junipernetworks.junos.junos_static_routes_module.rst

junipernetworks.junos.junos_static_routes

Static routes resource module

Version added: 1.0.0

• Synopsis
• Requirements
• Parameters
• Notes
• Examples
• Return Values
• Status

Synopsis

• This module provides declarative management of static routes on Juniper JUNOS devices

Requirements

The below requirements are needed on the host that executes this module.

• ncclient (>=v0.6.4)
• xmltodict (>=0.12)

Parameters

Parameter					Choices/Defaults	Comments
config list / elements=dictionary						A dictionary of static routes options
	address_families list / elements=dictionary					Address family to use for the static routes
		afi string / required			Choices: ipv4 ipv6	afi to use for the static routes
		routes list / elements=dictionary				Static route configuration
			dest string			Static route destination including prefix
			metric integer			Metric value for the static route
			next_hop list / elements=dictionary			Next hop to destination
				forward_router_address string		List of next hops
	vrf string					Virtual Routing and Forwarding (VRF) name
running_config string						This option is used only with state parsed. The value of this option should be the output received from the Junos device by executing the command show routing-options. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result
state string					Choices: merged ← replaced overridden deleted gathered rendered parsed	The state the configuration should be left in

Notes

Note

• This module requires the netconf system service be enabled on the device being managed.
• This module works with connection netconf. See the Junos OS Platform Options.
• Tested against JunOS v18.4R1

Examples

# Using deleted

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

- name: Delete provided configuration (default operation is merge)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.16.0/24
                next_hop:
                  - forward_router_address: 172.16.1.2
    state: deleted

# Task Output
# -----------
# before:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# commands:
#   - '<nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route
#     delete="delete"><nc:name>192.168.16.0/24</nc:name></nc:route></nc:static></nc:routing-options>'
#   - '<nc:routing-instances xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>'
# after:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
# }

# Using merged

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
# }

- name: Merge provided configuration with device configuration (default operation
    is merge)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.16.0/24
                next_hop:
                  - forward_router_address: 172.16.1.2
    state: merged

# Task Output
# -----------
# before:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# commands:
#   - '<nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route><nc:name>192.168.16.0/24</nc:name>
#     <nc:next-hop>172.16.1.2</nc:next-hop></nc:route></nc:static></nc:routing-options>'
#   - '<nc:routing-instances xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>'
# after:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

# Using overridden

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

- name: Override running configuration with provided configuration (default operation
    is merge)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.16.0/24
                next_hop:
                  - forward_router_address: 172.16.0.1
    state: overridden
# Task Output:
# ------------
# before:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# commands:
#   - >-
#     <nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route
#     delete="delete"><nc:name>192.168.47.0/24</nc:name></nc:route><nc:route
#     delete="delete"><nc:name>192.168.16.0/24</nc:name></nc:route></nc:static><nc:static><nc:route><nc:name>192.168.16.0/24</nc:name><nc:next-hop>172.16.0.1</nc:next-hop></nc:route></nc:static></nc:routing-options>
#   - '<nc:routing-instances xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>'
# after:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.0.1

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.16.0/24 next-hop 172.16.0.1;
# }

# Using replaced

# Before state
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 172.16.1.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

- name: Replace provided configuration with device configuration (default operation
    is merge)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.47.0/24
                next_hop:
                  - forward_router_address: 10.200.16.2
    state: replaced

# Task Output:
# ------------
# before:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
# commands:
#   - >-
#     <nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route
#     delete="delete"><nc:name>192.168.47.0/24</nc:name></nc:route></nc:static><nc:static><nc:route><nc:name>192.168.47.0/24</nc:name><nc:next-hop>10.200.16.2</nc:next-hop></nc:route></nc:static></nc:routing-options>
#   - '<nc:routing-instances xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"/>'
# after:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 10.200.16.2

# After state:
# ------------
#
# admin# show routing-options
# static {
#     route 192.168.47.0/24 next-hop 10.200.16.2;
#     route 192.168.16.0/24 next-hop 172.16.1.2;
# }

# Using gathered to gather static route facts from the device
# Before state
# ------------
# admin# show routing-options
# static {
#     route 192.168.16.0/24 next-hop 172.16.1.2;
#     route 192.168.47.0/24 next-hop 10.200.16.2;
# }
- name: Gather static routes facts from the device using junos_static_routes module
  junipernetworks.junos.junos_static_routes:
    state: gathered

# Task output:
# ------------
# gathered:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: 172.16.1.2
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 10.200.16.2

# Using rendered

- name: Render platform specific commands (without connecting to the device)
  junipernetworks.junos.junos_static_routes:
    config:
      - address_families:
          - afi: ipv4
            routes:
              - dest: 192.168.16.0/24
                next_hop:
                  - forward_router_address: 172.16.1.2
    state: rendered

# Task output:
# ------------
# rendered:
#   - '<nc:routing-options
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"><nc:static><nc:route><nc:name>192.168.16.0/24</nc:name>
#     <nc:next-hop>172.16.1.2</nc:next-hop></nc:route></nc:static></nc:routing-options>'

# Using parsed

# parsed.cfg
# ------------
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
#         <version>18.4R1-S2.4</version>
#         <routing-options>
#         <static>
#             <route>
#                 <name>192.168.16.0/24</name>
#                 <next-hop>172.16.1.2</next-hop>
#                 <next-hop>172.16.1.3</next-hop>
#             </route>
#             <route>
#                 <name>192.168.47.0/24</name>
#                 <next-hop>10.200.16.2</next-hop>
#             </route>
#         </static>
#     </routing-options>
#     </configuration>
# </rpc-reply>

- name: Parsed running config (without connecting to the device)
  junipernetworks.junos.junos_static_routes:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output:
# ------------
# parsed:
#   - address_families:
#       - afi: ipv4
#         routes:
#           - dest: 192.168.16.0/24
#             next_hop:
#               - forward_router_address: '[''172.16.1.2'', ''172.16.1.3'']'
#           - dest: 192.168.47.0/24
#             next_hop:
#               - forward_router_address: 10.200.16.2

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
after string	when changed	The resulting configuration model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
before string	always	The configuration prior to the model invocation. Sample: The configuration returned will always be in the same format of the parameters above.
commands list	always	The set of commands pushed to the remote device. Sample: ['command 1', 'command 2', 'command 3']
gathered list	when state is gathered	Facts about the network resource gathered from the remote device as structured data. Sample: This output will always be in the same format as the module argspec.
parsed list	when state is parsed	The device native config provided in running_config option parsed into structured data as per module argspec. Sample: This output will always be in the same format as the module argspec.
rendered list	when state is rendered	The provided configuration in the task rendered in device-native format (offline). Sample: ['<nc:protocols xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">']

Status

Authors

• Daniel Mellado (@dmellado)