diff --git a/hardware/arduino/cores/arduino/wiring_analog.c b/hardware/arduino/cores/arduino/wiring_analog.c
index 3f19c7f88e9..c99325f984a 100644
--- a/hardware/arduino/cores/arduino/wiring_analog.c
+++ b/hardware/arduino/cores/arduino/wiring_analog.c
@@ -41,22 +41,22 @@ int analogRead(uint8_t pin)
 {
 	uint8_t low, high;
 
-#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+#if defined(analogPinToChannel)
+#if defined(__AVR_ATmega32U4__)
+	if (pin >= 18) pin -= 18; // allow for channel or pin numbers
+#endif
+	pin = analogPinToChannel(pin);
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
 	if (pin >= 54) pin -= 54; // allow for channel or pin numbers
 #elif defined(__AVR_ATmega32U4__)
 	if (pin >= 18) pin -= 18; // allow for channel or pin numbers
 #elif defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__)
 	if (pin >= 24) pin -= 24; // allow for channel or pin numbers
-#elif defined(analogPinToChannel) && (defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__))
-	pin = analogPinToChannel(pin);
 #else
 	if (pin >= 14) pin -= 14; // allow for channel or pin numbers
 #endif
-	
-#if defined(__AVR_ATmega32U4__)
-	pin = analogPinToChannel(pin);
-	ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);
-#elif defined(ADCSRB) && defined(MUX5)
+
+#if defined(ADCSRB) && defined(MUX5)
 	// the MUX5 bit of ADCSRB selects whether we're reading from channels
 	// 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high).
 	ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5);