Skip to content

Latest commit

 

History

History
268 lines (195 loc) · 7.38 KB

README.md

File metadata and controls

268 lines (195 loc) · 7.38 KB
Raw

Used Raspian Image: Stretch @ 2019-04-08

Link https://downloads.raspberrypi.org/raspbian/images/raspbian-2019-04-09/2019-04-08-raspbian-stretch.zip

todo: https://blog.bigbinary.com/2018/09/12/configuring-memory-allocation-in-imagemagick.html

Photobooth

Description

Photobooth based on Raspberry Pi + RaspiCam + Canon Selphy CP1300 printer

see also:

https://www.hackster.io/ericBcreator/photo-booth-powered-by-a-raspberry-pi-23b491

Components

Raspberry PI 3 Display: 10.1 Inch with HDMI converter (Resolution: 1024x600) Printer: Canon Selphy CP1300 Buttons: Arcade Buttons Housing: Plastic Box Power: 5V/5A Powersupply (5Amps not needed, 2Amps should be enough)

todo - Blockschaltbild

Install

  • download raspbian stretch lite image
  • install to SD Card
  • boot raspberry the first time
  • login with pi/rasperry

config raspberry

  • sudo raspi-config
  • setup Boot Options -> Desktop/CLI -> Console Autologin
  • setup locals / network (incl Hostname) / keyboard layout
  • setup interfacing -> Camera enable / SSH enable / I2C enable
  • setup Advanced Options -> Overscan enable (if necessary) / Memory Split to 256 MB
  • exit raspi-config

Change resolution (if necessary)

  • sudo nano /boot/config.txt

  • add

    # uncomment to force a console size. By default it will be display's size minus

    # overscan.

    #framebuffer_width=1024

    #framebuffer_height=600

    #hdmi_ignore_edid=0xa5000080

    hdmi_cvt=1024 600 60 3 0 0 0

    # uncomment to force a specific HDMI mode (this will force VGA)

    hdmi_group=2

    hdmi_mode=87

  • see also: https://www.raspberrypi.org/forums/viewtopic.php?t=14914

  • also add dispmanx_offline=1 to /boot/config.txt

  • see also: raspberrypi/userland#232

  • sudo reboot

Update software

  • sudo rpi-udpate - uodate firmware of raspberry to newer version (at this moment, 4.19 is new released)

  • sudo apt-get update

  • sudo apt-get upgrade

  • sudo apt-get install cups python3-dev python3-pip imagemagick python3-cups python3-picamera python3-rpi.gpio git libusb-1.0 libcups2-dev python3-usb python3-pil.imagetk

  • if RPGPIO fails, try sudo pip3 install RPi.GPIO

install needed python packages

  • sudo pip3 install pyudev
  • sudo pip3 install psutil
  • sudo pip3 install transitions
  • sudo pip3 install Wand

install newer Gutenprint Driver (V 5.3)

  • https://www.raspberrypi.org/forums/viewtopic.php?t=219763
  • Add new unstable Source
  • sudo nano /etc/apt/sources.list
  • Add the following lines:
  • deb [trusted=yes] http://ftp.us.debian.org/debian sid main
  • deb-src [trusted=yes] http://ftp.us.debian.org/debian sid main
  • close
  • sudo apt-get update
  • sudo apt-get -t sid install printer-driver-gutenprint
  • sudo reboot
  • after installing Gutenprint, uncomment in /etc/apt/sources.list
  • deb [trusted=yes] http://ftp.us.debian.org/debian sid main
  • deb-src [trusted=yes] http://ftp.us.debian.org/debian sid main

setup cups

  • edit cups config file

  • sudo nano /etc/cups/cupsd.conf

  • -> change Listen localhost:631 to Port 631 -> Save and exit

  • add following line to Location / and Location /admin and Location /admin/conf

    • Allow @LOCAL

  • add user pi to group lpadmin

  • sudo usermod -aG lpadmin pi

  • sudo service cups restart

  • browse to IPaddress of Raspi:631/admin/

  • login with pi/raspberry

  • click add printer

  • choose local printer -> Canon SELPHY CP1300 (Canon SELPHY CP1300) (if not listed - is the printer connected and powered on?)

  • change standardsettings -> Printer Features Common -> Borderless -> Yes

Get the Software

add script to autostart

  • sudo nano /etc/rc.local
  • add befor exit 0
  • sudo python3 /home/pi/Photobooth/photobooth.py &
  • save and close the file

make rasberry quiet boot

  • sudo nano /boot/cmdline.txt
    • Change the console from tty1 to console=tty3
  • add this to end of line:
    • quiet splash loglevel=0 logo.nologo vt.global_cursor_default=0

optional

RTC (Real Time Clock)

  • sudo nano /etc/modules

  • add i2c-bcm2708 / Close and save file

  • sudo apt-get install i2c-tools

  • test with sudo i2cdetect -y 1

  • it shall detect the rtc module at address 0x68

  • You can add support for the RTC by adding a device tree overlay. Run

  • sudo nano /boot/config.txt

  • add at the end of the file

  • dtoverlay=i2c-rtc,ds3231

  • sudo reboot

  • sudo i2cdetect -y 1

  • now it should print UU at adress 0x68 -> systemdriver is working

  • Disable the "fake hwclock" which interferes with the 'real' hwclock

  • sudo apt-get -y remove fake-hwclock

  • sudo update-rc.d -f fake-hwclock remove

  • sudo systemctl disable fake-hwclock

  • sudo nano /lib/udev/hwclock-set

  • #if [ -e /run/systemd/system ] ; then

  • # exit 0

  • #fi

  • now sync time with the rtc (correct time set in raspi is assumed)

  • sudo hwclock -w

  • test with sudo hwclock -r

  • That's it! Next time you boot the time will automatically be synced from the RTC module

  • https://cdn-learn.adafruit.com/downloads/pdf/adding-a-real-time-clock-to-raspberry-pi.pdf

optional

Samba Server

  • sudo apt-get install samba samba-common smbclient

  • edit /etc/samba/smb.conf

  • sudo nano /etc/samba/smb.conf

  • section global

    • [global]
    • workgroup = WORKGROUP
    • wins support = yes
    • dns proxy = no
    • log file = /var/log/samba/log.%m
    • max log size = 1000
    • syslog = 0
    • panic action = /usr/share/samba/panic-action %d
    • server role = standalone server
    • passdb backend = tdbsam
    • obey pam restrictions = yes
    • unix password sync = yes
    • passwd program = /usr/bin/passwd %u
    • passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n
    • *password\supdated\ssucces$
    • pam password change = yes
    • map to guest = bad user

  • printers

    • [printers]

    • comment = All Printers

    • browseable = no

    • path = /var/spool/samba

    • printable = yes

    • guest ok = no

    • read only = yes

    • create mask = 0700

    • [print$]

    • comment = Printer Drivers

    • path = /var/lib/samba/printers

    • browseable = yes

    • read only = yes

    • guest ok = no

  • share of folder

    • [PhotoBooth]
    • comment = Development
    • path = /home/pi
    • read only = no
    • guest ok = yes
    • browseable = yes
    • guest only = yes
    • public = yes
    • writable = yes
    • security = share
    • create mask=0777
    • directory mask=0777

usb automount

http://www.raspberry-pi-geek.de/Magazin/2015/03/Echtzeituhr-Modul-DS3231-sorgt-fuer-genaue-Zeitangaben/(offset)/2

https://raspberrypi.stackexchange.com/questions/59310/remove-boot-messages-all-text-in-jessie

further informations are here:

https://www.elektronik-kompendium.de/sites/raspberry-pi/2007081.htm

Logos https://de.cooltext.com/Logo-Design-Outline?Font=11391

https://de.cooltext.com/Render-Image?RenderID=308591325204975&LogoId=3085913252