flight request must match an AllowedHeader element.
For more information about CORS, go to Enabling Cross-Origin Resource Sharing in the Amazon Simple Storage Service User Guide.
Related Resources
", "httpChecksumRequired":true }, "PutBucketEncryption":{ @@ -774,7 +774,7 @@ "requestUri":"/{Bucket}?encryption" }, "input":{"shape":"PutBucketEncryptionRequest"}, - "documentation":"This operation uses the encryption subresource to configure default encryption and Amazon S3 Bucket Key for an existing bucket.
Default encryption for a bucket can use server-side encryption with Amazon S3-managed keys (SSE-S3) or AWS KMS customer master keys (SSE-KMS). If you specify default encryption using SSE-KMS, you can also configure Amazon S3 Bucket Key. For information about default encryption, see Amazon S3 default bucket encryption in the Amazon Simple Storage Service Developer Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon Simple Storage Service Developer Guide.
This operation requires AWS Signature Version 4. For more information, see Authenticating Requests (AWS Signature Version 4).
To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon Simple Storage Service Developer Guide.
Related Resources
", + "documentation":"This action uses the encryption subresource to configure default encryption and Amazon S3 Bucket Key for an existing bucket.
Default encryption for a bucket can use server-side encryption with Amazon S3-managed keys (SSE-S3) or AWS KMS customer master keys (SSE-KMS). If you specify default encryption using SSE-KMS, you can also configure Amazon S3 Bucket Key. For information about default encryption, see Amazon S3 default bucket encryption in the Amazon Simple Storage Service User Guide. For more information about S3 Bucket Keys, see Amazon S3 Bucket Keys in the Amazon Simple Storage Service User Guide.
This action requires AWS Signature Version 4. For more information, see Authenticating Requests (AWS Signature Version 4).
To use this operation, you must have permissions to perform the s3:PutEncryptionConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon Simple Storage Service User Guide.
Related Resources
", "httpChecksumRequired":true }, "PutBucketIntelligentTieringConfiguration":{ @@ -793,7 +793,7 @@ "requestUri":"/{Bucket}?inventory" }, "input":{"shape":"PutBucketInventoryConfigurationRequest"}, - "documentation":"This implementation of the PUT operation adds an inventory configuration (identified by the inventory ID) to the bucket. You can have up to 1,000 inventory configurations per bucket.
Amazon S3 inventory generates inventories of the objects in the bucket on a daily or weekly basis, and the results are published to a flat file. The bucket that is inventoried is called the source bucket, and the bucket where the inventory flat file is stored is called the destination bucket. The destination bucket must be in the same AWS Region as the source bucket.
When you configure an inventory for a source bucket, you specify the destination bucket where you want the inventory to be stored, and whether to generate the inventory daily or weekly. You can also configure what object metadata to include and whether to inventory all object versions or only current versions. For more information, see Amazon S3 Inventory in the Amazon Simple Storage Service Developer Guide.
You must create a bucket policy on the destination bucket to grant permissions to Amazon S3 to write objects to the bucket in the defined location. For an example policy, see Granting Permissions for Amazon S3 Inventory and Storage Class Analysis.
To use this operation, you must have permissions to perform the s3:PutInventoryConfiguration action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon Simple Storage Service Developer Guide.
Special Errors
HTTP 400 Bad Request Error
Code: InvalidArgument
Cause: Invalid Argument
HTTP 400 Bad Request Error
Code: TooManyConfigurations
Cause: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.
HTTP 403 Forbidden Error
Code: AccessDenied
Cause: You are not the owner of the specified bucket, or you do not have the s3:PutInventoryConfiguration bucket permission to set the configuration on the bucket.
Related Resources
This implementation of the PUT action adds an inventory configuration (identified by the inventory ID) to the bucket. You can have up to 1,000 inventory configurations per bucket.
Amazon S3 inventory generates inventories of the objects in the bucket on a daily or weekly basis, and the results are published to a flat file. The bucket that is inventoried is called the source bucket, and the bucket where the inventory flat file is stored is called the destination bucket. The destination bucket must be in the same AWS Region as the source bucket.
When you configure an inventory for a source bucket, you specify the destination bucket where you want the inventory to be stored, and whether to generate the inventory daily or weekly. You can also configure what object metadata to include and whether to inventory all object versions or only current versions. For more information, see Amazon S3 Inventory in the Amazon Simple Storage Service User Guide.
You must create a bucket policy on the destination bucket to grant permissions to Amazon S3 to write objects to the bucket in the defined location. For an example policy, see Granting Permissions for Amazon S3 Inventory and Storage Class Analysis.
To use this operation, you must have permissions to perform the s3:PutInventoryConfiguration action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon Simple Storage Service User Guide.
Special Errors
HTTP 400 Bad Request Error
Code: InvalidArgument
Cause: Invalid Argument
HTTP 400 Bad Request Error
Code: TooManyConfigurations
Cause: You are attempting to create a new configuration but have already reached the 1,000-configuration limit.
HTTP 403 Forbidden Error
Code: AccessDenied
Cause: You are not the owner of the specified bucket, or you do not have the s3:PutInventoryConfiguration bucket permission to set the configuration on the bucket.
Related Resources
For an updated version of this API, see PutBucketLifecycleConfiguration. This version has been deprecated. Existing lifecycle configurations will work. For new lifecycle configurations, use the updated API.
Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. For information about lifecycle configuration, see Object Lifecycle Management in the Amazon Simple Storage Service Developer Guide.
By default, all Amazon S3 resources, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration) are private. Only the resource owner, the AWS account that created the resource, can access it. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, users must get the s3:PutLifecycleConfiguration permission.
You can also explicitly deny permissions. Explicit denial also supersedes any other permissions. If you want to prevent users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:
s3:DeleteObject
s3:DeleteObjectVersion
s3:PutLifecycleConfiguration
For more information about permissions, see Managing Access Permissions to your Amazon S3 Resources in the Amazon Simple Storage Service Developer Guide.
For more examples of transitioning objects to storage classes such as STANDARD_IA or ONEZONE_IA, see Examples of Lifecycle Configuration.
Related Resources
GetBucketLifecycle(Deprecated)
By default, a resource owner—in this case, a bucket owner, which is the AWS account that created the bucket—can perform any of the operations. A resource owner can also grant others permission to perform the operation. For more information, see the following topics in the Amazon Simple Storage Service Developer Guide:
For an updated version of this API, see PutBucketLifecycleConfiguration. This version has been deprecated. Existing lifecycle configurations will work. For new lifecycle configurations, use the updated API.
Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. For information about lifecycle configuration, see Object Lifecycle Management in the Amazon Simple Storage Service User Guide.
By default, all Amazon S3 resources, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration) are private. Only the resource owner, the AWS account that created the resource, can access it. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, users must get the s3:PutLifecycleConfiguration permission.
You can also explicitly deny permissions. Explicit denial also supersedes any other permissions. If you want to prevent users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:
s3:DeleteObject
s3:DeleteObjectVersion
s3:PutLifecycleConfiguration
For more information about permissions, see Managing Access Permissions to your Amazon S3 Resources in the Amazon Simple Storage Service User Guide.
For more examples of transitioning objects to storage classes such as STANDARD_IA or ONEZONE_IA, see Examples of Lifecycle Configuration.
Related Resources
GetBucketLifecycle(Deprecated)
By default, a resource owner—in this case, a bucket owner, which is the AWS account that created the bucket—can perform any of the operations. A resource owner can also grant others permission to perform the operation. For more information, see the following topics in the Amazon Simple Storage Service User Guide:
Enables notifications of specified events for a bucket. For more information about event notifications, see Configuring Event Notifications.
Using this API, you can replace an existing notification configuration. The configuration is an XML file that defines the event types that you want Amazon S3 to publish and the destination where you want Amazon S3 to publish an event notification when it detects an event of the specified type.
By default, your bucket has no event notifications configured. That is, the notification configuration will be an empty NotificationConfiguration.
<NotificationConfiguration>
</NotificationConfiguration>
This operation replaces the existing notification configuration with the configuration you include in the request body.
After Amazon S3 receives this request, it first verifies that any Amazon Simple Notification Service (Amazon SNS) or Amazon Simple Queue Service (Amazon SQS) destination exists, and that the bucket owner has permission to publish to it by sending a test notification. In the case of AWS Lambda destinations, Amazon S3 verifies that the Lambda function permissions grant Amazon S3 permission to invoke the function from the Amazon S3 bucket. For more information, see Configuring Notifications for Amazon S3 Events.
You can disable notifications by adding the empty NotificationConfiguration element.
By default, only the bucket owner can configure notifications on a bucket. However, bucket owners can use a bucket policy to grant permission to other users to set this configuration with s3:PutBucketNotification permission.
The PUT notification is an atomic operation. For example, suppose your notification configuration includes SNS topic, SQS queue, and Lambda function configurations. When you send a PUT request with this configuration, Amazon S3 sends test messages to your SNS topic. If the message fails, the entire PUT operation will fail, and Amazon S3 will not add the configuration to your bucket.
Responses
If the configuration in the request body includes only one TopicConfiguration specifying only the s3:ReducedRedundancyLostObject event type, the response will also include the x-amz-sns-test-message-id header containing the message ID of the test notification sent to the topic.
The following operation is related to PutBucketNotificationConfiguration:
Enables notifications of specified events for a bucket. For more information about event notifications, see Configuring Event Notifications.
Using this API, you can replace an existing notification configuration. The configuration is an XML file that defines the event types that you want Amazon S3 to publish and the destination where you want Amazon S3 to publish an event notification when it detects an event of the specified type.
By default, your bucket has no event notifications configured. That is, the notification configuration will be an empty NotificationConfiguration.
<NotificationConfiguration>
</NotificationConfiguration>
This action replaces the existing notification configuration with the configuration you include in the request body.
After Amazon S3 receives this request, it first verifies that any Amazon Simple Notification Service (Amazon SNS) or Amazon Simple Queue Service (Amazon SQS) destination exists, and that the bucket owner has permission to publish to it by sending a test notification. In the case of AWS Lambda destinations, Amazon S3 verifies that the Lambda function permissions grant Amazon S3 permission to invoke the function from the Amazon S3 bucket. For more information, see Configuring Notifications for Amazon S3 Events.
You can disable notifications by adding the empty NotificationConfiguration element.
By default, only the bucket owner can configure notifications on a bucket. However, bucket owners can use a bucket policy to grant permission to other users to set this configuration with s3:PutBucketNotification permission.
The PUT notification is an atomic operation. For example, suppose your notification configuration includes SNS topic, SQS queue, and Lambda function configurations. When you send a PUT request with this configuration, Amazon S3 sends test messages to your SNS topic. If the message fails, the entire PUT action will fail, and Amazon S3 will not add the configuration to your bucket.
Responses
If the configuration in the request body includes only one TopicConfiguration specifying only the s3:ReducedRedundancyLostObject event type, the response will also include the x-amz-sns-test-message-id header containing the message ID of the test notification sent to the topic.
The following action is related to PutBucketNotificationConfiguration:
Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 Developer Guide.
To perform this operation, the user or role performing the operation must have the iam:PassRole permission.
Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information.
A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset.
To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.
If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.
For information about enabling versioning on a bucket, see Using Versioning.
By default, a resource owner, in this case the AWS account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.
Handling Replication of Encrypted Objects
By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with CMKs stored in AWS KMS. To replicate AWS KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using CMKs stored in AWS KMS.
For information on PutBucketReplication errors, see List of replication-related error codes
The following operations are related to PutBucketReplication:
Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 Developer Guide.
To perform this operation, the user or role performing the action must have the iam:PassRole permission.
Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information.
A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset.
To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.
If you are using an earlier version of the replication configuration, Amazon S3 handles replication of delete markers differently. For more information, see Backward Compatibility.
For information about enabling versioning on a bucket, see Using Versioning.
By default, a resource owner, in this case the AWS account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.
Handling Replication of Encrypted Objects
By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with CMKs stored in AWS KMS. To replicate AWS KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using CMKs stored in AWS KMS.
For information on PutBucketReplication errors, see List of replication-related error codes
The following operations are related to PutBucketReplication:
Sets the tags for a bucket.
Use tags to organize your AWS bill to reflect your own cost structure. To do this, sign up to get your AWS account bill with tag key values included. Then, to see the cost of combined resources, organize your billing information according to resources with the same tag key values. For example, you can tag several resources with a specific application name, and then organize your billing information to see the total cost of that application across several services. For more information, see Cost Allocation and Tagging.
Within a bucket, if you add a tag that has the same key as an existing tag, the new value overwrites the old value. For more information, see Using Cost Allocation in Amazon S3 Bucket Tags.
To use this operation, you must have permissions to perform the s3:PutBucketTagging action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
PutBucketTagging has the following special errors:
Error code: InvalidTagError
Description: The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For information about tag restrictions, see User-Defined Tag Restrictions and AWS-Generated Cost Allocation Tag Restrictions.
Error code: MalformedXMLError
Description: The XML provided does not match the schema.
Error code: OperationAbortedError
Description: A conflicting conditional operation is currently in progress against this resource. Please try again.
Error code: InternalError
Description: The service was unable to apply the provided tag to the bucket.
The following operations are related to PutBucketTagging:
Sets the tags for a bucket.
Use tags to organize your AWS bill to reflect your own cost structure. To do this, sign up to get your AWS account bill with tag key values included. Then, to see the cost of combined resources, organize your billing information according to resources with the same tag key values. For example, you can tag several resources with a specific application name, and then organize your billing information to see the total cost of that application across several services. For more information, see Cost Allocation and Tagging.
Within a bucket, if you add a tag that has the same key as an existing tag, the new value overwrites the old value. For more information, see Using Cost Allocation in Amazon S3 Bucket Tags.
To use this operation, you must have permissions to perform the s3:PutBucketTagging action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
PutBucketTagging has the following special errors:
Error code: InvalidTagError
Description: The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For information about tag restrictions, see User-Defined Tag Restrictions and AWS-Generated Cost Allocation Tag Restrictions.
Error code: MalformedXMLError
Description: The XML provided does not match the schema.
Error code: OperationAbortedError
Description: A conflicting conditional action is currently in progress against this resource. Please try again.
Error code: InternalError
Description: The service was unable to apply the provided tag to the bucket.
The following operations are related to PutBucketTagging:
Sets the configuration of the website that is specified in the website subresource. To configure a bucket as a website, you can add this subresource on the bucket with website configuration information such as the file name of the index document and any redirect rules. For more information, see Hosting Websites on Amazon S3.
This PUT operation requires the S3:PutBucketWebsite permission. By default, only the bucket owner can configure the website attached to a bucket; however, bucket owners can allow other users to set the website configuration by writing a bucket policy that grants them the S3:PutBucketWebsite permission.
To redirect all website requests sent to the bucket's website endpoint, you add a website configuration with the following elements. Because all requests are sent to another website, you don't need to provide index document name for the bucket.
WebsiteConfiguration
RedirectAllRequestsTo
HostName
Protocol
If you want granular control over redirects, you can use the following elements to add routing rules that describe conditions for redirecting requests and information about the redirect destination. In this case, the website configuration must provide an index document for the bucket, because some requests might not be redirected.
WebsiteConfiguration
IndexDocument
Suffix
ErrorDocument
Key
RoutingRules
RoutingRule
Condition
HttpErrorCodeReturnedEquals
KeyPrefixEquals
Redirect
Protocol
HostName
ReplaceKeyPrefixWith
ReplaceKeyWith
HttpRedirectCode
Amazon S3 has a limitation of 50 routing rules per website configuration. If you require more than 50 routing rules, you can use object redirect. For more information, see Configuring an Object Redirect in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"Sets the configuration of the website that is specified in the website subresource. To configure a bucket as a website, you can add this subresource on the bucket with website configuration information such as the file name of the index document and any redirect rules. For more information, see Hosting Websites on Amazon S3.
This PUT action requires the S3:PutBucketWebsite permission. By default, only the bucket owner can configure the website attached to a bucket; however, bucket owners can allow other users to set the website configuration by writing a bucket policy that grants them the S3:PutBucketWebsite permission.
To redirect all website requests sent to the bucket's website endpoint, you add a website configuration with the following elements. Because all requests are sent to another website, you don't need to provide index document name for the bucket.
WebsiteConfiguration
RedirectAllRequestsTo
HostName
Protocol
If you want granular control over redirects, you can use the following elements to add routing rules that describe conditions for redirecting requests and information about the redirect destination. In this case, the website configuration must provide an index document for the bucket, because some requests might not be redirected.
WebsiteConfiguration
IndexDocument
Suffix
ErrorDocument
Key
RoutingRules
RoutingRule
Condition
HttpErrorCodeReturnedEquals
KeyPrefixEquals
Redirect
Protocol
HostName
ReplaceKeyPrefixWith
ReplaceKeyWith
HttpRedirectCode
Amazon S3 has a limitation of 50 routing rules per website configuration. If you require more than 50 routing rules, you can use object redirect. For more information, see Configuring an Object Redirect in the Amazon Simple Storage Service User Guide.
", "httpChecksumRequired":true }, "PutObject":{ @@ -942,7 +942,7 @@ "input":{"shape":"PutObjectRequest"}, "output":{"shape":"PutObjectOutput"}, "documentationUrl":"http://docs.amazonwebservices.com/AmazonS3/latest/API/RESTObjectPUT.html", - "documentation":"Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it.
Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket.
Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. Amazon S3 does not provide object locking; if you need this, make sure to build it into your application layer or use versioning instead.
To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.
The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon Simple Storage Service Developer Guide.
Server-side Encryption
You can optionally request server-side encryption. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. You have the option to provide your own encryption key or use AWS managed encryption keys (SSE-S3 or SSE-KMS). For more information, see Using Server-Side Encryption.
If you request server-side encryption using AWS Key Management Service (SSE-KMS), you can enable an S3 Bucket Key at the object-level. For more information, see Amazon S3 Bucket Keys in the Amazon Simple Storage Service Developer Guide.
Access Control List (ACL)-Specific Request Headers
You can use headers to grant ACL- based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual AWS accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.
Storage Class Options
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 Service Developer Guide.
Versioning
If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects.
For more information about versioning, see Adding Objects to Versioning Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.
Related Resources
" + "documentation":"Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it.
Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket.
Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. Amazon S3 does not provide object locking; if you need this, make sure to build it into your application layer or use versioning instead.
To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.
The Content-MD5 header is required for any request to upload an object with a retention period configured using Amazon S3 Object Lock. For more information about Amazon S3 Object Lock, see Amazon S3 Object Lock Overview in the Amazon Simple Storage Service Developer Guide.
Server-side Encryption
You can optionally request server-side encryption. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. You have the option to provide your own encryption key or use AWS managed encryption keys (SSE-S3 or SSE-KMS). For more information, see Using Server-Side Encryption.
If you request server-side encryption using AWS Key Management Service (SSE-KMS), you can enable an S3 Bucket Key at the object-level. For more information, see Amazon S3 Bucket Keys in the Amazon Simple Storage Service User Guide.
Access Control List (ACL)-Specific Request Headers
You can use headers to grant ACL- based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual AWS accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.
Storage Class Options
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 Service Developer Guide.
Versioning
If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects.
For more information about versioning, see Adding Objects to Versioning Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.
Related Resources
" }, "PutObjectAcl":{ "name":"PutObjectAcl", @@ -956,7 +956,7 @@ {"shape":"NoSuchKey"} ], "documentationUrl":"http://docs.amazonwebservices.com/AmazonS3/latest/API/RESTObjectPUTacl.html", - "documentation":"Uses the acl subresource to set the access control list (ACL) permissions for a new or existing object in an S3 bucket. You must have WRITE_ACP permission to set the ACL of an object. For more information, see What permissions can I grant? in the Amazon Simple Storage Service Developer Guide.
This action is not supported by Amazon S3 on Outposts.
Depending on your application needs, you can choose to set the ACL on an object using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, you can continue to use that approach. For more information, see Access Control List (ACL) Overview in the Amazon S3 Developer Guide.
Access Permissions
You can set access permissions using one of the following methods:
Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.
Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (AWS accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.
You specify each grantee as a type=value pair, where the type is one of the following:
id – if the value specified is the canonical user ID of an AWS account
uri – if you are granting permissions to a predefined group
emailAddress – if the value specified is the email address of an AWS account
Using email addresses to specify a grantee is only supported in the following AWS Regions:
US East (N. Virginia)
US West (N. California)
US West (Oregon)
Asia Pacific (Singapore)
Asia Pacific (Sydney)
Asia Pacific (Tokyo)
Europe (Ireland)
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the AWS General Reference.
For example, the following x-amz-grant-read header grants list objects permission to the two AWS accounts identified by their email addresses.
x-amz-grant-read: emailAddress=\"xyz@amazon.com\", emailAddress=\"abc@amazon.com\"
You can use either a canned ACL or specify access permissions explicitly. You cannot do both.
Grantee Values
You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:
By the person's ID:
<Grantee xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xsi:type=\"CanonicalUser\"><ID><>ID<></ID><DisplayName><>GranteesEmail<></DisplayName> </Grantee>
DisplayName is optional and ignored in the request.
By URI:
<Grantee xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xsi:type=\"Group\"><URI><>http://acs.amazonaws.com/groups/global/AuthenticatedUsers<></URI></Grantee>
By Email address:
<Grantee xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xsi:type=\"AmazonCustomerByEmail\"><EmailAddress><>Grantees@email.com<></EmailAddress>lt;/Grantee>
The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.
Using email addresses to specify a grantee is only supported in the following AWS Regions:
US East (N. Virginia)
US West (N. California)
US West (Oregon)
Asia Pacific (Singapore)
Asia Pacific (Sydney)
Asia Pacific (Tokyo)
Europe (Ireland)
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the AWS General Reference.
Versioning
The ACL of an object is set at the object version level. By default, PUT sets the ACL of the current version of an object. To set the ACL of a different version, use the versionId subresource.
Related Resources
", + "documentation":"Uses the acl subresource to set the access control list (ACL) permissions for a new or existing object in an S3 bucket. You must have WRITE_ACP permission to set the ACL of an object. For more information, see What permissions can I grant? in the Amazon Simple Storage Service User Guide.
This action is not supported by Amazon S3 on Outposts.
Depending on your application needs, you can choose to set the ACL on an object using either the request body or the headers. For example, if you have an existing application that updates a bucket ACL using the request body, you can continue to use that approach. For more information, see Access Control List (ACL) Overview in the Amazon S3 Developer Guide.
Access Permissions
You can set access permissions using one of the following methods:
Specify a canned ACL with the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. Specify the canned ACL name as the value of x-amz-acl. If you use this header, you cannot use other access control-specific headers in your request. For more information, see Canned ACL.
Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. When using these headers, you specify explicit access permissions and grantees (AWS accounts or Amazon S3 groups) who will receive the permission. If you use these ACL-specific headers, you cannot use x-amz-acl header to set a canned ACL. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.
You specify each grantee as a type=value pair, where the type is one of the following:
id – if the value specified is the canonical user ID of an AWS account
uri – if you are granting permissions to a predefined group
emailAddress – if the value specified is the email address of an AWS account
Using email addresses to specify a grantee is only supported in the following AWS Regions:
US East (N. Virginia)
US West (N. California)
US West (Oregon)
Asia Pacific (Singapore)
Asia Pacific (Sydney)
Asia Pacific (Tokyo)
Europe (Ireland)
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the AWS General Reference.
For example, the following x-amz-grant-read header grants list objects permission to the two AWS accounts identified by their email addresses.
x-amz-grant-read: emailAddress=\"xyz@amazon.com\", emailAddress=\"abc@amazon.com\"
You can use either a canned ACL or specify access permissions explicitly. You cannot do both.
Grantee Values
You can specify the person (grantee) to whom you're assigning access rights (using request elements) in the following ways:
By the person's ID:
<Grantee xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xsi:type=\"CanonicalUser\"><ID><>ID<></ID><DisplayName><>GranteesEmail<></DisplayName> </Grantee>
DisplayName is optional and ignored in the request.
By URI:
<Grantee xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xsi:type=\"Group\"><URI><>http://acs.amazonaws.com/groups/global/AuthenticatedUsers<></URI></Grantee>
By Email address:
<Grantee xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xsi:type=\"AmazonCustomerByEmail\"><EmailAddress><>Grantees@email.com<></EmailAddress>lt;/Grantee>
The grantee is resolved to the CanonicalUser and, in a response to a GET Object acl request, appears as the CanonicalUser.
Using email addresses to specify a grantee is only supported in the following AWS Regions:
US East (N. Virginia)
US West (N. California)
US West (Oregon)
Asia Pacific (Singapore)
Asia Pacific (Sydney)
Asia Pacific (Tokyo)
Europe (Ireland)
South America (São Paulo)
For a list of all the Amazon S3 supported Regions and endpoints, see Regions and Endpoints in the AWS General Reference.
Versioning
The ACL of an object is set at the object version level. By default, PUT sets the ACL of the current version of an object. To set the ACL of a different version, use the versionId subresource.
Related Resources
", "httpChecksumRequired":true }, "PutObjectLegalHold":{ @@ -1000,7 +1000,7 @@ }, "input":{"shape":"PutObjectTaggingRequest"}, "output":{"shape":"PutObjectTaggingOutput"}, - "documentation":"Sets the supplied tag-set to an object that already exists in a bucket.
A tag is a key-value pair. You can associate tags with an object by sending a PUT request against the tagging subresource that is associated with the object. You can retrieve tags by sending a GET request. For more information, see GetObjectTagging.
For tagging-related restrictions related to characters and encodings, see Tag Restrictions. Note that Amazon S3 limits the maximum number of tags to 10 tags per object.
To use this operation, you must have permission to perform the s3:PutObjectTagging action. By default, the bucket owner has this permission and can grant this permission to others.
To put tags of any other version, use the versionId query parameter. You also need permission for the s3:PutObjectVersionTagging action.
For information about the Amazon S3 object tagging feature, see Object Tagging.
Special Errors
Code: InvalidTagError
Cause: The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For more information, see Object Tagging.
Code: MalformedXMLError
Cause: The XML provided does not match the schema.
Code: OperationAbortedError
Cause: A conflicting conditional operation is currently in progress against this resource. Please try again.
Code: InternalError
Cause: The service was unable to apply the provided tag to the object.
Related Resources
", + "documentation":"Sets the supplied tag-set to an object that already exists in a bucket.
A tag is a key-value pair. You can associate tags with an object by sending a PUT request against the tagging subresource that is associated with the object. You can retrieve tags by sending a GET request. For more information, see GetObjectTagging.
For tagging-related restrictions related to characters and encodings, see Tag Restrictions. Note that Amazon S3 limits the maximum number of tags to 10 tags per object.
To use this operation, you must have permission to perform the s3:PutObjectTagging action. By default, the bucket owner has this permission and can grant this permission to others.
To put tags of any other version, use the versionId query parameter. You also need permission for the s3:PutObjectVersionTagging action.
For information about the Amazon S3 object tagging feature, see Object Tagging.
Special Errors
Code: InvalidTagError
Cause: The tag provided was not a valid tag. This error can occur if the tag did not pass input validation. For more information, see Object Tagging.
Code: MalformedXMLError
Cause: The XML provided does not match the schema.
Code: OperationAbortedError
Cause: A conflicting conditional action is currently in progress against this resource. Please try again.
Code: InternalError
Cause: The service was unable to apply the provided tag to the object.
Related Resources
", "httpChecksumRequired":true }, "PutPublicAccessBlock":{ @@ -1025,7 +1025,7 @@ {"shape":"ObjectAlreadyInActiveTierError"} ], "documentationUrl":"http://docs.amazonwebservices.com/AmazonS3/latest/API/RESTObjectRestore.html", - "documentation":"Restores an archived copy of an object back into Amazon S3
This action is not supported by Amazon S3 on Outposts.
This action performs the following types of requests:
select - Perform a select query on an archived object
restore an archive - Restore an archived object
To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon Simple Storage Service Developer Guide.
Querying Archives with Select Requests
You use a select type of request to perform SQL queries on archived objects. The archived objects that are being queried by the select request must be formatted as uncompressed comma-separated values (CSV) files. You can run queries and custom analytics on your archived data without having to restore your data to a hotter Amazon S3 tier. For an overview about select requests, see Querying Archived Objects in the Amazon Simple Storage Service Developer Guide.
When making a select request, do the following:
Define an output location for the select query's output. This must be an Amazon S3 bucket in the same AWS Region as the bucket that contains the archive object that is being queried. The AWS account that initiates the job must have permissions to write to the S3 bucket. You can specify the storage class and encryption for the output objects stored in the bucket. For more information about output, see Querying Archived Objects in the Amazon Simple Storage Service Developer Guide.
For more information about the S3 structure in the request body, see the following:
Managing Access with ACLs in the Amazon Simple Storage Service Developer Guide
Protecting Data Using Server-Side Encryption in the Amazon Simple Storage Service Developer Guide
Define the SQL expression for the SELECT type of restoration for your query in the request body's SelectParameters structure. You can use expressions like the following examples.
The following expression returns all records from the specified object.
SELECT * FROM Object
Assuming that you are not using any headers for data stored in the object, you can specify columns with positional headers.
SELECT s._1, s._2 FROM Object s WHERE s._3 > 100
If you have headers and you set the fileHeaderInfo in the CSV structure in the request body to USE, you can specify headers in the query. (If you set the fileHeaderInfo field to IGNORE, the first row is skipped for the query.) You cannot mix ordinal positions with header column names.
SELECT s.Id, s.FirstName, s.SSN FROM S3Object s
For more information about using SQL with S3 Glacier Select restore, see SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon Simple Storage Service Developer Guide.
When making a select request, you can also do the following:
To expedite your queries, specify the Expedited tier. For more information about tiers, see \"Restoring Archives,\" later in this topic.
Specify details about the data serialization format of both the input object that is being queried and the serialization of the CSV-encoded query results.
The following are additional important facts about the select feature:
The output results are new Amazon S3 objects. Unlike archive retrievals, they are stored until explicitly deleted-manually or through a lifecycle policy.
You can issue more than one select request on the same Amazon S3 object. Amazon S3 doesn't deduplicate requests, so avoid issuing duplicate requests.
Amazon S3 accepts a select request even if the object has already been restored. A select request doesn’t return error response 409.
Restoring objects
Objects that you archive to the S3 Glacier or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers are not accessible in real time. For objects in Archive Access or Deep Archive Access tiers you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. For objects in S3 Glacier or S3 Glacier Deep Archive storage classes you must first initiate a restore request, and then wait until a temporary copy of the object is available. To access an archived object, you must restore the object for the duration (number of days) that you specify.
To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version.
When restoring an archived object (or using a select request), you can specify one of the following data access tier options in the Tier element of the request body:
Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for a subset of archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.
Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.
Bulk - Bulk retrievals are the lowest-cost retrieval option in S3 Glacier, enabling you to retrieve large amounts, even petabytes, of data inexpensively. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Bulk retrievals are free for objects stored in S3 Intelligent-Tiering.
For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon Simple Storage Service Developer Guide.
You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see Upgrading the speed of an in-progress restore in the Amazon Simple Storage Service Developer Guide.
To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon Simple Storage Service Developer Guide.
After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object.
If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon Simple Storage Service Developer Guide.
Responses
A successful operation returns either the 200 OK or 202 Accepted status code.
If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.
If the object is previously restored, Amazon S3 returns 200 OK in the response.
Special Errors
Code: RestoreAlreadyInProgress
Cause: Object restore is already in progress. (This error does not apply to SELECT type requests.)
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: GlacierExpeditedRetrievalNotAvailable
Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)
HTTP Status Code: 503
SOAP Fault Code Prefix: N/A
Related Resources
SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon Simple Storage Service Developer Guide
Restores an archived copy of an object back into Amazon S3
This action is not supported by Amazon S3 on Outposts.
This action performs the following types of requests:
select - Perform a select query on an archived object
restore an archive - Restore an archived object
To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon Simple Storage Service User Guide.
Querying Archives with Select Requests
You use a select type of request to perform SQL queries on archived objects. The archived objects that are being queried by the select request must be formatted as uncompressed comma-separated values (CSV) files. You can run queries and custom analytics on your archived data without having to restore your data to a hotter Amazon S3 tier. For an overview about select requests, see Querying Archived Objects in the Amazon Simple Storage Service User Guide.
When making a select request, do the following:
Define an output location for the select query's output. This must be an Amazon S3 bucket in the same AWS Region as the bucket that contains the archive object that is being queried. The AWS account that initiates the job must have permissions to write to the S3 bucket. You can specify the storage class and encryption for the output objects stored in the bucket. For more information about output, see Querying Archived Objects in the Amazon Simple Storage Service User Guide.
For more information about the S3 structure in the request body, see the following:
Managing Access with ACLs in the Amazon Simple Storage Service User Guide
Protecting Data Using Server-Side Encryption in the Amazon Simple Storage Service User Guide
Define the SQL expression for the SELECT type of restoration for your query in the request body's SelectParameters structure. You can use expressions like the following examples.
The following expression returns all records from the specified object.
SELECT * FROM Object
Assuming that you are not using any headers for data stored in the object, you can specify columns with positional headers.
SELECT s._1, s._2 FROM Object s WHERE s._3 > 100
If you have headers and you set the fileHeaderInfo in the CSV structure in the request body to USE, you can specify headers in the query. (If you set the fileHeaderInfo field to IGNORE, the first row is skipped for the query.) You cannot mix ordinal positions with header column names.
SELECT s.Id, s.FirstName, s.SSN FROM S3Object s
For more information about using SQL with S3 Glacier Select restore, see SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon Simple Storage Service User Guide.
When making a select request, you can also do the following:
To expedite your queries, specify the Expedited tier. For more information about tiers, see \"Restoring Archives,\" later in this topic.
Specify details about the data serialization format of both the input object that is being queried and the serialization of the CSV-encoded query results.
The following are additional important facts about the select feature:
The output results are new Amazon S3 objects. Unlike archive retrievals, they are stored until explicitly deleted-manually or through a lifecycle policy.
You can issue more than one select request on the same Amazon S3 object. Amazon S3 doesn't deduplicate requests, so avoid issuing duplicate requests.
Amazon S3 accepts a select request even if the object has already been restored. A select request doesn’t return error response 409.
Restoring objects
Objects that you archive to the S3 Glacier or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers are not accessible in real time. For objects in Archive Access or Deep Archive Access tiers you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. For objects in S3 Glacier or S3 Glacier Deep Archive storage classes you must first initiate a restore request, and then wait until a temporary copy of the object is available. To access an archived object, you must restore the object for the duration (number of days) that you specify.
To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version.
When restoring an archived object (or using a select request), you can specify one of the following data access tier options in the Tier element of the request body:
Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for a subset of archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.
Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.
Bulk - Bulk retrievals are the lowest-cost retrieval option in S3 Glacier, enabling you to retrieve large amounts, even petabytes, of data inexpensively. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Bulk retrievals are free for objects stored in S3 Intelligent-Tiering.
For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon Simple Storage Service User Guide.
You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see Upgrading the speed of an in-progress restore in the Amazon Simple Storage Service User Guide.
To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon Simple Storage Service User Guide.
After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object.
If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon Simple Storage Service User Guide.
Responses
A successful action returns either the 200 OK or 202 Accepted status code.
If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.
If the object is previously restored, Amazon S3 returns 200 OK in the response.
Special Errors
Code: RestoreAlreadyInProgress
Cause: Object restore is already in progress. (This error does not apply to SELECT type requests.)
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: GlacierExpeditedRetrievalNotAvailable
Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)
HTTP Status Code: 503
SOAP Fault Code Prefix: N/A
Related Resources
SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon Simple Storage Service User Guide
This operation filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response.
This action is not supported by Amazon S3 on Outposts.
For more information about Amazon S3 Select, see Selecting Content from Objects in the Amazon Simple Storage Service Developer Guide.
For more information about using SQL with Amazon S3 Select, see SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon Simple Storage Service Developer Guide.
Permissions
You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon Simple Storage Service Developer Guide.
Object Data Formats
You can use Amazon S3 Select to query objects that have the following format properties:
CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.
UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.
GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.
Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption.
For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon Simple Storage Service Developer Guide.
For objects that are encrypted with Amazon S3 managed encryption keys (SSE-S3) and customer master keys (CMKs) stored in AWS Key Management Service (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon Simple Storage Service Developer Guide.
Working with the Response Body
Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response .
GetObject Support
The SelectObjectContent operation does not support the following GetObject functionality. For more information, see GetObject.
Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.
GLACIER, DEEP_ARCHIVE and REDUCED_REDUNDANCY storage classes: You cannot specify the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes. For more information, about storage classes see Storage Classes in the Amazon Simple Storage Service Developer Guide.
Special Errors
For a list of special errors for this operation, see List of SELECT Object Content Error Codes
Related Resources
" + "documentation":"This action filters the contents of an Amazon S3 object based on a simple structured query language (SQL) statement. In the request, along with the SQL expression, you must also specify a data serialization format (JSON, CSV, or Apache Parquet) of the object. Amazon S3 uses this format to parse object data into records, and returns only records that match the specified SQL expression. You must also specify the data serialization format for the response.
This action is not supported by Amazon S3 on Outposts.
For more information about Amazon S3 Select, see Selecting Content from Objects in the Amazon Simple Storage Service User Guide.
For more information about using SQL with Amazon S3 Select, see SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon Simple Storage Service User Guide.
Permissions
You must have s3:GetObject permission for this operation. Amazon S3 Select does not support anonymous access. For more information about permissions, see Specifying Permissions in a Policy in the Amazon Simple Storage Service User Guide.
Object Data Formats
You can use Amazon S3 Select to query objects that have the following format properties:
CSV, JSON, and Parquet - Objects must be in CSV, JSON, or Parquet format.
UTF-8 - UTF-8 is the only encoding type Amazon S3 Select supports.
GZIP or BZIP2 - CSV and JSON files can be compressed using GZIP or BZIP2. GZIP and BZIP2 are the only compression formats that Amazon S3 Select supports for CSV and JSON files. Amazon S3 Select supports columnar compression for Parquet using GZIP or Snappy. Amazon S3 Select does not support whole-object compression for Parquet objects.
Server-side encryption - Amazon S3 Select supports querying objects that are protected with server-side encryption.
For objects that are encrypted with customer-provided encryption keys (SSE-C), you must use HTTPS, and you must use the headers that are documented in the GetObject. For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys) in the Amazon Simple Storage Service User Guide.
For objects that are encrypted with Amazon S3 managed encryption keys (SSE-S3) and customer master keys (CMKs) stored in AWS Key Management Service (SSE-KMS), server-side encryption is handled transparently, so you don't need to specify anything. For more information about server-side encryption, including SSE-S3 and SSE-KMS, see Protecting Data Using Server-Side Encryption in the Amazon Simple Storage Service User Guide.
Working with the Response Body
Given the response size is unknown, Amazon S3 Select streams the response as a series of messages and includes a Transfer-Encoding header with chunked as its value in the response. For more information, see Appendix: SelectObjectContent Response .
GetObject Support
The SelectObjectContent action does not support the following GetObject functionality. For more information, see GetObject.
Range: Although you can specify a scan range for an Amazon S3 Select request (see SelectObjectContentRequest - ScanRange in the request parameters), you cannot specify the range of bytes of an object to return.
GLACIER, DEEP_ARCHIVE and REDUCED_REDUNDANCY storage classes: You cannot specify the GLACIER, DEEP_ARCHIVE, or REDUCED_REDUNDANCY storage classes. For more information, about storage classes see Storage Classes in the Amazon Simple Storage Service User Guide.
Special Errors
For a list of special errors for this operation, see List of SELECT Object Content Error Codes
Related Resources
" }, "UploadPart":{ "name":"UploadPart", @@ -1051,7 +1051,7 @@ "input":{"shape":"UploadPartRequest"}, "output":{"shape":"UploadPartOutput"}, "documentationUrl":"http://docs.amazonwebservices.com/AmazonS3/latest/API/mpUploadUploadPart.html", - "documentation":"Uploads a part in a multipart upload.
In this operation, you provide part data in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.
You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier, that you must include in your upload part request.
Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten. Each part must be at least 5 MB in size, except the last part. There is no size limit on the last part of your multipart upload.
To ensure that data is not corrupted when traversing the network, specify the Content-MD5 header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error.
If the upload request is signed with Signature Version 4, then AWS S3 uses the x-amz-content-sha256 header as a checksum instead of Content-MD5. For more information see Authenticating Requests: Using the Authorization Header (AWS Signature Version 4).
Note: After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.
For more information on multipart uploads, go to Multipart Upload Overview in the Amazon Simple Storage Service Developer Guide .
For information on the permissions required to use the multipart upload API, go to Multipart Upload API and Permissions in the Amazon Simple Storage Service Developer Guide.
You can optionally request server-side encryption where Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it for you when you access it. You have the option of providing your own encryption key, or you can use the AWS managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in the request must match the headers you used in the request to initiate the upload by using CreateMultipartUpload. For more information, go to Using Server-Side Encryption in the Amazon Simple Storage Service Developer Guide.
Server-side encryption is supported by the S3 Multipart Upload actions. Unless you are using a customer-provided encryption key, you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload.
If you requested server-side encryption using a customer-provided encryption key in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following headers.
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
Special Errors
Code: NoSuchUpload
Cause: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Related Resources
" + "documentation":"Uploads a part in a multipart upload.
In this operation, you provide part data in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.
You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier, that you must include in your upload part request.
Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten. Each part must be at least 5 MB in size, except the last part. There is no size limit on the last part of your multipart upload.
To ensure that data is not corrupted when traversing the network, specify the Content-MD5 header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error.
If the upload request is signed with Signature Version 4, then AWS S3 uses the x-amz-content-sha256 header as a checksum instead of Content-MD5. For more information see Authenticating Requests: Using the Authorization Header (AWS Signature Version 4).
Note: After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.
For more information on multipart uploads, go to Multipart Upload Overview in the Amazon Simple Storage Service User Guide .
For information on the permissions required to use the multipart upload API, go to Multipart Upload and Permissions in the Amazon Simple Storage Service User Guide.
You can optionally request server-side encryption where Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it for you when you access it. You have the option of providing your own encryption key, or you can use the AWS managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in the request must match the headers you used in the request to initiate the upload by using CreateMultipartUpload. For more information, go to Using Server-Side Encryption in the Amazon Simple Storage Service User Guide.
Server-side encryption is supported by the S3 Multipart Upload actions. Unless you are using a customer-provided encryption key, you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload.
If you requested server-side encryption using a customer-provided encryption key in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following headers.
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
Special Errors
Code: NoSuchUpload
Cause: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Related Resources
" }, "UploadPartCopy":{ "name":"UploadPartCopy", @@ -1062,7 +1062,7 @@ "input":{"shape":"UploadPartCopyRequest"}, "output":{"shape":"UploadPartCopyOutput"}, "documentationUrl":"http://docs.amazonwebservices.com/AmazonS3/latest/API/mpUploadUploadPartCopy.html", - "documentation":"Uploads a part by copying data from an existing object as data source. You specify the data source by adding the request header x-amz-copy-source in your request and a byte range by adding the request header x-amz-copy-source-range in your request.
The minimum allowable part size for a multipart upload is 5 MB. For more information about multipart upload limits, go to Quick Facts in the Amazon Simple Storage Service Developer Guide.
Instead of using an existing object as part data, you might use the UploadPart operation and provide data in your request.
You must initiate a multipart upload before you can upload any part. In response to your initiate request. Amazon S3 returns a unique identifier, the upload ID, that you must include in your upload part request.
For more information about using the UploadPartCopy operation, see the following:
For conceptual information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon Simple Storage Service Developer Guide.
For information about permissions required to use the multipart upload API, see Multipart Upload API and Permissions in the Amazon Simple Storage Service Developer Guide.
For information about copying objects using a single atomic operation vs. the multipart upload, see Operations on Objects in the Amazon Simple Storage Service Developer Guide.
For information about using server-side encryption with customer-provided encryption keys with the UploadPartCopy operation, see CopyObject and UploadPart.
Note the following additional considerations about the request headers x-amz-copy-source-if-match, x-amz-copy-source-if-none-match, x-amz-copy-source-if-unmodified-since, and x-amz-copy-source-if-modified-since:
Consideration 1 - If both of the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request as follows:
x-amz-copy-source-if-match condition evaluates to true, and;
x-amz-copy-source-if-unmodified-since condition evaluates to false;
Amazon S3 returns 200 OK and copies the data.
Consideration 2 - If both of the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request as follows:
x-amz-copy-source-if-none-match condition evaluates to false, and;
x-amz-copy-source-if-modified-since condition evaluates to true;
Amazon S3 returns 412 Precondition Failed response code.
Versioning
If your bucket has versioning enabled, you could have multiple versions of the same object. By default, x-amz-copy-source identifies the current version of the object to copy. If the current version is a delete marker and you don't specify a versionId in the x-amz-copy-source, Amazon S3 returns a 404 error, because the object does not exist. If you specify versionId in the x-amz-copy-source and the versionId is a delete marker, Amazon S3 returns an HTTP 400 error, because you are not allowed to specify a delete marker as a version for the x-amz-copy-source.
You can optionally specify a specific version of the source object to copy by adding the versionId subresource as shown in the following example:
x-amz-copy-source: /bucket/object?versionId=version id
Special Errors
Code: NoSuchUpload
Cause: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
HTTP Status Code: 404 Not Found
Code: InvalidRequest
Cause: The specified copy source is not supported as a byte-range copy source.
HTTP Status Code: 400 Bad Request
Related Resources
Uploads a part by copying data from an existing object as data source. You specify the data source by adding the request header x-amz-copy-source in your request and a byte range by adding the request header x-amz-copy-source-range in your request.
The minimum allowable part size for a multipart upload is 5 MB. For more information about multipart upload limits, go to Quick Facts in the Amazon Simple Storage Service User Guide.
Instead of using an existing object as part data, you might use the UploadPart action and provide data in your request.
You must initiate a multipart upload before you can upload any part. In response to your initiate request. Amazon S3 returns a unique identifier, the upload ID, that you must include in your upload part request.
For more information about using the UploadPartCopy operation, see the following:
For conceptual information about multipart uploads, see Uploading Objects Using Multipart Upload in the Amazon Simple Storage Service User Guide.
For information about permissions required to use the multipart upload API, see Multipart Upload and Permissions in the Amazon Simple Storage Service User Guide.
For information about copying objects using a single atomic action vs. the multipart upload, see Operations on Objects in the Amazon Simple Storage Service User Guide.
For information about using server-side encryption with customer-provided encryption keys with the UploadPartCopy operation, see CopyObject and UploadPart.
Note the following additional considerations about the request headers x-amz-copy-source-if-match, x-amz-copy-source-if-none-match, x-amz-copy-source-if-unmodified-since, and x-amz-copy-source-if-modified-since:
Consideration 1 - If both of the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request as follows:
x-amz-copy-source-if-match condition evaluates to true, and;
x-amz-copy-source-if-unmodified-since condition evaluates to false;
Amazon S3 returns 200 OK and copies the data.
Consideration 2 - If both of the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request as follows:
x-amz-copy-source-if-none-match condition evaluates to false, and;
x-amz-copy-source-if-modified-since condition evaluates to true;
Amazon S3 returns 412 Precondition Failed response code.
Versioning
If your bucket has versioning enabled, you could have multiple versions of the same object. By default, x-amz-copy-source identifies the current version of the object to copy. If the current version is a delete marker and you don't specify a versionId in the x-amz-copy-source, Amazon S3 returns a 404 error, because the object does not exist. If you specify versionId in the x-amz-copy-source and the versionId is a delete marker, Amazon S3 returns an HTTP 400 error, because you are not allowed to specify a delete marker as a version for the x-amz-copy-source.
You can optionally specify a specific version of the source object to copy by adding the versionId subresource as shown in the following example:
x-amz-copy-source: /bucket/object?versionId=version id
Special Errors
Code: NoSuchUpload
Cause: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
HTTP Status Code: 404 Not Found
Code: InvalidRequest
Cause: The specified copy source is not supported as a byte-range copy source.
HTTP Status Code: 400 Bad Request
Related Resources
The bucket name to which the upload was taking place.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name to which the upload was taking place.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -1580,7 +1580,7 @@ }, "Bucket":{ "shape":"BucketName", - "documentation":"The name of the bucket that contains the newly created object.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
" + "documentation":"The name of the bucket that contains the newly created object.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
" }, "Key":{ "shape":"ObjectKey", @@ -1825,7 +1825,7 @@ }, "Bucket":{ "shape":"BucketName", - "documentation":"The name of the destination bucket.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The name of the destination bucket.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -1993,7 +1993,7 @@ }, "BucketKeyEnabled":{ "shape":"BucketKeyEnabled", - "documentation":"Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with a COPY operation doesn’t affect bucket-level settings for S3 Bucket Key.
", + "documentation":"Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.
", "location":"header", "locationName":"x-amz-server-side-encryption-bucket-key-enabled" }, @@ -2201,7 +2201,7 @@ }, "Bucket":{ "shape":"BucketName", - "documentation":"The name of the bucket to which the multipart upload was initiated.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The name of the bucket to which the multipart upload was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "locationName":"Bucket" }, "Key":{ @@ -2270,7 +2270,7 @@ }, "Bucket":{ "shape":"BucketName", - "documentation":"The name of the bucket to which to initiate the upload
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The name of the bucket to which to initiate the upload
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -2384,7 +2384,7 @@ }, "SSEKMSKeyId":{ "shape":"SSEKMSKeyId", - "documentation":"Specifies the ID of the symmetric customer managed AWS KMS CMK to use for object encryption. All GET and PUT requests for an object protected by AWS KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported AWS SDKs and AWS CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 Developer Guide.
", + "documentation":"Specifies the ID of the symmetric customer managed AWS KMS CMK to use for object encryption. All GET and PUT requests for an object protected by AWS KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported AWS SDKs and AWS CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 Developer Guide.
", "location":"header", "locationName":"x-amz-server-side-encryption-aws-kms-key-id" }, @@ -2396,7 +2396,7 @@ }, "BucketKeyEnabled":{ "shape":"BucketKeyEnabled", - "documentation":"Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with an object operation doesn’t affect bucket-level settings for S3 Bucket Key.
", + "documentation":"Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.
", "location":"header", "locationName":"x-amz-server-side-encryption-bucket-key-enabled" }, @@ -2823,7 +2823,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name of the bucket containing the object.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name of the bucket containing the object.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -2884,7 +2884,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name containing the objects from which to remove the tags.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name containing the objects from which to remove the tags.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -2922,7 +2922,7 @@ }, "Errors":{ "shape":"Errors", - "documentation":"Container for a failed delete operation that describes the object that Amazon S3 attempted to delete and the error it encountered.
", + "documentation":"Container for a failed delete action that describes the object that Amazon S3 attempted to delete and the error it encountered.
", "locationName":"Error" } } @@ -2936,7 +2936,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name containing the objects to delete.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name containing the objects to delete.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -3113,7 +3113,7 @@ }, "Code":{ "shape":"Code", - "documentation":"The error code is a string that uniquely identifies an error condition. It is meant to be read and understood by programs that detect and handle errors by type.
Amazon S3 error codes
Code: AccessDenied
Description: Access Denied
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: AccountProblem
Description: There is a problem with your AWS account that prevents the operation from completing successfully. Contact AWS Support for further assistance.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: AllAccessDisabled
Description: All access to this Amazon S3 resource has been disabled. Contact AWS Support for further assistance.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: AmbiguousGrantByEmailAddress
Description: The email address you provided is associated with more than one account.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: AuthorizationHeaderMalformed
Description: The authorization header you provided is invalid.
HTTP Status Code: 400 Bad Request
HTTP Status Code: N/A
Code: BadDigest
Description: The Content-MD5 you specified did not match what we received.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: BucketAlreadyExists
Description: The requested bucket name is not available. The bucket namespace is shared by all users of the system. Please select a different name and try again.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: BucketAlreadyOwnedByYou
Description: The bucket you tried to create already exists, and you own it. Amazon S3 returns this error in all AWS Regions except in the North Virginia Region. For legacy compatibility, if you re-create an existing bucket that you already own in the North Virginia Region, Amazon S3 returns 200 OK and resets the bucket access control lists (ACLs).
Code: 409 Conflict (in all Regions except the North Virginia Region)
SOAP Fault Code Prefix: Client
Code: BucketNotEmpty
Description: The bucket you tried to delete is not empty.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: CredentialsNotSupported
Description: This request does not support credentials.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: CrossLocationLoggingProhibited
Description: Cross-location logging not allowed. Buckets in one geographic location cannot log information to a bucket in another location.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: EntityTooSmall
Description: Your proposed upload is smaller than the minimum allowed object size.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: EntityTooLarge
Description: Your proposed upload exceeds the maximum allowed object size.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: ExpiredToken
Description: The provided token has expired.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: IllegalVersioningConfigurationException
Description: Indicates that the versioning configuration specified in the request is invalid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: IncompleteBody
Description: You did not provide the number of bytes specified by the Content-Length HTTP header
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: IncorrectNumberOfFilesInPostRequest
Description: POST requires exactly one file upload per request.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InlineDataTooLarge
Description: Inline data exceeds the maximum allowed size.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InternalError
Description: We encountered an internal error. Please try again.
HTTP Status Code: 500 Internal Server Error
SOAP Fault Code Prefix: Server
Code: InvalidAccessKeyId
Description: The AWS access key ID you provided does not exist in our records.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: InvalidAddressingHeader
Description: You must specify the Anonymous role.
HTTP Status Code: N/A
SOAP Fault Code Prefix: Client
Code: InvalidArgument
Description: Invalid Argument
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidBucketName
Description: The specified bucket is not valid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidBucketState
Description: The request is not valid with the current state of the bucket.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: InvalidDigest
Description: The Content-MD5 you specified is not valid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidEncryptionAlgorithmError
Description: The encryption request you specified is not valid. The valid value is AES256.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidLocationConstraint
Description: The specified location constraint is not valid. For more information about Regions, see How to Select a Region for Your Buckets.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidObjectState
Description: The operation is not valid for the current state of the object.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: InvalidPart
Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidPartOrder
Description: The list of parts was not in ascending order. Parts list must be specified in order by part number.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidPayer
Description: All access to this object has been disabled. Please contact AWS Support for further assistance.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: InvalidPolicyDocument
Description: The content of the form does not meet the conditions specified in the policy document.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidRange
Description: The requested range cannot be satisfied.
HTTP Status Code: 416 Requested Range Not Satisfiable
SOAP Fault Code Prefix: Client
Code: InvalidRequest
Description: Please use AWS4-HMAC-SHA256.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: SOAP requests must be made over an HTTPS connection.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidRequest
Description: Amazon S3 Transfer Acceleration is not supported for buckets with non-DNS compliant names.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Acceleration is not supported for buckets with periods (.) in their names.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Accelerate endpoint only supports virtual style requests.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Accelerate is not configured on this bucket.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Accelerate is disabled on this bucket.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Acceleration is not supported on this bucket. Contact AWS Support for more information.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Acceleration cannot be enabled on this bucket. Contact AWS Support for more information.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidSecurity
Description: The provided security credentials are not valid.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: InvalidSOAPRequest
Description: The SOAP request body is invalid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidStorageClass
Description: The storage class you specified is not valid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidTargetBucketForLogging
Description: The target bucket for logging does not exist, is not owned by you, or does not have the appropriate grants for the log-delivery group.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidToken
Description: The provided token is malformed or otherwise invalid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidURI
Description: Couldn't parse the specified URI.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: KeyTooLongError
Description: Your key is too long.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MalformedACLError
Description: The XML you provided was not well-formed or did not validate against our published schema.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MalformedPOSTRequest
Description: The body of your POST request is not well-formed multipart/form-data.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MalformedXML
Description: This happens when the user sends malformed XML (XML that doesn't conform to the published XSD) for the configuration. The error message is, \"The XML you provided was not well-formed or did not validate against our published schema.\"
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MaxMessageLengthExceeded
Description: Your request was too big.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MaxPostPreDataLengthExceededError
Description: Your POST request fields preceding the upload file were too large.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MetadataTooLarge
Description: Your metadata headers exceed the maximum allowed metadata size.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MethodNotAllowed
Description: The specified method is not allowed against this resource.
HTTP Status Code: 405 Method Not Allowed
SOAP Fault Code Prefix: Client
Code: MissingAttachment
Description: A SOAP attachment was expected, but none were found.
HTTP Status Code: N/A
SOAP Fault Code Prefix: Client
Code: MissingContentLength
Description: You must provide the Content-Length HTTP header.
HTTP Status Code: 411 Length Required
SOAP Fault Code Prefix: Client
Code: MissingRequestBodyError
Description: This happens when the user sends an empty XML document as a request. The error message is, \"Request body is empty.\"
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MissingSecurityElement
Description: The SOAP 1.1 request is missing a security element.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MissingSecurityHeader
Description: Your request is missing a required header.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: NoLoggingStatusForKey
Description: There is no such thing as a logging status subresource for a key.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: NoSuchBucket
Description: The specified bucket does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchBucketPolicy
Description: The specified bucket does not have a bucket policy.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchKey
Description: The specified key does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchLifecycleConfiguration
Description: The lifecycle configuration does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchUpload
Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchVersion
Description: Indicates that the version ID specified in the request does not match an existing version.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NotImplemented
Description: A header you provided implies functionality that is not implemented.
HTTP Status Code: 501 Not Implemented
SOAP Fault Code Prefix: Server
Code: NotSignedUp
Description: Your account is not signed up for the Amazon S3 service. You must sign up before you can use Amazon S3. You can sign up at the following URL: https://aws.amazon.com/s3
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: OperationAborted
Description: A conflicting conditional operation is currently in progress against this resource. Try again.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: PermanentRedirect
Description: The bucket you are attempting to access must be addressed using the specified endpoint. Send all future requests to this endpoint.
HTTP Status Code: 301 Moved Permanently
SOAP Fault Code Prefix: Client
Code: PreconditionFailed
Description: At least one of the preconditions you specified did not hold.
HTTP Status Code: 412 Precondition Failed
SOAP Fault Code Prefix: Client
Code: Redirect
Description: Temporary redirect.
HTTP Status Code: 307 Moved Temporarily
SOAP Fault Code Prefix: Client
Code: RestoreAlreadyInProgress
Description: Object restore is already in progress.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: RequestIsNotMultiPartContent
Description: Bucket POST must be of the enclosure-type multipart/form-data.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: RequestTimeout
Description: Your socket connection to the server was not read from or written to within the timeout period.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: RequestTimeTooSkewed
Description: The difference between the request time and the server's time is too large.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: RequestTorrentOfBucketError
Description: Requesting the torrent file of a bucket is not permitted.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: SignatureDoesNotMatch
Description: The request signature we calculated does not match the signature you provided. Check your AWS secret access key and signing method. For more information, see REST Authentication and SOAP Authentication for details.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: ServiceUnavailable
Description: Reduce your request rate.
HTTP Status Code: 503 Service Unavailable
SOAP Fault Code Prefix: Server
Code: SlowDown
Description: Reduce your request rate.
HTTP Status Code: 503 Slow Down
SOAP Fault Code Prefix: Server
Code: TemporaryRedirect
Description: You are being redirected to the bucket while DNS updates.
HTTP Status Code: 307 Moved Temporarily
SOAP Fault Code Prefix: Client
Code: TokenRefreshRequired
Description: The provided token must be refreshed.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: TooManyBuckets
Description: You have attempted to create more buckets than allowed.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: UnexpectedContent
Description: This request does not support content.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: UnresolvableGrantByEmailAddress
Description: The email address you provided does not match any account on record.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: UserKeyMustBeSpecified
Description: The bucket POST must contain the specified field name. If it is specified, check the order of the fields.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
The error code is a string that uniquely identifies an error condition. It is meant to be read and understood by programs that detect and handle errors by type.
Amazon S3 error codes
Code: AccessDenied
Description: Access Denied
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: AccountProblem
Description: There is a problem with your AWS account that prevents the action from completing successfully. Contact AWS Support for further assistance.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: AllAccessDisabled
Description: All access to this Amazon S3 resource has been disabled. Contact AWS Support for further assistance.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: AmbiguousGrantByEmailAddress
Description: The email address you provided is associated with more than one account.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: AuthorizationHeaderMalformed
Description: The authorization header you provided is invalid.
HTTP Status Code: 400 Bad Request
HTTP Status Code: N/A
Code: BadDigest
Description: The Content-MD5 you specified did not match what we received.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: BucketAlreadyExists
Description: The requested bucket name is not available. The bucket namespace is shared by all users of the system. Please select a different name and try again.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: BucketAlreadyOwnedByYou
Description: The bucket you tried to create already exists, and you own it. Amazon S3 returns this error in all AWS Regions except in the North Virginia Region. For legacy compatibility, if you re-create an existing bucket that you already own in the North Virginia Region, Amazon S3 returns 200 OK and resets the bucket access control lists (ACLs).
Code: 409 Conflict (in all Regions except the North Virginia Region)
SOAP Fault Code Prefix: Client
Code: BucketNotEmpty
Description: The bucket you tried to delete is not empty.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: CredentialsNotSupported
Description: This request does not support credentials.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: CrossLocationLoggingProhibited
Description: Cross-location logging not allowed. Buckets in one geographic location cannot log information to a bucket in another location.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: EntityTooSmall
Description: Your proposed upload is smaller than the minimum allowed object size.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: EntityTooLarge
Description: Your proposed upload exceeds the maximum allowed object size.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: ExpiredToken
Description: The provided token has expired.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: IllegalVersioningConfigurationException
Description: Indicates that the versioning configuration specified in the request is invalid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: IncompleteBody
Description: You did not provide the number of bytes specified by the Content-Length HTTP header
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: IncorrectNumberOfFilesInPostRequest
Description: POST requires exactly one file upload per request.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InlineDataTooLarge
Description: Inline data exceeds the maximum allowed size.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InternalError
Description: We encountered an internal error. Please try again.
HTTP Status Code: 500 Internal Server Error
SOAP Fault Code Prefix: Server
Code: InvalidAccessKeyId
Description: The AWS access key ID you provided does not exist in our records.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: InvalidAddressingHeader
Description: You must specify the Anonymous role.
HTTP Status Code: N/A
SOAP Fault Code Prefix: Client
Code: InvalidArgument
Description: Invalid Argument
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidBucketName
Description: The specified bucket is not valid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidBucketState
Description: The request is not valid with the current state of the bucket.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: InvalidDigest
Description: The Content-MD5 you specified is not valid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidEncryptionAlgorithmError
Description: The encryption request you specified is not valid. The valid value is AES256.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidLocationConstraint
Description: The specified location constraint is not valid. For more information about Regions, see How to Select a Region for Your Buckets.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidObjectState
Description: The action is not valid for the current state of the object.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: InvalidPart
Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidPartOrder
Description: The list of parts was not in ascending order. Parts list must be specified in order by part number.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidPayer
Description: All access to this object has been disabled. Please contact AWS Support for further assistance.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: InvalidPolicyDocument
Description: The content of the form does not meet the conditions specified in the policy document.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidRange
Description: The requested range cannot be satisfied.
HTTP Status Code: 416 Requested Range Not Satisfiable
SOAP Fault Code Prefix: Client
Code: InvalidRequest
Description: Please use AWS4-HMAC-SHA256.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: SOAP requests must be made over an HTTPS connection.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidRequest
Description: Amazon S3 Transfer Acceleration is not supported for buckets with non-DNS compliant names.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Acceleration is not supported for buckets with periods (.) in their names.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Accelerate endpoint only supports virtual style requests.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Accelerate is not configured on this bucket.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Accelerate is disabled on this bucket.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Acceleration is not supported on this bucket. Contact AWS Support for more information.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidRequest
Description: Amazon S3 Transfer Acceleration cannot be enabled on this bucket. Contact AWS Support for more information.
HTTP Status Code: 400 Bad Request
Code: N/A
Code: InvalidSecurity
Description: The provided security credentials are not valid.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: InvalidSOAPRequest
Description: The SOAP request body is invalid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidStorageClass
Description: The storage class you specified is not valid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidTargetBucketForLogging
Description: The target bucket for logging does not exist, is not owned by you, or does not have the appropriate grants for the log-delivery group.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidToken
Description: The provided token is malformed or otherwise invalid.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: InvalidURI
Description: Couldn't parse the specified URI.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: KeyTooLongError
Description: Your key is too long.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MalformedACLError
Description: The XML you provided was not well-formed or did not validate against our published schema.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MalformedPOSTRequest
Description: The body of your POST request is not well-formed multipart/form-data.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MalformedXML
Description: This happens when the user sends malformed XML (XML that doesn't conform to the published XSD) for the configuration. The error message is, \"The XML you provided was not well-formed or did not validate against our published schema.\"
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MaxMessageLengthExceeded
Description: Your request was too big.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MaxPostPreDataLengthExceededError
Description: Your POST request fields preceding the upload file were too large.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MetadataTooLarge
Description: Your metadata headers exceed the maximum allowed metadata size.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MethodNotAllowed
Description: The specified method is not allowed against this resource.
HTTP Status Code: 405 Method Not Allowed
SOAP Fault Code Prefix: Client
Code: MissingAttachment
Description: A SOAP attachment was expected, but none were found.
HTTP Status Code: N/A
SOAP Fault Code Prefix: Client
Code: MissingContentLength
Description: You must provide the Content-Length HTTP header.
HTTP Status Code: 411 Length Required
SOAP Fault Code Prefix: Client
Code: MissingRequestBodyError
Description: This happens when the user sends an empty XML document as a request. The error message is, \"Request body is empty.\"
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MissingSecurityElement
Description: The SOAP 1.1 request is missing a security element.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: MissingSecurityHeader
Description: Your request is missing a required header.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: NoLoggingStatusForKey
Description: There is no such thing as a logging status subresource for a key.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: NoSuchBucket
Description: The specified bucket does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchBucketPolicy
Description: The specified bucket does not have a bucket policy.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchKey
Description: The specified key does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchLifecycleConfiguration
Description: The lifecycle configuration does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchUpload
Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NoSuchVersion
Description: Indicates that the version ID specified in the request does not match an existing version.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
Code: NotImplemented
Description: A header you provided implies functionality that is not implemented.
HTTP Status Code: 501 Not Implemented
SOAP Fault Code Prefix: Server
Code: NotSignedUp
Description: Your account is not signed up for the Amazon S3 service. You must sign up before you can use Amazon S3. You can sign up at the following URL: https://aws.amazon.com/s3
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: OperationAborted
Description: A conflicting conditional action is currently in progress against this resource. Try again.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: PermanentRedirect
Description: The bucket you are attempting to access must be addressed using the specified endpoint. Send all future requests to this endpoint.
HTTP Status Code: 301 Moved Permanently
SOAP Fault Code Prefix: Client
Code: PreconditionFailed
Description: At least one of the preconditions you specified did not hold.
HTTP Status Code: 412 Precondition Failed
SOAP Fault Code Prefix: Client
Code: Redirect
Description: Temporary redirect.
HTTP Status Code: 307 Moved Temporarily
SOAP Fault Code Prefix: Client
Code: RestoreAlreadyInProgress
Description: Object restore is already in progress.
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: RequestIsNotMultiPartContent
Description: Bucket POST must be of the enclosure-type multipart/form-data.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: RequestTimeout
Description: Your socket connection to the server was not read from or written to within the timeout period.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: RequestTimeTooSkewed
Description: The difference between the request time and the server's time is too large.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: RequestTorrentOfBucketError
Description: Requesting the torrent file of a bucket is not permitted.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: SignatureDoesNotMatch
Description: The request signature we calculated does not match the signature you provided. Check your AWS secret access key and signing method. For more information, see REST Authentication and SOAP Authentication for details.
HTTP Status Code: 403 Forbidden
SOAP Fault Code Prefix: Client
Code: ServiceUnavailable
Description: Reduce your request rate.
HTTP Status Code: 503 Service Unavailable
SOAP Fault Code Prefix: Server
Code: SlowDown
Description: Reduce your request rate.
HTTP Status Code: 503 Slow Down
SOAP Fault Code Prefix: Server
Code: TemporaryRedirect
Description: You are being redirected to the bucket while DNS updates.
HTTP Status Code: 307 Moved Temporarily
SOAP Fault Code Prefix: Client
Code: TokenRefreshRequired
Description: The provided token must be refreshed.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: TooManyBuckets
Description: You have attempted to create more buckets than allowed.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: UnexpectedContent
Description: This request does not support content.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: UnresolvableGrantByEmailAddress
Description: The email address you provided does not match any account on record.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Code: UserKeyMustBeSpecified
Description: The bucket POST must contain the specified field name. If it is specified, check the order of the fields.
HTTP Status Code: 400 Bad Request
SOAP Fault Code Prefix: Client
Optional configuration to replicate existing source bucket objects. For more information, see Replicating Existing Objects in the Amazon S3 Developer Guide.
" + "documentation":"Optional configuration to replicate existing source bucket objects. For more information, see Replicating Existing Objects in the Amazon S3 Developer Guide.
" }, "ExistingObjectReplicationStatus":{ "type":"string", @@ -3885,7 +3885,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name that contains the object for which to get the ACL information.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name that contains the object for which to get the ACL information.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -3933,7 +3933,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name containing the object whose Legal Hold status you want to retrieve.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name containing the object whose Legal Hold status you want to retrieve.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -3978,7 +3978,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket whose Object Lock configuration you want to retrieve.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket whose Object Lock configuration you want to retrieve.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -4018,7 +4018,7 @@ }, "Restore":{ "shape":"Restore", - "documentation":"Provides information about object restoration operation and expiration time of the restored object copy.
", + "documentation":"Provides information about object restoration action and expiration time of the restored object copy.
", "location":"header", "locationName":"x-amz-restore" }, @@ -4195,7 +4195,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name containing the object.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name containing the object.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -4333,7 +4333,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name containing the object whose retention settings you want to retrieve.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name containing the object whose retention settings you want to retrieve.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -4387,7 +4387,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name containing the object for which to get the tagging information.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name containing the object for which to get the tagging information.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -4568,7 +4568,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -4773,7 +4773,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The name of the bucket containing the object.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The name of the bucket containing the object.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -5590,7 +5590,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The name of the bucket to which the multipart upload was initiated.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The name of the bucket to which the multipart upload was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -5725,7 +5725,7 @@ }, "MaxKeys":{ "shape":"MaxKeys", - "documentation":"Sets the maximum number of keys returned in the response. By default the API returns up to 1,000 key names. The response might contain fewer keys but will never contain more. If additional keys satisfy the search criteria, but were not returned because max-keys was exceeded, the response contains <isTruncated>true</isTruncated>. To return the additional keys, see key-marker and version-id-marker.
", + "documentation":"Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more. If additional keys satisfy the search criteria, but were not returned because max-keys was exceeded, the response contains <isTruncated>true</isTruncated>. To return the additional keys, see key-marker and version-id-marker.
", "location":"querystring", "locationName":"max-keys" }, @@ -5800,7 +5800,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The name of the bucket containing the objects.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The name of the bucket containing the objects.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -5823,7 +5823,7 @@ }, "MaxKeys":{ "shape":"MaxKeys", - "documentation":"Sets the maximum number of keys returned in the response. By default the API returns up to 1,000 key names. The response might contain fewer keys but will never contain more.
", + "documentation":"Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.
", "location":"querystring", "locationName":"max-keys" }, @@ -5860,7 +5860,7 @@ }, "Name":{ "shape":"BucketName", - "documentation":"The bucket name.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
" + "documentation":"The bucket name.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
" }, "Prefix":{ "shape":"Prefix", @@ -5872,7 +5872,7 @@ }, "MaxKeys":{ "shape":"MaxKeys", - "documentation":"Sets the maximum number of keys returned in the response. By default the API returns up to 1,000 key names. The response might contain fewer keys but will never contain more.
" + "documentation":"Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.
" }, "CommonPrefixes":{ "shape":"CommonPrefixList", @@ -5906,7 +5906,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"Bucket name to list.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"Bucket name to list.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -5924,7 +5924,7 @@ }, "MaxKeys":{ "shape":"MaxKeys", - "documentation":"Sets the maximum number of keys returned in the response. By default the API returns up to 1,000 key names. The response might contain fewer keys but will never contain more.
", + "documentation":"Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.
", "location":"querystring", "locationName":"max-keys" }, @@ -6043,7 +6043,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The name of the bucket to which the parts are being uploaded.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The name of the bucket to which the parts are being uploaded.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -6414,7 +6414,7 @@ "type":"structure", "members":{ }, - "documentation":"This operation is not allowed against this storage tier.
", + "documentation":"This action is not allowed against this storage tier.
", "exception":true }, "ObjectCannedACL":{ @@ -6541,7 +6541,7 @@ "type":"structure", "members":{ }, - "documentation":"The source object of the COPY operation is not in the active tier and is only stored in Amazon S3 Glacier.
", + "documentation":"The source object of the COPY action is not in the active tier and is only stored in Amazon S3 Glacier.
", "exception":true }, "ObjectOwnership":{ @@ -6808,7 +6808,7 @@ "locationName":"RestrictPublicBuckets" } }, - "documentation":"The PublicAccessBlock configuration that you want to apply to this Amazon S3 bucket. You can enable the configuration options in any combination. For more information about when Amazon S3 considers a bucket or object public, see The Meaning of \"Public\" in the Amazon Simple Storage Service Developer Guide.
" + "documentation":"The PublicAccessBlock configuration that you want to apply to this Amazon S3 bucket. You can enable the configuration options in any combination. For more information about when Amazon S3 considers a bucket or object public, see The Meaning of \"Public\" in the Amazon Simple Storage Service User Guide.
" }, "PutBucketAccelerateConfigurationRequest":{ "type":"structure", @@ -6955,7 +6955,7 @@ }, "CORSConfiguration":{ "shape":"CORSConfiguration", - "documentation":"Describes the cross-origin access configuration for objects in an Amazon S3 bucket. For more information, see Enabling Cross-Origin Resource Sharing in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"Describes the cross-origin access configuration for objects in an Amazon S3 bucket. For more information, see Enabling Cross-Origin Resource Sharing in the Amazon Simple Storage Service User Guide.
", "locationName":"CORSConfiguration", "xmlNamespace":{"uri":"http://s3.amazonaws.com/doc/2006-03-01/"} }, @@ -7541,7 +7541,7 @@ }, "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name that contains the object to which you want to attach the ACL.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name that contains the object to which you want to attach the ACL.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -7583,7 +7583,7 @@ }, "Key":{ "shape":"ObjectKey", - "documentation":"Key for which the PUT operation was initiated.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"Key for which the PUT action was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Key" }, @@ -7626,7 +7626,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name containing the object that you want to place a Legal Hold on.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name containing the object that you want to place a Legal Hold on.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -7804,7 +7804,7 @@ }, "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name to which the PUT operation was initiated.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name to which the PUT action was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -7882,7 +7882,7 @@ }, "Key":{ "shape":"ObjectKey", - "documentation":"Object key for which the PUT operation was initiated.
", + "documentation":"Object key for which the PUT action was initiated.
", "location":"uri", "locationName":"Key" }, @@ -7942,7 +7942,7 @@ }, "BucketKeyEnabled":{ "shape":"BucketKeyEnabled", - "documentation":"Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with a PUT operation doesn’t affect bucket-level settings for S3 Bucket Key.
", + "documentation":"Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with a PUT action doesn’t affect bucket-level settings for S3 Bucket Key.
", "location":"header", "locationName":"x-amz-server-side-encryption-bucket-key-enabled" }, @@ -8003,7 +8003,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name that contains the object you want to apply this Object Retention configuration to.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name that contains the object you want to apply this Object Retention configuration to.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -8032,7 +8032,7 @@ }, "BypassGovernanceRetention":{ "shape":"BypassGovernanceRetention", - "documentation":"Indicates whether this operation should bypass Governance-mode restrictions.
", + "documentation":"Indicates whether this action should bypass Governance-mode restrictions.
", "location":"header", "locationName":"x-amz-bypass-governance-retention" }, @@ -8072,7 +8072,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name containing the object.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name containing the object.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -8498,13 +8498,13 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name containing the object to restore.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name containing the object to restore.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, "Key":{ "shape":"ObjectKey", - "documentation":"Object key for which the operation was initiated.
", + "documentation":"Object key for which the action was initiated.
", "location":"uri", "locationName":"Key" }, @@ -8586,7 +8586,7 @@ "documentation":"Container for redirect information. You can redirect requests to another host, to another page, or with another protocol. In the event of an error, you can specify a different error code to return.
" } }, - "documentation":"Specifies the redirect behavior and when a redirect is applied. For more information about routing rules, see Configuring advanced conditional redirects in the Amazon Simple Storage Service Developer Guide.
" + "documentation":"Specifies the redirect behavior and when a redirect is applied. For more information about routing rules, see Configuring advanced conditional redirects in the Amazon Simple Storage Service User Guide.
" }, "RoutingRules":{ "type":"list", @@ -8620,7 +8620,7 @@ }, "Transition":{ "shape":"Transition", - "documentation":"Specifies when an object transitions to a specified storage class. For more information about Amazon S3 lifecycle configuration rules, see Transitioning Objects Using Amazon S3 Lifecycle in the Amazon Simple Storage Service Developer Guide.
" + "documentation":"Specifies when an object transitions to a specified storage class. For more information about Amazon S3 lifecycle configuration rules, see Transitioning Objects Using Amazon S3 Lifecycle in the Amazon Simple Storage Service User Guide.
" }, "NoncurrentVersionTransition":{"shape":"NoncurrentVersionTransition"}, "NoncurrentVersionExpiration":{"shape":"NoncurrentVersionExpiration"}, @@ -8911,7 +8911,7 @@ }, "BucketKeyEnabled":{ "shape":"BucketKeyEnabled", - "documentation":"Specifies whether Amazon S3 should use an S3 Bucket Key with server-side encryption using KMS (SSE-KMS) for new objects in the bucket. Existing objects are not affected. Setting the BucketKeyEnabled element to true causes Amazon S3 to use an S3 Bucket Key. By default, S3 Bucket Key is not enabled.
For more information, see Amazon S3 Bucket Keys in the Amazon Simple Storage Service Developer Guide.
" + "documentation":"Specifies whether Amazon S3 should use an S3 Bucket Key with server-side encryption using KMS (SSE-KMS) for new objects in the bucket. Existing objects are not affected. Setting the BucketKeyEnabled element to true causes Amazon S3 to use an S3 Bucket Key. By default, S3 Bucket Key is not enabled.
For more information, see Amazon S3 Bucket Keys in the Amazon Simple Storage Service User Guide.
" } }, "documentation":"Specifies the default server-side encryption configuration.
" @@ -9149,7 +9149,7 @@ }, "Events":{ "shape":"EventList", - "documentation":"The Amazon S3 bucket event about which to send notifications. For more information, see Supported Event Types in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The Amazon S3 bucket event about which to send notifications. For more information, see Supported Event Types in the Amazon Simple Storage Service User Guide.
", "locationName":"Event" }, "Filter":{"shape":"NotificationConfigurationFilter"} @@ -9198,7 +9198,7 @@ "documentation":"The storage class to which you want the object to transition.
" } }, - "documentation":"Specifies when an object transitions to a specified storage class. For more information about Amazon S3 lifecycle configuration rules, see Transitioning Objects Using Amazon S3 Lifecycle in the Amazon Simple Storage Service Developer Guide.
" + "documentation":"Specifies when an object transitions to a specified storage class. For more information about Amazon S3 lifecycle configuration rules, see Transitioning Objects Using Amazon S3 Lifecycle in the Amazon Simple Storage Service User Guide.
" }, "TransitionList":{ "type":"list", @@ -9288,7 +9288,7 @@ "members":{ "Bucket":{ "shape":"BucketName", - "documentation":"The bucket name.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The bucket name.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" }, @@ -9463,7 +9463,7 @@ }, "Bucket":{ "shape":"BucketName", - "documentation":"The name of the bucket to which the multipart upload was initiated.
When using this API with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this operation with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this API with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this operation using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", + "documentation":"The name of the bucket to which the multipart upload was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using Access Points in the Amazon Simple Storage Service Developer Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action using S3 on Outposts through the AWS SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon Simple Storage Service Developer Guide.
", "location":"uri", "locationName":"Bucket" },