HyperHDR tpm2net to wled

[Eiscoffee]

Hello,

i have my rpi4 running with hyperhdr and over tpm2net connected to an esp32 with wled installed. (Tpm2net because i have 1143 LEDs to controll)

Everything works - 95% of the time. Sometimes it just looses the connection and for 5 secs the WLED standard light settings come trough.

here is the the log:

2022-02-20T15:44:10.647Z [IMAGETOLED1] Total index number is: 852376. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:44:20.670Z [V4L2:USB VIDEO: USB] Video FPS: 20.00, av. delay: 20ms, good: 1200, bad: 0 (60.02,15) 2022-02-20T15:44:49.303Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:49.304Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:49.304Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:49.353Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:49.353Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:49.353Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:49.401Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:49.401Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:49.401Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:49.452Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.649Z [LEDDEVICE] Previous line repeats 190 times 2022-02-20T15:44:52.649Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.649Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.649Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.701Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.701Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.701Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.749Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.749Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.749Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:44:52.801Z [LEDDEVICE] (192.168.178.97:65506) Write Error: (7) Unable to send a message 2022-02-20T15:45:01.311Z [IMAGETOLED1] Total index number is: 1619526. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:45:01.897Z [IMAGETOLED1] Total index number is: 603622. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:45:20.670Z [V4L2:USB VIDEO: USB] Video FPS: 20.00, av. delay: 20ms, good: 1200, bad: 0 (60.00,15) 2022-02-20T15:45:21.987Z [IMAGETOLED1] Total index number is: 1619526. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:45:22.549Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from 2001:16b8:502f:9200:533:39c6:50c4:ee86 2022-02-20T15:45:22.550Z [WEBSOCKET] (JsonAPI.cpp:89) Client '2001:16b8:502f:9200:533:39c6:50c4:ee86' switch to HyperHDR instance 0 2022-02-20T15:45:22.669Z [DB] Database opened: /home/pi/.hyperhdr/db/hyperhdr.db 2022-02-20T15:45:22.845Z [WEBSOCKET] (JsonAPI.cpp:89) Client '2001:16b8:502f:9200:533:39c6:50c4:ee86' switch to HyperHDR instance 1 2022-02-20T15:45:23.155Z [IMAGETOLED1] Total index number is: 889584. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:45:29.813Z [WEBSOCKET] (JsonAPI.cpp:1300) log streaming activated for client 2001:16b8:502f:9200:533:39c6:50c4:ee86 2022-02-20T15:46:09.351Z [IMAGETOLED1] Total index number is: 1202304. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:46:20.714Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 20ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:46:20.747Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 11ms, total time: 13.50s, refreshes count: 1201 2022-02-20T15:47:20.755Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 19ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:47:20.786Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.37s, refreshes count: 1201 2022-02-20T15:47:46.886Z [IMAGETOLED1] Total index number is: 745311. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:48:10.138Z [IMAGETOLED1] Total index number is: 1202304. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:48:20.794Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 21ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:48:20.829Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 11ms, total time: 14.31s, refreshes count: 1201 2022-02-20T15:49:20.835Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 21ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:49:20.867Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.48s, refreshes count: 1201 2022-02-20T15:50:20.880Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 20ms, good: 1201, bad: 0 (60.05,15) 2022-02-20T15:50:20.914Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.45s, refreshes count: 1201 2022-02-20T15:51:20.922Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 20ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:51:20.973Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 14ms, total time: 17.05s, refreshes count: 1201 2022-02-20T15:52:20.960Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 20ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:52:20.992Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.62s, refreshes count: 1201 2022-02-20T15:53:20.999Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 20ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:53:21.033Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.76s, refreshes count: 1201 2022-02-20T15:54:21.039Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 21ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:54:21.072Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.64s, refreshes count: 1201 2022-02-20T15:55:21.084Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 20ms, good: 1201, bad: 0 (60.05,15) 2022-02-20T15:55:21.117Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.53s, refreshes count: 1201 2022-02-20T15:56:21.124Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 21ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:56:21.158Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.52s, refreshes count: 1201 2022-02-20T15:57:21.165Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 21ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:57:21.199Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.50s, refreshes count: 1201 2022-02-20T15:58:03.347Z [IMAGETOLED1] Total index number is: 1050040. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:58:08.647Z [IMAGETOLED1] Total index number is: 1048696. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:58:12.147Z [IMAGETOLED1] Total index number is: 1004000. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T15:58:21.206Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 20ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:58:21.237Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 15.79s, refreshes count: 1201 2022-02-20T15:59:21.247Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 20ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T15:59:21.280Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 11ms, total time: 13.92s, refreshes count: 1201 2022-02-20T16:00:21.287Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 20ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T16:00:21.318Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 11ms, total time: 13.92s, refreshes count: 1201 2022-02-20T16:00:28.526Z [IMAGETOLED1] Total index number is: 1202304. Sparse processing: disabled, image size: 960 x 540, area number: 1143 2022-02-20T16:01:21.331Z [V4L2:USB VIDEO: USB] Video FPS: 20.02, av. delay: 21ms, good: 1201, bad: 0 (60.04,15) 2022-02-20T16:01:21.366Z [IMAGETOLED1] Performance warning. Image to led instance 1 processing => FPS: 20.02, av. delay: 13ms, total time: 16.32s, refreshes count: 1201

any ideas?
Thank you!

[awawa-dev]

Hi
I always consider Wifi connection between HyperHDR and LED controller as problematic. While it is easy to set up, good for diagnosing problems and applying visual effects, it is not very stable for ambient lighting. That's why I created 4 alternative cable solution including WLED fork ;) If you want stable connection then you should use one of them. Otherwise it is looking for a needle in a steep slope which causes these problems: neighbor turning on sometimes a device generating significant EMF, too many devices trying to communicate on the same band, router software or ESP software. I do not monitor the WLED theme anymore, maybe this is already corrected as long as the cause was found, but it was once a fact that in the case of wifi communication the ESP32 were less stable than the ESP8266 devices: the dual core only created problems for this software.

BTW please enable: sparse processing in the processing tab and/or quarter of frame mode in the grabber settings. Your host device is already struggling with your configuration to compute such large number of image areas for the LED strip.