diff --git a/hw/bsp/nucleo-f303k8/bsp.yml b/hw/bsp/nucleo-f303k8/bsp.yml
index 89e7d8bb6d..e910ac0d65 100644
--- a/hw/bsp/nucleo-f303k8/bsp.yml
+++ b/hw/bsp/nucleo-f303k8/bsp.yml
@@ -22,13 +22,9 @@ bsp.url: https://www.st.com/en/evaluation-tools/nucleo-f303k8.html
 bsp.maker: "STMicroelectronics"
 bsp.arch: cortex_m4
 bsp.compiler: compiler/arm-none-eabi-m4
-bsp.linkerscript:
-    - "hw/bsp/nucleo-f303k8/nucleo-f303k8.ld"
-    - "@apache-mynewt-core/hw/mcu/stm/stm32f3xx/stm32f303.ld"
-bsp.downloadscript: "hw/bsp/nucleo-f303k8/nucleo-f303k8_download.sh"
+bsp.linkerscript: autogenerated
+bsp.downloadscript: "hw/scripts/download.sh"
 bsp.debugscript: "hw/bsp/nucleo-f303k8/nucleo-f303k8_debug.sh"
-bsp.downloadscript.WINDOWS.OVERWRITE: "hw/bsp/nucleo-f303k8/nucleo-f303k8_download.cmd"
-bsp.debugscript.WINDOWS.OVERWRITE: "hw/bsp/nucleo-f303k8/nucleo-f303k8_debug.cmd"
 
 bsp.flash_map:
     areas:
diff --git a/hw/bsp/stm32f3discovery/stm32f3discovery.ld b/hw/bsp/nucleo-f303k8/link/include/mcu_config.ld.h
similarity index 69%
rename from hw/bsp/stm32f3discovery/stm32f3discovery.ld
rename to hw/bsp/nucleo-f303k8/link/include/mcu_config.ld.h
index 0316a347b8..3596fc2cc1 100644
--- a/hw/bsp/stm32f3discovery/stm32f3discovery.ld
+++ b/hw/bsp/nucleo-f303k8/link/include/mcu_config.ld.h
@@ -1,4 +1,4 @@
-/**
+/*
  * Licensed to the Apache Software Foundation (ASF) under one
  * or more contributor license agreements.  See the NOTICE file
  * distributed with this work for additional information
@@ -6,7 +6,7 @@
  * to you under the Apache License, Version 2.0 (the
  * "License"); you may not use this file except in compliance
  * with the License.  You may obtain a copy of the License at
- * 
+ *
  *  http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing,
@@ -16,17 +16,18 @@
  * specific language governing permissions and limitations
  * under the License.
  */
-ENTRY(Reset_Handler)
 
 /*
- * Memory map
+ * Memory regions placed in CCM
+ * If stack or core data or other section should be place in RAM
+ * <target_name>/link/include/target_config.ld.h should just do:
+ *  #undef BSSNZ_RAM
+ *  #undef COREBSS_RAM
+ *  #undef COREDATA_RAM
+ *  #undef STACK_REGION
  */
-MEMORY {
-    FLASH (rx): ORIGIN = 0x08004000, LENGTH = 88K
-    CCRAM (rw): ORIGIN = 0x10000000, LENGTH = 8K
-    SRAM  (rw): ORIGIN = 0x20000000, LENGTH = 40K
-}
-/*
- * Image header size - no bootloader support, no header.
- */
-_imghdr_size = 0x20;
+
+#define BSSNZ_RAM CCM
+#define COREBSS_RAM CCM
+#define COREDATA_RAM CCM
+#define STACK_REGION CCM
diff --git a/hw/bsp/stm32f3discovery/boot-stm32f3discovery.ld b/hw/bsp/nucleo-f303k8/link/include/memory_regions.ld.h
similarity index 74%
rename from hw/bsp/stm32f3discovery/boot-stm32f3discovery.ld
rename to hw/bsp/nucleo-f303k8/link/include/memory_regions.ld.h
index 4509320b31..8fc56b43d4 100644
--- a/hw/bsp/stm32f3discovery/boot-stm32f3discovery.ld
+++ b/hw/bsp/nucleo-f303k8/link/include/memory_regions.ld.h
@@ -1,4 +1,4 @@
-/**
+/*
  * Licensed to the Apache Software Foundation (ASF) under one
  * or more contributor license agreements.  See the NOTICE file
  * distributed with this work for additional information
@@ -6,7 +6,7 @@
  * to you under the Apache License, Version 2.0 (the
  * "License"); you may not use this file except in compliance
  * with the License.  You may obtain a copy of the License at
- * 
+ *
  *  http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing,
@@ -16,16 +16,10 @@
  * specific language governing permissions and limitations
  * under the License.
  */
-ENTRY(Reset_Handler)
-
-/*
- * Memory map
- */
-MEMORY {
-    FLASH (rx): ORIGIN = 0x08000000, LENGTH = 16K
-    CCRAM (rw): ORIGIN = 0x10000000, LENGTH = 8K
-    SRAM  (rw): ORIGIN = 0x20000000, LENGTH = 40K
-}
 
-/* The bootloader does not contain an image header */
-_imghdr_size = 0x0;
+#ifdef STACK_REGION
+    CCM (rwx) : ORIGIN = 0x10000000, LENGTH = (4K - STACK_SIZE)
+    STACK_RAM (rw) : ORIGIN = 0x10001000 - STACK_SIZE, LENGTH = STACK_SIZE
+#else
+    CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 4K
+#endif
diff --git a/hw/bsp/nucleo-f303k8/nucleo-f303k8_debug.cmd b/hw/bsp/nucleo-f303k8/nucleo-f303k8_debug.cmd
deleted file mode 100644
index 3444fd3279..0000000000
--- a/hw/bsp/nucleo-f303k8/nucleo-f303k8_debug.cmd
+++ /dev/null
@@ -1,22 +0,0 @@
-@rem
-@rem Licensed to the Apache Software Foundation (ASF) under one
-@rem or more contributor license agreements.  See the NOTICE file
-@rem distributed with this work for additional information
-@rem regarding copyright ownership.  The ASF licenses this file
-@rem to you under the Apache License, Version 2.0 (the
-@rem "License"); you may not use this file except in compliance
-@rem with the License.  You may obtain a copy of the License at
-@rem
-@rem  http://www.apache.org/licenses/LICENSE-2.0
-@rem
-@rem Unless required by applicable law or agreed to in writing,
-@rem software distributed under the License is distributed on an
-@rem "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-@rem KIND, either express or implied.  See the License for the
-@rem specific language governing permissions and limitations
-@rem under the License.
-@rem
-
-@rem Execute a shell with a script of the same name and .sh extension
-
-@bash "%~dp0%~n0.sh"
diff --git a/hw/bsp/nucleo-f303k8/nucleo-f303k8_download.cmd b/hw/bsp/nucleo-f303k8/nucleo-f303k8_download.cmd
deleted file mode 100644
index 3444fd3279..0000000000
--- a/hw/bsp/nucleo-f303k8/nucleo-f303k8_download.cmd
+++ /dev/null
@@ -1,22 +0,0 @@
-@rem
-@rem Licensed to the Apache Software Foundation (ASF) under one
-@rem or more contributor license agreements.  See the NOTICE file
-@rem distributed with this work for additional information
-@rem regarding copyright ownership.  The ASF licenses this file
-@rem to you under the Apache License, Version 2.0 (the
-@rem "License"); you may not use this file except in compliance
-@rem with the License.  You may obtain a copy of the License at
-@rem
-@rem  http://www.apache.org/licenses/LICENSE-2.0
-@rem
-@rem Unless required by applicable law or agreed to in writing,
-@rem software distributed under the License is distributed on an
-@rem "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-@rem KIND, either express or implied.  See the License for the
-@rem specific language governing permissions and limitations
-@rem under the License.
-@rem
-
-@rem Execute a shell with a script of the same name and .sh extension
-
-@bash "%~dp0%~n0.sh"
diff --git a/hw/bsp/nucleo-f303k8/nucleo-f303k8_download.sh b/hw/bsp/nucleo-f303k8/nucleo-f303k8_download.sh
deleted file mode 100755
index 23d43dc2d2..0000000000
--- a/hw/bsp/nucleo-f303k8/nucleo-f303k8_download.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/bash
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-# 
-#   http://www.apache.org/licenses/LICENSE-2.0
-# 
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# Called with following variables set:
-#  - BSP_PATH is absolute path to hw/bsp/bsp_name
-#  - BIN_BASENAME is the path to prefix to target binary,
-#    .elf appended to name is the ELF file
-#  - IMAGE_SLOT is the image slot to download to (for non-mfg-image, non-boot)
-#  - FEATURES holds the target features string
-#  - EXTRA_JTAG_CMD holds extra parameters to pass to jtag software
-#  - MFG_IMAGE is "1" if this is a manufacturing image
-
-if [ -z "$BIN_BASENAME" ]; then
-    echo "Need binary to download"
-    exit 1
-fi
-
-IS_BOOTLOADER=0
-
-# Look for 'bootloader' in FEATURES
-for feature in $FEATURES; do
-    if [ $feature == "bootloader" ]; then
-        IS_BOOTLOADER=1
-    fi
-done
-
-if [ "$MFG_IMAGE" == "1" ]; then
-    FILE_NAME=$BASENAME.bin
-elif [ $IS_BOOTLOADER -eq 1 ]; then
-    FILE_NAME=$BIN_BASENAME.elf.bin
-else
-    FILE_NAME=$BIN_BASENAME.elf
-fi
-FLASH_OFFSET=0x08000000
-
-echo "Downloading" $FILE_NAME "to" $FLASH_OFFSET
-
-openocd -d0 -f board/st_nucleo_f3.cfg -c "init; reset halt; flash write_image erase $FILE_NAME; reset run; shutdown" 2>&1 | tee /tmp/newt.log
-
diff --git a/hw/bsp/nucleo-f303k8/pkg.yml b/hw/bsp/nucleo-f303k8/pkg.yml
index a083902c1e..5b6e9edc55 100644
--- a/hw/bsp/nucleo-f303k8/pkg.yml
+++ b/hw/bsp/nucleo-f303k8/pkg.yml
@@ -35,3 +35,5 @@ pkg.cflags.HARDFLOAT:
 pkg.deps:
     - "@apache-mynewt-core/hw/mcu/stm/stm32f3xx"
     - "@apache-mynewt-core/libc"
+    - "@apache-mynewt-core/hw/scripts"
+    - "@apache-mynewt-core/boot/startup"
diff --git a/hw/bsp/nucleo-f303k8/src/arch/cortex_m4/startup_stm32f303x8.s b/hw/bsp/nucleo-f303k8/src/arch/cortex_m4/startup_stm32f303x8.s
deleted file mode 100644
index 36fa04d8ce..0000000000
--- a/hw/bsp/nucleo-f303k8/src/arch/cortex_m4/startup_stm32f303x8.s
+++ /dev/null
@@ -1,408 +0,0 @@
-/**
-  ******************************************************************************
-  * @file      startup_stm32f303x8.s
-  * @author    MCD Application Team
-  * @brief     STM32F303x6/STM32F303x8 devices vector table for GCC toolchain.
-  *            This module performs:
-  *                - Set the initial SP
-  *                - Set the initial PC == Reset_Handler,
-  *                - Set the vector table entries with the exceptions ISR address,
-  *                - Configure the clock system  
-  *                - Branches to main in the C library (which eventually
-  *                  calls main()).
-  *            After Reset the Cortex-M4 processor is in Thread mode,
-  *            priority is Privileged, and the Stack is set to Main.
-  ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-  .syntax unified
-	.cpu cortex-m4
-	.fpu softvfp
-	.thumb
-
-.global	g_pfnVectors
-.global	Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word	_sidata
-/* start address for the .data section. defined in linker script */
-.word	_sdata
-/* end address for the .data section. defined in linker script */
-.word	_edata
-/* start address for the .bss section. defined in linker script */
-.word	_sbss
-/* end address for the .bss section. defined in linker script */
-.word	_ebss
-
-.equ  BootRAM,        0xF1E0F85F
-/**
- * @brief  This is the code that gets called when the processor first
- *          starts execution following a reset event. Only the absolutely
- *          necessary set is performed, after which the application
- *          supplied main() routine is called.
- * @param  None
- * @retval : None
-*/
-
-    .section	.text.Reset_Handler
-	.weak	Reset_Handler
-	.type	Reset_Handler, %function
-Reset_Handler:
-  ldr   sp, =_estack    /* Atollic update: set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
-  movs	r1, #0
-  b	LoopCopyDataInit
-
-CopyDataInit:
-	ldr	r3, =_sidata
-	ldr	r3, [r3, r1]
-	str	r3, [r0, r1]
-	adds	r1, r1, #4
-
-LoopCopyDataInit:
-	ldr	r0, =_sdata
-	ldr	r3, =_edata
-	adds	r2, r0, r1
-	cmp	r2, r3
-	bcc	CopyDataInit
-	ldr	r2, =_sbss
-	b	LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
-	movs	r3, #0
-	str	r3, [r2], #4
-
-LoopFillZerobss:
-	ldr	r3, = _ebss
-	cmp	r2, r3
-	bcc	FillZerobss
-
-    ldr r0, =__HeapBase
-    ldr r1, =__HeapLimit
-    bl  _sbrkInit
-
-/* Call the clock system intitialization function.*/
-    bl  SystemInit
-/* Call the application's entry point.*/
-    bl  _start
-
-LoopForever:
-    b LoopForever
-    
-.size	Reset_Handler, .-Reset_Handler
-
-/**
- * @brief  This is the code that gets called when the processor receives an
- *         unexpected interrupt.  This simply enters an infinite loop, preserving
- *         the system state for examination by a debugger.
- *
- * @param  None
- * @retval : None
-*/
-    .section	.text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
-	b	Infinite_Loop
-	.size	Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex-M4.  Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- 	.section	.isr_vector,"a",%progbits
-	.type	g_pfnVectors, %object
-	.size	g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-	.word	_estack
-	.word	Reset_Handler
-	.word	NMI_Handler
-	.word	HardFault_Handler
-	.word	MemManage_Handler
-	.word	BusFault_Handler
-	.word	UsageFault_Handler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	SVC_Handler
-	.word	DebugMon_Handler
-	.word	0
-	.word	PendSV_Handler
-	.word	SysTick_Handler
-	.word	WWDG_IRQHandler
-	.word	PVD_IRQHandler
-	.word	TAMP_STAMP_IRQHandler
-	.word	RTC_WKUP_IRQHandler
-	.word	FLASH_IRQHandler
-	.word	RCC_IRQHandler
-	.word	EXTI0_IRQHandler
-	.word	EXTI1_IRQHandler
-	.word	EXTI2_TSC_IRQHandler
-	.word	EXTI3_IRQHandler
-	.word	EXTI4_IRQHandler
-	.word	DMA1_Channel1_IRQHandler
-	.word	DMA1_Channel2_IRQHandler
-	.word	DMA1_Channel3_IRQHandler
-	.word	DMA1_Channel4_IRQHandler
-	.word	DMA1_Channel5_IRQHandler
-	.word	DMA1_Channel6_IRQHandler
-	.word	DMA1_Channel7_IRQHandler
-	.word	ADC1_2_IRQHandler
-	.word	CAN_TX_IRQHandler
-	.word	CAN_RX0_IRQHandler
-	.word	CAN_RX1_IRQHandler
-	.word	CAN_SCE_IRQHandler
-	.word	EXTI9_5_IRQHandler
-	.word	TIM1_BRK_TIM15_IRQHandler
-	.word	TIM1_UP_TIM16_IRQHandler
-	.word	TIM1_TRG_COM_TIM17_IRQHandler
-	.word	TIM1_CC_IRQHandler
-	.word	TIM2_IRQHandler
-	.word	TIM3_IRQHandler
-	.word	0
-	.word	I2C1_EV_IRQHandler
-	.word	I2C1_ER_IRQHandler
-	.word	0
-	.word	0
-	.word	SPI1_IRQHandler
-	.word	0
-	.word	USART1_IRQHandler
-	.word	USART2_IRQHandler
-	.word	USART3_IRQHandler
-	.word	EXTI15_10_IRQHandler
-	.word	RTC_Alarm_IRQHandler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	TIM6_DAC1_IRQHandler
-	.word	TIM7_DAC2_IRQHandler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	COMP2_IRQHandler
-	.word	COMP4_6_IRQHandler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	FPU_IRQHandler
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
-  .weak	NMI_Handler
-	.thumb_set NMI_Handler,Default_Handler
-
-  .weak	HardFault_Handler
-	.thumb_set HardFault_Handler,Default_Handler
-
-  .weak	MemManage_Handler
-	.thumb_set MemManage_Handler,Default_Handler
-
-  .weak	BusFault_Handler
-	.thumb_set BusFault_Handler,Default_Handler
-
-	.weak	UsageFault_Handler
-	.thumb_set UsageFault_Handler,Default_Handler
-
-	.weak	SVC_Handler
-	.thumb_set SVC_Handler,Default_Handler
-
-	.weak	DebugMon_Handler
-	.thumb_set DebugMon_Handler,Default_Handler
-
-	.weak	PendSV_Handler
-	.thumb_set PendSV_Handler,Default_Handler
-
-	.weak	SysTick_Handler
-	.thumb_set SysTick_Handler,Default_Handler
-
-	.weak	WWDG_IRQHandler
-	.thumb_set WWDG_IRQHandler,Default_Handler
-
-	.weak	PVD_IRQHandler
-	.thumb_set PVD_IRQHandler,Default_Handler
-
-	.weak	TAMP_STAMP_IRQHandler
-	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
-
-	.weak	RTC_WKUP_IRQHandler
-	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
-
-	.weak	FLASH_IRQHandler
-	.thumb_set FLASH_IRQHandler,Default_Handler
-
-	.weak	RCC_IRQHandler
-	.thumb_set RCC_IRQHandler,Default_Handler
-
-	.weak	EXTI0_IRQHandler
-	.thumb_set EXTI0_IRQHandler,Default_Handler
-
-	.weak	EXTI1_IRQHandler
-	.thumb_set EXTI1_IRQHandler,Default_Handler
-
-	.weak	EXTI2_TSC_IRQHandler
-	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
-
-	.weak	EXTI3_IRQHandler
-	.thumb_set EXTI3_IRQHandler,Default_Handler
-
-	.weak	EXTI4_IRQHandler
-	.thumb_set EXTI4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel1_IRQHandler
-	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel2_IRQHandler
-	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel3_IRQHandler
-	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel4_IRQHandler
-	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel5_IRQHandler
-	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel6_IRQHandler
-	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel7_IRQHandler
-	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
-	.weak	ADC1_2_IRQHandler
-	.thumb_set ADC1_2_IRQHandler,Default_Handler
-
-	.weak	CAN_TX_IRQHandler
-	.thumb_set CAN_TX_IRQHandler,Default_Handler
-
-	.weak	CAN_RX0_IRQHandler
-	.thumb_set CAN_RX0_IRQHandler,Default_Handler
-
-	.weak	CAN_RX1_IRQHandler
-	.thumb_set CAN_RX1_IRQHandler,Default_Handler
-
-	.weak	CAN_SCE_IRQHandler
-	.thumb_set CAN_SCE_IRQHandler,Default_Handler
-
-	.weak	EXTI9_5_IRQHandler
-	.thumb_set EXTI9_5_IRQHandler,Default_Handler
-
-	.weak	TIM1_BRK_TIM15_IRQHandler
-	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
-
-	.weak	TIM1_UP_TIM16_IRQHandler
-	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
-
-	.weak	TIM1_TRG_COM_TIM17_IRQHandler
-	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
-
-	.weak	TIM1_CC_IRQHandler
-	.thumb_set TIM1_CC_IRQHandler,Default_Handler
-
-	.weak	TIM2_IRQHandler
-	.thumb_set TIM2_IRQHandler,Default_Handler
-
-	.weak	TIM3_IRQHandler
-	.thumb_set TIM3_IRQHandler,Default_Handler
-
-	.weak	I2C1_EV_IRQHandler
-	.thumb_set I2C1_EV_IRQHandler,Default_Handler
-
-	.weak	I2C1_ER_IRQHandler
-	.thumb_set I2C1_ER_IRQHandler,Default_Handler
-
-	.weak	SPI1_IRQHandler
-	.thumb_set SPI1_IRQHandler,Default_Handler
-
-	.weak	USART1_IRQHandler
-	.thumb_set USART1_IRQHandler,Default_Handler
-
-	.weak	USART2_IRQHandler
-	.thumb_set USART2_IRQHandler,Default_Handler
-
-	.weak	USART3_IRQHandler
-	.thumb_set USART3_IRQHandler,Default_Handler
-
-	.weak	EXTI15_10_IRQHandler
-	.thumb_set EXTI15_10_IRQHandler,Default_Handler
-
-	.weak	RTC_Alarm_IRQHandler
-	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
-	.weak	TIM6_DAC1_IRQHandler
-	.thumb_set TIM6_DAC1_IRQHandler,Default_Handler
-
-	.weak	TIM7_DAC2_IRQHandler
-	.thumb_set TIM7_DAC2_IRQHandler,Default_Handler
-	
-	.weak	COMP2_IRQHandler
-	.thumb_set COMP2_IRQHandler,Default_Handler
-	
-	.weak	COMP4_6_IRQHandler
-	.thumb_set COMP4_6_IRQHandler,Default_Handler
-	
-	.weak	FPU_IRQHandler
-	.thumb_set FPU_IRQHandler,Default_Handler
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/nucleo-f303k8/syscfg.yml b/hw/bsp/nucleo-f303k8/syscfg.yml
index 3a464adb1b..b442618fc7 100644
--- a/hw/bsp/nucleo-f303k8/syscfg.yml
+++ b/hw/bsp/nucleo-f303k8/syscfg.yml
@@ -23,6 +23,8 @@ syscfg.defs:
         value: 64
 
 syscfg.vals:
+    MCU_RAM_START: 0x20000000
+    MCU_RAM_SIZE: 12K
     REBOOT_LOG_FLASH_AREA: FLASH_AREA_REBOOT_LOG
     CONFIG_FCB_FLASH_AREA: FLASH_AREA_NFFS
     NFFS_FLASH_AREA: FLASH_AREA_NFFS
@@ -47,3 +49,9 @@ syscfg.vals:
     UART_1_PIN_RTS: 'MCU_GPIO_PORTA(12)'
     UART_1_PIN_CTS: 'MCU_GPIO_PORTA(11)'
     TIMER_0_TIM: 'TIM15'
+
+    # Flasher parameters
+    MYNEWT_DOWNLOADER: openocd
+    MYNEWT_DOWNLOADER_OPENOCD_BOARD: board/st_nucleo_f3.cfg
+    MYNEWT_DOWNLOADER_MFG_IMAGE_FLASH_OFFSET: 0x08000000
+    JLINK_TARGET: STM32F303K8
diff --git a/hw/bsp/nucleo-f303re/bsp.yml b/hw/bsp/nucleo-f303re/bsp.yml
index 9a41b0cabf..ca0034debe 100644
--- a/hw/bsp/nucleo-f303re/bsp.yml
+++ b/hw/bsp/nucleo-f303re/bsp.yml
@@ -22,16 +22,9 @@ bsp.url: https://www.st.com/en/evaluation-tools/nucleo-f303re.html
 bsp.maker: "STMicroelectronics"
 bsp.arch: cortex_m4
 bsp.compiler: compiler/arm-none-eabi-m4
-bsp.linkerscript:
-    - "hw/bsp/nucleo-f303re/nucleo-f303re.ld"
-    - "@apache-mynewt-core/hw/mcu/stm/stm32f3xx/stm32f303.ld"
-bsp.linkerscript.BOOT_LOADER.OVERWRITE:
-    - "hw/bsp/nucleo-f303re/boot-nucleo-f303re.ld"
-    - "@apache-mynewt-core/hw/mcu/stm/stm32f3xx/stm32f303.ld"
-bsp.downloadscript: "hw/bsp/nucleo-f303re/nucleo-f303re_download.sh"
+bsp.linkerscript: autogenerated
+bsp.downloadscript: "hw/scripts/download.sh"
 bsp.debugscript: "hw/bsp/nucleo-f303re/nucleo-f303re_debug.sh"
-bsp.downloadscript.WINDOWS.OVERWRITE: "hw/bsp/nucleo-f303re/nucleo-f303re_download.cmd"
-bsp.debugscript.WINDOWS.OVERWRITE: "hw/bsp/nucleo-f303re/nucleo-f303re_debug.cmd"
 
 bsp.flash_map:
     areas:
diff --git a/hw/bsp/nucleo-f303re/link/include/mcu_config.ld.h b/hw/bsp/nucleo-f303re/link/include/mcu_config.ld.h
new file mode 100644
index 0000000000..3596fc2cc1
--- /dev/null
+++ b/hw/bsp/nucleo-f303re/link/include/mcu_config.ld.h
@@ -0,0 +1,33 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+/*
+ * Memory regions placed in CCM
+ * If stack or core data or other section should be place in RAM
+ * <target_name>/link/include/target_config.ld.h should just do:
+ *  #undef BSSNZ_RAM
+ *  #undef COREBSS_RAM
+ *  #undef COREDATA_RAM
+ *  #undef STACK_REGION
+ */
+
+#define BSSNZ_RAM CCM
+#define COREBSS_RAM CCM
+#define COREDATA_RAM CCM
+#define STACK_REGION CCM
diff --git a/hw/bsp/nucleo-f303re/boot-nucleo-f303re.ld b/hw/bsp/nucleo-f303re/link/include/memory_regions.ld.h
similarity index 74%
rename from hw/bsp/nucleo-f303re/boot-nucleo-f303re.ld
rename to hw/bsp/nucleo-f303re/link/include/memory_regions.ld.h
index 7653199243..63fa7bae44 100644
--- a/hw/bsp/nucleo-f303re/boot-nucleo-f303re.ld
+++ b/hw/bsp/nucleo-f303re/link/include/memory_regions.ld.h
@@ -1,4 +1,4 @@
-/**
+/*
  * Licensed to the Apache Software Foundation (ASF) under one
  * or more contributor license agreements.  See the NOTICE file
  * distributed with this work for additional information
@@ -6,7 +6,7 @@
  * to you under the Apache License, Version 2.0 (the
  * "License"); you may not use this file except in compliance
  * with the License.  You may obtain a copy of the License at
- * 
+ *
  *  http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing,
@@ -16,16 +16,10 @@
  * specific language governing permissions and limitations
  * under the License.
  */
-ENTRY(Reset_Handler)
-
-/*
- * Memory map
- */
-MEMORY {
-	FLASH (rx):	ORIGIN = 0x08000000, LENGTH = 36K
-	CCRAM (rw):	ORIGIN = 0x10000000, LENGTH = 16K
-	SRAM  (rw):	ORIGIN = 0x20000000, LENGTH = 64K
-}
 
-/* The bootloader does not contain an image header */
-_imghdr_size = 0x0;
+#ifdef STACK_REGION
+    CCM (rwx) : ORIGIN = 0x10000000, LENGTH = (16K - STACK_SIZE)
+    STACK_RAM (rw) : ORIGIN = 0x10004000 - STACK_SIZE, LENGTH = STACK_SIZE
+#else
+    CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 16K
+#endif
diff --git a/hw/bsp/nucleo-f303re/nucleo-f303re_debug.cmd b/hw/bsp/nucleo-f303re/nucleo-f303re_debug.cmd
deleted file mode 100644
index 3444fd3279..0000000000
--- a/hw/bsp/nucleo-f303re/nucleo-f303re_debug.cmd
+++ /dev/null
@@ -1,22 +0,0 @@
-@rem
-@rem Licensed to the Apache Software Foundation (ASF) under one
-@rem or more contributor license agreements.  See the NOTICE file
-@rem distributed with this work for additional information
-@rem regarding copyright ownership.  The ASF licenses this file
-@rem to you under the Apache License, Version 2.0 (the
-@rem "License"); you may not use this file except in compliance
-@rem with the License.  You may obtain a copy of the License at
-@rem
-@rem  http://www.apache.org/licenses/LICENSE-2.0
-@rem
-@rem Unless required by applicable law or agreed to in writing,
-@rem software distributed under the License is distributed on an
-@rem "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-@rem KIND, either express or implied.  See the License for the
-@rem specific language governing permissions and limitations
-@rem under the License.
-@rem
-
-@rem Execute a shell with a script of the same name and .sh extension
-
-@bash "%~dp0%~n0.sh"
diff --git a/hw/bsp/nucleo-f303re/nucleo-f303re_download.cmd b/hw/bsp/nucleo-f303re/nucleo-f303re_download.cmd
deleted file mode 100644
index 3444fd3279..0000000000
--- a/hw/bsp/nucleo-f303re/nucleo-f303re_download.cmd
+++ /dev/null
@@ -1,22 +0,0 @@
-@rem
-@rem Licensed to the Apache Software Foundation (ASF) under one
-@rem or more contributor license agreements.  See the NOTICE file
-@rem distributed with this work for additional information
-@rem regarding copyright ownership.  The ASF licenses this file
-@rem to you under the Apache License, Version 2.0 (the
-@rem "License"); you may not use this file except in compliance
-@rem with the License.  You may obtain a copy of the License at
-@rem
-@rem  http://www.apache.org/licenses/LICENSE-2.0
-@rem
-@rem Unless required by applicable law or agreed to in writing,
-@rem software distributed under the License is distributed on an
-@rem "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-@rem KIND, either express or implied.  See the License for the
-@rem specific language governing permissions and limitations
-@rem under the License.
-@rem
-
-@rem Execute a shell with a script of the same name and .sh extension
-
-@bash "%~dp0%~n0.sh"
diff --git a/hw/bsp/nucleo-f303re/nucleo-f303re_download.sh b/hw/bsp/nucleo-f303re/nucleo-f303re_download.sh
deleted file mode 100755
index d58c590406..0000000000
--- a/hw/bsp/nucleo-f303re/nucleo-f303re_download.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-# 
-#   http://www.apache.org/licenses/LICENSE-2.0
-# 
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# Called with following variables set:
-#  - BSP_PATH is absolute path to hw/bsp/bsp_name
-#  - BIN_BASENAME is the path to prefix to target binary,
-#    .elf appended to name is the ELF file
-#  - IMAGE_SLOT is the image slot to download to (for non-mfg-image, non-boot)
-#  - FEATURES holds the target features string
-#  - EXTRA_JTAG_CMD holds extra parameters to pass to jtag software
-#  - MFG_IMAGE is "1" if this is a manufacturing image
-
-if [ -z "$BIN_BASENAME" ]; then
-    echo "Need binary to download"
-    exit 1
-fi
-
-IS_BOOTLOADER=0
-
-# Look for 'bootloader' in FEATURES
-for feature in $FEATURES; do
-    if [ $feature == "bootloader" ]; then
-        IS_BOOTLOADER=1
-    fi
-done
-
-if [ $MFG_IMAGE -eq 1 ]; then
-    FLASH_OFFSET=0x08000000
-    FILE_NAME=$BASENAME.bin
-elif [ $IS_BOOTLOADER -eq 1 ]; then
-    FLASH_OFFSET=0x08000000
-    FILE_NAME=$BIN_BASENAME.elf.bin
-else
-    FLASH_OFFSET=0x08008000
-    FILE_NAME=$BIN_BASENAME.img
-fi
-
-echo "Downloading" $FILE_NAME "to" $FLASH_OFFSET
-
-openocd -f board/st_nucleo_f3.cfg -c "$EXTRA_JTAG_CMD" -c "init; reset halt; flash write_image erase $FILE_NAME $FLASH_OFFSET; reset run; shutdown"
-
diff --git a/hw/bsp/nucleo-f303re/pkg.yml b/hw/bsp/nucleo-f303re/pkg.yml
index 3d1f108196..a6f0165d49 100644
--- a/hw/bsp/nucleo-f303re/pkg.yml
+++ b/hw/bsp/nucleo-f303re/pkg.yml
@@ -35,3 +35,5 @@ pkg.cflags.HARDFLOAT:
 pkg.deps:
     - "@apache-mynewt-core/hw/mcu/stm/stm32f3xx"
     - "@apache-mynewt-core/libc"
+    - "@apache-mynewt-core/hw/scripts"
+    - "@apache-mynewt-core/boot/startup"
diff --git a/hw/bsp/nucleo-f303re/src/arch/cortex_m4/startup_stm32f303xe.s b/hw/bsp/nucleo-f303re/src/arch/cortex_m4/startup_stm32f303xe.s
deleted file mode 100644
index b5b58acb19..0000000000
--- a/hw/bsp/nucleo-f303re/src/arch/cortex_m4/startup_stm32f303xe.s
+++ /dev/null
@@ -1,506 +0,0 @@
-/**
-  ******************************************************************************
-  * @file      startup_stm32f303xe.s
-  * @author    MCD Application Team
-  * @brief     STM32F303xE devices vector table for GCC toolchain.
-  *            This module performs:
-  *                - Set the initial SP
-  *                - Set the initial PC == Reset_Handler,
-  *                - Set the vector table entries with the exceptions ISR address,
-  *                - Configure the clock system  
-  *                - Branches to main in the C library (which eventually
-  *                  calls main()).
-  *            After Reset the Cortex-M4 processor is in Thread mode,
-  *            priority is Privileged, and the Stack is set to Main.
-  ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-  .syntax unified
-	.cpu cortex-m4
-	.fpu softvfp
-	.thumb
-
-.global	g_pfnVectors
-.global	Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word	_sidata
-/* start address for the .data section. defined in linker script */
-.word	_sdata
-/* end address for the .data section. defined in linker script */
-.word	_edata
-/* start address for the .bss section. defined in linker script */
-.word	_sbss
-/* end address for the .bss section. defined in linker script */
-.word	_ebss
-
-.equ  BootRAM,        0xF1E0F85F
-/**
- * @brief  This is the code that gets called when the processor first
- *          starts execution following a reset event. Only the absolutely
- *          necessary set is performed, after which the application
- *          supplied main() routine is called.
- * @param  None
- * @retval : None
-*/
-
-    .section	.text.Reset_Handler
-	.weak	Reset_Handler
-	.type	Reset_Handler, %function
-Reset_Handler:
-  ldr   sp, =_estack    /* Atollic update: set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
-  movs	r1, #0
-  b	LoopCopyDataInit
-
-CopyDataInit:
-	ldr	r3, =_sidata
-	ldr	r3, [r3, r1]
-	str	r3, [r0, r1]
-	adds	r1, r1, #4
-
-LoopCopyDataInit:
-	ldr	r0, =_sdata
-	ldr	r3, =_edata
-	adds	r2, r0, r1
-	cmp	r2, r3
-	bcc	CopyDataInit
-	ldr	r2, =_sbss
-	b	LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
-	movs	r3, #0
-	str	r3, [r2], #4
-
-LoopFillZerobss:
-	ldr	r3, = _ebss
-	cmp	r2, r3
-	bcc	FillZerobss
-
-	ldr r0, =__HeapBase
-	ldr r1, =__HeapLimit
-	bl  _sbrkInit
-
-/* Call the clock system intitialization function.*/
-    bl  SystemInit
-/* Call static constructors */
-    bl __libc_init_array
-/* Call the application's entry point.*/
-    bl  _start
-
-LoopForever:
-    b LoopForever
-    
-.size	Reset_Handler, .-Reset_Handler
-
-/**
- * @brief  This is the code that gets called when the processor receives an
- *         unexpected interrupt.  This simply enters an infinite loop, preserving
- *         the system state for examination by a debugger.
- *
- * @param  None
- * @retval : None
-*/
-    .section	.text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
-	b	Infinite_Loop
-	.size	Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex-M4.  Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- 	.section	.isr_vector,"a",%progbits
-	.type	g_pfnVectors, %object
-	.size	g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-	.word	_estack
-	.word	Reset_Handler
-	.word	NMI_Handler
-	.word	HardFault_Handler
-	.word	MemManage_Handler
-	.word	BusFault_Handler
-	.word	UsageFault_Handler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	SVC_Handler
-	.word	DebugMon_Handler
-	.word	0
-	.word	PendSV_Handler
-	.word	SysTick_Handler
-	.word	WWDG_IRQHandler
-	.word	PVD_IRQHandler
-	.word	TAMP_STAMP_IRQHandler
-	.word	RTC_WKUP_IRQHandler
-	.word	FLASH_IRQHandler
-	.word	RCC_IRQHandler
-	.word	EXTI0_IRQHandler
-	.word	EXTI1_IRQHandler
-	.word	EXTI2_TSC_IRQHandler
-	.word	EXTI3_IRQHandler
-	.word	EXTI4_IRQHandler
-	.word	DMA1_Channel1_IRQHandler
-	.word	DMA1_Channel2_IRQHandler
-	.word	DMA1_Channel3_IRQHandler
-	.word	DMA1_Channel4_IRQHandler
-	.word	DMA1_Channel5_IRQHandler
-	.word	DMA1_Channel6_IRQHandler
-	.word	DMA1_Channel7_IRQHandler
-	.word	ADC1_2_IRQHandler
-	.word	USB_HP_CAN_TX_IRQHandler
-	.word	USB_LP_CAN_RX0_IRQHandler
-	.word	CAN_RX1_IRQHandler
-	.word	CAN_SCE_IRQHandler
-	.word	EXTI9_5_IRQHandler
-	.word	TIM1_BRK_TIM15_IRQHandler
-	.word	TIM1_UP_TIM16_IRQHandler
-	.word	TIM1_TRG_COM_TIM17_IRQHandler
-	.word	TIM1_CC_IRQHandler
-	.word	TIM2_IRQHandler
-	.word	TIM3_IRQHandler
-	.word	TIM4_IRQHandler
-	.word	I2C1_EV_IRQHandler
-	.word	I2C1_ER_IRQHandler
-	.word	I2C2_EV_IRQHandler
-	.word	I2C2_ER_IRQHandler
-	.word	SPI1_IRQHandler
-	.word	SPI2_IRQHandler
-	.word	USART1_IRQHandler
-	.word	USART2_IRQHandler
-	.word	USART3_IRQHandler
-	.word	EXTI15_10_IRQHandler
-	.word	RTC_Alarm_IRQHandler
-	.word	USBWakeUp_IRQHandler
-	.word	TIM8_BRK_IRQHandler
-	.word	TIM8_UP_IRQHandler
-	.word	TIM8_TRG_COM_IRQHandler
-	.word	TIM8_CC_IRQHandler
-	.word	ADC3_IRQHandler
-	.word	FMC_IRQHandler
-	.word	0
-	.word	0
-	.word	SPI3_IRQHandler
-	.word	UART4_IRQHandler
-	.word	UART5_IRQHandler
-	.word	TIM6_DAC_IRQHandler
-	.word	TIM7_IRQHandler
-	.word	DMA2_Channel1_IRQHandler
-	.word	DMA2_Channel2_IRQHandler
-	.word	DMA2_Channel3_IRQHandler
-	.word	DMA2_Channel4_IRQHandler
-	.word	DMA2_Channel5_IRQHandler
-	.word	ADC4_IRQHandler
-	.word	0
-	.word	0
-	.word	COMP1_2_3_IRQHandler
-	.word	COMP4_5_6_IRQHandler
-	.word	COMP7_IRQHandler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	I2C3_EV_IRQHandler
-	.word	I2C3_ER_IRQHandler
-	.word	USB_HP_IRQHandler
-	.word	USB_LP_IRQHandler
-	.word	USBWakeUp_RMP_IRQHandler
-	.word	TIM20_BRK_IRQHandler
-	.word	TIM20_UP_IRQHandler
-	.word	TIM20_TRG_COM_IRQHandler
-	.word	TIM20_CC_IRQHandler
-	.word	FPU_IRQHandler
-	.word	0
-	.word	0
-	.word	SPI4_IRQHandler
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
-  .weak	NMI_Handler
-	.thumb_set NMI_Handler,Default_Handler
-
-  .weak	HardFault_Handler
-	.thumb_set HardFault_Handler,Default_Handler
-
-  .weak	MemManage_Handler
-	.thumb_set MemManage_Handler,Default_Handler
-
-  .weak	BusFault_Handler
-	.thumb_set BusFault_Handler,Default_Handler
-
-	.weak	UsageFault_Handler
-	.thumb_set UsageFault_Handler,Default_Handler
-
-	.weak	SVC_Handler
-	.thumb_set SVC_Handler,Default_Handler
-
-	.weak	DebugMon_Handler
-	.thumb_set DebugMon_Handler,Default_Handler
-
-	.weak	PendSV_Handler
-	.thumb_set PendSV_Handler,Default_Handler
-
-	.weak	SysTick_Handler
-	.thumb_set SysTick_Handler,Default_Handler
-
-	.weak	WWDG_IRQHandler
-	.thumb_set WWDG_IRQHandler,Default_Handler
-
-	.weak	PVD_IRQHandler
-	.thumb_set PVD_IRQHandler,Default_Handler
-
-	.weak	TAMP_STAMP_IRQHandler
-	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
-
-	.weak	RTC_WKUP_IRQHandler
-	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
-
-	.weak	FLASH_IRQHandler
-	.thumb_set FLASH_IRQHandler,Default_Handler
-
-	.weak	RCC_IRQHandler
-	.thumb_set RCC_IRQHandler,Default_Handler
-
-	.weak	EXTI0_IRQHandler
-	.thumb_set EXTI0_IRQHandler,Default_Handler
-
-	.weak	EXTI1_IRQHandler
-	.thumb_set EXTI1_IRQHandler,Default_Handler
-
-	.weak	EXTI2_TSC_IRQHandler
-	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
-
-	.weak	EXTI3_IRQHandler
-	.thumb_set EXTI3_IRQHandler,Default_Handler
-
-	.weak	EXTI4_IRQHandler
-	.thumb_set EXTI4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel1_IRQHandler
-	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel2_IRQHandler
-	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel3_IRQHandler
-	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel4_IRQHandler
-	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel5_IRQHandler
-	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel6_IRQHandler
-	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel7_IRQHandler
-	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
-	.weak	ADC1_2_IRQHandler
-	.thumb_set ADC1_2_IRQHandler,Default_Handler
-
-	.weak	USB_HP_CAN_TX_IRQHandler
-	.thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
-
-	.weak	USB_LP_CAN_RX0_IRQHandler
-	.thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
-
-	.weak	CAN_RX1_IRQHandler
-	.thumb_set CAN_RX1_IRQHandler,Default_Handler
-
-	.weak	CAN_SCE_IRQHandler
-	.thumb_set CAN_SCE_IRQHandler,Default_Handler
-
-	.weak	EXTI9_5_IRQHandler
-	.thumb_set EXTI9_5_IRQHandler,Default_Handler
-
-	.weak	TIM1_BRK_TIM15_IRQHandler
-	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
-
-	.weak	TIM1_UP_TIM16_IRQHandler
-	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
-
-	.weak	TIM1_TRG_COM_TIM17_IRQHandler
-	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
-
-	.weak	TIM1_CC_IRQHandler
-	.thumb_set TIM1_CC_IRQHandler,Default_Handler
-
-	.weak	TIM2_IRQHandler
-	.thumb_set TIM2_IRQHandler,Default_Handler
-
-	.weak	TIM3_IRQHandler
-	.thumb_set TIM3_IRQHandler,Default_Handler
-
-	.weak	TIM4_IRQHandler
-	.thumb_set TIM4_IRQHandler,Default_Handler
-
-	.weak	I2C1_EV_IRQHandler
-	.thumb_set I2C1_EV_IRQHandler,Default_Handler
-
-	.weak	I2C1_ER_IRQHandler
-	.thumb_set I2C1_ER_IRQHandler,Default_Handler
-
-	.weak	I2C2_EV_IRQHandler
-	.thumb_set I2C2_EV_IRQHandler,Default_Handler
-
-	.weak	I2C2_ER_IRQHandler
-	.thumb_set I2C2_ER_IRQHandler,Default_Handler
-
-	.weak	SPI1_IRQHandler
-	.thumb_set SPI1_IRQHandler,Default_Handler
-
-	.weak	SPI2_IRQHandler
-	.thumb_set SPI2_IRQHandler,Default_Handler
-
-	.weak	USART1_IRQHandler
-	.thumb_set USART1_IRQHandler,Default_Handler
-
-	.weak	USART2_IRQHandler
-	.thumb_set USART2_IRQHandler,Default_Handler
-
-	.weak	USART3_IRQHandler
-	.thumb_set USART3_IRQHandler,Default_Handler
-
-	.weak	EXTI15_10_IRQHandler
-	.thumb_set EXTI15_10_IRQHandler,Default_Handler
-
-	.weak	RTC_Alarm_IRQHandler
-	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
-	.weak	USBWakeUp_IRQHandler
-	.thumb_set USBWakeUp_IRQHandler,Default_Handler
-
-	.weak	TIM8_BRK_IRQHandler
-	.thumb_set TIM8_BRK_IRQHandler,Default_Handler
-
-	.weak	TIM8_UP_IRQHandler
-	.thumb_set TIM8_UP_IRQHandler,Default_Handler
-
-	.weak	TIM8_TRG_COM_IRQHandler
-	.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
-
-	.weak	TIM8_CC_IRQHandler
-	.thumb_set TIM8_CC_IRQHandler,Default_Handler
-
-	.weak	ADC3_IRQHandler
-	.thumb_set ADC3_IRQHandler,Default_Handler
-
-	.weak	FMC_IRQHandler
-	.thumb_set FMC_IRQHandler,Default_Handler
-
-	.weak	SPI3_IRQHandler
-	.thumb_set SPI3_IRQHandler,Default_Handler
-
-	.weak	UART4_IRQHandler
-	.thumb_set UART4_IRQHandler,Default_Handler
-
-	.weak	UART5_IRQHandler
-	.thumb_set UART5_IRQHandler,Default_Handler
-
-	.weak	TIM6_DAC_IRQHandler
-	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
-	.weak	TIM7_IRQHandler
-	.thumb_set TIM7_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel1_IRQHandler
-	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel2_IRQHandler
-	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel3_IRQHandler
-	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel4_IRQHandler
-	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel5_IRQHandler
-	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
-
-	.weak	ADC4_IRQHandler
-	.thumb_set ADC4_IRQHandler,Default_Handler	
-	
-	.weak	COMP1_2_3_IRQHandler
-	.thumb_set COMP1_2_3_IRQHandler,Default_Handler
-	
-	.weak	COMP4_5_6_IRQHandler
-	.thumb_set COMP4_5_6_IRQHandler,Default_Handler
-	
-	.weak	COMP7_IRQHandler
-	.thumb_set COMP7_IRQHandler,Default_Handler	
-	
-	.weak	I2C3_EV_IRQHandler
-	.thumb_set I2C3_EV_IRQHandler,Default_Handler	
-	
-	.weak	I2C3_ER_IRQHandler
-	.thumb_set I2C3_ER_IRQHandler,Default_Handler	
-	
-	.weak	USB_HP_IRQHandler
-	.thumb_set USB_HP_IRQHandler,Default_Handler
-	
-	.weak	USB_LP_IRQHandler
-	.thumb_set USB_LP_IRQHandler,Default_Handler
-	
-	.weak	USBWakeUp_RMP_IRQHandler
-	.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
-	
-	.weak	TIM20_BRK_IRQHandler
-	.thumb_set TIM20_BRK_IRQHandler,Default_Handler
-	
-	.weak	TIM20_UP_IRQHandler
-	.thumb_set TIM20_UP_IRQHandler,Default_Handler
-	
-	.weak	TIM20_TRG_COM_IRQHandler
-	.thumb_set TIM20_TRG_COM_IRQHandler,Default_Handler
-	
-	.weak	TIM20_CC_IRQHandler
-	.thumb_set TIM20_CC_IRQHandler,Default_Handler
-	
-	.weak	FPU_IRQHandler
-	.thumb_set FPU_IRQHandler,Default_Handler
-	
-	.weak	SPI4_IRQHandler
-	.thumb_set SPI4_IRQHandler,Default_Handler
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/nucleo-f303re/syscfg.yml b/hw/bsp/nucleo-f303re/syscfg.yml
index 24090ce005..c8529144eb 100644
--- a/hw/bsp/nucleo-f303re/syscfg.yml
+++ b/hw/bsp/nucleo-f303re/syscfg.yml
@@ -23,8 +23,11 @@ syscfg.defs:
         value: 512
 
 syscfg.vals:
+    MCU_RAM_START: 0x20000000
+    MCU_RAM_SIZE: 64K
     REBOOT_LOG_FLASH_AREA: FLASH_AREA_REBOOT_LOG
     CONFIG_FCB_FLASH_AREA: FLASH_AREA_NFFS
+    CONFIG_FCB_NUM_AREAS: 23
     NFFS_FLASH_AREA: FLASH_AREA_NFFS
     COREDUMP_FLASH_AREA: FLASH_AREA_IMAGE_1
     STM32_CLOCK_HSI: 1
@@ -47,3 +50,9 @@ syscfg.vals:
     UART_1_PIN_RTS: 'MCU_GPIO_PORTA(12)'
     UART_1_PIN_CTS: 'MCU_GPIO_PORTA(11)'
     TIMER_0_TIM: 'TIM15'
+
+    # Flasher parameters
+    MYNEWT_DOWNLOADER: openocd
+    MYNEWT_DOWNLOADER_OPENOCD_BOARD: board/st_nucleo_f3.cfg
+    MYNEWT_DOWNLOADER_MFG_IMAGE_FLASH_OFFSET: 0x08000000
+    JLINK_TARGET: STM32F303RE
diff --git a/hw/bsp/stm32f3discovery/bsp.yml b/hw/bsp/stm32f3discovery/bsp.yml
index 308dadf700..7ce292e86d 100644
--- a/hw/bsp/stm32f3discovery/bsp.yml
+++ b/hw/bsp/stm32f3discovery/bsp.yml
@@ -22,16 +22,9 @@ bsp.url: https://www.st.com/en/evaluation-tools/stm32f3discovery.html
 bsp.maker: "STMicroelectronics"
 bsp.arch: cortex_m4
 bsp.compiler: compiler/arm-none-eabi-m4
-bsp.linkerscript:
-    - "hw/bsp/stm32f3discovery/stm32f3discovery.ld"
-    - "@apache-mynewt-core/hw/mcu/stm/stm32f3xx/stm32f303.ld"
-bsp.linkerscript.BOOT_LOADER.OVERWRITE:
-    - "hw/bsp/stm32f3discovery/boot-stm32f3discovery.ld"
-    - "@apache-mynewt-core/hw/mcu/stm/stm32f3xx/stm32f303.ld"
-bsp.downloadscript: "hw/bsp/stm32f3discovery/stm32f3discovery_download.sh"
+bsp.linkerscript: autogenerated
+bsp.downloadscript: "hw/scripts/download.sh"
 bsp.debugscript: "hw/bsp/stm32f3discovery/stm32f3discovery_debug.sh"
-bsp.downloadscript.WINDOWS.OVERWRITE: "hw/bsp/stm32f3discovery/stm32f3discovery_download.cmd"
-bsp.debugscript.WINDOWS.OVERWRITE: "hw/bsp/stm32f3discovery/stm32f3discovery_debug.cmd"
 
 bsp.flash_map:
     areas:
diff --git a/hw/bsp/stm32f3discovery/link/include/mcu_config.ld.h b/hw/bsp/stm32f3discovery/link/include/mcu_config.ld.h
new file mode 100644
index 0000000000..3596fc2cc1
--- /dev/null
+++ b/hw/bsp/stm32f3discovery/link/include/mcu_config.ld.h
@@ -0,0 +1,33 @@
+/*
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+
+/*
+ * Memory regions placed in CCM
+ * If stack or core data or other section should be place in RAM
+ * <target_name>/link/include/target_config.ld.h should just do:
+ *  #undef BSSNZ_RAM
+ *  #undef COREBSS_RAM
+ *  #undef COREDATA_RAM
+ *  #undef STACK_REGION
+ */
+
+#define BSSNZ_RAM CCM
+#define COREBSS_RAM CCM
+#define COREDATA_RAM CCM
+#define STACK_REGION CCM
diff --git a/hw/bsp/nucleo-f303re/nucleo-f303re.ld b/hw/bsp/stm32f3discovery/link/include/memory_regions.ld.h
similarity index 73%
rename from hw/bsp/nucleo-f303re/nucleo-f303re.ld
rename to hw/bsp/stm32f3discovery/link/include/memory_regions.ld.h
index ce600e5f6f..9a1e8d1f3a 100644
--- a/hw/bsp/nucleo-f303re/nucleo-f303re.ld
+++ b/hw/bsp/stm32f3discovery/link/include/memory_regions.ld.h
@@ -1,4 +1,4 @@
-/**
+/*
  * Licensed to the Apache Software Foundation (ASF) under one
  * or more contributor license agreements.  See the NOTICE file
  * distributed with this work for additional information
@@ -6,7 +6,7 @@
  * to you under the Apache License, Version 2.0 (the
  * "License"); you may not use this file except in compliance
  * with the License.  You may obtain a copy of the License at
- * 
+ *
  *  http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing,
@@ -16,17 +16,10 @@
  * specific language governing permissions and limitations
  * under the License.
  */
-ENTRY(Reset_Handler)
 
-/*
- * Memory map
- */
-MEMORY {
-	FLASH (rx):	ORIGIN = 0x08008000, LENGTH = 192K
-	CCRAM (rw):	ORIGIN = 0x10000000, LENGTH =  16K
-	SRAM  (rw):	ORIGIN = 0x20000000, LENGTH =  64K
-}
-/*
- * Image header size - no bootloader support, no header.
- */
-_imghdr_size = 0x20;
+#ifdef STACK_REGION
+    CCM (rwx) : ORIGIN = 0x10000000, LENGTH = (8K - STACK_SIZE)
+    STACK_RAM (rw) : ORIGIN = 0x10002000 - STACK_SIZE, LENGTH = STACK_SIZE
+#else
+    CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 8K
+#endif
diff --git a/hw/bsp/stm32f3discovery/pkg.yml b/hw/bsp/stm32f3discovery/pkg.yml
index d6ff24ebe4..b1e06542dc 100644
--- a/hw/bsp/stm32f3discovery/pkg.yml
+++ b/hw/bsp/stm32f3discovery/pkg.yml
@@ -35,6 +35,8 @@ pkg.cflags.HARDFLOAT:
 pkg.deps:
     - "@apache-mynewt-core/hw/mcu/stm/stm32f3xx"
     - "@apache-mynewt-core/libc"
+    - "@apache-mynewt-core/hw/scripts"
+    - "@apache-mynewt-core/boot/startup"
 
 pkg.deps.LSM303DLHC_ONB:
     - "@apache-mynewt-core/hw/drivers/sensors/lsm303dlhc"
diff --git a/hw/bsp/stm32f3discovery/src/arch/cortex_m4/startup_stm32f303xc.s b/hw/bsp/stm32f3discovery/src/arch/cortex_m4/startup_stm32f303xc.s
deleted file mode 100644
index d62443f19e..0000000000
--- a/hw/bsp/stm32f3discovery/src/arch/cortex_m4/startup_stm32f303xc.s
+++ /dev/null
@@ -1,493 +0,0 @@
-/**
-  ******************************************************************************
-  * @file      startup_stm32f303xc.s
-  * @author    MCD Application Team
-  * @brief     STM32F303xB/STM32F303xC devices vector table for GCC toolchain.
-  *            This module performs:
-  *                - Set the initial SP
-  *                - Set the initial PC == Reset_Handler,
-  *                - Set the vector table entries with the exceptions ISR address,
-  *                - Configure the clock system  
-  *                - Branches to main in the C library (which eventually
-  *                  calls main()).
-  *            After Reset the Cortex-M4 processor is in Thread mode,
-  *            priority is Privileged, and the Stack is set to Main.
-  ******************************************************************************
-  * 
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-  .syntax unified
-	.cpu cortex-m4
-	.fpu softvfp
-	.thumb
-
-.global	g_pfnVectors
-.global	Default_Handler
-
-/* start address for the initialization values of the .data section.
-defined in linker script */
-.word	_sidata
-/* start address for the .data section. defined in linker script */
-.word	_sdata
-/* end address for the .data section. defined in linker script */
-.word	_edata
-/* start address for the .bss section. defined in linker script */
-.word	_sbss
-/* end address for the .bss section. defined in linker script */
-.word	_ebss
-
-.equ  BootRAM,        0xF1E0F85F
-/**
- * @brief  This is the code that gets called when the processor first
- *          starts execution following a reset event. Only the absolutely
- *          necessary set is performed, after which the application
- *          supplied main() routine is called.
- * @param  None
- * @retval : None
-*/
-
-    .section	.text.Reset_Handler
-	.weak	Reset_Handler
-	.type	Reset_Handler, %function
-Reset_Handler:
-  ldr   sp, =_estack    /* Atollic update: set stack pointer */
-
-/* Copy the data segment initializers from flash to SRAM */
-  movs	r1, #0
-  b	LoopCopyDataInit
-
-CopyDataInit:
-	ldr	r3, =_sidata
-	ldr	r3, [r3, r1]
-	str	r3, [r0, r1]
-	adds	r1, r1, #4
-
-LoopCopyDataInit:
-	ldr	r0, =_sdata
-	ldr	r3, =_edata
-	adds	r2, r0, r1
-	cmp	r2, r3
-	bcc	CopyDataInit
-	ldr	r2, =_sbss
-	b	LoopFillZerobss
-/* Zero fill the bss segment. */
-FillZerobss:
-	movs	r3, #0
-	str	r3, [r2], #4
-
-LoopFillZerobss:
-	ldr	r3, = _ebss
-	cmp	r2, r3
-	bcc	FillZerobss
-
-/*
- * Mynewt specific corebss clearing.
- */
-	ldr   r2, =__corebss_start__
-	b     LoopFillZeroCoreBss
-
-/* Zero fill the bss segment. */
-FillZeroCoreBss:
-	movs  r3, #0
-	str   r3, [r2], #4
-
-LoopFillZeroCoreBss:
-	ldr   r3, =__corebss_end__
-	cmp   r2, r3
-	bcc   FillZeroCoreBss
-
-	ldr   r0, =__HeapBase
-	ldr   r1, =__HeapLimit
-	bl    _sbrkInit
-
-/* Call the clock system initialization function.*/
-	bl  SystemInit
-/* Call the application's entry point.*/
-	bl  _start
-
-LoopForever:
-	b LoopForever
-
-.size	Reset_Handler, .-Reset_Handler
-
-/**
- * @brief  This is the code that gets called when the processor receives an
- *         unexpected interrupt.  This simply enters an infinite loop, preserving
- *         the system state for examination by a debugger.
- *
- * @param  None
- * @retval : None
-*/
-    .section	.text.Default_Handler,"ax",%progbits
-Default_Handler:
-Infinite_Loop:
-	b	Infinite_Loop
-	.size	Default_Handler, .-Default_Handler
-/******************************************************************************
-*
-* The minimal vector table for a Cortex-M4.  Note that the proper constructs
-* must be placed on this to ensure that it ends up at physical address
-* 0x0000.0000.
-*
-******************************************************************************/
- 	.section	.isr_vector,"a",%progbits
-	.type	g_pfnVectors, %object
-	.size	g_pfnVectors, .-g_pfnVectors
-
-
-g_pfnVectors:
-	.word	_estack
-	.word	Reset_Handler
-	.word	NMI_Handler
-	.word	HardFault_Handler
-	.word	MemManage_Handler
-	.word	BusFault_Handler
-	.word	UsageFault_Handler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	SVC_Handler
-	.word	DebugMon_Handler
-	.word	0
-	.word	PendSV_Handler
-	.word	SysTick_Handler
-	.word	WWDG_IRQHandler
-	.word	PVD_IRQHandler
-	.word	TAMP_STAMP_IRQHandler
-	.word	RTC_WKUP_IRQHandler
-	.word	FLASH_IRQHandler
-	.word	RCC_IRQHandler
-	.word	EXTI0_IRQHandler
-	.word	EXTI1_IRQHandler
-	.word	EXTI2_TSC_IRQHandler
-	.word	EXTI3_IRQHandler
-	.word	EXTI4_IRQHandler
-	.word	DMA1_Channel1_IRQHandler
-	.word	DMA1_Channel2_IRQHandler
-	.word	DMA1_Channel3_IRQHandler
-	.word	DMA1_Channel4_IRQHandler
-	.word	DMA1_Channel5_IRQHandler
-	.word	DMA1_Channel6_IRQHandler
-	.word	DMA1_Channel7_IRQHandler
-	.word	ADC1_2_IRQHandler
-	.word	USB_HP_CAN_TX_IRQHandler
-	.word	USB_LP_CAN_RX0_IRQHandler
-	.word	CAN_RX1_IRQHandler
-	.word	CAN_SCE_IRQHandler
-	.word	EXTI9_5_IRQHandler
-	.word	TIM1_BRK_TIM15_IRQHandler
-	.word	TIM1_UP_TIM16_IRQHandler
-	.word	TIM1_TRG_COM_TIM17_IRQHandler
-	.word	TIM1_CC_IRQHandler
-	.word	TIM2_IRQHandler
-	.word	TIM3_IRQHandler
-	.word	TIM4_IRQHandler
-	.word	I2C1_EV_IRQHandler
-	.word	I2C1_ER_IRQHandler
-	.word	I2C2_EV_IRQHandler
-	.word	I2C2_ER_IRQHandler
-	.word	SPI1_IRQHandler
-	.word	SPI2_IRQHandler
-	.word	USART1_IRQHandler
-	.word	USART2_IRQHandler
-	.word	USART3_IRQHandler
-	.word	EXTI15_10_IRQHandler
-	.word	RTC_Alarm_IRQHandler
-	.word	USBWakeUp_IRQHandler
-	.word	TIM8_BRK_IRQHandler
-	.word	TIM8_UP_IRQHandler
-	.word	TIM8_TRG_COM_IRQHandler
-	.word	TIM8_CC_IRQHandler
-	.word	ADC3_IRQHandler
-	.word	0
-	.word	0
-	.word	0
-	.word	SPI3_IRQHandler
-	.word	UART4_IRQHandler
-	.word	UART5_IRQHandler
-	.word	TIM6_DAC_IRQHandler
-	.word	TIM7_IRQHandler
-	.word	DMA2_Channel1_IRQHandler
-	.word	DMA2_Channel2_IRQHandler
-	.word	DMA2_Channel3_IRQHandler
-	.word	DMA2_Channel4_IRQHandler
-	.word	DMA2_Channel5_IRQHandler
-	.word	ADC4_IRQHandler
-	.word	0
-	.word	0
-	.word	COMP1_2_3_IRQHandler
-	.word	COMP4_5_6_IRQHandler
-	.word	COMP7_IRQHandler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	USB_HP_IRQHandler
-	.word	USB_LP_IRQHandler
-	.word	USBWakeUp_RMP_IRQHandler
-	.word	0
-	.word	0
-	.word	0
-	.word	0
-	.word	FPU_IRQHandler
-
-/*******************************************************************************
-*
-* Provide weak aliases for each Exception handler to the Default_Handler.
-* As they are weak aliases, any function with the same name will override
-* this definition.
-*
-*******************************************************************************/
-
-  .weak	NMI_Handler
-	.thumb_set NMI_Handler,Default_Handler
-
-  .weak	HardFault_Handler
-	.thumb_set HardFault_Handler,Default_Handler
-
-  .weak	MemManage_Handler
-	.thumb_set MemManage_Handler,Default_Handler
-
-  .weak	BusFault_Handler
-	.thumb_set BusFault_Handler,Default_Handler
-
-	.weak	UsageFault_Handler
-	.thumb_set UsageFault_Handler,Default_Handler
-
-	.weak	SVC_Handler
-	.thumb_set SVC_Handler,Default_Handler
-
-	.weak	DebugMon_Handler
-	.thumb_set DebugMon_Handler,Default_Handler
-
-	.weak	PendSV_Handler
-	.thumb_set PendSV_Handler,Default_Handler
-
-	.weak	SysTick_Handler
-	.thumb_set SysTick_Handler,Default_Handler
-
-	.weak	WWDG_IRQHandler
-	.thumb_set WWDG_IRQHandler,Default_Handler
-
-	.weak	PVD_IRQHandler
-	.thumb_set PVD_IRQHandler,Default_Handler
-
-	.weak	TAMP_STAMP_IRQHandler
-	.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
-
-	.weak	RTC_WKUP_IRQHandler
-	.thumb_set RTC_WKUP_IRQHandler,Default_Handler
-
-	.weak	FLASH_IRQHandler
-	.thumb_set FLASH_IRQHandler,Default_Handler
-
-	.weak	RCC_IRQHandler
-	.thumb_set RCC_IRQHandler,Default_Handler
-
-	.weak	EXTI0_IRQHandler
-	.thumb_set EXTI0_IRQHandler,Default_Handler
-
-	.weak	EXTI1_IRQHandler
-	.thumb_set EXTI1_IRQHandler,Default_Handler
-
-	.weak	EXTI2_TSC_IRQHandler
-	.thumb_set EXTI2_TSC_IRQHandler,Default_Handler
-
-	.weak	EXTI3_IRQHandler
-	.thumb_set EXTI3_IRQHandler,Default_Handler
-
-	.weak	EXTI4_IRQHandler
-	.thumb_set EXTI4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel1_IRQHandler
-	.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel2_IRQHandler
-	.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel3_IRQHandler
-	.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel4_IRQHandler
-	.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel5_IRQHandler
-	.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel6_IRQHandler
-	.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
-
-	.weak	DMA1_Channel7_IRQHandler
-	.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
-
-	.weak	ADC1_2_IRQHandler
-	.thumb_set ADC1_2_IRQHandler,Default_Handler
-
-	.weak	USB_HP_CAN_TX_IRQHandler
-	.thumb_set USB_HP_CAN_TX_IRQHandler,Default_Handler
-
-	.weak	USB_LP_CAN_RX0_IRQHandler
-	.thumb_set USB_LP_CAN_RX0_IRQHandler,Default_Handler
-
-	.weak	CAN_RX1_IRQHandler
-	.thumb_set CAN_RX1_IRQHandler,Default_Handler
-
-	.weak	CAN_SCE_IRQHandler
-	.thumb_set CAN_SCE_IRQHandler,Default_Handler
-
-	.weak	EXTI9_5_IRQHandler
-	.thumb_set EXTI9_5_IRQHandler,Default_Handler
-
-	.weak	TIM1_BRK_TIM15_IRQHandler
-	.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
-
-	.weak	TIM1_UP_TIM16_IRQHandler
-	.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
-
-	.weak	TIM1_TRG_COM_TIM17_IRQHandler
-	.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
-
-	.weak	TIM1_CC_IRQHandler
-	.thumb_set TIM1_CC_IRQHandler,Default_Handler
-
-	.weak	TIM2_IRQHandler
-	.thumb_set TIM2_IRQHandler,Default_Handler
-
-	.weak	TIM3_IRQHandler
-	.thumb_set TIM3_IRQHandler,Default_Handler
-
-	.weak	TIM4_IRQHandler
-	.thumb_set TIM4_IRQHandler,Default_Handler
-
-	.weak	I2C1_EV_IRQHandler
-	.thumb_set I2C1_EV_IRQHandler,Default_Handler
-
-	.weak	I2C1_ER_IRQHandler
-	.thumb_set I2C1_ER_IRQHandler,Default_Handler
-
-	.weak	I2C2_EV_IRQHandler
-	.thumb_set I2C2_EV_IRQHandler,Default_Handler
-
-	.weak	I2C2_ER_IRQHandler
-	.thumb_set I2C2_ER_IRQHandler,Default_Handler
-
-	.weak	SPI1_IRQHandler
-	.thumb_set SPI1_IRQHandler,Default_Handler
-
-	.weak	SPI2_IRQHandler
-	.thumb_set SPI2_IRQHandler,Default_Handler
-
-	.weak	USART1_IRQHandler
-	.thumb_set USART1_IRQHandler,Default_Handler
-
-	.weak	USART2_IRQHandler
-	.thumb_set USART2_IRQHandler,Default_Handler
-
-	.weak	USART3_IRQHandler
-	.thumb_set USART3_IRQHandler,Default_Handler
-
-	.weak	EXTI15_10_IRQHandler
-	.thumb_set EXTI15_10_IRQHandler,Default_Handler
-
-	.weak	RTC_Alarm_IRQHandler
-	.thumb_set RTC_Alarm_IRQHandler,Default_Handler
-
-	.weak	USBWakeUp_IRQHandler
-	.thumb_set USBWakeUp_IRQHandler,Default_Handler
-
-	.weak	TIM8_BRK_IRQHandler
-	.thumb_set TIM8_BRK_IRQHandler,Default_Handler
-
-	.weak	TIM8_UP_IRQHandler
-	.thumb_set TIM8_UP_IRQHandler,Default_Handler
-
-	.weak	TIM8_TRG_COM_IRQHandler
-	.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
-
-	.weak	TIM8_CC_IRQHandler
-	.thumb_set TIM8_CC_IRQHandler,Default_Handler
-
-	.weak	ADC3_IRQHandler
-	.thumb_set ADC3_IRQHandler,Default_Handler
-
-	.weak	SPI3_IRQHandler
-	.thumb_set SPI3_IRQHandler,Default_Handler
-
-	.weak	UART4_IRQHandler
-	.thumb_set UART4_IRQHandler,Default_Handler
-
-	.weak	UART5_IRQHandler
-	.thumb_set UART5_IRQHandler,Default_Handler
-
-	.weak	TIM6_DAC_IRQHandler
-	.thumb_set TIM6_DAC_IRQHandler,Default_Handler
-
-	.weak	TIM7_IRQHandler
-	.thumb_set TIM7_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel1_IRQHandler
-	.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel2_IRQHandler
-	.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel3_IRQHandler
-	.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel4_IRQHandler
-	.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
-
-	.weak	DMA2_Channel5_IRQHandler
-	.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
-
-	.weak	ADC4_IRQHandler
-	.thumb_set ADC4_IRQHandler,Default_Handler	
-	
-	.weak	COMP1_2_3_IRQHandler
-	.thumb_set COMP1_2_3_IRQHandler,Default_Handler
-	
-	.weak	COMP4_5_6_IRQHandler
-	.thumb_set COMP4_5_6_IRQHandler,Default_Handler
-	
-	.weak	COMP7_IRQHandler
-	.thumb_set COMP7_IRQHandler,Default_Handler	
-	
-	.weak	USB_HP_IRQHandler
-	.thumb_set USB_HP_IRQHandler,Default_Handler
-	
-	.weak	USB_LP_IRQHandler
-	.thumb_set USB_LP_IRQHandler,Default_Handler
-	
-	.weak	USBWakeUp_RMP_IRQHandler
-	.thumb_set USBWakeUp_RMP_IRQHandler,Default_Handler
-	
-	.weak	FPU_IRQHandler
-	.thumb_set FPU_IRQHandler,Default_Handler
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f3discovery/stm32f3discovery_debug.cmd b/hw/bsp/stm32f3discovery/stm32f3discovery_debug.cmd
deleted file mode 100644
index 3444fd3279..0000000000
--- a/hw/bsp/stm32f3discovery/stm32f3discovery_debug.cmd
+++ /dev/null
@@ -1,22 +0,0 @@
-@rem
-@rem Licensed to the Apache Software Foundation (ASF) under one
-@rem or more contributor license agreements.  See the NOTICE file
-@rem distributed with this work for additional information
-@rem regarding copyright ownership.  The ASF licenses this file
-@rem to you under the Apache License, Version 2.0 (the
-@rem "License"); you may not use this file except in compliance
-@rem with the License.  You may obtain a copy of the License at
-@rem
-@rem  http://www.apache.org/licenses/LICENSE-2.0
-@rem
-@rem Unless required by applicable law or agreed to in writing,
-@rem software distributed under the License is distributed on an
-@rem "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-@rem KIND, either express or implied.  See the License for the
-@rem specific language governing permissions and limitations
-@rem under the License.
-@rem
-
-@rem Execute a shell with a script of the same name and .sh extension
-
-@bash "%~dp0%~n0.sh"
diff --git a/hw/bsp/stm32f3discovery/stm32f3discovery_download.cmd b/hw/bsp/stm32f3discovery/stm32f3discovery_download.cmd
deleted file mode 100644
index 3444fd3279..0000000000
--- a/hw/bsp/stm32f3discovery/stm32f3discovery_download.cmd
+++ /dev/null
@@ -1,22 +0,0 @@
-@rem
-@rem Licensed to the Apache Software Foundation (ASF) under one
-@rem or more contributor license agreements.  See the NOTICE file
-@rem distributed with this work for additional information
-@rem regarding copyright ownership.  The ASF licenses this file
-@rem to you under the Apache License, Version 2.0 (the
-@rem "License"); you may not use this file except in compliance
-@rem with the License.  You may obtain a copy of the License at
-@rem
-@rem  http://www.apache.org/licenses/LICENSE-2.0
-@rem
-@rem Unless required by applicable law or agreed to in writing,
-@rem software distributed under the License is distributed on an
-@rem "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-@rem KIND, either express or implied.  See the License for the
-@rem specific language governing permissions and limitations
-@rem under the License.
-@rem
-
-@rem Execute a shell with a script of the same name and .sh extension
-
-@bash "%~dp0%~n0.sh"
diff --git a/hw/bsp/stm32f3discovery/stm32f3discovery_download.sh b/hw/bsp/stm32f3discovery/stm32f3discovery_download.sh
deleted file mode 100755
index da98d4209c..0000000000
--- a/hw/bsp/stm32f3discovery/stm32f3discovery_download.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/bash
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# Called with following variables set:
-#  - CORE_PATH is absolute path to @apache-mynewt-core
-#  - BSP_PATH is absolute path to hw/bsp/bsp_name
-#  - BIN_BASENAME is the path to prefix to target binary,
-#    .elf appended to name is the ELF file
-#  - IMAGE_SLOT is the image slot to download to (for non-mfg-image, non-boot)
-#  - FEATURES holds the target features string
-#  - EXTRA_JTAG_CMD holds extra parameters to pass to jtag software
-#  - MFG_IMAGE is "1" if this is a manufacturing image
-#  - FLASH_OFFSET contains the flash offset to download to
-#  - BOOT_LOADER is set if downloading a bootloader
-. $CORE_PATH/hw/scripts/openocd.sh
-
-CFG="-f board/stm32f3discovery.cfg"
-
-if [ "$MFG_IMAGE" ]; then
-    FLASH_OFFSET=0x08000000
-fi
-
-common_file_to_load
-openocd_load
-openocd_reset_run
diff --git a/hw/bsp/stm32f3discovery/syscfg.yml b/hw/bsp/stm32f3discovery/syscfg.yml
index 8cf94dffdf..c00eedbbcf 100644
--- a/hw/bsp/stm32f3discovery/syscfg.yml
+++ b/hw/bsp/stm32f3discovery/syscfg.yml
@@ -32,6 +32,8 @@ syscfg.defs:
         value: 400
 
 syscfg.vals:
+    MCU_RAM_START: 0x20000000
+    MCU_RAM_SIZE: 48K
     REBOOT_LOG_FLASH_AREA: FLASH_AREA_REBOOT_LOG
     CONFIG_FCB_FLASH_AREA: FLASH_AREA_NFFS
     CONFIG_FCB_NUM_AREAS: 16
@@ -67,5 +69,11 @@ syscfg.vals:
     TIMER_1_TIM: 'TIM16'
     TIMER_2_TIM: 'TIM17'
 
+    # Flasher parameters
+    MYNEWT_DOWNLOADER: openocd
+    MYNEWT_DOWNLOADER_OPENOCD_BOARD: board/stm32f3discovery.cfg
+    MYNEWT_DOWNLOADER_MFG_IMAGE_FLASH_OFFSET: 0x08000000
+    JLINK_TARGET: STM32F303VC
+
 syscfg.restrictions:
     - "!LSM303DLHC_ONB || I2C_0"