usb keyboard (berry)

[ChrisVonFrosta]

is there any way to get input from usb Keyboard ?
i have on of those boards

[sfromis]

No "full" support for USB, only for USB CDC for serial over USB.

[barbudor]

On ESP32-S3, the USB support OTG which means it can act either as a device (when you connect it to a host like your PC) or as a host (to connect a device).
So in theory it should be possible with an ESP32-S3 and there might be Arduino library to support USB Host mode and a keyboard.
Nevertheless, Tasmota does not include such library/driver. That would require some work for a very little edge use-case.