Skip to content

Latest commit

 

History

History
152 lines (105 loc) · 6.43 KB

cashaddr.md

File metadata and controls

152 lines (105 loc) · 6.43 KB
Raw

Address format for Bitcoin Cash

Version 1.0, 2017-10-13

Abstract

This document describes a proposed address format to be used on Bitcoin Cash. It is a base32 encoded format using BCH[1] codes as checksum and that can be used directly in links or QR codes.

This format reuses the work done for Bech32[2] and is similar in some aspects, but improves on others.

Specification

The address is composed of

  1. A prefix indicating the network on which this address is valid.
  2. A separator, always :
  3. A base32 encoded payload indicating the destination of the address and containing a checksum.

Prefix

The prefix indicates the network on which this addess is valid. It is set to bitcoincash for Bitcoin Cash main net, bchtest for bitcoin cash testnet and bchreg for bitcoin cash regtest.

The prefix is followed by the separator :.

When presented to users, the prefix may be omitted as it is part of the checksum computation. The checksum ensures that addresses on different networks will remain incompatible, even in the absence of an explicit prefix.

Payload

The payload is a base32 encoded stream of data.

0 1 2 3 4 5 6 7
+0 q p z r y 9 x 8
+8 g f 2 t v d w 0
+16 s 3 j n 5 4 k h
+24 c e 6 m u a 7 l

The payload is composed of 3 elements:

  1. A version byte indicating the type of address.
  2. A hash.
  3. A 40 bits checksum.

Version byte

The version byte's most signficant bit is reserved and must be 0. The 4 next bits indicate the type of address and the 3 least significant bits indicate the size of the hash.

Size bits Hash size in bits
0 160
1 192
2 224
3 256
4 320
5 384
6 448
7 512

Encoding the size of the hash in the version field ensure that it is possible to check that the length of the address is correct.

Type bits Meaning Version byte value
0 P2KH 0
1 P2SH 8

Further types will be added as news features are added.

Hash

The hash part really deserves not much explanation as its meaning is dependent on the version field. It is the hash that represents the data, namely a hash of the public key for P2KH and the hash of the reedemScript for P2SH.

Checksum

The checksum is a 40 bits BCH codes defined over GF(2^5). It ensures the detection of up to 6 errors in the address and 8 in a row. Combined with the length check, this provides very strong guarantee against errors.

The checksum is computed per the code below:

uint64_t PolyMod(const data &v) {
    uint64_t c = 1;
    for (uint8_t d : v) {
        uint8_t c0 = c >> 35;
        c = ((c & 0x07ffffffff) << 5) ^ d;
        
        if (c0 & 0x01) c ^= 0x98f2bc8e61;
        if (c0 & 0x02) c ^= 0x79b76d99e2;
        if (c0 & 0x04) c ^= 0xf33e5fb3c4;
        if (c0 & 0x08) c ^= 0xae2eabe2a8;
        if (c0 & 0x10) c ^= 0x1e4f43e470;
    }
    
    return c ^ 1;
}

The checksum is calculated over the following data (list of integers in range 0-31):

  1. The lower 5 bits of each characters of the prefix. - e.g. "bit..." becomes 2,9,20,...
  2. A zero for the separator (5 zero bits).
  3. The payload by chunks of 5 bits. If necessary, the payload is padded to the right with zero bits to complete any unfinished chunk at the end.
  4. Eight zeros as a "template" for the checksum.

The 40-bit number returned by PolyMod is split into eight 5-bit numbers (msb first). The payload and the checksum are then encoded according to the base32 character table.

To verify a base32-formatted address, it is split at the colon ":" into prefix and payload. Input data (list of integers) for PolyMod function is assembled from these parts:

  1. The lower 5 bits of each characters of the prefix.
  2. A zero for the separator (5 zero bits).
  3. Each base32 char of the payload mapped to it's respective number. If PolyMod returns non-zero, then the address was broken.

The following adresses can be used as test vector for checksum computation:

  • prefix:x64nx6hz
  • p:gpf8m4h7
  • bitcoincash:qpzry9x8gf2tvdw0s3jn54khce6mua7lcw20ayyn
  • bchtest:testnetaddress4d6njnut
  • bchreg:555555555555555555555555555555555555555555555udxmlmrz

NB: These addresses do not have valid payload on purpose.

Error correction

BCH codes allows for error correction. However, it is strongly advised that error correction is not done in an automatic manner as it may cause funds to be lost irrecoverably if done incorrectly. It may however be used to hint a user at a possible error.

Uppercase/lowercase

Lower case is preferred for cashaddr, but uppercase is accepted. A mixture of lower case and uppercase must be rejected.

Allowing for uppercase ensure that the address can be encoded efficiently in QR codes using the alphanumeric mode[3].

Double prefix

In some contexts, such as payment URLs or QR codes, the addresses are currently prefixed with bitcoincash:. In these contexts, the address must not be double prefixed.

Examples of address translation

The following addresses are given in the legacy and new format.

Legacy CashAddr
1BpEi6DfDAUFd7GtittLSdBeYJvcoaVggu bitcoincash:qpm2qsznhks23z7629mms6s4cwef74vcwvy22gdx6a
1KXrWXciRDZUpQwQmuM1DbwsKDLYAYsVLR bitcoincash:qr95sy3j9xwd2ap32xkykttr4cvcu7as4y0qverfuy
16w1D5WRVKJuZUsSRzdLp9w3YGcgoxDXb bitcoincash:qqq3728yw0y47sqn6l2na30mcw6zm78dzqre909m2r
3CWFddi6m4ndiGyKqzYvsFYagqDLPVMTzC bitcoincash:ppm2qsznhks23z7629mms6s4cwef74vcwvn0h829pq
3LDsS579y7sruadqu11beEJoTjdFiFCdX4 bitcoincash:pr95sy3j9xwd2ap32xkykttr4cvcu7as4yc93ky28e
31nwvkZwyPdgzjBJZXfDmSWsC4ZLKpYyUw bitcoincash:pqq3728yw0y47sqn6l2na30mcw6zm78dzq5ucqzc37

References

[1] https://en.wikipedia.org/wiki/BCH_code

[2] https://github.com/bitcoin/bips/blob/master/bip-0173.mediawiki

[3] http://www.thonky.com/qr-code-tutorial/alphanumeric-mode-encoding