ESP32s2 , Tasmota 14.3.0 , HOOBS not get status

[lisergio]

Good afternoon..
I have installed tasmota 14.3 on an ESP32s2, and I have configured 8 relays.
I have created 8 accessories in HOOBS to control them from the mobile...
From the home app, I can activate and deactivate them perfectly, but if I activate them from another mobile, or from the PC, the home app does not update the status of the relay.

each relay in tasmota is POWER1, POWER2... POWER8

Example of the accessory in Hoobs..

   {
        "accessory": "mqtt-switch-tasmota",
        "switchType": "ligth",
        "name": "ESP32s2_1",
        "url": "mqtt://192.168.0.56",
        "topics": {
            "statusGet": "stat/esp32s2/RESULT1",
            "statusSet": "cmnd/esp32s2/POWER1",
            "stateGet": "tele/esp32s2/STATE1"
        },
        "onValue": "ON",
        "offValue": "OFF",
        "activityTopic": "tele/esp32s2/LWT",
        "activityParameter": "Online",
        "startCmd": "cmnd/esp32s2/TelePeriod",
        "startParameter": "60",
        "manufacturer": "ITEAD",
        "model": "Sonoff"
    },
   {
        "accessory": "mqtt-switch-tasmota",
        "switchType": "ligth",
        "name": "ESP32s2_2",
        "url": "mqtt://192.168.0.56",
        "topics": {
            "statusGet": "stat/esp32s2/RESULT2",
            "statusSet": "cmnd/esp32s2/POWER2",
            "stateGet": "tele/esp32s2/STATE2"
        },
        "onValue": "ON",
        "offValue": "OFF",
        "activityTopic": "tele/esp32s2/LWT",
        "activityParameter": "Online",
        "startCmd": "cmnd/esp32s2/TelePeriod",
        "startParameter": "60",
        "manufacturer": "ITEAD",
        "model": "Sonoff"
    },

And so it is repeated with the 8 accessories

If I only configure one relay, it works and updates correctly, but when there is more than one, it stops updating.

any idea?

Thanks!!

[Jason2866]

What is "HOOBS"?

[lisergio]

a version of homebridge to control accessories with ios

[Jason2866]

Better ask there for help how to configure HOOBS. There are probably not many users here which use and can help.

[sfromis]

One detail - this is not how Tasmota works with topics.
"statusGet": "stat/esp32s2/RESULT1"

STATE and RESULT are not indexed in the topic, but the payloads may (or not) have multiple relays.